623CT. TECHNICAL SPECIFICATION Subject to change without notice.
|
|
|
- Arthur Ferguson
- 6 years ago
- Views:
Transcription
1 623CT MOBILE IMPACT CRUSHER with CAT C9-T3 Engine TECHNICAL SPECIFICATION Subject to change without notice.
2 DESCRIPTION: Self Contained Mobile Impact Crusher with the following features: 275Hp CAT C9 Tier III Diesel Engine. Heavy Duty Horizontal Shaft Rotor. 600mm x 350mm (23 x 14 ) Crusher Feed Opening. Hydraulically Adjustable Bar Carrier. Hydraulically Opening Crusher Body. IBF 314 Clutch (Optional Transfluid 19 KPTO Hydraulic Clutch). 800mm (32 ) Wide Hydraulically Folding Feed Conveyor Belt. 650mm (26 ) Wide Hydraulically Folding Product Conveyor Belt. Feed and Product Conveyor Variable Speed Controls. 400mm Wide Crawler Tracks. Large Feed Hopper. Dust Suppression on Crusher Feed-in and feed-out. Fast on Site setup Time 15 Minutes. DIMENSIONS AND WEIGHT: Length Transport: - 15m (49 2 ) Length Working: m (52 11 ) Width Transport: - 2.9m (9 6 ) Width Working: - 2.9m (9 6 ) Height Transport: - 3.4m (11 1 ) Weight Estimated: - 27,000 Kgs (59,525 Lbs) NOTE: The weights and dimensions stated here are given for a standard machine only. Optional extras fitted to the machine and/or transportation laws in force in various countries, may alter the transportation weight and dimensions of the machine. Page 2
3 HOPPER: Hopper Length (with shroud): mm (14 1 ) Hopper Width (with shroud): mm (6 ) Hopper Capacity: - 6m 3 (7.85yd 3 ) Shroud: - YES Feed in Height: - 3.8m (12 5 ) FEED CONVEYOR: Belt Width: - 800mm (32 ) Belt Spec: - Plain EP500/ Drive Drum Dia: - 220mm (8 ) Tail Drum Dia: - 220mm (8 ) Gearbox: - Brevini Gearbox Ratio: - 1:18 Gearbox Torque: Nm cont Motor: - 130cc Max Flow Rate: Lpm (31.44 US Gpm) Variable Speed Control: - YES Belt Speed: - Factory 27 M/min CRUSHER: Feed Opening: - 600mm x 350mm (23 x 14 ) Maximum Crusher Speed: Rpm Minimum Crusher Setting: - 10mm (0.4 ) Maximum Crusher Setting: - 60mm (2.4 ) Maximum Feed Size: - 200mm (8 ) Crusher Drive Required: - Direct Drive SPC V-Belts 6off Rotor Size: - 600mm (22.6 ) wide x 1068mm (42 ) Dia. Pulley Size: - SPC 700, 6 Groove Hammers: - 3 off Bar Carrier: - 4 Bar Wear Plate Thickness: - 30mm Hydraulic Bar Carrier Adjustment: - YES Hydraulic Crusher Body Opening: - YES Hydraulic Crusher Adjustment: - YES (Bar Carrier) Page 3
4 MAIN PRODUCT CONVEYOR: ELECTRICS POWER UNIT AND HYDRAULICS: Discharge Height: mm (12 1 ) Belt Width: - 650mm (26 ) Belt Spec: - Plain EP500/ Drive Drum Dia: - 220mm (8 ) Tail Drum Dia: - 220mm (8 ) Motor: - 625cc Max Flow Rate: - 119Lpm (31.44 US Gpm) Variable Speed Control: - YES Belt Speed : - Factory 105 M/min Chassis Cabling: - SWA Cable Emergency Stops: - 5 off, Control Console RH Side Rear Chassis LH & RH Sides Front Chassis LH & RH Sides Start Siren: - YES 10 Second Delay Warning Beacon: - YES Tracking Siren: - YES 10 Second Delay Tracking Beacon: - YES Engine Shutdowns: - Low Oil Pressure - High Water Temp - Air Filter Blockage - Fuel Contamination Crusher Shutdowns: - Clutch Oil Temperature Radio Control Tracks: - OPTIONAL (Hetronic) Pendant Track control: - YES Engine: - CAT C9 TA (TIER III) Engine Power: - 205Kw HP Engine Speed: Rpm Main Flywheel Pump: - DBH 50512off Clutch: - IBF 314 ( Optional Transfluid 19 KPTO) Crusher Drive Pulley: - SPC 250 x 6 Diesel Tank Capacity: Ltrs (110 US Gal) Hydraulic Tank Capacity: Ltrs (154 US Gal) Hydraulic Oil Cooler: - YES Hydraulic Clutch Oil Cooler: - YES Page 4
5 FUEL PERFORMANCE: The fuel consumption rates above are estimated using the BSFC values quoted on the engine performance charts for each model - please note that this value is only accurate at the 100% load figure quoted on this chart. Page 5
