AIR OPERATED DOUBLE DIAPHRAGM PUMP

Size: px
Start display at page:

Download "AIR OPERATED DOUBLE DIAPHRAGM PUMP"

Transcription

1 DF5 Metallic pumps 3 For fluid transfer and distribution systems. 5 l/min, 14 US gpm 1/2 fluid port. Very robust construction, the pump is fully enclosed in an aluminum shield. Lubricants, waste oil, antifreeze, water. Aluminum NBR Hytrel Lubricants, waste oil, antifreeze, water, windshield wash, brake fluid. Nickel coated aluminum Acetal Hytrel US gpm (5 l/min).26 US gallons (.1 litres) 45 to 1 psi (3 to 7 bar) Max dry suction head (1) 2 (6 m) Max wet suction head (1) 26 (8 m) 3/8 NPSM (F) (1) Data measured with water, air inlet pressure 7 bar, 2 ºC (156) 6.3 (16) 6.57 (167) 4.13 (15) 4.8 (122).31 (8) G H I J K L 5.75 (146) 5.51 (14) 2.76 (7) 5.9 (15) 18

2 Directflo mixing pumps 3 DF5 MIXING PUMPS Metallic and non-metallic pumps for 1:1 mixing of fluids (water/antifreeze, water/windshield washer fluid). 5% proportioning of each fluid is fixed and can not be changed. Very robust construction, the pump is fully enclosed in a shield and has corrosion proof wetted materials. 5 l/min - 14 US gpm; 2 x 3/8 fluid inlet and 1/2 fluid outlet ports. 1:1 solutions of water/antifreeze, windshield wash/water. Nickel coated aluminium Acetal Hytrel :1 solutions of water/antifreeze, windshield wash/water. Acetal Acetal Hytrel US gpm (5 l/min).26 US gallons (.1 litres) 45 to 1 psi (3 to 7 bar) Max dry suction head (1) 2 (6 m) Max wet suction head (1) 26 8 m (26 ) 2 x 3/8 NPSM (F) and flange 1/2 NPSM and flange 3/8 NPSM (1) Data measured with water, air inlet pressure 7 bar, 2 ºC (156) 6.3 (16) 6.57 (167) 4.13 (15) 4.8 (122).31 (8) G H I J K L M 5.75 (146) 5.51 (14) 2.76 (7).944 (24) 5.9 (15) 3/8 Pump capacity curve same as DF5 metallic (PN ) and non metallic (PN ) pumps 19

3 DF5 NON Metallic pumps 3 For fluid transfer and distribution systems. Very robust construction. The pump is fully enclosed in a shield and has non-metallic wetted parts. Lubricants, waste oil, antifreeze, transmission fluid, windshield wash, solvents, biodiesel Acetal Acetal Hytrel Lubricants, waste oil, antifreeze, transmission fluid, windshield wash, detergents Polypropylene Polypropylene Hytrel US gpm (5 l/min).26 US gallons (.1 litres) 45 to 1 psi (3 to 7 bar) Max dry suction head (1) 2 (6 m) Max wet suction head (1) 26 (8 m) 3/8 NPSM (F) (1) Data measured with water, air inlet pressure 7 bar, 2 ºC (156) 6.3 (16) 6.57 (167) 4.13 (15) 4.8 (122).31 (8) G H I K 5.75 (146) 5.51 (14) 2.76 (7) 5.9 (15) 2

4 I AIR OPERATED DOUBLE DF1 Metallic pumps 3 For fluid transfer, evacuation and distribution systems gallon -28 US gpm 1" fluid port. Very robust construction, the pump is fully enclosed in an aluminum shield. APPLICATION WETTED MATERIAL CHECK BALLS DIAPHRAgMS PART N.º Lubricants, waste oil, antifreeze, transmission fluid, water Aluminium Hytrel Hytrel Pressure Ratio 1:1 TECHNICAL DATA Maximum free delivery 28 US gpm (1 l/min) Delivery per stroke.9 US gallons (.35 l) 45 to 1 psi (3 to 7 bar) 3/16" (4 mm) Max dry suction head 15' (4.5 m) Max wet suction head 23' (7 m) 19.3 lb (7.2 Kg) 1" NPSM and flange 1" NPSM and flange 3/8" NPSM L AIR INLET AIR EXHAUST DIMENSIONS FLUID INLET FLUID OUTLET K C 8.5" 7.4" 8.9" 6.9" 6.1".3" G H I J K L 7.24" 8.3" 3.7" 1" 8,3" 3/8" H F J G Tested at room temperature, with water and flooded pump with 3" positive suction. AIR CONSUMPTION B D A E OUTLET PRESSURE HEAD , , , , , , , ,6 4 14,12 2 6, ,341 14, ,3529 1, ,19 U.S. Garllons per minute NPSH 7 bar 6 bar 1 psi 9 psi 5 bar 7 psi 4 bar 6 psi 3 bar 4 psi 2,6 5,28 7,4 1,5 13, , , ,7 BAR PSI 7 bar 6 bar 5 bar 4 bar 3 bar Meter Feet ,76 1 3, ,29 2 7,6 5 1, ,82 3 1,58 1 3, , Litres per minute CAPACITY 35 12,352 7,6 5 1, ,82 1 3, , ,58 5 1,76 2 7,6 4 14,12 1 3, , ,29 5 1, ,35 2 7,6 1 3,53 21

