Automotive Surface Mount Fuses
|
|
- Andrea Gregory
- 6 years ago
- Views:
Transcription
1 Revision of November 206 Automotive Surface Mount Fuses Quick Index: Series Size Current Rating (A) Voltage Rating Page 0.5, 0.63, 0.75,.0,.5, VAC/25VDC QA240F 240 QA206F 206 QF206F 206 QF0603F 0603 QF206H , 3.0, 3.5, 3.5, 4.0, 5.0, 6.3, 7.0, 8.0, VDC 2.0, 5.0, VDC.5,.6, 2.0, 2.5, 3.0, 3.5, 3.5, VDC 5.0, 6.3, 7.0, 8.0, 0.0, 2.0, VDC 0.5, 0.75,.0,.5,.75, VDC 2.5, 3.0, 4.0, 5.0, 6.0, 7.0, VDC 0.5, 0.75,.0,.5 63VDC 2.0, 2.5, 3.0, 3.5, 4.0, VDC VDC.0,.5, VDC 2.5, 3.0, 3.5, 4.0, 4.5, VDC 6.0, 7.0, VDC QF0603H ,.5, 2.0, 2.5, 3.0, 3.5, 4.0, 4.5, 5.0, 6.0, 7.0, VDC 20 Product Identification: Q A 206 F 2A00 T () (2) (3) (4) (5) (6) () Product type code: Q- Automotive fuse (2) Product code: A-AirMatrix Chip Fuse, F-SolidMatrix Chip Fuse (3) Dimension code: L x W (inch) The first two digits - L (length) The last two digits - W (width) (4) Characteristic code: F-fast acting, H-Slow Blow (5) Current rating code: 2A00-2.0A (6) Package code: T Tape and Reel B Bulk Recommended Land Pattern: 0.8 ( (8.60) 240 Size Inch (mm) (.50) 0.73 (4.40) 206 Size 0.07 (.80) Inch (mm) 0.03 (0.80) (2.20) 0603 Size (.00) Inch (mm) Website: & 2
2 Revision of November 206 Automotive Surface Mount Fuses Fuse Selection and Temperature De-rating Guideline: The ambient temperature affects the current carrying capacity of fuses. When a fuse is operating at a temperature higher than 25 C, the fuse shall be de-rated. To select a fuse from the catalog, the following rule may be followed: Catalog Fuse Current Rating = Nominal Operating Current / 0.75 / % De-rating at the maximum operating temperature. Example: At maximum operating temperature of 65 C, % De-rating is 90%. The nominal operating current is 4 A. The current rating for fuse selected from the catalog shall be: 4 / 0.75 / 90% = 5.9 or 6 A. Specifications and descriptions in this literature are as accurate as known at the time of publish, but are subject to change without notice. For QA Series For QF Series Packaging: Chip Size Parts on 7 inch (78 mm) Reel 0603 (608) 4, (326) (For QA206F Series) 3, (326) 3, ,000 3 Website: &
3 Revision of November 206 Automotive Surface Mount Fuses Soldering Temperature Profile: * Recommended Temperature Profile for Reflow Soldering Profile Feature Preheat/Soak Temperature Min (T smin ) Temperature Max(T smax ) Time(t s ) from (T smin to T smax ) Ramp-uprate (T L to T p ) Liquidous temperature(t L ) Time(t L ) maintained above T L Pb-Free Assembly 50 C 200 C 60~20 seconds 3 C/second max. 27 C 60~50 seconds Peak package body temperature (T p ) 260 C Time (t p )*within 5 C of the specified classification temperature (T c ) Ramp-down rate (T p to T L ) Time 25 C to peak temperature 30 seconds * 6 C/second max. 8 minutes max. * Recommended Temperature Profile for Wave Soldering * Tolerance for peak profile temperature (T p ) is defined as a supplier minimum and a user maximum Notice: Wave Soldering is suitable for 206 and 0603 size. Website: & 4
4 Revision of November 206 AirMatrix Automotive Surface Mount Fuses QA240F Series Features: Clearing Time Characteristics: Clearing time at 25 C % of current rating Min. Max. 00% 4 hours 200% ( A) 0.0 second 5 seconds 200% 0.0 second 20 seconds Agency Approval: AEC-Q200 qualified Fast acting at 200% overload current level Excellent inrush current withstanding capability Fiberglass enforced epoxy fuse body Copper or copper alloy composite fuse link Copper termination with nickel and tin plating Halogen free, RoHS compliant and 00% lead-free Operating temperature range: -55 to +25 (with derating) 00% lead-free Shape and Dimensions: Unit Inch mm L ± ± 0.5 W ± ± 0.5 Agency UL Ordering Information: File NO. E T ± ± 0.20 B ± ± 0.38 Part Number Current Rating (A) QA240FA500T 0.50 Voltage Rating Interrupting Ratings Nominal Cold DCR (Ω). Measured at 0% rated current and 25 o C ambient. 2. Melting I 2 t at 0.00 second pre-arcing time. 3. Blue Marking Character Code. Nominal I 2 t Marking (A 2 s) 2 Code C QA240FA630T S QA240FA750T D 250VAC QA240FA00T.00 25VDC E QA240FA25T F QA240FA50T A: G 250VAC QA240F2A00T I QA240F2A50T QA240F3A00T QA240F3A5T A: 25VDC 32VDC J K V QA240F3A50T QA240F4A00T VDC A: 65VDC 32VDC L M QA240F5A00T N 20.0A: QA240F6A30T VDC O QA240F7A00T VDC P QA240F8A00T R QA240F0A0T Q QA240F2A0T X QA240F5A0T VDC Y QA240F20A0T Z 5 Website: &
5 Clearing Time (s) 0.50 A 0.63 A 0.75 A.0 A.25 A.5 A 2.0 A 2.5 A 3.0 A 3.5 A 3.5 A 4.0 A 5.0 A 6.3 A 7.0 A 8.0 A 0.0 A 2.0 A 5.0 A 20.0 A Revision of November 206 AirMatrix Automotive Surface Mount Fuses QA240F Series Average Pre-arcing Time Curves: Current (A) Website: & 6
6 I 2 t (A 2 s) Revision of November 206 AirMatrix Automotive Surface Mount Fuses QA240F Series Average I 2 t vs. t Curves: A 5.0 A 2.0 A 0.0 A 8.0 A 7.0 A 6.3 A 5.0 A 4.0 A 3.5 A 3.5 A 3.0 A 2.5 A 2.0 A.5 A.25 A.0 A 0.75 A 0.63 A 0.5 A Time (s) 7 Website: &
