Durability, performance and simplicity of design make Hydra-CelfB pumps the optimum choice for the widest range of pum applications.

Size: px
Start display at page:

Download "Durability, performance and simplicity of design make Hydra-CelfB pumps the optimum choice for the widest range of pum applications."

Transcription

1

2 Durability, performance and simplicity of design make Hydra-CelfB pumps the optimum choice for the widest range of pum applications. When we say "Simply Built to Last", we mean it! Wanner Engineering Hydra-Cell pumps have proven their performance and reliability in many of the toughest industrial equipment and process applications. Our customers are found in virtually every market sector of industry, but they all share the same concern; they all require pumps to keep their plants and equipment running.. Reliablyl Agricultural &lawn care Automatic car washes Chemical processing Food & drug High pressure machine tool coolant Metering and dosing chemical additives Mining Oil production & refining Paper & pulp Parts washing Pressure washing Reverse osmosis Water and wastewater

3 Hydra-Cell positive displacemen-t pumps handle the difficult fluids that destroy other pumps. Hydra-Cell pumps ha die a lot lust dea water! are than Hot fluids Wettable powders Adhesives Reclaim water Fertilizers Soap solutions Corrosive fluids Cutting liuids Salt water Slurries Viscous fluids and many Abrasives Ultrapure fluids more... Liquid gases Chemicals

4 2500 (172) H~dra-Cell 2000 Selection (138) D C'O.c._ ~(103) W a:: ::> ~ 1000 ~ (69) a. t") 500 (34.5) 9 ::E 0-35 o I I I I I I I I I I I I I I I I I o (0) (7.6) (15.2) (22.7) (30.3) (37.9) (45.5) (53. 1) (60.6) (68.2) (75.8) (83.4) (90.1) (98.5) (106. 1) (113.7) (121.3) (128.9) (136.4) FLOW gpm (I/min) F 20 Metallic Heads Non-Metallic Heads F-20: 1000 psi (70 bar); F-21 & F-22: 1500 psi (100 bar) All Models: rpm gpm I/min F-20-X F-20-E F-20-S F-20-8* f20 F-20-G* revs/gal: revs/liter F-20-X F-20-E F-20-S F-20-8* F-20-G* psi (7 bar) 1/2 inch NPT Discharge Port 3/8 inch NPT M-03 ShaH Diameter F-20 5/8 inch hollow shaft; F-21 & F-22: 5/8 inch Oil Capacity Metallic Heads Non-Metatlic Heads: * May require pressurized inlet. Ball bearings 1/8 US quart (0.12 liters) 12 Ibs (5.5 kg) 91bs(41 kg) Metallic Heads Non-Metallic Head s M-03-X 1000 psi (70 bar) M-03-S, E, B, G 1200 psi (83 bar) All models: rpm gpm I/min M-03-X M-03-E M-03-S M-03-B* M-03-G* revs/gal revs/liter M-03-X M-03-E M-03-S M-03-B* M-03-G* Discharge Port Shaft Diameter 1/2 inch NPT 3/8 inch NPT M-03: 5/8 inch hollow shaft 0-03: 7/8 inch M-23: 20 mm hollow shaft Ball bearings 011 Capacity 1 US quart (0.95 liters) Metallic Heads: Non-Metallic Heads 281bs (12.7 kg) 19 Ibs (8.6 kg) Performance specificationsare guidelines only.

5 D 04 D 1S (Horizontal) D 17 (Vertical) 2500 psi (170 bar) 1500 psi ( rpm (0-15-E and 0-17-E only) rpm gpm I/min 2000 psi ( rpm; 0-04-X psi ( rpm 0-04-E Rated Pressure 0-04-S rpm psi (bar) gpm I/min Rated Pressure 0-15/17-X (70) revs/gal (100) psi 1500 psi 2500 psi (140) X (170) E /17-E (70) S (100) revs/i iter (140) bar 100 bar 170 bar (170) X Rated Pressure 0-04-E psi (bar) revs/ga Irevs/liter 0-04-S !17-X 1000 (70) psi (34 bar) 1500 (100) (140) /2 inch NPT (170) Discharge Port 1/2 inch NPT 0-15/17-E 1000 (70) Shaft Diameter 7/8 inch 1500 (100) Ball bearings 2000 (140) Oil Capacity 1.1 U.S. quart (1.05 liters) 2500 (170) Ibs (16.8 kg) 500 psi (34 bar) Discharge Port Shaft Diameter H/4 inch NPT 3/4 inch NPT H/8 inch D l0 (Horizontal) D 12 (Vertical) Taper roller bearings Oil Capacity 2.2 U.S. quart (2.1 liters) Metallic Head: 0-10, 0-12: 1000 psi (70 bar) 145 Ibs(66 kg) Non-Metallic Head 0-10: Performance specifications are guidelines only. rpm gpm I/min /12-X /12-E /12-S / revs/gal revs/liter 0-10/12-X /12-E /12-S / inch NPT Common Specifications: Discharge Port 3/4 inch NPT 0-15/17 Max Temperature Shaft Diameter 7/8 inch Metallic Heads: Tapered roller bearings Consult factory for correct component selection Oil Capacity 1.1 US quart (1.05 liters) for temperatures above 160 F (WC) Non-Metallic Heads: 140 F (60 C) Metallic Heads: 0-10: 481bs (22 kg) Shaft Rotation Bi-directional 0-12: 64 Ibs (29 kg) Non-Metallic Heads: 0-10: 351bs (16 kg)

