Durability - Reliability - Profitability
|
|
- Hilary Eaton
- 5 years ago
- Views:
Transcription
1 Durability - Reliability - Profitability Solutions for professionals in diamond drilling and sawing, since
2 C14 CONCRETE SAW 355mm handheld wet or dry diamond saw with 2800W motor for up to 125mm depth of cut. Ideal for in-door cutting. Magnesium blade guard provides maximum strength and minimum weight Load warning lamp shows you when machine is close to overloading Integrated water feed system Tool-free detachable splash guard Depth of cut 125mm Tool-free detachable guide rollers for perpendicular cuts and reduced operator fatigue Optional Dust Skid provides excellent dust control for dry cutting OPTIONAL ACCESSORIES: Dry Dust Skid Assembly Ø 355 Diamond Saw Blade(Ø25.4) Related Product: Vacuum Cleaner DS25L C14 Rated power 2800W (220V), 1700W (110V) Voltage, Frequency V~ 50-60Hz or V~ 50-60Hz No load RPM 4500 Linear speed with 14 blade 83,6 m/s Blade Diameter 355mm (14") Arbor 25,4mm (1 ) Max. Cutting Depth 125mm (5") Protection Class Class I with PRCD / GFCI Weight 7,9kg (17,42 Lbs) (8,3kg) (18,3 Lbs with guide rollers) Dimension (LxWxH) 611mm x 245mm x 280mm Cable Length 3m * M17 Combination Wrench * Guide Roller Set * Splash Guard Unit * Blade Guard Brush * PRCD / GFCI Interruptor 2
3 C16 CONCRETE SAW 405mm handheld wet or dry diamond saw with 3200W motor for up to 150mm depth of cut. Ideal for in-door cutting. Magnesium blade guard provides maximum strength and minimum weight Load warning lamp shows you when machine is close to overloading Integrated water feed system Tool-free detachable splash guard Depth of cut 150mm Tool-free detachable guide rollers for perpendicular cuts and reduced operator fatigue OPTIONAL ACCESSORIES: FLUSH CUTTING Detachable blade guard with toggle latches for flush cutting (WITH OPTIONAL FLANGE) Ø 405 Diamond Saw Blade(Ø25,4) HV Pattern Flush Cutting Kit- 1 arbor Longyear 6-bolt (3 1/2 (88,9mm) bolt hole circle) & 3 bolt combined Ø 405 Flush Cutting Saw Blade (Fits HV Pattern Flush Cutting Kit) HY Pattern Flush Cutting Kit- 1 arbor 6-bolt (60mm bolt hole circle) Related Product: Vacuum Cleaner DS25L C16 Rated power 220V-240V: 2700W (certificate), 3200W (actual) Rated power V: 2300W (certificate), 3000W (actual) Voltage, Frequency V~ 50-60Hz or V~ 50-60Hz No load RPM 3900 Linear speed with 16 blade 82,7 m/s Blade Diameter 405mm (16") Arbor 25,4mm (1 ) Max. Cutting Depth 150mm (6") Protection Class Class II with PRCD / GFCI Weight 9,6kg (21,1 Lbs) Dimension (LxWxH) 660mm x 259mm x 280mm Cable length 3m * M17 Combination Wrench * Guide Roller Set * Splash Guard Unit * Blade Guard Brush * PRCD / GFCI Interruptor (220V models only) 3
4 C18 HIGH FREQUENCY CONCRETE SAW & P8K CONVERTER 450mm (18") wet diamond saw with 6500W high frequency permanent magnet synchronous motor for up to 175mm depth of cut. Flush cut capability. Blade Guard with Toggle Latches for quick conversion to Flush cutting LED Load Warning Lamp Special Motor Coupling Cable 6500W, water cooled permanent magnet motor for outstanding power and efficiency Constant speed is maintained regardless of load. Flush Cutting Kit (optional) C18 IP Class: IP55 Rim Brush for flush cutting (optional) P8K Converter with built-in PRCD has full electronic protection for over and under voltage, thermal and current overload supplies high frequency current to the tool LCD Information Display shows voltage, elapsed hours, error codes, etc. 3 phase power supply cable Guide Rollers for stability and perpendicular cutting Flush Cutting with (optional) Flush Cutting Flange (flush cut blade not included) See P.81 (Specify bolt hole pattern when ordering) Adaptor for single phase supply included. (maximum 16A) Water cooled 8000W power converter with special circuitry which allows it to accept 3 phase 380V, 3 phase 230V and single phase 230V supply at the maximum possible power level C18 (SAW) Power 3 ~ V 6500W 3 ~ V 5500W (25A), 3500W (16A) 1 ~ V 5500W (32A), 3500W (16A)* * No Load RPM 2500/min Linear Speed w/18" blade 59.8m/s Blade Diameter 457mm (18") Arbor 25.4mm (1") Max. Cutting Depth 175mm (6-7/8") Dimensions (L x W x H) 810mm x 260mm x 310mm Weight 11.6kg (25.5 Lbs) P8K ( CONVERTER ) Power : Input (maximum) 3 ~ V : 16A 8000W 3 ~ V : 25A 7000W 1 ~ V : 32A 7000W Min. Water Flow (25 C) 3.5 L/min (1 gpm) Max. Water Pressure 7 bar (100 psi) Dimensions (L x W x H) 460mm x 220mm x 260mm Weight 7.1kg (15.6 Lbs) STANDARD ACCESSORIES * Flush Cutting Flange Kits (see p. 81) * Flush Cutting Rim Brush * Single Phase Adaptor * Maximum input current with the supplied single phase adaptor cable is 16A. If a 32A 220V breaker is available, a 32A rated cable should be used to supply the converter 4
5 R16 HIGH FREQUENCY RING SAW & P8K CONVERTER 300mm Depth of Cut 400mm (16") wet ring saw with 6500W high frequency permanent magnet synchronous motor for up to 300mm depth of cut. LED Load Warning Lamp PATENTED 6500W, water cooled Permanent Magnet Motor for outstanding power and efficiency Constant speed is maintained regardless of load. High Stability Guide Roller design keeps the blade stable and centralized when beginning the cut R16 IP Class: IP55 P8K Converter Build-in PRCD has full electronic protection for over and under voltage, thermal and current overload supplies high frequency current to the tool Patented One Step Drive Tensioner is fast and easy to adjust and keeps tension equalized Easy to adjust guide rollers LCD Information Display shows voltage, elapsed hours, error codes, etc. Adaptor for single phase supply included (max. 16A) 3 phase power supply cable Water cooled 8000W power converter with special circuitry which allows it to accept 3 phase 380V, 3 phase 230V and single phase 230V supply at the maximum possible power level Blade changes can be performed quickly and require no disassembly of the cover R16 (SAW) Power: 3 ~ V 6500W 3 ~ V 3600W (16A), 5500W(25A) 1 ~ V 3600W (16A), 5500W(32A)* * No Load RPM 2500/min Linear Speed 53.0m/s Blade Diameter 400mm(15-3/4") Max. Cutting Depth 300mm (11-13/16") Dimensions (L x W x H) 830mm x 240mm x 460mm Weight 12.8kg (27.5 Lbs) 5 P8K ( CONVERTER ) Power : Input (Maximum) 3 ~ V : 16A 8000W 3 ~ V : 25A 7000W 1 ~ V : 32A 7000W Min. Water Flow (25 C) 3.5 L/min (1 gpm) Max. Water Pressure 7 bar (100 psi) Dimensions (L x W x H) 460mm x 220mm x 260mm Weight 7.1kg (15.6 Lbs) * Maximum input current with the supplied single phase adaptor cable is 16A. If a 32A 220V breaker is available, a 32A rated cable should be used to supply the converter
