Please consider: If prices or commissions are mentioned, they do not include commission for us or any agents. We kept the message original!!!
|
|
- Sharleen Chapman
- 5 years ago
- Views:
Transcription
1 Machinery Listings Carding Marzoli cards MARZOLI C Finatex International: Please ask for details at: Reference: 7435 Cost: 0 Terms: - Please consider: If prices or commissions are mentioned, they do not include commission for us or any agents. We kept the message original!!! Reference: 9091 Cost: 0 Terms: SEE -14 B136 MARZOLI chute feeds for card Year 1995/1997 Centralized waste collection Frequency inverterters on board 14 CX300 MARZOLI hioght production cards Year 1995/1997 Feeding by B136 chute feed Likeri-in deam 350 mm. Under likering fix carding segment Fix flats in entry and exit Revolving flats in iron custed Drafting for cotton LOPFE SLT-4 autoleveller fitted in the panel Centralized waste collection Exit cans 40 x 45 ( 1020mm. x 1200 mm.) Automatic cans change pneumatic Fot Price : Euro ,00 each.- DESCRIPTI ON Reference: 9702 Cost: 0 Terms: - -6 NOS.of MARZOLI CARDS Details of Marzoli cards as follows MAKE MODEL Com no MFG.YEAR Coiler TYPE MARZOLI C 601 N " X 48 MARZOLI C 601 N " X 48 MARZOLI C 601 N " X 48 MARZOLI C 601 N " X 48 MARZOLI C 601 N " X 48 MARZOLI C 601 N "X 48 All machines equipped with : Long terms auto leveller/chute feed system & are mounted with GRAF wire. Working on 60/kgs /hrs used for ring frame fedding All are in running condition working with cotton.
2 Reference: 9968 Cost: 0 Terms: Marzoli cards model C 601 Year 2004 Exit can 40 x 48 Marzoli Chute feed Condition: Running Delivery: Ready Photos attached Price: on request Reference: Cost: 0 Terms: Marzoli cards model C 501 Year 2000/2001 Marzoli B 139 chute feed Exit can 24 x48 Location: Europe Dlivery:Ready Photos: attached Price: on request Reference: Cost: 0 Terms: - -3 Cotton cards C300 MARZOLI Year : 1986, with autoleveller, inverter, delivery cans 630 x 1070 mm Reference: Cost: 0 Terms: SEE DESCRIPTI ON - 10 MARZOLI CARDS Type CX 300 with Chute Feed TAG # Price: F.O.T. EURO 15, each 3 MARZOLI CARDS Type C 300/S with Chute Feed TAG # 99067, 99068, Price: F.O.T. EURO 15, each
3 Reference: Cost: 0 Terms: Marzoli combers model PX 1 Year 1989/90 Exit 24 cans Conditions: dismantled Reference: Cost: 0 Terms: - Revized- 7 MARZOLI CARDS model CX 300 Autolever Automatic can changer Marzoli Chute Feed Pictures : Attached Conditions: machines are dismantled Price: On request. Reference: Cost: 0 Terms: - Nr.12.. B136 MARZOLI chute feeds for card Year 1996/1997 Centralized waste collection Frequency inverterters on board Nr. 12 CX300 MARZOLI height production cards Year 1996/1997 Feeding by B136 chute feed Likeri-in deam 350 mm. Under likering fix carding segment Trash master and carding Segment Hollinsworth Revolving flats Drafting for cotton LOPFE SLT-4 Autoleveller fitted in the control panel ( long and short terms) Centralized waste collection intermittent and splitted Singole delivery with coiler RD MARZOLI drived with belt Exit cans 40 x 48 ( 1020mm. x 1200 mm.) Automatic cans change pneumatic Safty covers CE approved Main motor with brakes SALES CONDITIONS OF THIS PROJECT DELIVERY : Immediate LOCATION : ITALY VOLTAGE : 380/400 Volts with 3 Phase and 50 Hertz
4 Reference: Cost: 0 Terms: MARZOLI CARDS model CX 300 Autolever Automatic can changer Marzoli Chute Feed Conditions: machines are dismantled Price & Pictures: On request. Reference: Cost: 0 Terms: MARZOLI CARDS model CX 300 Autolever Automatic can changer Marzoli Chute Feed Conditions: machines are dismantled Reference: Cost: 0 Terms: Marzoli cards model CX 300, year 1994 MB 90 panel Autoleveller Lopfe SLT4 Chute feed Trutzschler Model FBK Marzoli Cards model C 501, year 1 X X 2001 Machines conditions: mill floor Price and photos: on request
5 Reference: Cost: 0 Terms: Marzoli Cards model C 501, year 1 X X 2001 Machines conditions: mill floor Price and photos: on request Reference: Cost: 0 Terms: Marzoli Cards model C 501, year 1 X X x 2001 Machines conditions: ware house Price and photos: on request Reference: Cost: 0 Terms: SEE -10 CX300 MARZOLI CARDS YOC ww 1000 mm,feeding by chute Drafting for cotton,deam 350 mm Delivery with coiler,exit cans 40" x 45 " 10 sets available. 6 sets are still running,others are stopped. Price: eur/each EX.WORK Mill floor. DESCRIPTI ON Complete Lines Marzoli cards