6 TRACKS: Gearbox: - RRTD3600 Ratio: - 161:1 Width: - 400mm (15.8 ) Length (overall): mm (13 ) Height: - 740mm (29 ) Motor: - MSI163cc Speed max: Kph (0.81 Mph) Flow Rate: Lpm (31.7 US Gpm) Gradeability: Max slope side to side: - 10 Attachment to Chassis: - Bolt On SAFETY FEATURES: Engine Safety Shutdown Systems Full Safety Guarding for Nip Points Key Switch Operated Tracking System 10 Second Start and Tracking Delays Easy Access Lubrication Points CE Compliance OPTIONS:. 19 KPTO Clutch Metal Detector Picking Platform Autolub System Hydraulic Tipping Grid Remote Control Tipping Grid Manual Tipping Grid Closed Circuit Conveyor Product Conveyor Screenbox Product Conveyor Magnet Scales Radio Remote Control for Tracks Conveyor Dust Covers Working Lights 68 Type Hydraulic Oil E-Stop Pull Wires NOTE: Fitting optional extras to this machine may increase the manufacturing lead time. Page 6
7 WORKING DIMENIONS: Page 7
8 SIEVE ANALYSIS: Page 8
9 NOISE LEVELS: Page 9
700i TECHNICAL SPECIFICATION. MOBILE JAW CRUSHER With CAT C9 Engine. Technical Specification CRUSHERS. SCREENERS. BULK HANDLING
700i MOBILE JAW CRUSHER With CAT C9 Engine TECHNICAL SPECIFICATION Subject to change without notice. DESCRIPTION: Self-Contained Mobile Jaw Crusher with the following features: 300Hp CAT C9 Tier III Diesel
S130 Nov. 2006, issue 005 SPECIFICATIONS. McCloskey S130. All specifications are current as of this printing, but are subject to change
S130 SPECIFICATIONS McCloskey S130 1 DESCRIPTION Heavy duty mobile screener with following features: - 14x5 heavy duty high energy 2 bearing screenbox. - 100Hp Cat engine. - Track or wheel mobile. - Integrated
McCloskey S190 3-Deck
SPECIFICATIONS McCloskey S190 3-Deck 1 DESCRIPTION Heavy duty mobile screener with following features: - 20x5 heavy duty high energy 2 bearing 3 deck screenbox. - 125Hp Cat engine. - Track or wheel mobile.
S190 Nov. 2006, issue 006 SPECIFICATIONS. McCloskey S190. All specifications are current as of this printing, but are subject to change
S190 SPECIFICATIONS McCloskey S190 1 DESCRIPTION Heavy duty mobile screener with following features: - 20x5 heavy duty high energy 2 bearing screenbox. - 125Hp Cat engine. - Track or wheel mobile. - Integrated
SPECIFICATIONS. McCloskey S190 3-Deck S190 3D. May 2012, issue 004 DISTRIBUTOR FOR AFRICA
S190 3D SPECIFICATIONS McCloskey S190 3-Deck DESCRIPTION Heavy duty mobile Screener with following features: S190 3D 20x5 heavy duty high energy 2 bearing 3 deck screenbox. 125Hp Cat engine. Track or wheel
SPECIFICATIONS. McCloskey S130 3-Deck S130 3D. Oct. 2013, issue 002 DISTRIBUTOR FOR AFRICA
SPECIFICATIONS McCloskey S130 3-Deck DESCRIPTION Heavy duty mobile Screener with following features: - 14x5 heavy duty high energy 2 bearing 3 deck screenbox. - 100Hp Cat engine. - Track or wheel mobile.
R105 April. 2009, issue 004 SPECIFICATIONS. McCloskey R105. All specifications are current as of this printing, but are subject to change
SPECIFICATIONS McCloskey R105 1 DESCRIPTION Heavy duty mobile screener with following features: - 12x4.5 heavy duty high energy 2 bearing screenbox. - 100Hp Cat diesel engine. - Track mobile. - Direct
J50 Nov. 2009, issue 000 SPECIFICATIONS. McCloskey J50. All specifications are current as of this printing, but are subject to change
SPECIFICATIONS McCloskey J50 1 DESCRIPTION Heavy duty track mounted Crusher with following features: - 1270 (50 ) x 660 (26 ) single toggle jaw. - 350Hp C9 Cat engine. - Track or Track c\w Wheel bogie.
J50 Apr. 2011, issue 006 SPECIFICATIONS. McCloskey J50. All specifications are current as of this printing, but are subject to change
SPECIFICATIONS McCloskey J50 1 DESCRIPTION Heavy duty track mounted Crusher with following features: - 1270 (50 ) x 660 (26 ) single toggle jaw. - 350Hp C9 Cat engine. - Track or Track c\w Wheel bogie.
