UNIT-I ALTERNATORS PART-A
|
|
- Holly Lang
- 5 years ago
- Views:
Transcription
1 UNIT-I ALTERNATORS 1. What principle is used in Alternators? 2. What are the requirements of an alternator? 3. Mention the types of alternator rotor. 4. What is hunting in alternators? 5. What are the two types of alternator? 6. Name the types of armature winding? 7. Write the formula to calculate the synchronous speed of alternator. 8. Define slot angle. 9. What are the methods obtaining sine wave in alternator? 1o. Write the expression for EMF equation of alternator? 11. State different methods of cooling of alternator? 12. Write the relation between frequency, speed and number of poles. 13. Derive the relation between frequency and number of poles. 14. What is pitch factor? 15. What is distribution factor or breadth factor? PART B 1. Explain the stator and rotor constructional details of salient pole alternator? 2. Derive an expression for EMF of alternator taking into account the pitch factor and distribution factor? 3. Explain the methods of obtaining sine wave in salient pole alternators with neat sketches? 4. Explain with a neat sketch the constructional details of turbo alternator? 5. Describe hydrogen cooling of alternators and state its advantages. 6. Explain with sketches the different methods of cooling of alternators? 1
2 UNIT-II PERFORMANCE OF AN ALTERNATOR PART A 1. What is effective armature resistance? 2. What is leakage reactance? 3. What is synchronous reactance? 4. What is armature reactance? 5. What is synchronous impedance? 6. What is armature reaction in alternator? 7. Mention the methods used for synchronization? 8. What is meant by voltage regulation? 9. Write the expression for no load emf. 1O. Write the formula for regulation. 11. Write the formula for synchronizing power, synchronizing torque and synchronizing current. 12. What is synchronizing of alternators? 13. Mention the methods used to find out the regulation of alternators. 14. Name the two methods for determining the voltage regulation of alternator. 15. State two seasons for voltage drop in alternator. 1. Explain the EMF method (or) synchronous impedance method of predetermining the voltage regulation of an alternator. 2. With schematic diagram explain briefly the synchronizing of two 3 phase alternators by dark lamp method. 3. Explain briefly the synchronizing of two three phase alternators by bright lamp method. 4. Explain the armature reaction in alternator for various power factor loads. 5. Describe the synchronizing of two three phase alternators by synchroscope method. 6. Explain in detail the ampere turn method of calculating the regulation in an alternator. 2
3 UNIT-III THREE PHASE INDUCTION MOTOR 1. Mention the types of 3 phase induction motor. 2. Define slip in induction motor. 3. Write the expression for the slip in induction motor. 4. Write the relation between the slip frequency. 5. Write the conditions to obtain maximum starting torque. 6. Write the condition to obtain maximum torque at running condition? 7. What type of starter is suitable for three phase slip ring induction motor? 8. Name the methods of speed control of 3 phase induction motor. 9. What is meant by cogging in 3 phase induction motor and how it is prevented? 1O.What is meant by crawling in induction motor? 11. Define slip in induction motor. 12. Draw the approximate equivalent circuit of induction motor. 13. Why is the speed control by rotor resistance method not suitable for 3 phase squirrel cage induction motor? 14. What is meant by cascading of two induction motors and state four possible speeds in terms of poles and frequency? 15. Mention the starters used for 3 phase induction motor. 1. Explain the working of an induction motor. 2. Explain with sketches the constructional details of slip ring induction motor. 3. Explain with sketch the constructional details of 3phase induction motor. 4. Explain the slip torque characteristics of a 3 phase slip ring induction motor and show the influence of rotor resistance on this characteristic. 5. How are equivalent circuit constants of an induction motor determined for assumed slip? 6. Explain the Rotor-resistance method of speed control an induction motor. 7. Explain with a neat diagram the working of a star delta starter and mention its merits and demerits. 3
4 8. Explain with a neat sketch the working of an auto transformer starter. Bring out merits and demerits. UNIT-IV SINGLE PHASE INDUCTION MOTOR 1. At what speed does synchronous motor run? 2. Name the machine, which works only at synchronous speed. 3. Name the four methods of starting a synchronous motor. 4. What is the use of damper winding in a synchronous motor? 5. What will be the power factor when the synchronous motor is over excited? 6. What will be the power factor when the synchronous motor is under excited? 7. Single phase induction motor is not self starting, why? 8. What are the main parts of split phase induction motor? 9. Name the four methods of starting a synchronous motor. 1O.What is V curve and inverted V curve? 11. State the application of synchronous motor. 12. Mention the types of 1 phase induction motor. 13. Mention the types of capacitor type induction motor. 14. State the applications of split phase induction motor. 15. State the applications of capacitor start motor. 1. Explain the principle of operation of synchronous motor. 2. Explain any two methods of synchronous motor. 3. Explain v curve and inverted v curve of synchronous motor. 4. Explain the double field revolving theory for single phase induction motor. 5. Explain the construction and working principle of split phase induction motor. 6. Explain the construction and principle of operation of capacitor start Induction motor and state its applications. 7. Explain the construction and principle of capacitor start and capacitor run induction motor. 4