7 Revision of November 206 AirMatrix Automotive Surface Mount Fuses QA206F Series Clearing Time Characteristics: Clearing time at 25 C % of current rating Min. Max. 00% 4 hours 250% 5 seconds Agency Approval: Agency File NO. UL E Features: AEC-Q200 qualified Fast acting at 250% overload current level Excellent inrush current withstanding capability Extremely thin body for space saving Fiberglass enforced epoxy fuse body Copper or copper alloy composite fuse link Copper termination with nickel and tin plating Halogen free, RoHS compliant and 00% lead-free Operating temperature range: -55 to +25 (with derating) 00% lead-free Shape and Dimensions: Unit Inch mm L 0.26 ± ± 0.20 W / / -0.0 T ± ± 0.5 B ± ± 0.30 Ordering Information: Part Number Current Rating (A) Voltage Rating (VDC) Interrupting Ratings Nominal Cold DCR (Ω) Nominal I 2 t Marking (A 2 s) 2 Code 3 QA206FA50T G QA206FA60T T QA206F2A00T I QA206F2A50T VDC J QA206F3A00T K QA206F3A5T V QA206F3A50T L QA206F4A00T M QA206F5A00T N QA206F6A30T O QA206F7A00T P QA206F8A00T VDC R QA206F0A0T Q QA206F2A0T X QA206F5A0T Y. Measured at 0% rated current and 25 o C ambient. 2. Melting I 2 t at 0.00 second pre-arcing time. 3. Blue Marking Character Code. 8 Website: &
8 Pre-arcing Time (s).50 A.60 A 2.00 A 2.50 A 3.00 A 3.5 A 3.50 A 4.00 A 5.00 A 6.30 A 7.00 A 8.00 A 0.0 A 2.0 A 5.0 A Revision of November 206 AirMatrix Automotive Surface Mount Fuses QA206F Series Average Pre-arcing Time Curves: Current (A) Website: & 9
9 I 2 t (A 2 s) Revision of November 206 AirMatrix Automotive Surface Mount Fuses QA206F Series Average I 2 t vs. t Curves: A 2.0 A 0.0 A 8.00 A 7.00 A 6.30 A 5.00 A 4.00 A 3.50 A 3.5 A 3.00 A 2.50 A 2.00 A.60 A.50 A Time (s) 0 Website: &
10 Revision of November 206 QF206F Series Features: AEC-Q200 qualified Multilayer monolithic structure with glass ceramic body and silver fusing element Silver termination with nickel and pure-tin solder plating, providing excellent solderability Compatible with both wave and reflow soldering processes Operating temperature range: -55 to +25 (with derating) Clearing Time Characteristics: Shape and Dimensions: Clearing time at 25 C % of current rating Min. Max. 00% 4 hours 250% 5 seconds Unit Inch mm L 0.26 ± ± 0.20 W ± ± 0.20 W L T 400% 0.05 second T ± ± 0.20 Agency Approval: B ± ± 0.25 B Agency UL File NO. E Ordering Information: Part Number Current Rating (A) Voltage Rating (VDC) Interrupting Ratings Nominal Cold DCR (Ω) Nominal I 2 t Marking (A 2 s) 2 Code 3 QF206FA500T C QF206FA750T D QF206FA00T VDC E QF206FA50T G QF206FA75T H QF206F2A00T I QF206F2A50T J 32VDC QF206F3A00T K QF206F4A00T M 32VDC QF206F5A00T N QF206F6A00T 6.0 QF206F7A00T VDC Measured at 0% rated current and 25 o C ambient. 2. Melting I 2 t at 0.00 second pre-arcing time. 3. Black Marking Character Code QF206F8A00T = Website: &
11 Pre-arcing Time(s) 0.5 A 0.75 A.0 A.5 A.75 A 2.0 A 2.5 A 3.0 A 4.0 A 5.0 A 6.0 A 7.0 A 8.0 A Revision of November 206 QF206F Series Average Pre-arcing Time Curves: Current(A) Website: & 2
12 I²t (A²S) Revision of November 206 QF206F Series Average I 2 t vs. t Curves: A 7.0 A 6.0 A 5.0 A 4.0 A 3.0 A 2.5 A 2.0 A.75 A.5 A.0 A 0.75 A 0.5 A Time(s) 3 Website: &
13 Revision of November 206 QF0603F Series Features: AEC-Q200 qualified Multilayer monolithic structure with glass ceramic body and silver fusing element Silver termination with nickel and pure-tin solder plating, providing excellent solderability Compatible with both wave and reflow soldering processes Operating temperature range: -55 to +25 (with derating) Clearing Time Characteristics: Shape and Dimensions: % of current rating Clearing time at 25 C Min. Max. Unit Inch mm L ± ± 0.5 W L 00% 4 hours 250% 5 seconds 400% 0.05 second Agency Approval: W 0.03 ± ± 0.5 T 0.03 ± ± 0.5 B 0.04 ± ± 0.5 B T Agency UL File NO. E Ordering Information: Part Number Current Rating (A) Voltage Rating (VDC) Interrupting Ratings Nominal Cold DCR (Ω) Nominal I 2 t Marking (A 2 s) 2 Code 3 QF0603FA500T C QF0603FA750T VDC D QF0603FA00T E QF0603FA50T G QF0603F2A00T I QF0603F2A50T J QF0603F3A00T K QF0603F3A50T VDC L QF0603F4A00T M QF0603F5A00T N QF0603F6A00T VDC O. Measured at 0% rated current and 25 o C ambient. 2. Melting I 2 t at 0.00 second pre-arcing time. 3. Black Marking Character Code. 4 Website: &
14 Pre-arcing Time(S) 0.5 A 0.75 A.0 A.5 A 2.0 A 2.5 A 3.0 A 3.5 A 4.0 A 5.0 A 6.0 A Revision of November 206 QF0603F Series Average Pre-arcing Time Curves: Current(A) Website: & 5
15 I 2 t(a 2 s) Revision of November 206 QF0603F Series Average I 2 t vs. t Curves: A 5.0 A 4.0 A 3.5 A 3.0 A 2.5 A 2.0 A.5 A.0 A 0.75 A 0.5 A Time(S) 6 Website: &