6 CG150mm WALL CHASER A powerful wall chaser with a maximum depth of 50 mm and cutting width up to 47 mm. Features an optional efficient guide rail system. Advanced motor electronics for constant speed, soft start, overload and thermal protecion Large switch for holding in various positions Safety Lock Cutting depth adjustment Quick-opening blade guard Related Product: Vacuum Cleaner DS25L Built in laser helps operator to produce a straight cut each time Multi-location wheels for constant support over irregular surfaces 2 blades 5 blades OPTIONAL ACCESSORIES: glows green to indicate normal load, flashes red when full load is reached and glows solid red to indicate overload or overheat. Tool-Free Arbor Screw for fast and easy blade changes Built in dust collection brush effectively retains dust. Includes spacers for both 2 and 5 blade chasing. Tool free blade changes. Optional quick set-up Guide Rail System provides maximum operator convenience and minimizes human error. Guide rail support Set (1000mm) Universal: 150mm Diamond Saw Blade 150 x H10 x T2,6 x 22,23mm Hard Material: 150mm Diamond Saw Blade 150 x H10 x T2,6 x 22,23mm Guide rail 1400mm CG150 Power Input 2500W (220V), 2300W (110V) Voltage, Frequency V~ 50-60Hz, V~ 50-60Hz No Load RPM 6500 Max. Blade Diameter Ø150mm Blade bore size 22,23mm (7/8") Max Depth of Cut 50mm Max Channel Width 47mm Cut to Ceiling 25mm Cut to Edge 28mm Soft Start / Overload Protection YES Thermal Protection YES Constant Speed YES Cable Length 5m Dimensions (LxWxH) 365mm x 220mm x 288mm Weight ( Without cable and blade ) 7,2kg (15,84 Lbs) * Blow Molded Case * Spacer Set * Chisel * Blades x 2 6
7 DM52D DRY DIAMOND CORE DRILL MOTOR A light, high efficiency 1800W, 2 speed motor for dry drilling up to 182mm. Soft grip handle for maximum comfort Handle inline with spindle for precise control Tubular Spirit Level for precision Switchable soft percussion for optimized dry drilling Dust extraction port for efficient dry drilling DM52D Power Input 1800W (220V), 1800W (110V) Voltage, Frequency V~ 50-60Hz, V~ 50-60Hz Rated Load Speeds min -1 Speed 1: 1080 Speed 2: 2160 Percussion Frequency Speed 1: bpm Speed 2: bpm Capacity-Dry 182mm (7 1/4") Spindle Thread 1 1/4 UNC male & 1/2 BSP female Protection Class Class II Dimensions (LxWxH) 505mm x 105mm x 210mm Net Weight 5,0kg (11,0 Lbs) Cable length 3m * Blow Molded Case * Side Handle * M32 Wrench 7
8 DM52D DRY DIAMOND CORE DRILL MOTOR Optional Accessories ADD bayonet coupling ADD quick release dry drilling equipment 1. Centering pilot, ADD 3. ADD quick release Extension 200mm /4" to ADD M42 Adaptor Dry Diamond Core Bits Diameter(mm) Coupling Useful Length(mm) Order Number 56 ADD ADD ADD ADD ADD ADD ADD ADD ADD Related Product: Vacuum Cleaner DS25L Sharpening plate M16 dry drilling equipment 5. Centering Pilot 6. M16 dust extractor /4" to M16 Adaptor AS Dry Diamond Core Bits Diameter(mm) Coupling Useful Length(mm) Order Number 68 M M M M
9 DM62 DRY DIAMOND CORE DRILL MOTOR A specially designed heavy-duty 2 speed 2000W motor for dry drilling of reinforced concrete up to 162mm, and standard dry drilling up to 262mm. Magnesium alloy motor housing for minimal weight and maximum strength. Tubular Spirit Level for precision Soft grip handle for maximum comfort Handle inline with spindle for precise control Built in vertical levels. Dust extraction port for efficient dry drilling Switchable soft percussion for optimized dry drilling LED load indicator light for optimizing drilling efficiency with overload and overheat warning DM62 Power Input 2000W (220V), 1700W (110V) Voltage, Frequency V~ 50-60Hz or V~ 50-60Hz Rated Load Speeds min -1 Speed 1: 750 Speed 2: 1140 Percussion Frequency Speed 1: bpm Speed 2: bpm Capacity-Dry (Reinforced Concrete) 162mm (6 1/4") Capacity-Dry (Brick) 262mm (10 5/16") Spindle Thread 1 1/4 UNC male & 1/2 BSP female Protection Class Class I Dimensions (LxWxH) 430mm x 290mm x 122mm Net Weight 6,2kg (13,64 Lbs) Cable length 3,5m 9 * Blow Molded Case * Side Handle * M32 Wrench
10 DM62 DRY DIAMOND CORE DRILL MOTOR Optional Accessory Special Dry Diamond Core Bits for Reinforced Concrete Diameter(mm) Coupling Useful Length(mm) Order Number 52 ADD ADD ADD ADD ADD ADD ADD Diameter(mm) Coupling Useful Length(mm) Order Number 112 ADD ADD ADD ADD ADD ADD ADD ADD bayonet coupling ADD quick release dry drilling equipment 1. Centering pilot, ADD 3. ADD quick release Extension 200mm /4" to ADD M42 Adaptor Dry Diamond Core Bits Diameter(mm) Coupling Useful Length(mm) Order Number 56 ADD ADD ADD ADD ADD ADD ADD ADD ADD Related Product: Vacuum Cleaner DS25L Sharpening plate M16 dry drilling equipment 5. Centering Pilot 6. M16 dust extractor /4" to M16 Adaptor Dry Diamond Core Bits Diameter(mm) Coupling Useful Length(mm) Order Number 68 M M M M AS
11 DM2 WET DIAMOND CORE DRILL MOTOR A light, compact, high speed 1800W coring motor, specially designed for fast wet drilling of small diameter holes up to 50mm. Ideal for chemical anchors and similar applications. Gear Box with mechanical clutch Spirit Level for precise alignment High Efficiency 1800W motor with overload and thermal protection Side Handle Inline with spindle axis for precise control Integrated Water Feed DM2 Power Input 1800W (220V), 1800W (110V) Voltage, Frequency V~ 50/60Hz or V~ 50/60Hz No Load/ Rated Load Speed, min / 4225 Capacity-Wet 50mm (2") Spindle Thread 1/2" BSP Female Soft Start & Overload Protection With Mechanical Safety Clutch With Protection Class Class I with PRCD / GFCI Dimensions (LxWxH) 360mm x 90mm x 280mm Neck Diameter 60mm Net Weight 4,5kg (9,9 Lbs) Cable length 3m * Side Handle * Water Supply Kit * PRCD / GFCI Interrupter 11
12 DM2 WET DIAMOND CORE DRILL MOTOR Optional Accessory Wet Diamond Core Bits Diameter(mm) Coupling Useful Length(mm) Order Number 16 1/2"BSP /2"BSP /2"BSP /2"BSP /2"BSP /2"BSP /2"BSP /2"BSP /2"BSP /2"BSP /2"BSP /2"BSP /2"BSP Related Product: Vacuum Cleaner DS25L Sharpening plate Bit extensions 1/2" BSPx /2" BSPx AS
13 DM5 WET DIAMOND CORE DRILL MOTOR A light, compact, high efficiency 1800W coring motor for convenient wet drilling up to 132mm Handle inline with spindle for precise control Tubular Spirit Level for precise alignment 1800W motor with overload and thermal protection Soft grip handle 2 speed gearbox with mechanical clutch Water Supply Kit DM5 Power Input 1800W (220V), 1800W (110V) Voltage, Frequency V~ 50-60Hz, V~ 50-60Hz Rated Load Speeds min -1 Speed 1: 780 Speed 2: 1400 Capacity-Wet 132mm (5 1/4") Spindle Thread 1 1/4 UNC male & 1/2 BSP female Neck Diameter 60mm Protection Class Class I with PRCD / GFCI Dimensions (LxWxH) 450mm x 105mm x 280mm Net Weight 4,8kg (10,56 Lbs) Cable Length 3m * Blow Molded Case * Side Handle * Water Supply Kit * M32 Wrench * PRCD / GFCI Interrupter 13
14 DM5 WET DIAMOND CORE DRILL MOTOR Optional Accessory Wet Diamond Core Bits Diameter(mm) Coupling Useful Length(mm) Order Number 16 1/2"BSP /2"BSP /2"BSP /2"BSP /2"BSP /2"BSP /2"BSP /2"BSP /2"BSP /2"BSP /2"BSP /2"BSP /2"BSP /4" /4" /4" /4" /4" /4" /4" /4" /4" /4" /4" /4" Related Product: Vacuum Cleaner DS25L Sharpening plate Bit extensions 1 1/4" x /4" x /2" BSPx /2" BSPx AS
