Technical specification Cold Milling Machine W 250 i

Transcription

1 Technical specification Cold Milling Machine W 250 i

2 Technical specification Cold milling machine W 250 i Milling drum Milling width 7 3 (2,200 mm) Milling depth * (0 350 mm) Tool spacing 5 / 8 (15 mm) Number of tools 188 Drum diameter with tools 45 (1,140 mm) Engine Manufacturer CUMMINS Type QSX 15 + QSL 9 Cooling Water Number of cylinders Rated power at 2,000 min kw / 990 HP / 1,004 PS Maximum power at 1,800 min kw / 991 HP / 1,005 PS Operating power at 1,600 min kw / 947 HP / 960 PS Displacement 6.3 gal (23.8 l) Theoretical maximum fuel consumption 57.6 gal/hr (218 l / h) Actual fuel consumption in field mix 22.5 gal/hr (85 l / h) Emission standards EC Stage 3b / US Tier 4i Electrical system 24 V Tank capacities Fuel tank gal (1,460 l) Hydraulic fluid tank 79.3 gal ( 300 l) Water tank 1,281.2 gal (4,850 l) Driving properties Max. travel and milling speed 3.28 mph (0 88 m / min) Crawler tracks Crawler tracks front and rear (L x W x H) 6 11 x 15 x 30 (2,100 x 370 x 750 mm) Loading of milled material Belt width of primary conveyor 3 7 (1,100 mm) Belt width of discharge conveyor 3 7 (1,100 mm) Theoretical capacity of discharge conveyor yd 3 (668 m 3 / h) Shipping dimensions Standard FB 2,200 Machine (L x W x H) x 9 4 x 9 10 (10,300 x 2,840 x 3,000 mm) Discharge conveyor (L x W x H) 26 9 x 5 7 x 4 11 (8,150 x 1,700 x 1,500 mm) * 1 = the maximum milling depth may deviate from the value indicated, due to tolerances and wear

3 Dimensions in American standard and mm 56 3 (17,150) 53 2 (16,200) (10,300) 3 8 (1,120) 9 2 (2,800) 10 8 (3,250) 3 9 (1,150) 24 (600) 8 2 (2,500) 3 7 (1,100) 9 4 (2,840) 7 3 (2,200) 9 10 ( 3,000) 9 10 (3,000) (4,850) // 3

4 Empty weight of machine without filling media Operating weight, CE * Maximum operating weight (full tanks, full range of equipment), milling width 7 3 (2,200 mm) Water tank filling in lbs/kg Diesel tank filling in lbs/kg (1.83 lbs/l / 0.83 kg / l) FCS Light milling drum assembly and milling drum, milling width 7 3 (2,200 mm), milling depth 0 14 (0 350 mm) milling width 8 2 (2,500 mm), milling depth 0 14 (0 350 mm) milling width 10 2 (3,100 mm)), milling depth 0 14 (0 350 mm) milling width 11 6 (3,500 mm), milling depth 0 14 (0 350 mm) milling width 12 6 (3,800 mm), milling depth 0 14 (0 350 mm) milling width 14 5 (4,400 mm), milling depth 0 14 (0 350 mm) FCS Light milling drum, milling width 7 3 (2,200 mm), HT22 and tool spacing 25 mm FCS Light fine milling drum,milling width 7 3 (2,200 mm), HT5 and tool spacing 6x2 mm Canopy Conveyor in folding conveyor design Operator s platform with comfortable seats VCS - Vacuum Cutting System Supplementary weight for flexible use Machine weights of cold milling machine W 250 i 89,508 lbs (40,600 kg) 96,430 lbs (43,740 kg) 112,017 lbs (50,810 kg) Weights of filling media 10,692 lbs (4,850 kg) 2,672 lbs (1,212 kg) Optional equipment features increasing / reducing empty weight 1,323 lbs (600 kg) 3,748 lbs (1,700 kg) 9,921 lbs (4,500 kg) 14,661 lbs (6,650 kg) 18,298 lbs (8,300 kg) 25,574 lbs (11,600 kg) -397 lbs (-180 kg) 1,720 lbs (780 kg) 595 lbs (270 kg) 1,323 lbs (600 kg) 551 lbs (250 kg) 331 lbs (150 kg) 3,307 lbs (1,500 kg) * = weight of machine with half-full water tank, half-full fuel tank, driver (165 lbs /75 kg) and on-board tools Machine transport with optional canopy and hydraulic folding conveyor Dimensions in American standard and mm (14,300) Canopy in transport position 13 (3,960) 9 10 (3,000) 29 (730) 9 10 (3,000)