16 Revision of November 206 QF206H Series Features: AEC-Q200 qualified Multilayer monolithic structure with glass ceramic body and silver fusing element Silver termination with nickel and pure-tin solder plating, providing excellent solderability Compatible with both wave and reflow soldering processes High inrush melting energy (high I 2 t) Operating temperature range: -55 to +25 (with derating) Clearing Time Characteristics: Shape and Dimensions: % of current rating Clearing time at 25 C Min. Max. Unit Inch mm L 0.26 ± ± 0.20 W L 00% 4 hours 200% second 60 seconds W ± ± 0.20 T ± ± 0.20 T Agency Approval: B ± ± 0.25 B Agency UL File NO. E Ordering Information: Part Number Current Rating (A) Voltage Rating (VDC) Interrupting Ratings Nominal Cold DCR (Ω) Nominal I 2 t Marking (A 2 s) 2 Code 3 QF206HA00T E QF206HA50T VDC G QF206H2A00T I QF206H2A50T J QF206H3A00T K QF206H3A50T VDC L QF206H4A00T M QF206H4A50T T QF206H5A00T N QF206H6A00T O QF206H7A00T VDC P QF206H8A00T R. Measured at 0% rated current and 25 o C ambient. 2. Melting I 2 t at 000% of current rating. 3. Green Marking Character Code. 7 Website: &
17 Pre-arcing Time(s).0 A.5 A 2.0 A 2.5 A 3.0 A 3.5 A 4.0 A 4.5 A 5.0 A 6.0 A 7.0 A 8.0 A Revision of November 206 QF206H Series Average Pre-arcing Time Curves: Current(A) Website: & 8
18 Revision of November 206 QF206H Series Average I 2 t vs. t Curves: A 7.0 A 6.0 A 5.0 A 4.5 A 4.0 A 3.5 A 3.0 A 2.5 A 2.0 A.5 A.0 A I²t (A²S) Time(s) 9 Website: &
19 Revision of November 206 QF0603H Series Features: AEC-Q200 qualified Multilayer monolithic structure with glass ceramic body and silver fusing element Silver termination with nickel and pure-tin solder plating, providing excellent solderability Compatible with both wave and reflow soldering processes High inrush melting energy (high I 2 t) Operating temperature range: -55 to +25 (with derating) Clearing Time Characteristics: Shape and Dimensions: % of current rating Clearing time at 25 C Min. Max. Unit Inch mm L ± ± 0.5 W L 00% 4 hours 200% second 60 seconds W 0.03 ± ± 0.5 T 0.03 ± ± 0.5 T Agency Approval: B 0.04 ± ± 0.5 B Agency UL File NO. E Ordering Information: Part Number Current Rating (A) Voltage Rating (VDC) Interrupting Ratings Nominal Cold DCR (Ω) Nominal I 2 t Marking (A 2 s) 2 Code 3 QF0603HA00T E QF0603HA50T G QF0603H2A00T I QF0603H2A50T J QF0603H3A00T VDC K QF0603H3A50T L QF0603H4A00T M QF0603H4A50T T QF0603H5A00T N QF0603H6A00T O QF0603H7A00T VDC P QF0603H8A00T R. Measured at 0% rated current and 25 o C ambient. 2. Melting I 2 t at 000% of current rating. 3. Green Marking Character Code. 20 Website: &
20 Pre-arcing Time(S).0 A.5 A 2.0 A 2.5 A 3.0 A 3.5 A 4.0 A 4.5 A 5.0 A 6.0 A 7.0 A 8.0 A Revision of November 206 QF0603H Series Average I 2 t vs. t Curves: Current(A) 2 Website: &
21 I 2 t(a 2 s) Revision of November 206 QF0603H Series Average I 2 t vs. t Curves: A 7.0 A 6.0 A 5.0 A 4.5 A 4.0 A 3.5 A 3.0 A 2.5 A 2.0 A.5 A.0 A Time(S) 22 Website: &
Automotive Grade Surface-Mount Fuses
Automotive Grade Surface-Mount Fuses AEC-Q200 qualified TS6949 certified Anti-sulfur construction SolidMatrix Platform, QF series AirMatrix Platform, QA series www.aemcomponents.com / www.aemchina.com
More informationSolidMatrix 1206 Fast Acting Surface Mount Fuses
SolidMatrix 206 Fast Acting Surface Mount Fuses Features: Multilayer monolithic structure with glass ceramic body and silver fusing element Silver termination with nickel and pure-tin solder plating, providing
More informationSolidMatrix 1206 Fast Acting Surface Mount Fuses
SolidMatrix 1206 Fast Acting Surface Mount Fuses Features: Multilayer monolithic structure with glass ceramic body and silver fusing element Silver termination with nickel and pure-tin solder plating,
More informationCC06H High I 2 t Chip 0603 size fuses
Technical Data 4346 Supersedes June, 2014 Pb HALOGEN HF FREE Applications For secondary circuit protection in space constrained applications: LCD Backlight inverters Digital cameras DVD Players Bluetooth
More informationNo. Test Requirement Test Condition Test Reference. 10 cycles
*RoHS COMPLIANT & **HALOGEN FREE SinglFuse SF-1210SxxxW Series Features n Single blow fuse for overcurrent protection n 3225 (EIA 1210) footprint n Slow blow fuse n UL 248-14 listed n RoHS compliant* and
More information0.003 SF-0603S075M DC 63 V DC 63 V SF-0603S100M A SF-0603S150M SF-0603S200M
*RoHS COMPLIANT & **HALOGEN FREE E SinglFuse SF-0603SxxxM Series Features n Single blow fuse for overcurrent protection n 608 (EIA 0603) miniature footprint n Slow blow fuse (Fusing time 5 seconds at 250
More informationSinglFuse SF-1206HIxxxM Series Features
E SinglFuse SF-1206HIxxxM Series Features n Single blow fuse for overcurrent protection n 3216 (EIA 1206) footprint n High inrush current withstand fuse n UL 248-14 listed n RoHS compliant* and halogen
More informationSPECIFICATIONS, PACKAGING INFORMATION, AGENCY APPROVALS AND PART NUMBERING SYSTEMS FOR TABLE F2 FUSES
SPECIFICATIONS, PACKAGING INFORMATION, AGENCY APPROVALS AND PART NUMBERING SYSTEMS FOR TABLE F2 FUSES Table F1 Environmental Specifications for Table F2 Fuses Operating Temperature Mechanical Vibration
More information6125FF Fast-acting subminiature fuses
Fast-acting subminiature fuses Supersedes March 2015 Applications Power supplies Servers LED/LCD televisions Appliances and white goods LCD monitor/backlight inverters Laptops and notebooks Agency information
More informationCYG Wayon Circuit Protection CO., LTD.
