Cold Recycler WR Large working width and cutting-edge technology for economical cold recycling
|
|
- Benedict Goodman
- 5 years ago
- Views:
Transcription
1 Cold Recycler WR 4200 Large working width and cutting-edge technology for economical cold recycling
2 Recycling and paving carriageways true to cross-section, line and level, all in a single pass Building experience Wirtgen has accumulated working together with clients around the globe, the cold recycler WR 4200 was developed as the successor model of the WR 4500 in Extensive knowledge in application technology plus the latest breakthroughs in mechanical and control engineering were channelled into the newly designed unit. The main field of application of the WR 4200 is the rapid and economical rehabilitation of defective roads, as the unit can process carriageway pavements up to a width of 4.20 m into high quality base courses in a single pass. The machine granulates the carriageway pavement and mixes water, hydraulic binder, bitumen emulsion or foamed bitumen thoroughly with the reclaimed granulated material. The integrated tamping screed then lays the prepared paving material true to cross-section, line and level and compacts it. The result: a base course, which can be re-opened to traffic following final compaction with rollers. Many of the features of the new WR 4200 ensure that the material is optimally prepared and forms a durably cohesive road structure: The large working width of up to 4.20 m means that complete carriageways for one can be rehabilitated in a single pass without joints and true to cross-section, line and level. The working width is infinitely adjustable, even while the work is in process. A produces a homogenous mixture from granulated pavement and additional materials. The WR 4200 can attain a maximum mixing performance of 400 t/h while maintaining a mixing quality which meets that of conventional mixing plants. The new course must only be compacted with rollers after the pass and is then immediately ready for the resumption of traffic. This makes for a minimal obstruction to traffic. Injection system for bitumen emulsion Injection system for water Water tank Generator for the hot bitumen system Drive unit with two diesel engines Hydraulic oil tank Diesel tank Injection system for foamed bitumen milling drum Injection system for cement-water slurry Two variable tamping screed Vögele AB 500 TV Schematic diagram of the components of the WR The output of the travel drives is dimensioned so as to ensure that the recycler can also easily push connected vehicles such as the slurry mixing plant WM 1000 and a bitumen tank trailer. 2
3 Advanced technology for all cold recycling applications Illustration of the variable working width of the WR 4200: the position of the two front is infinitely variable. The mixes the entire milled material thoroughly with the binders, whatever the working width. The screed then pre-compacts the material. The cold recycler WR 4200 has much to commend it. First, there is its powerful drive: two forceful engines drive the hydraulic pumps of the machine. The largest portion of the engine output is required to drive the. While the front drums operate according to the cut-down milling process, the rear drum operates in an up-milling. This combination results in the optimum grain size of the milled material. The milling depth ranges up to 200 mm. If the carriageway is pre-milled with separate cold milling machines, the mixer and screed can even process and place the pavement up to a depth of 300 mm. Binder and / or water are injected to the milled granulate in the, precisely metered according to the required proportions. And the result: a homogenous, high quality. A cuttingedge electrically heated Vögele screed AB 500 TV with integrated automatic level control then places the mixture true to cross-section, line and level and pre-compacts the new base course. The electrically heated foamed bitumen system is another advantage of the WR The heating maintains the hot bitumen at the right temperature in the entire system, in order to optimally stabilize the temperature for the production of foamed bitumen. The PLC (programmable logic controller) ensures that all subprocesses in the WR 4200 are linked intelligently. Its microprocessors monitor the process parameters and control the addition of binders according to the proportions, advance speed and working depth set. The tried-and-tested Wirtgen automatic levelling system helps the PLC keep to the desired working depth. The recycler is simple to operate, for all its technical sophistication. Clearly labelled operating elements operator s platform and easily accessible panels and screed make operation a simple task and ensure the economical use of this high-performance recycler. 3