6 Reference: 8981 Cost: 0 Terms: complete line composed of : 01 Electrical Box Marzoli model B95/4, Year Cage condenser Marzoli model B41/1 01 Fan Marzoli model B151, year Opener Marzoli model B35, year 1995 Working whidt mm Beater whit 8 stave spiked Whit cage condenser B41/1 01 cards Marzoli model CX 400, year 1997 Exit can 40 whit automatic cans changer Chute feed Marzoli model B138 Single suction, in our warehouse Price : on request Photo: attached Nonwoven Marzoli cards Reference: Cost: 0 Terms: - 03 Marzoli Cards model C 501, year 1 X x 2001
Pictures not available EURO, CNF NO. 04 SETS COTTON CARDS C50 RIETER YEAR : 1995
Machinery Listings Carding Rieter cards Revized Ref. no. 6433-2 X Rieter C4 Cards Price : Euro 14.000 CNF Sold Ref. no. 6434-4 X Rieter C4 cards Price : Euro14.000 CNF/each available Finatex International:
More informationPLEASE NOTE: Inspections shall only be arranged if tentative price agreements have been reached between buyer and seller, subject to inspection.
Machinery Listings Calvani Mason -01 MAS model MIXICOMBER sample Card Year 2002 V 400 Hz 50 Price: on request Location: Italy Delivery: Ready Finatex International: Please ask for details at: marketing@finatexinternational.com
More informationPlease consider: If prices or commissions are mentioned, they do not include commission for us or any agents. We kept the message original!!!
Machinery Listings Yarn Processing Rieter Ring Frame 04 RIETER Ringframes Model: G 5/2 YOC 1993 No.of Spindle / machine: 1020 Ring diameter: 40 mm Gauge: 70 mm Drafting: SKF Autodoffing Linked with: Autoconer
More informationDRAW FRAME LD2. Lakshmi Machine Works Limited offers the following products in the Combing System.
COMBING SYSTEM Lakshmi Machine Works Limited offers the following products in the Combing System. A) Draw Frame Non Autoleveller Draw Frame LD2 Autoleveller Draw Frame LDAZ The draw frame LD2 is a novel
More informationPictures not available 1 SECTIONAL WARPER BENNINGER BEN-SUPERTRONIC WIDTH 2.60M YEAR 1995 Details: Beams Diameter 1000mm Creel with 540 spindles
Machinery Listings Warping Benninger Finatex International: Please ask for details at: marketing@finatexinternational.com Reference: 7656 Cost: 0 Terms: - 1 SECTIAL WARPER BENNINGER BEN-SUPERTRIC WIDTH
More informationPLEASE NOTE: Inspections shall only be arranged if tentative price agreements have been reached between buyer and seller, subject to inspection.
Machinery Listings Complete Plant Multiple Waterjet Finatex International: Please ask for details at: marketing@finatexinternational.com Reference: 14703 Cost: 0 Terms: - -21 Full factory Daewon T.F.O
More informationPLEASE NOTE: Inspections shall only be arranged if tentative price agreements have been reached between buyer and seller, subject to inspection.
Machinery Listings Carding Thibeau Finatex International: Please ask for details at: marketing@finatexinternational.com Reference: 4614 Cost: 160,000 Terms: EACH, http://finatexinternational.com/pictures/4614.zip
More informationPLEASE NOTE: Inspections shall only be arranged if tentative price agreements have been reached between buyer and seller, subject to inspection.
Machinery Listings - Murata Spinning Finatex International: Please ask for details at: marketing@finatexinternational.com Reference: 9833 Cost: 0 Terms: - -01 Nos Murata Vortex Airjet Spinning Machine
More informationMachinery Listings. Complete Plant Multiple. Ring Frame. Finatex International: Please ask for details at:
Machinery Listings Complete Plant Multiple Ring Frame Finatex International: Please ask for details at: marketing@finatexinternational.com Reference: 10879 Cost: 0 Terms: - Pictures not available 1 RING
More information- Price GS900 Euro each one includin. Please consider N 04 Smit Textile loom type G6300 JUST SOLD
Machinery Listings Warping Smit Dobby Finatex International: Please ask for details at: marketing@finatexinternational.com Reference: 8224 Cost: 0 Terms: SEE http://finatexinternational.com/pictures/8224.zip
More informationDESCRIPTI ON. Pictures not available 1 THEMA 11 serie 103 Jacquard elettron. BONAS BLJ 2688 SerialN.B2340 Controller Bonas S200
Machinery Listings Weaving Somet Jacquard Finatex International: Please ask for details at: marketing@finatexinternational.com Reference: 7248 Cost: 0 Terms: SEE http://finatexinternational.com/pictures/7248.zip
More informationPLEASE NOTE: Inspections shall only be arranged if tentative price agreements have been reached between buyer and seller, subject to inspection.