5 classicflo pumps 3 Part No. Body Diaphragms Balls & O-Rings Free Delivery in GPM Fluid Inlet/ Outlet Max Suction Lift Air Inlet Max Inlet Air PSI Applications 2825 Polypropylene Teflon Teflon 3 1/4 5 1/4 1 PSI 2827 Polypropylene Buna N Buna N 5 3/8 1 1/4 1 PSI 2829 Polypropylene Buna N Buna N 13 1/2 5 1/4 1 PSI 2831 Aluminum Buna N Buna N 13 1/2 5 1/4 1 PSI 2845 Polypropylene Santoprene EPDM 13 1/2 5 1/4 1 PSI 2833 Aluminum Buna N Buna N /8 1 PSI 2834 Aluminum Buna N Buna N /8 1 PSI 2841 Polypropylene Santoprene EPDM 3 3/4 18 3/8 1 PSI 2835 Aluminum Buna N Buna N /8 1 PSI 2842 Polypropylene Santoprene EPDM /8 1 PSI 2838 Aluminum Buna N Buna N 1 1 1/2 18 1/2 1 PSI 2843 Polypropylene Santoprene EPDM 1 1 1/2 18 1/2 1 PSI 284 Aluminum Buna N Buna N /4 1 PSI 2844 Polypropylene Santoprene EPDM /4 1 PSI DEF, LUBRICANTS, LUBRICANTS, LUBRICANTS, UL LISTED; LUBRICANTS, USED OIL, 285 Polypropylene Santoprene EPDM /4 1 PSI 2851 Aluminum Buna N Buna N /4 1 PSI Data sheets on each pump model available at All data sheets include specifications and performance curves Check with Samson customer service for compatibility issues, higher flow rates, or other diaphragm pump needs not shown here 23

Aluminum Dimensions: 7.32" W 9.49"H Net Wt.: 7.9 lbs. (3.6 kg) Shipping Wt.: 9.9 lbs. Stainless Steel

Aluminum Dimensions: 7.32 W 9.49H Net Wt.: 7.9 lbs. (3.6 kg) Shipping Wt.: 9.9 lbs. Stainless Steel DP Series Specifications DP-10 Port Dimensions (6 GPM Max.) Intake & discharge connection: Polypropylene (PPG) 3/8" Female NPT Aluminum (ADC-12) 3/8" Female NPT Stainless Steel (316) 3/8" Female NPT DP-15

More information

NDP-25 Specifications

NDP-25 Specifications NDP-25 Specifications Port Dimensions (46.2 GPM Max.) Intake & discharge connection: Polypropylene (PPG) Kynar (PVDF) Aluminum (ADC-12) Stainless Steel (316) Cast Iron Air inlet (incl. ball valve): Air

More information

Fluid Dispensing Systems

Fluid Dispensing Systems Fluid Dispensing Systems Automotive Commercial Industrial Centerflo Air Operated Double Diaphragm (AODD) Pumps Pumps Signature Series Product Selection Matrix MAX. FREE FLOW CF10 POLYPROPYLENE AIR INLET

More information

DP Series Specifications

DP Series Specifications DP Series Specifications DP-10 Port Dimensions Intake & discharge connection: Polypropylene (PPG) Aluminum (ADC-12) Stainless Steel (316) (6 GPM Max.) 3/8" Female NPT 3/8" Female NPT 3/8" Female NPT DP-15

More information

NDP-50 Specifications

NDP-50 Specifications NDP-50 Specifications Port Dimensions Intake & discharge connection: (164 GPM Max.) Polypropylene (PPG) 2" ANSI B16.5 #150 Kynar (PVDF) 2" ANSI B16.5 #150 Aluminum (ADC-12) 2" ANSI B16.5 #150 (with tapped

More information

CenterFlo Pumps. Air Operated Double Diaphragm (AODD) Pumps. Automotive Commercial Industrial

CenterFlo Pumps. Air Operated Double Diaphragm (AODD) Pumps. Automotive Commercial Industrial CenterFlo Pumps Air Operated Double Diaphragm (AODD) Pumps Automotive Commercial Industrial CenterFlo NEW CenterFlo Technology Diaphragm Pumps Advanced Technology, Superior Performance, Low Maintenance.

More information

MINING & CONSTRUCTION HEAVY-DUTY LUBRICATION EQUIPMENT

MINING & CONSTRUCTION HEAVY-DUTY LUBRICATION EQUIPMENT MINING & CONSTRUCTION HEAVY-DUTY LUBRICATION EQUIPMENT 1 SaMSON Corporation SAMSON, a North Carolina corporation, is one of the SAMOA Industrial Group of companies. SAMSON produces and markets conventional

More information

ADVANCED FLUID MANAGEMENT SOLUTIONS. Sturdy and reliable industrial and diaphragm pumps. 5 YEARS ANNI DI GARANZIA WARRANTY.

ADVANCED FLUID MANAGEMENT SOLUTIONS. Sturdy and reliable industrial and diaphragm pumps. 5 YEARS ANNI DI GARANZIA WARRANTY. ADVANCED FLUID MANAGEMENT SOLUTIONS Sturdy and reliable industrial and diaphragm pumps. 5 ANNI DI 5 YEARS WARRANTY GARANZIA Made In Italy Industrial piston pumps TECHNICAL CHARACTERISTICS Strength points

More information

Husky 515 / 716 Air-Operated Diaphragm Pumps

Husky 515 / 716 Air-Operated Diaphragm Pumps First choice when quality counts. Husky 515 / 716 Air-Operated Diaphragm Pumps 515 1/2 in. non-metallic pumps in acetal, polypropylene, and kynar 716 3/4 in. metal pumps in SST, aluminum No seals to leak

More information

Husky 716 Metal Pumps Air-Operated Double-Diaphragm

Husky 716 Metal Pumps Air-Operated Double-Diaphragm Husky 716 Metal Pumps Air-Operated Double-Diaphragm Features capability for even lower noise levels externally serviceable Husky 716 Aluminum D53XXX or D43XXX Typical Applications Typical Fluids Handled

More information

Industrial Pumping Equipment Air-Operated Diaphragm Pumps

Industrial Pumping Equipment Air-Operated Diaphragm Pumps Industrial ing Equipment -Operated Diaphragm s 85630 85628 85622 85634 ¼" - 2" -Operated s Basic Design Features Diaphragm pumps are driven by compressed air.the directional air distribution valve and

More information

Process Equipment. Air-Operated Pumps for Process Industries

Process Equipment. Air-Operated Pumps for Process Industries Process Equipment Air-Operated s for Process Industries Superior ing Technology 55 Gallon Drum Transfer and Supply from your 55 gallon drums with our double diaphragm or piston evacuation pumps. They offer

