Pictures not available 1 WARPING MACHINE: SECTIONAL BENNINGER SUPERTRONIC W:3800 YOC CREEL BENNINGER 800 BOBBINS YOC 1990

Size: px

Start display at page:

Download "Pictures not available 1 WARPING MACHINE: SECTIONAL BENNINGER SUPERTRONIC W:3800 YOC CREEL BENNINGER 800 BOBBINS YOC 1990"

Luke Blankenship
5 years ago
Views:

1 Machinery Listings Warping Benninger Finatex International: Please ask for details at: Reference: 6116 Cost: 0 Terms: - 1 WARPING MACHINE: SECTIAL BENNINGER SUPERTRIC W:3800 YOC CREEL BENNINGER 800 BOBBINS YOC 1990 Reference: Cost: 0 Terms: - -SECTIAL WARPING MACHINE BENNINGER MODEL SUPERTRIC YOC 1991 WIDTH 420 CM, CE LENGTH 1300 MM, CE RATIO 1:8 COMPLETE WITH PRESSING DEVICE - CREEL WITH 720 POSITIS, TROLLEY TYPE PITCH 27X27 CMS Reference: Cost: 0 Terms: SECD HAND BENNINGER SECTIAL WARPING MACHINE YEAR OF CSTRUCTI 1993 WORKING WIDHT 3400 MMS COMPLETE WITH : 1 CREEL MASTER 480 ENDS 1 CREEL MASTER 272 ENDS

2 Reference: Cost: 0 Terms: SEE -n.01-orditoio SEZIALE BENNINGER, Mod. BEN-MATIC 3400/1450/181 mm, anno 2000 con dispositivo di invergatura BEN-SPLITMATIC 800 mm Azionamento manuale o automatico CARATTERISTICHE TECNICHE - altezza utile massima mm altezza utile minima mm velocità massima di orditura m/min larghezza della sezione mm diametro massimo d avvolgimento del subbio mm diametro massimo delle flange/subbio inseribile mm accatastamento automatico della sezione - centralina inserimento dati di orditura - dispositivo automatico d incorsatura Ben Splitmatic 800 mm - regolazione di trazione del subbio - dispositivo pneumatico di pressione del subbio - ceratore per liquidi mod. VE (HL 4850 mm) pesante n.01-cantra BENNINGER, BEN-CREEL Mod. GM-D/Isotens 640 fili, anno 2000 con guidafili elettronico e dispositivo automatico di taglio fili e annodatura CARATTERISTICHE TECNICHE CANTRA: - numero rocche n scartamento orizzontale/verticale mm lunghezza totale mm tenditura dei fili modello ISOTENS con regolazione centralizzata - regolazione centralizzata della tensione della sezione - controllo e regolazione automatica di tensione della sezione - guardiafili elettronico, modello FILGARD - dispositivo automatico di taglio e annodatura dei fili con una capacità di annodatura pari ad un massimo di 120 fili /minuto. Dispositivo di taglio ognuno con 20 forbici comandate. Funzionamento a due o un lato della cantra. n.01-benninger sectional warper Mod. BEN-MATIC, width 3400/1450/181 mm, y.o.c. 2000, manual and automatic starting thecnical details : - Maximun useful width mm Minimun useful width mm maximun warping speed meter/min section width mm maximun winding diam. of beam mm maximun flanges diam. of beam mm automatic approaching of the section - programming data entry device of warping - automatic draw-lease model Ben Splitmatic 800 mm - Adjustment of traction of the beam - Pneumatic pressure beam - Waxing for liquids mod. VE (HL 4850 mm) heavy -n.01-benninger BEN-CREEL Mod. GM-D/Isotens 640 positions, y.o.c. 2000, thecnical details : - Numbers cones n Horizontal / vertical gauge mm Total lenght mm Breacking yarns model ISOTENS with central-regolation - Central-regolation of the section tension - Control and automatic regolation of the section tension - electronic yarn stop motion, model FILGARD - automatic cutting and knotting device of yarns - With a capacity of knotting equal to a maximum of 120 threads / minute. Cutting device 20 each with scissors controlled. Operation at two or one side of the creel. SELLING PRICE : ,00-mill-floor SELLING PRICE : ,00-FOT ( dismantling & loading into 2 container 40 H.C