15 DM6P WET & DMC6P WET/DRY DIAMOND CORE DRILL MOTORS Heavy duty 3 speed 2000W drilling machines with magnesium construction for drilling up to 162mm. Soft grip handle for maximum comfort. Magnesium alloy motor housing & gear case for minimal weight and maximum strength. Built in horizontal levels. Built in vertical levels. Handle inline with spindle for precise control WET AND DRY GEKA COUPLINGS FOR DMC6P 3 speed oil bath gearbox with clutch DM6P LED load indicator light for optimizing drilling efficiency with overload and overheat warning Water Supply Kit Vacuum Adaptor Head Water Feed Adaptor Head DM6P DMC6P Power Input 2000W (220V), 1700W (110V) Voltage, Frequency V~ 50-60Hz or V~ 50-60Hz Rated Load Speeds min / 910 / 2560 Capacity -Wet Hand-Held: 82mm (3") Rig-Mounted:162mm (6 1/4") Capacity-Dry n/a 182mm (7 1/4") Spindle Thread 1 1/4 UNC male & 1/2 BSP female Neck Diameter 60mm Protection Class Class I with PRCD / GFCI Dimensions (LxWxH) 437mm x 115mm x 289mm Net Weight 6,3kg (13,89 Lbs) 6,4 kg (14,08 Lbs) Cable length 3,5m 15 DM6P & DMC6P * Blow Molded Case * Side Handle * M32 Wrench * PRCD / GFCI Interrupter DM6P (only) * Water Supply Kit DMC6P (only) * Water Feed Adaptor Head * Vacuum Adaptor Head
16 DM6P WET & DMC6P WET/DRY DIAMOND CORE DRILL MOTORS Optional Accessory DM6P & DMC6P Diameter (mm) Coupling Useful Length (mm) Order Number 16 1/2"BSP /2"BSP /2"BSP /2"BSP /2"BSP /2"BSP /2"BSP /2"BSP /2"BSP /2"BSP /2"BSP /2"BSP /2"BSP /4'' /4'' /4'' /4'' /4'' /4'' /4'' /4'' /4'' /4'' /4'' /4'' /4'' /4'' /4'' Sharpening plate Wet Diamond Core Bits DMC6P ADD quick release dry drilling equipment 1. Centering pilot, ADD 3. ADD quick release Extension 200mm /4" to ADD M42 Adaptor Diameter (mm) Coupling Useful Length (mm) M16 dry drilling equipment 5. Centering Pilot 6. M16 dust extractor /4" to M16 Adaptor Order Number 56 ADD ADD ADD ADD ADD ADD ADD ADD ADD Diameter (mm) 1 Dry Diamond Core Bits 5 Dry Diamond Core Bits Coupling ADD bayonet coupling 2 4 Useful Length (mm) Order Number 68 M M M M Related Product: Vacuum Cleaner DS25L AS Bit extensions 1 1/4" x /4" x /2" BSPx /2" BSPx
17 DM8P WET DIAMOND CORE DRILL MOTOR Heavy duty 3 speed 2500W drilling machines with magnesium construction for drilling up to 202mm. Handle inline with spindle for precise control Magnesium alloy motor housing and gear case for minimal weight and maximum strength. Motor features constant speed electronics, maintaining even speed for stable drilling and longer core bit life. Soft grip handle for maximum comfort Water Supply Kit 3 speed oil bath gearbox with clutch Load indicator light for optimizing drilling efficiency with overload and overheat warning Built-in vertical level DM8P Power Input 2500W (220V), 2300W (110V) Voltage, Frequency V~ 50-60Hz or V~ 50-60Hz Rated Load Speeds min / 1050 / 2200 Capacity -Wet Hand-Held: 82mm (3") Rig-Mounted:202mm (8") Spindle Thread 1 1/4 UNC male & 1/2 BSP female Neck Diameter 60mm Protection Class Class I with PRCD / GFCI Dimensions (LxWxH) 463mm x 127mm x 310mm Net Weight 7,3kg (16 Lbs) Cable length 3,5m * Blow Molded Case * Side Handle * Water Supply Kit * M32 Wrench * PRCD / GFCI Interrupter 17
18 DM8P WET DIAMOND CORE DRILL MOTOR Optional Accessory Wet Diamond Core Bits Diameter(mm) Coupling Useful Length(mm) Order Number 16 1/2"BSP /2"BSP /2"BSP /2"BSP /2"BSP /2"BSP /2"BSP /2"BSP /2"BSP /2"BSP /2"BSP /2"BSP /2"BSP /4'' /4'' /4'' /4'' /4'' /4'' /4'' /4'' /4'' /4'' /4'' /4'' /4'' /4'' /4'' /4'' /4'' /4'' Sharpening plate Bit extensions 1 1/4" x /4" x /2" BSPx /2" BSPx AS
19 DM9, DM10, DM12 DIAMOND CORE DRILL MOTORS High efficiency 3500W motors with Aluminum body for maximum performance. Three models available with a range of gearings for different needs. Aluminum housing for better cooling and durability. Slow Start An automatic hole starting function which protects core bits from breakage. Built in vertical level, Anti-Seize Ring prevents core bits from getting stuck on the spindle Built in Tubular Spirit Level for precision Mounted To The Optional Rig 220V s 110V s Indicator Light for optimizing drilling efficiency with overload and overheat warning DM9 DM10 DM12 Power Input 3500W (220V), 2800W (110V) Voltage V~ 50-60Hz or V~ 50-60Hz Rated Load Speeds min / 630 / / 480 / / 370 / 620 Drilling Capacity Ø250mm (10") Ø300mm (12") Ø350mm (14") Gear Oil Type W90 Gear Oil Capacity 625ml Spindle Thread 1 1/4 UNC male & 1/2 BSP female Protection Class Class I With PRCD / GFCI Soft Start & Overload Protection With Dimensions (LxWxH) 550mm x 155mm x 210mm Weight 12,9kg (28,4 Lbs) * PRCD / GFCI Interrupter REMARK: V w/o PRCD / GFCI * Water Supply Kit 19
20 DM9,DM10, DM12 WET DIAMOND CORE DRILL MOTORS Optional Accessory Wet Diamond Core Bits Diameter(mm) Coupling Useful Length(mm) Order Number DM9 DM10 DM /4'' /4'' /4'' /4'' /4'' /4'' /4'' /4''' /4'' /4'' /4'' /4'' /4'' /4'' /4'' /4'' /4'' /4'' /4'' /4'' /4'' /4'' /4'' To provide clearance for the switch box when mounting the motor to some models of other manufacturers' rigs. (The spacer also adds an extra 80mm to the maximum core bit diameter with a given stand.) S motor rig 40mm Spacer Kit Bit extensions 1 1/4" x /4" x Sharpening plate /2" BSPx /2" BSPx
21 DM14 RIG-MOUNTED DIAMOND CORE DRILL MOTOR A high efficiency 4 speed, 3500W motor with Aluminum body, optimized for a wider range of drill sizes in one tool. Aluminum housing for better cooling and durability. Slow Start An automatic hole starting function which protects core bits from breakage. Built in vertical level, Indication light noti-fies operator when motor is close to over load. Anti-Seize Ring prevents core bits from getting stuck on the spindle Built in Tubular Spirit Level for precision Mounted To The Optional Rig 220V s 110V s Indicator Light for optimizing drilling efficiency with overload and overheat warning DM14 Power Input 3500W (220V), 2800W (110V) Voltage V~ 50-60Hz or V~ 50-60Hz Rated Load Speeds min / 300 / 565 / 780 Drilling Capacity Ø400mm (16") Gear Oil Type W90 Gear Oil Capacity 625ml Spindle Thread 1 1/4 UNC male & 1/2 BSP female Protection Class Class I With PRCD / GFCI Soft Start & Overload Protection With Dimensions (LxWxH) 550mm x 155mm x 210mm Weight 13,5kg (29,7 Lbs) * PRCD / GFCI Interrupter x1 REMARK: V w/o PRCD / GFCI * Water Supply Kit x1 21
22 DM14 RIG-MOUNTED DIAMOND CORE DRILL MOTOR Optional Accessory Wet Diamond Core Bits Diameter(mm) Coupling Useful Length(mm) Order Number /4'' /4'' /4'' /4'' /4'' /4'' /4'' /4'' /4'' /4'' /4'' /4'' /4'' /4'' /4'' /4'' /4'' /4'' /4'' /4'' /4'' /4'' /4'' To provide clearance for the switch box when mounting the motor to some models of other manufacturers' rigs. (The spacer also adds an extra 80mm to the maximum core bit diameter with a given stand.) S motor rig 40mm Spacer Kit Bit extensions 1 1/4" x /4" x Sharpening plate /2" BSPx /2" BSPx