More information

Fluid Dispensing Systems

Fluid Dispensing Systems Fluid Dispensing Systems Automotive Commercial Industrial Diesel Exhaust Fluid (DEF) Open Systems Drum and Tote Packages Lever Pump System EPDM seals for maximum chemical compatibility. Includes 1300-028

More information

Husky 3275 Aluminum Pumps Air-Operated Double-Diaphragm

Husky 3275 Aluminum Pumps Air-Operated Double-Diaphragm Husky 3275 Aluminum Pumps Air-Operated Double-Diaphragm Features or bspt is externally serviceable Typical Applications Husky 3275 Aluminum DK3XXX Typical Fluids Handled 50 PROCESS EQUIPMENT CATALOG Husky

More information

professional lubrication equipment automotive

professional lubrication equipment automotive professional LUBRICATION EQUIPMENT AUTOMOTIVE 2 SAMOA Quality For more than 50 years Samoa has been manufacturing equipment for the lubrication professional. Our extensive program, fully designed and manufactured

More information

MINING & CONSTRUCTION HEAVY-DUTY LUBRICATION EQUIPMENT

MINING & CONSTRUCTION HEAVY-DUTY LUBRICATION EQUIPMENT MINING & CONSTRUCTION HEAVY-DUTY LUBRICATION EQUIPMENT 1 A PRODUCT DEVELOPMENT MANUFACTURING DISTRIBUTION C FLUID HANDLING TECHNOLOGY B QUALITY AND LEADERSHIP GLOBALLY COMPETITIVE Headquarters Offices

More information

F20 Series. Maximum Flow Rate: 1.0 gpm (3.8 l/min) Maximum Pressure: 1500 psi (103 bar) for Metallic Pump Heads

F20 Series. Maximum Flow Rate: 1.0 gpm (3.8 l/min) Maximum Pressure: 1500 psi (103 bar) for Metallic Pump Heads F2 Series Maximum Flow Rate: 1. gpm (3.8 l/min) Maximum Pressure: 15 psi (13 bar) for Metallic Pump Heads F2 Series Performance Capacities Max. Max. Flow Input @ 1 psi (69 bar) Model rpm gpm l/min F2-E

More information

Specializing in OEM sales of hydraulic hose, pumps, motors, cylinders, valves, & components

Specializing in OEM sales of hydraulic hose, pumps, motors, cylinders, valves, & components Central Hydraulics Inc. Specializing in OEM sales of hydraulic hose, pumps, motors, cylinders, valves, & components 1-800-264-9571 1:1 Air Powered Double Diaphragm Pumps 3/8 7 GPM Free Flow Rate Acetal

More information

INDUSTRIAL DYEING PUMPS

INDUSTRIAL DYEING PUMPS INDUSTRIAL DYEING PUMPS ADVANCED FLUID MANAGEMENT SOLUTIONS Sturdy and reliable industrial and diaphragm pumps. 5 YEARS ANNI DI WARRANTY GARANZIA Made In In Italy HELP THE NATURE Packaging contains, depending

More information

STATIONARY GREASE PUMP PACKAGES. Model PM grease pump package for 120 lb kegs lb drum cover 966 Follower plate for 400 lb drum

STATIONARY GREASE PUMP PACKAGES. Model PM grease pump package for 120 lb kegs lb drum cover 966 Follower plate for 400 lb drum STATIONARY GREASE PM 3+3 AND 6 Model 336 000 PM 3 + 3 grease pump package for 120 lb kegs 332 PM 3 + 3 high pressure grease pump with bung adapter 1936 120 lb keg cover 964 Follower plate for 120 lb keg

More information

2 YEAR WARRANTY HOSE REELS. reelmaster Series heavy duty, quality hose reel engineered to save space

2 YEAR WARRANTY HOSE REELS. reelmaster Series heavy duty, quality hose reel engineered to save space STANDARD CAPacity 1400 Series 1400 Series heavy duty, quality hose reel engineered to save space 1400 Series* Holds up to 40 of 1/2 Hose For 1/4, and 1/2 I.D. Hose Swivel inlet: 1/2 NPSM Low pressure 1/2

More information

Air Powered Double Diaphragm Pumps

Air Powered Double Diaphragm Pumps Air Powered Double Diaphragm Pumps Notes. TC-X 030 Series Standard Diaphragm Pumps with 1/4" Connections Liquid Flow Rate: Maximum Air Inlet Pressure: Wetted Body Material Options; 1 to 8 L/min. (2.14

More information

AIR OPERATED DOUBLE DIAPHRAGM PUMPS

AIR OPERATED DOUBLE DIAPHRAGM PUMPS LEADING THROUGH INNOVATION entral flow technology AIR OPERATED DOUBLE DIAPHRAGM PUMPS Innovative I Unique I Simple I Reliable I Durable I ompact I Efficient I Quiet I Versatile 1 Headquarters Offices and

More information

D/G-12 Series. Up to 8 gpm (30.3 l/min)

D/G-12 Series. Up to 8 gpm (30.3 l/min) D/G-12 Series Up to 8 gpm (3.3 l/min) D/G-12 Vertical Applications The D/G-12 is specifically designed for vertical pumping installations such as machine tool cooling applications. D/G-12 shown with Hydra-Cell

More information

A200-2 INCH AIR OPERATED DOUBLE DIAPHRAGM PUMP

A200-2 INCH AIR OPERATED DOUBLE DIAPHRAGM PUMP A200-2 INCH AIR OPERATED DOUBLE DIAPHRAGM PUMP A200 2 PUMP 2 ALUMINUM NPT or BSP Connections Zinc Plated Hardware Non-Metallic Muffler Suction Center Front / Discharge Center Rear Standard Porting SPECIFICATIONS

More information

OPERATION MANUAL. ALUMINUM Models. 316 S.S. Models NTG25 NOMAD TRANS-FLO AIR-OPERATED DOUBLE DIAPHRAGM PUMPS. A JDA Global Company. 1/14 rev.

