HKA Equipment C LAUNCH CNC602A Injector cleaner & tester W WH505 Pressure brake bleeder W WH509 Brake fluid condition tester Ultrasonic cleaning: To p

Transcription

1 AUTOMOTIVE GARAGE EQUIPMENT W WONDERFU WDF-A30 Automotive refrigerant handling system S SC2020 Radiator coolant replacement system High pressure: 0~3Mpa Vacuum: 0~0.1Mpa Precision of pressure measure: 1%of full scale(fs) Weight scale range: 0~25Kg Precision of weight scale: 0.2%of full scale(fs) Weight scale display precision: 10g Speed of vacuum zing: 120L/min Refrigerant cylinder capacity: 1Kg - Pneumatic design provides simple and easy extraction - Transparent twin cylinder, easy to monitor fluid separation process - Also for fluid extraction application Capacity: 16-16L, High -1250mm Weight: kg Dimension: 330 x 50 x 100mm Pneumatic operation P PC500 Power steering fluid changer Capacity: 2 Liters Weight: 33.3 kg Dimension: 500 x 80 x 90mm Pneumatic operation A AT1000A Professional automatic transmission fluid exchanger Capacity: 20 Liters separate used fluid and new fluid. Weight: 6.2kgs Dimension: 650 x 530 x 980mm Pump: Gear Pump 3 *Prices and specifications are subject to change without prior notice.

2 HKA Equipment C LAUNCH CNC602A Injector cleaner & tester W WH505 Pressure brake bleeder W WH509 Brake fluid condition tester Ultrasonic cleaning: To perform simultaneous cleaning on several injectors and to remove the carbon deposits on the injector completely. Uniformity/Spray ability test: To test the uniformity of injecting amount of each injector, and to monitor the spraying status of each injector with the help of backlight. This test is also for reverse flush. Leakage test: To test the sealing and dribbling conditions of injectors under system pressure. Injecting flow test: To check the injecting amount of the injector in 15 seconds of constant injection. Auto test: To test injectors by simulating different working conditions. Specifications: Power requirement: AC20v/50Hz/1Ph, Input power: 250W, Ultrasonic cleaner power: 100W, Simulated RPM range: 10~9990rpm; step: 10rpm, Time range: 1~9999s, Pulse width: 0.5~25ms; step 0.1 ms, Fuel tank capacity: 700ml, Dimensions: 385mm 10mm 500mm, Weight: About 35kg. Air operated pressure brake bleeder Suitable fpr clutch bleed as well as brake bleed. 5 Litre capacity tank. Complete with master cylinder adaptor kit Specification: * Dimension: 350 x 275 x 50mm * Weight: 10kgs There is an electronic circuit design for the tester to maintain its accuracy in the event of power shortage. High tech brake fluid sensor, easy to operate. User friendly handle to perfectly fit the hand. The tester exam the quality of the brake fluid..*13. Benz (C-Class, E-Class, S-Class). *Prices and specifications are subject to change without prior notice. 35

3 AUTOMOTIVE GARAGE EQUIPMENT H SIEPA HK090E Air operated oil changer 3085 Air operated oil changer Air operated oil changer c/w transparent bowl, wheel mounted reservoir, lever gauge, removable tool tray and standard accessories. 2-In-1 pneumatic waste oil changer & drainer with oil tray. Tank capacity: 90L Suction capacity: 70L Collecting bowl capacity: 18L Collecting bowl diameter: 606mmm Collecting bowl height(adjustable): 1100~ ~1850mm Depressurizing pressure: 7~8 bar Net weight: 3kg The reservoir is equipped with level gauge and removable tool tray (easy to clean). Suction time with hot oil (70 / 80 0 C) and probe diameter 6mm: liters per min. Suction capacity after pulling a vacuum: 35 0 liters Waste oil changer Waste oil receiver with movable trolley wheel c/w standard accessories. Capacity: 80 liters Capacity of transparent bowl: 8 litres Operating air pressure: 0.5 bar Length of drain hose: 2 metres Length of suction hose: 2 metres Lifting type centre column With big oil basin Capacity: 80 liters Weight: 36kg Oil discharge system: Pneumatic 36 *Prices and specifications are subject to change without prior notice.

4 HKA Equipment 08 Air operated oil changer Pneumatic oil changer & waste oil receiver without transparent bowl c/w standard accessories. Lifting type centre column With big oil basin 085 Air operated oil changer Pneumatic oil changer and waste oil receiver c/w standard accessories. Capacity: 80 liters Weight: 36kg Oil discharge system: Pneumatic The reservoir is equipped with level gauge and removable tool tray (easy to clean). Suction time with hot oil (70 / 80 0 C) and probe diameter 6mm: liters per min. Suction capacity after pulling a vacuum: 35 0 liters Air operated oil dispenser Wall-mounted oil dispenser for 180/220 kg trade drums composed of pump art lt/min R. 5:1. Tank capacity: 80 liters Capacity of transparent bowl: 8 liters Operating air pressure: 0.5bar Length of drain hose: 2 meters Length of suction hose: 2 meters Wall-mounted oil dispenser: complete modular solution for single use in fixed position or coupled with centralized systems for dispensing oil stored in drums and/or in tanks. Note: Excluding any installation, commissioning & piping charges. *Prices and specifications are subject to change without prior notice. 37

5 AUTOMOTIVE GARAGE EQUIPMENT Air operated degreaser-tank Air operated degreaser cleaning-tank in stainless steel c/w standard accessories. Basin capacity: 60 liters Tank capacity: 80 liters 7 UNICO 7016 Electric part washer 20gallons electric part washer Recirculation Pump Removable Shelf Air operated grease kit A JOLONG A65G Air operated grease pump For Kegs of 12 30kg with:- Trolley with adjustable supporting base two wheel Pump Adaptor Delivery hose ¼ x metres Grease control valve with outlet flexible / curved steel tube for drums with outside diameter between 300 & 350mmm Follower Plate diameter 30mm for drums with inside diameter 300 & 330mm Use air as power to suck grease into lubrication points. Capacity: 20 Liter. Air inlet pressure: -9kgs/cm. Pressure ratio: 5:1. Grease output pressure: kgs/cm Deliver rate: 30cc/sec. 38 *Prices and specifications are subject to change without prior notice.

6 HKA Equipment 7 JOLONG /HORME S 7003A/HO70M Hand operated gear oil pump Hand operated gear oil pump c/w oil meter, wheel mounted & standard accessories. This hand operated gear oil bucket pump is suitable for high viscosity oils. These devices are normally used filling or topping up motor, gear and differential oil. Specification: - capacity: 20 litres; oil output: 70 cc/cycle; delivery hose length: ½ x 6 feets. J JETMASTER JM High pressure cleaner Technical Specification: - Capacity Working pressure Power requirement 13 L/min (3.3 G.P.M.) 2600 psi (180 bar) 5.5HP/Kw/2800Speed, 15V/3Ph 9 UNICO 9200 Foam machine Caster with brake. Spray gun - aluminum alloy. Pressure gauge-stainless steel. Main body-stainless steel 70L. Connecting to compressor, equipped with 10M long spiral shaped hose, gun and nozzle. Machine to spray cleaning foam. MANUAL VALVE *Prices and specifications are subject to change without prior notice. 39