G66 Series API bar (250 psi) for Non-metallic Pump Heads. G66 with Ductile Iron pump head. G66 with Polypropylene pump head.
|
|
- Darleen Simmons
- 5 years ago
- Views:
Transcription
1 G66 Series Maximum Flow Rate: Maximum Pressure: l/min (65.7 gpm) 48 bar (7 psi) for Metallic Pump Heads 17 bar (25 psi) for Non-metallic Pump Heads API 674 ATEX G66 with Ductile Iron pump head G66 with Polypropylene pump head
2 G66 Series Performance Capacities Flow Max. Max. Flow 48 bar (7 psi) G66-X Metering & Dosing Pressure Maximum Inlet Pressure Metallic Pump Heads: 17 bar (25 psi) Non-metallic Pump Heads: 3.5 bar (5 psi) Maximum Discharge Pressure Metallic Pump Heads: 48 bar (7 psi) Non-metallic Pump Heads: 17 bar (25 psi) Polypropylene Performance and specification ratings apply to G66 configurations unless specifically noted otherwise. API 675 Performance Characteristics of Steady State Accuracy ± 1%, Linearity ± 3% and Repeatability ± 3% can be achieved at speeds up to 1 rpm and pressures up to 48 bar (metallic pump heads) for X-cam pumps only. Maximum Flow at Designated Pressure bar (2 psi) 48 bar (7 psi) G66-X Gallons per Minute Liters per Minute Revolutions Per Minute 2
3 G66 Series API 674 Performance Capacities Flow Max. Max. Flow 48 bar (7 psi) G66-X Pressure Maximum Inlet Pressure Metallic Pump Heads: Non-metallic Pump Heads: 17 bar (25 psi) 3.5 bar (5 psi) Performance and specification ratings apply to G66 configurations unless specifically noted otherwise. Maximum Discharge Pressure Metallic Pump Heads: 48 bar (7 1 rpm max. Non-metallic Pump Heads: 17 bar (25 psi) Maximum RPM at Designated Pressure 55 G Pressure (bar) 28 Operation on or below line complies with Item of API-674 G Pump Speed (rpm) 3
4 G66 Series Specifications Flow 14 bar (2 psi) G66-X (Metallic) Flow 17 bar (25 psi) G66-X (Non-metallic) Flow 48 bar (7 psi) G66-X (Metallic) bar (2 psi) Model gal/rev liters/rev G66-X (Metallic) bar (25 psi) Model gal/rev liters/rev G66-X (Non-metallic) bar (7 psi) Model gal/rev liters/rev G66-X (Metallic) Maximum Discharge Pressure Metallic Heads: 48 bar (7 rpm Non-metallic Heads: 17 bar (25 psi) Polypropylene Maximum Inlet Pressure Metallic Heads: 17 bar (25 psi) Non-metallic Heads: 3.5 bar (5 psi) Maximum Operating Temperature Metallic Heads: Non-metallic Heads: Maximum Solids Size Inlet Port Discharge Port Shaft Diameter Shaft Rotation Bearings Oil Capacity Weight Metallic Heads: Non-metallic Heads: 93.3 C (2 F) - Consult factory for correct component selection for temperatures from 71 C (16 F) to 121 C (25 F). 49 C (12 F) - Consult factory for temperatures above 49 C (12 F). 8 microns 3 inch BSPT 3 inch NPT 2-1/2 inch SAE J518 Flange (Non-metallic) 3 inch SAE J518 Flange (Metallic) 1-1/2 inch BSPT 1-1/2 inch NPT 1-1/2 inch SAE 5.8 mm (2 inch) Reverse (bi-directional) Tapered roller bearings 7.5 litres (8 US quarts) 226 kg (5 lbs.) 133 kg (295 lbs.) Calculating Required Power 1 x rpm + gpm x psi = electric motor hp 63, 1,46 1 x rpm + l/min x bar = electric motor kw 84, Calculating Pulley Size motor pulley OD = pump rpm When using a variable frequency drive (VFD) controller, calculate the hp or kw at minimum and maximum pump speed to ensure the correct hp or kw motor is selected. Note that motor manufacturers typically de-rate the service factor to 1. when operating with a VFD. Net Positive Suction Head (NPSHr) NPSHr (feet of water) pump pulley OD motor rpm Revolutions Per Minute NPSHr (meters of water) Self-priming: Each Hydra-Cell pump has different lift capability depending on model size, cam angle, speed, and fluid characteristics. To ensure that your specific lift characteristics are met, refer to the inlet calculations regarding friction, and acceleration head losses in your Hydra-Cell Installation & Service Manual. Compare those calculations to the NPSHr curves above. 4
5 G66 Series Representative Drawings G66 Models with BSPT Inlet/Outlet Ports mm (Inches) 12 7) Outlet 1 1/2 BSPT or 1 1/2 NPT Ø (14.78) Inlet 3 BSPT or 3 NPT 345. (13.59) (18.44) (6.5) (11.53) (23.47) W576 Outlet 1 1/2 BSPT or 1 1/2 NPT Ø 5.8 (2.) 12.7 (.5) Ø (14.78) Inlet 3 BSPT or 3 NPT (6.81) (6.5) (11.53) Metallic pump head models shown. Note: Contact factory for additional drawings of specific models and configurations. 5
