AGRICULTURE HORTICULTURE GREENHOUSE

Transcription

1 AGRICULTURE HORTICULTURE GREENHOUSE

2 Fertilizer & Chemical injectors are water driven only, with no ( other energy required I n j e c t o r s A step up from Different Models Application Fertigation Water Treatment Supplementation Disinfection and Cleaning of lines and Installations Fertigation for sprinkler systems Irrigation ph and EC control Standard Perfect Blending

3 02-03 How does it work? Water driven, non-electric Piston driven by water flow Solution is added in proportion to water flow for accurate mixing Solution constantly added as water flows through unit Ratio of additive remains constant the past Different Methods External Bypass Chemical Resistant Internal Bypass Chemical Resistant Compact

4 Models TF-5 TF-5-001: Rate of additive: 0.1-1% TF-5-002: 0.2-2% TF-5-005: 0.5-5% Water pressure: ( PSI) Flow Rate: m 3 /h ( GPM) Weight: 5 kg (11 pound) Coupling: 1 or 32 mm * Legs available upon special request TF-10 TF : Rate of additive: 0.1-1% TF : 0.2-2% TF : 1-5% Water pressure: ( PSI) Flow Rate: m 3 /h (2-45 GPM) Weight: 7.38 kg (16.27 pound) Coupling: 1.5 or 50 mm * Legs available upon special request TF-25 TF : Rate of additive: 0.1-1% TF : % TF : 1-5.5% Water pressure: ( PSI) Flow Rate: 2-25 m 3 /h ( GPM) Weight: kg (41.00 pound) Coupling: 2 or 63 mm * Legs - Standard supply

5 04-05, 0.3-2% (2502) Rate of additive: 0.3% to 2% Water Pressure: ( PSI) Flow rate: l/h ( Gal/h) Size: 56x18.5 cm (22 high x 7.27 wide) Weight: 1.8 kg (4 pound) Coupling:, 0.4-4% (2504) Rate of additive: 0.4% - 4% Water Pressure: ( PSI) Flow rate: l/h (8-660 Gal/h) Size: 56x18.5 cm (22 high x 7.27 wide) Weight: 1.8 kg (4 pound) Coupling:, 6% Fix (2506) Fix Rate of additive: 6% Water Pressure: ( PSI) Flow rate: l/h ( Gal/h) Size: 56x18.5 cm (22 high x 7.27 wide) Weight: 1.8 kg (4 pound) Coupling: *All models are supplied with a manual air release. The manual air release allows primary bleeding of air locked in the water supply lines. **All models can be equipped with On-Off mechanism which will shut down additive injection, Allowing a continual water flow.

6 Models, 3-10% (2510) Rate of additive: 3-10% Water Pressure: ( PSI) Flow rate: l/h ( Gal/h) Weight: 3.1 kg (6.8 pound) Coupling:, 0.2% Fix (2500) Rate of additive: 0.2% fixed dosing Water Pressure: ( PSI) Flow rate: l/h ( Gal/h) Weight: 1.8 kg (4 pound) Coupling:, 0.3-2%/0.4-4%/6% Fix Internal By Pass Dosing By Pass Injector Rate of additive: 0.3-2% / 0.4-4% / 6% fix Water Pressure: ( PSI) Flow rate: l/h ( Gal/h) Weight: 1.8 kg (4 pound) Coupling: Optional: External By Pass *All models are supplied with a manual air release. The manual air release allows primary bleeding of air locked in the water supply lines. **All models can be equipped with On-Off mechanism which will shut down additive injection, Allowing a continual water flow.

7 06-07 CAUTION All injectors must have a back-flow prevention valve installed on the inlet side of the injector according to local specifications. Chlorination Models* Water Pressure: () Flow rate: l/h ( Gal/h) Weight: 1.8 kg (4 pound) Coupling: PVDF Models** Water Pressure: () Flow rate from l/h ( Gal/h) Weight: 2 kg (4.4 pound) Coupling: AgroRite 2 Water Treatment unit Water flow up to 25m 3 /h (110 gpm) The system will allow all MixRite units a true proportioning injection. Specially designed for aggressive additives. The system provides constant rate between 2 main line and by pass line. (9:1) * Optional: Unique components are available for injecting active chlorine additives ** Optional: PVDF Body and Hastelloy components are available for very aggressive chemical applications

8 Recommended installations Main Water pipe 1. Main water valve 2. Main water filter 120 Mesh Minimum 3. Pressure Reducing Valve 4. Pressure gauge (recommended) 5. Anti Siphon valve 6. Operation Valve 7. Fertilizer solution tank 10 Main Water pipe 1. Main water valve 2. Main water filter 120 Mesh Minimum 3. Pressure Reducing Valve 4. Throttling valve 5. Combined union& plastic valve 6. 5/16 command line 7. Fertilizer Resistant filter 8. Safety Normally Closed hydraulic valve 9. Anti Siphon valve 10. Fertilizer solution tank

9 08-09 DoRite Parallel installation Mixer with EC/pH Control 1. Main water valve 2. Main water meter 3. Main filter 120 mesh minimum 4. Throttling valve 5. Mixing tank (empty filter) 6. EC/pH probes 7. MixRite injector 8. FlowRite regulator 9. valve 10. Irrigation controller