23 DIAMOND CORE DRILL STANDS Aluminum column with steel inserts for maximum rigidity and minimum weight S800 and S500 include a second crank spindle with reduction gearing for decreased effort. Convenient, tool-free carriage lock lever Mounting Plate supplied as standard for S350, S500 & S800 Quick mount Dovetail cradle for fast motor fixing Crank Handle doubles as a wrench Wheels for easy transport Optional: Anchoring Plate For S350, S500 & S Heavy gauge steel base with lightening holes for optimum stability and vibration resistance. AS200 folds down completely for easy storage Optional AS200 Water Collector for diameters up to 160mm AS200 S350 S500 S800 Capacity w/o extension spacers (mm) Ø202 Ø352 Ø350 Ø350 Max. Capacity with extension spacers (mm) N/A N/A Ø500 Ø800 Effective Stroke(mm) Dimensions (LxWxH)(mm) 361 x 250 x x 245 x x 240 x x 275 x 1035 Net Weight(Not Including crank handle)(kg) 10,5kg (23,1 Lbs) 16,6kg (36,52 Lbs) 19,08kg (41,97 Lbs) 26,5kg (58,42 Lbs) 23
24 DIAMOND CORE DRILLING UNITS ACCESSORIES extension mast Fixing kit M12(concrete) Sharpening plate Extension mast bracket for AS Fixing kit M10 (brick) Water Collector Set (includes 3 membranes) Replacement membranes (5 pack) VB400 Vacuum plate: Fits AS200, S350 & S Vacuum hose Related Product: Vacuum Cleaner DS25L Vacuum pump VP140 VP140-Vacuum Tank 24
25 G5 CONCRETE GRINDERS 125mm, compact and high endurance concrete grinder with excellent dust control. Variable speed for different applications Anti-vibration mountings for maximum operator comfort Tool-free sliding cover for edge grinding Constant speed electronics for an even finish Bristles for efficient dust containment OPTIONAL ACCESSORIES: Diamond cup wheel 125mm Rough Universal Finishing PCD Floor Grinding Trolley Related Product: Vacuum Cleaner DS25L G5 Power Input 2200W (220V), 1700W (110V) Voltage, Frequency V~ 50-60Hz or V~ 50-60Hz No Load/min Wheel Diameter 125mm (5") Arbor 22,23mm (7/8") & 25,4 (1") (Double-Sided) Dimensions (LxWxH) 246mm x 280mm x 325mm Weight 5,75kg (12,65 Lbs) Cable length 3m * Blow Molded Case * Lock Nut Wrench * Face Spanner Wrench * Hex Key M6 25
26 SM7 CONCRETE GRINDER 180mm, compact and high endurance concrete grinder with excellent dust control. Variable speed for dif-ferent applications Anti-vibration mount-ings for maximum operator comfor Tool free detachable cover with magnet for edge grinding Constant speed electronics for an even finish Bristles for efficient dust containmen OPTIONAL ACCESSORIES: Diamond cup wheel 180mm Universal Floor Grinding Trolley SM7 Power Input 2200W (220V), 1700W (110V) Voltage, Frequency V~ 50-60Hz or V~ 50-60Hz No Load/min Wheel Diameter 180mm (7") Arbor 22,23mm (7/8") Dimensions (LxWxH) 246mm x 280mm x 325mm Weight 5,74kg (12,62 Lbs) Cable length 3m Related Product: Vacuum Cleaner DS25L * Blow Molded Case * Lock Nut Wrench * Face Spanner Wrench * Hex Key M6 26
27 GS9FE DRYWALL SANDER A light weight and balanced sander, with pivoting sanding head and effective dust control. Mesh sanding discs for optimized dust collection 225mm Mesh Dustless Sanding Discs #80 mesh #100 mesh #120 mesh Bail handle for precise control Hook & Loop Sponge Pad Sponge grip increases operator comfort Standard carry bag for easy transport Swiveling Bayonet Hose Connector provides best flexibility when sanding Speed adjustment wheel for adjusting speed to suit work needs Related Product: Vacuum Cleaner DS25L GS9FE Power Input 550W Voltage, Frequency V~ 50-60Hz or V~ 50-60Hz No Load min Full Load min Sanding Disc ø225 mm (8 7/8") Dimensions (LxWxH) 1580mm x 260mm x 350mm Net Weight 4,7 kg (10,36 Lbs ) Cable length 4,2m 27 * Bail Handle * Carry Bag * Velcro Straps
28 DS25L Vacuum Cleaners Automatic filter cleaning by magnetic pulse, an ideal wet and dry vacuum for multiple purpose use. 13 meters total reach for best autonomy Storage for accessories, hose and cable Over-full indicator light Variable speed for different conditions Auto-start function for the connected power tool Magnetic pulse Automatic filter cleaning for maximum efficiency Dual large surface area (6600 cm 2 ) polyester filters for wet and dry OPTIONAL ACCESSORIES: Replacement Fleece Accessories kit dust bags (5 pack) Power consumption (max) Dust Class Volume Flow (Max) measured at the motor head Volume Flow (Max) measured at the end of hose Vacuum (max.) measured at the motor head Vacuum (max.) measured at the end of hose Container volume (max.) Gross-Dust-Water Sound pressure level Dimensions Weight Power Cable Length Reach DS25L 1600 Watt L 64 l/s 42 l/s 259 mbar 230 mbar 25/20/15 L 69,0 db (A) 43 x 39 x 49cm 12,7kg 8,0 m 13m * Vacuum cleaner * 5 meters antistatic hose * 1 x adapter, 49 mm to 35 mm system * Strap for hose * 1 x fleece dust bag * 1 accessory storage system Note: Manufacturer reserves the right to update pictures and specifications without prior notice. Specifications and pictures herein are for reference only. For latest specifications, refer to the machine nameplate. 28
29 DS35M Vacuum Cleaners Dust class M. Automatic filter cleaning by magnetic pulse, an ideal wet and dry vacuum for multiple purpose use. 13 meters total reach for best autonomy Storage for accessories, hose and cable Over-full indicator light Variable speed for different conditions Magnetic pulse Automatic filter cleaning for maximum efficiency Auto-start function for the connected power tool 35 liter tank Dual large surface area (6600 cm 2 ) polyester filters for wet and dry OPTIONAL ACCESSORIES: Replacement Fleece Accessories kit dust bags (5 pack) Power consumption (max) Dust Class Volume Flow (Max) measured at the motor head Volume Flow (Max) measured at the end of hose Vacuum (max.) measured at the motor head Vacuum (max.) measured at the end of hose Container volume (max.) Gross-Dust-Water Sound pressure level Dimensions Weight Power Cable Length Reach DS35M 1600 Watt M 64 l/s 42 l/s 259 mbar 230 mbar 35/25/22 L 69,0 db (A) 53 x 40 x 55cm 15,7kg 8,0 m 13m * Vacuum cleaner * 5 meters antistatic hose * 1 x adapter, 49 mm to 35 mm system * Strap for hose * 1 x fleece dust bag * 1 accessory storage system Note: Manufacturer reserves the right to update pictures and specifications without prior notice. Specifications and pictures herein are for reference only. For latest specifications, refer to the machine nameplate. 29
30 Dedicated to providing performance and value to construction professionals AGP EUROPE BVBA EVENBROEKVELD 16D 9420 ERPE-MERE BELGIUM
2019 EUROPE CATALOG since
2019 EUROPE CATALOG since 1989 1 C14 CONCRETE SAW 355mm handheld wet or dry diamond saw with 2800W motor for up to 125mm depth of cut. Ideal for in-door cutting. Magnesium blade guard provides maximum
More informationDurability - Reliability - Profitability
Durability - Reliability - Profitability Solutions for professionals in diamond drilling and sawing, since 1988 1 C14 CONCRETE SAW 355mm handheld wet or dry diamond saw with 2800W motor for up to 125mm
More informationDurability - Reliability - Profitability
Durability - Reliability - Profitability Solutions for professionals in diamond drilling and sawing, since 1988 1 C14 CONCRETE SAW 355mm handheld wet or dry concrete saw with 2800W motor for up to 125mm
More informationCS180, CS125, CS125N, CS150, CS150N EP5W, EP5WN, EP5L, EP5LN, EP5LF EP5LFN, EP5LFB, EP5LFBN, EP7F, EP7FB SP2500, SP4000, RP160, RP220