5 UNIT-V MAINTENANCE OF AC MACHINES 1. What is single phasing? 2. What is meant by Degreasing? 3. A motor fails to start, state any two causes. 4. How will you check unbalancing in rotor? 5. Mention any two starter troubles. 6. State any two qualities of good transformer oil. 7. Why B.D.V. test is conducted on transformer oil? 8. What is drying out? 9. Name the different types of transformer oil purifiers. 1O.What is a Buchholz relay? 11. Name the tests to be carried out for testing the distribution transformer. 12. State any two causes of the transformer noise. 13. Define earthing. 14. What is the use of earthing? 15. State the methods of earthing. 1. What do you mean by single phasing? Explain how single phasing is prevented using current operated relays. 2. What are the causes of noise and vibration while running of a induction motor? 3. What are the checks to be done before commissioning of an induction motor? 4. Explain the common troubles that are occurring in induction motor starters and how they are rectified. 5. Explain the effect of unbalanced supply on the performance of induction motor. 6. Explain in detail the dismantling procedure for distribution transformers. 7. Explain in detail the working of Buchholz relay. 8. Explain about transformer troubles and their causes. 9. Explain with neat sketch about the measurement of earth resistance. 5
DEPARTMENT OF ELECTRICAL AND ELECTRONICS ENGINEERING
DEPARTMENT OF ELECTRICAL AND ELECTRONICS ENGINEERING QUESTION BANK 16EET41 SYNCHRONOUS AND INDUCTION MACHINES UNIT I SYNCHRONOUS GENERATOR 1. Why the stator core is laminated? 2. Define voltage regulation
More informationDEPARTMENT OF EI ELECTRICAL MACHINE ASSIGNMENT 1
It is the mark of an educated mind to be able to entertain a thought without accepting it. DEPARTMENT OF EI ELECTRICAL MACHINE ASSIGNMENT 1 1. Explain the Basic concepts of rotating machine. 2. With help
More information2-marks question bank UNIT I - TRANSFORMERS UNIT II: AC MACHINES
2-marks question bank UNIT I - TRANSFORMERS 1. What is all day efficiency? 2. What are the applications of auto transformers? 3. Why transformer rating is expressed in KVA? 4. Does transformer draw any
More informationScheme - I. Sample Question Paper
Program Name Program Code Course Title Sample Question Paper : Diploma in Industrial Electronics : IE : Electrical Machines and Transformers Max. Marks : 70 Time : 3 Hrs. Q1. ATTEMPT ANY FIVE OF THE FOLLOWING.
More informationSHRI ANGALAMMAN COLLEGE OF ENGINEERING AND TECHNOLOGY (An ISO 9001:2008 Certified Institution) SIRUGANOOR, TIRUCHIRAPPALLI
SHRI ANGALAMMAN COLLEGE OF ENGINEERING AND TECHNOLOGY (An ISO 9001:2008 Certified Institution) SIRUGANOOR, TIRUCHIRAPPALLI 621 105 DEPARTMENT OF ELECTRICAL AND ELECTRONICS ENGINEERING EE1205 - ELECTRICAL
More information2014 ELECTRICAL TECHNOLOGY
SET - 1 II B. Tech I Semester Regular Examinations, March 2014 ELECTRICAL TECHNOLOGY (Com. to ECE, EIE, BME) Time: 3 hours Max. Marks: 75 Answer any FIVE Questions All Questions carry Equal Marks ~~~~~~~~~~~~~~~~~~~~~~~~~~
More informationContents. Review of Electric Circuitd. Preface ;
Preface ; Chapter 1 Review of Electric Circuitd 1.1 Introduction, 1 1.2 Direct Circuit Current, 1 1.2.1 Voltage, 3 1.2.2 Power, 3 1.2.3 Ohm's Law, 5 1.2.4 KirchhofTs Laws, 5 1.2.4.1 Kirchhoff s Current
More informationFATIMA MICHAEL COLLEGE OF ENGINEERING & TECHNOLOGY Senkottai Village, Madurai Sivagangai Main Road, Madurai
Department of Mechanical Engineering QUESTION BANK SUBJECT NAME: ELECTRICAL DRIVES AND CONTROL YEAR / SEM: II / III UNIT I INTRODUCTION PART-A (2 MARKS) 1. Define Drives 2. Define Electric Drives. 3. What
More informationRegulation: R16 Course & Branch: B.Tech EEE
SIDDHARTH GROUP OF INSTITUTIONS :: PUTTUR Siddharth Nagar, Narayanavanam Road 517583 QUESTION BANK (Descriptive) Subject with Code : Electrical Machines-II (16EE215) Regulation: R16 Course & Branch: B.Tech
More informationSIDDHARTH GROUP OF INSTITUTIONS :: PUTTUR
SIDDHARTH GROUP OF INSTITUTIONS :: PUTTUR Siddharth Nagar, Narayanavanam Road 517583 QUESTION BANK (DESCRIPTIVE) Subject with Code : ET(16EE212) Year & Sem: II-B.Tech & II-Sem UNIT I DC GENERATORS Course
More informationVALLIAMMAI ENGINEERING COLLEGE MECHANICAL ENGINEERING ANNA UNIVERSITY CHENNAI II YEAR MECH / III SEMESTER EE6351 - ELECTRICAL DRIVES AND CONTROL (REGULATION 2013) UNIT I INTRODUCTION PART-A (2 MARKS) 1.