5 Rear view of machine with different milling width options Dimensions in American standard and mm 5 (128) 7 (170) 8 (200) 7 3 (2,200) 7 (170) 8 2 (2,500) 10 2 (3,100) 9 4 (2,840) 10 4 (3,140) 12 4 (3,770) Milling width 7 3 (2,200 mm) Milling width 8 2 (2,500 mm) Milling width 10 2 (3,100 mm) 8 (200) 8 (200) 8 (200) 11 6 (3,500) 12 6 (3,800) 14 5 (4,400) 13 8 (4,170) 14 8 (4,470) 16 8 (5,070) Milling width 11 6 (3,500 mm) Milling width 12 6 (3,800 mm) Milling width 14 5 (4,400 mm) 4 // 5

6 Milling radius, 150 mm milling depth Dimensions in American standard and mm Milling width 7 3 (2,200): R min = 57 5 (17,500) Milling width 8 2 (2,500): R min = (8,500) Milling width 12 6 (3,800): R min = 19 8 (6,000) Milling width 7 3 (2,200): R min = 8 10 (2,700) Milling width 8 2 (2,500): R min = 7 10 (2,400) Milling width 12 6 (3,800): R min = 6 3 (1,900)

7 Equipment features of cold milling machine W 250 i Standard equipment: Basic machine with engine Machine frame in dual wasp waist design Hydraulically opening, soundproof engine cowling Engine cooling system with temperature-governed fan speed Air compressor system Automatically engaging high-pressure water system, 18 bar, 17.7 gal / min (67 l / min) Battery-operated hydraulic module for emergency functions Large storage compartments for cutting tool containers Standard painting in Wirtgen white with orange stripes Milling drum housing Milling drum housing for milling width 7 3 (2,200 mm) without FCS features Three electrically switchable milling drum speeds 105 1/min /min /min Hydraulic gradation control beam with conveyor lift function Hydraulically movable and adjustable scraper blade with automatic locking function Hydraulically lifting edge protection plates, clearance right 18 (450 mm), clearance left 14 (350 mm) Two separately engageable water spray bars in the milling drum assembly Automatic, drive pressure-dependent water pressure control system Milling drums Milling drum, milling width 7 3 (2,200 mm), HT22, tool spacing 15 mm Multiple-use ejector system Loading of milled material Discharge conveyor without folding design Conveyor system with manually or automatically adjustable conveying speed Water spray system at primary conveyor Slewing angle of discharge conveyor ± 60 Machine and leveling control LEVEL PRO automatic leveling system with hydraulic milling depth sensors at the side plates, left and right Clearly structured main control panel with functional switches Multifunctional control screen with integrated display of major machine operation parameters Multifunctional truck loading indicator integrated in control screen Comprehensive machine diagnostics indicator integrated in control screen Automatically engaging milling power control unit Two exterior control panels for operation by ground staff Digital electric height indicator Pre-installation for up to 7 leveling sensors per machine side Operator s platform Fully anti-vibration mounted operator s platform Convenient, individually adjustable control panel Convenient access to operator s platform with stand-up seat, left and right Lockable control panel covers Two mirrors at the front, one mirror at the centre, one mirror at the rear of the machine Chassis and height adjustment PTS - machine is automatically aligned parallel to the pavement surface ISC - intelligent track speed control with hydraulic four-track drive High machine stability through four-fold full-floating axle Four-track steering with freely selectable steering modes Extremely wear-resistant, two-piece EPS polyurethane track pads Miscellaneous Lighting package with 11 halogen working spotlights Four LED lights in the area of the milling drum unit Welcome and Go home lights feature including LED lighting in the area of the operator s access and platform Comprehensive toolkit in lockable toolbox Comprehensive safety package with 6 emergency stop switches European design type certification, GS mark (Geprüfte Sicherheit = Tested Safety) and CE conformity Standard warranty of 12 months or 1,000 engine operating hours Machine