DIAMOND CORE DRILL 4~19 Tile Core Drill Tile Core Drill Machine Wet + Dry Diamond Core Drill Wet+Dry Diamond Core Drill Wet+Dry Diamond Core Drill Diamond Core Drilling Machine Rig-Mounted Diamond Core
More informationDBM HAND HELD CORE DRILLING MACHINE DBM WET DIAMOND CORE DRILL MOTOR
1 DBM-180-2 WET DIAMOND CORE DRILL MOTOR The DBM-180-2 is an effective choice of two speed hand-held diamond core drills. The model is equipped with a high efficiency 1800W motor including soft start,
More information10.5 gal. Vertical Oil Lubricated Air Compressor
10.5 gal. Vertical Oil Lubricated Air Compressor Model No. AC1104 Tank volume: 10.5 gal. (40 L) Direct drive Oil-lubricated single cylinder pump for durability and long life triple the pump life of comparable
More informationSPECIFICATIONS Power input (W) No load speed (rpm) Hammer rate (under load) Drilling concrete / steel / wood 24 / 13 / 30 mm
BH 24 IE 24 MM SDS-Plus Rotary Hammer Powerful 800 watt motor 24 mm drilling capacity in concrete Safety clutch for user protection Variable speed electronics for control Hammer action stop for drilling
More informationProfessional Brochure of Machines and Diamond Tools for Construction
Professional Brochure of Machines and Diamond Tools for Construction INDEX 3 Drilling Selection chart for drilling machines P. 4 Drilling motors P. 5 / 7 Core drill stands P. 8 / 9 SDR 5 drilling stand
More informationPower Equipment
Power Equipment - 445 - Power Equipment T80900 1100w 19m Weldon Shank Auto-Reverse Tapping & Core Drill Machine Fully Mechanical tapping with automatic reversing controlled by crank motion Two-mode gear-box:
More informationDR. BENDER GmbH Innovative power tools. Professional Diamond - Drilling and Sawing Equipment
DR. BENDER GmbH Innovative power tools Professional Diamond - Drilling and Sawing Equipment Innovative power tools DR. BENDER GmbH Company Dr. Bender produced high quality and high efficient power tools
More informationDRILLING ACCESSORIES
Pipe Mount Works on any Core Bore rig Can be used on any size pipe Comes complete with base plate, tie-down strap and hardware Bit capacity depends on rig being used Automatically runs your M-2 core rig!
More informationDIY (Personal Use Only)
1 DRILL ELECTRIC DRILL and IMPACT DRILL Standard Accessories KW0700026: 1pc Impact Drill 5pcs Masonry Drills 9pcs Twist Drills KW0700026 KW0701000 KW0701002 KW0701001 5pcs Grinding Stones 1pc Case KW0700026
More information1.1/2" - Air Impact Wrench (Twin Hammer) 1" - Air Impact Wrench (Twin Hammer) 1" - Air Impact Wrench (Twin Hammer)
Impact Wrenches 13000-2 Anvil Length Bolt Capacity Overall Length Torque (5s) 12000-2 8" 3,700rpm 2,000 ft-lbs 10kg 2" 3,700rpm 2,000 ft-lbs 7.7kg 3/4" - Air Impact Wrench (Single Hammer) 1266 2" 3,700rpm
More informationIndustrial. Ready when you are. RediPower. Tools
RediPower Industrial Tools Ready when you are RediPower Ready when you are Available, cost effective, and durable are recognized attributes of the RediPower products. Since their introduction in the mid
More informationBosch Home Exclusive Line
Bosch Home Exclusive Line Make it your home with the Bosch Home Exclusive Line. With Bosch s DIY power tools you always have the right tool at hand for your projects at home. Make it your home. All DIYers
More informationAIR DRILL, AIR ANGLE GRINDER and AIR DIE GRINDER
AIR DRILL, AIR ANGLE GRINDER and AIR DIE GRINDER AIR DRILL KW0800256 3/8 Chuck, Reverse Equipped with precision chucks for excellent accuracy Precision bearing provides longer tool durability KW0800258
More informationCordless angle grinder ACCUFLEX 18.0 V, 125 mm. L EC/5.0 Set
Bahnhofstraße 5 77 Steinheim Phone +49 744 828-0 Fax +49 744 25899 Cordless angle grinder ACCUFLEX 8.0 V, 25 mm L 25 8.0-EC/5.0 Set Order number 47.947 Battery voltage 8 V Battery capacity 2,5 / 5,0 Ah
More informationCATALOG 2017
www.hpschou.com CATALOG 2017 PRESENTS A RANGE OF TOOLS Introducing the new Probuilder Power-tool concept The new Probuilder concept, one 18 V lithium battery platform for all Power-tools, designed for
More informationInjection Logo (Optional) To improve brand and product image. Soft Grip For comfortable use and higher working efficiency
The range covers full range of portable power tools, including Cordless Screwdriver, Cordless Drills, Impact Drills, Impact Wrench, Rotary Hammers, Demolition Hammer, Angle Grinders, Sanders, Jig Saws,
More informationThreaded rod cutters. Trapezoid-sheet pliers TOOLS. Field of application Very simple cutting of threaded rods on site
Threaded rod cutters Very simple cutting of threaded rods on site Cuts galvanised threaded rods in the qualities 4.6 and 5.8 No reworking of the threaded rods necessary Clean cut allows the nuts to be
More information- the choice of. professionals...
- the choice of professionals... ONE powersource gives multiple choice... HYDRAULIC SYSTEMS POWE RED BY HYCON HEAVY DUTY BREAKERS 2 - in high quality tools for professionals! LIGHT DUTY BREAKERS RING SAW
More informationCP3650 Series CP AB & CP AB Angle Sanders
32 CP3650-20AB CP3650-075AB rpm CP3650-20AB 2000 CP3650-075AB 7500 Index No. Parts No. Description Qty Index No. Parts No. Description Qty 653967390 Adaptater 6 654300330 Inlet 7 656452290 Disc Spring
More informationPneumatic tools and accessories. For trades and businesses.
Competence from passion. Pneumatic tools and accessories. For trades and businesses. Pneumatic tools Lightweight, stable construction and proven durability: effective tools for maximum productivity. Impact
More informationCORDLESS RANGE. Polígono Indutrial O Rebullón s/n Mos - España -
29 07 CORDLESS RANGE CORDLESS RANGE INNOVATIVE CORDLESS SOLUTIONS FOR TOUGH CONDITIONS AEG POWERTOOLS offer today s professional user a wide range of innovative, powerful cordless solutions that are capable
More informationMT07 MT03 MHS100AG MEASURING TAPE & HACKSAW MEASURING TAPE & HACKSAW MEASURING TAPES MEASURING TAPES HEAVY DUTY DELUXE TYPE HACKSAW W/12" H.S.S.
MEASURING TAPE & HACKSAW MEASURING TAPE & HACKSAW MT07 ITEM NO. MT03 MEASURING TAPES HIGH IMPACT ABS CASE W/ RUBBER PROTECTED RUBBER COVERED CASE, COMFORTABLE SIZE MEASURING TAPES INNER PC/BOX PACKING
More informationFor maximum material removal with minimum effort, choose the best tool.
RediPower For maximum material removal with minimum effort, choose the best tool. How to select your Grinder Collet grinders Choose your tool, then your accessory: carbide burrs, mounted points, brushes,
More informationG10SR3(H6) 100mm Angle Grinder
CORDLESS PNEUMATIC DRILLING ROTARY & Model Wheel Diameter Input Power QUICK REFERENCE GUIDE FOR GRINDERS Spindle Thread Anti Vibe Handle UVP Switch Type Trigger Lock G10SN 100mm 840W 10000 (min-1) M10
More informationComplete systems for efficient diamond drilling
Complete systems for efficient diamond drilling Power and intelligence in perfect When you measure efficiency in terms of number of holes per hour or day, it s just as much about useability and ergonomics
More informationSPECIAL MACHINES.