R70 June. 2009, rev 002 SPECIFICATIONS. McCloskey R70. All specifications are current as of this printing, but are subject to change
SPECIFICATIONS McCloskey R70 1 DESCRIPTION Heavy duty mobile screener with following features: - 9x4 heavy duty high energy 2 bearing screenbox. - 63Kw (84Hp) JCB 444 diesel engine. - Track mobile. - Direct
i54 Sept. 2009, issue 006 SPECIFICATIONS McCloskey i54 All specifications are current as of this printing, but are subject to change
SPECIFICATIONS McCloskey i54 1 DESCRIPTION Heavy duty track mounted Crusher with following features: - Universal 1200mm (47") diameter x 1350mm (53") wide Impactor. - 430Hp C13 Cat engine. - Track or Track
i44r Jul. 2012, issue 001 SPECIFICATIONS McCloskey i44r All specifications are current as of this printing, but are subject to change
SPECIFICATIONS McCloskey i44r 1 DESCRIPTION Heavy duty track mounted Crusher with following features: - 1050mm (42") diameter x 1100mm (43") wide Impactor. - 350Hp Cat C9 engine. - Track or Track c\w Wheel
S190 Nov. 2006, issue 006 SPECIFICATIONS. McCloskey S190. All specifications are current as of this printing, but are subject to change
S190 Nov. 2006, issue 006 SPECIFICATIONS McCloskey S190 1 Nov. 2006, issue 006 DESCRIPTION Heavy duty mobile screener with following features: - 20x5 heavy duty high energy 2 bearing screenbox. - 125Hp
J45 Nov. 2015, issue 003 SPECIFICATIONS. McCloskey J45. All specifications are current as of this printing, but are subject to change
J45 SPECIFICATIONS McCloskey J45 1 DESCRIPTION Heavy duty track mounted Crusher with following features: - 1140 (45 ) x 688 (27 ) single toggle jaw. - 350Hp C9 / C9.3 Cat engine. - Track or Track c\w Wheel
Powerscreen Chieftain Deck Incline Screen. Specification - Rev /01/2017
2 Deck Incline Screen Specification 14ft Hopper (with grid) wheel 14ft Hopper (with grid) track Total weight 22,000kg (48,502lbs)* 24,900kg (54,895lbs)* Transport Length 16.95m (55 7 ) 15.4m (50 6 ) Width
QA451 TRIPLE DECK DOUBLESCREEN FEATURES & BENEFITS. Rev
TRIPLE DECK DOUBLESCREEN FEATURES & BENEFITS Rev 1 09-01-15 Feed hopper Tipping grid Screenbox Main conveyor Engine Tracks Dimensions Standard features Options Benefits overview 2 FEED CONVEYOR 1200mm
Powerscreen Chieftain 2100X
Powerscreen Chieftain 2100X 3 Deck Incline Screen Specification - Rev X. 8. 16/05/2011 01/01/2015 Specification 14ft Hopper (with grid) track 14ft Hopper (with DDVG) track Total weight 37,400kg (82,453lbs)*
A TEREX BRAND. Technical Specification. COLT 800 SCREEN 2 Deck Incline Screen
A TEREX BRAND Technical Specification COLT 800 SCREEN 2 Deck Incline Screen SPECIFICATION Total weight: 16,700Kg (36,817lbs) depending on machine specification TRANSPORT Length: 9.22m (30 3 ) Width: 2.5m
Powerscreen Chieftain 1700S 3 Deck Incline Screen. Specification - Rev 5. 01/01/2013
Powerscreen Chieftain 1700S 3 Deck Incline Screen Specification 14ft Hopper (with grid) wheel 14ft Hopper (with grid) track Total weight 27,500kgs (60,627lbs)* 29,800kg (65,698lbs)* Transport Length 16.81m
QS441 CONE CRUSHER FEATURES & BENEFITS. Rev
CONE CRUSHER FEATURES & BENEFITS Rev 1 23-12-14 Hopper Feeder Crusher Main conveyor Powerpack Controls Tracks Dimensions Options Benefits overview 2 HOPPER DOORS Heavy duty fixed hopper design enables
Powerscreen H Deck Horizontal Screen. Specification- Rev /01/2017
3 Deck Horizontal Screen Specification- Rev 10. 01/01/2017 Specification Belt Feeder Total weight 46,700kg (102,955lbs)* Transport Length 19.6m (64 3 ) Width 3.2m (10 6 ) Height 3.6m (11 10 ) Working Length
694+ Supertrak 694+ SPECIFICATION:
R Supertrak SPECIFICATION: Screen Size: 6100mm x 1530mm (20 x 5 ) Top, Middle & Bottom deck screenbox Net Engine Power: Tier 3 / Stage IIIA: Caterpillar C4.4 97kW (130hp) Tier 4i / Stage IIIB: Caterpillar
QS331 CONE CRUSHER FEATURES & BENEFITS. Rev
CONE CRUSHER FEATURES & BENEFITS Rev 1 23-12-14 Hopper Feeder Crusher Main conveyor Powerpack Controls Tracks Dimensions Options Benefits overview 2 HOPPER DOORS Heavy duty hopper sides 5m³ / 6.5yd³ nominal
QH331 CONE CRUSHER FEATURES & BENEFITS. Rev Rev
CONE CRUSHER FEATURES & BENEFITS Rev 2 23-03-15 Rev 1 01-12-14 Hopper Feeder Crusher Main conveyor Powerpack Controls Tracks Dimensions Standard features Options Benefits overview 2 HOPPER DOORS Heavy
Powerscreen Warrior Deck Heavy Duty Incline Screen. Specification - Rev /01/2017
Powerscreen Warrior 2400 2 Deck Heavy Duty Incline Screen Specification Three Way Split Two Way Split Total weight 46,200kg ( 101,853lbs)* 43,000kg (94,779 lbs)* Transport Length 17.3m (56 10 ) 17.2m (56
Product presentation. Lokotrack ST3.8 mobile screen
Product presentation Lokotrack ST3.8 mobile screen 1 Metso Minerals ST3.8 Product Presentation ST458 product presentation ST3.8 Technical specifications - Transport dimensions Dimension Metric English
