PLEASE NOTE: Inspections shall only be arranged if tentative price agreements have been reached between buyer and seller, subject to inspection.

Transcription

1 Machinery Listings Complete Plant Benninger Finatex International: Please ask for details at: Reference: Cost: 0 Terms: SEE -BENNINGER DIRECT WARPING AND SIZING PLANT YEAR 2003 MAKE: BENNINGER YEAR: 2003 A) BENNINGER DIRECT WARPING MACHINE 1800mm YEAR 2003 MODEL: BEN-DIRECT WORKING WIDTH: 1800mm BEAM FLANGE DIA 1200mm BENNINGER V-CREEL BENNINGER CLEAN-VAC SYSTEM B) BENNINGER SIZING MACHINE YEAR 2003 YEAR: 2003 MODEL: BEN-SIZE TEC 24 BEAMS CREEL 2 X SIZE BOX DOUBLE DIP AND DOUBLE NIP 14 DRY CANS OUT OF WHICH 10 ARE TEFL COATED HEADSTOCK WIDTH: 3400mm WITH MAX FLANGE DIA 1200mm SIZING KITCHEN MAKE BENNINGER WITH 1 COOKER AND 1 MIXER EXCELLENT CDITI QUANTITY: 1 Price: Euro Location: Europe Finishing Multiple

2 Reference: Cost: 0 Terms: Re :1X Used Sucker Muller Sizing machine S 422 Y.O.C composed by: 1 Headstock of max. width 3200 mm (Beamer: WR-CE) complete Size kitchen with tanks Creel for beam with pneumatic brake system of 22 positions 2 x Sizing box SD-40: 2 x double squeeze + 2 x double deep Squeeze 40 KN, max. speed: 125 m/min. Cylinder wide: 2000 mm useful wide: 1800 mm 1 final drying section: composed by: 12 teflonized cylinders. Heat recovery system Machinery running only on 5days / 2 shifts! Further Data / Dimensions: 1. Total dimensions of the machine for installing : - sizing machine: Lenghth: 30 mtr; Width: 5 mtr; Height: 4,5 mtr. - cocking installation:length: 3,5 mtr; Width: 3,5 mtr: Height: 4,0 mtr. - heat recovery: Lenght: up to 8,0 mtr: Width: 2,5 mtr: Height: 4,5 mtr. - to be installed parallel to the sizing machine 2. Steam and Energy consumption - steam needed to generate to supply the machine: - installed steam pressure: 7,0 bar - nominated electric power: 30 KW for the sizing machine; 11 KW for the heat recovery system 3. Height of each of three position on the creel: 64cm; 153cm; 242cm 4. consumption of steam / m3 per hour : kg/h Re : 1X Used Benninger Direct Warper BENDIRECT-ZE-C Z- GE GCF-768 Y.O.C. 1985, Working width 1800 mm 50 beams mm flange diameter max. speed: 900 m/min. Creel in V-form model GE - Y.O.C. 1987: positions 768 max. diameter: 255 mm Slasher

3 Reference: 4749 Cost: 0 Terms: No Name Slasher 01 ROTAL / MASTER Denim Slasher dyeing line YOC 2007 Entry Creel for 12 Beams, dia: H 1500 mm pneumatic brake system 01 Section for Soda and pre dyeing with padder (10 ton) H 1800mm 01 Air section with drum dryer 6 drums dia. 800 mm H 2000 mm 01 Washing section with padder (10 ton) H 1800 mm 08 Sections for dyeing with intermediate padder (10 ton) H 1800 mm 01 Section Dryer with 6 drums dia 6 00 mm H 1800 mm 01 Steamer section 02 Sections washing and fixation intense (ECO WASH) system with padder (10 ton) H 1800 mm 01 Section washing & fixation with padder (10ton) H 1800 mm 01 Nonstop accummulator with 135 meter contain 01 PRE Dryer with 11 drums dia. 800 mm H 2000 mm 01 Sizing unit with double nip H 2000 mm 01 Dryer, 13 drums dia. 800 mm H 2000 mm 01 Beaming section for beams max. Dia: mm H 3000 mm Reference: Cost: 0 Terms: SEE Sucker Muller -BRAND: Indigo Slasher Dyeing Machine(1992 YEAR OF MANUFACTURE) MACHINE SPECIALITY:WARP DYEING WARP WIDTH: 150cm MACHINE TOTAL LENGTH: 68 meter MACHINE MAX HEIGHT: 510 cm CREEL AMOUNT: 2 SETS BEAM NUMBER: 16 SET/CREEL BEAM DIAMETER: 150 cm TOTAL BATH NUMBER : 14 SETS ( 9 BATH DYEING; 1 BATH WETTING;4 SETS WASHING) BATH VOLUME: 750 lt PAINT INPUT AND PAINT OUTPUT SQUEEZER:KUSTERS OTHER PRESSURES: DOWN PRESSURE:KROM COVERED MIRROR SURFACE ROLLER UP PRESSURE:RUBBER MERDANE PAINT OXIDATI METHOD: RAPİD SKY TOTAL 7 SETS ACCUMULATOR CAPACITY: 160 meter DYEING DRYING ROLLER: 10 sets SIZING BATH: DOUBLE PUTTING IN AND DOUBLE SQUEEZER FLOTE CAPACITY: 650 liter SIZING DRYING DRUM NUMBERS: 16 Sets ROTAL(WEAVING BEAM TURN) MACHINE: WEAVING BEAM DIAMETER: 100 cm Max TRANSFER TURN WIDTH: 220 cm DYEING KITCHEN: 1 SET PAINT PREPARATI TANK 1000 lt 1 SET PAINT DOSING TANK 2000 lt 1 SET WETTING PREPARATI TANK 2000 lt 1 SET CIRCULATI TANK 5000 lt SIZING PREPARATI KITCHEN : 1 SET SIZING COOKING TANK 1000 lt 600,000 usd, ex works

4 Reference: 9759 Cost: 0 Terms: SEE -1 Nos. Sizing machine SUCKER-MULLER WR Old Price: EUR CFR New price: EUR CFR Year sizing boxes of 2000 mm each creel 16 beams, head stock max cylinders: 9 Teflon + 3 Steel Slasher Reference: Cost: 0 Terms: SEE SUCKER MULLER SLASHER Model: ZS-12, 2003 year 10 beam Creel 1000 Mm Maximum beam diameter Maximum beam width 1800 Mm Beam to Beam system for sectional warping Size box with 2 squeezers and 2 submersible cylinders of 2000 Mm. Pre wetting box 12 drying cylinders with 800 Mm diameter and 2000 Mm long. Eight Teflon coated 150 Mts/min maximum working speed Mahlo speed regulator and residual moisture control Preparation kitchen that holds 1000 Liters and a reserve tank of 750 Liters Max. width 2850 Mm Max diameter of output cylinder: 1250 Mm Touchscreen control monitor. Price Ex works $90,000 Loading: 3-40 HC Status: In production, will stop soon Delivery: Immediate Location: S. America mill floor Benninger Reference: 7347 Cost: 0 Terms: -. BENNINGER SIZING ZELL 1800 MM Year: 1992 Type: UZ4/4/4. EK/EK/ZBW 16ZR 160/63 Beam Creel Cap: 16 No of Size Boxes: 2 No of Drying Cyl: 12 Working width: 1800 mm Max Beam width: 1900 mm Dia H/S: 1800 mm Size Cooker: 1000 ltr Size Ztrorage: 1000 ltr Spares: 1 x squeezing roll, 1 x imerson roll, 1 x Bottom roll Please consider: If prices or commissions are mentioned, they do not include commission for us or any agents. We kept the message original!!!

