MATERIAL HANDLER. MHL350 E TIER 4i. Specifications. Features. Operating weight 70,548-78,264 lbs ( t) Reach up to 52.

Transcription

1 MHL35 E TIER 4i MATERIAL HANDLER Specifications Operating weight 7,548-78,264 lbs ( t) Engine output 214 hp (16 kw) Reach up to 52.5 ft (16 m) Features Fuel efficient high output engine with a reduction in emissions to comply with Tier 4i (Stage IIII B) standards Powerful 214 hp turbo diesel engine and high performance hydraulic system allows for loading and unloading with speed and precision New wide-screen multi-function color display with integrated rear camera view Hydraulically elevating cabin with conveniently located userfriendly operator controls

2 SPECIFICATIONS MACHINE WEIGHT Operating Weight without attachments 7,548-78,264 lbs ( t) ENGINE Manufacturer and model Configuration Engine management system Type Engine output power Deutz TCD 6.1 L6 6-cylinder inline EMR IV 4-stroke diesel, common rail direct injection, turbocharger, controlled exhaust gas recirculation, diesel particulate filter with automatic regeneration 214 hp (16 kw) Nominal speed 2 min -1 Displacement 37 in 3 (6.1 L) Cooling system Emission standard Air filter design Coolant / charge air cooling with fan speed control system; optional reversing function EPA Tier 4i / III B Two-stage filter with safety cartridge and pre-separator with discharge valve Fuel tank capacity gal (38 L) ELECTRICAL SYSTEM Alternator Operating voltage Battery Lighting set Generator TRAVEL DRIVE 28 V / A 24 V 2 x 12 V / 1 Ah / 76 A (in accordance with EN standards) 2 x H3 headlamps, turn indicators and tail lights 2 kw DC generator with controls and insulation monitoring, driven by V-belt direct from diesel engine Hydrostatic travel drive via infinitely variable axial piston motor with directly mounted travel brake valve, two-speed power shift gear, 4-wheel drive Maximum speed, 1st gear 3.1 mph (5 km/h) Maximum speed, 2nd gear 12.4 mph (2 km/h) Gradeability 39% max Turning radius 28.5 ft (8.7 m) SWING DRIVE Swing gear Drive Upper carriage swing speed Swing brake Double row, internally geared ball-race slewing ring 3-stage planetary gear with integrated multi-disc brake Infinitely variable from - 7 rpm Electrically operated UNDERCARRIAGE Front axle Rigid axle with integral drum brake, planetary drive, max. steering angle: 27 Rear axle Oscillating axle with integral drum brake and selectable oscillation lock, planetary drive Support 4-point stabilizer system Tires Solid rubber, 8-ply BRAKE SYSTEM Service brake Parking brake HYDRAULIC SYSTEM Hydraulic single-circuit braking system acting on all four wheel pairs Electrically operated disc brake on travel gearbox, acting on both front and rear axles LINDE mobile hydraulic system with load limit control and fuel-saving power demand control. Separate hydraulic oil cooler, temperature-controlled fan speed, with optional reversing function Hydraulic oil filter Integral return filter in oil tank for work hydraulics, with 3 operating hrs service interval; oil filtration on all auxiliary circuits Max. pump flow rate 2 x 87 g/min (2 x 33 L/min) Max. operating pressure 4,641/5,149 psi (32/355 bar) Hydraulic oil tank 87 gal (33 L) OPERATOR CAB Infinitely variable hydraulic height-adjustment with eye level up to 18.4 ft (5.6 m) above ground. Flexibly mounted. Sound-insulated; heat-insulating glass windows for optimum view; windshield with pull-down sunblind that slides under the cab roof; viewing window on cab roof; sliding window in cab door; height and tilt-adjustable steering column. Heating Infinitely variable heating with 3-speed fan, 6 adjustable defroster nozzles (hot water system) Operator s seat: Air-cushioned high-comfort seat with integrated headrest, safety belt and lumbar support, seat heating with integrated a/c function optional. Seat position, seat inclination and seat cushion multi-adjustable relative to position of armrests and pilot control units, allowing for low-fatigue operation. Monitoring: Ergonomic layout; glare-free instrumentation. Multifunction display, automatic monitoring and recording of abnormal operating conditions (including all hydraulic oil filters, hydraulic oil temperature (cold/ hot) coolant temperature and charge air temperature condition of cooling system, diesel particulate filter load), visual and audible warning indication with shutdown of pilot controls / engine power reduction. Diagnosis of individual sensors available via the multifunction display. Rear view camera. Air conditioning Automatic Noise level (guaranteed) in accordance with directive 2/14 EC L W(A) = 1 db(a) max allowable under 2/14 EC L W(A) = 4 db(a) Vibrations: Weighted r.m.s. value of acceleration of upper limbs is below 2.5 m/s 2. Weighted r.m.s. value of acceleration for seat area and feet is bleow.5 m/s 2. OFFICIAL APPROVALS Certified in accordance with CE regulations