CATALOG (2014) CYG Wayon Circuit Protection CO., LTD. CONTENTS Surface Mount Fuses 1206F Series. 2 0603F Series.5 1206S Series.8 0603S Series.11 Applications..14 Product Identification...14 Reliability
More informationFundamentals. Overview. Multi-layer Design for Chip Fuses. Wire-In-Air Design for 2410SFV, 1206SFV Fuses. Figure SF1. Figure SF2.
Fundamentals Overview TE Circuit Protection offers the widest selection of surfacemount fuses available for addressing a broad range of overcurrent protection applications. Helping to prevent costly damage
More informationSurface Mount Fuses 0603Size> Slow Blow> S0603-S Series
Revision:F Page:1 of 6 General Slow Blow 1.6mm 0.8mm physical size Thick film manufacturing method, ceramic substrate, silver fusing element -50 ~125 operating temperature Excellent environmental integrity
More informationSurface Mount Fuses 0603Size> Slow Blow> S0603-S-5.0A
Page: 1 of 6 General Slow Blow 1.6mm 0.8mm physical size Thick film manufacturing method, ceramic substrate, silver fusing element -50 ~125 operating temperature Excellent environmental integrity RoHS
More informationSinglFuse SF-0603FPxxxF Series Features. SF-0603FPxxxF Series - Fast Acting Precision Surface Mount Fuses. Electrical Characteristics
*RoHS COMPLIANT & **HALOGEN FREE H SinglFuse SF-0603FPxxxF Series Features n Single blow fuse for overcurrent protection n 1608 (EIA 0603) miniature footprint n Fast-acting precision fuse n UL 248-14 listed
More informationC308F 3 mm x 8.4 mm fast-acting, ceramic tube fuses for hazardous applications
Technical Data 4405 Supersedes October 2017 3 mm x 8.4 mm fast-acting, ceramic tube fuses for hazardous applications Agency information curus Recognition file number: E19180, Guide JDYX2/JDYX8 Applications
More informationSurface Mount Fuses 0603Size> Fast Acting > S0603-F Series
Page:1 of 6 General Fast Acting 1.6mm 0.8mm physical size Thick film manufacturing method, ceramic substrate, silver fusing element -50 ~125 operating temperature Excellent environmental integrity RoHS
More informationSurface-mount Fuses Fundamentals
Surface-mount Fuses Fundamentals Overview TE Circuit Protection offers the widest selection of surface-mount fuses available for addressing a broad range of overcurrent protection applications. Helping
More informationFeatures. Samples. I max (A) P d. typ. (W)
0805L Series RoHS Description The 0805L Series PTC provides surface mount overcurrent protection for applications where space is at a premium and resettable protection is desired. Features Agency Approvals
More informationSF-0603SP150M SF-0603SP200M SF-0603SP250M
E SinglFuse SF-0603SPxxxM Series Features n Single blow fuse for overcurrent protection n 1608 (EIA 0603) miniature footprint n Time Lag fuse n UL 248-14 listed n RoHS compliant* and halogen free** n Multilayer
More information1025HC Fast-acting, high current, surface mount ceramic tube fuses
Supersedes February 2017 Fast-acting, high current, surface mount ceramic tube fuses HALOGEN HF FREE Applications Primary and secondary circuit protection: Server and desktop power supplies Gaming console
More informationCurrent Sensing Resistor Metal Foil Type >SMF Series
Page: 1 of 6 General Chip size from 0603 to Resistance value from 3mΩ to 200mΩ Low thermal EMF. Low TCR. Lead free, RoHS compliant for global applications and halogen free Application Switching model power
More informationSpecification Status: Released
PAGE NO.: 1 OF 7 Termination Material: Copper, Ni, Tin Fuse Element: Copper/Copper alloy Body Material: Fiberglass/Epoxy Operating Temperature -55 C to +125 C (with de-rating) Specification Status: Released
More informationSurface Mount Fuses 1206 Size >Fast Acting>S1206-FA-8A~15A. General
Page: 1/ 6 General Fastacting 3.10mm 1.55mm physical size Thick film manufacturing method, ceramic substrate, silver fusing element -55 ~125 operating temperature Excellent environmental integrity RoHS
More informationSurface Mount > 1812L Series. Description. Features. Applications. I max (A) typ. (W) P d. Current (A)
1812L Series RoHS Description The 1812L Series PTC provides surface mount overcurrent protection for applications where resettable protection is desired. Features RoHS compliant, lead-free and halogen-free
More informationSurface Mount > 0603L Series. Description. Features. Applications. Maximum Time To Trip Current (A) P d typ. (W)
0603L Series RoHS Description The 0603L Series PTC provides surface mount overcurrent protection for applications where space is at a premium and resettable protection is desired. Features Agency Approvals
More informationSurface Mount Fuses 0603Size> Slow Blow> S0603-S Series
Measured I I T Surface Mount Fuses age:1 of 6 General Slow Blow 1.6mm 0.8mm physical size Thick film manufacturing method, ceramic substrate, silver fusing element o o -50 C~125 C operating temperature
More informationSURFACE-MOUNT FUSES Pulse Tolerant Chip Fuses
SURFACE-MOUNT FUSES have high inrush current withstand capability and provide overcurrent protection for DC power systems. These devices combine a silver fusing element and monolithic, multilayer design
More informationSurface Mount > 1210L Series. Description. Features. Applications. Maximum Time To Trip Current (A) P d typ. (W) Time (Sec.)