5 Reference: Cost: 0 Terms: Santa Clara (Benninger) Sizing Machines (Slashers) Model WN.10 Headway 160 inches Wide Delivery Roller (4 Meter) 2 Size Boxes 112 inches ( 285cm) Width 12 Dry Cans 110 inches (280cm) Enclosed 16 Beam Creel Moisture Monitors & Temperature Monitors With Drives & Control Panels With 1 Size Cooking Kettle Year: 1994 Price: F.O.T. USD 395, Santa Clara (Benninger) Sizing Machines (Slashers) Model TZ.G.4 Headway 160 inches Wide Delivery Roller (4 Meter) 1 Size Boxe 112 inches ( 285cm) Width 8 Dry Cans 110 inches (280cm) Enclosed 16 Beam Creel Moisture Monitors & Temperature Monitors With 2 Control Panels With 1 Size Cooking Kettle Year: 1994 Price: F.O.T. USD 395,000.00

6 Reference: Cost: 0 Terms: SEE Benninger High Speed Direct Warper Model Ben-Direct 54 inches Warping width With pressure Roller With Zig Zag Reed and Lint screen Benninger V Creel 600 Running Ends 600 reserve Ends Inside Loading & Outside Discharge Benninger Ben-Gard Electron stop motion Benninger Ben-Tens Tension units Automatic cutters Package holders at 16 inch vertical & horizontal centers Year of manufacture: 2001 Tag # 44627(warper) 44628(creel) 1 Sucker Müller Sizing Machine with: (1) 12 Position Beam Creel Year 1994 (1) Wet on Wet Size Box / 2000 mm Model SC50 Serial number SC Year 1999 With Siemens electronic controls Year 1999 Siemens electronics by BKW Model SK.07E1VY Year 1999 (8) Dry Cans Teflon & Stainless Steel with Temperature Controls Dry Cans / 2000 mm Model ZS/4/4 Year 1994 (1) Head Stock, Type WN12, 168" Delivery Roller to Accommodate Max. Beam Barrell Length 160", 125 cm Flange Dia. BKW Electronic Model SK 05E1VY Year 1994 With Pleva Model AS120 (1) Range Drive Year 1999 Total Price above Warping and Sizing Set USD 295, Reference: Cost: 0 Terms: SEE -SIZING MACHINE BENNINGER + WARP KNITTING 1994 model yoc. With warp beams. Sizing Working width 2.20 cm Output is 280 cm. 740 amount roller. Warp knitting work width 1.80 cm. Price: dollar CNF

7 Reference: Cost: 0 Terms: SEE -We have available the following Benninger ( Santa Clara ) Warping and Sizing equipment from the factory floor subject to prior sale: PROPOSAL NO. 14/13 N 03- Benninger ( Santa Clara ) High Speed Direct Warpers Model MZD 98 inches Working width With Press Roller With Automatic Beam loading & UnLoading Year: 1994 Tag # 833xx, 833xx N 03- Benninger ( Santa Clara ) V Creels Santa Clara Electronic Stop motions 800 Running Ends 800 Ends in Reserve Year: (2) 1994, (1) 1995 Tag # 833xx, 833xx Price: F.O.T. USD.165, / total price 3-warper + 3-creel ( loading n 3-containers 40 H.C./box.) N 02 - Benninger ( Santa Clara ) Sizing Machines (Slashers) Model WN.10 Headway 160 inches Wide Delivery Roller (4 Meter) 2 Size Boxes 112 inches ( 285cm) Width 12 Dry Cans 110 inches (280cm) Enclosed 16 Beam Creel Moisture Monitors & Temperature Monitors With Drives & Control Panels Tag #54157 With 1 Size Cooking Kettle Tag #541xx Year: 1994 Price: F.O.T. USD. 450, total price 2 sizing ( loading into n 8/9-containers 40 H.C./box.) Your consideration and prompt response will be most appreciated. Regards,

8 Reference: Cost: 0 Terms: - -BENNINGER-ZELL high productive sizing range, model BEN-SIZETEC ZA20 2KAV/TD CT 4/4/6 BB 1600/4000, YOC Composed of: Benninger beams creel model ZA20 for 20 fractional beams each width 1800mm (flange to flange), max flange diam 1250mm, with air pneumatic braking system. Unwinding tension 150N for beam with flange diam 1250mm, 160N for beam with flange diam 1000mm at the air pressure of 6 bar. -beam-loading-unloading carrier with on-floor rails. N 2 electronic drafting force measuring systems model MW. N 1 water pre-wetting tank, with: feeding group with 1 stainless steel cilinder, 1 rubber-covered cylinder, 1 chromed cylinder, 2 sections tank, max water temperature 90 C, each section capacity 300 lt. Squeezing system at the exit of each section. N 2 BENNINGER size boxes model TD, cylinders width 2100mm, working width 1900mm, each box with 2 pairs of squeezing cylinders and 1 immersion cylinder, adjustable squeezing pression up to dan (kgf), pneumatic device for pressure and lifting of the cylinder, Automatic regulation of squeezing pressure by BEN-SIZETEC system. Automatic size feeding device. HANDYMAT sizing box control system with display. Wet separating field for impregnating box for separation of the warp in two layers, with 1 teflon-covered steam-heated measuring cylinder and 1 teflon-covered steamheated deviating cylinder. N 1 Benninger compact dryer type CT4/4/6, 14 drying cylinders width 2100mm (4+4+6), 10 of them tefloned, diam 800mm. Saturated steam 3,5 bar, max temperature 147 C. 5 electronic temperature regulations; comand by means of 3 phases motor and inverter. Standard hooder with 2 fans. CV oiling and waxing device at the exit. MAHLO humidity control and regulation. Dust suction and filtering system. Dry separating field 6,5 meters length, with 19 chromed leasing positions. N 1 Benninger high productive headstock/beaming model BB, width 4200mm, max working width 4000 mm, suitable for beams up to max flange diam 1100 mm, speed from 0,4 to 125 m/min, chain tension 1500 dan, inverter control, extensible reed. Computerized microprocessor automatic control system, PC and modem. Siemens Simatic PC FI15 software with monitor. Size kitchen model SIZEMEIX 1200, capacity 1400 lt, working capacity 1200 lt, with automatic temperature regulation system, water counter. N 2 storage tanks model V1300, working capacity 1300 lt each 1000 lt capacity each, temperature regulation.