Machinery Listings - Rieter Open End -6sets OE Ring Spinning machines Brand: Elitex Model: BDA10N YOC: 1991 No spindle: 192sp Condition: running Finatex International: Please ask for details at: marketing@finatexinternational.com
More informationPictures not available 1 WARPING MACHINE: SECTIONAL BENNINGER SUPERTRONIC W:3800 YOC CREEL BENNINGER 800 BOBBINS YOC 1990
Machinery Listings Warping Benninger Finatex International: Please ask for details at: marketing@finatexinternational.com Reference: 6116 Cost: 0 Terms: - 1 WARPING MACHINE: SECTIAL BENNINGER SUPERTRIC
More informationPLEASE NOTE: Inspections shall only be arranged if tentative price agreements have been reached between buyer and seller, subject to inspection.
Machinery Listings - Rieter Open End -6sets OE Ring Spinning machines Brand: Elitex Model: BDA10N YOC: 1991 No spindle: 192sp Condition: running Finatex International: Please ask for details at: marketing@finatexinternational.com
More informationMachinery Listings. Complete Plant Rieter. Ring Spinning. Reference: 7154 Cost: 0 Terms: -
Machinery Listings Complete Plant Rieter Ring Spinning Finatex International: Please ask for details at: marketing@finatexinternational.com Reference: 7154 Cost: 0 Terms: - RIETER RING PLANT 20160 SPINDLES
More informationProfile Spraying Machine, Makor Model IRIDE 206/W (Modified)
TECH SPEC PAGE 1 Profile Spraying Machine, Makor Model IRIDE 206/W (Modified) The spraying machine IRIDE 206 has been designed for the protection of the work environment, and built to satisfy present-day
More informationA Complete Guide to Royal Sovereign NexxPress TM. Calender Heat Transfer Systems June 2015
A Complete Guide to Royal Sovereign NexxPress TM Calender Heat Transfer Systems June 2015 NexxPress TM Calender Heat Transfer The Next Generation in Heat Transfer Systems Roll to Roll Production The versatile
More informationACCESSORIES: 36 Cloth roll, 36 beams, headless and droppers, 384 frames, 96 feeders.
Machinery Listings Complete Plant Picanol Dobby Finatex International: Please ask for details at: marketing@finatexinternational.com Reference: 13320 Cost: 0 Terms: - http://finatexinternational.com/pictures/13320.zip
More informationREMOTE POWERING Central Energy System ( HUB )
/ 0 REMOTE POWERING Central Energy System ( HUB ) User Guide Mitra E&I SCA Wavre Belgium 009 Subject to modifications without notice / 0 Content RECTIFIER SYSTEM - USER MANUAL The information and pictures
More informationPower and Cooling. Chassis Power System
This chapter describes the Cisco NCS 6000 Series Routers power and cooling systems. It also provides the power, grounding, and cooling requirements for the installation site to help you plan the site facilities
More informationEASY-MASTER PRO-MASTER DYNESTIC 7515 / G DYNESTIC The perfect nesting technology CNC machining centers Your Partner for Precision
EASY-MASTER PRO-MASTER DYNESTIC 7515 / 7516 7521 G DYNESTIC 7515 7516 The perfect nesting technology CNC machining centers Your Partner for Precision and Productivity Spezialmaschinen DYNESTIC 7515 7516
More informationAC METRIC (IEC) MOTORS THREE PHASE
These high efficiency motors meet North American performance standards and EPACT energy efficiency mandates, and have.5 service factors. Typically used for replacement on machine tools, textile machinery
More informationChest Heated Ironer Refer to Page 3 for Model Numbers
Chest Heated Ironer Refer to Page 3 for Model Numbers Parts www.comlaundry.com Part No. 1800144R1 February 2008 Table of Contents Title Page Parts Ordering Information... 2 Nameplate Location... 2 Model
More informationTECHNICAL INFORMATION
1 WORKING MACHINE WITH SOLVENT: HYDROCARBON MACHINE CAPACITY (RATIO 1:20) Lbs 40 BASKET Diameter Depth Volume Wash speed Extract speed Door opening inches 35.4 inches 21 gal 90 rpm 12 50 rpm 300 540 inches
More informationTECHNICAL INFORMATION
1 WORKING MACHINE WITH SOLVENT: HYDROCARBON MACHINE CAPACITY Lbs 60 BASKET Diameter Depth Volume Wash speed Extract speed Door opening inches 39.4 inches 25.2 gal 132 rpm 12 50 rpm 300 540 inches 20 SOLVENT
More informationBelt drives. Table (5.1) types of Belts Belt type Sketch Joint Size range Centre distance yes Flat. Yes D = 8. to 4
5. Introduction Belts are used to transmit motion between shafts that are located at a considerable distance from each other. They are not used for exact fixed speed ratio because slipping may occur during
More informationMANUAL FOR USE AND MAINTENANCE OF THE MACHINE GALAXY
Page 1 of 19 MANUAL FOR USE AND MAINTENANCE OF THE MACHINE GALAXY It contains: E.E.C. Declaration of Conformity concerning mini-hydraulic cutting machine Page 2 of 19 We Oma System S.r.l. Via delle Scienze,
More informationCUT AWAY IN BRAKE COMPONENTS