4 Cold recycling of carriageways with cement Variant: Spreading of cement ahead of the machine; injection of water in metered quantities via the WR 4200 water tanker truck pump for the injection of water Spreading of cement ahead of the machine Spreading of cement ahead of the machine Injection of water mixing in, paving and Variant: Cement and water is pre-mixed by the slurry mixer WM 1000 and injected by means of the WR 4200 to the slurry mixer WM 1000 pump of the WM 1000 for the injection of the cementwater slurry WM 1000: pre-mixing and infeed of slurry admixing, paving and Above: Cement is spread ahead of the machine and water from the tanker truck is sprayed into the twin-shaft via the injection system. Below: The WM 1000 produces a slurry of cement and water and supplies it to the twin-shaft of the WR 4200 in metered quantities. 4
5 Cold recycling of carriageways with bitumen emulsion Variant: Metered injection of water and bitumen emulsion via the WR 4200 water tanker truck Microprocessorcontrolled pump for the injection of water pump for the injection of emulsion emulsion tanker Infeed of water Infeed of emulsion mixing in, paving and Variant: Injection of bitumen emulsion and cement-water slurry via separate spray nozzles emulsion tanker pump for the injection of emulsion pump of the WM 1000 for the injection of the cementwater slurry slurry mixer WM 1000 Infeed of emulsion WM 1000: mixing and infeed of slurry mixing in, paving and Above: The injection units convey water and emulsion to the twin-shaft. Below: The injection unit conveys the emulsion from the tanker to the twin-shaft ; the WM 1000 delivers metered quantities of pre-mixed cement-water slurry. 5
6 Cold recycling of carriageways with foamed bitumen Variant: Metered injection of foamed bitumen and water via the WR 4200 bitumen truck Microprocessorcontrolled pump for the addition of hot bitumen pump for the injection of water for compaction water tanker truck pump for the injection of water for foam production Infeed of water Infeed of bitumen admixing, paving and Variant: Metered injection of foamed bitumen; Cement and water is pre-mixed and injected by the slurry mixer WM 1000 pump for the addition of hot bitumen bitumen truck pump for the injection of water for foam production pump of the WM 1000 for the injection of the cementwater slurry slurry mixer WM 1000 Infeed of bitumen WM 1000: mixing and infeed of slurry admixing, paving and Above: The injection units convey water and hot bitumen from the tanker trucks to the twin-shaft. Water is added from the machine tank for the production of foamed bitumen. Below: The WM 1000 meters the slurry in the twin-shaft. 6
7 Technical Data Cold Recycler WR 4200 Dimensions in mm 3,000 2,050 6,000 1,290 3,075 12,415 width mm 2,800 4,200 depth mm Milling depth mm max. 200 Spacing mm 20 Number of cutters 76 each Diameter of cutting circle mm 1,000 Spacing mm 20 Number of cutters 142 Diameter of cutting circle mm 1,000 Engines Manufacturer CAT Type 2 x C 16 ATAAC Cooling Water Number of cylinders 2 x 6 R Output kw/ HP/ PS 2x (470/ 630/ 640) Revolutions min -1 2,100 Displacement cm 3 2 x 15,800 Fuel consumption at full load l/h 2 x 115 Fuel consumption at 2 /3-load l/h 2 x 75 Electrical installation V 24/ 42/ 380 Dimensions (LxWxH) mm 3,200 x 2,000 x 1,150 Mixing performance m 3 /min 4 Travelling properties speed m/min 0 16 Travelling speed km/h Gradeability in working mode % 45 Gradeability in travel mode % 15 Ground clearance mm 700 Crawler tracks (LxWxH) mm 2,550 x 500 x 800 Weights Operating weight, CE dan (kg) approx. 80,000 Filling quantities Fuel l 2,070 Hydraulic oil l 1,600 Water l 2,900 Type Vögele AB 500 TV Paving width mm 2,500 5,000 Crowning device, max. % 4 Transport dimensions Machine (LxWxH) mm 12,200 x 3,000 x 3,000 7
8 Wirtgen GmbH Hohner Strasse Windhagen Germany Phone: +49 (0) /131-0 Fax: +49 (0) / Internet: Illustrations are without obligation. Subject to technical changes. Performance data depend on operational conditions. No EN-06/02 by Wirtgen GmbH 2002 Printed in Germany
Technical specification
Technische Technical specifi Daten cation Kaltfräse Cold Recycler W 200 WR 4200 Technical specification Cold Recycler WR 4200 Working width 3,000 4,200 mm Milling width 2,800 4,200 mm Working depth 0 200
More informationTechnical specification. Recycler WR 2400
Technical specification Recycler WR 2400 Technical specification Working width (max.) Working depth * 1 Milling and mixing rotor Tool spacing Recycler WR 2400 2,400 mm 0 500 mm 20 mm Number of tools 186
More informationTechnical specification. Electric cold milling machine W 350 E