More informationUnit III-Three Phase Induction Motor:
INTRODUCTION Unit III-Three Phase Induction Motor: The three phase induction motor runs on three phase AC supply. It is an ac motor. The power is transferred by means of induction. So it is also called
More informationR13 SET - 1. b) Describe different braking methods employed for electrical motors. [8M]
Code No:RT32026 R13 SET - 1 III B. Tech II Semester Regular Examinations, April - 2016 POWER SEMICONDUCTOR DRIVES (Electrical and Electronics Engineering) Time: 3 hours Maximum Marks: 70 Note: 1. Question
More informationSYLLABUS 1. SYNCHRONOUS GENERATOR 9 2. SYNCHRONOUS MOTOR 8
SYLLABUS 1. SYNCHRONOUS GENERATOR 9 Constructional details Types of rotors emf equation Synchronous reactance Armature reaction Voltage regulation EMF, MMF, ZPF and A.S.A methods Synchronizing and parallel
More informationDC CIRCUITS ELECTROMAGNETISM
DC CIRCUITS 1. State and Explain Ohm s Law. Write in brief about the limitations of Ohm s Law. 2. State and explain Kirchhoff s laws. 3. Write in brief about disadvantages of series circuit and advantages
More informationR07 SET - 1
R07 SET - 1 II B. Tech II Semester Supplementary Examinations April/May 2013 ELECTRICAL MACHINES - II (Electrical and Electronics Engineering) Time: 3 hours Max. Marks: 80 Answer any FIVE Questions All
More informationGROUP OF INSTITUTIONS :: PUTTUR UNIT I SINGLE PHASE TRANSFORMERS
SIDDHARTH GROUP OF INSTITUTIONS :: PUTTUR Siddharth Nagar, Narayanavanam Road 517583 QUESTION BANK (Descriptive) Subject with Code : Electrical Machines-II (16EE215) Course & Branch: B.Tech EEE Regulation:
More informationQUESTION BANK SPECIAL ELECTRICAL MACHINES
SEVENTH SEMESTER EEE QUESTION BANK SPECIAL ELECTRICAL MACHINES TWO MARK QUESTIONS 1. What is a synchronous reluctance 2. What are the types of rotor in synchronous reluctance 3. Mention some applications
More informationST. ANNE S COLLEGE OF ENGINEERING AND TECHNOLOGY 9001:2015 CERTIFIED INSTITUTION) ANGUCHETTYPALAYAM, PANRUTI
ST. ANNE S COLLEGE OF ENGINEERING AND TECHNOLOGY (AN ISO 9001:2015 CERTIFIED INSTITUTION) ANGUCHETTYPALAYAM, PANRUTI 607 110. EE6504 ELECTRICAL MACHINES - II UNIT I SYNCHRONOUS GENERATOR PART A 1. What
More informationB.E-EEE(Marine) Batch 7. Subject Code EE1704 Subject Name Special Electrical Machines
Course B.E-EEE(Marine) Batch 7 Semester VII Subject Code EE1704 Subject Name Special Electrical Machines Part-A Unit-1 1 List the applications of synchronous reluctance motors. 2 Draw the voltage and torque
More informationINSTITUTE OF AERONAUTICAL ENGINEERING Dundigal, Hyderabad
INSTITUTE OF AERONAUTICAL ENGINEERING Dundigal, Hyderabad - 500 043 MECHANICAL ENGINEERING ASSIGNMENT Name : Electrical and Electronics Engineering Code : A40203 Class : II B. Tech I Semester Branch :
More informationELECTRICAL MACHINES. Theory and Practice. M.N. Bandyopadhyay
ELECTRICAL MACHINES Theory and Practice M.N. Bandyopadhyay ELECTRICAL MACHINES Theory and Practice M.N. Bandyopadhyay Director National Institute of Technology Kurukshetra Delhi-110092 2014 ELECTRICAL
More informationUnit-II Synchronous Motor
Unit-II Synchronous Motor CONSTRUCTION OF THREE PHASE SYNCHRONOUS MOTOR PRINCIPLE OF OPERATION Prepared By P.Priyadharshini Ap/EEE - 1 - Note: 1. The average torque exerted on the rotor of synchronous
More informationAC MOTOR TYPES. DESCRIBE how torque is produced in a single-phase AC motor. EXPLAIN why an AC synchronous motor does not have starting torque.