6 G66 Series Representative Drawings G66 Models with SAE Flange Inlet/Outlet Ports mm (Inches) (23.47) Outlet 1 1/2 SAE J518 Ø 5.8 (2.) 12.7 (.5) Inlet 3 SAE J518 Ø (14.78) 345. (13.59) (18.44) (6.81) (6.5) (11.53) Metallic pump head models shown. G66 Models with SAE Flange Inlet/Outlet Ports mm (Inches) (23.) 37.1 (1.46) Outlet 1 1/2 SAE J518 W575 Ø 5.8 (2.) 12.7 (.5) 43.5 (1.71) (13.62) (18.44) Inlet 2 1/2 SAE J (7.12) (6.81) (6.5) (11.53) Non-metallic pump head models shown. Note: Contact factory for additional drawings of specific models and configurations. 6
7 G66 Series How to Order Ordering Information G 6 6 X K A complete G66 Series Model Number contains 12 digits including 7 customer-specified design and materials options, for example: G66XKDGHFEPA. Order Digit Code Description 1-3 Pump Configuration G66 Shaft-driven 4 Hydraulic End Cam X Max l/min ( rpm 5 Pump Head Version K Kel-Cell BSPT Ports or SAE Flanges 6 Pump Head Material B Brass D Ductile Iron (Nickel-plated) N Polypropylene (with Hastelloy C followers and follower screws) P Polypropylene (with 316 SST followers and follower screws) S 316L Stainless Steel 7 Diaphragm & O-ring Material G FKM T Buna-N 8 Valve Seat Material H 17-4 Stainless Steel N Nitronic 5 T Hastelloy C 9 Valve Material F 17-4 Stainless Steel N Nitronic 5 T Hastelloy C 1 Valve Springs E Elgiloy H 17-7 Stainless Steel 11 Valve Spring Retainers C Celcon M PVDF P Polypropylene 12 Hydra-Oil A 1W3 standard-duty oil H 15W5 high-temp severe-duty synthetic oil 7
8 WANNER Partners in over 7 Countries WANNER ENGINEERING - WORLD HEADQUARTERS & MANUFACTURING Minneapolis USA t: (612) e: sales@wannereng.com WANNER PUMPS Kowloon HONG KONG t: e: sales@wannerpumps.com WANNER ENGINEERING Latin American Office t: +55 (11) e: sales@wannereng.com WANNER PUMPS Shanghai CHINA t: e: sales@wannerpumps.com WANNER INTERNATIONAL Hampshire UK t: +44 () e: sales@wannerint.com
G15 Series API bar (2500 psi) for Metallic Pump Heads. G15 for horizontal installations shown with Stainless Steel pump head.
G15 Series Maximum Flow Rate: Maximum Pressure: 58.7 l/min (15.5 gpm) 172 bar (2500 psi) for Metallic Pump Heads API 674 ATEX G15 for horizontal installations shown with Stainless Steel pump head. G15
More informationG03 Mono-Block Series
G03 Mono-Block Series Maximum Flow Rate: 11.7 l/min (3.1 gpm) Maximum Pressure: 103 bar (1500 psi) for Metallic Pump Heads ATEX Mono-Block (G03) Shaft-driven with Stainless Steel pump head Mono-Block (G03)
More informationG35 Series API bar (1500 psi) for Metallic Pump Heads. G35 with Stainless Steel pump head and SAE flanges. G35 with Brass pump head
G35 Series Maximum Flow Rate: Maximum Pressure: 138 l/min (36.5 gpm) 103 bar (1500 psi) for Metallic Pump Heads API 674 ATEX G35 with Stainless Steel pump head and SAE flanges G35 with Cast Iron pump head
More information103 bar (1500 psi) for Metallic Pump Heads
G35 Series Maximum Flow Rate: Maximum Pressure: 138 l/min (36.5 gpm) 13 bar (15 psi) for Metallic Pump Heads API 674 ATEX G35 with Stainless Steel pump head and SAE flanges G35 with Brass pump head G35
More informationG20 Series. 24 bar (350 psi) for Non-metallic Pump Heads. G20 Close-coupled with Brass pump head ATEX. G20 Version 5 10/16
G20 Series Maximum Flow Rate: Maximum Pressure: 3.8 l/min (1.0 gpm) 103 bar (1500 psi) for Metallic Pump Heads 24 bar (350 psi) for Non-metallic Pump Heads ATEX G20 Close-coupled with Brass pump head G21
More information69 bar (1000 psi) for Metallic Pump Heads 24 bar (350 psi) for Non-metallic Pump Heads
G25 Series Maximum Flow Rate: Maximum Pressure: 76 l/min (20.0 gpm) 69 bar (1000 psi) for Metallic Pump Heads 24 bar (350 psi) for Non-metallic Pump Heads API 674 ATEX G25 with Cast Iron pump head G25
More informationG10 Series API bar (350 psi) for Non-metallic Pump Heads. G10 with Cast Iron pump head