OPERATION MANUAL. ALUMINUM Models. 316 S.S. Models NTG25 NOMAD TRANS-FLO AIR-OPERATED DOUBLE DIAPHRAGM PUMPS. A JDA Global Company. 1/14 rev. OPERATION MANUAL NTG25 NOMAD TRANS-FLO AIR-OPERATED DOUBLE DIAPHRAGM PUMPS ALUMINUM Models 316 S.S. Models A JDA Global Company 1/14 rev. 3 CAUTION SAFETY POINTS TEMPERATURE LIMITS: Neoprene -17.8 C to

More information

H/G-25 Series. Up to 20 gpm (75.7/min) H/G-25 Specialized Designs

H/G-25 Series. Up to 20 gpm (75.7/min) H/G-25 Specialized Designs H/G-25 Series Up to 2 gpm (75.7/min) H/G-25 Specialized Designs Hydra-Cell Slurry Duty pumps are specifically designed for abrasive slurry applications. See page 8 for complete specifications. The H-25

More information

Lube PUMP PACKAGES. pumpmaster 3+3 and 6

Lube PUMP PACKAGES. pumpmaster 3+3 and 6 stationary grease pump packages pumpmaster 3+3 and 6 Model 336000 PumpMaster 3 + 3 grease pump package for 120 lb kegs 332 PumpMaster 3 + 3 high pressure grease pump with bung adapter 1936 120 lb keg cover

More information

AIR OPERATED DOUBLE DIAPHRAGM PUMPS

AIR OPERATED DOUBLE DIAPHRAGM PUMPS LEADING THROUGH INNOVATION entral flow technology AIR OPERATED DOUBLE DIAPHRAGM PUMPS Innovative I Unique I Simple I Reliable I Durable I ompact I Efficient I Quiet I Versatile 1 Headquarters Offices and

More information

D/G-04 Series. Up to 3.0 gpm (11.3 l/min)

D/G-04 Series. Up to 3.0 gpm (11.3 l/min) D/G-4 Series Up to 3. gpm (11.3 l/min) 42 United States Instant Information: United Kingdom D/G-4 Series Performance flow max max flow input model gpm l/min rpm D/G-4-X 2.9 11. 175 D/G-4-E 2.1 7.8 175

More information

6-7/16" (164 mm) 6" (152 mm) Torque in. lbs. 4-7/8" (124 mm)

6-7/16 (164 mm) 6 (152 mm) Torque in. lbs. 4-7/8 (124 mm) Gemini / Diaphragm Pumps Max. Flow Pump #88830 (SS), #8883 (Polypro), #88833 (Polypro), #88836 (Acetal), #88837 (Alum), #8883 (Acetal), #88834 (SS), #88835 (Polypro), #88838 (Alum) /" NPT (F) Fluid Outlet

More information

2062 ½ NPTM x ¼ NPTF bushing ½ NPTM x 3/8 NPTF bushing ½ NPTM x 3/8 NPTF bushing

2062 ½ NPTM x ¼ NPTF bushing ½ NPTM x 3/8 NPTF bushing ½ NPTM x 3/8 NPTF bushing stationary grease pump packages pumpmaster 3, 3+3 and 6 3 Model 306000 PumpMaster 3 grease pump package for 120 lb kegs 302 PumpMaster 3 high pressure grease pump with bung adapter 1936 120 lb keg cover

More information

LUBRICATION AND FLUID HANDLING SYSTEMS AND COMPONENTS

LUBRICATION AND FLUID HANDLING SYSTEMS AND COMPONENTS LUBRICATION AND FLUID HANDLING SYSTEMS AND COMPONENTS LUBRICATION AND FLUID HANDLING SYSTEMS AND COMPONENTS products catalogue v212 SAMOA Quality For more than 50 years SAMOA has been manufacturing equipment

More information

LUBRICATION EQUIPMENT PUMPS AND ACCESSORIES

LUBRICATION EQUIPMENT PUMPS AND ACCESSORIES LUBRICATION EQUIPMENT PUMPS AND ACCESSORIES ARO Lubrication Equipment. For over 85 years, the ARO Fluid Products business of Ingersoll Rand has developed relationships with more than 200 original equipment

More information

G03 Mono-Block Series

G03 Mono-Block Series G03 Mono-Block Series Maximum Flow Rate: 11.7 l/min (3.1 gpm) Maximum Pressure: 103 bar (1500 psi) for Metallic Pump Heads ATEX Mono-Block (G03) Shaft-driven with Stainless Steel pump head Mono-Block (G03)

More information

E8 Mini-Matic 3/8" Bolted Plastic Pumps Operating Instructions

E8 Mini-Matic 3/8 Bolted Plastic Pumps Operating Instructions E8 Mini-Matic 3/8" Bolted Plastic Pumps Operating Instructions Polypropylene SAFETY WARNINGS Read these instructions completely before installation and start-up. It is the responsibility of the purchaser

More information

OPERATION MANUAL. ALUMINUM Models. 316 S.S. Models NTG40 NOMAD TRANS-FLO AIR-OPERATED DOUBLE DIAPHRAGM PUMPS. A JDA Global Company. 1/14, Rev.

OPERATION MANUAL. ALUMINUM Models. 316 S.S. Models NTG40 NOMAD TRANS-FLO AIR-OPERATED DOUBLE DIAPHRAGM PUMPS. A JDA Global Company. 1/14, Rev. OPERATION MANUAL NTG40 NOMAD TRANS-FLO AIR-OPERATED DOUBLE DIAPHRAGM PUMPS ALUMINUM Models 316 S.S. Models A JDA Global Company 1/14, Rev. 3 CAUTION SAFETY POINTS TEMPERATURE LIMITS: Neoprene -17.8 C to

More information

G20 Series. 24 bar (350 psi) for Non-metallic Pump Heads. G20 Close-coupled with Brass pump head ATEX. G20 Version 5 10/16