Various types of AC motors are used for specific applications. By matching the type of motor to the appropriate application, increased equipment performance can be obtained. EO 1.5 EO 1.6 EO 1.7 EO 1.8
More informationSIDDHARTH GROUP OF INSTITUTIONS :: PUTTUR Siddharth Nagar, Narayanavanam Road QUESTION BANK (DESCRIPTIVE)
SIDDHARTH GROUP OF INSTITUTIONS :: PUTTUR Siddharth Nagar, Narayanavanam Road 517583 QUESTION BANK (DESCRIPTIVE) Subject with Code : PSD (16EE223) Year & Sem: III-B.Tech & II-Sem Course & Branch: B.Tech
More informationDHANALAKSHMI SRINIVASAN COLLEGE OF ENGINEERING AND TECHNOLOGY MAMALLAPURAM, CHENNAI
DHANALAKSHMI SRINIVASAN COLLEGE OF ENGINEERING AND TECHNOLOGY MAMALLAPURAM, CHENNAI -603104 DEPARTMENT OF ELECTRICAL AND ELECTRONICS ENGINEERING QUESTION BANK VII SEMESTER EE6501-Power system Analysis
More informationSt.MARTIN S ENGINEERING COLLEGE Dhulapally, Secunderabad
St.MARTIN S ENGINEERING COLLEGE Dhulapally, Secunderabad-500 014 Subject: STATIC DRIVES Class : EEE III TUTORIAL QUESTION BANK Group I QUESTION BANK ON SHORT ANSWER QUESTION UNIT-I 1 What is meant by electrical
More informationStator rheostat, Autotransformer Star to Delta starter and rotor resistance starter.
UNIT-IV 1.What are the types of starters? Stator rheostat, Autotransformer Star to Delta starter and rotor resistance starter. 2. List out the methods of speed control of cage type 3-phase induction motor?
More informationEE6401 ELECTRICAL MACHINES I UNIT I: MAGNETIC CIRCUITS AND MAGNETIC MATERIALS PART: A 1. Define EMF and MMF. 2. Name the main magnetic quantities with their symbols having the following units: Webers,
More informationEE6401 ELECTRICAL MACHINES I UNIT I: MAGNETIC CIRCUITS AND MAGNETIC MATERIALS PART: A 1. Define EMF and MMF. 2. Name the main magnetic quantities
EE6401 ELECTRICAL MACHINES I UNIT I: MAGNETIC CIRCUITS AND MAGNETIC MATERIALS PART: A 1. Define EMF and MMF. 2. Name the main magnetic quantities with their symbols having the following units: Webers,
More informationESO 210 Introduction to Electrical Engineering
ESO 210 Introduction to Electrical Engineering Lectures-37 Polyphase (3-phase) Induction Motor 2 Determination of Induction Machine Parameters Three tests are needed to determine the parameters in an induction
More informationINSTITUTE OF AERONAUTICAL ENGINEERING (Autonomous) Dundigal, Hyderabad DEPARTMENT OF ELECTRICAL AND ELECTRONICS ENGINEERING
Course Name Course Code Class Branch INSTITUTE OF AERONAUTICAL ENGINEERING (Autonomous) Dundigal, Hyderabad - 500 0 DEPARTMENT OF ELECTRICAL AND ELECTRONICS ENGINEERING : Static Drives : A60225 : III -
More informationElectrical Machines -II
Objective Type Questions: 1. Basically induction machine was invented by (a) Thomas Alva Edison (b) Fleming (c) Nikola Tesla (d) Michel Faraday Electrical Machines -II 2. What will be the amplitude and
More informationCOLLEGE OF ENGINEERING DEPARTMENT OF ELECTRICAL AND ELECTRONICS ENGINEERING QUESTION BANK SUBJECT CODE & NAME : EE 1001 SPECIAL ELECTRICAL MACHINES
KINGS COLLEGE OF ENGINEERING DEPARTMENT OF ELECTRICAL AND ELECTRONICS ENGINEERING QUESTION BANK SUBJECT CODE & NAME : EE 1001 SPECIAL ELECTRICAL MACHINES YEAR / SEM : IV / VII UNIT I SYNCHRONOUS RELUCTANCE
More informationSYNCHRONOUS GENERATOR (ALTERNATOR)
i SYLLABUS osmania university UNIT - I SYNCHRONOUS MACHINES Constructional Details, Types of Windings, Winding Factors, EMF Equation, Fractional Pitch and Fractional Slot Windings, Suppression of Harmonics
More informationUNIT I SYNCHRONOUS GENERATOR PART-A
1. What is an alternator? UNIT I SYNCHRONOUS GENERATOR PART-A An alternator or AC generator is a synchronous machine which converts mechanical energy into electrical energy and produces alternating emf.
More informationKINGS COLLEGE OF ENGINEERING DEPARTMENT OF ELECTRICAL AND ELECTRONICS ENGINEERING QUESTION BANK
KINGS COLLEGE OF ENGINEERING DEPARTMENT OF ELECTRICAL AND ELECTRONICS ENGINEERING QUESTION BANK NAME OF THE SUBJECT: EE 1001 SPECIAL ELECTRICAL MACHINES YEAR / SEM : IV / VII UNIT- I AC COMMUTATOR MOTORS
More informationVALLIAMMAI ENGINEERING COLLEGE
VALLIAMMAI ENGINEERING COLLEGE SRM Nagar, Kattankulathur 603 203. DEPARTMENT OF ELECTRICAL AND ELECTRONICS ENGINEERING Question Bank EE6401 ELECTRICAL MACHINES I UNIT I: MAGNETIC CIRCUITS AND MAGNETIC
More informationQuestion Bank. Write the relationship between speed and frequency for 3 phase induction 3 motor.