G10 Series Maximum Flow Rate: Maximum Pressure: 33.4 l/min (8.8 gpm) 103 bar (1500 psi) for Metallic Pump Heads 24 bar (350 psi) for Non-metallic Pump Heads API 674 ATEX G10 with Cast Iron pump head G10
More informationG25 Series API bar (350 psi) for Non-metallic Pump Heads. G25 with Cast Iron pump head
G25 Series Maximum Flow Rate: Maximum Pressure: 76 l/min (20.0 gpm) 69 bar (1000 psi) for Metallic Pump Heads 24 bar (350 psi) for Non-metallic Pump Heads API 674 ATEX G25 with Cast Iron pump head G25
More informationG10 Series API bar (350 psi) for Non-metallic Pump Heads. G10 with Cast Iron pump head
G10 Series Maximum Flow Rate: Maximum Pressure: 33.4 l/min (8.8 gpm) 103 bar (1500 psi) for Metallic Pump Heads 24 bar (350 psi) for Non-metallic Pump Heads API 674 ATEX G10 with Cast Iron pump head G10
More informationG03 Series. 24 bar (350 psi) for Non-metallic Pump Heads. G03 Shaft-driven with Stainless Steel pump head
G03 Series Maximum Flow Rate: Maximum Pressure: 11.7 l/min (3.1 gpm) 103 bar (1500 psi) for Metallic Pump Heads 24 bar (350 psi) for Non-metallic Pump Heads ATEX G03 Shaft-driven with Stainless Steel pump
More informationG04 Series. Maximum Flow Rate: 11.2 l/min (2.9 gpm) Maximum Pressure: 200 bar (2900 psi) for Metallic Pump Heads. G04 with Stainless Steel pump head
G04 Series Maximum Flow Rate: 11.2 l/min (2.9 gpm) Maximum Pressure: 200 bar (2900 psi) for Metallic Pump Heads ATEX G04 with Stainless Steel pump head G04 with Brass pump head G04 with Stainless Steel
More informationVersatile, Reliable Pumps for a Wide Range of Applications D66 Series
Versatile, Reliable Pumps for a Wide Range of Applications D66 Series Pumps the full spectrum of low-to-high viscosity fluids. Features a seal-less design and horizontal disk check valves that enable the
More informationG20 Series. G20 Close-coupled with Brass pump head ATEX. G20 Version 1 01/15
G20 Series Maximum Flow Rate: 3.8 l/min (1.0 gpm) Maximum Pressure: 103 bar (1500 psi) for Metallic Pump Heads 24 bar (350 psi) for Non-metallic Pump Heads AEX G20 Close-coupled with Brass pump head G21
More informationVersatile, Reliable Pumps for a Wide Range of Applications D35 Series
Versatile, Reliable Pumps for a Wide Range of Applications D35 Series Pumps the full spectrum of low-to-high viscosity fluids. Features a seal-less design and horizontal disk check valves that enable the
More informationVersatile, Reliable Pumps for a Wide Range of Applications H25 Series
Versatile, Reliable Pumps for a Wide Range of Applications H25 Series Pumps the full spectrum of low-to-high viscosity fluids. Features a seal-less design and horizontal disk check valves that enable the
More informationVersatile, Reliable Pumps for a Wide Range of Applications D10 Series
Versatile, Reliable Pumps for a Wide Range of Applications D10 Series Pumps the full spectrum of low-to-high viscosity fluids. Features a seal-less design and horizontal disk check valves that enable the
More informationG10 Series API bar (350 psi) for Non-metallic Pump Heads. G10 with Cast Iron pump head
G1 Series Maximum Flow Rate: Maximum Pressure: 33.4 l/min (8.8 gpm) 13 bar (15 psi) for Metallic Pump Heads 24 bar (35 psi) for Non-metallic Pump Heads API 674 ATEX G1 with Cast Iron pump head G1 with
More informationT100 Series Medium Pressure Models T100K & T100M
T100 Series Medium Pressure Models T100K & T100M Maximum Flow Rate: Maximum Pressure: 170 l/min (45 gpm) 241 bar (3500 psi) API 674 ATEX T100 Series medium pressure model with Stainless Steel pump head
More informationT100 Series Medium Pressure Models T100K & T100M
T100 Series Medium Pressure Models T100K & T100M Maximum Flow Rate: Maximum Pressure: 170 l/min (45 gpm) 1543 BPD 241 bar (3500 psi) API 674 ATEX T100 Series medium pressure model with Stainless Steel
More informationT100 Series Low Pressure Models T100E, T100F & T100H
T100 Series Low Pressure Models T100E, T100F & T100H Maximum Flow Rate: Maximum Pressure: 366 l/min (96 gpm) 145 bar (2100 psi) API 674 T100 Series low pressure model with Stainless Steel pump head Available
More informationVersatile, Reliable Pumps for a Wide Range of Applications M03 Mono-Block Series