Technical specification Electric cold milling machine W 350 E Technical specification Milling width max. Milling depth* 1 Milling drum Tool spacing Electric cold milling machine W 350 E 350 mm 0 100 mm
More informationTechnical specification. Cold Milling Machine W 1900
Technical specification Cold Milling Machine W 1900 Technical specification Cold milling machine W 1900 Milling width Milling depth * 1 2,000 mm 0 320 mm Milling drum Tool spacing 15 mm Number of tools
More informationWR series. WR 200 WR 200 i WR 240 WR 240 i WR 250
Technische Technical specification Daten Kaltfräse Cold Recycler W 200 and Soil Stabilizer WR series WR 200 WR 200 i WR 240 WR 240 i WR 250 Technical specifi cation WR 200 Cold recycler and soil stabilizer
More informationTechnical specification. Cold milling machine W 100
Technical specification Cold milling machine W 100 Technical specification Cold milling machine W 100 Milling width max. 1,000 mm Milling depth* 1 0 300 mm Milling drum Tool spacing 15 mm Number of tools
More informationTechnical specification. Stabilizer WR 2000 XL
Technical specification Stabilizer WR 2000 XL Technical specification Working width max. Working depth * 1 Milling and mixing rotor Tool spacing Stabilizer WR 2000 XL 7 10 (2,400 mm) 0 20 (0 500 mm) 13
More informationThe complete product range. Tailor made products to meet your requirements
The complete product range. Tailor made products to meet your requirements 02 03 WIRTGEN where innovation happens What began as a haulage company for construction materials in 1961 has developed, over
More informationCold milling machines W 1000 F and W 1200 F. The flexible ones in the 1-metre class
Cold milling machines W 1000 F and W 1200 F The flexible ones in the 1-metre class Cold milling machines W 1000 F and W 1200 F: the flexible ones in the 1-metre class The W 1000 F and W 1200 F have proved
More informationTechnical specification. Cold milling machine W 35
Technical specification Cold milling machine W 35 Technical specification Milling width max. Milling depth * 1 Milling drum Tool spacing Cold milling machine W 35 14 350 mm 0 2 0 60 mm 1 /2 12 mm Number
More informationTechnical specification. Cold milling machine W 2100
Technical specification Cold milling machine W 2100 Technical specification Cold milling machine W 2100 Milling width max. Milling depth * 1 2,200 mm 0 320 mm Milling drum Tool spacing 15 mm Number of
More informationTechnical specification. Cold Milling Machine W 100 F, W 120 F, W 130 F
Technical specification Cold Milling Machine W 100 F, W 120 F, W 130 F Technical specification W 100 F W 120 F W 130 F Milling width 1,000 mm 1,200 mm 1,300 mm Milling depth * 1 0 mm Milling drum Tool
More informationHamm Soil Stabilizer Raco 350. Technical specification
Hamm Soil Stabilizer Raco 350 Technical specification Technical specification 2 Hamm Soil Stabilizer Raco 350 Working width max. mm 2,400 Working depth* 1 mm 0 450 Milling and mixing drum Tool spacing
More informationPerforming to the highest quality standards. Cold Recycler and Soil Stabilizer WR 200 XL i
Performing to the highest quality standards. Cold Recycler and Soil Stabilizer WR 200 XL i 02 03 Outstanding features of the WR 200 XL i cold recycler / soil stabilizer 2 AUTOMATED FEATURES FOR EFFICIENT
More informationCold milling machine W 1200 F. Technical specification
Cold milling machine W 1200 F Technical specification Technical specification Cold milling machine Cold milling machine W 1200 F on four wheels W 1200 F on four crawler tracks Milling width max. 3 11 1,200
More informationTechnical specifi cation Cold Milling Machine W 220
Technical specifi cation Cold Milling Machine W 220 Technical specification Cold milling machine W 220 Milling drum Standard FB 2,200 Option FB 2,500 Milling width 2,200 mm 2,500 mm Milling depth * 1 0-350
More informationThe new generation Cold Recycler and Soil Stabilizer WR series. WR 200 WR 200 i WR 240 WR 240 i WR 250
The new generation Cold Recycler and Soil Stabilizer WR series WR 200 WR 200 i WR 240 WR 240 i WR 250 Contents Added value that pays dividends... 4 Three machines world class to the power of three... 6
More informationTechnical specification
Technische Technical specification Daten Kaltfräse Cold milling W 200 machine W 50 Technical specification Milling width max. Milling depth * 1 Cold milling machine W 50 500 mm 0 160 mm Milling drum Tool
More informationKaltfräse Cold milling W 200 machine W 100 / W 100i
Technische Technical specifi Daten cation Kaltfräse Cold milling W 200 machine W 100 / W 100i Technical specification Cold milling machine W 100 und W 100i Milling drum Milling width 1,000 mm Milling depth
More informationAdvanced Cold milling machine for economical applications. Cold Milling Machine W 195