3 EQUIPMENT MHL35 E TIER 4i ENGINE STANDARD OPTIONAL CAB STANDARD OPTIONAL Exhaust gas turbocharger Cab elevation system Charge air cooling Safety glass Direct electronic fuel injection/ common rail Hinged windscreen Automatic idle Sliding window in cab door Engine diagnostics interface Glazed roof panel System-controlled fan drive with fan speed monitoring Hinged roof opening SUPERSTRUCTURE STANDARD Separate cooling systems (for engine and hydraulic oil) Cooling system fan speeds controlled by operating parameters Fan drive reversing function Lockable maintenance hatches, with gas struts Automatic central lubrication system Rear view camera Reversing alarm Electric refuelling pump Lighting protection Special paint EQUIPMENT STANDARD 2 kw DC generator with controls and insulation monitoring Close proximity range limiter for dipper stick Coolant and hydraulic oil level monitoring system Filter system for attachments Hose rupture protection for lift cylinders Hose rupture protection for dipperstick cylinders Overload warning device Quick coupling on dipperstick Cut-off ball valve on dipperstick Dipperstick impact protection Cyclonic pre-separator for air-filter Float switch Joystick steering Central lubrication system for quick change hitch suspension H3 headlamps H3 worklights on boom and dipperstick (up to 4) OPTIONAL OPTIONAL Armoured glass (windscreen and roof panel) Windscreen washer system Washer system installed underneath windscreen Air-cushioned operator seat with headrest, seatbelt, and lumbar support Seat heating with integrated a/c function Steering column, height and tilt adjustable Automatic air conditioning system Independent heating system Multi-function display Document clip Protective grilles to front and roof 12V transformer Radio CD player 12V power outlet Fire extinguisher, dry powder Rotating beacon UNDERCARRIAGE 4-wheel differential drive Drum brakes Rear axle oscillating lock 2-speed powershift transmission 4-point stabilizers Stabilizer cylinders with integrated two-way check valves Piston rod protection on stabilizer cylinders Stabilizer plates 16.9 x 23.6 in (43 x 6 mm) 4-point stabilizers, individually controllable Dozer blade with plastic or Hardox edge (in addition to 4-pt stabilizers) Tool box Special paint STANDARD OPTIONAL Xenon worklights on boom and dipperstick (up to 4) Front-mounted Xenon worklights (up to 2) Xenon worklights on cab roof (up to 4)

4 DIMENSIONS 1.48 ft (45 mm) 4.2 ft (1226 mm) 4.8 ft (1462 mm) 8.74 ft (2665 mm) 9.84 ft (3 mm) ft (562 mm) 9.35 ft (285 mm) ft (339 mm) ft (36 mm) 1.8 ft (33 mm) 5.77 ft (176 mm) 9.81 ft (299 mm).96 ft (334 mm) Machine width with stabilizers down ft (485 mm).

5 TRANSPORT DIMENSIONS MHL35 E TIER 4i Dimensions Reach 49 ft (15. m) Reach 52.5 ft (16. m) Reach 48 ft (14.7 m) Multi-purpose stick A ft (12,6 mm) ft (12,57 mm) ft (12,6 mm) B ft (8,45 mm) ft (5,6 mm) 2.93 ft (6,38 mm) C 4.43 ft (1,35 mm) 4.43 ft (1,35 mm) 4.43 ft (1,35 mm) D / ft* (3,39 / 3,6 mm*) / ft* (3,39 / 3,6 mm*) / ft* (3,39 / 3,6 mm*) E 9.91 ft (3,2 mm) ft (3,6 mm) 9.97 ft (3,4 mm) * including cab roof protective grille