Course B.E(EEE-Marine) Batch 17 Semester VII Subject code EE1706 subject Name Marine Electrical System Design & Layout PART-A Marks: 2 UNIT-1 Question Bank 1 Write the comparison of A.C. over D.C.? 2 Why
More informationQuestion Bank ( ODD)
Programme : B.E Question Bank (2016-2017ODD) Subject Semester / Branch : EE 6703 SPECIAL ELECTRICAL MACHINES : VII-EEE UNIT - 1 PART A 1. List the applications of synchronous reluctance motors. 2. Draw
More informationStarting of Induction Motors
1- Star Delta Starter The method achieved low starting current by first connecting the stator winding in star configuration, and then after the motor reaches a certain speed, throw switch changes the winding
More informationEE6351 ELECTRIC DRIVES AND CONTROL UNIT-1 INTRODUTION
EE6351 ELECTRIC DRIVES AND CONTROL UNIT-1 INTRODUTION 1. What is meant by drive and electric drive? Machines employed for motion control are called drives and may employ any one of the prime movers for
More informationUnit 32 Three-Phase Alternators
Unit 32 Three-Phase Alternators Objectives: Discuss the operation of a three-phase alternator. Explain the effect of rotation speed on frequency. Explain the effect of field excitation on output voltage.
More informationShort questions and answers. EE1251 Electrical Machines II
Short questions and answers EE1251 Electrical Machines II 1. Why almost all large size Synchronous machines are constructed with rotating field system type? The following are the principal advantages of
More information694 Electric Machines
694 Electric Machines 9.1 A 4-pole wound-rotor induction motor is used as a frequency changer. The stator is connected to a 50 Hz, 3-phase supply. The load is connected to the rotor slip rings. What are
More informationAPGENCO/APTRANSCO Assistant Engineer Electrical Previous Question Papers Q.1 The two windings of a transformer is conductively linked. inductively linked. not linked at all. electrically linked. Q.2 A
More informationSub:EE6604/DESIGN OF ELECTRICAL MACHINES Unit V SYNCHRONOUS MACHINES. 2. What are the two type of poles used in salient pole machines?
SRI VIDYA COLLEGE OF ENGINEERING & TECHNOLOGY DEPARTMENT OF EEEE QUESTION BANK Sub:EE6604/DESIGN OF ELECTRICAL MACHINES Unit V SYNCHRONOUS MACHINES 1. Name the two types of synchronous machines. 1. Salient
More informationDHANALAKSHMI COLLEGE OF ENGINEERING MANIMANGALAM. TAMBARAM, CHENNAI B.E. ELECTRICAL AND ELECTRONICS ENGINEERING
DHANALAKSHMI COLLEGE OF ENGINEERING MANIMANGALAM. TAMBARAM, CHENNAI B.E. ELECTRICAL AND ELECTRONICS ENGINEERING V SEMESTER EE2305 ELECTRICAL MACHINES II LABORATORY LABORATORY MANUAL 1 CONTENT S. No. Name
More informationCircuit Diagram For Speed Control Of Slip Ring Induction Motor
Circuit Diagram For Speed Control Of Slip Ring Induction Motor A wound-rotor motor is a type of induction motor where the rotor windings are Compared to a squirrel-cage rotor, the rotor of the slip ring
More information(d) None of the above.
Dr. Mahalingam College of Engineering and Technology, Pollachi-3 (An Autonomous Institution affiliated to Anna niversity) CCET II (2016 Regulation) Name of Programme: B.E. (EEE) Course Code & Course Title:
More informationThe Wound-Rotor Induction Motor Part I
Experiment 1 The Wound-Rotor Induction Motor Part I OBJECTIVE To examine the construction of the three-phase wound-rotor induction motor. To understand exciting current, synchronous speed and slip in a
More informationEEE3441 Electrical Machines Department of Electrical Engineering. Lecture. Introduction to Electrical Machines
Department of Electrical Engineering Lecture Introduction to Electrical Machines 1 In this Lecture Induction motors and synchronous machines are introduced Production of rotating magnetic field Three-phase
More informationB. Tech Degree II Semester Examination in Polymer Science and
BT PSRT 9 14 PTF 123 MECHANICAL ENGINEERING PART - A (Answer any FIVE questions) 9) (5 x 5 = 25) What are the general classification of engineering materials? Give three examples for each group. What are
More informationST.ANNE S COLLEGE OF ENGINEERING AND TECHNOLOGY ANGUCHETTYPALAYAM, PANRUTI
ST.ANNE S COLLEGE OF ENGINEERING AND TECHNOLOGY ANGUCHETTYPALAYAM, PANRUTI 607106. QUESTION BANK DECEMBER 2017 - JUNE 2018 / EVEN SEMESTER BRANCH: EEE YR/SEM: II/IV BATCH: 2016-2020 SUB CODE/NAME: EE6401
More informationPart- A Objective Questions (10X1=10 Marks)
Dr. Mahalingam College of Engineering and Technology, Pollachi-3 (An Autonomous Institution) CCET 3(2016Regulation) Name of Programme: B.E. (EEE) Course Code&Course Title: 16EET41 & Synchronous & Induction