Versatile, Reliable Pumps for a Wide Range of Applications M03 Mono-Block Series Pumps the full spectrum of low-to-high viscosity fluids. Features a seal-less design and horizontal disk check valves that
More informationVersatile, Reliable Pumps for a Wide Range of Applications M03 Series
Versatile, Reliable Pumps for a Wide Range of Applications M03 Series Pumps the full spectrum of low-to-high viscosity fluids. Features a seal-less design and horizontal disk check valves that enable the
More informationG03 Series Dosing Range
G03 Series Dosing Range Maximum Flow Rate: Maximum Pressure: up to 462 l/hr (122 gph) up to 103 bar (1500 psi) for Metallic Pump Heads up to 24 bar (350 psi) for Non-metallic Pump Heads AEX G13-M2M with
More informationVersatile, Reliable Pumps for a Wide Range of Applications M03 Series
Versatile, Reliable Pumps for a Wide Range of Applications M03 Series Pumps the full spectrum of low-to-high viscosity fluids. Features a seal-less design and horizontal disk check valves that enable the
More informationF20 Series. Maximum Flow Rate: 1.0 gpm (3.8 l/min) Maximum Pressure: 1500 psi (103 bar) for Metallic Pump Heads
F2 Series Maximum Flow Rate: 1. gpm (3.8 l/min) Maximum Pressure: 15 psi (13 bar) for Metallic Pump Heads F2 Series Performance Capacities Max. Max. Flow Input @ 1 psi (69 bar) Model rpm gpm l/min F2-E
More informationT100 Series Medium Pressure Models T100K & T100M
T100 Series Medium Pressure Models T100K & T100M Maximum Flow Rate: 45 gpm (170.4 l/min) Maximum Pressure: 3500 psi (241 bar) T100 Series medium pressure model with Nickel Aluminum Bronze pump head Available
More informationD15/D17 Series psi (172 bar) for Metallic Pump Heads
15/17 Series Maximum Flow Rate: Maximum Pressure: 15.5 gpm (58.7 l/min) 25 psi (172 bar) for Metallic Pump Heads 15/17 Series Performance Capacities Flow Pressure Model Max. Input rpm gpm l/min Max. Inlet
More informationT100 Series Medium Pressure Models T100K & T100M
T100 Series Medium Pressure Models T100K & T100M Maximum Flow Rate: Maximum Pressure: 45 gpm (170.4 l/min) 1543 BPD 3500 psi (241 bar) T100 Series medium-pressure model with Nickel Aluminum Bronze pump
More informationT100 Series High Pressure
T100 Series High Pressure Maximum Flow Rate: 26 gpm (98.4 l/min) Maximum Pressure: T100 Series high pressure model with Nickel Aluminum Bronze pump head Available to Meet API 674! Seal-less design eliminates
More informationT100 Series Low Pressure Models T100E, T100F & T100H
T100 Series Low Pressure Models T100E, T100F & T100H Maximum Flow Rate: Maximum Pressure: 96 gpm (366.1 l/min) 3292 BPD 2100 psi (145 bar) T100 Series low-pressure model with Nickel Aluminum Bronze (NAB)
More informationM03 Series. Maximum Flow Rate: 3.1 gpm (11.7 l/min) Maximum Pressure: 1200 psi (83 bar) for Metallic Pump Heads
M3 eries Maximum Flow Rate: 3.1 gpm (11.7 l/min) Maximum Pressure: 12 psi (83 bar) for Metallic Pump Heads M3 eries Performance Capacities Max. Max. Flow Input @ 1 psi (69 bar) Maximum Inlet Pressure Model
More informationD/G-35 Series. Up to 37gpm (140 l/min) D/g-35 hydra-cell diaphragm pump. D/G-35 Specialized Designs
D/g-35 hydra-cell diaphragm pump D/G-35 Series Up to 37gpm (14 l/min) D/G-35 Specialized Designs Hydra-Cell Slurry Duty pumps are specifically designed for abrasive slurry applications. See page 8 for
More informationH25 Series. Maximum Flow Rate: 20.0 gpm (75.9 l/min) Maximum Pressure: 1000 psi (69 bar) for Metallic Pump Heads
25 Series Maximum Flow Rate: 2. gpm (75.9 l/min) Maximum Pressure: 1 psi (69 bar) for Metallic Pump eads 25 Series Performance apacities Max. Max. Flow Input @ 1 psi (69 bar) Model rpm gpm l/min 25-115
More informationD/G-12 Series. Up to 8 gpm (30.3 l/min)
D/G-12 Series Up to 8 gpm (3.3 l/min) D/G-12 Vertical Applications The D/G-12 is specifically designed for vertical pumping installations such as machine tool cooling applications. D/G-12 shown with Hydra-Cell
More informationH/G-25 Series. Up to 20 gpm (75.7/min) H/G-25 Specialized Designs
H/G-25 Series Up to 2 gpm (75.7/min) H/G-25 Specialized Designs Hydra-Cell Slurry Duty pumps are specifically designed for abrasive slurry applications. See page 8 for complete specifications. The H-25