Advanced Cold milling machine for economical applications. Cold Milling Machine W 195 02 03 TWO-METRE FRONT LOADER IN TRIED-AND-TESTED DESIGN FOR EFFICIENT MILLING OPERATIONS. THE MACHINE IS SUITABLE FOR
More informationTechnical specification Slipform Pavers Model Series SP 80. SP 81 SP 81 i SP 82 SP 82 i SP 84 SP 84 i
Technical specification Slipform Pavers Model Series SP 80 SP 81 SP 81 i SP 82 SP 82 i SP 84 SP 84 i SP 81 SP 81 i Slipform paver of the SP 80 model series in offset configuration Slipform pavers SP 81
More informationTechnical specification Cold Milling Machine W 210 / W 210 i
Technical specification Cold Milling Machine W 210 / W 210 i Technical specification Cold milling machine W 210 and W 210 i Milling drum Option FB 1,500 Standard FB 2,000 Option FB 2,200 Milling width
More informationTechnical specification
Technische Technical specification Daten Kaltfräse Cold Milling W 200 Machine W 210 / W 210i Technical specification Cold milling machine W 210 and W 210i Milling drum Option FB 1,500 Standard FB 2,000
More informationPowerful, compact cold milling machine in the half-metre class. Cold Milling Machine W 50 H
Powerful, compact cold milling machine in the half-metre class. Cold Milling Machine W 50 H 02 03 At a glance: the highlights of the new W 50 H Highlights in operation (pages 4 / 5) 1 HIGH PRECISION LEVELLING
More informationTechnical specification Cold milling machine W 2200
Technical specification Cold milling machine W 2200 Technical specification Cold milling machine W 2200 Milling width max. Milling depth * 1 7 3 (2,200 mm) 0 14 (0 350 mm) Milling drum Tool spacing 15
More informationTechnical specification
Technische Technical specifi Daten cation Kaltfräse Surface Miner W 200 2500 SM Technical specification Surface miner 2500 SM Cutting drum Cutting width, max. 2,500 mm Cutting depth * 0 600 mm Number of
More informationHomogeneous distribution of concrete fed from the side. Side Feeder ISF 94 / ISF 94 i
Homogeneous distribution of concrete fed from the side. Side Feeder ISF 94 / ISF 94 i 02 03 Outstanding features of the ISF 94 / ISF 94 i side feeder 3 PIVOTING LEGS Four pivoting legs to adjust the track
More informationPowerful, compact cold milling machine in the half-metre class. Cold Milling Machine W 50 H / W 55 H
Powerful, compact cold milling machine in the half-metre class. Cold Milling Machine W 50 H / W 55 H 02 03 At a glance: the highlights of the new W 50 H and W 55 H Highlights in operation (pages 4 / 5)
More informationOptimal structure and protection of concrete surfaces Texture curing machine TCM 950 / TCM 1800
Optimal structure and protection of concrete surfaces Texture curing machine TCM 950 / TCM 1800 High-quality curing of freshly paved concrete slabs Anti-skid surfaces and optimal hardening processes Components
More informationTechnical specifi cation Cold Milling Machine W 220
Technical specifi cation Cold Milling Machine W 220 Technical specification Cold milling machine W 220 Milling drum Standard FB 2,200 Option FB 2,500 Milling width 7 3 2,200 mm 8 2 2,500 mm Milling depth
More informationThe powerful unit for effective soil stabilization. Tractor-towed stabilizer WS 220 and WS 250
The powerful unit for effective soil stabilization. Tractor-towed stabilizer WS 220 and WS 250 02 03 Outstanding features of the WS 220 and WS 250 tractor-towed stabilizer 3 THREE-POINT HITCH Standardized
More informationDELIVERY RANGE North America
DELIVERY RANGE North America Contents WIRTGEN GROUP OVERVIEW 04 Well rounded 04 A strong partner you can rely on 06 Right where you need us 08 WIRTGEN DELIVERY RANGE 10 Cold Milling Machines 11 Cold Recyclers
More informationThe powerful unit for effective soil stabilization Tractor-towed stabilizer WS 220 and WS 250
The powerful unit for effective soil stabilization Tractor-towed stabilizer WS 220 and WS 250 Boost up your tractor to become a stabilizing pro Flawless mixing results and perfect levelling are the hallmarks
More informationRoad Stabilizer. Improved Safety Four safe braking systems are provided as standard equipment Slim engine hood for a clear view Wide operator s deck
PM550 PM550-s Road Maintenance Machine & Others Road Stabilizer Innovative newly-designed road stabilizer PM550(-s) for full depth reclamation (FDR) and soil stabilization. It makes jobs environmentally-friendly
More informationWIRTGEN GROUP ORIGINAL SPARE PARTS
CLOSE TO OUR CUSTOMERS WIRTGEN GROUP ORIGINAL SPARE PARTS Special campaign 2017 / 2018 CAMPAIGN PERIOD 01/11/2017 until 31/03/2018 WIRTGEN GROUP I PARTS SPECIAL CAMPAIGN ORIGINAL WIRTGEN GROUP PARTS SPECIAL
More informationLeading through passion Cold Milling Machine W 35 Ri
Leading through passion Cold Milling Machine W 35 Ri At a glance: the highlights of the new W 35 R i HIGHLIGHTS IN OPERATION Variable operator s platform Ergonomic multifunctional armrest Simple, intuitive