6 WORKING RANGES Boom 27.9 ft (8.5 m) Dipperstick 23.6 ft (7.2 m) Cactus Grab Reach in meters Reach in feet

7 LIFTING CAPACITIES 52.5 FT (16 M) REACH WITH DIPPERSTICK Loading Equipment: Boom 27.9 ft (8.5 m). Dipperstick 23.6 ft (7.2 m). MHL35 E TIER 4i HEIGHT ft UNDERCARRIAGE STABILIZERS REACH ft non supported (9,36*) 4-pt. supported 9,36* (9,36*) non supported (,3*) (7,38*) 4-pt. supported,3* (,3*) 7,38*(7,38*) non supported (,38*) (7,72*) 4-pt. supported,38* (,38*) 7,72*(7,72*) non supported (11,94*) (9,62) (7,23*) 4-pt. supported 11,94* (11,94*),15*(,15*) 7,23*(7,23*) non supported (12,67) (9,66) (7,52) (5,83*) 4-pt. supported 13,1* (13,1*) 11,77*(11,77*) 9,57*(9,57*) 5,83*(5,83*) non supported (12,5) (9,55) (7,47) (5,9) 4-pt. supported 13,8* (13,8*) 12,4*(12,4*) 11,25*(11,25*) 8,29*(8,29*) non supported (16,4*) (12,14) (9,3) (7,32) (5,84) (4,67) 4-pt. supported 16,4* (16,4*) 14,25* (14,25*) 12,66* (12,66*) 11,37* (11,37*) 9,5 (,*) 6,33* (6,33*) non supported (15,68) (11,6) (8,95) (7,8) (5,69) (4,6) 4-pt. supported 17,37* (17,37*) 14,89* (14,89*) 13,3* (13,3*) 11,39 (11,56*) 9,35 (,33*) 7,79 (8,36*) non supported (22,28*) (2,84) (14,6) (,93) (8,5) (6,78) (5,5) (4,5) 4-pt. supported 22,28* (22,28*) 23,4* (23,4*) 18,73* (18,73*) 15,65* (15,65*) 13,46* (13,46*) 11,8 (11,77*) 9,15 (,39*) 7,68 (9,12*) non supported (28,74) (18,62) (13,38) (,18) (8,2) (6,46) (5,3) (4,39) 4-pt. supported 37,43* (37,43*) 26,* (26,*) 2,5* (2,5*) 16,37* (16,37*) 13,18 (13,83*),73 (11,93*) 8,93 (,39*) 7,55 (8,98*) non supported (11,85*) (16,59) (12,22) (9,45) (7,54) (6,15) (5,9) (4,27) 4-pt. supported 11,85* (11,85*) 27,66* (27,66*) 2,85* (2,85*) 15,96 (16,84*) 12,67 (14,4*),4 (11,95*) 8,7 (,26*) 7,42 (8,7*) non supported (8,45*) (15,2) (11,32) (8,85) (7,14) (5,88) (4,92) (4,18) 4-pt. supported 8,45* (8,45*) 2,37* (2,37*) 19,83 (21,6*) 15,24 (16,86*) 12,24 (13,94*),1 (11,74*) 8,53 (9,92*) 7,32 (8,17*) non supported (8,6*) (14,49) (,74) (8,43) (6,84) (5,68) (4,8) (4,13) 4-pt. supported 8,6* (8,6*) 15,84* (15,84*) 19,18 (2,23*) 14,78 (16,28*) 11,92 (13,4*) 9,89 (11,18*) 8,4 (9,25*) 7,25* (7,25*) non supported (14,24) (,47) (8,2) (6,67) (5,57) (4,75) 4-pt. supported 15,6* (15,6*) 18,39* (18,39*) 14,53 (14,97*) 11,73 (12,33*) 9,78 (,13*) 8,* (8,*) Load capacities are stated in pounds (lbs). The pump pressure is 5,149 psi (355 bar). The values, in accordance with ISO 567, amount to 75% of the static tipping load or 87% of the hydraulic lifting force (marked *). They apply to slewing operations through 36 on a firm and level surface. Values in parenthesis apply to the longitudinal direction of the undercarriage. The non supported values apply when the load is hoisted above the front or rear axle with the oscillating axle locked. The weight of the attached hoisting equipment (grab, magnet, quick change hitch, etc.) must be deducted from the capacity values. In accordance with harmonised EU standard EN 474-5;26, hose-rupture safety valves on the lift cylinders and an overload warning device are required for crane operations.