3 Reference: 9667 Cost: 0 Terms: SEE -1 BENNINGER BEN-SUPERTRIC sectional warping machine year 1998, working width 3400 mm, drumcone length 1300 mm, beaming device with pressure rollers and waxing system, maximum warpbeam diameter 1200 mm, with warpcreel COMSA 50x8x2 = 800 ends (pitch 250mm) and warpcreel HACOBA 33x5x2 = 330 ends (pitch 350mm) Price: Euro /-- CNF Reference: Cost: 0 Terms: SEE -1 BENNINGER BEN-SUPERTRIC sectional warping machine year 1998, working width 3400 mm, drumcone length 1300 mm - cone ratio 1/5, beaming device with pressure rollers and waxing system, maximum warpbeam diameter 1200 mm. Price: EUR /- CNF Reference: Cost: 0 Terms: SEE N 1 WARPING MACHINE BENNINGER BEN-ERGOTRIC W:3400 YOC 1998 N 1 CREEL BENNINGER YOC 1998 PRICE: 70,000 EURO NET FOR US,CFR INCLUDED Reference: Cost: 0 Terms: SEE -Benninger Sectional warper Ben Tronic 3800 **** Yoc 2005 **** Working max width 3800 mm 3 PH 400 VAC 50 HZ 42 KW Cone 340/1600mm Max Diam Beam Flange 1250 MM Max warping speed 800M MIN Max Beaming speed 400m min Product use al kind of Yarns Bobines 640 bobines 30cm Price 115,000 Euro dismantled and loaded New Price 110,000 Euro

4 Reference: Cost: 0 Terms: SEE -1 BENNINGER BEN-SUPERTRIC sectional warping machine year 1998, working width 3400 mm, drumcone length 1300 mm - cone ratio 1/5, beaming device with pressure rollers and waxing system, maximum warpbeam diameter 1200 mm, with warpcreel COMSA 50x8x2 = 800 ends (pitch 250mm) and warpcreel HACOBA 33x5x2 = 330 ends (pitch 350mm). Price: EUR /- CNF VALUE Reference: Cost: 0 Terms: SEE -BENNINGER - SECTIAL WARPING MACHINE (1994), TYPE: SUPERTRIC, WORKING WIDTH: 3400 MM, LEASING DEVICE TYPE: ZUA e-1000, CREEL TYPE: GAAS, THREAD TENSIER TYPE: GZB-S-640 BOBBINS (PRETENSIERS / SECTI TENSI CTROL),ELECTRICAL CREEL STOP MOTI TYPE: GFAM-640, BEAM FLANGE DIAMETER: 800 MM, WARPING SPEED: 800 M/MIN, SECTI TENSI CTROL,STATIC ELIMINATOR THE GUIDE-REED, BEAM DOFFING DEVICE PRICE: EUR , MILL FLOOR Reference: Cost: 0 Terms: - -1 Hacoba sectional warper USK-S/BM, 3200 mm, creel for 550 bobbins Reference: Cost: 0 Terms: SEE -1 BENNINGER Supertronic Width 320cm Year 1988 with 624 Ends-Bobbins 1 BENNINGER Supertronic, Sectional, Warper, 320 Cm BENNINGER SUPERTRIC Sectional Warping Machine Machine are with Portal Control Warping Width 320 Cm Year 1988 Type Benninger Supertronic Manyfacturer Benninger Model : Supertronic With Warp Creel 39 x 8 x 2 = 624 Ends - Bobbins Factory No LOCATI : Bosnia and Herzegovina DELIVERY : Immediately PRICE : euro LOADED IN CTAINER