More informationH/G-25 Series. Up to 20 gpm (75.7/min) H/g-25 hydra-cell diaphragm pump. H/G-25 Specialized Designs
H/g-25 hydra-cell diaphragm pump H/G-25 Series Up to 2 gpm (75.7/min) H/G-25 Specialized Designs Hydra-Cell Slurry Duty pumps are specifically designed for abrasive slurry applications. See page 8 for
More informationMT8 Pump. Triplex Metering Pump with Pulse-Free Linear Flow
Maximum Flow Rate: Minimum Flow Rate: Maximum Pressure: 8.00 gph (30.28 lph) 0.06 gph (0.227 lph) 3500 psi (241 bar) MT8 with Stainless Steel pump head Hydra-Cell Metering Solutions pumps exceed API 675
More informationD/G-10 Series. Up to 8 gpm (30.3 l/min) D/g-10 hydra-cell diaphragm pump. D/G-10 Specialized Designs
D/g-1 hydra-cell diaphragm pump D/G-1 Series Up to 8 gpm (3.3 l/min) D/G-1 Specialized Designs Hydra-Cell Slurry Duty pumps are specifically designed for abrasive slurry applications. See page 8 for complete
More informationHydra-Cell T80 Series Pumps Design Advantages
Hydra-Cell T80 Series Pumps Design Advantages An Economical and Environmental Choice Hydra-Cell is a positive displacement, multiple-diaphragm pump featuring a seal-less design that provides full containment
More informationD/G-04 Series. Up to 3.0 gpm (11.3 l/min)
D/G-4 Series Up to 3. gpm (11.3 l/min) 42 United States Instant Information: United Kingdom D/G-4 Series Performance flow max max flow input model gpm l/min rpm D/G-4-X 2.9 11. 175 D/G-4-E 2.1 7.8 175
More informationHydracel High Pressure Pump
Hydracel High Pressure Pump Mfg: Hydracell Model: D10 SL SE SHEHC Stock No. HDPH038.5a Serial No. 99260 Hydracell High pressure Pump. Model D10 SL SE SHEHC, S/N 99260. Inlet (1) 1-1/2 in., Outlet (1) 1
More informationF/G-20 Series. Up to 1.0 gpm (3.8 l/min) f/g-20 hydra-cell diaphragm pump
f/g-20 hydra-cell diaphragm pump F/G-20 Series Up to 1.0 gpm (3.8 l/min) F/G-22 with Pump/Motor Adapter for coupling to NEMA C-Face and IEC B5 Flange motors F/G-20 hollow shaft for close coupling with
More informationCondensed Catalog. Seal-less Pumps
Condensed Catalog Seal-less Pumps Hydra-Cell F/M/D/H Series Seal-less Pumps Hydra-Cell T and Q Series Pumps Hydra-Cell P Series Seal-less Metering Pumps Due to the Wanner Engineering Continuous Improvement
More informationModels: D-03, G-03, G-13 and M-03
Parts Manual D03-991-2402C Models: D-03, G-03, G-13 and M-03 Kel-Cell and Standard Versions IMPORTANT Record your pump model number and serial number here for easy reference: Model No. Serial No. Date
More informationINDUSTRIAL PUMPS MODEL: D-35 PARTS MANUAL WANNER ENGINEERING, INC. IMPORTANT
PARTS MANUAL INDUSTRIAL PUMPS IMPORTANT Record your pump model number and serial number here for easy reference: MODEL: D-35 Model No. Serial No. Date of Purchase When ordering parts or making inquiries
More informationSD Series. Slurry Duty Pumps. Hydra-Cell Slurry Duty pumps are specifically designed for abrasive duty applications in order to:
SD Series Slurry Duty Pumps Hydra-Cell Slurry Duty pumps are specifically designed for abrasive duty applications in order to: Increase flow Reduce and simplify maintenance Extend pump life Provide quiet
More informationModels: G-25, H-25 With Non-Metallic Pump Head
Parts Manual G25-991-2403B Models: G-25, H-25 With Non-Metallic Pump Head WANNER ENGINEERING, INC. W0193B 1204 Chestnut Avenue, Minneapolis, MN 55403 TEL: (12) 332-581 FAX: (12) 332-937 TOLL-FREE FAX [US
More informationModels: G-25, H-25 With Metallic Pump Head
Parts Manual G5-99-40C Models: G-5, H-5 With Metallic Pump Head W09B WANNER ENGINEERING, INC. 04 Chestnut Avenue, Minneapolis, MN 55403 TEL: () 33-58 FAX: () 33-937 TOLL-FREE FAX [US only]: (800) 33-8
More informationSD Series. Slurry Duty Pumps. sd - Slurry duty hydra-cell diaphragm pump
sd - Slurry duty hydra-cell diaphragm pump SD Series Slurry Duty Pumps Hydra-Cell Slurry Duty pumps are specifically designed for abrasive duty applications in order to: Increase flow Reduce and simplify
More informationModels: D-12, G-12. Parts Manual D D WANNER ENGINEERING, INC.