6 H 25 Metallic: Non-Metallic: rpm H-25-X 1050 H-25-E 1150 H-25-S 1150 H psi (70 bar) revs/gal revs/liter H-25-X H-25-E H-25 -S H Inlet Pori Discharge Port Shaft Diameter Oil Capacity Metallic Heads: Non-Metallic Heads: 1-1/2 inch NPT 1 inch NPT 1-1/8 inch Tapered roller gpm I/min /2 US quarts (2.4 liters) 125 Ibs(56.8 kg) 90 Ibs (40.9 kg) H psi (83 bar) rpm gpm 0-35-X E revs/gal revs/liter 0-35-X E Discharge Pori Shaft Diameter Oil Capacity 2-1/2 inch NPT or 3 inch SAE flange '-1/4 inch NPT or 1-1/4 inch SAE flange 2 inch Tapered roller 5 US quarts (4.7 liters) 240 Ibs (109 kg) I/min Performance specifications are guidelines only. Flexible pump designs to meet your customized needs o High pressures up to 2500 psi o Vertical designs for machine tool and similar pump applications o Complete line of valves, pump/motor adapters, couplings, and other accessories o Welded flanges for petrochemical and other critical installations o Wide selection of pump head, diaphragm and valve materials as well as optional mounting configurations o Slurry duty designs for tough fluids that destroy most other pumps Accessories Accessory products simplify installation, increase performance and tailor pumps to harsh requirements: Pump/motor adapters, baseplates, couplings and guards Oil cooler and filter system Oil level monitor Oil reservoir sig ht bottles Specialty tools Hose connectors ":1'!l"" ~..\... --~.'... :,.~ '.' Modified and ustomiled esigns Pump component modification to handle aparticular fluid, critical performance specification, extreme operating conditions Custom pump head or body castings Matching OEM paint specifications Private labeling ~ -

7 Hydra-Cell pumps for all your applications Clean. Dirty. Hot. High pressure. Low pressure. Caustic. Thick. Gooey. Abrasive. Flammable. Perishable. Wettable Powder... These are just afew of the words our customers use to describe their pumping applications. From liquid butane to drinking water to ceramic slurries, Hydra-Cell pumps handle the full spectrum of industrial and commercial fluids. Flue Gas Emission Control Food Process/In-Plant Cleaning Agricultural Applications Parts Washing Machine Tool Coolant Lawn Care Paper Mill Applications Spray Drying - Abrasives Reverse Osmosis - Separation Car Wash Tote, Tank and Barrel Washing -.. Oil Production and Refining Propellant Packaging

8 Hydro{ell purnps are sold and serviced worldwide by a comprehensive network of factory troined pump distributors. As specialists in pump technologies, these distributor organizations offer you avitallocol resource for technical expertise, product troining, sales and service. Hydra{ell distributors are located in more than thirty countries worldwide. In Norl'h America specifically, over 100 Hydro{ell distributor locations provide local availability for every major industrial marketplace. Contact our home office for the distributor location nearest you. Wanner Engineering, Inc Chestnut Avenue, Minneapolis, MN USA (612) FAX (612) Toll Free FAX (USA only) (800) sales Wannereng.com Website: ArgenHlla Holland Portugal Australia Hong Kong Puerto Rico Austria Iceland Singapore Belgium India South Africa Brozil Indonesia Spain Canada Isroel Sweden China Italy Switzerland Czechoslovakia Japan Taiwan Denmark Korea Thailand Finland Malaysia Turkey Fronce Mexico United Kingdom Germany New Zealand United States Greece Norway Uruguay Venezuela /0/ Wanner International Ltd. Units 8 & 9, Fleet Business Park Sandy Lane Church Crookham, Hampshire GU52 8BF, England Tel +(44) FAX Tel +(44) sales Wannerint.com Printed in USA 11/01/06 3k

WANNER ENGINEERING INC

WANNER ENGINEERING INC Industrial Pumps WANNER ENGINEERING INC Durability, performance and simplicity of design make Hydra-Cell pumps the optimum choice for the widest range of pump applications. When we say Simply Built to

More information

Selection Guide for P Series Pump Accessories & Options

Selection Guide for P Series Pump Accessories & Options Selection Guide for P Series Pump Accessories & Options Contents Page Calibration Cylinders...2 Back Pressure & Pressure Relief Valves...3 Pulsation Dampeners...6 Motors & Controllers...9 Calibration Cylinders

More information

C Series Valves C24 1-1/4 NPT C23 1 NPT C22 3/4 NPT. C22/C23/C24 Series. Stainless Steel Off-Line Brass Off-Line. Brass In-Line.

C Series Valves C24 1-1/4 NPT C23 1 NPT C22 3/4 NPT. C22/C23/C24 Series. Stainless Steel Off-Line Brass Off-Line. Brass In-Line. C Series Valves Accurate, repeatable Minimal pressure surge Smooth, chatter-free bypass Adjustable Easy to service No external springs or moving parts Various seal material Stainless steel or brass bodies

More information

Hydracel High Pressure Pump

Hydracel High Pressure Pump Hydracel High Pressure Pump Mfg: Hydracell Model: D10 SL SE SHEHC Stock No. HDPH038.5a Serial No. 99260 Hydracell High pressure Pump. Model D10 SL SE SHEHC, S/N 99260. Inlet (1) 1-1/2 in., Outlet (1) 1

More information

D/G-10 Series. Up to 8 gpm (30.3 l/min) D/g-10 hydra-cell diaphragm pump. D/G-10 Specialized Designs

D/G-10 Series. Up to 8 gpm (30.3 l/min) D/g-10 hydra-cell diaphragm pump. D/G-10 Specialized Designs D/g-1 hydra-cell diaphragm pump D/G-1 Series Up to 8 gpm (3.3 l/min) D/G-1 Specialized Designs Hydra-Cell Slurry Duty pumps are specifically designed for abrasive slurry applications. See page 8 for complete

More information

D/G-35 Series. Up to 37gpm (140 l/min) D/g-35 hydra-cell diaphragm pump. D/G-35 Specialized Designs

D/G-35 Series. Up to 37gpm (140 l/min) D/g-35 hydra-cell diaphragm pump. D/G-35 Specialized Designs D/g-35 hydra-cell diaphragm pump D/G-35 Series Up to 37gpm (14 l/min) D/G-35 Specialized Designs Hydra-Cell Slurry Duty pumps are specifically designed for abrasive slurry applications. See page 8 for