More informationSQA Advanced Unit specification: general information
SQA Advanced Unit specification: general information Unit title: Electrical Machine Principles Unit code: HT83 47 Superclass: XJ Publication date: August 2017 Source: Scottish Qualifications Authority
More informationDHANALAKSHMI COLLEGE OF ENGINEERING DEPARTMENT OF MECHANICAL ENGINEERING ME 6351 ELECTRICAL DRIVES AND CONTROL UNIVERSITY QUESTIONS AND ANSWERS
DHANALAKSHMI COLLEGE OF ENGINEERING DEPARTMENT OF MECHANICAL ENGINEERING ME 6351 ELECTRICAL DRIVES AND CONTROL UNIVERSITY QUESTIONS AND ANSWERS 1) What is the Necessity of starter? UNIT 3 Two Marks Both
More informationLecture 20: Stator Control - Stator Voltage and Frequency Control
Lecture 20: Stator Control - Stator Voltage and Frequency Control Speed Control from Stator Side 1. V / f control or frequency control - Whenever three phase supply is given to three phase induction motor
More informationPretest Module 21 Unit 4 Single-Phase Motors
Pretest Module 21 Unit 4 Single-Phase Motors 1. What are the four main components of a single-phase motor? Rotor, stator, centrifugal switch, end bells and bearings 2. How is a rotating field created in
More informationUNIT I D.C. MACHINES PART A. 3. What are factors on which hysteresis loss? It depends on magnetic flux density, frequency & volume of the material.
EE6352-ELECTRICAL ENGINEERING AND INSTRUMENTATION UNIT I D.C. MACHINES PART A 1. What is prime mover? The basic source of mechanical power which drives the armature of the generator is called prime mover.
More informationElectrical Machine Design Unit I 2 marks question and answers
Electrical Machine Design Unit I 2 marks question and answers 1. What are the considerations to be made while designing a electrical machines? 1. Cost 2. Durability 3. Compliance with the performance specification
More information10. Starting Method for Induction Motors
10. Starting Method for Induction Motors A 3-phase induction motor is theoretically self starting. The stator of an induction motor consists of 3-phase windings, which when connected to a 3-phase supply
More informationTWO MARK QUESTIONS-ANSWERS
TWO MARK QUESTIONS-ANSWERS DEPARTMENT: MECH SEMESTER : III SUBJECT CODE: ME2205 SUBJECT NAME: ELECTRIC DRIVES & CONTROL 1. Define Drive and Electric Drive. Drive: A particular system employed for motion
More informationUNIT III. AC Machines
SIDDHARTH GROUP OF INSTITUTIONS :: PUTTUR Siddharth Nagar, Narayanavanam Road 517583 QUESTION BANK (DESCRIPTIVE) Subject with Code : (15A01301) Year & Sem: II-B.Tech & I-Sem UNIT III Course & Branch: B.Tech-CE
More informationTo discover the factors affecting the direction of rotation and speed of three-phase motors.
EXPERIMENT 12 Direction of Rotation of Three-Phase Motor PURPOSE: To discover the factors affecting the direction of rotation and speed of three-phase motors. BRIEFING: The stators of three-phase motors
More informationPower Factor Improvement
Power Factor Improvement The following devices and equipments are used for Power Factor Improvement. Static Capacitor Synchronous Condenser Phase Advancer 1. Static Capacitor We know that most of the industries
More informationAE105 PRINCIPLES OF ELECTRICAL ENGINEERING JUNE 2014
Q.2 a. Explain in detail eddy current losses in a magnetic material. Explain the factors on which it depends. How it can be reduced? IETE 1 b. A magnetic circuit with a single air gap is shown in given
More informationSri Satya Sai University Of Technology And Medical Sciences, Sehore(M.P)
DEE-401.ELECTRICAL MACHINE- II UNIT: I Three phase Induction Motor - Production of rotating magnetic field, principle, construction and types of induction motors. Equivalent circuit, torque equation, torque-slip
More informationELECTRIC MACHINES OPENLAB 0.2 kw
THIS SYSTEM IS A COMPLETE SET OF COMPONENTS AND MODULES SUITABLE FOR ASSEMBLING THE ROTATING ELECTRIC MACHINES, BOTH FOR DIRECT CURRENT AND FOR ALTERNATING CURRENT. STUDENTS CAN PERFORM A CRITICAL AND
More informationLoad Test On 3 Phase Slip Ring Induction Motor Lab Manual
Load Test On 3 Phase Slip Ring Induction Motor Lab Manual Electrical engineering machine lab manual. Brake test on three phase squirrel cage induction motor. No-load &, blocked rotor tests on three phase
More informationDev Bhoomi Institute Of Technology LABORATORY Department of Electrical And Electronics Engg. Electro-mechanical Energy Conversion II
REV. NO. : REV. DATE : PAGE: 1 Electro-mechanical Energy Conversion II 1. To perform no load and blocked rotor tests on a three phase squirrel cage induction motor and determine equivalent circuit. 2.