9 Reference: Cost: 0 Terms: - -1 BENNINGER ZELL sizing machine Mod. BEN - SIZETEC working width 2200 mm Year 1994 N A13715 Mod. BB-S/ZT4/4/TKD 1 Sectional beam unrolling device Mod. SWA with load cell tension control Electro pneumatic breaking system Maximum beam diameter 1000 mm. 1 Fractional beaming unrolling device with capacity up to 20 positions Electro pneumatic breaking system 1 Sizing box Mod. TDK working width 2200 mm. total width 2400 mm Stainless still box with total capacity of 240 liters with direct steam injection Lower vessels with indirect heat system Automatic size box feeding Handymat for start and stop and machine regulation 1 Drying section device Mod. ZT8 working width 2200 mm 6 drying stainless steel cylinders covered with Teflon + 2 cylinders without Teflon 4 electronic temperature regulations 2 air extraction 1 oil/grease application device Mod. CV 1 Yarn splitting device 7 rods for sectional beams 19 rods for fractional beams 1 Humidity MAHLO control device Mod. RMS-7S n 1670/1/ Beam rolling device Mod. BB for beams up to 1000 mm diameter yarn traction made up of 3 rolls 1 pressurized roller device tension and pressure measure devices automatic beam lift device inclusive of adaptors for different beams extension reed for ends width control mirror for easy yarn control 1 handymat for start and stop and machine regulation 1 dust suction device 1 Complete size kitchen preparation including 2 tanks for size storage 1 Fully automatic BENSIZETEC process control device including hardware and software 1 External electric cabinet Reference: Cost: 0 Terms: BENNINGER SIZING MACHINE High productive sizing range, model PROCOMAT ZELL, Composed of:benninger zell beams creel model for 20 fractional beams each width 1800 mm (flange to flange), max flange diam.1000 mm, 2 Benninger Zell size box model, cylinders width 2000 mm, working width 1800 mm each box with 2 pairs of squeezing cylinders and 2 immersion cylinder. 1 Benninger Zell compact dryer type 12 drying cylinders width 2000 mm 4+4+4, 10 of them tefloned, diam 800 mm. 1 Benninger Zell high productive headstock/beaming model Width 400 mm, max working width 3900 mm Suitable for beams up to max flange diam 1100 mm Speed from 0,4 to 125 m/min, Computerized microprocessor automatic control system. Year 1990 Machine was revised in 2001 VOLTAGE : 380/400 Volts with 3 Phase and 50/60 Hertz

10 Reference: Cost: 0 Terms: Nos BENNINGER ZELL SIZING MACHINE 1 Nos BENNINGER ZELL SIZING MACHINE Year :2000, Width:2400 mm High productive sizing range, model BEN-SIZETEC Composed of: Benninger beams creel model ZA20 for 12 fractional beams each width 1800 mm (flange to flange), max flange diam 1250 mm, with air pneumatic barking system. 1BENNİNGER washing wet box 1 BENNINGER size box model TD, cylinders width 2400 mm, working width 2000 mm, each box with 2 pairs of squeezing cylinders and 2 immersion cylinder. Automatic size feding device HANDYMAT sizing box control system with display. 1 Benninger compact dryer type CT6/6, 12 Drying cylinders width 2400 mm (4+4+4), 10 of them tefloned,2 of them stainless steel, diam 800 mm. MAHLO humidity control and regulation. 1 Benninger high productive headstock/beaming model, width 2600 mm, max working width 2400 mm, suitable for beams up t oma flange diam 1100 mm, speed from 0,4 to 125 m/min. Size kitchen model SIZEMEIX, capacity 1000 lt, working capacity 1000 lt, with automatictemperature regulation system, water counter N2 storage tanks model, working 1000 lt capacity each, temperature regulation. With all spare parts belongs to machine in the floor LOCATI: ITALY MACHINE CAN BE SALE WITH WARPER MACHINE. Reference: Cost: 0 Terms: SEE -Sizing Machine Benninger 1994 model yoc. With warp beams. Working width amount roller. Price: euro ex.work Reference: Cost: 0 Terms: SEE -1 BENNINGER "Ben-Sizetec" sizing machine year 1997, headstock BBE working width 3500mm for beamdiscs diam. max. 1250mm, 2 creels ZA16 each for 16 warpbeams 1800 x diam.1000mm, 2 size-boxes TKE, 12 drying cylinders CT 4/4/4, with size-cooking device Ben-Sizemix, 32x400 V / 50 Hz. Price: Euro /-- CFR major seaport Changsing

11 Reference: 9581 Cost: 0 Terms: SEE -1Set Changsing Sizing Machine - Brand: Changsing korea - Model: cst-tw - Year: nov, Working width:110" - Sizing box : 2sizing box - Dryer : 12pcs - 9pcs cover Teflon beam stand: 12pcs x 2 = 24pcs dryer width: 2000mm dryer size:800mm beam size:1000mm - 2sets direct warping machine Brand: Chang sing - korea Year:2003 working width: 1900mm creel no :640sp cooker tank : 2pcs Condition: running Location: Vietnam Price: US$150, CNF ASIA including C5%. Enova Reference: Cost: 0 Terms: SEE cnf all machines including steam boiler 1- gluer, Enova brand. Triple bath 7 drums with width Out to beam up 4000 mm. wide, Walloon threads 1-Direct warping ENOVA brand. 200cm width - year a creel, and 740 air acartamiento 32 cm 1-Direct warping ENOVA brand. 200cm width - year Normal creel positions, acartamiento 32 cm 1 - gas boiler. SERCOMETAL of 2000Kg.Kl. Reference: Cost: 0 Terms: - -ENOVA Sizing + Warping installation ENOVA Sizing + Warping installation composed by : 2 ENOVA direct warping machines, yoc 2000, 2200 w.w, serial numbers : 360/361.1 Creel, 700 positions,warp stop motion ELTEX, ELECTROJET. 1 Creel, 700 positions, infrared warp stop motion PROTECNA, ELECTROJET. 36 primary beams. Installation with a guide to transport the beams to the sizing creel. 1 SIZING machine ENOVA, 1990, totally modified electronically by ROMOVI in 2000, 3600 mm delivery head with 1000 mm for beams flange, Sizing tank with 3 padders and drying section with 4 cylinders and 3 teflonated cylinders. Includes kitchen + Creel for primary beams with 12 positions. Accesories : 3 Bobbin winders,boiler for 2000Kg/h,3 cranes for beams. Installation suitable to work with pes/cotton, pes. Price: Contact us

12 Reference: Cost: 0 Terms: ,SIZING Enova brand. Triple bath 7 drums with width Out to beam up 4000 mm. wide, Walloon threads 1-Direct warping ENOVA brand. 200cm width - year a creel, and 740 air acartamiento 32 cm 1-Direct warping ENOVA brand. 200cm width - year Normal creel positions, acartamiento 32 cm 1 - gas boiler. SERCOMETAL of 2000Kg.Kl. Ilshin Reference: 6967 Cost: 0 Terms: - Ira Griffin ILSHIN Sizing Machine size box /110" for cotton towel weaving Reference: Cost: 0 Terms: SEE - 1 Ira Griffin Slasher 2 Beam Creels each with 24 Beam Capacity 3 Size Boxes 6 Dry Cans per Box 6 Final Dry Cans 24 Total Dry Cans / 83 Ira Griffin Headway 160 Year: 1998 Tag #44663 Price: F.O.T. USD 245, Kanamaru