Parts Manual D12-991-2402D Models: D-12, G-12 IMPORTANT Record your pump model number and serial number here for easy reference: Model No. Serial No. Date of Purchase When ordering parts or making inquiries
More informationHydra-Cell Metering Accessories and Options
Hydra-Cell Metering Accessories and Options P Series System Illustration PULSATION DAMPENER (OPTIONAL) BACK PRESSURE VALVE RELIEF VALVE (To process) PRESSURE GAUGE CALIBRATION CYLINDER CONTROLLERS & MOTORS
More informationMODELS: G-20, G-21, G-22
PARTS MANUAL G20-991-2402A IMPORTANT Record your pump model number and serial number here for easy reference: Model No. MODELS: G-20, G-21, G-22 Serial No. Date of Purchase When ordering parts or making
More informationMT8 Metering Pump. Installation, Operation & Maintenance Chestnut Avenue, Minneapolis, MN 55403
TM MT8 Metering Installation, Operation & Maintenance 190-1204 Chestnut Avenue, Minneapolis, MN 55403 T e l : (612) 3 32-5 6 81 F a x : (612) 3 32-6 9 37 Toll-free fax [US only]: (800) 332-6812 www.hydra-cell.com/metering
More informationChemical and Petrochemical Process
Seal-less Pump Technology Chemical and Petrochemical Process Rugged reliability with precision Chemical and Petrochemical - with Dosing, injection, metering, spraying and transfer Compact seal-less Hydra-Cell
More informationModels: D66. Installation, Operation & Maintenance A1
Installation, Operation & Maintenance 210-800A1 Models: D66 W0577A 1204 Chestnut Avenue, Minneapolis, MN 55403 Tel: (612) 332-5681 Fax: (612) 332-6937 Toll-free fax [US only]: (800) 332-6812 www.hydra-cell.com/metering
More informationINDUSTRIAL PUMPS MODEL: D-35-SD PARTS MANUAL SLURRY DUTY PUMP WANNER ENGINEERING, INC. IMPORTANT
PARTS MANUAL INDUSTRIAL PUMPS IMPORTANT Record your pump model number and serial number here for easy reference: Model No. MODEL: D-35-SD SLURRY DUTY PUMP Serial No. Date of Purchase When ordering parts
More informationP400 Metering Pump. Installation, Operation & Maintenance P C. Metallic pump shown W0014B
TM P400 Metering Pump Installation, Operation & Maintenance P400-991-2400C W0014B Metallic pump shown 1204 Chestnut Avenue, Minneapolis, MN 55403 Tel: (612) 332-5681 Fax: (612) 332-6937 Toll-free fax [US
More informationC Series Valves C24 1-1/4 NPT C23 1 NPT C22 3/4 NPT. C22/C23/C24 Series. Stainless Steel Off-Line Brass Off-Line. Brass In-Line.
C Series Valves Accurate, repeatable Minimal pressure surge Smooth, chatter-free bypass Adjustable Easy to service No external springs or moving parts Various seal material Stainless steel or brass bodies
More informationMODEL: G-25 WITH METALLIC PUMP HEAD
PARTS MANUAL G25-991-2402B MODEL: G-25 WITH METALLIC PUMP HEAD IMPORTANT Record your pump model number and serial number here for easy reference: Model No. Serial No. Date of Purchase When ordering parts
More informationModels: D-03, G-03, G-13, M-03 and M-23 Mono-Block Kel-Cell Versions
Parts Manual D03-991-2406 Models: D-03, G-03, G-13, M-03 and M-23 Mono-Block Kel-Cell Versions IMPORTANT Record your pump model number and serial number here for easy reference: Model No. Serial No. Date
More informationSeal-less Pump Technology
Seal-less Pump Technology Hydra-Cell G Series Seal-less Pumps Hydra-Cell T Series Seal-less Pumps Hydra-Cell P Series Seal-less Metering Pumps 1 www.hydra-cell.eu Hydra-Cell Seal-less Pumps Contents Page
More informationINDUSTRIAL PUMPS PARTS MANUAL MODELS: M-03 D-03 M-23 M-24 G-03 G-13 WANNER ENGINEERING, INC. IMPORTANT
PARTS MANUAL IMPORTANT Record your pump model number and serial number here for easy reference: INDUSTRIAL PUMPS MODELS: M-03 D-03 M-23 M-24 G-03 G-13 Model No. Serial No. Date of Purchase When ordering
More informationModel: D-10. Parts Manual D B. with non-metallic pump head WANNER ENGINEERING, INC. IMPORTANT
Parts Manual D10-991-2403B Model: D-10 with non-metallic pump head IMPORTANT Record your pump model number and serial number here for easy reference: Model No. Serial No. Date of Purchase When ordering
More informationSelection Guide for P Series Pump Accessories & Options
Selection Guide for P Series Pump Accessories & Options Contents Page Calibration Cylinders...2 Back Pressure & Pressure Relief Valves...3 Pulsation Dampeners...6 Motors & Controllers...9 Calibration Cylinders
More informationSeal-less Pump Technology
Seal-less Pump Technology Hydra-Cell G Series Seal-less Pumps Hydra-Cell T Series Seal-less Pumps Hydra-Cell Q Series Seal-less Pumps Hydra-Cell P Series Seal-less Metering Pumps 1 www.hydra-cell.eu Hydra-Cell
More informationC Series Valves C24 1-1/4 NPT/BSPT C23 1 NPT/BSPT C22 3/4 NPT/BSPT. C22/C23/C24 Series (See page 88)
C Series Valves Accurate, repeatable Minimal pressure surge Smooth, chatter-free bypass Adjustable Easy to service No external springs or moving parts Various seal material Stainless steel or brass bodies
More informationWANNER ENGINEERING INC