More informationGENERATION, CONVERSION, OR DISTRIBUTION OF ELECTRIC POWER
XXXX H02 GENERATION, CONVERSION, OR DISTRIBUTION OF ELECTRIC POWER XXXX CONTROL OR REGULATION OF ELECTRIC MOTORS, GENERATORS, OR DYNAMO-ELECTRIC CONVERTERS; CONTROLLING TRANSFORMERS, REACTORS OR CHOKE
More informationEXPERIMENT 2 THREE PHASE INDUCTION MOTOR, PART 1
University f Jordan School of Engineering Department of Mechatronics Engineering Electrical Machines Lab Eng. Osama Fuad Eng. Nazmi Ashour EXPERIMENT 2 THREE PHASE INDUCTION MOTOR, PART 1 OBJECTIVES To
More informationLab Electrical Power Engineering I
INSTITUT FÜR ELEKTRISCHE MASCHINEN RHEINISCH-WESTFÄLISCHE TECHNISCHE HOCHSCHULE AACHEN Lab Electrical Power Engineering I Test 3: Induction machine with squirrel cage rotor and slip ring rotor 1 Experiment
More informationJEPPIAAR ENGINEERING COLLEGE DEPARTMENT OF ELECTRICAL AND ELECTRONICS ENGINEERING
JEPPIAAR ENGINEERING COLLEGE DEPARTMENT OF ELECTRICAL AND ELECTRONICS ENGINEERING VISION OF INSTITUTION To build Jeppiaar Engineering College as an institution of academic excellence in technology and
More information9. Examples of hydro energy conversion
9. Examples of hydro energy conversion VATech Hydro, Austria Prof. A. Binder 9/1 Variable speed pump storage power plant Prof. A. Binder 9/2 Conventional pump storage power plant with synchronous motor-generators
More informationTYPES OF SINGLE PHASE INDUCTION MOTOR EBOOK
28 March, 2018 TYPES OF SINGLE PHASE INDUCTION MOTOR EBOOK Document Filetype: PDF 275.98 KB 0 TYPES OF SINGLE PHASE INDUCTION MOTOR EBOOK So this is the reason of using capacitor in the single phase induction
More informationPAC TRAINING PUMP MOTORS
PAC TRAINING PUMP MOTORS 1 Basics Magnet supported from above N S N S Since unlike poles repel each other, the magnet will rotate Stationary Magnet 2 Basics N S Stationary Magnet 3 Basics N N S S Stationary
More informationElectrical Theory. Generator Theory. PJM State & Member Training Dept. PJM /22/2018
Electrical Theory Generator Theory PJM State & Member Training Dept. PJM 2018 Objectives The student will be able to: Describe the process of electromagnetic induction Identify the major components of
More informationSyllabus for the Trade of Electrician Duration : Six Month Second Semester Semester Code: ELE: SEM II
Syllabus for the Trade of Electrician Duration : Six Month Second Semester Semester Code: ELE: SEM II Week Trade practical No. 1-2 Different wave shapes of rectifiers and their values using C.R.O. Identification
More information2. Draw the speed-torque characteristics of dc shunt motor and series motor. (May2013) (May 2014)
UNIT 2 - DRIVE MOTOR CHARACTERISTICS PART A 1. What is meant by mechanical characteristics? A curve is drawn between speed-torque. This characteristic is called mechanical characteristics. 2. Draw the
More informationFachpraktikum Elektrische Maschinen. Theory of Induction Machines
Fachpraktikum Elektrische Maschinen Theory of Induction Machines Prepared by Arda Tüysüz January 2013 Fundamentals Induction machines (also known as asynchronous machines) are by far the most common type
More informationELECTRICAL INSTALLER THEORY EXAMINATION 21 June 2014 QUESTION AND ANSWER BOOKLET
Candidate Code No. EIN 08 For Board Use Only Result Date Int Result Date Int ELECTRICAL INSTALLER THEORY EXAMINATION 21 June 2014 QUESTION AND ANSWER BOOKLET INSTRUCTIONS READ CAREFULLY Time Allowed: Three
More informationSRI VIDYA COLLEGE OF ENGINEERING & TECHNOLOGY QUESTION BANK UNIT III EC6352-ELECTRICAL ENGINEERING AND INSTRUMENTATION UNIT III PART A
SRI VIDYA COLLEGE OF ENGINEERING & TECHNOLOGY QUESTION BANK UNIT III EC6352-ELECTRICAL ENGINEERING AND INSTRUMENTATION UNIT III PART A INDUCTION MOTORS 1. What are the 2 types of 3phase induction motor?