5 Reference: Cost: 0 Terms: - -BENNINGER: SECTIAL WARPER BEN-MATIC W:3400 YOC BENNINGER CREEL BEN-CREEL MODEL GM-D/ISOTENS YOC 2000 Reference: Cost: 0 Terms: SEE -1 BENNINGER SUPERTRIC sectional warping machine year 1998, working width 3400 mm, drum conus 340/1600 mm, max beamdisc diameter 1250 mm, waxing device, tension control, pneumatic pressure rollers, with 2 warpcreels GAA/GZB year 1998, each 672 ends (56 x 6 x 2), 2x14 trolleys, automatic tension control. Price: Euro /-- CNF major seaport Reference: Cost: 0 Terms: Benninger sectional warper, model BEN - ERGOTRIC, of 350cm w. wide, 800m/min., warpbeam diameter 1100mm with Benninger Ben-creel paralel creel, model GAAB, of 960 bobins, gauge 270mm, tension model GZB-S, yoc 1997, 380V-50HZ Delivery: Immediate Location: South America Pics: Avaliable Reference: Cost: 0 Terms: SEE -1 BENNINGER BEN-TRIC sectional warping machine year 2004, working width 3400 mm, drum conus 340/1600 mm, max. beamdisc diameter 1250 mm, max. tension warping 600 N - beaming N, waxing device, tension control, pneumatic pressure rollers, with BEN-CREEL year 2004, 64 x 6 x 2 = 768 ends, trolleys, automatic knotting device. Price: Euro /-- CNF major seaport Comat Reference: 8532 Cost: 0 Terms: - WARPING MACHINE: SECTIAL NUOVA COMAT SF 471 W:3500 YOC CREEL NUOVA COMAT 288 BOBBINS YOC 1979

6 Gamatex Reference: Cost: 0 Terms: SEE -N 1 WARPING MACHINE SECTIAL GAMATEX G410/M2 W:3300 YOC 2000 N 1 CREEL ROSTI RCF/ BOBBINS (AVAILABILITY 720 BOBBINS) 250x250 MM. S.N YOC 1996 PICTURES: UP REQUEST DELIVERY: READY IN WARPING ROOM PRICE: 36,000 EURO NET FOR US,CFR INCLUDED Giovanelli Reference: Cost: 0 Terms: - Hacoba -WARPING MACHINE: SECTIAL GIOVANELLI W:3400 YOC CREEL GIOVANELLI 736 BOBBINS YOC 1995 Reference: Cost: 0 Terms: - -1 N.1 HACOBA sectional warper mod. USK 1000 width 3600 mm, cone diam. 1000,yoc N.1 HACOBA creel mod. G2 with 800 positions, gauge 240 mm, yoc 1989 Sucker Muller Reference: Cost: 0 Terms: SUCKER/MULLER/ HACOBA Sectional warper, type USK-S/BM, w.w. 3,20 m, creel with 550 positions, yoc Attached please find some pictures.

7 Reference: Cost: 0 Terms: SEE -1 SUCKER MULLER electronic sectional warper TOPTRIC 2000, year 1998, working width 3400 mm, max beam disc diam mm, beaming device with waxing and pressure system, with Hacoba warpcreel G5, 28 x 6 x 2 = 336 ends, spindle distance 335 mm. Price: Euro /-- CFR V.T.A Reference: 8807 Cost: 0 Terms: SEE -1 V.T.A. sectional warping machine year 2006, working width 1850 mm, max. beamdisc diameter 1000 mm, with 1 BENNINGER warpcreel year 1996, 640 ends, pitch 250 mm, type GAAs, tensioners GZB, with LIBA stop-motion Price: Euro /-- CNF

Pictures not available 1 SECTIONAL WARPER BENNINGER BEN-SUPERTRONIC WIDTH 2.60M YEAR 1995 Details: Beams Diameter 1000mm Creel with 540 spindles

Pictures not available 1 SECTIONAL WARPER BENNINGER BEN-SUPERTRONIC WIDTH 2.60M YEAR 1995 Details: Beams Diameter 1000mm Creel with 540 spindles Machinery Listings Warping Benninger Finatex International: Please ask for details at: marketing@finatexinternational.com Reference: 7656 Cost: 0 Terms: - 1 SECTIAL WARPER BENNINGER BEN-SUPERTRIC WIDTH