An ISO 9001 : 2008 Certified Company

Transcription

1 ::: CAR BODY COLLISION BENCHES ::: :: Model :- W-1000 :: Max. lifting capacity Platform length Platform width Platform height Hydraulic pressure Post max. tension Post working range Pneumatic pressure range 3.0ton 5200mm 2090mm 500mm 1000psi 95kn 360 degree 0.8mpa 2200kg

2 ::: CAR BODY COLLISION BENCHES ::: :: Model :- W-1600 :: Max. lifting capacity Platform length Platform width Platform height Hydraulic pressure Post max. tension Post working range Pneumatic pressure range 3.0ton 5700mm 2100mm mm 1000psi 95kn 360 degree 0.8mpa 2600kg

3 ::: CAR BODY COLLISION BENCHES ::: :: Model :- W-3000 :: Max. lifting capacity Platform length Platform width Platform height Hydraulic pressure Post max. tension Post working range Pneumatic pressure range 3.5ton 5700mm 2090mm mm 1000psi 95kn 360 degree 0.8mpa 3000kg

4 ::: FUEL INJECTOR CLEANER & TESTER ::: :: Model :- HO-6C :: This product is applicable to diagnose and clean fuel injectors of various cars manufactured worldwide, improving stability, reliability and reducing pollution. It can perform automatic detecting, analyzing and cleaning. Operation temperature Tank capacity Test tube capacity Ultrasonic frequency Rotation speed Step Time counting range Step Oil pump pressure Fuel flow Motor power Motor voltage Packing size -100 C-400 C 4L 120cc 25khz r/min 50r/min sec 50 sec (adjustable) 1.8kg/cm2-10kg/cm2 4.5L/min 500w 220v, 1ph 45kg 580x490x730mm

5 :: MAIN FUNCTIONS :: It can not only diagnose and analyze the performance of the fuel injector, but also inspect dribbling, atomization, injecting angle, distributive value, uniformity coefficient, and their on off cycle, etc of single or multiple fuel injectors. 1. Can do reverse flushing, flush-back cleaning, ultrasonic flushing, and disaffiliation-free flushing to one or more fuel injectors. 2. Automatically simulate the overall process under various pulse width and engine speed. The operation status of the fuel injectors can also be observed whether at acceleration and deceleration. 3. Can manually set time, pulse width and rotation speed of the fuel injector, and observe the performance under varied parameters. Ease and convenience of operation. 4. Can determine the shortest on-off cycle and the quality of the injector. 5. Can do oil circuit testing, and disaffiliation-free flushing to the engine. :: MAIN FEATURES :: 1. Integration of advanced control technology and environmental concepts Cleaning, test and simulation of Automotive injectors. 2. Multi-functionality: Direct flush, Reverse flush, Ultrasonic cleaning, On-vehicle cleaning, Spray test, Equilibrium test Leakage test, Flow test, Automotive cleaning-test function 3. Test 6 injectors in one time 4. Injector fuel distribution and delivery checking 5. LED display with clear menu and easy operation 6. Wide models can be tested with stable performance and reliable data 7. Liquid in tube drain back to tank automatically 8. Separated ultrasonic bath (Installed in cabinet) 9. Optional: Special adapter for MONO & Side-feed injector

6 ::: FUEL INJECTOR CLEANER & TESTER ::: :: Model :- HO-4H :: Pressure Flow test accuracy Simulated RPM range Step PW range Step Timing range Ultrasonic timing range Motor power Motor voltage Packing size 0-6.5bar +2% rpm 10rpm ms 0.1ms 1-30min 1-15min 350w 220v, 1ph 45kg 670x470x600mm

7 :: MAIN FUNCTIONS :: Engine injector cleaning and detecting Engine on-car cleaning Leakage hunting Injector cleaning :: MAIN FEATURES :: Integration of advanced control technology and environmental concepts Cleaning, test and simulation of Automotive injectors. Multi-functionality: Direct flush, Reverse flush, Ultrasonic cleaning, On-vehicle cleaning, Spray test, Equilibrium test, Leakage test, Flow test, Automotive cleaning-test function Test 4 injectors in one time Injector fuel distribution and delivery checking LED display with clear menu and easy operation Wide models can be tested with stable performance and reliable data Liquid in tube drain back to tank automatically Separated ultrasonic bath (Installed in cabinet) Optional: Special adapter for MONO & Side-feed injector

8 ::: FUEL INJECTOR CLEANER & TESTER ::: :: Model :- HO-8H :: Ultrasonic cleaner power Simulated RPM range Step Injection time Step Time range Pulse width Step Test liquid tank volume Testing tube volume Motor power Motor voltage Packing size 100w 10000rpm 50rpm 0-600sec 1sec 10000sec (adjustable) 0-20ms 0.1ms 6L 120ml 250w 220v, 1ph 54kg 600x500x750mm