Industrial Pumps WANNER ENGINEERING INC Durability, performance and simplicity of design make Hydra-Cell pumps the optimum choice for the widest range of pump applications. When we say Simply Built to
More informationAccurate Metering and Superior Handling of Abrasives in the Manufacture of Engineered Wood Products. Engineered Wood
Accurate Metering and Superior Handling of Abrasives in the Manufacture of Engineered Wood Products Engineered Wood Pressure Injecting and Mixing Transfer Spraying Metering and Dosing Hydra-Cell Pumps
More informationHigh-Pressure Machine Tool Coolant Pumps with Superior Handling of Abrasive Fines and Metal Particles. Machine Tool Coolant
High-Pressure Machine Tool Coolant Pumps with Superior Handling of Abrasive Fines and Metal Particles Machine Tool Coolant High-Pressure Coolant Delivery Hydra-Cell Pumps for Machine Tool Coolant Compact,
More informationModels: D35, G35. Installation, Operation & Maintenance D B
Installation, Operation & Maintenance D35-991-2400B Models: D35, G35 W0172B 1204 Chestnut Avenue, Minneapolis, MN 55403 Tel: (612) 332-5681 Fax: (612) 332-6937 Toll-free fax [US only]: (800) 332-6812 www.hydra-cell.com/metering
More informationReliable Pumps for Oil and Gas Processing with No Seals or Packing to Leak or Replace. Oil & Gas Processing
Reliable Pumps for Oil and Gas Processing with No Seals or Packing to Leak or Replace Oil & Gas Processing Hydra-Cell Pumps for Oil & Gas Processing Pressure Injecting and Mixing Transfer Spraying Metering
More informationPOMPE À DIAPHRAGME DIAPHRAGM PUMP ASYBCO
POMPE À DIAPHRAGME DIAPHRAGM PUMP ASYBCO DIAPHRAGM PUMP Hydra-Cell Features Heavy-duty industrial construction Quiet, smooth operation Hydraulically balanced diaphragms Runs dry without damage Positive
More informationMetering Pumps with Pulse-Free Linear Flow
Metering Pumps with Pulse-Free Linear Flow Hydra-Cell Metering Solutions Contents Page An Extraordinary Metering Pump...3 Applications & Markets Served...4 Operational & Cost Advantages Electronic Flow
More informationSeal-less Pump Technology
Seal-less Pump Technology Hydra-Cell G Series Seal-less Pumps Hydra-Cell T Series Seal-less Pumps Hydra-Cell P Series Seal-less Metering Pumps 1 www.hydra-cell.eu Hydra-Cell Seal-less Pumps Contents Page
More informationSeal-less Pump Technology. Oil and Gas. Robust design - Reliability
Seal-less Pump Technology Oil and Gas Robust design - Reliability Hydra-Cell Oil & Gas Industry Pumps - High reliability, Gas Extraction Produced water injection Produced water disposal Well dewatering
More informationValve Accessories NEW! Wanner Engineering Inc
Valve Accessories NEW! Wanner Engineering Inc Back Pressure Valves Diaphragm Back Pressure Valves enhance the performance of precision metering systems by applying a continuous back pressure to the EPM
More informationMetering Pumps with Pulse-Free Linear Flow
Metering Pumps with Pulse-Free Linear Flow Hydra-Cell Metering Solutions Contents Page An Extraordinary Metering Pump...3 Applications & Markets Served...4 Operational & Cost Advantages Electronic Flow
More informationP200 Metering Pump. Installation & Service P A WANNER ENGINEERING, INC. Metallic Pump shown (Motor Optional)
P200 Metering Pump Installation & Service P200-991-2400A WANNER ENGINEERING, INC. Metallic Pump shown (Motor Optional) 1204 Chestnut Avenue, Minneapolis, MN 55403 TEL: (612) 332-5681 FAX: (612) 332-6937
More informationINDUSTRIAL PUMPS PARTS MANUAL. MODELS: C-22, C-23, C-24 Bypass Pressure Regulating Valves WANNER ENGINEERING, INC. IMPORTANT
PARTS MANUAL IMPORTANT Record your pump model number and serial number here for easy reference: Model No. Serial No. Date of Purchase When ordering parts or making inquiries about this pump, please mention
More informationWater and Waste Water Treatment
Seal-less Pump Technology Water and Waste Water Treatment Economy through Technology Hydra-Cell Water Treatment Pumps Compact, seal-less, Disinfection Sodium Hypochlorite Chlorine Dioxide Hydrogen Peroxide
More informationHusky 3275 Aluminum Pumps Air-Operated Double-Diaphragm
Husky 3275 Aluminum Pumps Air-Operated Double-Diaphragm Features or bspt is externally serviceable Typical Applications Husky 3275 Aluminum DK3XXX Typical Fluids Handled 50 PROCESS EQUIPMENT CATALOG Husky
More informationPulsation Dampeners NEW! Wanner Engineering Inc
Pulsation Dampeners NEW! Wanner Engineering Inc Pulsation Dampeners Positive Displacement (PD) pumps create pulsation and hydraulic shock due to the reciprocating nature of their stroking action, potentially
More informationOil & Gas Processing. Seal-less Pumps. Reliable Pumps for Oil and Gas Processing with No Seals or Packing to Leak or Replace
Oil & Gas Processing Seal-less Pumps Reliable Pumps for Oil and Gas Processing with No Seals or Packing to Leak or Replace Pressure Injecting and Mixing Transfer Spraying Metering and Dosing Hydra-Cell
More informationP300 Metering Pump. Installation & Service P A WANNER ENGINEERING, INC.