More informationZero-emission, electrically driven small milling machine. Cold Milling Machine W 350 E
Zero-emission, electrically driven small milling machine Cold Milling Machine W 350 E Milling with almost zero emissions Clean air guaranteed by zero-emission electric drive In many buildings of the food
More informationTechnical specification Cold Milling Machine W 210 / W 210 i
Technical specification Cold Milling Machine W 210 / W 210 i Technical specification Cold milling machine W 210 and W 210 i Milling drum Option FB 1,500 Standard FB 2,000 Option FB 2,200 Milling width
More informationPerfect texture and protection for concrete surfaces. Texture Curing Machine TCM 95 TCM 95 i TCM 180 TCM 180 i
Perfect texture and protection for concrete surfaces. Texture Curing Machine TCM 95 TCM 95 i TCM 180 TCM 180 i 02 03 At a glance: outstanding features of the new texture curing machine Highlights in operation
More informationTechnical specification Cold Milling Machine W 250 i
Technical specification Cold Milling Machine W 250 i Technical specification Cold milling machine W 250 i Milling drum Milling width 7 3 (2,200 mm) Milling depth * 1 0 14 (0 350 mm) Tool spacing 5 / 8
More informationPerfect texture and protection for concrete surfaces. Texture Curing Machine TCM 95 i TCM 180 i
Perfect texture and protection for concrete surfaces. Texture Curing Machine TCM 95 i TCM 180 i 02 03 At a glance: outstanding features of the new texture curing machine Highlights in operation > High
More informationTechnical specification Slipform Paver SP 25 / SP 25 i
Technical specification Slipform Paver SP 25 / SP 25 i Technical specification Slipform paver SP 25 and SP 25 i Concrete paving equipment Possible on left and right side Offset application Max. working
More informationTracked Paver SUPER 800
Tracked Paver SUPER 800 SUPER 800 Pave Widths 0.5 3.2m Maximum Laydown Rate 250 tonnes/h Clearance Width 1.2m At a Glance Small Paver for a Wide Range of Applications SUPER 800 At a Glance Track gauge
More informationTracked Paver SUPER 800
Tracked Paver Pave Widths 0.5 3.2m Maximum Laydown Rate 250 tonnes/h Clearance Width 1.2m At a Glance Small Paver for a Wide Range of Applications The is a very compact small paver which, due to its overall
More informationBinding agent spreader TC series
Technical specification Binding agent spreader TC series SW 10 TC SW 16 TC 02 03 Technical specification Binding agent spreader SW 10 TC Binding agent spreader SW 16 TC Container Container capacity 10
More informationCLOSE TO OUR CUSTOMERS. The complete DELIVERY RANGE
CLOSE TO OUR CUSTOMERS The complete DELIVERY RANGE CONTENTS WIRTGEN GROUP OVERVIEW 04 WIRTGEN DELIVERY RANGE 08 Cold Milling Machines 09 Cold Recyclers and Soil Stabilizers 10 Binding Agent Spreaders 11
More informationTracked Paver SUPER 800. Mini Class. Pave Widths m Maximum Laydown Rate 250t/h Clearance Width 1.2m.
Tracked Paver SUPER 800 Pave Widths 0.5 3.2m Maximum Laydown Rate 250t/h Clearance Width 1.2m www.voegele.info Highlights Track gauge only 1.1m Pave speed up to 60m/min. Clearance width only 1.2m Powerful
More informationTechnical specification Cold Milling Machine W 150 / W 150 i
Technical specification Cold Milling Machine W 150 / W 150 i Technical specification Cold milling machine W 150 and W 150 i Milling drum Standard FB 1,200 Option FB 1,500 Milling width 3 11 1,200 mm 4
More informationTracked Paver SUPER 700
Tracked Paver SUPER 700 SUPER 700 Pave Widths 0.5 3.2m Maximum Laydown Rate 200 tonnes/h Clearance Width 1.2m At a Glance Great Things Come in Small Packages SUPER 700 At a Glance Track gauge 1.1m Clearance
More informationDELIVERY RANGE. India
DELIVERY RANGE India CONTENTS WIRTGEN GROUP OVERVIEW 04 Well rounded 04 Strong in India 06 Strong and convincing local presence 10 WIRTGEN DELIVERY RANGE 12 Cold Milling Machines 14 Cold Recyclers and
More informationThe benchmark for perfect concrete paving in the 12-m class. Slipform Pavers. SP 124 SP 124 i SP 124 L SP 124 L i
The benchmark for perfect concrete paving in the 12-m class. Slipform Pavers SP 124 SP 124 i SP 124 L SP 124 L i 02 03 At a glance: outstanding features of the SP 124 / SP 124 i / SP 124 L / SP 124 L i
More informationSlipform Pavers SP 90 model series
The new benchmark for perfection in concrete paving. Slipform Pavers SP 90 model series SP 92 SP 92 i SP 94 SP 94 i 02 03 At a glance: outstanding features of the new SP 92 / SP 92 i Highlights in concrete
More informationElectronic Paver Titan 325 EPM
Electronic Paver Titan 325 EPM Applications Paving projects Motorways Rural roads, main roads and highways Runway construction Waste storage areas Hydraulic engineering (parallel and vertical to the slope)
More informationMOBILE MIXING PLANTS M1 - M2,5