1210L Series RoHS Description The 1210L Series PTC provides surface mount overcurrent protection for applications where space is at a premium and resettable protection is desired. Features Agency Approvals
More informationn For use in telecommunication circuit applications requiring low current protection with high surge tolerance
*RoHS COMPLIANT & **HALOGEN FREE 0.5 SinglFuse SF-3812TM-T Series Features n Replacement for Bourns Telefuse models B0500T, B1250T and B2000T n For use in telecommunication circuit applications requiring
More informationFeatures. V max (Vdc) I max (A) typ. (W) P d
2016L Series RoHS Description The 2016L Series PTC provides surface mount overcurrent protection for low voltage ( 60V applications where resettable protection is desired. Features RoHS compliant, lead-free
More informationPOLY-FUSE Resettable PTCs. 2920L Series. Surface Mount > 2920L Series E R RoHS. Description
2920L Series RoHS Description The 2920L Series PTC provides surface mount overcurrent protection for medium voltage ( 60V applications where resettable protection is desired. Features RoHS compliant, lead-free
More informationSinglFuse SF-1206HVxxM Series Features
*RoHS COMPLIANT & **HALOGEN FREE V SinglFuse SF-1206HVxxM Series Features n Single blow fuse for overcurrent protection n 3216 (EIA 1206) footprint n High voltage rating applications n High current rating
More informationC310FH 3.1 mm x 10 mm Fast-acting, axial lead ceramic tube fuses
Technical Data 10405 3.1 mm x 10 mm Fast-acting, axial lead ceramic tube fuses Pb HALOGEN HF FREE Applications Primary circuit protection: Power supplies LED and general lighting Consumer electronics Desktop,
More informationS505SCH 5 x 20 mm Time-delay, high I 2 t, axial lead, ceramic tube fuses
Technical Data 10401 5 x 20 mm Time-delay, high I 2 t, axial lead, ceramic tube fuses Pb HALOGEN HF FREE Applications Primary circuit protection: Power supplies LED lighting LED/LCD televisions Appliances
More information74 ( ) 127 ( ) A [0,315] 2,20 [0,079] [0,087] 1,60 [0,063] Land Pattern
A FEATURES Shielded Construction with very low DCR Heating Current rating up to 17.9 Amps Saturation Current rating up to 7.5 Amps (based on only 10% inductance drop) Inductance up to 1mH for all case
More informationSURFACE-MOUNT FUSES Slow-Blow Chip Fuses
SURFACE-MOUNT FUSES Available in industry standard 206 and 0603 chip sizes, Littelfuse slow-blow chip fuses help provide overcurrent protection on systems that experience large and frequent current surges
More informationPLED Ultra Low Holding Current Series
RoHS Description Agency Approvals This PLED ultra-low holding current series exhibits a low holding current parameter that makes it compatible with LED lighting strings. The series provide a switching
More informationS505SC 5 x 20 mm Time-delay, axial lead ceramic tube fuses
Supersedes September 2013 5 x 20 mm Time-delay, axial lead ceramic tube fuses Pb Product description Time-delay, high breaking capacity Designed to IEC 60127-2 Nickel-plated brass end cap construction
More informationSURFACE-MOUNT FUSES Slow-Blow Chip Fuses
SURFACE-MOUNT FUSES Available in industry standard 206 and 0603 chip sizes, Littelfuse slow-blow chip fuses help provide overcurrent protection on systems that experience large and frequent current surges
More informationSPHV-C Series 200W Discrete Bidirectional TVS Diode
SPHV-C Series W Discrete Bidirectional TVS Diode RoHS Pb GREEN Description The SPHV-C series is designed to replace multilayer varistors (MLVs) in portable applications, LED lighting modules, and low speed
More informationAQxxC Series 450W Discrete Bidirectional TVS Diode
AQxxC Series 5W Discrete Bidirectional TVS Diode RoHS Pb GREEN Description The bidirectional AQxxC series is designed to replace multilayer varistors (MLVs) in electronic equipment for low speed and DC
More informationMPI2520 High Current, Low Profile, Miniature Power Inductors HALOGEN FREE
Technical Data 10199 MPI2520 High Current, Low Profile, Product description: Pb Halogen free, lead free, RoHS compliant 125 C maximum total temperature operation 2.7 x 2.2 x 1.0 / 1.2mm maximum surface
More information1 8 WK L_V_AUTO_V01 FEB
WK12L, WK20L, WK25L 1%, 5% Thick Film Power Chip Resistor Wide Termination RoHS compliant and Halogen free Size 0612, 1020, 1225 Automotive AEC Q200 Compliant ASTM B-809-95 Compliant *Contents in this
More informationMeiLong Electronic Co.,Ltd. Lead Free Thin Film Chip Fuse. 1. Scope. 2. Construction. 3. Type Designation. Over Coat Conductor.
Lead Free Thin Film Chip Fuse Page 1/20 1. Scope This specification applies for the Lead-Free fuse se ries of thin film chip fuse made by ML. 2. Construction Over Coat Conductor Sn Plating Ceramic Substrate
More informationFUZETEC TECHNOLOGY CO., LTD.