. 68 69 70 71 72 73 74 75 76 77 78 Cut away in Brake Components Cut away in Disk and Drum Cut away in ABS Module Four Wheel Drum Brake Operation with Hand Brake [Manual Operation] Four Wheel Drum Brake
More informationWe are one of the well reputed manufacturers, suppliers and exporters of Textile Spinning Machineries spare parts. These are extremely appreciated
We are one of the well reputed manufacturers, suppliers and exporters of Textile Spinning Machineries spare parts. These are extremely appreciated for quality performance, reliability, corrosion resistance
More informationSC1515 Radiator coolant replacement system WOLF S HEAD
SC1515 Radiator coolant replacement system Product Catalogue 2012.01 - Pneumatic design provides simple and easy extraction - Transparent twin cylinder, easy to monitor fluid separation process - Also
More informationOperating manual UPS - System
Operating manual UPS - System POWERMASTER M MIL 1000VA 7Min. BAX 3330 E UPS-Division Issued 15. August 2006 JOVYATLAS JOVYATLAS Elektrische Umformtechnik GmbH Groninger Straße 29-37 D-26789 Leer/Ostfriesland
More informationGear Coupling. Applications
Gear Coupling Applications Power Transformation Print & Paper Industries Gear Boxes Textile Industries Conveyors Pumps Compressors Process, Chemical & Pharmaceutical Industries Nylon Gear Couplings Nylon
More informationMaterial Specification Note: Products may vary slightly from equipment shown in pictures
Client: Contact: Material Specification Note: Products may vary slightly from equipment shown in pictures Sly Filters RPF Rotary Pre-filter Unit The Sly Filters rotary pre-filter unit is used as a part
More informationASSEMBLY INSTRUCTIONS
WIND GENERATOR KIT Complete Set Including All Accessories 500 Watts rated at 12,5 m/s (= 28 mph) 6 Meter (= 20 ft.) Free-Standing Tower ASSEMBLY INSTRUCTIONS Contents WIND GENERATOR KIT Complete Set Including
More informationNG Granulator. Selective grain size
NG Granulator Selective grain size Headquarters of BHS-Sonthofen BHS-Sonthofen We are a mid-sized, owner-operated group of companies with over 300 employees. We are innovative, passionate about technology
More informationDESCRIPTI ON. -Mario Crosta raising machine, type MC20/20, wide 320cm, 20 cylinders 20/20, yoc 2002, 440Vts -50 Hz - Still in mill, TOP conditions -
Machinery Listings - Mario Crosta Finatex International: Please ask for details at: marketing@finatexinternational.com Reference: 15986 Cost: 0 Terms: SEE http://finatexinternational.com/pictures/15986.zip
More informationGeneral performance IE3 cast iron motors in frame sizes 71 to 355
PRODUCT NOTE General performance IE3 cast iron motors in frame sizes 71 to 355 General performance IE3 motors are ideal for OEMs to build into pumps and fans, as well as for other applications including
More informationRoll Heated Flatwork Finisher
Roll Heated Flatwork Finisher 13 Inch (325 mm) Roll Heated Models Refer to Page 3 for Model Numbers Parts FWF1N_1300576 www.alliancelaundry.com Part No. 1300576R20 August 2017 Table of Contents Title
More informationUNIT-I ALTERNATORS PART-A
UNIT-I ALTERNATORS 1. What principle is used in Alternators? 2. What are the requirements of an alternator? 3. Mention the types of alternator rotor. 4. What is hunting in alternators? 5. What are the
More informationSapling 2-Wire Digital Communication System Line Drawing
Sapling 2-Wire Digital Communication System Line Drawing Single Configuration A - Small 2-Wire Clock System using one converter box on a single clock run. 24 Volt (5.5 Amp max.) Power & Secondary Clocks
More informationM50 L50 Series Multistage Regenerative Turbine Pumps
Page M- MTH PUMPS M L Series Multistage Regenerative Turbine Pumps Capacities to 4 GPM Heads to Feet Single or Multi-stage Units (up to stages) Vertical Close Coupled Horizontal Close Coupled Horizontal
More informationAUTOBREN ROAD SWEEPER TS7 DESCRIPTIVE DATA SHEET REV
AUTOBREN ROAD SWEEPER TS7 DESCRIPTIVE DATA SHEET REV. 14.02.2014 1. GENERAL VEHICLE INFORMATIONS - Suitable vehicle to operate on road and apron with chassis of commercial origin; -Collection system exclusively
More informationENGINE DISPLACEMENT 2000 NUMBER OF VALVES 16 ENGINE SET NUMBER
MANUFACTURER Subaru TYPE Forester ENGINE DISPLACEMENT 2000 NUMBER OF VALVES 16 ENGINE CODE / NUMBER FA20 DIT VEHICLE CATEGORIES M TRANSMISSION AT VERSION Direct LiquiMax-2.1 PETROL ECU MANUFACTURER / CODE
More informationRegenerative Turbine Pumps
Bulletin M M Series Regenerative Turbine Pumps Capacities to 8 GPM Heads to Feet MTH M Series Vertical base mount and horizontal pedestal mounted multi-stage regenerative turbine pumps represent the most
More informationPLEASE NOTE: Inspections shall only be arranged if tentative price agreements have been reached between buyer and seller, subject to inspection.