8 WORKING RANGES Boom 27.9 ft (8.5 m) Dipperstick 2.3 ft (6.2 m) Cactus Grab Reach in meters Reach in feet

9 LIFTING CAPACITIES 49 FT (15 M) REACH WITH DIPPERSTICK Loading Equipment: Boom 27.9 ft (8.5 m). Dipperstick 2.3 ft (6.2 m). MHL35 E TIER 4i HEIGHT ft UNDERCARRIAGE STABILIZERS REACH ft non supported (12,1*) (8,28*) 4-pt. supported 12,1* (12,1*) 8,28* (8,28*) non supported (12,59*) (9,59*) 4-pt. supported 12,59* (12,59*) 9,59* (9,59*) non supported (14,52*) (12,1) (9,15) 4-pt. supported 14,52* (14,52*) 12,63* (12,63*) 9,53* (9,53*) non supported (15,94*) (12,17) (9,27) (7,17) 4-pt. supported 15,94* (15,94*) 14,6* (14,6*) 12,36* (12,36*) 8,52* (8,52*) non supported (16,29) (12,2) (9,2) (7,19) (5,65) 4-pt. supported 16,95* (16,95*) 14,78* (14,78*) 13,13* (13,13*) 11,4* (11,4*) 5,9* (5,9*) non supported (15,77) (11,67) (8,98) (7,8) (5,65) 4-pt. supported 17,67* (17,67*) 15,2* (15,2*) 13,35* (13,35*) 11,38 (11,87*) 9,6* (9,6*) non supported (21,4) (14,96) (11,16) (8,66) (6,88) (5,55) 4-pt. supported 23,16* (23,16*) 18,74* (18,74*) 15,8* (15,8*) 13,67* (13,67*) 11,17 (12,*) 9,19 (,6*) non supported (3,66) (19,53) (13,9) (,52) (8,25) (6,63) (5,4) (4,44) 4-pt. supported 36,* (36,*) 25,56* (25,56*) 19,98* (19,98*) 16,46* (16,46*) 13,43 (14,*),9 (12,14*) 9,3 (,58*) 6,45* (6,45*) non supported (14,19*) (17,47) (12,79) (9,85) (7,83) (6,36) (5,24) (4,37) 4-pt. supported 14,19* (14,19*) 27,6* (27,6*) 21,* (21,*) 16,32 (16,99*) 12,97 (14,24*),6 (12,18*) 8,86 (,46*) 7,52* (7,52*) non supported (15,84) (11,82) (9,24) (7,43) (6,) (5,9) (4,3) 4-pt. supported 22,86* (22,86*) 2,38 (21,43*) 15,65 (17,18*) 12,54 (14,25*),34 (12,3*) 8,7 (,17*) 7,46* (7,46*) non supported (14,93) (11,15) (8,77) (7,12) (5,9) (4,97) (4,28) 4-pt. supported 15,5* (15,5*) 19,6 (2,93*) 15,13 (16,83*) 12,2 (13,88*),12 (11,59*) 8,58 (9,58*) 6,72* (6,72*) non supported (14,45*) (,78) (8,48) (6,9) (5,77) (4,9) 4-pt. supported 14,45* (14,45*) 19,2* (19,2*) 14,82 (15,78*) 11,97 (13,*) 9,98 (,7*) 8,5* (8,5*) non supported (,68) (8,37) (6,83) 4-pt. supported 16,8* (16,8*) 13,93* (13,93*) 11,46* (11,46*) Load capacities are stated in pounds (lbs). The pump pressure is 5,149 psi (355 bar). The values, in accordance with ISO 567, amount to 75% of the static tipping load or 87% of the hydraulic lifting force (marked *). They apply to slewing operations through 36 on a firm and level surface. Values in parenthesis apply to the longitudinal direction of the undercarriage. The non supported values apply when the load is hoisted above the front or rear axle with the oscillating axle locked. The weight of the attached hoisting equipment (grab, magnet, quick change hitch, etc.) must be deducted from the capacity values. In accordance with harmonised EU standard EN 474-5;26, hose-rupture safety valves on the lift cylinders and an overload warning device are required for crane operations.