G20 Series. 24 bar (350 psi) for Non-metallic Pump Heads. G20 Close-coupled with Brass pump head ATEX. G20 Version 5 10/16 G20 Series Maximum Flow Rate: Maximum Pressure: 3.8 l/min (1.0 gpm) 103 bar (1500 psi) for Metallic Pump Heads 24 bar (350 psi) for Non-metallic Pump Heads ATEX G20 Close-coupled with Brass pump head G21

More information

G10 Series API bar (350 psi) for Non-metallic Pump Heads. G10 with Cast Iron pump head

G10 Series API bar (350 psi) for Non-metallic Pump Heads. G10 with Cast Iron pump head G1 Series Maximum Flow Rate: Maximum Pressure: 33.4 l/min (8.8 gpm) 13 bar (15 psi) for Metallic Pump Heads 24 bar (35 psi) for Non-metallic Pump Heads API 674 ATEX G1 with Cast Iron pump head G1 with

More information

F/G-20 Series. Up to 1.0 gpm (3.8 l/min) f/g-20 hydra-cell diaphragm pump

F/G-20 Series. Up to 1.0 gpm (3.8 l/min) f/g-20 hydra-cell diaphragm pump f/g-20 hydra-cell diaphragm pump F/G-20 Series Up to 1.0 gpm (3.8 l/min) F/G-22 with Pump/Motor Adapter for coupling to NEMA C-Face and IEC B5 Flange motors F/G-20 hollow shaft for close coupling with

More information

G03 Series. 24 bar (350 psi) for Non-metallic Pump Heads. G03 Shaft-driven with Stainless Steel pump head

G03 Series. 24 bar (350 psi) for Non-metallic Pump Heads. G03 Shaft-driven with Stainless Steel pump head G03 Series Maximum Flow Rate: Maximum Pressure: 11.7 l/min (3.1 gpm) 103 bar (1500 psi) for Metallic Pump Heads 24 bar (350 psi) for Non-metallic Pump Heads ATEX G03 Shaft-driven with Stainless Steel pump

More information

OPERATION MANUAL. ALUMINUM Models DUCTILE Models 316 S.S. Models AIR-OPERATED DOUBLE DIAPHRAGM PUMPS

OPERATION MANUAL. ALUMINUM Models DUCTILE Models 316 S.S. Models AIR-OPERATED DOUBLE DIAPHRAGM PUMPS OPERATION MANUAL 3 METALLIC PUMP (CLAMPED) PWR-FLO TM AIR DISTRIBUTION SYSTEM NPF80 AIR-OPERATED DOUBLE DIAPHRAGM PUMPS ALUMINUM Models DUCTILE Models 316 S.S. Models A JDA Global Company CAUTIONS - READ

More information

Ink Manufacturing and Printing Solutions

Ink Manufacturing and Printing Solutions Ink Manufacturing and Printing Solutions Solutions for pail, drum, or bulk tank ink applications Springer Pumps, LLC Tel: 866-777-6060 Fax: 866-777-6383 INFO@springerpumps.com Leading The Way In Quality

More information

Process Equipment Buyer s Guide Diaphragm Pumps for Industrial and Sanitary Applications

Process Equipment Buyer s Guide Diaphragm Pumps for Industrial and Sanitary Applications Process Equipment Buyer s Guide Diaphragm Pumps for Industrial and Sanitary Applications PROVEN QUALITY. LEADING TECHNOLOGY. Table of Contents PROCESS EQUIPMENT AND ACCESSORIES TABLE OF CONTENTS Selection

More information

F-SERIES FDA AIR DIAPHRAGM PUMPS

F-SERIES FDA AIR DIAPHRAGM PUMPS F-SERIES FDA AIR DIAPHRAGM PUMPS FDA AIR DIAPHRAGM PUMPS DIMENSION FDA PUMPS FDA Grade Elastomers Electropolished and Passivated Stainless Steel Wet End Parts Oversized Tri-Clamp Connection Standard Limited

More information

H/G-25 Series. Up to 20 gpm (75.7/min) H/g-25 hydra-cell diaphragm pump. H/G-25 Specialized Designs

H/G-25 Series. Up to 20 gpm (75.7/min) H/g-25 hydra-cell diaphragm pump. H/G-25 Specialized Designs H/g-25 hydra-cell diaphragm pump H/G-25 Series Up to 2 gpm (75.7/min) H/G-25 Specialized Designs Hydra-Cell Slurry Duty pumps are specifically designed for abrasive slurry applications. See page 8 for

More information

Husky 515 and 716. Air-Operated Double Diaphragm Pumps GRACO SEALANT AND ADHESIVE EQUIPMENT PUMPS AND PACKAGES. Features and Benefits

Husky 515 and 716. Air-Operated Double Diaphragm Pumps GRACO SEALANT AND ADHESIVE EQUIPMENT PUMPS AND PACKAGES. Features and Benefits GRO SELNT N HESIVE EQUIPMENT PUMPS N PKGES Husky 55 and 76 Features and enefits No sliding seals to leak or fail Quiet running less than 85 da with easy-to-use remote muffler capability for even lower

More information

G66 Series API bar (250 psi) for Non-metallic Pump Heads. G66 with Ductile Iron pump head. G66 with Polypropylene pump head.

G66 Series API bar (250 psi) for Non-metallic Pump Heads. G66 with Ductile Iron pump head. G66 with Polypropylene pump head. G66 Series Maximum Flow Rate: Maximum Pressure: 248.7 l/min (65.7 gpm) 48 bar (7 psi) for Metallic Pump Heads 17 bar (25 psi) for Non-metallic Pump Heads API 674 ATEX G66 with Ductile Iron pump head www.hydra-cell.eu

More information

A200-2 INCH AIR OPERATED DOUBLE DIAPHRAGM PUMP

A200-2 INCH AIR OPERATED DOUBLE DIAPHRAGM PUMP A200-2 INCH AIR OPERATED DOUBLE DIAPHRAGM PUMP A200 2 PUMP 2 ALUMINUM NPT or BSP Connections Zinc Plated Hardware Non-Metallic Muffler Suction Center Front / Discharge Center Rear Standard Porting 2 STAINLESS