9 :: MAIN FUNCTIONS :: Engine injector cleaning and detecting Engine on-car cleaning Leakage hunting Injector cleaning :: MAIN FEATURES :: Integration of advanced control technology and environmental concepts Cleaning, test and simulation of Automotive injectors. Multi-functionality: Direct flush, Reverse flush, Ultrasonic cleaning, On-vehicle cleaning, Spray test, Equilibrium test, Leakage test, Flow test, Automotive cleaning-test function Test 8 injectors in one time Injector fuel distribution and delivery checking LED display with clear menu and easy operation Wide models can be tested with stable performance and reliable data Liquid in tube drain back to tank automatically Separated ultrasonic bath (Installed in cabinet) Optional: Special adapter for MONO & Side-feed injector

10 ::: WHEEL WASHER ::: :: Model :- DCX-100T :: Item Parameter Wash for tons engineering trucks, transport vehicle Start way Mechanical sensing start Wash pressure 3-4 kg/cm2 Wash time sec/vehicle Water used 30L/vehicle Total power 16kw Sewerage Sludge removal automatically Power supply 415V, 3ph, 50hz 4500kg Dimension 5350x2250x1000mm

11 :: MAIN FUNCTIONS & FEATURES :: Patented products, automatic rinse wheel and under body of engineering vehicle, solve the pollution on the road completely. Automatic remove sludge, and dosing to maintain water quality. Recycling use the wash water, maximally save water resources. Suitable for varieties of construction site, easily transition.

12 ::: IMPECT WRENCH ::: ¾ Impect Wrench Free speed 4500 rpm Max. torque 340 ft/lb Air inlet 1/4 B.S.P. Hose bore 3/8 (10mm) 4.8kg Bolt cap mm Cfm 12cfm 1 Impect Wrench Free speed 3500 rpm Max. torque 1840 ft/lb Air inlet 1/2 B.S.P. Hose bore ½ (10mm) 14.5kg Bolt cap mm Cfm 36cfm

13 :: IMPECT WRENCH :: TECHNICAL DETAILS :½ Impect Wrench Free speed 7000 rpm Max. torque 340 ft/lb Air inlet 1/4 B.S.P. Hose bore 3/8 (10mm) 2.6kg Bolt cap mm Cfm 4cfm ¾ Impect Wrench Free speed 4500 rpm Max. torque 340 ft/lb Air inlet 1/4 B.S.P. Hose bore 3/8 (10mm) 4.8kg Bolt cap mm Cfm 12cfm 1 Impect Wrench Free speed 3500 rpm Max. torque 1840 ft/lb Air inlet 1/2 B.S.P. Hose bore ½ (10mm) 14.5kg Bolt cap mm Cfm 36cfm Pramukh Equipments Plot No.-505, Road No.-13, G.I.D.C. Kathwada, Odhav Singarva Road, Kathwada, Ahmedabad Ph. No , Cell No pramukhequip@yahoo.co.in

14 ::: VACUUM CLEANER ::: :: Model :- C260 :: Power Volts H2O for lift Air flow Tank capacity Dimensions (LxWxH) No. of Motors 2000w 220v/1ph/50hz 2200mm 106Ltrs/sec. 60Its 99x63x56.5cms 2

15 ::: PAINT CURING SYSTEM ::: :: Model :- QU-I20A :: Power supply Watt Backing area Vertical height adjustment Setting time 220V, 50hz, 1Phase 2x1100w 1000 x 800mm mm 0 min 60min, can be adjustable :: FEATURES :: 1. Adopt aluminum alloy, Reflector made from mirror surface stainless steel 304, and other special materials 2. Adopt GBO 21 lime halogen short-wave infrared lamp OR PHILIP lamp (Can be customized) 3. Vertical lift and independent switch.

16 ::: PAINT CURING SYSTEM ::: :: Model :- QU-I30 :: Power supply Watt Backing area Vertical height adjustment Setting time 220V, 50hz, 1Phase 3x1100w 1200 x 1000mm mm 0 min 60min, can be adjustable :: FEATURES :: 1. Adopt aluminum alloy, Reflector made from mirror surface stainless steel 304, and other special materials 2. Adopt GBO 21 lime halogen short-wave infrared lamp OR PHILIP lamp (Can be customized) 3. Hydraulic lift, Can be rotated 300, independent switch.

17 ::: OIL SUCTION UNIT ::: Measuring beaker Tank capacity Oil extraction & oil suction Compressed air supply (Approx) 13 Ltrs 80 Ltrs By compressor air 1.5 Bar 30 Kgs

18 :: FEATURES :: Pneumatically sucks oil from vehicles. Heavy duty pneumatic lever provided for oil suction. Heavy duty castor wheels Powder coated body with chrome plated handles Heavy duty pipes for oil extraction Air safety valve give for releasing excess air pressure. Air pressure regulator provided for compressed air adjustment. Best quality shut off valves given for smooth operation.

19 ::: TOOL TROLLEY ::: 1. Size of Trolley: Ht 1110mm, Width 700mm & Depth 440mm Drawers and 1 Compartment. 3. Castor wheels for free movement within the workshop. 4. Instruction Sheet Holder.