13 Reference: Cost: 0 Terms: SEE -KANAMARU / SIZING MACHINE 1 SET *Still Running with Excellent Condition MODEL: KHS-209C YEAR: 1989(1990) WINDING WIDTH & DIA: 2,400 MM, 1,000 MM TENSI CTROL: BY PIV 2 SETS SIZE BOX: 2 BOX SQUEEZING ROLLER WIDTH: 1,850 MM CYLINDER DRYER: 9 PCS, 1,850 MM WIDTH HOT AIR DRYING CHAMBER: 1 CHAMBER BEAM STAND: 24 PCS WITH BRAKING DEVICE MOISTURE CTROLLER ATTACHED HIGH PRESSUOR COOKER 1,000 L 1 SET MIXING KETTKE 2,000 L 1 SET KANAMARU / DIRECT WARPER 2 SETS *Still Running with Good Condition MODEL: C TYPE YEAR: 1983 WIDTH: 58 INCH (1,480 MM) CREEL: V TYPE, 600 PCS WITH STOP MOTI CREEL PEG PITCH: 220 x 220 MM ATTACHED WARPER S BEAM: 1,450 MM WIDTH, 680 MM DIA TOTAL 30 PCS THE ABOVE TOTAL PRICE: USD 182, C&F/ 5 vans Karl Mayer Reference: Cost: 0 Terms: - -1 x KARL MAYER SIZING MACHINE, Rotal, 1996/98 roller and cyl. width 2000 mm, working width 1800 mm max. working width at headstock 2100 mm, max. speed Reference: Cost: 0 Terms: Karl Mayer Sizing Rotal year 2002, erected in March 2003 feeding 20 position for beams 2000 mm 2 sizing box with 2 rollers drying for each sizing box 12 drying rollers totally exit beam max 2600 mm color kitchen with 2 tank 01 Fractional warping Karl Mayer year 2002, erected in March position gauge 320 mm complete with 3 series of 14 trolleys ( total: 42 trolleys) exit bean 2000 mm 40 beams included Location: Europe Price and photos: on request

14 Reference: Cost: 0 Terms: SEE -1 KARL MAYER SIZING MACHINE, type Rotal, year 1996/98 roller and cyl. width 2000 mm, working width 1800 mm max. working width at headstock 2100 mm, max. speed 120 m/min., consisting of: Beam creel, type RN /1000 for 12 beams 1800 mm between the flanges, max mm flange diam., pneum. Brakes, individually controlled Size trough, type 1800 double sizing box 2 diving roller, 2 x 2 squeezing rollers,, automatic temperature regulation automatic dosing of of sizing material waxing device Cylinder dyer, 11 drying cylinder modernized in 1996 Warp tension regulation device, type ULN-1800 partitioning field Beaming Machine / Headstock, type ID 2700/1000 Cylinder width 2700 mm, max. working width: 2100 mm Max. Flange diam mm Dinax 1 computer system: Unwinding tension on the stand on warping rollers, regulation of warp and traction tension, regulation of temperature, funds of delay in tensive zones, regulation of squeezing pressure, residual moisture, machine speed, metering of wrapped quantity possibility of placing of 60 setting dates in the memory.. SPECIAL PRICE CFR Major Seaport ,- (offer valid until Sept. 30, 2013)

15 Reference: Cost: 0 Terms: - -1 KARL MAYER SIZING MACHINE, type Rotal, year 1996/98 roller and cyl. width 2000 mm, working width 1800 mm max. working width at headstock 2100 mm, max. speed 120 m/min., consisting of: Beam creel, type RN /1000 for 12 beams 1800 mm between the flanges, max mm flange diam., pneum. Brakes, individually controlled Size trough, type x 2 squeezing rollers, 2 diving roller, automatic temperature regulation automatic dosing of of sizing material waxing device Cylinder dyer, 11 drying cylinder modernized in 1996 Warp tension regulation device, type ULN-1800 partitioning field Beaming Machine / Headstock, type ID 2700/1000 Cylinder width 2700 mm, max. working width: 2100 mm Max. Flange diam mm Dinax 1 computer system: Unwinding tension on the stand on warping rollers, regulation of warp and traction tension, regulation of temperature, funds of delay in tensive zones, regulation of squeezing pressure, residual moisture, machine speed, metering of wrapped quantity possibility of placing of 60 setting dates in the memory.. Pictures and prices upon request. Location Schengen Europe. Reference: Cost: 0 Terms: - -IRA GRIFFIN (KARL MAYER) SIZING MACHINE Production year 2000 Producer IRA GRIFFIN (USA)under licence karl mayer Warp beam 16 psc Beam creel air brake tention automatically controled Head width max 2700 mm Double sizing box and double squeesing 20 dryer cylider dryer All cylinder are covered by teflon All controle automatic electronic system Warp accumulator Beams width 1650 mm Beam dia 1000 mm Master

16 Reference: Cost: 0 Terms: - -MASTER SLASHER DYEING RANGE1.800MM YEAR 2008 GENIUS (PAT) (INDIGO AND SULPHUR) WITH SIZING, DRYING AND WARPING E CREEL FOR FRACTIAL BEAMS MAX. 12 BEAMS, DIAMETER 1250 MM WIDTH 1500 MM FIRST SECTI FOR SODA TREATMENT OR PRE-DYEING OR RINSING, WITH PADDER 10 TS, 1800MM WW 1 DYEING BATH RECIRCULATING GROUP X TANK N 1 OR TANKS N1 + N2 E SODA REACTI OR OXIDATI SECTI WITH 7 CYLINDERS DRYER, DIAMETER 800 MM, WIDTH 2000MM 1 DYEING / WASHING COMPARTMENTS, WITH 1 PADDER 10 TS, WIDTH 1800MM 1 INTENSIVE WASHING CHAMBER "ECO WASH", WITH 1 PADDER 10 TS, WIDTH 1800 MM 1 WASHING/DYEING ELEMENT INERT DYE GENIUS (PAT) COMPLETE WITH 1 PADDER 10 TS, WIDTH 1800 MM + RECIRCULATING DYEING E HEATING/DEHYDRATATI SECTI COMPLETE WITH PADDER 10 TS W 1800 AND RECYCLING DYEBATH. E DRYING SECTI 6 CYLINDER DIA 800 W 1800 E WASHING/DYEING ELEMENT INERT DYE GENIUS (PAT) COMPLETE WITH 1 PADDER 10 TS, WIDTH 1800 MM + RECIRCULATING DYEING BATH E HEATING/DEHYDRATATI SECTI INERT AIR FOR YARN DYED COMPLETE WITH PADDER 10 TS W 1800 AND RECYCLING DYEBATH. 2 SECTIS OF DE-HUMIDIFICATI/ NITROGEN CIRCULATI, CLOSED LOOP 2 NITROGEN SYSTEMS 2 GROUPS OF OXIDATI + RAPIDSKY (PAT FORCED OXIDATI) YEAR PREDRYING SECTI WITH 2 CYLINDER 800 MM DIA WIDTH INTENSIVE WASHING CHAMBERS "ECO WASH", WITH 1 PADDER 10 TS, WIDTH 1800 MM E INTENSIVE WASHING CHAMBERS "ECO WASH", WITH 1 PADDER 10 TS, WIDTH 1800 MM E PNEUMATIC ACCUMULATOR, MAXIMUM 130 M CAPACITY. SIZING/BEAMING 1 RAMALLUMIN PRE-DRYER, EIGHT STEAM CYLINDERS, DIAMETER 800MM, WIDTH 2000 MM,1 ROTAL SIZE BOX, 3 TS PRESSURE, WITH 2 DIP AND 2 SQUEEZE ROLLERS YEAR 1990 E RAMALLUMIN DRYER, YEAR 2001, WITH 13 CYLINDERS, DIAMETER 800 MM, WIDTH 2000 MM E SEPARATING UNIT E ROTAL DIRECT BEAM WARPPING, FLANGE DIAMETER 1250 MM, WORKING WIDTH 3000 MM DYE/SIZE KITCHEN: E SIZE KITCHEN: CSISTING OF 1 PREPARATI TANK, 1 SIZE COOKER, 1 STORAGE TANK E DYE KITCHEN: CSISTING OF: 1 PREPARATI TANK, 2 DYE STUFF TANKS, 2 FEEDING TANKS, 2 DOSING PUMPS ADDITIAL RAMALLUMIN WARPING: E RAMALLUMIN DIRECT FRACTIAL WARPER, YEAR 1996 WORKING WIDTH 1500 MM, FLANGE DIAMETER 1250 MM WITH ROSTI CREEL, 672 ENDS, GAUGE 340 MM WITH 24 BEAMS IN TOTAL WIDTH 1500 DIAM 1250 Multiple Reference: Cost: 0 Terms: - Filament Sizing Machine Complete.(Kawamoto) Warper; 1set Tsudakoma TW-N(YOM:1998) 1627mm Creel:1080sp Sizing; 1set Kawamoto FILAMASTER EXPRESS610(YOM:1993) DC motor type, Beam to Beam type, 5cylinder. Beaming; 1set Kawamoto KSD-B/M(YOM:1980) 13stand 2500mm Belt Brakes type