MOBILE MIXING PLANTS M1 - M2,5 Schwing-Stetter MOVES CONCRETE. WORLDWIDE. Wherever concrete is produced and moved is where you will find Schwing-Stetter machinery. With plants in Germany, Austria, USA,
More informationEfficient milling in the 1-m class. Cold Milling Machine W 100 H / W 130 H
Efficient milling in the 1-m class. Cold Milling Machine W 100 H / W 130 H 02 03 High productivity regardless of the job to be performed. > HIGH MILLING PERFORMANCE IN THE ONE-METRE CLASS AT WORKING WIDTHS
More informationTracked Paver SUPER
Tracked Paver SUPER 2100-2 SUPER 2100-2 Maximum Pave Width 13m Maximum Laydown Rate 1,100 tonnes/h Transport Width 2.55m At a Glance Powerful, Economical, Low-Noise SUPER 2100-2 At a Glance Maximum pave
More informationDYNAPAC LARGE TRACKED PAVER. Dynapac F3030C
DYNAPAC LARGE TRACKED PAVER Dynapac F3030C DYNAPAC LARGE TRACKED PAVER THE DYNAPAC F3030C is a multi-functional combing decades of experience and new innovations. It offers large paving capacity with lowest
More informationEfficient small milling machine for standard applications Cold milling machine W 50
Efficient small milling machine for standard applications Cold milling machine W 50 The economically efficient alternative for countless small milling jobs Efficiency is the W 50 s hallmark The W 50 is
More informationSlipform Pavers SP 90 model series USA
The new benchmark for perfection in concrete paving. Slipform Pavers SP 90 model series USA SP 92 i SP 94 i 02 03 At a glance: outstanding features of the new SP 92 i Highlights in concrete paving (pages
More informationTracked Paver SUPER HD. Universal Class. Maximum Pave Width 8m Maximum Laydown Rate 700 tonnes/h Transport Width 3m.
Tracked Paver SUPER 1800-2 HD Maximum Pave Width 8m Maximum Laydown Rate 700 tonnes/h Transport Width 3m www.wirtgen-china.com.cn Highlights SUPER 1800-2 HD Maximum pave width 8m SB 300 HDT Extremely high
More informationTracked Paver SUPER
Tracked Paver SUPER 1600-2 SUPER 1600-2 Maximum Pave Width 8m Maximum Laydown Rate 600 tonnes/h Transport Width 2.55m At a Glance Tracked High-Tech Paver in the Mid Range SUPER 1600-2 At a Glance Maximum
More informationCompact large milling machine for dual fl ush-to-kerb milling. Cold Milling Machine W 200 H / W 200 H i
Compact large milling machine for dual fl ush-to-kerb milling Cold Milling Machine W 200 H / W 200 H i Ultra-flexible large milling machine The milling drum unit with hydraulically driven milling drum
More informationCompact CSM Systems. BC System
Compact CSM Systems BC System 1 CSM-Process Mixing of self-hardening slurries with native soils by using a modified trench cutter technique is a new and effective method for constructing cut-off walls,
More informationHigh-production installation Rumble strip milling attachment W 60
High-production installation Rumble strip milling attachment W 60 The W 60 rumbler attachment makes rumble strips easy to install Durable, reliable cold milling with added value The W 60 Rumbler is a standard
More informationmade in Germany EstrichBoy The legend among floor screed pumps
made in Germany EstrichBoy The legend among floor screed pumps The original for over 45 years The EstrichBoy from Putzmeister almost 50 years of continuous advancement and unrivalled configuration options.
More informationCold milling machines
Leadership through passion Cold milling machines W 50 R W 50 R i W 60 R W 60 R i Key innovations at a glance Innovations in operation pages 4 / 5 1 Intuitive, accurate levelling using the LEVEL PRO PLUS
More informationTechnical specifi cation Slipform Paver SP 15 / SP 15 i
Technical specifi cation Slipform Paver SP 15 / SP 15 i Technical specification Slipform paver SP 15 and SP 15 i Range of applications offset Concrete feeding Belt conveyor Belt conveyor, folding design
More informationTechnical specification. Binding agent spreader SW 18 SC / SW 18 SC i
Technical specification Binding agent spreader SW 18 SC / SW 18 SC i Technical specification 02 03 Binding agent spreader SW 18 SC Binding agent spreader SW 18 SC i Container Container capacity 23.5 yd³
More informationGummimischtechnik. High-performance mixing mills. High-performance mixing mills. for rubber compounding
Gummimischtechnik High-performance mixing mills High-performance mixing mills for rubber compounding 2 Efficient mixing room equipment for optimum quality Our range of mixing mills includes machine designs
More informationVerti-Mix self-propelled wagon. Verti-Mix SF Verti-Mix Double SF
Verti-Mix SF Verti-Mix Double SF Quick loading by means of high-performance milling cutter ICS-control intelligent steering of entire vehicle Clean picking-up to the exact kilogramme via reversible elevator
More informationSCHWING-STETTER ALWAYS CLOSE TO THE CUSTOMER.