SPECIAL MACHINES www.klindex.com VERTIKA Grinding and polishing machine for walls and vertical surfaces with built-in vacuum system. Vertika is another Klindex exclusive. It is the only machine in the
More informationDynabrade Vacuum Cut-Off Wheel Tools
Dynabrade Vacuum Cut-Off Wheel Tools Efficiently Capture Dust and Debris While Cutting Reorder No. D07.12 Ideal for Effective Cutting through Fiberglass, Composites, More Vacuum Shroud Diverts Dust and
More informationHydraulic cut-off saws, core drills and submersible pumps. Powerful, lightweight and portable
Hydraulic cut-off saws, core drills and submersible pumps Powerful, lightweight and portable The best power-to-weight Construction and rental companies around the world are discovering the advantages of
More informationCONCRETE AND MASONRY SYSTEMS MADE IN GERMANY
CONCRETE AND MAONRY YTEM MADE IN GERMANY ATED R G E T ED IN C N A TEM DV A Y T MO LE DUT CONCRETE AND MAONRY DUTLE TOOL YTEM ARE YOU OHA READY? Effective June 23, 2016 OHA requires all and any indoor and
More informationQuick drills out spot weld on fenders, doors, etc. Free speed: 11000rpm Collet size: 6mm (1/4")
JTC-3101 M INI AIR DIE GRINDER JTC-3321 SPOT WELD CUTTER KIT JTC-3401 1/2" HEAVY DUTY AIR M INI IM PACT WRENCH Free speed: 25000 rpm Quick drills out spot weld on fenders, doors, etc. Free speed: 11000rpm
More informationPOWER TOOLS. Brochure The Power in your hands
POWER TOOLS Brochure 2010 The Power in your hands GR 3,6Li Li-Ion CORDLESS SCREWDRIVER GR 7,2Li / BR 10,8Li Li-Ion CORDLESS SCREWDRIVERS / DRILL DRIVER Voltage: 3.6V Integral battery: 1.3 Ah Li-Ion No
More informationJET FINISHING. Surface Grinders Bench Grinders Accessories
Surface Grinders.............................. 120 Bench Grinders............................... 122 Accessories................................... 122 119 6"x18" PRECISION MANUAL SURFACE GRINDER FINISHING
More informationAIR SANDERS & POLISHERS
AIR SANDERS & POLISHERS The most complete line of air finishing tools. Ingersoll Rand finishing tools are designed for long-life and swirl-free finishes. 49 4151-HL High Performance 150 mm Random Orbital
More information5 YEARS WARRANTY QUALITY & DURABILITY TESTS
5 YEAR WARRANTY 5 YEARS WARRANTY The quality of Powerplus XQ is highlighted by a warranty of no less than 5 years! This unique warranty advantage assures you that you made the right purchase and allows
More informationProfi Silver Line Range 2005 Only direct import. Created :58 Revised :40 Page 1
Profi Silver Line Range 2005 Only direct import. Created 10.02.2005 14:58 Revised 25.05.2005 11:40 Page 1 INDEX Article Group Page Angle Grinders 3 Cordless Screwdriver 4 Laser Jig Saw 5 Laser Circular
More informationGENERAL CATALOG 2014 DRILLING/SCREWING/CHISELLING DIAMOND CORE DRILLING MIXING SANDING/MILLING/SMOOTHING SAWING/CUTTING/SLITTING POLISHING/CALENDERING
POLISHING/CALENDERING SAWING/CUTTING/SLITTING SANDING/MILLING/SMOOTHING MIXING DIAMOND CORE DRILLING DRILLING/SCREWING/CHISELLING GENERAL CATALOG 2014 VACUUMING Today permanent company expansion at buildings
More informationBREAKERS, TAMPERS & DRIVERS
BREAKERS, TAMPERS & DRIVERS Flush face couplers are factory installed. REL-GRD SERIES THE DOOGIE DRIVER GROUND ROD DRIVER The REL-GRD Series Ground Rod Driver from RELIABLE EQUIPMENT has been designed
More informationThe complete FEIN program for sanding: Angle grinders p Construction cutter p Angle polishers p Pipe sander p.
FEIN Grinders Precision grinding. Grinders are the marathon runners of power tools. Whereas the loads for screwdriving and drilling generally involve brief peaks of output, grinding, finishing and cutting
More informationCordless rotary hammer drill 18,0 V CHE 18.0-EC
Bahnhofstraße 5 77 Steinheim Phone +49 744 828-0 Fax +49 744 25899 Cordless rotary hammer drill 8,0 V CHE 8.0-EC Order number 430.005 Battery voltage 8 V Battery capacity 2,5 / 5,0 Ah No load speed 0-400
More informationHAMMERS NEW. 26mm 3 Mode SDS-Plus Hammer NEW NEW. 28mm 3 mode hammer with QCC. 26mm 3 Mode D Handle Hammer NEW NEW
22mm 2 Mode Hammer D25032K*/ D25033K/D25033C 4 to 22 mm in diameter Large hammer mechanism delivers high performance with low stress to the critical components resulting in better durability Electronic
More informationPUMA RANGE OF AIR TOOLS
Type G / ATAT-3170 3mm Micro Pencil Grinder PUMA RANGE OF AIR TOOLS Now with new Safety levers. Better quality & Lower prices! ATAT-7032 6mm Mini Die Grinder ATAT-7033 6mm Straight Die Grinder ATAT-7033L
More informationDotco Drill Specifications
Dotco Drill Specifications Speed Drill Diameter Type Weight Length Head Height Drill Chuck rpm (Capacity) (Housing) kg mm mm Size Air Inlet NPT Series 15LF straight - (300 Watt) 15LF081-38+ 5300 1/4" C
More informationFein The Metal Industry Specialists
www.fein.com.au ENDS MAY 31 2017 Fein The Metal Industry Specialists SEE INSIDE FOR SPECIAL OFFERS MAGDRILL RANGE DUST EXTRACTION ANGLE GRINDERS COLD CUT SAW 3 8 4-5 3 FEIN: THE LEADERS IN CORE DRILLING
More informationCore Drill Equipment.
Core Drill Equipment Core drilling machine KB110P The compact, lightweight and easy solution for all installation and fastening holes from Ø 10-162 mm User friendly, lightweight and self-explanatory Lightweight
More informationElectric Power Tools Created :05 Revised :08 Page 1
2005 Created 01.08.2005 11:05 Revised 02.08.2005 10:08 Page 1 INDEX Article Group Page Electric Hoists 3 Chain Hoist 3 Pneumatic Hammer Drills 4 Electric Hammer Drill 5 Paint and Mortar Mixer 5 Electric
More information15D/18D/20DA-7E. EUROTRADING MORTIER Torhoutbaan ICHTEGEM Tel Fax
Some of the photos may include optional equipment. 15D/18D/20DA-7E FORKLIFT TRUCKS Environmental - Friendly VERKOOP VERHUUR TWEEDEHANDS SERVICES EUROTRADING MORTIER Torhoutbaan 181-8480 ICHTEGEM Tel. 050
More informationPRICE CATALOG. golzusa.com
2018 PRICE CATALOG golzusa.com Innovative and Expansive for over 70 years With just over 70 employees at its headquarters in Hellenthal / Germany, GÖLZ develops and produces construction equipment that
More informationV ~ 50 Hz / 250 W 220 mm 1.2 mm / 600 cm Twin line cutting Plastics. '!0A68CF-gbggjj! +/ pc. '!0A68CF-fjibhj!