17 Reference: Cost: 0 Terms: - -For Weaving Preparatory x Hacoba Warping Machine year 1994, 700 creel, Direct Warper 1 x Sucker Muller sizing machine year 1994, 130, single size box 1 x ILSIN Sizing Machine, year 1994, 130, single size box

18 Reference: Cost: 0 Terms: SEE LOCATI THAILAND 1. USED BABA SIZING MACHINE WIDTH : 80" YEAR : 1990 VS-MOTOR TYPE CYLINDER : 9 PCS SIZE BOX : 1 SIZE BOX BEAM STANSD : 12 PCS WARPER 1 SETS 52 INCH BEAM : 15 PCS CREEL : 570 SPINDLES PRICE CIF 64,000 USD. **** 2. USED KAWAMOTO SIZING MACHINE WIDTH : 95" YEAR : 1992 VS-MOTOR TYPE CYLINDER : 9 PCS SIZE BOX : 1 SIZE BOX BEAM STANSD : 12 PCS WARPER 1 SETS 52INCH BEAM : 15 PCS CREEL : 570 SPINDLES COOKING TANK : 2 PCS PRICE CIF 64,000 USD. ****** 3. USED KAWAMOTO SIZING MACHINE WIDTH : 120" YEAR : 1990 VS-MOTOR TYPE CYLINDER : 12 PCS SIZE BOX : 2 SIZE BOX BEAM STANSD : 14 PCS WARPER 1 SET 64 INCH BEAM : 15 PCS CREEL : 600 SPINDLES PRICE CIF 94,000USD **** 4. USED KANAMARU SIZING MACHINE WIDTH : 110" YEAR : 1992 VS-MOTOR TYPE CYLINDER : 9 PCS SIZE BOX : 1 SIZE BOX BEAM STANSD : 12 PCS WARPER 1 SETS 52INCH BEAM : 15 PCS CREEL : 600 SPINDLES COOKING TANK : 2 PCS PRICE CIF 74,000 USD **** 5. USED KANAMARU SIZING MACHINE WIDTH : 130" YEAR : 1990 VS-MOTOR TYPE CYLINDER : 9 PCS SIZE BOX : 1 SIZE BOX BEAM STANSD : 12 PCS WARPER 1 SETS 52INCH BEAM : 15 PCS CREEL : 600 SPINDLES COOKING TANK : 2 PCS PRICE CIF 99,000 USD **** 6. USED SHINKO SIZING MACHINE WIDTH : 150" YEAR : 1994 VS-MOTOR TYPE CYLINDER : 9 PCS SIZE BOX : 1 SIZE BOX BEAM STANSD : 12 PCS WARPER 1 SETS 70INCH BEAM : 15 PCS CREEL : 600 SPINDLES COOKING TANK : 2 PCS PRICE CIF 99,000 USD

19 No Name Reference: Cost: 0 Terms: Model Slasher Indigo Dyeing Machine Ramallumin Reference: Cost: 0 Terms: SEE Schlafhorst -RAMALLUMIN SIZING MACHINE BRAND: RAMALLUMIN ENTRY: 2100mm EXIT: 3600mm MACHINE FROM 2006 EXCEPT THE DRYING CYLINDER BLOCK WHICH IS FROM 1987 WITH 9 CYLINDERS (5 X TEFL AND 4 STAINLESS STEEL) EXIT IN 3600mm IN 1000mm MAX HIGH PRESSURE YARN ACCUMULATOR ZIGZAG REED 42 X PRIMARY BEAM 2100mm, DIAM X PRIMARY BEAM 2100mm, DIAM CREELS OF 12 POSTI EACH FOR BEAMS 700mm 1 CREEL OF 12 POSITIS FOR BEAMS 1000mm QUANTITY: 1 Price: Euro loaded Note: 3% commission for me Reference: 7815 Cost: 62,000 Terms: EACH, EURO, CNF Sucker Muller ROTAL SIZING MACHINE width 4200, + Schlaforst fractional warper, yoc 1980 Please consider: If prices or commissions are mentioned, they do not include commission for us or any agents. We kept the message original!!!

20 Reference: 7545 Cost: 0 Terms: - Sucker Muller Sizing/Hacoba Direct Warper/ILshin sizing m/c subject to prior sale. Pls check and contact us asap. - Photo : upon request - Price : upon request - Location : Korea 1. Sucker Muller Sizing Machine - Year : Head ( Type : WN) - Width : 130" ( 3,300 mm) - Beam Stand creel : 12 ( Type : ANP-12) - Warping width : 1,800 mm - Max beam flange diameter : 1,000 mm - 1 Size box ( Type : SD-40 ) - Number of squeezing roller : 2 x 2 - Number of immersion roller : 2 - Max squeezing press of main sqeezing machine : 40KN - Automatic squeeze pressure control from 0-15 KN - Max. machine speed : 125 m/min - Let-off Reglator AB300 - Let-off measuring tention range : N - Roller width : 2,000 mm - Dry Cylinder : 12 pcs ( Type : ZG8,TZ) - with after waxing device & moisture control device - with Control Panel 2. Hacoba Direct Warping Machine - Year : Type : Head (NZB- Super 1000 ) / Creel ( G5-N-T) - Number of ends 700 arranged in 5 creel sections. - Vertical pitch : 270 mm - Horizontal pitch : 270 mm - Number of decks : 7 - Beam Diameter : 1,000 mm - Warping Width : 1,800 - Direct Beam drive by D.C. motor 22 KW - Speed : 0 to 1,500 mts/min - Expanding comb : 700 dents - Lateral traverse motion - Automatic indication of yarn brakes - With Yarn cutting device & Independent Blowing Device 3.ILShin Cotton Sizing Machine - Year : Q nty : 1 set - Width : Beam creel - Single Size Box - Dry Cylinder : 11 EA * Above 3 set machineries is same 1 factory in Korea. * with spare warper beam : 18 pcs * with mixing and cooking tank : each 1 pcs ( 1000 & 1200 liter) * Delivery : Immediately * Location : Taegu Korea Please consider: If prices or commissions are mentioned, they do not include commission for us or any agents. We kept the message original!!! Reference: 7022 Cost: 0 Terms: EACH, EURO, FOT, 1 SUCKER MULLER Sizing machine Mod. SD-40 year of construction 1988 width 2100 mm in entry width 3200 mm in exit 1 Size box 10 drying cylinders (4 tefloned cylinders and 6 stainless steel cylinders) Size kitchen 800 litres with deposit of 1000 litres Creel for fractional warp-beams 12 warp-beams Price : Euro ,00 desmantled and loaded, net for us Delivery time : Immediate, for loading within and not later end of May 2012