More information

T100 Series Medium Pressure Models T100K & T100M

T100 Series Medium Pressure Models T100K & T100M T100 Series Medium Pressure Models T100K & T100M Maximum Flow Rate: 45 gpm (170.4 l/min) Maximum Pressure: 3500 psi (241 bar) T100 Series medium pressure model with Nickel Aluminum Bronze pump head Available

More information

H/G-25 Series. Up to 20 gpm (75.7/min) H/g-25 hydra-cell diaphragm pump. H/G-25 Specialized Designs

H/G-25 Series. Up to 20 gpm (75.7/min) H/g-25 hydra-cell diaphragm pump. H/G-25 Specialized Designs H/g-25 hydra-cell diaphragm pump H/G-25 Series Up to 2 gpm (75.7/min) H/G-25 Specialized Designs Hydra-Cell Slurry Duty pumps are specifically designed for abrasive slurry applications. See page 8 for

More information

F/G-20 Series. Up to 1.0 gpm (3.8 l/min) f/g-20 hydra-cell diaphragm pump

F/G-20 Series. Up to 1.0 gpm (3.8 l/min) f/g-20 hydra-cell diaphragm pump f/g-20 hydra-cell diaphragm pump F/G-20 Series Up to 1.0 gpm (3.8 l/min) F/G-22 with Pump/Motor Adapter for coupling to NEMA C-Face and IEC B5 Flange motors F/G-20 hollow shaft for close coupling with

More information

Versatile, Reliable Pumps for a Wide Range of Applications D66 Series

Versatile, Reliable Pumps for a Wide Range of Applications D66 Series Versatile, Reliable Pumps for a Wide Range of Applications D66 Series Pumps the full spectrum of low-to-high viscosity fluids. Features a seal-less design and horizontal disk check valves that enable the

More information

Global Dialysis - Cost per Dialysis Session

Global Dialysis - Cost per Dialysis Session Cost per session for dialysis where a cost has been entered for a dialysis centre. All costs have been converted to US Dollars as at 19 May 2006. Note that the costs do not state what is covered by a dialysis

More information

Versatile, Reliable Pumps for a Wide Range of Applications H25 Series

Versatile, Reliable Pumps for a Wide Range of Applications H25 Series Versatile, Reliable Pumps for a Wide Range of Applications H25 Series Pumps the full spectrum of low-to-high viscosity fluids. Features a seal-less design and horizontal disk check valves that enable the

More information

Versatile, Reliable Pumps for a Wide Range of Applications D10 Series

Versatile, Reliable Pumps for a Wide Range of Applications D10 Series Versatile, Reliable Pumps for a Wide Range of Applications D10 Series Pumps the full spectrum of low-to-high viscosity fluids. Features a seal-less design and horizontal disk check valves that enable the

More information

Infographics on Electromobility (January 2019)

Infographics on Electromobility (January 2019) Infographics on Electromobility (January 2019) Publisher: BMW Group Corporate Communications Electromobility Last Update: 04.01.2019 Contact: presse@bmw.de ELECTROMOBILITY IN GERMANY. SHARE IN NEW REGISTRATIONS

More information

Versatile, Reliable Pumps for a Wide Range of Applications M03 Mono-Block Series

Versatile, Reliable Pumps for a Wide Range of Applications M03 Mono-Block Series Versatile, Reliable Pumps for a Wide Range of Applications M03 Mono-Block Series Pumps the full spectrum of low-to-high viscosity fluids. Features a seal-less design and horizontal disk check valves that

More information

Versatile, Reliable Pumps for a Wide Range of Applications D35 Series

Versatile, Reliable Pumps for a Wide Range of Applications D35 Series Versatile, Reliable Pumps for a Wide Range of Applications D35 Series Pumps the full spectrum of low-to-high viscosity fluids. Features a seal-less design and horizontal disk check valves that enable the

More information

Lifting Instructions for 1336 PLUS and FORCE D Frame Drives

Lifting Instructions for 1336 PLUS and FORCE D Frame Drives Installation Instructions Lifting Instructions for 1336 PLUS and FORCE D Frame Drives This publication will guide you through the steps needed to properly lift and mount the following drives: 1336 PLUS

More information

H/G-25 Series. Up to 20 gpm (75.7/min) H/G-25 Specialized Designs

H/G-25 Series. Up to 20 gpm (75.7/min) H/G-25 Specialized Designs H/G-25 Series Up to 2 gpm (75.7/min) H/G-25 Specialized Designs Hydra-Cell Slurry Duty pumps are specifically designed for abrasive slurry applications. See page 8 for complete specifications. The H-25

More information

Total credit to the non-financial sector (core debt), % of GDP Table F1.1

Total credit to the non-financial sector (core debt), % of GDP Table F1.1 Total credit to the non-financial sector (core debt), % of GDP Table F1.1 2012 2013 2014 2015 2016 Q2 16 Q3 16 Q4 16 Q1 17 Q2 17 Argentina 62.6 66.4 64.6 75.5 75.3 81.7 80.1 75.3 71.6 72.7 Australia 208.0

More information

T100 Series High Pressure

T100 Series High Pressure T100 Series High Pressure Maximum Flow Rate: 26 gpm (98.4 l/min) Maximum Pressure: T100 Series high pressure model with Nickel Aluminum Bronze pump head Available to Meet API 674! Seal-less design eliminates

More information

D/G-12 Series. Up to 8 gpm (30.3 l/min)

D/G-12 Series. Up to 8 gpm (30.3 l/min) D/G-12 Series Up to 8 gpm (3.3 l/min) D/G-12 Vertical Applications The D/G-12 is specifically designed for vertical pumping installations such as machine tool cooling applications. D/G-12 shown with Hydra-Cell

More information

FEDERAL RESERVE statistical release

FEDERAL RESERVE statistical release FEDERAL RESERVE statistical release FOR IMMEDIATE RELEASE MARCH 16, 1992 E.U C1Z1, GEOGRAPHICAL r DISTRIBUTION n OF e ASSETS AND^LIABILITIES (IN MILLIONS OF DOLLARS) ASSETS COUNTRY OF CUSTOMER 12/31/90

More information

SD Series. Slurry Duty Pumps. Hydra-Cell Slurry Duty pumps are specifically designed for abrasive duty applications in order to:

SD Series. Slurry Duty Pumps. Hydra-Cell Slurry Duty pumps are specifically designed for abrasive duty applications in order to: SD Series Slurry Duty Pumps Hydra-Cell Slurry Duty pumps are specifically designed for abrasive duty applications in order to: Increase flow Reduce and simplify maintenance Extend pump life Provide quiet

More information

D/G-04 Series. Up to 3.0 gpm (11.3 l/min)

D/G-04 Series. Up to 3.0 gpm (11.3 l/min) D/G-4 Series Up to 3. gpm (11.3 l/min) 42 United States Instant Information: United Kingdom D/G-4 Series Performance flow max max flow input model gpm l/min rpm D/G-4-X 2.9 11. 175 D/G-4-E 2.1 7.8 175

More information

Versatile, Reliable Pumps for a Wide Range of Applications M03 Series

Versatile, Reliable Pumps for a Wide Range of Applications M03 Series Versatile, Reliable Pumps for a Wide Range of Applications M03 Series Pumps the full spectrum of low-to-high viscosity fluids. Features a seal-less design and horizontal disk check valves that enable the

More information

Condensed Catalog. Seal-less Pumps

Condensed Catalog. Seal-less Pumps Condensed Catalog Seal-less Pumps Hydra-Cell F/M/D/H Series Seal-less Pumps Hydra-Cell T and Q Series Pumps Hydra-Cell P Series Seal-less Metering Pumps Due to the Wanner Engineering Continuous Improvement

More information

Versatile, Reliable Pumps for a Wide Range of Applications M03 Series

Versatile, Reliable Pumps for a Wide Range of Applications M03 Series Versatile, Reliable Pumps for a Wide Range of Applications M03 Series Pumps the full spectrum of low-to-high viscosity fluids. Features a seal-less design and horizontal disk check valves that enable the

More information

SD Series. Slurry Duty Pumps. sd - Slurry duty hydra-cell diaphragm pump

SD Series. Slurry Duty Pumps. sd - Slurry duty hydra-cell diaphragm pump sd - Slurry duty hydra-cell diaphragm pump SD Series Slurry Duty Pumps Hydra-Cell Slurry Duty pumps are specifically designed for abrasive duty applications in order to: Increase flow Reduce and simplify

More information

I. Global wine markets,

I. Global wine markets, I. Global wine markets, 2007-09 Table 1: Summary of the world's wine markets, 2007-09 (annual average) Vine % of cropland Wine Wine Wine Wine Wine Per adult wine Pop- GDP GDP Area under vines produced

More information

BP Statistical Review of World Energy June 2017

BP Statistical Review of World Energy June 2017 BP Statistical Review of World Energy June 217 Primary energy 8 Consumption 8 Consumption by fuel 9 66 th edition Primary energy Consumption* Growth rate per annum Million tonnes oil equivalent 26 27 28

More information

Information Technology and Economic Development: An Introduction to the Research Issues

Information Technology and Economic Development: An Introduction to the Research Issues November 1998 Working Papers No. 153 Information Technology and Economic Development: An Introduction to the Research Issues TABLE 1 WORLD-WIDE INFORMATION TECHNOLOGY MARKET BREAKDOWN, 1995

More information

Electronic Precision Metering. Built to exceed API 675 performance standards with pulse-free linear flow

Electronic Precision Metering. Built to exceed API 675 performance standards with pulse-free linear flow Electronic Precision Metering Built to exceed API 675 performance standards with pulse-free linear flow Contents Page(s) Introduction....................................... 3 Markets Served.....................................

More information

Pulsation Dampeners NEW! Wanner Engineering Inc

Pulsation Dampeners NEW! Wanner Engineering Inc Pulsation Dampeners NEW! Wanner Engineering Inc Pulsation Dampeners Positive Displacement (PD) pumps create pulsation and hydraulic shock due to the reciprocating nature of their stroking action, potentially

More information

AUSTRIA. Table 1. FDI flows in the host economy, by geographical origin. (Millions of US dollars)

AUSTRIA. Table 1. FDI flows in the host economy, by geographical origin. (Millions of US dollars) Table 1. FDI flows in the host economy, by geographical origin World 5 690 138 6 195 3 184 10 784 7 933 31 154 6 858 9 303 840 10 618 5 760 Developed economies 5 740 13 5 341 2 689 10 137 6 291 29 721

More information

Primary energy. 8 Consumption 9 Consumption by fuel. 67 th edition

Primary energy. 8 Consumption 9 Consumption by fuel. 67 th edition Primary energy 8 Consumption 9 Consumption by fuel 67 th edition Primary energy Consumption* Growth rate per annum Million tonnes oil equivalent 27 28 29 2 211 212 213 214 215 216 217 217 26-16 Share 217

More information

Spain s exports by oil product group and country of destination

Spain s exports by oil product group and country of destination Corporación de Reservas Estratégicas de Productos Petrolíferos Castellana, 79 28046 Madrid T. +34 91 360 09 10 Updated F. +34 91 420 on39 45 www.cores.es February 13 th 2017 Spain s exports by oil product

More information

Thermal Coal Market Presentation to UNECE Ad Hoc Group of Experts on Coal in Sustainable Development December 7, 2004

Thermal Coal Market Presentation to UNECE Ad Hoc Group of Experts on Coal in Sustainable Development December 7, 2004 Thermal Coal Market Presentation to UNECE Ad Hoc Group of Experts on Coal in Sustainable Development December 7, 2004 Barlow Jonker Pty Ltd Commercial in Confidence 1 Presentation Outline 1. Barlow Jonker

More information

Rectangular photoelectric proximity switches

Rectangular photoelectric proximity switches Rectangular photoelectric proximity switches Features Diffuse sensors with operating distance of 300 mm or 800 mm Through-beam sensors with operating distance of 15 or 50 m Reflex sensors with operating