NO. PQ18-01ER Product Specification and Approval Sheet Version A9 Page 1/5 Surface Mountable PTC Resettable Fuse: FSMD1206 Series 1. Summary (a) RoHS Compliant & Halogen Free (b) Applications: All high-density
More informationGas Discharge Tubes SL1002A Series
SL12A Series SL12A Series RoHS Agency Approvals AGENCY AGENCY FILE NUMBER E128662 2 Electrode GDT Graphical Symbol Additional Information Description The Broadband Optimized SL12A series has been especially
More informationEngineering Product Specification C310T-SC Series Ceramic tube, Time delay
Engineering Product Specification C310T-SC Series Ceramic tube, Time delay Printed on: 4/14/2015 Page 2 of 14 Technical Specification Approvals Functional Area Engineering Manager Product Manger Signature(s)
More informationAQHV Series 200W Discrete Unidirectional TVS Diode
AQHV Series W Discrete Unidirectional TVS Diode RoHS Pb GREEN Description The AQHV series is designed to provide an option for very fast acting, high performance over-voltage protection devices. Ideally
More informationSurface-mount Fuses Fundamentals
Surface-mount Fuses Fundamentals Overview TE Circuit Protection offers the widest selection of surface-mount fuses available for addressing a broad range of overcurrent protection applications. Helping
More informationDear Customer, Terms & Conditions for last Time Buy. Best Regards. Meng Wang. Product Manager, Tel: EXT 7955
Littelfuse, Inc. 8755 West Higgins Road, Suite 5 Chicago, IL 6631 USA (773) 628-1 7.1,218 RE: LFPCN41214 From: Littelfuse Product Management Team Dear Customer, Please be aware that Littelfuse is discontinuing
More informationPositive Temperature Coefficient (PTC) Data Sheet
Positive Temperature Coefficient (PTC) Data Sheet Description The 0805 series provides miniature surface mount resettable overcurrent protection with holding current from 0.1A to 1.1A. This series is suitable
More informationFP1008R5 and FP1008R6 High frequency, high current power inductors
Technical Data 152 Effective April 217 FP18R5 and FP18R6 High frequency, high current power inductors Applications Multi-phase and Vcore regulators Voltage Regulator Modules (VRMs) and high power density
More informationProduct Specification
Product Name : AEM Part Number : ES0402V014CT Customer : Customer Revision: 2 Date: 2011-09-08 AEM Components (Suzhou) Co., Ltd 458 Shenhu Road, Suzhou Industrial Park Jiangsu, P.R China, 215122 TEL: 86-512-6258-0028
More information2920L Series. POLY-FUSE Resettable PTCs. Surface Mount > 2920L Series. Description
RoHS Description The PTC provides surface mount overcurrent protection for medium voltage ( 60V) applications where resettable protection is desired. Features RoHS compliant, lead-free and halogen-free
More informationStandard Reflow Profile for Standard Lead-Free Packages
Standard Reflow Profile for Standard Lead-Free Packages Standard Reflow Profile for Standard Lead-Free Packages Document Revision 1.1 December, 2017 1 of 6 Table of Contents 1 INTRODUCTION... 3 REVISION
More informationGas Discharge Tube (GDT) Products CG/CG2 Series. CG/CG2 Series
Description Littelfuse highly reliable GDTs provide a high degree of surge protection in a small size ideal for board level circuit protection. GDTs function as switches which dissipate a minimum amount
More informationTransient Voltage Suppression Diodes SMTO ka > LTKAK6 series. Description. Features. Test Current I T. Reverse Breakdown Voltage (V BR I T
SMTO-218-6 ka > LTKAK6 series LTKAK6 Series RoHS Pb e3 Description The LTKAK6 series offers superior clamping characteristics over standard S.A.D. technologies by virtue of the Littelfuse Foldbak technology,
More informationMetal-Oxide Varistors (MOVs) Surface Mount Multilayer Varistors (MLVs) > MLA Automotive Series
MLA Automotive Varistor Series RoHS Description The MLA Automotive Series of transient voltage surge suppression devices is based on the Littelfuse Multilayer fabrication technology. These components are
More informationTablet PC Automotive applications Printer Security systems VOP (V) Ibreak (A)
Description Current Limiting Module (CLM) is a chip type surface mountable device that can protect against both overcurrent and overcharging. It comprises a fuse element to ensure stable operation under
More informationAutomotive Grade Thin Film Chip Resistors
FEATURES PRECISE TOLERANCE AND TEMPERATURE COEFFICIENT EIA STANDARD CASE SIZES (0402 ~ 2512) AEC-Q200 QUALIFIED FOR AUTOMOTIVE APPLICATIONS LOW NOISE, THIN FILM (NiCr) CONSTRUCTION TEMPERATURE RANGE -55
More informationSUPPRESSION CAPACITORS SURFACE MOUNT FUSES
SUPPRESSION CAPACITORS SURFACE MOUNT FUSES MKP 338 SERIES INTERFERENCE SUPPRESSION X2 CAPACITORS (CONT.) Cap. (µf) Lead Spacing Lead Length Stock No. 1-9 10-99 00-999 2222 338 2214 0.1 1mm mm 96B2300 0.43
More informationMetal Film MELF Resistors
FEATURES SURFACE MOUNT IN SIZES 0102 (0805), 0204 (1406) AND 0207 (2410) AVAILABLE IN PRECISION TOLERANCE AND TC (TO ±0.1% TOL. AND ±10PPM TC) ALL SIZES ARE AVAILABLE IN TAPE/REEL FOR AUTOMATIC MOUNTING