P300 Metering Pump Installation & Service P300-991-2400A WANNER ENGINEERING, INC. 1204 Chestnut Avenue, Minneapolis, MN 55403 TEL: (612) 332-5681 FAX: (612) 332-6937 TOLL-FREE FAX [US only]: (800) 332-6812
More informationP100 Metering Pump. Installation & Service P A WANNER ENGINEERING, INC. Metallic Pump shown (Motor Optional)
P100 Metering Pump Installation & Service P100-991-2400A WANNER ENGINEERING, INC. Metallic Pump shown (Motor Optional) 1204 Chestnut Avenue, Minneapolis, MN 55403 TEL: (612) 332-5681 FAX: (612) 332-6937
More informationElectronic Precision Metering. Built to exceed API 675 performance standards with pulse-free linear flow
Electronic Precision Metering Built to exceed API 675 performance standards with pulse-free linear flow Contents Page(s) Introduction....................................... 3 Markets Served.....................................
More informationSingle, oversized roller compresses a low friction hose through a full 360-degrees of rotation
Graco EP Series Peristaltic Hose Pump Technology Single, oversized roller compresses a low friction hose through a full 360-degrees of rotation More flow per revolution than conventional designs Inexpensive
More informationNDP-50 Specifications
NDP-50 Specifications Port Dimensions Intake & discharge connection: (164 GPM Max.) Polypropylene (PPG) 2" ANSI B16.5 #150 Kynar (PVDF) 2" ANSI B16.5 #150 Aluminum (ADC-12) 2" ANSI B16.5 #150 (with tapped
More informationHusky 716 Metal Pumps Air-Operated Double-Diaphragm
Husky 716 Metal Pumps Air-Operated Double-Diaphragm Features capability for even lower noise levels externally serviceable Husky 716 Aluminum D53XXX or D43XXX Typical Applications Typical Fluids Handled
More informationModels: G25, H25. Installation, Operation & Maintenance G C W0452
Installation, Operation & Maintenance G25-991-2400C Models: G25, H25 W0452 1204 Chestnut Avenue, Minneapolis, MN 55403 Tel: (612) 332-5681 Fax: (612) 332-6937 Toll-free fax [US only]: (800) 332-6812 www.hydra-cell.com/metering
More informationAIR OPERATED DOUBLE DIAPHRAGM PUMP
DF5 Metallic pumps 3 For fluid transfer and distribution systems. 5 l/min, 14 US gpm 1/2 fluid port. Very robust construction, the pump is fully enclosed in an aluminum shield. Lubricants, waste oil, antifreeze,
More informationChemical and Petrochemical Process
Seal-less Pump Technology Chemical and Petrochemical Process Rugged reliability with precision Chemical and Petrochemical Industry Compact seal-less Hydra-Cell pumps for long life and high reliability.
More informationT80 Series Medium Pressure Models: T80K, T80M
Installation & Service 177-999F T80 Series Medium Pressure Models: T80K, T80M Flange Shown W0499C 1204 Chestnut Avenue, Minneapolis, MN 55403 Tel: (612) 332-5681 Fax: (612) 332-6937 Toll-free fax [US only]:
More informationDurability, performance and simplicity of design make Hydra-CelfB pumps the optimum choice for the widest range of pum applications.
Durability, performance and simplicity of design make Hydra-CelfB pumps the optimum choice for the widest range of pum applications. When we say "Simply Built to Last", we mean it! Wanner Engineering Hydra-Cell
More informationNDP-25 Specifications
NDP-25 Specifications Port Dimensions (46.2 GPM Max.) Intake & discharge connection: Polypropylene (PPG) Kynar (PVDF) Aluminum (ADC-12) Stainless Steel (316) Cast Iron Air inlet (incl. ball valve): Air
More informationSP SERIES SELF-PRIMING MAG DRIVE
SP SERIES SELF-PRIMING MAG DRIVE spend less time waiting. and more time pumping. year Big on power yet short on energy consumption, the SP Series from Finish Thompson is one of the most versatile and economical
More informationSingle, oversized roller compresses a low friction hose through a full 360-degrees of rotation
Graco EP Series Peristaltic Hose Pump Technology Single, oversized roller compresses a low friction hose through a full 360-degrees of rotation More flow per revolution than conventional designs Inexpensive
More information12 French Drive Mono, ON Canada L9W 5W1 Ph Toll Free Fax
CONTROL HANDLES AND ELECTRONIC METERS 12 French Drive Mono, ON Canada L9W 5W1 Ph. 519-942-8800 Toll Free 1-800-252-5636 Fax 519-942-4799 info@appliedlubrication.com oil Electronic meter RAASM s electronic
More informationGLYCOL PUMPS ELECTRIC PUMPS
APPLICATIONS: Circulating pump for gas glycol dehydrators, gas amine units and other pumping applications. FEATURES: No Gas Emissions No Packing Hydraulically Balanced Diaphragms Inline Service Pulse-Free
More informationT100 Series High Pressure
Installation, Operation & Maintenance 177-998D T100 Series High Pressure Model: T100S W0542B 1204 Chestnut Avenue, Minneapolis, MN 55403 Tel: (612) 332-5681 Fax: (612) 332-6937 Toll-free fax [US only]:
More information