21 Reference: 7571 Cost: 0 Terms: SEE 1 SUCKER MULLER Sizing machine, working-width 2400 mm yoc 1980, equipped with : 11 steam cylinders at 3 bar 2 valves for temperature regulation 6 tefloned cylinders 1 size box with double pair of squeezing cylinders + 2 immersion rollers 2 motors for suction 2 supports for sectional warp-beams 1 cooking boiler 1 rubber squeezing cylinder of spare 2 tanks of spare The plant as it is now, can be used for sizing of sectional warp-beams, but it can be extended to sizing also fractional warp-beams by adding a creel. Price : Euro ,00 desmantled and loaded, net for us. Delivery time : Immediate, for loading within and not later end of May 2012 Reference: 7865 Cost: 0 Terms: - 01 SIZING MACHINES Suckker Müller, Typ WR-CE, yoc. 1988, 11 drums - 6 x teflon, drum width 240 cm, ww. warping 370 cm warp beam stand 8+8 accessories sizing kittchen with 2 bowls VA with with agitator and pump Please consider: If prices or commissions are mentioned, they do not include commission for us or any agents. We kept the message original!!! Reference: 7976 Cost: 0 Terms: - 1 SUCKER MULLER sizing machine, year 1986, modell WN 10, max. width 3200 mm, double size box, 16 cylinders (12 diam mm and 4 diam. 500 mm), creel for 20 beams, 1 complete sizing kitchen, with 1 SCHLAFHORST direct warper, working width 1800 mm, max. beam diam mm, 1 Schlafhorst creel with 432 positions. Please consider: If prices or commissions are mentioned, they do not include commission for us or any agents. We kept the message original!!! Reference: 8576 Cost: 0 Terms: - SUKER MULLER SIZING MACHINE - YOC 1988 WHITE COLOUR TEFL CYLINDERS INLET 190 cm EXIT 320 cm FLANGE DIAM INLET TRAVELLING DOUBLE CARRIAGE + CARRIAGE FOR SECTIAL + SUPERTRIC WITH DOUBLE CREEL WITH 640 POSITIS STATUS: STILL ERECTED Reference: 9476 Cost: 0 Terms: SEE -1 Nos. Sizing machine SUCKER-MULLER WR Old Price: EUR CFR New price: EUR CFR Year sizing boxes of 2000 mm each creel 16 beams, head stock max cylinders: 9 Teflon + 3 Steel

22 Reference: 9546 Cost: 0 Terms: SEE -Sizing machine SUCKER type WN-12 year of construction 1987, serial number , creel AWB-12 year of construction 1994 for 12 warp beams 1600mm, single size box LC3, 7 drying cylinders, MAHLO, Laserstop, head stock WN-12, working width 2800mm, Ø warp beams 1200mm, with preparation tank. Price CFR Major seaports : Euro Reference: 9547 Cost: 0 Terms: SEE -Sizing machine SUCKER type WS-12 year of construction 1995, serial number , creel ABN-12 for 12 warp beams 1600mm, single size box SD, 12 drying cylinders ZS, head stock WS-12, working width 2800mm, Ø warp beams 1200mm, with preparation tank. Price CFR Major seaports :

23 Reference: 9556 Cost: 115,000 Terms: EACH, USD, CNF -Sucker Muller Sizing M/C With Benninger Warper. Working Width : 3,200mm. Double Size Box with Double Dip & Squeezing. 720 ends V- Creel, With all Size Cooking Device.. Yom All Parts are complete, If you are interested, please send me one , then I can give more photos and price. : Sucker Sizing & Benninger Warping Complete Line. Sucker Muller Sizing (S-432) Type : S-432 Yoc: 1992 Working Width: 3200mm Flange Dia: 1000mm Dia Control: PIV Gear Box RS34 Winding Force: 0 ~ 8000N Press Force: 0 ~ 8000N No. of Dry Cylinders: 12 No. of Size Boxes: 2 ( Double), Double Dipping & Squeezing. Creel : for 16 Warp Beams. Including: 32 Warp Beams Cooking Cattle: 1 (650 Ltr) Cooking Storage: 1 (1000Ltr) Electric Control: Complete Panel Benninger Direct Warper ZC-R TYPE: ZC-R YOC: 1992 Made By: Switzerland Working Width: 1800 mm Creel Type: V Creel (Ge-GCF) Electric Control Panel. Flange Dia: 1000mm Creel Capacity: 720 ends Reference: 9909 Cost: 0 Terms: - -Sizing Machine Sizing Machine sucker Moenus Z 14, 340 cms width, 1000mm flange dia, drying cylinders, 2 sow boxes, 2 dip and 2 nip, 24 warper beams creel Size mixing cooker, 1200liters Size storage vessel, 1200liters Reference: Cost: 0 Terms: - Revized -SIZING MACHINE SUCKER-MULLER WR Year sizing boxes of 2000 mm each creel 16 beams, head stock max cylinders: 9 Teflon + 3 Steel 1 nr Price: 35,000 EUR CF

24 Reference: Cost: 0 Terms: - -1 x Sucker slasher type sizing machine, creel for 10 beams, single sizing through SE 15, infrared pre drying unit, dryer with 5 teflon coated drums, headstock WE 10, working width 2800mm, installed 1999 STATUS: CDITI: LOCATI: stopped but fully installed very well maintained Johannesburg, South Africa Reference: Cost: 0 Terms: - -NO. 1 SUCKER MULLER SIZING MACHINE Year 1980 Enter working width mm Exit working width mm With One Size box with rubber rollers squeezers 10 drying cylinders (6 Normal + 4 on teflon) With Kitchen of liters with Storage tank of 600 litres. With Malho dehumidifier Creel for 16 beams 380V 50hz Reference: Cost: 0 Terms: SEE - 1 Sucker Müller Sizing Machine with: (1) 12 Position Beam Creel Year 1994 (1) Wet on Wet Size Box / 2000 mm Model SC50 Serial number SC Year 1999 With Siemens electronic controls Year 1999 Siemens electronics by BKW Model SK.07E1VY Year 1999 (8) Dry Cans Teflon & Stainless Steel with Temperature Controls Dry Cans / 2000 mm Model ZS/4/4 Year 1994 (1) Head Stock, Type WN12, 168" Delivery Roller to Accommodate Max. Beam Barrell Length 160", 125 cm Flange Dia. BKW Electronic Model SK 05E1VY Year 1994 With Pleva Model AS120 (1) Range Drive Year 1999 Price: F.O.T. USD 195, Reference: Cost: 0 Terms: - -1 x SUCKER MUELLER SIZING MACHINE (WETSIZEtechnology), year 2002 roller width 2000 mm, working width 1800 mm / headstock