WELL DONE. LAWN TRIMMERS LOW WEIGHT EASY HANDLING ELECTRIC LAWN TRIMMERS Single / twin line cutting Second handle Telescopic long handle Motor head rotateable Motor head can be tilted Flower guard Fully
More informationClausing Precision Manual Surface Grinders
Clausing Precision Manual Surface Grinders Precision Manual Surface Grinders with Table Sizes: 6" x 18" & 8" x 18" Standard Features... High precision cartridge spindle Anti-wear guide ways coated with
More informationPrices Valid While Quantities Last
MODEL DESCRIPTION PRICE 831325-9 Small LXT Tool Bag $ 20.00 821010-X 14" Tool Bag $ 23.00 821007X 21" Tool Bag $ 28.00 831278-2 Large LXT Tool Bag $ 48.00 831269-3 LXT Tool Bag With Wheels $ 60.00 1 P
More informationHR2610/ HR2611F/ HR2610T/ HR2611FT Combination Hammers 26mm (1")
TECHNICAL INFORMATION Model. Description HR2610/ HR2611F/ HR2610T/ HR2611FT Combination Hammers 26mm (1") CONCEPT AND MAIN APPLICATIONS HR2610 series models are 26mm (1") combination hammers adapted for
More informationSanders, Buffers & Polishers Introduction
Sanders, Buffers & Polishers Introduction Dotco sanders, buffers and polishers are available in a variety of styles and power ratings to provide flexibility in choosing the best tool for the job. Disc
More informationAIR DRILL, AIR ANGLE GRINDER and AIR DIE GRINDER
AIR DRILL, AIR ANGLE GRINDER and AIR DIE GRINDER AIR DRILL KW0800256 3/8 Chuck, Reverse Equipped with precision chucks for excellent accuracy Precision bearing provides longer tool durability KW0800258
More informationModel. Reach into areas as small as 3/8". Model. Max. Air Flow SCFM (L/Min)
The Dynafile Original The Best Tracking Abrasive Belt Tool in the World! 14000 For 24" Long Belts World-famous Dynafile replaces tedious hand filing and sanding. Grind, deburr, blend, polish, finish and
More informationProduct Information G10SQ(H1) 4 (100mm) Angle Grinder
G10SQ(H1) 4 (100mm) Angle Grinder Two position handle Excellent overload durability 100mm Grinding disc Full length paddle switch Tool-less wheel guard 100mm Input power 840W 10,000 (min-1) 16mm Spindle
More information5~12 13~27 28~47 48~57 58~64 65~84 85~98 99~ ~114
ELECTRIC PISTON PUMP AIRLESS SPRAYER AIR-ASSISTED AIRLESS PAINT SPRAYER HVLP TURBINE PAINT SPRAYER EC021,PM021LF, PM021,PM025, PM031, PM039 AC023 T328 5~12 MAGNETIC CORE DRILL Low Profile Magnetic Drilling
More informationDBM200-3 DIAMOND CORE DRILLING MACHINES
Unit 4/1 Rocklea Drive Port Melbourne Vic 3207 1300 109 108 www.traxxcp.com.au DBM200-3 DIAMOND CORE DRILLING MACHINES OPERATING MANUAL CAUTION: Machine equipped with overheat thermal protection. When
More informationEquipment Rental PRICE AND INFORMATION BOOKLET All Rights Reserved
Equipment PRICE AND INFORMATION BOOKLET WWW.THECONCRETEPROTECTOR.COM 1.877.743.9723 LEONIDAS 2692 (OR SIMILAR MODEL) The Warrior Equipment LEONIDAS 2692 is a fully gear planetary, four head 26.92 concrete
More informationAngle & Vertical Grinders
Angle & Vertical Grinders Lightweight aluminium housing to help reduce operator fatique. Designed to handle a variety of applications from fine deburring to heavy grinding. Equipped for Type 27 depressed
More informationFeatures and Specifications for Impact Wrenches
Pneumatic Air Tools Version 2017 Revised 06/2017 Email your order to: sales@polyconn.com or fax to (763) 398-2590. www.polyconn.com. Questions call: (763)559-0388 3062 Ranchview Lane North. Plymouth, MN
More informationCordless Tools Lithium-ion Technology
22 Professional Blue Power Tools for Trade & Industry Cordless Tools Lithium-ion Technology 00% drill/driver at half the size Only half the size of a 2-volt standard cordless drill/driver Professional
More informationSanders & Polishers. Sanders & Polishers
35 Non-Vacuum (NV) Self Vacuum (SV) Central Vacuum (CV) Select the right random orbital for your applications MODEL PAD SIZE ORBIT PAD TYPE 2 Handed in. mm in. mm Non- Vacuum (NV) CP7225-3 3 75 3/32 2.5
More informationDiamond Systems DIAMOND SYSTEMS
DIAMOND SYSTEMS 88 Diamond drilling tools Diamond coring tool DD 110-W Page 92 Diamond coring tool DD 150-U Page 92 Diamond coring tool DD 160 Page 93 Diamond coring tool DD 200 G02 Page 93 Diamond coring
More informationRough Grinding and Cutting off
Rough Grinding and Cutting off Working in a tough environment places high demands on the tools and on the operator. The high power-to-weight ratios of our tools make them comfortable to work with and gives
More informationRepair Parts Parts List for RIDGID 10 Compound Miter Saw Model No. MS1065LZ RIDGID parts are available on-line at
0. Repair Parts Model No. MS0LZ 0 0 0 0 0 FIGURE A. 0. 0 0 0 0. 0 0 WARNING: The assembly shown represents an important part of the Double Insulated System. To avoid the possibility of alteration or damage
More informationNote. Icons. Double Insulation. Variable Speed. Brake. Reversing. . New aesthetic design. Charger: . New aesthetic design. . Charging time: 60min
TOOL CATALOGUE 1 Index Cordless Driver Drill 1 MT070 1 MT90 3 Cordless Percussion Driver Drill 1 MT071 1 MT903 3 Cordless Impact Driver MT080 1 MT93 Drill MT081 1 MT9 Percussion Drill 3 MT191 5 MT961 3
More informationTampers. Concrete And Asphalt Saws TC54 TC63 TC70 CS454 M CS502 HD
1 Tampers TC54 TC63 TC70 Hand-Arm-Vibration only 6.7m/s 2 (TC63). Easy access clutch, for easy maintenance (TC63). Non-leaking fuel cap. High jump for more compaction. Fully covered engine to prevent any
More informationErgonomic design for comfort. Reduced vibration. Twin hammer impact mechanism. Part No. Maximum Torque Free Speed Weight Ave Air Consumption
3/8 Impact wrench The smallest in PCL s range of Prestige Impact Wrenches. The 3/8 Impact Wrench is designed for professional heavy duty use, with an ergonomically designed soft grip handle and a lightweight
More informationMetal. Industrial quality Made in Germany. The new FEIN compact angle grinders. NEW
Metal Industrial quality Made in Germany. The new FEIN compact angle grinders. NEW Not only do the new FEIN angle grinders allow me to work faster but they last much longer too. Dominic Schade, design
More informationPOWER TOOLS 2017 / 18. The Power in your hands.
POWER TOOLS 2017 / 18 The Power in your hands www.sparky.eu SPARKY GROUP Our company Professionalism & Excellence With over 50 years of manufacturing experience, their own 40 acre European manufacturing
More informationINNOVATIVE POWER IS OUR QUALITY
INNOVATIVE POWER IS OUR QUALITY P3 MAXXHEAT 3 - in - 1 Multifunctional heater P11 GIRAFFE AIR Telescopic ladder P14 MAXXPACK 18 V 18 V Li-Ion collection Multifunctional: weeder, hot air gun and BBQ lighter
More informationD-25 Drill Rig. 700 Hicks Drive, Elburn, IL Phone:
Power Source: Gasoline or Diesel Engine Maximum Gross Spindle Torque: 2320 ft. lbs. (3145 Nm) to 3066 ft. lbs. (4156 Nm) Spindle Bore: 2-3/8 (60mm) Spindle Travel: 66 (1,676mm) Spindle & Retract Force
More informationPalm-Style Mini-Orbital Offset Mini-Orbital...55 Angle-Head Mini-Dynorbital...56 Right Angle Mini-Orbital...57 Electric Dynorbital...
Dynorbital-Spirit...46 HiVac Dynorbital-Spirit...48 Mesh Abrasive Systems...49 Dynorbital Supreme...50 Two-Hand Dynorbital...52 11" Dia. Dynorbital...53 Palm-Style Mini-Orbital...54 7 Offset Mini-Orbital...55
More informationTECHNICAL INFORMATION
TECHNICAL INFORMATION Model No. Description CONCEPT AND MAIN APPLICATIONS Specification HR2800, HR2810, HR2811F HR2810T, HR2811FT Rotary Hammers 28mm (1-1/8") HR2800 series models have been developed as
More information35/40/45DS-7E 50DA-7E DIESEL FORKLIFT TRUCKS Environmental - Friendly. n Photo may include optional equipment.
