Technical specification

Transcription

1 Technische Technical specification Daten Kaltfräse Cold milling W 200 machine W 50

2 Technical specification Milling width max. Milling depth * 1 Cold milling machine W mm mm Milling drum Tool spacing 15 mm Number of tools 50 Drum diameter with tools 590 mm Engine Manufacturer Deutz Type TD 2011 L04W Cooling Water Number of cylinders 4 Rated power at 2,500 min kw / 80.3 HP / 81.5 PS Displacement 3,619 cm 3 Fuel consumption at rated power 18.3 l / h Fuel consumption in field mix 8.3 l / h Emission standards EU Stage 3a / US EPA Tier 3 Electrical system 24 V Tank capacities Fuel tank 165 l Hydraulic fluid tank 80 l Water tank 500 l Speed / gradeability Travel speed in 1 st milling gear m / min Travel speed in 2 nd milling gear 0 25 m / min Travel speed in travel gear, max. 0 6 km / h Tyres Type Solid rubber Tyre size front and rear, 3-wheeled model (dia. x W) 559 x 254 mm Tyre size front, 4-wheeled model (dia. x W) 560 x 203 mm Tyre size rear, 4-wheeled model (dia. x W) 560 x 254 mm Conveyor system Belt width 400 mm Theoretical conveyor capacity 82 m 3 / h Shipping dimensions Machine dimensions (L x W x H) 3,450 x 1,670 x 2,450 mm Conveyor dimensions (L x W x H) 6,100 x 820 x 1,200 mm * 1 = The maximum milling depth may deviate from the value indicated, due to tolerances and wear.

3 3,410 4, , , ,180 1,340 1, ,315 2,365 4, // 3

4 Front view of W 50, 3-wheeled model with support wheel folded out 1,670 with support wheel folded in 1, Front view of W 50, 4-wheeled model 1,670 1,340 with support wheel folded out with support wheel folded in

5 Smallest possible milling radii of W 50, 3-wheeled model, 50 mm milling depth R 2,650 R 100 Smallest possible milling radii of W 50, 4-wheeled model, 50 mm milling depth R 2,400 R // 5

6 Machine transport with optional folding conveyor and canopy roof 3,410 2,650 2,650 3,400 3, , ,060 Machine weights cold milling machine W 50 Empty weight of machine in three-wheel design without conveyor Operating weight, CE * Maximum operating weight (full tanks, full range of equipment) 6,350 dan (kg) 6,750 dan (kg) 7,887 dan (kg) Weights of filling media Water tank filling in kg Diesel tank filling in kg (0.83 kg/l) 500 dan (kg) 137 dan (kg) Optional equipment features increasing / reducing empty weight Conveyor, long Folding conveyor, long Conveyor, short Four-wheel design in lieu of three-wheel design Canopy 450 dan (kg) 500 dan (kg) 250 dan (kg) 250 dan (kg) 150 dan (kg) * = Weight of machine with half-full water tank, half-full fuel tank, driver (75 kg) and on-board tools.

7 Equipment features of cold milling machine W 50 Standard equipment: Basic machine with engine Water-cooled engine Highly effective soundproofing of entire engine compartment Standard painting in Wirtgen white with orange stripes Milling drum housing and loading of milled material Heavy-duty rear cover panel, opening wide if required Right-hand side plate in hinged design Hydraulically lifting side plates, left and right Milling drums Milling drum, milling width 500 mm, tool spacing 15 mm, in welded double-pin toolholder design Machine and levelling control Digital multifunctional display in control panel Convenient control console with practical, illuminated switches Mechanical depth indication via indicator gauge Automatically engageable hydraulic traction control (flow divider) Manual milling speed control Engageable water injection in milling chamber Operator s platform Convenient access to operator s platform Fully anti-vibration mounted operator s platform Driver s seat adjustable in direction of travel Height-adjustable steering wheel Multifunctional machine control integrated in right-hand armrest Lockable control panel covers One exterior rear view mirror each left and right Reversing horn Chassis and height adjustment 3-wheeled chassis Mechanically folding rear right support wheel Two speeds for height adjustment Miscellaneous Lighting package comprising two plug-in halogen spotlights, one halogen spotlight with magnetic base, as well as one rotating beacon Comprehensive tool kit Safety package with emergency stop button Additional storage compartment for cutting tool containers Warranty of 12 months or 1,000 engine operating hours Machine commissioning by qualified personnel Optional equipment: Basic machine with engine Operation of machine with biodegradable hydraulic fluid Special painting in one, two or several colours Milling drum housing and loading of milled material Battery-operated hydraulic cutting tool extractor Hydraulically pressurized scraper blade Discharge conveyor, 5,600 mm long Mechanically folding discharge conveyor, 5,600 mm long Short discharge conveyor, 1,100 mm long Hydraulically lifting sealing plate, front Milling drums Milling drum, milling width 500 mm, tool spacing 20 mm, HT01 toolholder system Milling drum, milling width 500 mm, tool spacing 6 mm, HT5 toolholder system Milling drum, milling width 500 mm, tool spacing 3 mm, HT4 toolholder system Milling drum for water gutters, milling width 500 mm, tool spacing 15 mm, HT5 toolholder system Milling drum, milling width x25 mm, tool spacing 6 mm, HT5 toolholder system Milling drum, milling width 400 mm, tool spacing 12 mm, HT01 toolholder system Milling drum, milling width x25 mm, tool spacing 3 mm, HT4 toolholder system Milling drum, milling width 300 mm, tool spacing 12 mm, HT01 toolholder system Milling drum, milling width 300 mm, tool spacing 3 mm, HT4 toolholder system Attachment milling ring, milling width 80 mm, milling depth 300 mm Mounting carriage for milling drums Machine and levelling control Digital electric height indicator Level Pro levelling system with one wire-rope sensor each left and right Slope sensor Operator s platform Individually adjustable driver s seat offering multiple adjustment options Protective canopy with manual lowering and side-moving feature Chassis and height adjustment 4-wheeled chassis Miscellaneous Lighting package comprising one halogen spotlight with magnetic base, as well as two built-in spotlights plus direction indicators at the front of the machine, and two side lights plus direction indicators at the loading conveyor Additional hydraulic connections for ancillary hydraulic equipment 6 // 7

8 Illustrations are without obligation. Technical details are subject to change without notice. Performance data depend upon operating conditions. No EN-09/10 by Wirtgen GmbH Printed in Germany Wirtgen GmbH Reinhard-Wirtgen-Strasse Windhagen Germany Phone: +49 (0) 26 45/131-0 Fax: +49 (0) 26 45/ Internet: info@wirtgen.com