SCHWING-STETTER ALWAYS CLOSE TO THE CUSTOMER. Parent plant Production subsidary Own/independent sales and serviec company Subject to technical and dimensional modifications. Photos are not binding. The
More informationEfficient operating alternative for large milling machines. Operator Comfort System
Efficient operating alternative for large milling machines Operator Comfort System Operator Comfort System for cost-effective machine operation Optional one-man operation to increase work efficiency Milling
More information00/00/00 QUOTATION Nº: 000/00 VIBRATORY TANDEM ROLLER, MARK PACLITE MODEL VR1200X2
00/00/00 QUOTATION Nº: 000/00 TO = VIBRATORY TANDEM ROLLER, MARK PACLITE MODEL VR1200X2 GENERAL CHARACTERISTICS:. Total mass, 2 600 kg. French Classification UNE 115-435 (PV3). Static linear load front
More informationINDUSTRIES (Pty)Ltd MOBILE MIXING PLANTS M1 M2,25. CONTACT : Allan Pletschke CELL :
INDUSTRIES (Pty)Ltd MOBILE MIXING PLANTS M1 M2,25 CONTACT : Allan Pletschke CELL : 082 450 2258 SCHWING-STETTER MOVES CONCRETE. WORLDWIDE. Wherever concrete is produced and moved is where you will find
More informationP4820D ABG. Volvo Tracked Pavers m 98 kw
P4820D ABG Volvo Tracked Pavers 2.5-6.5 m 98 kw Compact machine, big features The P4820D ABG is the smallest 2.5 m track paver in Volvo s paver offering and its compact design allows transporting with
More informationWheeled Paver SUPER
Wheeled Paver SUPER 1603-2 SUPER 1603-2 Maximum Pave Width 7m Maximum Laydown Rate 600 tonnes/h Transport Width 2.55m At a Glance Compact-Sized Wheeled Paver SUPER 1603-2 At a Glance Maximum pave width
More informationUniversal Class SUPER L
A WIRTGEN GROUP COMPANY Universal Class SUPER 1880-3 L Tracked Paver Maximum pave width 9.5m Maximum laydown rate 1000t/h Maximum layer thickness 50cm The high-grade asphalt specialist: powerful, efficient
More informationWheeled Paver SUPER
Wheeled Paver SUPER 1603-2 SUPER 1603-2 Maximum Pave Width 7m Maximum Laydown Rate 600 tonnes/h Transport Width 2.55m At a Glance Compact-Sized Wheeled Paver Innovative paver technology is not a matter
More informationOriginal Wirtgen Group parts requirement. Parts Special Campaign WINTER 2015 / 2016
Parts Special Campaign WINTER 2015 / 2016 Original Wirtgen Group parts requirement The practical ordering tool: From now on you can benefit from our new online service at www.partsandmore.net to find the
More informationGRANULES AGGLOMERATE PRODUCTION PLANT
MAGMA MACCHINE srl OFFER FOR: MR C02 GRANULES AGGLOMERATE PRODUCTION PLANT INCLUDED OF: Support plant structure Dosing and pouring system for prepolymer Activation system for adhesive with water Mixer
More informationLeading through passion Cold Milling Machines. W 100 CF i W 120 CF i W 130 CF i
Leading through passion Cold Milling Machines W 100 CF i W 120 CF i W 130 CF i The outstanding innovations of the new, compact front loaders Innovations in operation Pages 4 / 5 1 Intuitive, precise leveling
More informationSANY PAVERS.
SANY Industry Town, Changsha Economic and Technological Development Zone, Hunan Province, China Service Line: +86 4006 098 318 E-mail: crd@sany.com.cn www.sanygroup.com Due to our process of continuous
More informationDYNAPAC LARGE TRACKED PAVER RANGE. Dynapac SD2500C / SD2500CS SD2550C / SD2550CS
DYNAPAC LARGE TRACKED PAVER RANGE Dynapac SD2500C / SD2500CS SD2550C / SD2550CS THE DYNAPAC SD-PAVERS COMBINE decades of experience and new innovations. During development we focused on paving processes
More informationExtremely Compact, Highly Manœuvrable, SUPER i
Just 5.68m long, the new SUPER 1600-3i is highly acclaimed Extremely Compact, Highly Manœuvrable, SUPER 1600-3i Just 5.68m long, the new SUPER 1600-3i is highly acclaimed Extremely Compact, Highly Manœuvrable,
More informationVerti-Mix self-propelled wagon. Verti-Mix SF Verti-Mix Double SF
Verti-Mix SF Verti-Mix Double SF Quick loading by means of high-performance milling cutter Clean picking-up to the exact kilogramme via reversible elevator conveyor The self-propelled wagon: Powerful,
More informationThe MADO EXTRUSION GRINDER For ambitious food processing companies.