Powerscreen 1500 Maxtrak
Powerscreen 1500 Maxtrak Cone Crusher Specification 1500 Maxtrak Total weight 89,000kg (196,211bs) Transport Length 22.0m (72 6 )* Width 3.5m (11 6 )* Height 3.85m (12 8 )* Working Length 23.9m (79 9 )
UJ440I HD JAW CRUSHER FEATURES & BENEFITS. Rev
HD JAW CRUSHER FEATURES & BENEFITS Rev 1 02-12-14 MODELS AVAILABLE Comfort - standard grizzly feeder Trend - pan feeder and live pre screen Classic - standard grizzly feeder and live under screen 2 Hopper
Powerscreen Metrotrak HA
Jaw Crusher Specification Metrotrak HA Total weight 27,800kg (61,288lbs) Transport Length 13.12m (43 ) Width 2.4m (7 10 ) Height 3.3m (10 10 ) Working Length 13.1m (42 9 ) Width 3.87m (12 6 ) with dirt
Uses one power source to run a complete crushing operation and three auxiliary outlets.
Dimensions RDS-20 Easy to move, Simple to operate, Quick to set-up and Ideal for boosting productivity, the RDS-20 unit increases production by up to 20 percent by splitting oversized material to return
I-140 Impact Crusher SPECIFICATION:
R Impact Crusher SPECIFICATION: Rotor Size: Ø1270mm x 1220mm (Ø50 x 48 ) Net Engine Power: Tier 3 / Stage IIIA: Caterpillar C15 C-15 540hp (403kW) Tier 4i / Stage IV: SCANIA DC-13 500Hp (373kW) Portability:
4242SR SPECIFICATION IMPACT CRUSHER APPLICATIONS. Above photograph features a 4242SR fitted with the optional side conveyor and magnet
Above photograph features a 4242SR fitted with the optional side conveyor and magnet IMPACT CRUSHER Crusher type: Feed opening: Rotor Rotor Diameter: Crusher frame: Rotor: Blowbars: Impact aprons: Engine
Powerscreen 1000SR. Cone Crusher. SPECIFICATION - Rev
Cone Crusher Specification Total weight 1000SR 38,500kg (84,900lbs) Transport Length 16.9m (55 5 ) Width 3.1m (10 2 ) Height 3.45m (11 4 ) Working Length 16.9m (55 5 ) Crusher type: Powerunit: Width 3.1m
Powerscreen Metrotrak HA
Jaw Crusher Specification Metrotrak HA Total weight Tier 3: 28,100kg (61,949lbs) Tier 4F: 29,250kg (64,485lbs) Transport Length 13.1m (43 ) Width 2.4m (7 10 ) Height 3.3m (10 10 ) Working Length 13.1m
Powerscreen 1300 Maxtrak Cone Crusher
Cone Crusher Specification 1300 Maxtrak Total weight Tier 3: 48,020kg (105,865lbs) (No Options) Tier 4F: 47,880kg (105,557lbs) (No Options) Transport Length 15.35m (50 4 ) Width 3.0m (9 10 ) Height 3.85m
M 1700 WASHPLANT SYSTEMS WASHING TECHNICAL SPECIFICATION FEATURES. Fully mobile washing plant. On board hydraulically folding side conveyors
WASHING SYSTEMS TECHNICAL SPECIFICATION M 1700 WASHPLANT FEATURES Fully mobile washing plant On board hydraulically folding side conveyors Capable of producing up to 5 end products Quick set up time Ideally
M 1700 WASHPLANT SYSTEMS WASHING TECHNICAL SPECIFICATION FEATURES. Fully mobile washing plant. On board hydraulically folding side conveyors
WASHING SYSTEMS TECHNICAL SPECIFICATION M 1700 WASHPLANT FEATURES Fully mobile washing plant On board hydraulically folding side conveyors Capable of producing up to 5 end products Quick set up time Ideally
Mobile Crushing and Screening Features and Benefits QH330. Features & Benefits. Sandvik Mining and Construction
Mobile Crushing and Screening Features and Benefits QH330 Features & Benefits Mobile Crushing and Screening Features and Benefits Hopper & Feeder Tipping Grid Vibrating double deck grid option Operated
Powerscreen Commander 1400
2 Deck Incline Screen Specification 14ft Hopper (tipping grid) 14ft Hopper (with DDVG) Total weight 20,200kg (44,440 lbs)* 22,660kg (49,852 lbs)* Transport Length 13.5m (44 3 ) 13.28m (43 7 ) Width 2.72m
428 TRAKPACTOR SPECIFICATION
IMPACT CRUSHER Crusher type: Feed opening: Rotor Width: Rotor Diameter: Crusher frame: Rotor: Blowbars: Impact aprons: Engine pulley: Maximum feed size: Impactor speeds: Lubrication: APPLICATIONS 428 Fixed
428 TRAKPACTOR SPECIFICATION
Above photograph features a 428 Trakpactor fitted with the optional side conveyor and magnet IMPACT CRUSHER Crusher type: Feed opening: Rotor Width: Rotor Diameter: Crusher frame: Rotor: Blowbars: Impact
Powertrack 800 INTRODUCING THE
Powerscreen International. Dist. Ltd. Coalisland Road, Dungannon, Co.Tyrone, N.Ireland BT71 4DR Tel: +44(0) 2887 740701 Fax: +44(0) 2887 746569 Email: mail@powerscreen.co.uk INTRODUCING THE Powertrack
Lokotrack LT200HP. Setting the standards for mobile cone crushing
Lokotrack LT200HP Setting the standards for mobile cone crushing Proven Compact Performance LT200HP has several hundred references from northern arctic conditions to blistering heat of the equator The
CONE CRUSHER CRUSHER OPTIONS MAXIMUM FEED SIZE
CONE CRUSHER Crusher type: Liners: Standard concave: Adjustment: Control: Concave options: Eccentric option: 1000 Automax Crusher fitted with long throw eccentric. Manganese steel alloy mantle and concave.