10 WORKING RANGES Boom 27.9 ft (8.5 m) Dipperstick 18.4 ft (5.6 m) Cactus Grab Reach in meters Reach in feet

11 LIFTING CAPACITIES 48 FT (14.7 M) REACH WITH MULTI-PURPOSE STICK Loading Equipment: Boom 27.9 ft (8.5 m). Dipperstick 18.4 ft (5.6 m). MHL35 E TIER 4i HEIGHT ft UNDERCARRIAGE STABILIZERS REACH ft non supported (,26*) 4-pt. supported,26* (,26*) non supported (11,99*) 4-pt. supported 11,99* (11,99*) non supported (14,92*) (11,4) (7,48*) 4-pt. supported 14,92* (14,92*) 12,28* (12,28*) 7,48* (7,48*) non supported (15,77) (11,5) (8,65) (5,87*) 4-pt. supported 16,9* (16,9*) 14,66* (14,66*) 11,88* (11,88*) 5,87* (5,87*) non supported (15,52) (11,35) (8,6) (6,63) 4-pt. supported 17,19* (17,19*) 14,8* (14,8*) 13,* (13,*),39* (,39*) non supported (21,69*) (14,97) (11,) (8,4) (6,54) (5,12) 4-pt. supported 21,69* (21,69*) 17,9* (17,9*) 15,18* (15,18*) 13,18* (13,18*),83 (11,59*) 6,65* (6,65*) non supported (3,17*) (2,26) (14,13) (,49) (8,8) (6,36) (5,6) 4-pt. supported 3,17* (3,17*) 23,8* (23,8*) 18,9* (18,9*) 15,72* (15,72*) 13,27 (13,27*),64 (11,67*) 8,69 (9,76*) non supported (28,36) (18,33) (13,8) (9,87) (7,7) (6,13) (4,94) 4-pt. supported 37,68* (37,68*) 26,3* (26,3*) 2,* (2,*) 16,28* (16,28*) 12,85 (13,7*),39 (11,74*) 8,57 (,5*) non supported (16,36) (12,2) (9,23) (7,3) (5,88) (4,8) 4-pt. supported 27,58* (27,58*) 2,64* (2,64*) 15,67 (16,66*) 12,42 (13,83*),12 (11,68*) 8,42 (9,85*) non supported (14,97) (11,14) (8,67) (6,94) (5,65) (4,68) 4-pt. supported 16,89* (16,89*) 19,66 (2,87*) 15,6 (16,64*) 12,3 (13,68*) 9,88 (11,4*) 8,29 (9,42*) non supported (13,59*) (,59) (8,27) (6,67) (5,48) (4,59) 4-pt. supported 13,59* (13,59*) 19,3 (19,93*) 14,62 (16,2*) 11,74 (13,12*) 9,7 (,8*) 8,2 (8,63*) non supported (13,74*) (,34) (8,5) (6,5) (5,39) 4-pt. supported 13,74* (13,74*) 17,94* (17,94*) 14,38 (14,67*) 11,57 (12,*) 9,6* (9,6*) Load capacities are stated in pounds (lbs). The pump pressure is 5,149 psi (355 bar). The values, in accordance with ISO 567, amount to 75% of the static tipping load or 87% of the hydraulic lifting force (marked *). They apply to slewing operations through 36 on a firm and level surface. Values in parenthesis apply to the longitudinal direction of the undercarriage. The non supported values apply when the load is hoisted above the front or rear axle with the oscillating axle locked. The weight of the attached hoisting equipment (grab, magnet, quick change hitch, etc.) must be deducted from the capacity values. In accordance with harmonised EU standard EN 474-5;26, hose-rupture safety valves on the lift cylinders and an overload warning device are required for crane operations.

12 Effective Date: January 212. Product specifications and prices are subject to change without notice or obligation. The photographs and/or drawings in this document are for illustrative purposes only. Refer to the appropriate Operator s Manual for instructions on the proper use of this equipment. Failure to follow the appropriate Operator s Manual when using our equipment or to otherwise act irresponsibly may result in serious injury or death. The only warranty applicable to our equipment is the standard written warranty applicable to the particular product and sale and Terex makes no other warranty, express or implied. Products and services listed may be trademarks, service marks, or trade names of Terex Corporation and/or its subsidiaries in the USA and other countries. All rights are reserved. Terex is a registered trademark of Terex Corporation in the USA and many other countries. 212 Terex Corporation. Terex Construction 88 Rostin Road, Southaven, MS USA Tel +1 (888) 9-TEREX MHL35E Tier4i