More information

WORLD MOTOR VEHICLE PRODUCTION BY COUNTRY AND TYPE QUARTERS June 14, 2018

WORLD MOTOR VEHICLE PRODUCTION BY COUNTRY AND TYPE QUARTERS June 14, 2018 QUARTERS 2017-2018 June 14, 2018 CONTENTS BASEPROTOTAL BASEPROCARS BASEPROLCV BASEPROHCV BASEPROBC Summation of cars, LCVs, HCVs, heavy buses Cars LCVs HCVs Heavy buses Note: The production of cars and

More information

Better sealing solutions for reciprocating compressors

Better sealing solutions for reciprocating compressors Better sealing solutions for reciprocating compressors Experience and know-how the basis for innovation Rings and packings are critical components for the service life of reciprocating compressors. Therefore

More information

Extraction arms for every type of application

Extraction arms for every type of application 1 Extraction arms for every type of application 2 Improved workspaces within arm s reach A workspace free from dust, hazardous particles, fumes and exhaust is good in many ways. It improves the working

More information

NI PS-15/16/17 Side Mount Brackets

NI PS-15/16/17 Side Mount Brackets INSTALLATION GUIDE NI PS-15/16/17 Side Mount Brackets This document provides the installation procedure for the NI PS-15/16/17 Side Mount Brackets. This accessory is used to mount NI PS-15/16/17 power

More information

Imports of seed for sowing by country Calendar year 2011 Source: ISF compilation based on official statistics and international seed trade reports

Imports of seed for sowing by country Calendar year 2011 Source: ISF compilation based on official statistics and international seed trade reports USA 157,432 15,562 464 173,458 523 318 67 908 Germany 195,159 5,913 520 201,592 595 97 22 714 France 125,701 4,389 277 130,367 522 150 11 683 Netherlands 140,899 12,253 796 153,948 250 330 48 628 Italy

More information

G20 Series. 24 bar (350 psi) for Non-metallic Pump Heads. G20 Close-coupled with Brass pump head ATEX. G20 Version 5 10/16

G20 Series. 24 bar (350 psi) for Non-metallic Pump Heads. G20 Close-coupled with Brass pump head ATEX. G20 Version 5 10/16 G20 Series Maximum Flow Rate: Maximum Pressure: 3.8 l/min (1.0 gpm) 103 bar (1500 psi) for Metallic Pump Heads 24 bar (350 psi) for Non-metallic Pump Heads ATEX G20 Close-coupled with Brass pump head G21

More information

Global Valuation Summary - SAMPLE PAGES

Global Valuation Summary - SAMPLE PAGES - SAMPLE PAGES Regional Valuation Comparisons... 2... 4... 7... 9... 11 Developed Asia Pacific ex... 13 Developed Europe ex... 16 Advanced Emerging... 19 Appendix... 22 Disclaimer... 23 Global Market Valuations

More information

Made UNDER high pressure

Made UNDER high pressure Made UNDER high pressure Made FOR high pressure THE CONTRINEX HIGH-PRESSURE-RESISTANT INDUCTIVE SENSOR SERIES Contrinex is a leading international high-tech sensor company with headquarters in Switzerland.

More information

G15 Series API bar (2500 psi) for Metallic Pump Heads. G15 for horizontal installations shown with Stainless Steel pump head.

G15 Series API bar (2500 psi) for Metallic Pump Heads. G15 for horizontal installations shown with Stainless Steel pump head. G15 Series Maximum Flow Rate: Maximum Pressure: 58.7 l/min (15.5 gpm) 172 bar (2500 psi) for Metallic Pump Heads API 674 ATEX G15 for horizontal installations shown with Stainless Steel pump head. G15

More information

69 bar (1000 psi) for Metallic Pump Heads 24 bar (350 psi) for Non-metallic Pump Heads

69 bar (1000 psi) for Metallic Pump Heads 24 bar (350 psi) for Non-metallic Pump Heads G25 Series Maximum Flow Rate: Maximum Pressure: 76 l/min (20.0 gpm) 69 bar (1000 psi) for Metallic Pump Heads 24 bar (350 psi) for Non-metallic Pump Heads API 674 ATEX G25 with Cast Iron pump head G25

More information

Packing Data Installation Instructions

Packing Data Installation Instructions Packing Data PK Installation Instructions This document describes how to install a Dataliner DL10 display in a panel or enclosure and connect power. European Union Directive Compliance wiring and safety

More information

PLASTIC WELDING. New! TRIAC AT. Intelligent and robust.

PLASTIC WELDING. New! TRIAC AT. Intelligent and robust. PLASTIC WELDING TRIAC AT New! Intelligent and robust. Hot air tool TRIAC AT The new TRIAC AT is an intelligent yet robust hot air tool for welding and shrinking plastic. It is designed for the needs of

More information

CSM-K. high capacity clean steam generator

CSM-K. high capacity clean steam generator CSM-K high capacity clean steam generator High capacity clean steam generator Spirax Sarco, the world s leading steam system specialist, has combined modern technology with package design expertise to

More information

G10 Series API bar (350 psi) for Non-metallic Pump Heads. G10 with Cast Iron pump head

G10 Series API bar (350 psi) for Non-metallic Pump Heads. G10 with Cast Iron pump head G10 Series Maximum Flow Rate: Maximum Pressure: 33.4 l/min (8.8 gpm) 103 bar (1500 psi) for Metallic Pump Heads 24 bar (350 psi) for Non-metallic Pump Heads API 674 ATEX G10 with Cast Iron pump head G10

More information

G25 Series API bar (350 psi) for Non-metallic Pump Heads. G25 with Cast Iron pump head

G25 Series API bar (350 psi) for Non-metallic Pump Heads. G25 with Cast Iron pump head G25 Series Maximum Flow Rate: Maximum Pressure: 76 l/min (20.0 gpm) 69 bar (1000 psi) for Metallic Pump Heads 24 bar (350 psi) for Non-metallic Pump Heads API 674 ATEX G25 with Cast Iron pump head G25

More information

Universal Charging and Testing Unit FPU-1 for Bladder, Piston and Diaphragm Accumulators