More information

08 WASTE OIL EQUIPMENT

08 WASTE OIL EQUIPMENT 08 WASTE OIL EQUIPMENT WASTE OIL GRAVITY RECEIVERS, 100 LITRES 98 WASTE OIL GRAVITY RECEIVERS, 70 LITRES 99 waste oil suction units, 100 litres 100 waste oil suction units, 24 and 70 litres 101 combined

More information

D/G-35 Series. Up to 37gpm (140 l/min) D/g-35 hydra-cell diaphragm pump. D/G-35 Specialized Designs

D/G-35 Series. Up to 37gpm (140 l/min) D/g-35 hydra-cell diaphragm pump. D/G-35 Specialized Designs D/g-35 hydra-cell diaphragm pump D/G-35 Series Up to 37gpm (14 l/min) D/G-35 Specialized Designs Hydra-Cell Slurry Duty pumps are specifically designed for abrasive slurry applications. See page 8 for

More information

INDUSTRIAL LUBRICATION EQUIPMENT MINING AND CONSTRUCTION

INDUSTRIAL LUBRICATION EQUIPMENT MINING AND CONSTRUCTION INDUSTRIAL LUBRICATION EQUIPMENT MINING AND CONSTRUCTION SAMOA Quality For more than 50 years Samoa has been manufacturing equipment for the lubrication professional. Our extensive program, fully designed

More information

OPERATION MANUAL AIR-OPERATED DOUBLE DIAPHRAGM PUMPS 3 POLYPROPYLENE PUMP PWR-FLO TM AIR DISTRIBUTION SYSTEM NPF 80. A JDA Global Company

OPERATION MANUAL AIR-OPERATED DOUBLE DIAPHRAGM PUMPS 3 POLYPROPYLENE PUMP PWR-FLO TM AIR DISTRIBUTION SYSTEM NPF 80. A JDA Global Company OPERATION MANUAL 3 POLYPROPYLENE PUMP PWR-FLO TM AIR DISTRIBUTION SYSTEM NPF 80 AIR-OPERATED DOUBLE DIAPHRAGM PUMPS A JDA Global Company CAUTIONS - READ FIRST CAUTION: Do not apply compressed air to the

More information

OPERATION MANUAL. ALUMINUM Models DUCTILE Models 316 S.S. Models AIR-OPERATED DOUBLE DIAPHRAGM PUMPS

OPERATION MANUAL. ALUMINUM Models DUCTILE Models 316 S.S. Models AIR-OPERATED DOUBLE DIAPHRAGM PUMPS OPERATION MANUAL 2 METALLIC PUMP (CLAMPED) PWR-FLO TM AIR DISTRIBUTION SYSTEM NPF50 AIR-OPERATED DOUBLE DIAPHRAGM PUMPS ALUMINUM Models DUCTILE Models 316 S.S. Models A JDA Global Company CAUTIONS - READ

More information

D/G-10 Series. Up to 8 gpm (30.3 l/min) D/g-10 hydra-cell diaphragm pump. D/G-10 Specialized Designs

D/G-10 Series. Up to 8 gpm (30.3 l/min) D/g-10 hydra-cell diaphragm pump. D/G-10 Specialized Designs D/g-1 hydra-cell diaphragm pump D/G-1 Series Up to 8 gpm (3.3 l/min) D/G-1 Specialized Designs Hydra-Cell Slurry Duty pumps are specifically designed for abrasive slurry applications. See page 8 for complete

More information

12 Volt DC Diaphragm Pumps Series 400

12 Volt DC Diaphragm Pumps Series 400 Page 1 of 6 12 Volt DC Diaphragm Pumps Series 400 More Information Index Description of Included Models Safety Listings Available Options Accessories Performance Flow Curve Fluid Compatibility Dimensions

More information

OPERATION MANUAL.25 METALLIC PUMP PWR-FLO TM AIR DISTRIBUTION SYSTEM

OPERATION MANUAL.25 METALLIC PUMP PWR-FLO TM AIR DISTRIBUTION SYSTEM OPERATION MANUAL.25 METALLIC PUMP PWR-FLO TM AIR DISTRIBUTION SYSTEM CAUTIONS - READ FIRST CAUTION: Do not apply compressed air to the exhaust port pump will not function. CAUTION: Do not exceed 79 C (174

More information

DIAPHRAGM PUMPS ENTIRELY IN POLYPROPYLENE. Made in Italy. No. E15/PPB

DIAPHRAGM PUMPS ENTIRELY IN POLYPROPYLENE. Made in Italy. No. E15/PPB DIAPHRAGM PUMPS ENTIRELY IN POLYPROPYLENE Made in Italy No. E15/PPB HELP THE NATURE Packaging contains, depending on the articles, one or more of the following materials; they must be recycled in accordance

More information

:1 3:1 5:1 3:1 3:1 5:1 3:1 3:1 5:

:1 3:1 5:1 3:1 3:1 5:1 3:1 3:1 5: trolley for drums 30-60 kg kit for drums 30-60 kg 35260 35250 37500 35249 35259 37499 35264 35254 37504 3:1 3:1 5:1 3:1 3:1 5:1 3:1 3:1 5:1 20 14 18 20 14 18 20 14 18 35076 35173 36073 35076 35173 36073

More information

69 bar (1000 psi) for Metallic Pump Heads 24 bar (350 psi) for Non-metallic Pump Heads

69 bar (1000 psi) for Metallic Pump Heads 24 bar (350 psi) for Non-metallic Pump Heads G25 Series Maximum Flow Rate: Maximum Pressure: 76 l/min (20.0 gpm) 69 bar (1000 psi) for Metallic Pump Heads 24 bar (350 psi) for Non-metallic Pump Heads API 674 ATEX G25 with Cast Iron pump head G25

More information

OPERATION MANUAL AIR-OPERATED DOUBLE DIAPHRAGM PUMPS 2 POLYPROPYLENE PUMP PWR-FLO TM AIR DISTRIBUTION SYSTEM NPF 50 BOLTED. A JDA Global Company