873 Heavy Duty Screener
R 873 873 Heavy Dty Screener preliminary specification SPECIFICATION: Screen Size: 3660mm x 1530mm (12 x 5 ) Net Engine Power: Tier 3 / Stage IIIA: Caterpillar C4.4 83kW (111.3hp) Tier 3 / Stage IIIA:
WARRIOR 1800 INTRODUCING THE
Powerscreen International. Dist. Ltd. Coalisland Road, Dungannon, Co.Tyrone, N.Ireland BT71 4DR Tel: +44(0) 2887 740701 Fax: +44(0) 2887 746569 Email: mail@powerscreen.co.uk INTRODUCING THE WARRIOR 1800
1412 TRAKPACTOR SPECIFICATION
Above photograph features a 1412 Trakpactor fitted the with optional side conveyor and magnet. IMPACT CRUSHER Crusher type: Rotor Width: Rotor Diameter: Feed opening: Crusher frame: Rotor: Blowbars: Impact
I-130 Impact Crusher
R I-130 I-130 Impact Crusher SPECIFICATION: Rotor Size: Ø1270 x 1219mm Ø50 x 48 Net Engine Power: 328kW 440 HP Portability: Tracked Operating Weight: 49,000 kgs* 108026 lbs* *Note: Without one by-pass
A TEREX BRAND. Technical Specification. COBRA 260R Horizontal Impact Crusher
A TEREX BRAND Technical Specification COBRA 260R Horizontal Impact Crusher PRINCIPAL COMPONENTS OF THE EVOQUIP COBRA IMPACT CRUSHER PRINCIPLES OF OPERATION Material enters via the crusher opening & slides
QJ331 Jaw Crusher Features & Benefits Revision
QJ331 Jaw Crusher Features & Benefits Revision 03 08-09-2014 1 Sandvik Mobiles Hopper Feeder Crusher Main Conveyor Controls Engine Tracks Options Benefits Overview 2 Sandvik Mobiles Hopper 2505mm x 4500mm
Southeast Crush & Screen LLC # Fax #
Southeast Crush & Screen LLC #615-289-9890 Fax # 931-540-0048 www.secrushandscreen.com Transportation Dimensions 14375 [47'-2"] 4140 [13'-7"] Feeding Height 3400 [11'-2"] Transport Height 3330 [10'-11"]
Horizontal Impactor. SPECIFICATION - Rev 1. 19/10/09
Horizontal Impactor SPECIFICATION - Rev 1. 19/10/09 The Powerscreen Pegson XH320 Horizontal Shaft Impactor is a highly compact tracked crusher designed to reinforce a world class range of tracked machines.
The standard ROCK BOX reduces wear on the discharge point by forming crushed material into a natural rock shelf to serve as a liner.