10 Recommended installations A Combination of main filtration station and MixRite TF injector on a bypass installation. 1. Main Valve 2. Chocking Valve 3. MixRite TF Injector 4. 2 Bypass line A typical double inline installation for MixRite TF models

11 10-11 A Typical Bypass array installation for three MixRite TF model injectors 1. Main water valve 2. Main water filter 3. Chocking Valve 4. Fertilizer Solution Filter 5. Mixing chamber (Empty filter) The OLD manual way Un even distribution refill The NEW automatic way Even distribution Automatic refill A Typical installation for a pressure diluting tank. 1. Chocking Valve 2. Pressure diluting tank A typical bypass installation for a single MixRite TF injector. 1. Chocking Valve 2. MixRite TF Injector 3. Fertilizer Reservoir Tank

12 Cart 25 liter (6.6 gallon capacity) Rubberized pneumatic tyres Hose hook on rear of unit Equipped with a spray gun Can be available with all Models Cat.No PulseRite System Pulse transmiting system The system allows all common professional irrigation controllers to collect the data regarding the amount of fertilizer or additive injected by the MixRite injector. The data transmitted into the controller can be used to record the quantities of fertilizer or additive injected into the irrigation system. The system can fit all MixRite models.

13 12-13 General Technical Information Model Flow Rate Range Pressure Range Dosage Rate % Connectors Diameter Thread Min Max injection rate per hour Remarks 0.2% Fix 0.8% Fix 0.1-0,9% 0,3-2% 0.4-4% 6% Fix 3-10% 0.3-2% by-pass 0.4-4% by-pass 6% by-pass 0.3-2% Internal by-pass 0.4-4% Internal by-pass 6% Internal by-pass TF TF TF TF TF TF TF TF TF l/h to 11 gpm l/h to 11 gpm l/h to 11 gpm l/h to 11 gpm l/h 0.13 t0 11 gpm l/h 0.16 to 11 gpm l/h 0.22 to 11 gpm 2500 l/h 11 gpm 2500 l/h 11 gpm 2500 l/h 11 gpm 2500 l/h 11 gpm 2500 l/h 11 gpm 2500 l/h 11 gpm m 3 /h gpm m 3 /h gpm m 3 /h gpm m 3 /h 2-45 gpm m 3 /h 2-45 gpm m 3 /h 2-45 gpm 2-25 m 3 /h gpm 2-25 m 3 /h gpm 2-25 m 3 /h gpm 0.2% Fix 0.8% Fix % 0.3-2% 0.4-4% 6% Fix 3-10% 0.3-2% 0.4-4% 6% Fix 0.3-2% 0.4-4% 6% Fix 0.1-1% 0.2-2% 0.5-5% 0.1-1% 0.2-2% 1-5% 0.1-1% % 1-5.5% /2 1 1 /2 1 1 / l/h 1.32 gph 20 l/h 5.3 gph 0-20 l/h gph l/h gph l/h gph 150 l/h 39.7 gph l/h gph l/h gph l/h gph 150 l/h 39.7 gph l/h gph l/h gph 150 l/h 39.7 gph l/h gph l/h gph l/h gph l/h gph l/h gph l/h gph l/h gph l/h gph l/h gph BSPT Thread BSPT Thread BSPT Thread BSPT Thread BSPT Thread BSPT Thread BSPT Thread Optional foot valve BSPT External Bypass BSPT External Bypass BSPT External Bypass BSPT Internal Bypass BSPT Internal Bypass BSPT Internal Bypass 32 mm*** 32 mm*** 32 mm*** 50 mm PE Compression Fittings* 50 mm PE Compression Fittings* 50 mm PE Compression Fittings* 63 mm PE Compression Fittings** 63 mm PE Compression Fittings** 63 mm PE Compression Fittings** Optional: PVDF Body and Hastelloy springs components are available for aggressive chemical applications * Optional: 50 mm x 11/12 union thread adaptors ** Optional: 63 mm x 2 /2 1 /2 union thread adaptors *** Optional: 32 mm x 1 union thread adaptors

14 Pressure Loss Tables TF TF TF TF TF TF % 6% Fix 0.4-4% 0.3-2%

15 14-15 Max. injection rate per hour - Models Injection Rate L/h gph MixRite 0.2% Fix MixRite % MixRite 0.3-2% MixRite 0.4-4% MixRite 6% Fix MixRite 3-10% TF TF TF TF TF TF TF TF TF

16 Recommended Accessories 218 (8.6 ) Ø174 (6.8 ) 531 (20.9 ) 291 (11.5 ) FlowGuard Cat. No Pressure Regulator Cat. No hydraulic Normally Closed valve Cat. No MixRite Models MixRite TF-5 Models 250 (9.8 ) Ø208 (8.1 ) Suction foot valve Cat. No Fertiguard Cat. No Plastic Wall mounting bracket cat no For all 3/4 MixRite models 337 (13.3 ) 618 (24.3 ) Static Pressure regulator Cat. No Water Filter Cat. No Plastic wall mounting bracket and stand base cat no For MixRite TF5 & TF10 models MixRite TF-10 Models Anti siphon kit Cat. No Back flow preventor Cat. No Stainless Steel Wall mounting Bracket Cat No For models TF25 Option remote control Option remote control Option MixRite TF-25 Models TEFEN Advanced Plastic Solutions info@tefenplastic.com En