Universal Charging and Testing Unit FPU-1 for Bladder, Piston and Diaphragm Accumulators Universal Charging and Testing Unit FPU-1 for Bladder, Piston and Diaphragm Accumulators 1. Description 1.1. Function The HYDAC charging and testing unit FPU-1 is used to charge accumulators with nitrogen

More information

Valve Accessories NEW! Wanner Engineering Inc

Valve Accessories NEW! Wanner Engineering Inc Valve Accessories NEW! Wanner Engineering Inc Back Pressure Valves Diaphragm Back Pressure Valves enhance the performance of precision metering systems by applying a continuous back pressure to the EPM

More information

MT8 Pump. Triplex Metering Pump with Pulse-Free Linear Flow

MT8 Pump. Triplex Metering Pump with Pulse-Free Linear Flow Maximum Flow Rate: Minimum Flow Rate: Maximum Pressure: 8.00 gph (30.28 lph) 0.06 gph (0.227 lph) 3500 psi (241 bar) MT8 with Stainless Steel pump head Hydra-Cell Metering Solutions pumps exceed API 675

More information

SFC-FID ASTM System. SFC-4000 Series SFC. Performance Innovation Reliability

SFC-FID ASTM System. SFC-4000 Series SFC. Performance Innovation Reliability SFC-FID ASTM System SFC-4000 Series SFC Performance Innovation Reliability The JASCO SFC-FID system has been developed as a simple and validated turn-key solution for the measurement of the two ASTM standard

More information

G03 Series. 24 bar (350 psi) for Non-metallic Pump Heads. G03 Shaft-driven with Stainless Steel pump head

G03 Series. 24 bar (350 psi) for Non-metallic Pump Heads. G03 Shaft-driven with Stainless Steel pump head G03 Series Maximum Flow Rate: Maximum Pressure: 11.7 l/min (3.1 gpm) 103 bar (1500 psi) for Metallic Pump Heads 24 bar (350 psi) for Non-metallic Pump Heads ATEX G03 Shaft-driven with Stainless Steel pump

More information

The SHK manual chain hoist

The SHK manual chain hoist 07. 2014 The SHK manual chain hoist The SHK and SHK+ manual chain hoist The SHK manual chain hoist features a wide spectrum of applications, independent of a power supply. The robust, compact construction

More information

G03 Mono-Block Series

G03 Mono-Block Series G03 Mono-Block Series Maximum Flow Rate: 11.7 l/min (3.1 gpm) Maximum Pressure: 103 bar (1500 psi) for Metallic Pump Heads ATEX Mono-Block (G03) Shaft-driven with Stainless Steel pump head Mono-Block (G03)

More information

Allen-Bradley 1397 Pulse Encoder Interface Card

Allen-Bradley 1397 Pulse Encoder Interface Card Installation Instructions IN Allen-Bradley 1397 Pulse Encoder Interface Card Cat. No. 1397-PE Table of Contents What This Option Provides........................ 1 Where This Option Is Used........................

More information

G66 Series API bar (250 psi) for Non-metallic Pump Heads. G66 with Ductile Iron pump head. G66 with Polypropylene pump head.

G66 Series API bar (250 psi) for Non-metallic Pump Heads. G66 with Ductile Iron pump head. G66 with Polypropylene pump head. G66 Series Maximum Flow Rate: Maximum Pressure: 248.7 l/min (65.7 gpm) 48 bar (7 psi) for Metallic Pump Heads 17 bar (25 psi) for Non-metallic Pump Heads API 674 ATEX G66 with Ductile Iron pump head www.hydra-cell.eu

More information

G35 Series API bar (1500 psi) for Metallic Pump Heads. G35 with Stainless Steel pump head and SAE flanges. G35 with Brass pump head

G35 Series API bar (1500 psi) for Metallic Pump Heads. G35 with Stainless Steel pump head and SAE flanges. G35 with Brass pump head G35 Series Maximum Flow Rate: Maximum Pressure: 138 l/min (36.5 gpm) 103 bar (1500 psi) for Metallic Pump Heads API 674 ATEX G35 with Stainless Steel pump head and SAE flanges G35 with Cast Iron pump head

More information

Product Overview INCH

Product Overview INCH INCH Product Overview CERTIFIED Technology Made in Italy Since 1955 the Varvel Group has been making gearboxes and variators for light industry applications. Reliable partner in power transmission equipment

More information

G10 Series API bar (350 psi) for Non-metallic Pump Heads. G10 with Cast Iron pump head

G10 Series API bar (350 psi) for Non-metallic Pump Heads. G10 with Cast Iron pump head G10 Series Maximum Flow Rate: Maximum Pressure: 33.4 l/min (8.8 gpm) 103 bar (1500 psi) for Metallic Pump Heads 24 bar (350 psi) for Non-metallic Pump Heads API 674 ATEX G10 with Cast Iron pump head G10

More information

Mineral Industry. Drive solutions for reclaimers, stackers, bulk conveyors applications

Mineral Industry. Drive solutions for reclaimers, stackers, bulk conveyors applications Mineral Industry Drive solutions for reclaimers, stackers, bulk conveyors applications A world specialist in drive systems World leader in the design and production of alternators and motors, Leroy-Somer,

More information

103 bar (1500 psi) for Metallic Pump Heads

103 bar (1500 psi) for Metallic Pump Heads G35 Series Maximum Flow Rate: Maximum Pressure: 138 l/min (36.5 gpm) 13 bar (15 psi) for Metallic Pump Heads API 674 ATEX G35 with Stainless Steel pump head and SAE flanges G35 with Brass pump head G35

More information

67 th edition. Renewable energy. Appendices. 44 Other renewables consumption 45 Biofuels production

67 th edition. Renewable energy. Appendices. 44 Other renewables consumption 45 Biofuels production Renewable energy 44 Other renewables consumption 45 Biofuels production Appendices A1 Solar Generation A2 Wind Generation A3 Geothermal, biomass and other Generation A4 Geothermal Cumulative installed