OPERATION MANUAL AIR-OPERATED DOUBLE DIAPHRAGM PUMPS 2 POLYPROPYLENE PUMP PWR-FLO TM AIR DISTRIBUTION SYSTEM NPF 50 BOLTED. A JDA Global Company OPERATION MANUAL 2 POLYPROPYLENE PUMP PWR-FLO TM AIR DISTRIBUTION SYSTEM NPF 50 BOLTED AIR-OPERATED DOUBLE DIAPHRAGM PUMPS A JDA Global Company CAUTIONS - READ FIRST CAUTION: Do not apply compressed air

More information

G25 Series API bar (350 psi) for Non-metallic Pump Heads. G25 with Cast Iron pump head

G25 Series API bar (350 psi) for Non-metallic Pump Heads. G25 with Cast Iron pump head G25 Series Maximum Flow Rate: Maximum Pressure: 76 l/min (20.0 gpm) 69 bar (1000 psi) for Metallic Pump Heads 24 bar (350 psi) for Non-metallic Pump Heads API 674 ATEX G25 with Cast Iron pump head G25

More information

H25 Series. Maximum Flow Rate: 20.0 gpm (75.9 l/min) Maximum Pressure: 1000 psi (69 bar) for Metallic Pump Heads

H25 Series. Maximum Flow Rate: 20.0 gpm (75.9 l/min) Maximum Pressure: 1000 psi (69 bar) for Metallic Pump Heads 25 Series Maximum Flow Rate: 2. gpm (75.9 l/min) Maximum Pressure: 1 psi (69 bar) for Metallic Pump eads 25 Series Performance apacities Max. Max. Flow Input @ 1 psi (69 bar) Model rpm gpm l/min 25-115

More information

G10 Series API bar (350 psi) for Non-metallic Pump Heads. G10 with Cast Iron pump head

G10 Series API bar (350 psi) for Non-metallic Pump Heads. G10 with Cast Iron pump head G10 Series Maximum Flow Rate: Maximum Pressure: 33.4 l/min (8.8 gpm) 103 bar (1500 psi) for Metallic Pump Heads 24 bar (350 psi) for Non-metallic Pump Heads API 674 ATEX G10 with Cast Iron pump head G10

More information

OPERATION MANUAL. ALUMINUM Models. 316 S.S. Models NTG50 NOMAD TRANS-FLO AIR-OPERATED DOUBLE DIAPHRAGM PUMPS. A JDA Global Company. 1/14 rev.

OPERATION MANUAL. ALUMINUM Models. 316 S.S. Models NTG50 NOMAD TRANS-FLO AIR-OPERATED DOUBLE DIAPHRAGM PUMPS. A JDA Global Company. 1/14 rev. OPERATION MANUAL NTG50 NOMAD TRANS-FLO AIR-OPERATED DOUBLE DIAPHRAGM PUMPS ALUMINUM Models 316 S.S. Models A JDA Global Company 1/14 rev.3 CAUTION SAFETY POINTS TEMPERATURE LIMITS: Neoprene -17.8 C to

More information

G04 Series. Maximum Flow Rate: 11.2 l/min (2.9 gpm) Maximum Pressure: 200 bar (2900 psi) for Metallic Pump Heads. G04 with Stainless Steel pump head

G04 Series. Maximum Flow Rate: 11.2 l/min (2.9 gpm) Maximum Pressure: 200 bar (2900 psi) for Metallic Pump Heads. G04 with Stainless Steel pump head G04 Series Maximum Flow Rate: 11.2 l/min (2.9 gpm) Maximum Pressure: 200 bar (2900 psi) for Metallic Pump Heads ATEX G04 with Stainless Steel pump head G04 with Brass pump head G04 with Stainless Steel

More information

OPERATION MANUAL. DUCTILE Models NT100 NOMAD TRANS-FLO AIR-OPERATED DOUBLE DIAPHRAGM PUMPS. A JDA Global Company. 5/13 rev.2

OPERATION MANUAL. DUCTILE Models NT100 NOMAD TRANS-FLO AIR-OPERATED DOUBLE DIAPHRAGM PUMPS. A JDA Global Company. 5/13 rev.2 OPERATION MANUAL NT100 NOMAD TRANS-FLO AIR-OPERATED DOUBLE DIAPHRAGM PUMPS DUCTILE Models A JDA Global Company 5/13 rev.2 CAUTION SAFETY POINTS TEMPERATURE LIMITS: Neoprene -17.8 C to 93.3 C 0 F to 200

More information

OPERATION MANUAL NT80 NOMAD TRANS-FLO AIR-OPERATED DOUBLE DIAPHRAGM PUMPS. A JDA Global Company. 5/13 rev.2

OPERATION MANUAL NT80 NOMAD TRANS-FLO AIR-OPERATED DOUBLE DIAPHRAGM PUMPS. A JDA Global Company. 5/13 rev.2 OPERATION MANUAL AIR-OPERATED DOUBLE DIAPHRAGM PUMPS A JDA Global Company 5/13 rev.2 CAUTION SAFETY POINTS TEMPERATURE LIMITS: Neoprene -17.8 C to 93.3 C 0 F to 200 F Buna-N -12.2 C to 82.2 C 10 F to 180

More information

COMPRESSED AIR WATER DIESEL LUBRICANTS ANTIFREEZE WINDSHIELD WASH GREASE AdBlue

COMPRESSED AIR WATER DIESEL LUBRICANTS ANTIFREEZE WINDSHIELD WASH GREASE AdBlue HOSE REELS HOSE REEL MOUNTING RECOMMENDATIONS........................................ RM-12 DOUBLE PEDESTAL DOUBLE ARM HOSE REELS.................................. RM-12US ULTRA SLIM ENCLOSED HOSE REELS......................................