Machinery Listings - Multiple Laboratory Equipment Finatex International: Please ask for details at: marketing@finatexinternational.com Reference: 15899 Cost: 0 Terms: - -CHEMICAL LAB.-----------------------------------------------------------------1
More informationC e l l C O M. G S M I n t e r c o m
C e l l C O M G S M I n t e r c o m Call fixed line phone GSM SIGNAL Call mobile cell phone Accepts any GSM SIM card. Quad band modem. 850 / 900 / 1800 / 1900 MHz Calls up to 3 numbers in sequence GSM
More informationTECHNICAL INFORMATION F25 AS LT3 12/2011 / B 1
F25 AS LT3 1 WORKING MACHINE WITH SOLVENT HYDROCARBON MACHINE CAPACITY 25 Kg 55 60 Lbs BASKET Diameter 1000 mm 39.4 inches Depth 640 mm 25.2 inches Volume 500 Lt 14.1 cu.ft Wash speed 20 50 rpm Extract
More informationR13 SET - 1. b) Describe different braking methods employed for electrical motors. [8M]
Code No:RT32026 R13 SET - 1 III B. Tech II Semester Regular Examinations, April - 2016 POWER SEMICONDUCTOR DRIVES (Electrical and Electronics Engineering) Time: 3 hours Maximum Marks: 70 Note: 1. Question
More informationDC TO AC POWER INVERTER USER INSTRUCTION MANUAL. Applicable for: FTS800/FTS1000/FTS1500
DC TO AC POWER INVERTER USER INSTRUCTION MANUAL Applicable for: FTS800/FTS1000/FTS1500 Description Power Inverters are products which change direct current (DC) electricity to alternating current (AC)
More informationFull Load Amps Model Number List 1.52/ / / / / /1.3 4/2 3.6/1.8 4/2 4.4/ / / /2.8 2.
Variable Speed & : VAC, Hz Input Ratings (V/Hz Mode) & Enclosures (V/Hz Mode) Enclosures (Frames 2-445T) (V/Hz Mode) Enclosures (Frames 447-449T) Variable (V/Hz Mode) & Enclosures PowerMatch With All Reliance
More informationMINING ELECTRIC MOTORS 3KTCR, 4KTCR, 5KTCR
MINING ELECTRIC MOTORS 3KTCR, 4KTCR, 5KTCR Explosion protection Certificate of Conformity: Frame size 71 and 160 Frame size 80, 90, 100, 112, 132 Frame size 180, 200, 225 Frame size 250 Frame size 280
More informationTECHNICAL INFORMATION HXL 8015 S 11/2011 / 730-C 1
1 WORKING MACHINE WITH SOLVENT HYDROCARBON MACHINE CAPACITY 15 Kg 35 Lbs BASKET Diameter 800 mm 31.5 inches Depth 560 mm 22 inches Volume 285 Lt 10.1 cu.ft Wash speed 20 55 rpm Extract speed 300 500 rpm
More informationNM650 SERVICE PARTS TABLE OF CONTENTS. Cabinet Air Cooled Refrigeration Water Cooled Refrigeration Water System Gearmotor...
