Surface Mount Fuses 1206 Size >Fast Acting>S1206-FA-8A~15A. General

Transcription

1 Page: 1/ 6 General Fastacting 3.10mm 1.55mm physical size Thick film manufacturing method, ceramic substrate, silver fusing element -55 ~125 operating temperature Excellent environmental integrity RoHS compliant Halogen-free Leadfree Agency / Certificate Information Agency File Number Ampere Range E A~15A E A~15A Application Battery pack PC related equipment and peripherals (Hard driver, Printer, etc.) Digital camera (Digital still camera) Game equipment LCD monitor, LCD modules Wireless base station Power supply Medical device Electrical Specifications Part Number Marking Current Rating (A) Voltage Rating (V) Interrupting Rating (V) Typical Cold DCR* (mω) Typical I 2 T ** (A 2 s) S1206-FA-8.0A S1206-FA-10.0A A S1206-FA-12.0A V DC S1206-FA-15.0A * Measured at 10% rated current and 25 ** Melting I 2 T at 10 times of rated current

2 Page: 2/ 6 Catalo Part Number Information S 1206 FA 15.0A 15.0A Ampere Rating: 15A FA Electrical Characteristic: FA = Fast acting 1206 Size Number S SymbolofSART Shape Dimensions & Dimensions: Type L W T B S ± ± ± ±0.20 Recommended Land Patterns Materials D A Components Material C Body Terminations Element Ceramic Silver over plated with tin (100%) Silver or Silver/Palladium B Dimensions A B C D Spec 2.00± ± ± ±0.30 Dimensions of Standard Test Board Type Ampere Rating Board Thickness Copper Layer Thickness Copper Trace Width S A~10.0A A~15.0A

3 Page: 3/ 6 Time Current Curve: I 2 TVSTimeCurve A 10.0A 12.0A 15.0A A 12.0A 10.0A 8.0A Time (s) I 2 T (A 2 s) E Current (A) 0.1 1E Time (s) Electrical Characteristics Type Ampere Rating % of Current Rating Opening Time S A~15.0A 100 >4hours 8.0A~15.0A 350 5sec Temperature Derating Curve

4 Page: 4/ 6 Product Characteristics Item Test condition/ Methods Performance Standard Time/Current 100% of current rating No Fusing, 4hours Min. UL % of current rating 5sec SART SPEC. Voltage Drop 100% of current rating Deviation between the mean value: <15% IEC Endurance Test Repeating 100 cycles of 1In for 1h ON, for 15min OFF, then following by 1h of 1.25In and testing Temperature rise R :<10% T<75 IEC Interrupting Ability 150A 32V DC without permanent arcing, ignition and bursting of fuse link UL IEC Solderability 240 ±5, 3sec±0.5sec 95% coverage Min. IEC IEC ; Resistance to Soldering 260 ±5, 10sec±0.5sec R :<10% Legible appearance Method 210 Bending Test Distance between holding points: 90mm Bending: 1mm, time: 10sec R :<10% No mechanical damages IEC High Temperature Operating Life T=70 ±2, 60%In,96hours R : <10%; No fusing Method 108 Humidity (Steady State) T=40 ±2, 90%~95%RH, 1000hours R : <10% Method 103 Low Temperature Storage High Temperature Storage T=-55 ±3,96hours R : <10% IEC T=125 ±2,96hours R : <10% IEC Salt Spray 5% salt solution,48hours R : <10% Legible appearance Method 101 Thermal Shock 100 cycles between -65 / minutes, each extreme R : <10%R No mechanical damages IEC

5 Page: 5/ 6 Recommended Solder Curve 1. Infrared Reflow: Temperature: 260 Time:5secMax. Recommend Reflow profile Profile Feature Pb-Free Assembly Average Ramp-up Rate(Tsmax to Tp) 3 /sec Max. Preheat 150 Temperature Min.(Tsmin) 200 Temperature Max.(Tsmax) Time(Tsmin to Tsmax) 60sec~120sec Peak Temperature(Tp) 260 Time within 5 of actual Peak Temperature(Tp) 5sec Melting tin time(tl) 20sec~30sec Ramp-down Rate Time 25 to peak Temperature 6 /sec Max. 8minutes Max. 2. Wave soldering 3.Hand Soldering Reservoir Temperature: 260 Temperature: 350 Time in Reservoir: 10secMax. Time: 5secMax. Packaging 5000 pieces of fuses in emboss taper and reeled on a 178mm(7 inch) reel. Type A B W E F Spec 3.50± ± ± ± ±0.05 Type P P0 P1 D0 T Spec 4.00± ± ± ± ±0.10

6 Page: 6/ 6 Type M W T A B C D Spec ± ± ± ± ± ± ±2.00 Storage: The ambient temperature recommended for storage shall be between 5 ~30 The relative humidity recommended for storage shall be between 25%RH~60%RH Sealed plastic bags with desiccant shall be used to reduce the oxidation of the termination and shall only be opened prior to use The products shall not be stored in areas where harmful gases containing sulfur or chlorine are present