35/40/45DS-7E 50DA-7E DIESEL FORKLIFT TRUCKS Environmental - Friendly n Photo may include optional equipment. FORKLIFT Excellent Model New criterion of Forklift Trucks Hyundai introduces a new line of
More informationThe CLIPPER Solutions
The CLIPPER Solutions 93 C51 6,5 Hp Ø 350mm 76kg Petrol Compact, robust and highly manoeuvrable machines designed for both wet and dry cutting of concrete and asphalt. Features Cutting depth adjustment
More informationPart No. Description Part No. Description
Hand Tool Part No. Description 804-1 Blow Mold Case 804-2 19 1/2 Extension Tube 804-3 16 1/2 Extension Tube 804-4 8 1/2 Extension Tube 804-5 5 Extension Tube 804-6 3 1/4 Extension Tube 804-7 Serrated Saddle
More informationWho we are... SIMPLY THE BEST
Suzhou Liangming Power Tools Co., Ltd dd: No. 5599 Wuzhong venue, Wuzhong district, Suzhou Jiangsu province, China, 215164 Tel: +86 0512 6653 7663 Fax: +86 0512 6653 5275 info@liangming-tools.com Power
More informationSURFACE GRINDERS. A Line of Precision Low-cost, High Performance Surface Grinders
SURFACE GRINDERS PRODUCT CATALOG www.clausing-industrial.com 800.323.0972 SURFACE GRINDERS A Line of Precision Low-cost, High Performance Surface Grinders Precision Manual Surface Grinders Precision Hydraulic
More informationFein The Metal Industry Specialists
www.fein.com.au ENDS MAY 31 2017 Fein The Metal Industry Specialists SEE INSIDE FOR SPECIAL OFFERS MAGDRILL RANGE DUST EXTRACTION ANGLE GRINDERS COLD CUT SAW 3 8 4-5 3 FEIN: THE LEADERS IN CORE DRILLING
More informationABRASIVE BELT TOOLS. APTOOL.RU Phone: +7 (495)
ABRASIVE BELT TOOLS APTOOL.RU Phone: +7 (495) 723-19-55 ABRASIVE BELT TOOLS The Dynafile Original Air-Powered Abrasive Belt Tool The Best Tracking Abrasive Belt Tool in the World! 14000 For 24" Long Belts
More information3260:- 1/2 6220:- 3/4 6220:- 1
3260:- 1/2 6220:- 3/4 6220:- 1 ATEX CP6748EX 1/2 ATEX CP6768EX 3/4 ATEX CP6778EX 1 The Best 1/2 Art Nr 6151590570 WORKING TORQUE (FWD) 180-760 Nm MAXIMUM TORQUE (REVERSE) 1085 Nm FREE SPEED 8400 rpm WEIGHT
More informationCOMFOrt, PErFOrManCE and SaFEty: world LEaDInG angle GrInDErS FrOM MEtaBO
angle GrInDErS COMFOrt, PErFOrManCE and SaFEty: world LEaDInG angle GrInDErS FrOM MEtaBO For grinding, cutting, polishing or sanding, angle grinders by Metabo are world leaders. If there s one thing we
More informationGENERAL SPECIFICATION
GENERAL SPECIFICATION Description FSG-2040ADII FSG-2060ADII FSG-2440ADII FSG-2460ADII FSG-2480DII Table Size 19 5/8 x393/8 (500x1000mm) 19 5/8 x59 (500x1500mm) 24 x39 3/8 (610x1000mm) 24 x59" (610x1500mm)
More informationFSG-2040ADII/2060ADII 2440ADII/2460ADII/2480ADII COLUMN TYPE HIGH PRECISION 3-AXIS AUTOMATIC SURFACE GRINDER
FSG-2040ADII/2060ADII 2440ADII/2460ADII/2480ADII COLUMN TYPE HIGH PRECISION 3-AXIS AUTOMATIC SURFACE GRINDER 1 CONTROL PANEL F S G - 2 0 / 2 4 COLUMN TYPE HIGH PRECISION 3-AX 1. Control power supply switches
More informationSystem Assessment & Certification to ISO9001
System Assessment & Certification to ISO9001 INDEX ELECTRIC PISTON PUMP AIRLESS SPRAYERS YERS PM025, PM021 MAGNETIC DRILLS Auto Reverse-Tapping & Core Drill Machine TP2000 Semi Auto Feed Magnetic Drilling
More informationMASONRY SPECIALS VALID THRU Nov. 30, 2006
MASONRY SPECIALS VALID THRU Nov. 30, 2006 14 PARTNER K750 CUT-OFF SAW New Dual Charge engine technology provides an extremely powerful engine with low emissions and excellent fuel economy. Includes manual
More informationQuality tools at affordable prices
2010 Quality tools at affordable prices Over 45 years experience offering quality tools at affordable prices Power Tools Cordless Drills... 4-6 Corded Drills... 6-7 Multifunction Tools... 7 Table Saw...
More information4~ ~22 23~37 38~45 46~ ~ ~ ~ ~65 66~72 73~82 83~84 85~86 87~ ~91 METAL WORKING TOOLS
System Assessment & Certification to ISO9001 / 2008 INDEX ELECTRIC PISTON PUMP AIRLESS SPRAYERSY PM039, PM025, PM021, PM021LF HVLP TURBINE PAINT SPRAYER T-328 DIGITAL BENDING MACHINE DB32 MAGNETIC CORE
More information.4\ * * 18 VOLT POWER-PLUS SAWZALL *~ [;J. ~ .. H E A V Y - 0 U T Y. See pages for more cordless sawzall details/
.. H E A V Y 0 U T Y SAWZALL [;J. ~ 651521 * INCLUDES BATTERY PACK, CHARGER, 2BLADE PACK, AND STEEL 651522* INCLUDES TWO BATTERY PACKS, CHARGER, 2BLADE PACK, AND STEEL * TOOL AVAILABLE WITHOUT BATTERY,
More informationTECHNICAL INFORMATION
TECHNICAL INFORMATION Model No. Description CONCEPT AND MAIN APPLICATIONS Specification GA4030, GA4530, GA5030 Angle Grinders 100mm (4"), 115mm (4-1/2"), 125mm (5") GA4030/ GA4530/ GA5030 are small diameter
More informationThe FLEX Giraffe. Light as air and best by far.
The FLEX Giraffe. Light as air and best by far. Warranty FLEX North America limited ONE YEAR WARRANTY FLEX North America warrants its Professional Power Tools for a period of one year from the date of
More informationCore Drill Equipment.
Core Drill Equipment Core drilling machine KB110P The compact, lightweight and easy solution for all installation and fastening holes from Ø 10-162 mm User friendly, lightweight and self-explanatory Lightweight
More informationPARTS LIST WRANGLER 2625 DB
PARTS LIST WRANGLER 2625 DB 1 NOTES 2 BRUSH GEAR MOTOR ITEM PART NO. PART DESCRIPTION QTY. 2393001 COMPLETE MOTOR ASSEMBLY 1 101 3391221 NEGATIVE LEAD 1 102 3391201 1/4-20 X 7 3/4THRU BOLT 2 103 10-24
More information18V Brushless 125mm (5 ) Angle Grinder
18V Brushless 125mm (5 ) Angle Grinder WIRELESS, ON DEMAND, DUST EXTRACTION Makita s Auto-start Wireless System (AWS) has modernised on-demand dust extraction to meet the needs of cordless power tool users.
More information20D1 ia 0 mond Tools
2010 Diamond Tools All prices valid from 1 st June 2010. All prices in EURO quoted EXW Salzburg incoterms 2000, excl. VAT. Moreover our General Sales, Delivery and Payment terms are effective. Technical
More informationExcavators. Mini/Midi
Mini/Midi Excavators Hitches 1 Buckets 2-6 Earth Drills 7 Breakers 8 Hand Held Tools 9-12 Compactors 12 Rock Wheel 13 Ripper Tooth 13 Selector Grabs 13 Mini/Midi Excavators Introduction Mini/Midi Excavators
More information