This parts list contains the service parts and wiring diagrams for this model. Check the model number in question to be sure that it is applicable to this parts list. Caution: This model ice maker has
More informationLABORATORY PELLET MILL PELLET MILL TYPE CLM
The pellet MILL FOR the Professionals LABORATORY PELLET MILL CLM 200.20 hp Capacity: 150-300 kg/h - 6 pole motor 15 kw max. - Conditioner motor 0,5 kw - Feeder speed can be used with VFD or hydraulic gear
More informationSHERWOOD HOUSE, KINGSMILL WAY, MANSFIELD, NOTTS, NG18 5ER. UNITED KINGDOM OFFICE TEL: +44 (0) FAX: +44 (0)
MAYOENGINEERING LTD SHERWOOD HOUSE, KINGSMILL WAY, MANSFIELD, NOTTS, NG18 5ER. OFFICE TEL: +44 (0)1623 651102 FAX: +44 (0)1623 414495 E-MAIL: sales@mayoengineering.com WEB SITE: www.mayoengineering.com
More informationMET-TECH Product Data Sheet REBAR PRODUCTION LINE MM - DIA MM - L= 6-14 M
MET-TECH Product Data Sheet REBAR PRODUCTION LINE - 120-140 MM - DIA. 8-32 MM - L= 6-14 M Ref. No.: REBAR180401 Year: 1973 Brand: DANIELI, POMINI, FARREL, ALLEN-BRADLEY Qty. 1 Second-hand rebar production
More informationDye Sublimation Calenders
Dye Sublimation Calenders Entry Level - Sampling - Light Production InPress - Light - Medium Production NexxPress - Medium - Commerical Production Oil or Infra-Red Options HIGHLIGHTS $$$ Maximize Impact
More informationUPS Wizard User s Manual
1. The communication cable M2502: This is a special designed cable for the communication of UPS with your PC; only connecting with the correct cable, the PC can detect the UPS. 2. The main window of the
More informationVoltage 400V 3N 50Hz. L W H Weight Fans Surface. Air Flow [m 3 /h] Primary [m 2 ] Ø [mm]
Open condensing units with air condenser and semi-hermetic compressor Galvanized and painted in RAL7035 base Semi-hermetic compressor Air condenser unit with 4 poles fans 230/1 Vibration absorber on discharge
More informationFM800R SERVICE PARTS
This parts list contains the service parts and wiring diagrams for this model. Check the model number in question to be sure that it is applicable to this parts list. Caution: This model ice maker has
More informationCX600 (MS-1682) Assembly Guide
CX600 (MS-1682) Assembly Guide 1 LCD MODULE ASSY 2 UPPER CASE ASSY 3 LOWER CASE ASSY 4 ASSEMBLE UPPER CASE AND LOWER CASE 5 KEYBOARD 6 THERMAL-KIT CPU DRAM AND WLAN MODULE 7 ODD MODULE 8 HDD MODULE 9 BOTTOM
More informationPERMANENT MAGNETIC AND RARE EARTH
COOLANT CLEANERS PERMANENT MAGNETIC AND RARE EARTH Smooth-faced and extended-pole Coolant Cleaners extend the life of cutting tools, grinding wheels, pumps and coolant fluids. FEATURES & Benefits Cleaner
More informationComputerscales DX Model Operating Instructions
16892 146 th St SE, Monroe, WA 98272 (360) 453-2030 Computerscales DX Model 72641 Operating Instructions QUICK START INSTRUCTIONS: 1) Set up pads alongside kart (they are interchangeable). 2) Connect cables
More informationLaboratory pellet mill
The pellet MILL FOR the Professionals Laboratory pellet mill - 6 pole motor 18,5 kw max. - Conditioner motor 0,75 kw - Feeder speed can be used with VFD or hydraulic gear drive (0,37 kw) - Die I.D. 200
More informationThe Convergence of Advanced Technology and Tradition
The Convergence of Advanced Technology and Tradition The new FL200 was born out of Toyota s unending pursuit of the ideal roving frame, one that enables anyone to spin high-quality roving at high speeds,
More informationMINING ELECTRIC MOTORS 3KTCR AND 4KTCR
MINING ELECTRIC MOTORS 3KTCR AND 4KTCR Explosion protection Certificate of Conformity: Frame size 71 and 160 Frame size 80, 90, 100, 112, 132 Frame size 180, 200, 225 Frame size 250 Frame size 280 Frame
More informationWork Professional with professional machines
QUTATION Computer Panel Saw Date : 2015/04/02 Specialized in Panel Saw from SOSN Model : SOSN-338 Computer Panel Saw 338 means Length of cutting.cutting length is 3800 mm Machine Specification : CAPACITY
More informationMYERS 4VCDP. 4" Solids Handling
MYERS 4VCDP Standard Submersible Dry Pit 4" Solids Handling Wastewater Pumps WWW.FEMYERS.COM TECHNICAL INFORMATION 2 SMOOTH OPERATION The 4VCDP submersible dry pit wastewater pumps are a heavy-duty 4"
More informationCX600 (MS-1682) Disassemble Guide
CX600 (MS-1682) Disassemble Guide 1 BATTERY PACK 2 BOTTOM DOOR ASSY 3 HDD MODULE 4 ODD MODULE 5 THERMAL-KIT CPU DRAM AND WLAN MODULE 6 KEYBOARD 7 SEPARATE UPPER CASE AND LOWER CASE 8 LOWER CASE ASSY 9
More informationOperating Instructions Type MPT 53
Operating Instructions www.turnstiles.us Type MPT 53 Contents 1. Delivery... 2 2. Safety...3-4 3 Description and operation... 5 4. Technical Data 6 5. oundation...6-9 6. Assembly and installation...10-13
More informationIndustrial and Commercial Duty IEC Motors
Industrial and Commercial Duty IEC Motors A Regal Brand Five product families delivering a world of opportunity LEESON Passport Series IEC Motors. There s a world of opportunity right here at home. The
More informationPNEUMATIC VERTICAL AND PUSH-PULL CLAMPS Features and Specifications: Vertical models V75X, V150X, V250X and V450X are of zinc plated pressed steel
PNEUMATIC VERTICAL AND PUSH-PULL CLAMPS Features and Specifications: Vertical models V75X, V150X, V250X and V450X are of zinc plated pressed steel construction and have compact cylinders without tie-rods.