The MADO EXTRUSION GRINDER For ambitious food processing companies. Years Meat processing machines The MADO EXTRUSION GRINDER increases your profits. The new EXTRUSION GRINDER from MADO - specialist manufacturers
More informationTechnical data Drilling rig LB 24
Technical data Drilling rig LB 24 Concept and characteristics Kelly rope Leader top for Kelly rope Leader top for auxiliary rope Tensioning cylinder for crowd system Rotary Kelly bar Inclination device
More informationModern machinery for universal spreading applications Binding agent spreaders
Modern machinery for universal spreading applications Binding agent spreaders Streumaster spreading equipment: Perfect application of binding agents High application rate and maximum spreading precision
More informationSoil Stabilizing Rig
SPEC. F5-2691-E Date: May, 2000 SPECIFICATION NISSHA GEOMATE Series Soil Stabilizing Rig Model : DHJ-12 (Cement slurry + soil-in place mixing version ) Quantity: unit May, 2000 NIPPON SHARYO, LTD. Nagoya,
More informationSANY PAVERS.
SANY Industry Town, Changsha Economic and Technological Development Zone, Hunan Province, China Service Line: +86 4006 098 318 E-mail: crd@sany.com.cn Distributor Info. Due to our process of continuous
More informationVerti-Mix self-propelled wagon. Verti-Mix SF fast-cut Verti-Mix Double SF fast-cut
Verti-Mix SF fast-cut Verti-Mix Double SF fast-cut Fast-cut picking-up system for effective and gentle picking-up of material The self-propelled model: Powerful, robust, comfortable Self-propelled fodder
More informationSoil Stabilizer/Reclaimer SX-6 SOIL STABILIZER/RECLAIMER. SX-6e/ex. ENGINE SX-6e: Tier 4f; Cummins QSX hp (503 2,100 rpm
SOIL STABILIZER/RECLAIMER SX-6e/ex Soil Stabilizer/Reclaimer SX-6 ENGINE SX-6e: Tier 4f; Cummins QSX-15 675 hp (503 kw) @ 2,100 rpm SHIPPING WEIGHT 83,480 lbs* (37,865 kg) * 120 gal fuels & water/injection
More informationCompact Tracked Paver F5 CS
Compact Tracked Paver F5 CS Overview Electric system Engine output @ 2,300 min -1 Theoretical paving capacity Max. working width Weight incl. screed F5 CS Conventional 45 kw 300 t / h 3.1 m 5.5 t New look
More informationAK SERIES Grinders. AK 235 AK 510 K BioPower AK 560 EcoPower AK 560 EcoPower Plus AK 635 K AK 635 SA WE CARE
AK SERIES Grinders AK 235 AK 510 K BioPower Plus AK 635 K AK 635 SA WE CARE AK SERIES AK SERIES IN OPERATION processing Grinding of waste wood / pallets POWERFUL AND VERSATILE THE AK SERIES RELIABLE GRINDERS
More informationSystems. ContiMix I + II Stationary, mobile and wheel - mounted mobile. With capacity of t / h
Systems ContiMix I + II Stationary, mobile and wheel - mounted mobile With capacity of 120 320 t / h ContiMix 120 320 t/h The next - generation continuous asphalt mixing plant Batch and continuous combination
More informationEconomical mining of hard rock Surface Miner 2500 SM
Economical mining of hard rock Surface Miner 2500 SM Highly efficient mining of hard rock without drilling and blasting Designed for tough mining operations The tried-and-tested 2500 SM surface miner is
More informationTracked Paver SUPER Highway Class. Maximum Pave Width 13m Maximum Laydown Rate 1,100 tonnes/h Transport Width 2.55m.
Tracked Paver SUPER 2100-3 Maximum Pave Width 13m Maximum Laydown Rate 1,100 tonnes/h Transport Width 2.55m www.voegele.info The Highlights of the New Generation The PaveDock Assistant enhances process
More informationThe new benchmark for perfection in concrete paving. Slipform Paver SP 64 i
The new benchmark for perfection in concrete paving. Slipform Paver SP 64 i 02 03 At a glance: outstanding features of the new SP 64 i Highlights in concrete paving 1 EXCEPTIONAL FLEXIBILITY IN CONCRETE
More informationVÖGELE Screeds Range of Products
VÖGELE Screeds Range of Products A Successful Brand for a Job Well Done Time and Again! VÖGELE Screeds Because Building Roads Requires Accuracy Modern road construction makes higher and higher demands
More informationAP755. Asphalt Paver. Cat C7 Engine with ACERT Technology Gross Power (SAE J1995) at 2200 rpm Net Power (ISO 9249) at 2200 rpm Operating Weight with
AP755 Asphalt Paver Cat C7 Engine with ACERT Technology Gross Power (SAE J1995) at 2200 rpm Net Power (ISO 9249) at 2200 rpm Operating Weight with AS3251 Screed AS4251 Screed RB 5700 Screed RMB 12000 Screed
More information