Dimensions TC-20 The TC-20 tracked crusher has the largest hopper in its class and is built for big loads and even bigger production. IROCK s TC-20 produces a uniform, cubical product that will increase
Lokotrack LT106. Mobile jaw crushing plant
Lokotrack LT106 Mobile jaw crushing plant Lokotrack LT106 Groundbreaking Excellence The improved successor to the industry benchmark in mobile crushing takes production capacity to a whole new level, while
Tel: Fax: INTRODUCING THE. Commander 510
Sales & Rentals LLC 11901 Westport Rd, Louisville, KY 40245 Tel:502 326 9300 Fax:502 326 9305 Email:sales@powerscreensales.com INTRODUCING THE FEATURES Total weight Width (transport) 2.47m (8' 1") Length
Technical Specification
Powerscreen International. Dist. Ltd. Coalisland Road, Dungannon, Co.Tyrone, N.Ireland BT71 4DR Tel: +44(0) 2887 740701 Fax: +44(0) 2887 746569 Email: mail@powerscreen.co.uk INTRODUCING THE Powertrack
WARRIOR 1800 JACK UP SCREENBOX
Powerscreen International. Dist. Ltd. Coalisland Road, Dungannon, Co.Tyrone, N.Ireland BT71 4DR Tel: +44(0) 2887 740701 Fax: +44(0) 2887 746569 Email: mail@powerscreen.com INTRODUCING THE WARRIOR 1800
SPECIFICATION SHEET. R9 JAW CRUSHER R-Version
SPECIFICATION SHEET R9 JAW CRUSHER R-Version R9R Jaw Crusher ROCO R9R Jaw Crusher ROCO R9R Jaw Crusher is suitable for use in all quarry, mining, demolition & recycling industries. The mobile crushing
M 1400 WASHPLANT SYSTEMS WASHING TECHNICAL SPECIFICATION FEATURES. Fully mobile washing plant. On board hydraulically folding side conveyors
WASHING SYSTEMS TECHNICAL SPECIFICATION M 1400 WASHPLANT FEATURES Fully mobile washing plant On board hydraulically folding side conveyors Capable of producing up to 4 end products Quick set up time Ideally
133x152 TWO PRODUCT RAMBLER. 133x152 TRACK MOUNTED IMPACT CRUSHER. Two Bars Per Row. 150mm x 320mm Bearing With Big Cast Base. Each Hammer lbs.
Construction Equipment Co. 2 5 1 x 3 3 1 Feeder Size 58 x 18 CAT 600hp Impactor 133x152 Track Mobile Impactor Features Heavy Duty Rotor 4 x 8 Backing Bar With Replaceable Seats 14 Steel Rotor Core Dual
Powerscreen Trakpactor 260
Powerscreen Trakpactor 260 Horizontal Impactor Powerscreen Trakpactor 260 Specification Total weight Trakpactor 260 Standard 27,000kg (59,525lbs) including side conveyor and magnet Transport Length 13.40m
OVERVIEW SCREEN MACHINE INDUSTRIES, INC.
OVERVIEW Screen Machine Industries is a global leader in crushing and screening equipment with manufacturing headquarters located in Columbus, Ohio, USA. Directionally reversible, 42 wide conveyor with
FLYWHEEL HORSEPOWER 228 kw rpm OPERATING WEIGHT kg 84,440 lb MOBILE CRUSHER. Photos may include optional equipment.
FLYWHEEL HORSEPOWER 228 kw 306 HP @ 1950 rpm OPERATING WEIGHT 38300 kg 84,440 lb MOBILE CRUSHER Photos may include optional equipment. BR480RG-1 Mobile Crusher WALK-AROUND Komatsu s newly designed BR480RG-1
HIGH TORQUE SHREDDERS TERMINATOR & CRAMBO
HIGH TORQUE SHREDDERS TERMINATOR & CRAMBO TERMINATOR SINGLE SHAFT SHREDDER Tires Mattresses & Bulky Waste Carpet MSW Heavy C&D White Goods F for a wide range of use The F drum has two spiral rows of left
INCLINED SCREEN SPECIFICATIONS: Screen Size: Net Engine Power: Tier 3 / Stage 3A: CAT (4.4 ATAAC) Portability:
R 674 674 INCLINED SCREEN SPECIFICATIONS: Screen Size: Net Engine Power: Tier 3 / Stage 3A: CAT (4.4 ATAAC) Engine Power: 98.1kW (131hp) Tier 4F / Stage IV: CAT (4.4 ATAAC) Engine Power: 82kW (110hp) Tier
COMPACT CRUSHER RUBBLE MASTER RM70 GO!