More informationEdition Manual Chapter Page Workshop Manual, Stiga Park 4 Hydraulic system 8
2008-05-19 Workshop Manual, Stiga Park 4 Hydraulic system 8 The charge pump (1) and the main pump (2) are integrated into one unit, the hydraulic pump (C) which is located separat in front of the engine.
More informationIntroduction to Closed-Loop Control Overview
CLC1 Introduction to Closed-Loop Control Overview DC Motor Drive - Simplified Block Diagram Speed Set Point (Reference) PS Com + Summing Point PS Com + Gain Operational Amplifier Error Signal Firing Circuit
More informationChiller. VLC 524 to Air Cooled Condensing Units Engineering Data Manual. 154 to 347 kw
Chiller VLC 524 to 1204 Air Cooled Condensing Units Engineering Data Manual 154 to 347 kw Outstanding Strength Points Units with R410A refrigerant (it will be the real replacement of R22). As near azeotropic
More informationMachinery Listings. Complete Plant Multiple. Ring Frame. Finatex International: Please ask for details at:
Machinery Listings Complete Plant Multiple Ring Frame Finatex International: Please ask for details at: marketing@finatexinternational.com Reference: 10879 Cost: 0 Terms: - 1 RING FRAME 5115 1994-95 2
More informationINDUSTRIAL PRODUCTS 2010 CATALOG
has a new name SHURflo Industrial INDUSTRIAL PRODUCTS 2010 CATALOG Pumps: Centrifugal Gear Roller Flexible Impeller Effective: 1/1/2010 has a new name SHURflo Industrial The SHURflo product line is a world
More informationCentrifugal Discharge Elevator. Product Catalog
Product Catalog Centrifugal Discharge Bucket Elevator Bucket Elevators are ideal for elevating a variety of bulk materials economically, efficiently and reliably. The two main type of Bucket Elevators
More informationGetting the Speed Right. Voith Variable Speed Fluid Couplings
Getting the Speed Right. Voith Variable Speed Fluid Couplings 1 Voith sets the standards in the energy, oil & gas, paper, raw materials and transportation & automotive markets. Founded in 1867, Voith employs
More informationTechnical Details Coiler head / spool diameter Spool weight (depending on type of spool winding axle)
MOTROL 500 Fig. 1 MOTROL 500 Fig. 2 Coiler head RAPID 480SL Fig. 3 Spool winding axle Fig. 4 Label printer Fig. 5 Label Sample MOTROL 500 This motor driven coil and spool winder enables to wind materials
More informationINSTRUCTIONS. complete drawings to: or Fax to: (610)
INSTRUCTIONS How to Measure Coils mail complete drawings to: sales@usacoil.com or Fax to: (610) 296-9763 The * asterisk items are required to adequately provide pricing. ll other items are needed to fabricate
More informationN N O V A T I O N E F F I C I E N C Y Q U A L I T Y
N N O V A T I O N E F F I C I E N C Y Q U A L I T Y PS For more than 60 years the name Ruhrpumpen has been synonymous worldwide with innovation and reliability for pumping technology Ruhrpumpen is an innovative
More informationOpen Chassis Star-Delta Starter User Guide
Open Chassis Star-Delta Starter User Guide (7.5kW~90kW) V2.0.1 Contents 1 Safety information... 1 2 Technical Data... 2 3 Supply & Motor Connections & Circuit Diagrams... 5 4 Control Connections & Operation...