More information

1. INTERNATIONAL OVERVIEW. 1.0 Area and population. population (1,000) area

1. INTERNATIONAL OVERVIEW. 1.0 Area and population. population (1,000) area 1.0 Area and population area population (1,000) km 2 2000 2010 2018 1 inhabitants per km 2 Belgium 30,530 10,251 10,920 11,443 375 Germany 357,380 82,212 81,777 82,952 232 Estonia 45,230 1,397 1,331 1,315

More information

Performance Derby: MSCI Regions/Countries Earnings & Revenues Growth 2019E / 2018E / 2017A

Performance Derby: MSCI Regions/Countries Earnings & Revenues Growth 2019E / 2018E / 2017A Performance Derby: MSCI Regions/Countries Earnings & Revenues Growth 2019E / 2018E / 2017A February 28, 2018 Dr. Ed Yardeni 516-972-7683 eyardeni@yardeni.com Joe Abbott 732-497-5306 jabbott@yardeni.com

More information

AlixPartners Automotive Electrification Index. Second Quarter 2017

AlixPartners Automotive Electrification Index. Second Quarter 2017 AlixPartners Automotive Electrification Index Second Quarter 217 AlixPartners Automotive Electrification Index e-range E-RANGE = Sum of electric range of all electric vehicles (EV) sold By automaker, segment,

More information

The radial piston power. COMPANY PROFILE, PRODUCT RANGE & APPLICATIONS CUSTOMIZED SOLUTIONS FOR EVERY REQUIREMENT

The radial piston power.   COMPANY PROFILE, PRODUCT RANGE & APPLICATIONS CUSTOMIZED SOLUTIONS FOR EVERY REQUIREMENT The radial piston power www.italgroup.eu CUSTOMIZED SOLUTIONS FOR EVERY REQUIREMENT COMPANY PROFILE, PRODUCT RANGE & APPLICATIONS Producers and worldwide distributors of radial piston hydraulic motors,

More information

Annex IV. True nationality of the 20 largest fleets by flag of registration, as at 1 January 2011 a

Annex IV. True nationality of the 20 largest fleets by flag of registration, as at 1 January 2011 a 194 Annex IV. True nationality of the 20 largest fleets by flag of registration, as at 1 January 2011 a Antigua and Barbuda Bahamas China Belgium 0 0-9 122 0.2 1 59 0.1 Bermuda 0 0-17 1 907 2.8 0 0 - Brazil

More information

Universal Charging and Testing Unit FPU-1 for Bladder, Piston and Diaphragm Accumulators

Universal Charging and Testing Unit FPU-1 for Bladder, Piston and Diaphragm Accumulators Universal Charging and Testing Unit FPU-1 for Bladder, Piston and Diaphragm Accumulators 1. DESCRIPTION 1.1. FUNCTION The HYDAC charging and testing unit FPU-1 is used to charge accumulators with nitrogen

More information

INITIATING AND FUNDING R&D. IGRC 2014 Copenhagen September Brad Douville, Vice-President, Westport

INITIATING AND FUNDING R&D. IGRC 2014 Copenhagen September Brad Douville, Vice-President, Westport INITIATING AND FUNDING R&D IGRC 2014 Copenhagen September 17-19 Brad Douville, Vice-President, Westport 1 Driving a Shift to Natural Gas as a Transportation Fuel» Energy transitions are enormously difficult»

More information

The new STx chain hoist NEW. Sophisticated technology prepared for the future

The new STx chain hoist NEW. Sophisticated technology prepared for the future The new STx chain hoist 03.2018 NEW Sophisticated technology prepared for the future The new STx chain hoist Sophisticated technology prepared for the future Our experts have undertaken to keep reviewing

More information

Charging and testing unit FPU for Bladder, Piston and Diaphragm Accumulators

Charging and testing unit FPU for Bladder, Piston and Diaphragm Accumulators Charging and testing unit FPU for Bladder, Piston and Diaphragm Accumulators 1. DESCRIPTION 1.1. FUNCTION The HYDAC charging and testing unit FPU is used to charge accumulators with nitrogen or to check

More information

I. World trade in Overview

I. World trade in Overview I. World trade in - Overview Table I.1 Growth in the volume of world merchandise exports and production, 2-5 (Annual percentage change) 2-5 23 24 World merchandise exports 4.5 5. 9.5 6. Agricultural products

More information

PLASTIC WELDING. New! TRIAC AT. Intelligent and robust.

PLASTIC WELDING. New! TRIAC AT. Intelligent and robust. PLASTIC WELDING TRIAC AT New! Intelligent and roust. TRIAC AT features Suitale for the work site Closed loop controlled temperature Open loop controlled air volume Intelligent «e-drive» operating unit

More information

Table 5 Production, trade and supply of hard coal Thousand metric tons and kilograms per capita

Table 5 Production, trade and supply of hard coal Thousand metric tons and kilograms per capita Table Notes Production includes production from other sources as defined in the previous table. Data for China include brown coal. Please refer to the Definitions Section on pages ix to xv for the appropriate

More information

Table 5 Production, trade and supply of hard coal Thousand metric tons and kilograms per capita

Table 5 Production, trade and supply of hard coal Thousand metric tons and kilograms per capita Table Notes Production includes production from other sources as defined in the previous table. Data for China include brown coal. Please refer to the Definitions Section on pages ix to xv for the appropriate

More information

Global Medium & Heavy Commercial Vehicle Model Level Production Forecast Report. From 2001 to 2021

Global Medium & Heavy Commercial Vehicle Model Level Production Forecast Report. From 2001 to 2021 Global Medium & Heavy Commercial Vehicle Model Level Production Forecast Report From 2001 to 2021 Global CV Markets Covered Industry Production Data Truck & Bus Model Production Forecast Engine Production

More information

T100 Series Medium Pressure Models T100K & T100M

T100 Series Medium Pressure Models T100K & T100M T100 Series Medium Pressure Models T100K & T100M Maximum Flow Rate: Maximum Pressure: 45 gpm (170.4 l/min) 1543 BPD 3500 psi (241 bar) T100 Series medium-pressure model with Nickel Aluminum Bronze pump