COMPACT CRUSHER RUBBLE MASTER RM70 GO! Feed material: Rubble, concrete, asphalt, brick Reinforced steel up to a diameter of 12 mm, assumed that it is completely embedded in the material and you use green
BR500JG-1A BR500JG-1A MOBILE CRUSHER BR500JG-1A WITH VIBRATORY GRIZZLY FEEDER
BR500JG-1A WITH VIBRATORY GRIZZLY FEEDER FLYWHEEL HORSEPOWER 228 kw 310 HP @ 1950 rpm OPERATING WEIGHT 57153 kg 126,000 lb BR500JG-1A BR500JG-1A MOBILE CRUSHER BR500JG-1A Mobile Crusher WALK-AROUND With
694+ Dual Power Supertrak
R 694+ 694+ Dal Power Spertrak SPECIFICATION: Screen Size: 6100mm x 1530mm (20 x 5 ) Top, Middle & Bottom deck screenbox Net Engine Power: Tier 3 / Stage IIIA: Caterpillar C4.4 130hp (97kW) Tier 4i / Stage
Cold milling machine W 1200 F. Technical specification
Cold milling machine W 1200 F Technical specification Technical specification Cold milling machine Cold milling machine W 1200 F on four wheels W 1200 F on four crawler tracks Milling width max. 3 11 1,200
Powerscreen Premiertrak 400 / R400 Pre-Screen Jaw Crusher. SPECIFICATION - Rev 2. 01/01/2015
Jaw Crusher SPECIFICATION - Rev 2. 01/01/2015 Specification 400 Pre-Screen R400 Pre-Screen Total weight 48,220kg (106,306lbs)* 48,420kg (106,747lbs)* Transport Length 15.4m (50 6 ) 15.4m (50 6 ) Width
Supertrak SPECIFICATION:
R 683 683 Spertrak SPECIFICATION: Screen Size: 3660mm x 1520mm (12 x 5 ) Net Engine Power: Tier 3 / Stage IIIA: Caterpillar C4.4 111.3hp (83kW) Tier 4i / Stage IIIB: Caterpillar C4.4-110hp (82kW) Portability:
UI310+ IMPACT CRUSHER FEATURES & BENEFITS. Rev Rev
IMPACT CRUSHER FEATURES & BENEFITS Rev 0 30-09-16 Rev 2 09-04-15 Introduction Applications Impact crusher Feeder and hopper Wheel mounted High capacity operation Safety features Control Dimensions Standard
Lokotrack LT120 Mobile jaw crushing plant
Lokotrack LT120 Mobile jaw crushing plant LOKOTRACK LT120 LOKOTRACK LT120 Lokotrack LT120 Next Level of Crushing Lokotrack LT120 is the latest and most advanced of Metso s track-mounted jaw crusher plants.
Mobile Crushing and Screening Features and Benefits QH330. Features & Benefits. Sandvik Mining and Construction
Mobile Crushing and Screening Features and Benefits QH330 Features & Benefits Mobile Crushing and Screening Features and Benefits Hopper & Feed Conveyor Hopper Doors Heavy duty hopper sides Box section
6 SERIES MOBILE DECK DECK INCLINED SCREENS
6 SERIES MOBILE 663 683 684 2-DECK 684 3-DECK 693+ 694+ INCLINED SCREENS 663 Finlay 663 combines the functions of scalping, screening and stockpiling into the one integrated mobile unit. Its rugged design
SANDVIK CR320 FEEDER BREAKER
SANDVIK CR320 FEEDER BREAKER TECHNICAL SPECIFICATION The Sandvik feeder breaker CR320 is a robust, modular machine designed for heavy duty underground coal mine operations. The machine is suitable for
Trenchers for Drainage works
Main Technical Specifications s for Drainage works MODEL GROSS POWER ENGINE WEIGHT RANGE ROCKSAW CHAINSAW BUCKET WHEEL ROCK HAWG 775DT 5 hp (168 kw) Caterpillar C6.6 ACERT 34,171-55,000 lbs (15.500-24.947
CONTROL. No. of shoes on each side No. of carrier roller on each side No. of track roller on each side No. of rail guard on each side.
SPECIFICATIONS ENGINE Maker / Model Type Rated flywheel horse power SAE DIN Perkins 1204F Water-cooled, 4-cycle diesel, 4-cylinder inline, Direct injection, Turbocharged, Charge and air cooled J1995 (gross)
R R J-1480 JAW CRUSHER
R R J-1480 JAW CRUSHER Power, Performance & Profitability... Introducing the new J-1480 the largest Jaw Crusher in the Terex Finlay crushing range. The J-1480 is fitted with a Terex Jaques 1370mm x 762mm
1) Project Description: -
1) Project Description: - Bulk material, will be transported to the Stockpile area by the clients conveyor system and then discharged direct to a stockpile with a height of up to typically 15.0 m. (Client
R R J-1175 JAW CRUSHER
R R J-1175 JAW CRUSHER Efficiency, Versatility Performance... The Terex Finlay J-1175 is fitted with a 1070mm x 760mm (42" x 30") Jaques crusher chamber and a heavy-duty undercarriage for exceptional on
superiority RM V550G0! quality crushing New applications through flexibility and mobility. V550GO!
EN superiority RM V5G! quality crushing New applications through flexibility and mobility. V5GO! A B highlights The technical Highlights % mobility The transport as well the start up and dismounting are
CRC450X PORTABLE CONE PLANT
Terex Minerals Processing Systems Cedarapids CRC450X CRC450X PORTABLE CONE PLANT Unit shown with the following options: right-hand feed conveyor; 45' (13,716 mm) undercrusher conveyor; oversized quick
With Tier 4 Interim Engine installed HYUNDAI HEAVY INDUSTRIES
With Tier 4 Interim Engine installed HYUNDAI HEAVY INDUSTRIES 1 Specifications R145LCR-9A ENGINE MODEL Type PERKINS 1204E Water cooled, 4 cycle Diesel, 4-Cylinders in line, direct injection, turbocharged,
SOUTHEAST CRUSH & SCREEN LLC
SOUTHEAST CRUSH & SCREEN LLC 615-289-9890 WWW.SECRUSHANDSCREEN.COM SPECIFICATIONS 640 MOBILE SCALPING SCREEN General The is a heavy duty scalping screen designed to work in tandem with our Fintec 1107
PRODUCT SPECIFICATION TRS 550 RECYCLING SCREEN.