More informationWK25S WK20S WK10S WK12S WK08S WK06S. Thick Film Power Surge Chip Resistors AEC Q-200 Qualified Size 2512, 2010, 1210, 1206, 0805, 0603
WK25S WK20S WK10S WK12S WK08S WK06S ±5% 5%, ±10 10%, ±20 20% Thick Film Power Surge Chip Resistors AEC Q-200 Qualified Size 2512, 2010, 1210, 1206, 0805, 0603 *Contents in this sheet are subject to change
More information5 x 20mm Fuses S500 Series, Fast-Acting, Glass Tube
5 x 20mm Fuses S500 Series, Fast-Acting, Glass Tube Fast-acting, low breaking capacity Optional axial leads available 5 x 20mm physical size Glass tube with silver-plated (32-125mA) and nickel-plated (160mA-10A)
More informationPlatinum-chip Temperature Sensors in SMD Design Type According to DIN EN 60751
Data Sheet 906125 Page 1/5 Platinum-chip Temperature Sensors in SMD Design Type According to DIN EN 60751 Design type PCS/PCF For temperatures from -50 to +150 C (-70 to +250 C) In accordance with DIN
More informationRadial Leaded PTC Resettable Fuse : FRX F
Radial Leaded PTC Resettable Fuse : FRX 050-60F 1. Summary (a) RoHS Compliant (Lead Free) Product (b) Applications: Wide variety of electronic equipment (c) Product Features: Low hold current, Solid state,
More informationType AHA SMT Aluminum Electrolytic Capacitors -55 C to +105 C - Long Life
Long Life Filtering, Bypassing, Power Supply Decoupling Capacitors deliver twice the life of many SMT aluminum capacitor types, and they handle high levels of ripple current. The AHA can handle the ripple
More informationMultilayer Acrylic Polymer Film Capacitors
FEATURES HIGH CAPACITANCE (UP TO 22μF) WIDE VOLTAGE & TEMPERATURE RANGE (16 ~ 100V, -55 C ~ +125 C or ±105 C) UPGRADE PERFORMANCE VS. MLCC's STABLE OVER FREQUENCY, TEMPERATURE & VOLTAGE NO PIEZO ELECTRIC
More informationRadial Leaded > 72R Series. Description. Features. Applications. Maximum Time To Trip Current (A) P d typ. (W)
72R Series RoHS * Description The 72R Series is designed to provide overcurrent protection to 72Vdc maximum voltage with a maximum 40A short circuit rating. Features 72Vdc max voltage w/max 40A short circuit
More informationHigh Current, High Frequency Power Inductors HCM1103 Series
High Current, High Frequency Power Inductors HCM1103 Series HALOGEN HF FREE Pb Description Halogen free, lead free, RoHS compliant 125 C maximum total temperature operation 11.5 x 10.3 x 3.0mm maximum
More informationCoiltronics HCM1104 Series High current power inductors
Supersedes March 2012 Coiltronics High current power inductors Applications Voltage Regulator Module (VRM) Multi-phase regulators Point-of-load modules Desktop and server VRMs and EVRDs Base station equipment
More informationKLKD SERIES 10x38 FUSES
KLKD SERIES 0x FUSES 0 Vac/dc /0- A Fast Acting Description The KLKD fuse series is fast-acting with a high DC voltage rating. This family of Midget style fuses (0 x mm) is used in solar combiner boxes
More informationFeatures. P d typ. (W) I max (A) 1206L012 A X X 1206L016 B
RoHS Description The PTC provides surface mount overcurrent protection for applications where space is at a premium and resettable protection is desired. Features Agency Approvals AGENCY AGENCY FILE NUMBER
More informationHigh Current Power Inductors HCM1104 Series
High Current Power Inductors HCM1104 Series HALOGEN HF FREE Pb SMD Device Description Halogen free, lead free, RoHS compliant 125 C maximum total operating temperature 11.5x 10.3 x 4.0mm maximum surface
More informationGlass Encapsulated SMD Varistor MLV
(VJ12, 2, 13, 14, 15, 32) Transient Voltage Suppression, ESD Protection Devices & EMI Devices GENERAL DESCRIPTION AVX s Professional Multilayer Varistors include 3 series of glass coated products as listed
More informationFSMD Page 8-12
OVERVIEW FRX... Page 2-4 FRU... Page 5-7 FSMD 2920... Page 8-12 FSMD 1210... Page 13-15 FSMD 1206... Page 16-18 FSMD 0805... Page 19-21 3 1 Radial Leaded PTC Resettable Fuse : FRX Series 1. Summary (a)
More informationTVS Diode Arrays (SPA Diodes) SP2502L Series 3.3V 75A Diode Array. Lightning Surge Protection - SP2502L Series. RoHS Pb GREEN.
SP202L Series 3.3V 7A Diode Array RoHS Pb GREEN Description The SP202L provides overvoltage protection for applications such as 0/00/000 Base-T Ethernet and T3/ E3 interfaces. This device has a low capacitance
More informationAUML Varistor Series. Surface Mount Varistors
The AUML Series of Multilayer Transient Surge Suppressors was specifically designed to suppress the destructive transient voltages found in an automobile. The most common transient condition results from
More information*See Part Number System for Details SPECIFICATIONS. Case Dimensions Type Case Size P 2 NFCC04
FETURES RECTNGULR PCKGE ITH METL STRIP FUSE ELEMENT EI SIZES 42, 63, 85 ND 126 CURRENT RTINGS FROM.2 ~ 5. MPS SFETY STNDRD PPROVL (UL and c-ul File Number E32168) Pb-FREE COMPTILE ITH FLO ND REFLO SOLDERING
More information0.15 +/ (0.006" +/ ) / (0.033" +/ ) / (0.088" +/ ") 1.91 (0.075") 1.09 (0.043") 0.91 (0.