25 Reference: Cost: 0 Terms: Sucker Müller Sizing Machine with: (1) 12 Position Beam Creel Year 1994 (1) Wet on Wet Size Box / 2000 mm Model SC50 Serial number SC Year 1999 With Siemens electronic controls Year 1999 Siemens electronics by BKW Model SK.07E1VY Year 1999 (8) Dry Cans Teflon & Stainless Steel with Temperature Controls Dry Cans / 2000 mm Model ZS/4/4 Year 1994 (1) Head Stock, Type WN12, 168" Delivery Roller to Accommodate Max. Beam Barrell Length 160", 125 cm Flange Dia. BKW Electronic Model SK 05E1VY Year 1994 With Pleva Model AS120 (1) Range Drive Year 1999 Price: F.O.T. Reference: Cost: 0 Terms: SEE -Machine SUCKER COMSIZE SIZING MACHINE YEAR 2003 SUCKER (MOENUS) COMSIZE SIZING MACHINE YEAR 2003 Headstock Type WE-10-PC Max. width : 3200mm Width of warp beams : 1800 mm Type ANP 16 beam creel WETSIZE, type SC 50 double dip size box. DELTA dryer, type ZM 10 cyls (5+5), Ø 800 mm Size preparation kitchen type RK 1000, storage type VB 1500 PLEVA type AS 120, MAHLO-TEXTOMETER EMC 9 REFRAKTOMETR Length (mm): 5150 Width (mm): 2400 Height (mm): 4000 SUCKER (MOENUS) DIRECT WARPING MACHINE YEAR 2003 Type NZB-COMWARP 1000, beaming width 1800mm,diam 1000mm 624 position creel, vertical pitch 337, 5mm.Horizontal pitch 337,5mm 2 SOHLER Suction units Type DBW-A Price for all 265,000 Euros C&F Main Asian Ports Reference: 7814 Cost: 0 Terms: - 1 SUCKER-MÜLLER SIZING tip.wl Nr , yoc Ramallumin fractional warper Matr.573, yoc 1990 H.fractions 165 mm.(36 fractions) Please consider: If prices or commissions are mentioned, they do not include commission for us or any agents. We kept the message original!!!

26 Reference: Cost: 0 Terms: - -Sucker & Müller sizing line. Sucker Müller sizing line Model: ZS 12 Beam width entry: 180 cms Flange dia 800 mm Yoc : 1988 Condition: Excellent Composed of: Entry creel for 20 Beams, pneumatic break system 1 additional unwinding station for 1 Beam 1 Size box, double nip double squeeze 2 Intermediate dryeinng drums WUMAG teflonized Steam heated, 3,5 bar 165 deg Cel. 2nd size Box double nip and double squeeze Drum dryer with 4 teflonized WUMAG drums and 2 Stainless steel drums Headstock; 290 cms Flange 800 mm Also included: 01 Direct warper Ramuliman width: 180 cms Flange dia. 800 mm Creel with 472 ends 01 Lifiting crane, 1998/ 2 tons Machine is in Excellent conditions on Mill floor Delivery: ready Price: upon request Location: Italy Reference: Cost: 0 Terms: SEE -N 01-SUCKER MULLER sizing machine, YOC N 2 sizing boxes model AR-300, width 2200mm. N 2x2 squeezing cylinders, N 2 side squeezers, squeezing max 100kN. AP unwinding system for sectional beams. Completed with aspiration hood, automatic adjustment of sizing temperature, size recycling pump in the box and return of the size into the reserve tank. Sizing kitchen total capacity 800 lts, reserve size tank capacity 1000 lts. 12 SD-40 drying cylinders, of them 8 tefloned. Insulation system and heat-recovering plant. N 02 motorized mobil creels model BSPF-12 for 12 beams flange 1000mm each, beams width mm, side fixing system, pneumatic braking system. Sizing head model WR-C, width 3200mm max, nominal speed 125 mt/min max. ETV Hygromatic computer system for electronic humidity control. Winding tension N, separation field length 8 mts, 12 separation rods. Demag crane, capacity 1000kg with double rail. Delivery : ready Location : Italy Total selling price : Euro ,00 mill-floor, Euro ,00-FOT, Euro ,00-C&F d.s.p.

27 Reference: Cost: 0 Terms: SEE -Zucker Muller Sizing+Warper 1997 yoc. 180 input and 320 cm output working width. Sizing+warper machine. 20 cyclinders. Remark:Pictures and other details upon request. Price: euro EXWORK. Reference: Cost: 0 Terms: SEE -Sucker Muller sizing and Benninger direct warper 01 - SUCKER MULLER, sizing machine, delivery 260cm for 80cm dia., 2 drying towers of 4 drums each, 1 double box for 600 Ltrs., creel for 12 warp beams, Malho contrlol - Stop in mill BENNINGER, direct warper, of 180cm wide x 100cm dia., "V" creel, 670 positions, 27cm gauge, 18 warp beams reinforzed availble - Stop in mill - Note: Line in the same mill, all stop in perfect conditions Delivery: Immediate Location: South America Pics: US$ C&F NET Reference: Cost: 0 Terms: - -Sucker muller hocabo Model tank and 2 dipping 20 unit beams loading creel Electronic tension control Reference: Cost: 0 Terms: - -SUCKER-MÜLLER SIZING tipe WL Nr , yoc Ramallumin fractional warper Matr.573, yoc 1990 H.fractions 165 mm.(36 fractions)

28 Reference: Cost: 0 Terms: SUCKER MULLER, sizing machine, delivery 260cm for 80cm dia., 2 drying towers of 4 drums each, 1 double box for 600 Ltrs., creel for 12 warp beams, Malho contrlol - Stop in mill BENNINGER, direct warper, of 180cm wide x 100cm dia., "V" creel, 670 positions, 27cm gauge, 18 warp beams reinforzed availble - Stop in mill - Note: Line in the same mill, all stop in perfect conditions Delivery: Immediate Location: South America Pics: Avaliable Reference: Cost: 0 Terms: - -1 x Sucker Muller Sizing Machine Width : 3600mm YOC : 1991 Delivery Time : immediate Size Box: Double Box, Size Box Type: SE- Type, Creel Capacity: 24, No. of Drying Cylinders: 12, Cooking Kettle Capacity: 650 L, Storage Kettle Capacity: 1000L, excellent working condition still running on mill floor. Reference: Cost: 0 Terms: SIZING MACHINE SUCKER MUELLER YEAR OF CSTRUCTI 1981/84 COMPOSED BY : 1 SIZING BOX DOUBLE DEEP AND DOUBLE SQUEEZE 1 PRE DRYER BY 4 TEFLIZED CYLINDERS 1 SIZING BOX DOUBLE DEEP AND DOUBLE SQUEEZE 1 FINAL DRYING SECTI COMPOSED BY 3 STEEL CYLINDERS + 4 TEFL CYLINDERS 1 HEAD STOCK OF MAX 3000 MM WIDTH, CYLINDER WIDTH 1800 MM, USEFUL WIDTH 1600 MM COMPLETE WITH SIZE KITCHEN WITH TANKS DELIVERY: LOCATI: STATUS: IMMEDIATE HUNGARY STOP MILL FLOOR Reference: 7060 Cost: 0 Terms: - 1 Sizing machine SUCKER-MÜLLER 1992, composing: - creel for 24 beams Ø 800mm, width 1800mm, pneumatic break/ tensioning. - pre-drying section for yarns from dyeing beams, 4 steel drums incl, single beam unwinding device with tensioner. - 2 size boxes type SE-R 40, full automatic temp./ level control drying drums, teflonized, incl. tensioning device. - Beaming machine type WR-ML, beam width max. 2600mm, diam 1000mm. - Moisture control MAHLO Textometer RMS-7. - Control panel. Please consider: If prices or commissions are mentioned, they do not include commission for us or any agents. We kept the message original!!!