PRODUCT SPECIFICATION TRS 550 RECYCLING SCREEN www.terex.com/ecotec THE ULTIMATE RECYCLING SCREEN The TRS 550 is the ultimate screening machine for difficult applications. The robust 3 way split machine
Powerscreen Premiertrak 400 & R400. Jaw Crusher. SPECIFICATION - Rev 6. 01/01/2015
Jaw Crusher SPECIFICATION - Rev 6. 01/01/2015 Specification Premiertrak 400 Total weight 45,260kg (99,781lbs) including magnet & side conveyor Transport Length 15.2m (49 10 ) Width 2.8m (9 2 ), 4.3m (14
Lokotrack ST2.4. Quality delivers Precision. Metso
Lokotrack ST2.4 Quality delivers Precision Next Level of Screening, New Lokotrack ST2.4 Productivity Reliability Fuel efficiency Safety 3D kuva 2 Introducing a New ST2.4 into the Mobile Screen Product
Powerscreen Trakpactor 320SR Horizontal Impactor. Specification - Rev 6. 01/01/2017
Horizontal Impactor Specification - Rev 6. 01/01/2017 Specification Trakpactor 320SR Total weight VGF 46,240kg (101,941lbs)* Total weight PS 48,600kg (107,144lbs)* Transport Length 17.58m (57 8 )* Width
NET HORSEPOWER 134 kw rpm OPERATING WEIGHT kg 69,450 lb BR380JG-1 BR 380 JG MOBILE CRUSHER. Photos may include optional equipment.
NET HORSEPOWER 134 kw 180 HP @ 2050 rpm OPERATING WEIGHT 31600 kg 69,450 lb BR 380 JG MOBILE CRUSHER Photos may include optional equipment. M OBILE C RUSHER WALK-AROUND The newly designed Komatsu mobile
General Dimensions and Weights. 150" 381 cm. 198" cm. 480 lbs kg. 560 lbs 254 kg. 49 and 85 hp (36.54 and kw) Engine Option One
Home > Equipment > Brush Chippers > BC1000XL BC1000XL Specs General Dimensions and Weights Length - Feed Table Up, Tongue In Length - Table Down, Tongue Extended 150" 381 cm 198" 502.9 cm Width 66.5" 168.9
M325B MH Wheeled Material Handler
M2B MH Wheeled Material Handler Engine Engine Model 11 TA Net Flywheel Power 12 kw 18 hp Operating Specifications Maximum Reach. m.9 ft Cat Cab Riser 1.9 m.4 ft Weights Operating Weight 7 2 kg 82,4 lb
Product description Mobile track mounted HYBRID impact crusher R1100DE
FU SAVE S BOO T PE EL MA RFOR NCE Product description Mobile track mounted HYBRID impact crusher R1100DE e e Kormann Rockster Recycler GmbH - Wirtschaftszeile West 2, 4482 Ennsdorf, Austria Tel.: +43 (7223)
HORIZONTAL SHAFT IMPACTOR XH250 SPECIFICATION XH250/208
HORIZONTAL SHAFT IMPACTOR XH250 SPECIFICATION XH250/208 XH250 SPECIFICATION - OVERVIEW The TEREX Pegson XH250 Horizontal Shaft Impactor is a highly compact tracked crusher designed to reinforce a world
INTRODUCING THE XA400 SPECIFICATION XA400/206
INTRODUCING THE XA400 SPECIFICATION XA400/206 FEATURES The new Terex Pegson XA400 is the most modern plant of its type and is packed with new user friendly features. The very high performance of this new
Technical specification Cold milling machine W 2200
Technical specification Cold milling machine W 2200 Technical specification Cold milling machine W 2200 Milling width max. Milling depth * 1 7 3 (2,200 mm) 0 14 (0 350 mm) Milling drum Tool spacing 15
Compact recycler RUBBLE MASTER RM 80GO!
Compact recycler RUBBLE MASTER RM 80GO! USPs: Average throughput up to 200 to/hr 20-30% more daily capacity thanks to high throughput continuity through automatic feeding Impact elements with newly developed
Powerscreen Premiertrak 600. Jaw Crusher. SPECIFICATION - Rev 2. 01/01/2017
Jaw Crusher SPECIFICATION - Rev 2. 01/01/2017 Specification Premiertrak 600 Total weight 68,875kg (151,843lbs) including magnet & dirt conveyor. Transport Length 17.1m (56 1 ) Width 3.0m (9 10 ) Height
Barford SR124 Screener Barford SR124 Screener Visit our website for full inventory
WWW.BARFORD.COM Barford SR124 Screener Barford SR124 Screener Barford SR124 Heavy Duty 3 Way Split Screen, 12 x 4 2 (3.66m x 1.28m) Screenbox, CAT 4.4 (56kw/75hp), Remote Control Movement, Fits in 40Ft
POWERSCREEN SCREENING RANGE
POWERSCREEN SCREENING RANGE KNOWLEDGE IS POWER POWERSCREEN SCREENING PRODUCT RANGE Powerscreen means different things to different people. For some, it means robust and reliable crushing and screening