Note: For wave solder, increase the spacing in both the horizontal Surface Mount Polymeric.66 and Electrostatic +/- vertical.6 dimensions by Discharge Suppressors.54 (.") where denoted by an asterisk (*).4
More informationWW25X, WW18X, WW12X, WW08X, WW06X ±1%, ±5% Thick Film Current Sensing Chip Resistors Size 2512, 1218, 1206, 0805, 0603 (Automotive)
WW25X, WW18X, WW12X, WW08X, WW06X ±1%, ±5% Thick Film Current Sensing Chip Resistors Size 2512, 1218, 1206, 0805, 0603 (Automotive) *Contents in this sheet are subject to change without prior notice. Page
More informationCoiltronics HCM0703 Series High current power inductors
Supersedes September, 2010 Coiltronics HCM0703 Series High current power inductors Applications Voltage Regulator Module (VRM) Multi-phase regulators Point-of-load modules Desktop and server VRMs and EVRDs
More informationSubject: SPF 25A and 30A Product Update. Date: May 1, 2017
W. Higgins Road Suite 0 Chicago, IL www. Subject: SPF A and A Product Update Document# LFPCN_PG00 Date: May, This letter is to inform Littelfuse Sales, Sales Support & our valued Customers of updates to
More informationHigh Current Power Inductors HCM1104 Series
High Current Power Inductors HCM1104 Series HALOGEN HF FREE Pb SMD Device Description Halogen free, lead free, RoHS compliant 125 C maximum total operating temperature 11.5x 10.3 x 4.0mm maximum surface
More informationWW12W ±1%, ±5% Size W. Thick Film High Power Low Ohm Chip Resistors. Approval sheet
±1%, ±5% Thick Film High Power Low Ohm Chip Resistors Size 1206 1W *Contents in this sheet are subject to change without prior notice. Page 1 of 6 ASC 1W TC200_V01 DEC - 2015 FEATURE 1. High power rating
More informationHigh Power Low Ohm Chip Resistors. Size W, W, /2W
WW25P, WW20P, WW12P ±1%, ±5% 47mΩ~976mΩ High Power Low Ohm Chip Resistors Size 2512 2W, 2010 1W, 1206 1/2W *Contents in this sheet are subject to change without prior notice. Page 1 of 7 ASC_WW25P-20P-12P_V08
More informationSPF SERIES SOLAR FUSES
Vdc - A Specifications Voltage Rating VDC Amperage Rating,,,.,,,,, 0,,,,, Max. Interrupting Rating ka - A - A ka - A - A Time Constant ms Material Body: Melamine Caps: Copper Alloy Approvals UL - Listed
More informationWA04X, WA06X ±1%, ±5%, Convex Type General purpose chip resistors array
WA04X, WA06X ±1%, ±5%, Convex Type General purpose chip resistors array Size 0402x4, 0603x4 (8p4R) (Automotive ) Page 1 of 8 ASC_WAxxX_J_V05 May.2011 FEATURE 1. Small size and light weight 2. Reduced size
More informationFeatures 60R010X & 60R017X. P d typ. (W) I max (A) V max (Vdc)
60R Series RoHS * Description The 60R Series radial leaded device is designed to provide overcurrent protection for ( 60V) applications where space is not a concern and resettable protection is preferred.
More informationFeatures. Continuous AUML Series Units. ) 1.5 to 25 J Jump Start Capability (5 minutes), (V JUMP. ) 48 V Operating Ambient Temperature Range (T A
AUML Varistor Series RoHS Description The AUML Series of Multilayer Transient Surge Suppressors was specifically designed to suppress the destructive transient voltages found in an automobile. The most
More information1 7 ASC_WF06A_V01 NOV
WF06A 1 ~ 1Mohm ±5%, ±1% High Power Chip Resistors Size 0603 1/4W *Contents in this sheet are subject to change without prior notice. Page 1 of 7 ASC_WF06A_V01 NOV - 2015 FEATURE 1. Small size and light
More informationAxial Lead & Cartridge Fuses 5 20 mm > Time-Lag > 215 Series
5 20 mm > Time-Lag >, 5 x 20 mm, Time-Lag (Slo-Blo ) Fuse Description 5x20mm Time-Lag surge withstand ceramic body cartridge fuse designed IC specification Features International (IC ) Standards for use
More informationNTC Thermistor:TTC05 Series
Features 1. RoHS compliant 2. Halogen-Free (HF) series are available 3. Body size: Ф5mm 4. Radial lead resin coated 5. Operating temperature range: -30 ~+125 6. Wide resistance range 7. Cost effective
More informationCCFL Transformers Cold cathode fluorescent lamp inverter transformers
Supersedes March 2007 Cold cathode fluorescent lamp inverter transformers Applications CCFL power supplies Environmental data Storage temperature range: -40 C to +85 C Operating ambient temperature range:
More informationCHIP FUSE; RECTANGULAR TYPE. RoHS COMPLIANCE ITEM Halogen and Antimony Free
Spec. No.: HFC K HTS 0001 /3 Date: 2017. 1. 10 Specification Title: Style: CHIP FUSE; RECTANGULAR TYPE HFC32[Optional code:ag] RoHS COMPLIANCE ITEM Halogen and Antimony Free Product specification contained
More informationCGA Series Automotive Grade Capacitors
CGA Series Automotive Grade Capacitors Type: CGA2 [EIA CC0402] CGA3 [EIA CC0603] CGA4 [EIA CC0805] CGA5 [EIA CC1206] CGA6 [EIA CC1210] Issue date: April 2011 TDK MLCC US Catalog REMINDERS Please read before
More informationAnti-Surge Thick Film Chip Resistors
FEATURES EXCELLENT ANTI-SURGE & ANTI-SULFUR CHARACTERISTICS AEC-Q200 QUALIFIED RATED POWER UPGRADE IN SMALLER PACKAGE SIZE AVAILABLE IN ± TOLERANCE BOTH FLOW SOLDER AND REFLOW SOLDERING ARE APPLICABLE
More informationLgD Series Global Pro-tection Fuses 600 Volts AC Time Delay Amperes
LgD Series Global Pro-tection Fuses 0 Volts AC Time Delay - -00 Amperes The Global Pro system is designed to save valuable space in a crowded panel while providing designers with the flexibility of a universally
More informationSM Series 400W TVS Diode Array
General Purpose ESD Protection - SM5 through SM3 SM Series W TVS Diode Array RoHS Pb GREEN Description The SM series TVS Diode Array is designed to protect sensitive equipment from damage due to electrostatic
More informationRefer to CATALOG NUMBERS AND RATING. Fusing within 1 min if the current is 200% of rated current. K A B N A
TYPE KAB Type KAB micro fuse is designed for circuit protection against excessive current in portable electronic equipment, electronic circuit around battery, etc. because the demand for high capacity
More information