29 Reference: Cost: 0 Terms: - -1 x Sucker Muller Sizing Machine Width : 3600mm YOC : 1991 Delivery Time : immediate Size Box: Double Box, Size Box Type: SE- Type, Creel Capacity: 24, No. of Drying Cylinders: 12, Cooking Kettle Capacity: 650 L, Storage Kettle Capacity: 1000L, excellent working condition still running on mill floor. Reference: Cost: 0 Terms: - -1 Sucker Muller Moenus Slasher, Model ZS-12, Year 2003, 2850 mm wide x 1250 mm diameter beam, 12 beam creel for 1800 mm x 1000 mm diameter beams, Sizing box 2000 mm wide, 2 squeeze set, Pre-wetting box, 12 drying cylinders 2000 mm wide x 800 mm diameter Reference: Cost: 0 Terms: SUCKER MULLER Sizing Range type SD-40 Year 1989/1990 Creel with 18 beams Working width 1800 mm maximum head width size boxes with 2x2 + 2 diving nip rollers. Max speed: 125 m / min In feed from the sizing troughs 12 drying cylinders, teflon-coated, divided into 3 modules that are fully clothed between heat recovery system AS120 measurement size application - Fa Pleva Size Kitchen.

30 Reference: Cost: 0 Terms: SEE -1 SUCKER MUELLER SIZING MACHINE (WETSIZE-technology), year 2002 roller width 2000 mm, working width 1800 mm / headstock max., comprising out of: 2 Beam Creels ANPf for each 12 beams, 1800 mm width between the flanges and flange diam mm, side movable (motor driven), with pneumatic brakes, 1 Unwinding regulation by LOADCELL measuring roller from kn 1 WETSIZE size box, each with 2 pre-wetting rollers (max. pressure 70 kn), 1 pre-squeezing roller (10 kn) and 2 main squeezing rollers (50 kn) max 40 kn, 2 partitioning rods (motor driven) 1 PLEVA size application control and regulation (Telecoll) (System SICAM), consisting of: software integrated in the PC software 1 complete PLEVA size application control device type AS Cylinder dryer with total 11 drying cylinders, consisting of: Z2/2 version (pre-dryer cylinders) + ZT7 dyrer with 7 drying cylinders max. diameter 800 mm, pressure 5 bar, built from previously existing sizing machine with 3 new electronic temperature controls 1 partitioning field, 11 rods 1 Mahlo Textometer type EMC-9 humidity measuring and control device for autom. regulation of machine speed in relation to humidity of the warp aat the exit of the cylinder dryer 1 Headstock WE-10, 3200 mm cylinder width, max. beam pipe width 3000 mm, warping width min. 840 max mm for flange diam mm, max. beam length 2920 mm machine speed m/min, with crwal speed abt. 5 m/min beaming force N, pressure N 1 machine process control LOGOS COMSIZE, 380 V/50Hz, process control of steering and adjustments via monitor: in-built PC with 10 monitor and integrated hard disk, option for tele-diagnosis for maintenance, monitoring or trouble-shooting 1 Control Panel 400 Volts, 50 cycles Size Kitchen 1 Rotor cooker RK 121, with stainless steel tank ltr. SPECIAL PRICE CFR Major Seaport ,- (offer valid until Sept. 30, 2013) Reference: Cost: 0 Terms: - -1 SUCKER MULLER warp-sizing unit year 1989, beaming machine "WN12" working width 280 cm beamdisc diam. max. 120 cm, dryer 7 cylinders (3 teflonised), waxing device, sizing box SE/SD, warpcreel at entry for max 8 primary warpbeams 800 mm x 1800 mm, Mahlo RMS-7, Turbo-cooking device for size cont. 600 liter, with 1 HACOBA direct warper UZN year 1989, working width 1800 mm, beamdiscs max 800 mm, with warpcreel Hacoba 480 ends - pitch 300 mm, with 19 primary warpbeams 800 x 1800 mm.

31 Reference: Cost: 0 Terms: - -SUCKER-MULLER SIZING MACHINE mod.we-10 yoc 1991, single deep, width mm entry - mm.3200 delivery ( 2 twin beam ) Complete with dryer and kitchen Reference: Cost: 0 Terms: - -1 SUCKER-MULLER SIZING MACHINE mod.wr-c yoc 1988, double deep, width mm entry - mm.3200 delivery ( 2 twin beam ) Complete with dryer and kitchen Reference: Cost: 0 Terms: - -1x Sucker sizing machine, for direct warp and sectional warpbeams. Year 1989 Beaming machine Type WN, Nr Working width 280 cm, beamdisc diam. Max mm Dryer with 5 cylinders, all with Teflon Waxing device Sizing box type SE Mahlo RMS for humidity/ speed control Warpcreel for 8 beams, 240 cm width, 800 mm diameter Sectional warp unit with 240 cm width, beam diam. Max 1000 mm Automatic warp tension control Size cooking device, 600 Ltrs, Type Turbo-cooking 1x Hacoba direct warper Type UZN Year 1989 Working width: 1800 mm, beam diam. 800 mm Warpcreel Hacoba 480 ends Pitch 300 mm With 16 warpbeams 1800 mm, diam. 800 mm Location: Europe

32 Reference: Cost: 0 Terms: SEE -Sizing machine, brand: Sucker+ Müller, Germany Model ZG 6, SD 40, AB 300, TZ 4 w. w mm, y.o.c The machine has 12 pre-rollers and 10 drying rollers, The machine is in working condition, 380 V, 50 Hz Dimension: 21 m x 4.7 m Warping machine, brand: Schlafhorst,Germany, model: MZD w. w mm, y.o.c The machine is in working condition, 380 V, 50 Hz Dimension: 17 m x 3.6 m The machines are in good condition Price EXW Europe: ,00 EUR The nearest airport is in Belgrade, Serbia Reference: Cost: 0 Terms: - -1x Sucker sizing machine, for direct warp and sectional warpbeams. Year 1989 Beaming machine Type WN, Nr Working width 280 cm, beamdisc diam. Max mm Dryer with 5 cylinders, all with Teflon Waxing device Sizing box type SE Mahlo RMS for humidity/ speed control Warpcreel for 8 beams, 240 cm width, 800 mm diameter Sectional warp unit with 240 cm width, beam diam. Max 1000 mm Automatic warp tension control Size cooking device, 600 Ltrs, Type Turbo-cooking 1x Hacoba direct warper Type UZN Year 1989 Working width: 1800 mm, beam diam. 800 mm Warpcreel Hacoba 480 ends Pitch 300 mm With 16 warpbeams 1800 mm, diam. 800 mm Location: Europe Reference: Cost: 0 Terms: SEE -Model:WN-12 year 1994 Series: Sale price: US$ dollars.

33 Reference: Cost: 0 Terms: SEE -sucker Mueller Model: wn10 year 1986 Series: Sale Price: US$ dollars Reference: Cost: 0 Terms: Nos SUCKER MULLER SIZING MACHINE 1 Nos SUCKER MULLER SIZING MACHINE Year 1985 Machine was revised in 2001 Composed of: 12 in working positions for beams flange diam 1000 mm, distance from flange to flange 1800 mm. 2 tanks for sizing Boxes composed of 1-LC3. Drying area is composed of 18 total cylinders (6+6+6), 12 tefloned cylinders, width 3000 mm, 6 iron steel cylinders, width 3000 mm. Working with 2600mm. Beaming head mod WN width 4700 mm Max.working head 3,40 for beams with flange diam 1100 mm, completed with hydraulic pressure cylinders. Mahlo electronic humidity control. Completed with sizing kitchen, and all spare parts belong to machine in the floor.