More information

Coal. 36 Reserves and prices 38 Production and consumption. 67 th edition

Coal. 36 Reserves and prices 38 Production and consumption. 67 th edition Coal 36 Reserves and prices 38 Production and consumption 67 th edition Total proved reserves at end 217 Million tonnes Anthracite and bituminous Subbituminous and lignite US 228 3116 25916 24.2% 357 Canada

More information

G04 Series. Maximum Flow Rate: 11.2 l/min (2.9 gpm) Maximum Pressure: 200 bar (2900 psi) for Metallic Pump Heads. G04 with Stainless Steel pump head

G04 Series. Maximum Flow Rate: 11.2 l/min (2.9 gpm) Maximum Pressure: 200 bar (2900 psi) for Metallic Pump Heads. G04 with Stainless Steel pump head G04 Series Maximum Flow Rate: 11.2 l/min (2.9 gpm) Maximum Pressure: 200 bar (2900 psi) for Metallic Pump Heads ATEX G04 with Stainless Steel pump head G04 with Brass pump head G04 with Stainless Steel

More information

EVOline Socket Modules

EVOline Socket Modules 203 Protection types in sockets. Colour table Standard-colours To order other colours in RAL-Tones, please contact us. With contact protection Contact protection: Contact socket with child protection (increased

More information

D6.. Butterfly valves. For controlled operation.

D6.. Butterfly valves. For controlled operation. D6.. Butterfly valves. For controlled operation. Water is our element. www.belimo.eu Total solutions for medium and large volumetric flows. Butterfly valves from Belimo are available as classical D6..N

More information

INDUSTRIAL PUMPS MODEL: D-35-SD PARTS MANUAL SLURRY DUTY PUMP WANNER ENGINEERING, INC. IMPORTANT

INDUSTRIAL PUMPS MODEL: D-35-SD PARTS MANUAL SLURRY DUTY PUMP WANNER ENGINEERING, INC. IMPORTANT PARTS MANUAL INDUSTRIAL PUMPS IMPORTANT Record your pump model number and serial number here for easy reference: Model No. MODEL: D-35-SD SLURRY DUTY PUMP Serial No. Date of Purchase When ordering parts

More information

Portable Extractor Products 1XP Series Pumps

Portable Extractor Products 1XP Series Pumps Portable Extractor Products 1XP Series Pumps Product Quality, Reliability and Support You Expect www.catpumps.com Decrease Downtime and Increase Profits with Cat Pumps Quality that keeps your equipment

More information

Fork through-beam sensors

Fork through-beam sensors Fork throughbeam sensors Features Wide range of sizes: fork widths from 2 to 220 mm Metal housings Integrated evaluation unit Connection by means of S8 connector Degree of protection Adjustable sensitivity

More information

FORGED STAINLESS STEEL Rack And Pinion Actuator S Series

FORGED STAINLESS STEEL Rack And Pinion Actuator S Series FORGED STAINLESS STEEL Rack And Pinion Actuator S Series The Air Torque S Series stainless steel actuators are a corrosion resistant rack and pinion actuator particularly engineered for corrosive environments

More information

Spain s exports by oil product group and country of destination. Year Corporación de Reservas Estratégicas de Productos Petrolíferos

Spain s exports by oil product group and country of destination. Year Corporación de Reservas Estratégicas de Productos Petrolíferos Corporación de Reservas Estratégicas de Productos Petrolíferos Castellana, 79 28046 Madrid T. +34 91 360 09 10 Updated F. +34 91 420 on39 45 www.cores.es July 13 th 2015 Spain s exports by oil product

More information

Production (bbl/day)

Production (bbl/day) 1 of 5 14/09/2011 22:15 From Wikipedia, the free encyclopedia This is a list of countries by oil production mostly based on CIA World Factbook data. [1] Note that oil production refers to the sum of barrels

More information

Fork through-beam sensors

Fork through-beam sensors Fork throughbeam sensors Features Wide range of sizes: fork widths from 2 to 220 mm Metal housings Integrated evaluation unit Connection by means of S8 connector Degree of protection Adjustable sensitivity

More information

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK Accredited to ISO/IEC 17021-1:2015 to provide environmental 4th Floor Vivo Building 30 Stamford Street SE1 9LQ United Kingdom Contact: Mr

More information

Global Threat Reduction Initiative Foreign Research Reactor Spent Nuclear Fuel Shipments

Global Threat Reduction Initiative Foreign Research Reactor Spent Nuclear Fuel Shipments FY1996 1. Sept. 22, 1996 280 assemblies in 8 casks to SRS [First East Coast Shipment] FY 1997 Sweden 64 Switzerland 42 Germany 125 Chile 28 Columbia 21 2. Dec. 15, 1996 41 spent fuel assemblies in one

More information

UAE draft regulation for Electric Vehicle

UAE draft regulation for Electric Vehicle UAE draft regulation for Electric Vehicle Emirates Authority for Standardization and Metrology Eng. Khaled Ali Abdullmajeed Contents - Introduction of ESMA. - Introduction of EV Regulation in UAE - The

More information

Potential Danger of Fire or Explosion Read this letter now!

Potential Danger of Fire or Explosion Read this letter now! Elster GmbH Postfach 28 09 49018 Osnabrück Strotheweg 1 49504 Lotte (Büren) Deutschland Tel. +49 541 1214-0 Fax +49 541 1214-370 hts.lotte@honeywell.com ThermalSolutions.honeywell.com Potential Danger

More information

The SHK manual chain hoist

The SHK manual chain hoist 0.206 The SHK manual chain hoist The SHK and SHK+ manual chain hoist The SHK manual chain hoist features a wide spectrum of applications, independent of a power supply. The robust, compact construction

More information

T100 Series Low Pressure Models T100E, T100F & T100H

T100 Series Low Pressure Models T100E, T100F & T100H T100 Series Low Pressure Models T100E, T100F & T100H Maximum Flow Rate: Maximum Pressure: 96 gpm (366.1 l/min) 3292 BPD 2100 psi (145 bar) T100 Series low-pressure model with Nickel Aluminum Bronze (NAB)

More information