commissioning by qualified personnel Comprehensive operating manual and machine documentation Optional equipment: Basic machine with engine Special painting in one, two or several colours Milling drum housing Milling drum housing for milling width 7 3 (2,200 mm), FCS Light Milling drum housing for milling width 8 2 (2,500 mm) in FCS design Milling drum housing for milling width 10 2 (3,100 mm) in FCS design Milling drum housing for milling width 11 6 (3,500 mm) in FCS design Milling drum housing for milling width 12 6 (3,800 mm) in FCS design Milling drum housing for milling width 14 5 (4,400 mm) in FCS design Drum turning device for cutting tool replacement Pneumatic cutting tool driver and extractor Electro-hydraulically operated cutting tool extractor Fold-out additional seats at the rear crawler tracks for cutting tool replacement Mounting carriage for milling drum housing of 12 6 (3,800 mm) milling width Milling drums FCS Light milling drum, milling width 7 3 (2,200 mm), HT22, tool spacing 18 mm FCS Light milling drum, milling width 7 3 (2,200 mm), HT22, tool spacing 25 mm FCS Light fine milling drum, milling width 7 3 (2,200 mm), HT5, tool spacing 6x2 mm Milling drum, milling width 8 2 (2,500 mm), HT22, tool spacing 15 mm Milling drum, milling width 10 2 (3,100 mm), HT22, tool spacing 15 mm Milling drum, milling width 11 6 (3,500 mm), HT22, tool spacing 15 mm Milling drum, milling width 12 6 (3,800 mm), HT22, tool spacing 15 mm Milling drum, milling width 14 5 (4,400 mm), HT22, tool spacing 15 mm Loading of milled material Hydraulically folding discharge conveyor VCS Vacuum Cutting System Conveyor support legs for machine transport Machine and leveling control Data interface with data transmission in accordance with WIFMS Up to two additional LEVEL PRO control panels Detection of actual milling depth via sensor package and readout on LEVEL PRO and machine screen RAPID SLOPE cross slope sensor Hydraulic cylinder sensor to scan the milling depth in front of the milling drum, right Hydraulic cylinder sensor to scan the milling depth in front of the milling drum, left and right Laser sensor with laterally movable hydraulic leveling arm including laser transmitter and laser receiver Sonic ski sensor for scanning a stringline Multiplex sensors with two additional ultrasonic sensors including bracket and cable in 3-fold Multiplex system package, right Multiplex sensors with two additional ultrasonic sensors including bracket and cable in 3-fold Multiplex system package, left and right Pre-installation of laser sensor including laser signal receiver but excluding laser signal transmitter Pre-installation for 3D GPS leveling including receiver mast Operator s platform Operator s platform with individually adjustable, comfortable driver s seats, left and right Operator s cabin as part of the Operator Comfort System Hot-air blower heating in the footwell area of the operator s platform, left and right Complete set of fold-in mirrors, partly electric, with stop-and-go indicator Hydraulically retracting protective canopy Miscellaneous Screen system including display Hydraulically operated electrical generator with a capacity of 4 kw at 220 volts Hydraulically operated electrical generator with a capacity of 4 kw at 110 volts Lighting balloon, 2 kw operated at 220 volts Lighting balloon, 2 kw operated at 110 volts Electrically operated diesel tank filling pump Hydraulically operated water tank filling pump Optional lighting package with 5 halogen and 6 Xenon working lights Bolt-on supplementary weight 3,307 lbs (1,500 kg) Large storage compartment in lieu of standard storage compartment at the rear of the machine Hydraulically operated high-pressure water cleaner, 2,175 lbs / sq inch (150 bar), 4 gal / min (15 l / min) 6 // 7

8 Illustrations are without obligation. Technical details are subject to change without notice. Performance data depend upon operating conditions. No US-02/13 by Wirtgen GmbH Printed in Germany Wirtgen America Inc Dana Way Nashville, TN 37013, USA Phone: (615) Fax: (615) Internet: