DRAW FRAME LD2. Lakshmi Machine Works Limited offers the following products in the Combing System.

Transcription

1 COMBING SYSTEM

2 Lakshmi Machine Works Limited offers the following products in the Combing System. A) Draw Frame Non Autoleveller Draw Frame LD2 Autoleveller Draw Frame LDAZ The draw frame LD2 is a novel pre-assembled machine designed to produce sliver from different raw materials such as cotton, manmade fibres and blends, with unmatched quality at high delivery speed. Precise Autolevelling and high production are always the core functions of autoleveller draw frame LDAZ. B) Lap Former and Comber Lap Former LH15 Comber LK64 Z Comber LK69 Lap Former LH15 ensures excellent lap preparation for comber with optimum degree of parallelization. With delivery speed of up to 150 mpm (depends on raw material) the Lap Former LH15 ensures high production at low cost. Comber LK64 Z with a high speed of up to 500 npm, incorporated with MCDP PLUS technology for production up to 1.7 tons/day. Comber LK69, with PACT SETS THE PACE in the Combing Technology with a production of upto npm. The combing machinery is configured to meet the following requirements Elimination of short fibres Enhanced doubling and drafting Perfect coiling DRAW FRAME LD2 Delivery speed of up to 1,000 m/min (mechanical) 4 over 3 with pressure bar drafting system Integrated drafting unit over the coiler assembly ensures higher speed Delivery Can Size of 20 x45 /48, 24 x48 and 40 x48 Can changer for Can size up to 24 x48 Ergonomically designed creel for accommodating feed Cans up to 40 dia Increases the efficiency of downstream process by up to 10% Reduces manpower requirements

3 TECHNICAL DATA Material : Cotton, Man-made Fibres and Blends Staple length : 25 to 80 mm No. of deliveries : 2 Delivery speed : 1,000 mpm (mechanical) Drafting system : 4/3 spring loaded Feed sliver : Ne 0.08 to 0.24 Delivery sliver : Ne 0.08 to 0.24 Draft range : 4 to 11 Doublings : 4 to 8 fold Installed power : kw (40 w/o Can changer) kw (up to 24 with Can changer) Compressed air : 0.5 Nm 3 6 kg/cm 2 (With Can changer) 0.2 Nm 3 6 kg/cm 2 (w/o Can changer) Exhaust air : 0.4 m 3 /sec

4 LAP FORMER LH15 Production up to 520 kg/hr Average delivery speed of up to 150 m/min (depends on raw material) Minimum doffing time ensures higher efficiency and productivity PRO-IN control system for better lap preparation Belt drives for smoother and noiseless operation Ergonomically designed static creel for sliver feed User friendly touch screen display for better navigation Improved user friendliness in maintenance perspective TECHNICAL DATA Working speed : 150 m/min (avg.) (depends on raw material) Count of sliver fed : Ne 0.1 to 0.18 Draft : 1.2 to 2.26 Weight of feed : 90 to 165 g/m Creel / Ends up : up to 28 slivers Lap weight : 60 to 80 g/m Lap width : 300 mm Weight of laps : up to 25 kg Can dimension : up to 1,000 mm (40 ) dia. / up to 1,200 mm (48 ) ht. Compressed air : 4 Nm 3 6 bar Exhaust air : 0.7 m 3 /sec Total Installed Power : kw

5 COMBER LK64 Z Maximum speed up to 500 npm (technological) MCDP PLUS technology for production up to 1.7 tons/day New Combing Peripherals 3/3 Pneumatically loaded drafting system Specially profiled light weight aluminium alloy nippers Piecing assistance in drafting zone Modular construction TECHNICAL DATA Nips per minute : 500 No. of heads/machine : 8 Feed lap weight : 60 to 80 g/m Fibre length (2.5% span length) : 25 to 40 mm Noil : 8 to 25% Draft range : 8 to 25 Delivered sliver hank : Ne 0.10 to 0.20 Can dimensions : 24 x 48 Installed power : 5.34 kw Compressed air requirement : 0.4 Nm 3 6 bar Exhaust air requirement : 0.8 m 3 /sec

6 Comber LK69 Production upto 2.1 Tons/day Speed upto 600 npm PACT for versatile operation 3/3 pneumatic load inclined drafting system placed over the coiler for direct entry of sliver to coiler calender roller Can changer Minimum Space Requirements 24 x 48 with two reserve cans 40 x 48 with one reserve can (Optional) Modular construction with 2 modules Change gearless drafting drive through servo motor (Optional) Hank monitoring system to verify consistent delivery Machine speeds can be changed through display (Optional) TECHNICAL DATA Nips per minute : 600 No. of heads/machine : 8 Feed lap weight : 60 to 80 g/m Fibre length (2.5% span length) : 25 to 40 mm Noil : 8 to 25% Draft range : 8 to 25 Delivered sliver hank : Ne 0.10 to 0.20 Can dimensions : 24 x 48 & 40 x 48 (Optional) Installed power : 5.84 kw Compressed air requirement : 0.4 Nm 3 6 bar Exhaust air requirement : 0.8 m 3 /sec

7 DRAW FRAME LDAZ High delivery speed of up to 1,100 mpm (mechanical) 4 Over 3 drafting arrangement with Pressure bar Digital auto levelling system Sliver monitor ensures consistent quality of sliver Integrated suction system for drafting, console, and sliver feed at Scanning Filter box with auto clean arrangement Inverter controlled main drive facilitates speed settings through display Creel to suit feed Can 24 dia. x 48 ht. and Optionally 40 dia. x 48 ht. Delivery Cans dia. 16 to 24 with castor / Delivery Can ht. 36, 42, 45 and 48 Improved ergonomics & easy accessibility of Drafting system TECHNICAL DATA Material : Cotton, Man-made Fibres and Blends Delivery : One Delivery speed : 250 to 1,100 mpm (in steps of 50 mpm) No of Doublings : 6 / 8 Fiber Length : 10 to 80 mm Draft : 3.58 to Feed hank : 0.08 to 0.24 Ne Delivery hank : 0.08 to 0.24 Ne Installed Power : kw Exhaust Air : 0.35 m 3 /sec Compressed Air : 0.2 Nm 3 per 6 bar

8 LAKSHMI MACHINE WORKS LIMITED Perianaickenpalayam, Coimbatore India. Phone : Fax : Issue No.8, November 2016 CIN-L29269TZ1962PLC Leadership through Excellence