More informationMachinery Listings. Weaving Picanol. Airjet. Reference: 7256 Cost: 0 Terms: -
Machinery Listings Weaving Picanol Airjet Finatex International: Please ask for details at: marketing@finatexinternational.com Reference: 7224 Cost: 0 Terms: - Please consider: If prices or commissions
More informationLubrication & Maintenance Schedule
REMOVE DIRT AND SPILLAGE FROM AROUND THE CRUSHER. REMOVE DUST AND DIRT FROM CRUSHER FRAME SURFACES. REMOVE DUST AND DIRT FROM DRIVE MOTOR. CHECK FLUID LEVELS IN DIESEL ENGINE (IF EQUIPPED). REFER TO ENGINE
More information2. Fault Code Procedures
2. Fault Procedures Section Contents Page Introduction.......................2-3 Section 2 Entry Flow Chart...........2-4 Paper Jam Entry Flow Chart..........2-5 Status Fault s Table 1. Status Entry Table
More informationApresentação Técnica. Compressores Estacionários CPG. People. Footer Passion. Performance.
Apresentação Técnica Compressores Estacionários CPG People. Footer Passion. Performance. 1. Date CPG 380 450 480 hp Applications Every industry needs compressed air Approximately 60-70% of the manufacturing
More informationVALIADIS S.A. HELLENIC MOTORS
Explosion proof motors MAK 56-250 (MAKe 63-250) series Groups IIB and IIC Ex db / Ex db e (EPL) executions Gb or Ex tb IIIC (EPL) Db II 2 G, II 2D, 2GD SAFETY INSTRUCTIONS Safety Instructions MAK and MAKe
More informationINSTRUCTION MANUAL INDUSTRIAL PERISTALTIC PUMPS MODEL RBT-70
INSTRUCTION MANUAL INDUSTRIAL PERISTALTIC PUMPS MODEL RBT-70 This manual forms an integral part of the pump and must accompany it until its demolition. The series FMP peristaltic pump is a machine destined
More informationDrive Fundamentals. Motor Control Bootcamp May 15-18, Copyright 2015 Rockwell Automation, Inc. All Rights Reserved. PUBLIC CO900H
- 5058-CO900H Drive Fundamentals Motor Control Bootcamp May 15-18, 2017 How are these Devices Related? Variable frequency drives Variable speed drives Variable speed controllers Adjustable frequency drives
More informationFloor Opening is Chute Diameter + 4"
Cap Vent Body A basic chute contains: 3'-0" Vent Height Curbed Flashing Intake sections with a specified door installed in unit and a spiral section to make up the balance of the floor height. Roof Angle
More informationHitachi America, Ltd.
Hitachi America, Ltd. RCU Series Regenerative Converter Unit Instruction Manual NOTE: REFER ALSO TO APPLICABLE INVERTER INSTRUCTION MANUAL Manual Number: HAL1057A May 2010 After reading this manual, keep
More informationProcess interlocking Multi Rotation Lock (MRL)
Process interlocking Process interlocking prevents human error by guiding the operator through a predefined operating sequence. Valve interlocks are based on the principle of the exchange of unique keys,
More informationCeraControl. Temperature Programmer User Handbook.
CeraControl Temperature Programmer User Handbook www.potterycrafts.co.uk See separate handbook for Installation Instructions Issue: 1.01 CeraControl Copyright User 2014 Handbook Potterycrafts Ltd. Date:
More informationFortis Wind Energy Systems Market List Price 2018
Fortis Wind Energy Systems Market List Price 2018 No part of this document may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording,
More informationManual. Pneumatic Drilling Unit Series BEP 22 SK. Read this manual before installation and commissioning of the product. Keep for future reference.
EN Manual Pneumatic Drilling Unit Series BEP 22 SK Read this manual before installation and commissioning of the product. Keep for future reference. MAN027 - Manual BEP 22 SK, EN, Rev. 01.doc Table of
More informationMECHANICAL CYLINDERS Operating Instructions
SW3001EN.1 MECHANICAL CYLINDERS Operating Instructions Sweden Int +46 372 265 00 info@swedrive.se Vat.no SE556145631901 138-4551 1 Table of Contents 1. Health and Safety... 3 1.1. Notice about safety...
More informationPRODUCTS: POWER SUPPLY
PRODUCTS: POWER SUPPLY Impact Lighting Inc. All rights reserved. Impact Lighting Inc. Reserves the right to change specifications without notice. 138 POWER SUPPLY 15W AC-DC [12V/1.25A] UNIVERSAL POWER
More informationThe MiniMax conveyor car wash represents a breakthrough in car washing. The MiniMax
The MiniMax conveyor car wash represents a breakthrough in car washing. The MiniMax delivers: 1. A wash quality comparable to high end gantry machines; 2. At a cheaper price; 3. Washing up to 3 times as
More informationRECOMMENDED SCREW PUMP SPECIFICATION
RECOMMENDED SCREW PUMP SPECIFICATION SECTION OPEN SCREW PUMP PART 1 GENERAL 1.01 SUMMARY A. Section Includes: Open screw pump assemblies and appurtenances. B. Related Sections: 1. Section - FRP Screw Pump
More information