More informationDHANALAKSHMI SRINIVASAN INSTITUTE OF RESEARCH AND TECHNOLOGY SIRUVACHUR
DHANALAKSHMI SRINIVASAN INSTITUTE OF RESEARCH AND TECHNOLOGY SIRUVACHUR 621 113. DEPARTMENT OF ELECTRICAL AND ELECTRONICS ENGINEERING QUESTION BANK (PART B) YEAR/SEMESTER :III/V SUB CODE/SUB NAME : EE2302/ELECTRICAL
More informationDesign of Brushless Permanent-Magnet Machines. J.R. Hendershot Jr. T.J.E. Miller
Design of Brushless Permanent-Magnet Machines J.R. Hendershot Jr. T.J.E. Miller Contents 1 GENERAL INTRODUCTION l 1.1 Definitions and types of brushless motor 1 1.2 Commutation,. 4 1.3 Operation of 3-phase
More informationMEBS Utilities services M.Sc.(Eng) in building services Department of Electrical & Electronic Engineering University of Hong Kong
Tutorial 1) A 2900 RPM, 380V, 3 phase, 50Hz, 2 pole, delta connected induction motor has a stator resistance of 0.2 Ω. The rotor resistance referred to the stator is 0.3 Ω. The stator and rotor inductive
More informationELECTRICIAN S THEORY EXAMINATION 19 June 2010 QUESTION AND ANSWER BOOKLET
Candidate Code No. ET34 For Board Use Only Result Date Int Result Date Int ELECTRICIAN S THEORY EXAMINATION 19 June 2010 QUESTION AND ANSWER BOOKLET INSTRUCTIONS READ CAREFULLY Time Allowed: Three hours
More informationELECTRICAL ENGINEERING
131307 ELECTRICAL ENGINEERING AIM To expose the students to the concepts of various types of electrical machines and transmission and distribution of electrical power. OBJECTIVES To impart knowledge on
More informationAXIAL FLUX PERMANENT MAGNET BRUSHLESS MACHINES
AXIAL FLUX PERMANENT MAGNET BRUSHLESS MACHINES Jacek F. Gieras, Rong-Jie Wang and Maarten J. Kamper Kluwer Academic Publishers, Boston-Dordrecht-London, 2004 TABLE OF CONTENETS page Preface v 1. Introduction
More informationEE6351 ELECTRICAL DRIVES AND CONTROL UNIT 5 CONVENTIONAL AND SOLID STATE SPEED CONTROL OF A.C. DRIVES PART A
EE6351 ELECTRICAL DRIVES AND CONTROL UNIT 5 CONVENTIONAL AND SOLID STATE SPEED CONTROL OF A.C. DRIVES PART A 1. What are the different types of slip power control system? Kramer system, Scherbius system..
More informationComprehensive Technical Training
Comprehensive Technical Training For Sugar Mills Staff on Operation & Maintenance of Baggase Based HP Cogeneration System Schedule: 10 th July to 13 th July, 2017 A.C. GENERATOR Topics Covered. Introduction.
More informationUnit 34 Single-Phase Motors
Unit 34 Single-Phase Motors Objectives: Unit 34 Single-Phase Motors List the different types of split-phase motors. Discuss the operation of split-phase motors. Reverse the direction of rotation of a splitphase
More informationPHY 152 (ELECTRICITY AND MAGNETISM)
PHY 152 (ELECTRICITY AND MAGNETISM) ELECTRIC MOTORS (AC & DC) ELECTRIC GENERATORS (AC & DC) AIMS Students should be able to Describe the principle of magnetic induction as it applies to DC and AC generators.
More informationSingle Phase Induction Motors
Single Phase Induction Motors Prof. T. H. Panchal Asst. Professor Department of Electrical Engineering Institute of Technology Nirma University, Ahmedabad Introduction As the name suggests, these motors
More informationSingle Phase Induction Motor. Dr. Sanjay Jain Department Of EE/EX
Single Phase Induction Motor Dr. Sanjay Jain Department Of EE/EX Application :- The single-phase induction machine is the most frequently used motor for refrigerators, washing machines, clocks, drills,
More informationPretest Module 21 Units 1-3 AC Generators & Three-Phase Motors
Pretest Module 21 Units 1-3 AC Generators & Three-Phase Motors 1. What are the two main parts of a three-phase 2. Which part of a three-phase squirrel-cage induction motor is a hollow core? 3. What are
More informationScope for Electrical Machine Design. Objectives. Design and Engineering. Course Description. 23-Dec-16 DESIGN OF ELECTRICAL MACHINES AN OVERVIEW
SNS COLLEGE OF ENGINEERING (Accredited by NAAC-UGC with A Grade, Approved by AICTE, Recognized by UGC and Affiliated to Anna University, Chennai) COIMBATORE 641 107 DEPARTMENT OF ELECTRICAL AND ELECTRONICS
More informationMYcsvtu Notes
D.C. MACHINES 1 INTRODUCTION There are two types of d.c. machines (1) D.C. Generator. (2) D.C.Motor. D.C. MACHINES D.C. Generator D.C. Generator. The d.c. generator converts mechanical energy into electrical
More informationUnit III A.C. Machines Explain the construction of induction motor. General principle Construction Stator:
Unit III A.C. Machines - Principle of operation of 3-phase Induction Motor Torque, slips characteristics- Speed control methods Single-phase Induction motor starting methods Principle of operation of Alternators.
More information