More information

EXPLODED VIEW & PARTS LIST

EXPLODED VIEW & PARTS LIST SECTION 8 EXPLODED VIEW & PARTS LIST ALUMINUM, A300-*AA-****-*** 10 20 30 352 40 322 40 OPTIONAL 311 342 360 323 381 312 321 61 62 70 385 341 383 80 90 100 110 120 130 140 150 160 353 170 355 372 384 330

More information

Hydra-Cell T80 Series Pumps Design Advantages

Hydra-Cell T80 Series Pumps Design Advantages Hydra-Cell T80 Series Pumps Design Advantages An Economical and Environmental Choice Hydra-Cell is a positive displacement, multiple-diaphragm pump featuring a seal-less design that provides full containment

More information

Process Equipment. Pumping Solutions for Process Industries. Springer Pumps, LLC. Tel: Fax:

Process Equipment. Pumping Solutions for Process Industries. Springer Pumps, LLC. Tel: Fax: Process Equipment Pumping Solutions for Process Industries Electric Double Diaphragm Pumps Husky 1050e Diaphragm Pumps Eliminate unnecessary pump failures, improve your facilities energy efficiency and

More information

G10 Series API bar (350 psi) for Non-metallic Pump Heads. G10 with Cast Iron pump head

G10 Series API bar (350 psi) for Non-metallic Pump Heads. G10 with Cast Iron pump head G10 Series Maximum Flow Rate: Maximum Pressure: 33.4 l/min (8.8 gpm) 103 bar (1500 psi) for Metallic Pump Heads 24 bar (350 psi) for Non-metallic Pump Heads API 674 ATEX G10 with Cast Iron pump head G10

More information

G35 Series API bar (1500 psi) for Metallic Pump Heads. G35 with Stainless Steel pump head and SAE flanges. G35 with Brass pump head

G35 Series API bar (1500 psi) for Metallic Pump Heads. G35 with Stainless Steel pump head and SAE flanges. G35 with Brass pump head G35 Series Maximum Flow Rate: Maximum Pressure: 138 l/min (36.5 gpm) 103 bar (1500 psi) for Metallic Pump Heads API 674 ATEX G35 with Stainless Steel pump head and SAE flanges G35 with Cast Iron pump head

More information

AIR OPERATED OIL PUMPS AND KITS

AIR OPERATED OIL PUMPS AND KITS PM 2 AIR OPERATED OIL PUMPS AND KITS PM 2 Oil pump, pressure ratio : 0 Double acting air operated pumps for transferring lubricants and other non-corrosive fluids. Pump includes bung adapter. New Model

More information

103 bar (1500 psi) for Metallic Pump Heads

103 bar (1500 psi) for Metallic Pump Heads G35 Series Maximum Flow Rate: Maximum Pressure: 138 l/min (36.5 gpm) 13 bar (15 psi) for Metallic Pump Heads API 674 ATEX G35 with Stainless Steel pump head and SAE flanges G35 with Brass pump head G35

More information

T100 Series Medium Pressure Models T100K & T100M

T100 Series Medium Pressure Models T100K & T100M T100 Series Medium Pressure Models T100K & T100M Maximum Flow Rate: Maximum Pressure: 170 l/min (45 gpm) 241 bar (3500 psi) API 674 ATEX T100 Series medium pressure model with Stainless Steel pump head

More information

Versa-Matic. Operating Manual. 3/8" Bolted Plastic Pumps. Polypropylene Kynar

Versa-Matic. Operating Manual. 3/8 Bolted Plastic Pumps. Polypropylene Kynar Versa-Matic Operating Manual 3/8" Bolted Plastic Pumps Polypropylene Kynar E8 SAFETY WARNINGS Read these instructions completely before installation and start-up. It is the responsibility of the purchaser

More information

OPERATION MANUAL NT50 NOMAD TRANS-FLO AIR-OPERATED DOUBLE DIAPHRAGM PUMPS. A JDA Global Company. 7/11 rev. 1

OPERATION MANUAL NT50 NOMAD TRANS-FLO AIR-OPERATED DOUBLE DIAPHRAGM PUMPS. A JDA Global Company. 7/11 rev. 1 OPERATION MANUAL NT50 NOMAD TRANS-FLO AIR-OPERATED DOUBLE DIAPHRAGM PUMPS A JDA Global Company 7/11 rev. 1 CAUTION SAFETY POINTS TEMPERATURE LIMITS: Neoprene -17.8 C to 93.3 C 0 F to 200 F Buna-N -12.2

More information

Process Equipment. Pumping Solutions for Process Industries

Process Equipment. Pumping Solutions for Process Industries Process Equipment Pumping Solutions for Process Industries Electric Double Diaphragm Pumps Husky Electric Diaphragm Pumps Eliminate unnecessary pump failures, improve your facilities energy efficiency

More information

Air Operated Double Diaphragm Pump. M-Pump ½ Metallic Non Metallic Pump INSTALLATION, OPERATION & MAINTENANCE MANUAL

Air Operated Double Diaphragm Pump. M-Pump ½ Metallic Non Metallic Pump INSTALLATION, OPERATION & MAINTENANCE MANUAL Air Operated Double Diaphragm Pump M-Pump ½ Metallic Non Metallic Pump INSTALLATION, OPERATION & MAINTENANCE MANUAL 0.5 I.O.M rev 05. 12/2015 INDEX Title Section Introduction.1 Safety.2 Warranty, General

More information

OPERATION MANUAL 2 POLYPROPYLENE PUMP DURA-FLO TM AIR DISTRIBUTION SYSTEM

OPERATION MANUAL 2 POLYPROPYLENE PUMP DURA-FLO TM AIR DISTRIBUTION SYSTEM OPERATION MANUAL 2 POLYPROPYLENE PUMP DURA-FLO TM AIR DISTRIBUTION SYSTEM CAUTIONS - READ FIRST CAUTION: Do not apply compressed air to the exhaust port pump will not function. CAUTION: Do not exceed 82

More information

OPERATION MANUAL 1 POLYPROPYLENE PUMP DURA-FLO TM AIR DISTRIBUTION SYSTEM

OPERATION MANUAL 1 POLYPROPYLENE PUMP DURA-FLO TM AIR DISTRIBUTION SYSTEM OPERATION MANUAL 1 POLYPROPYLENE PUMP DURA-FLO TM AIR DISTRIBUTION SYSTEM CAUTIONS - READ FIRST CAUTION: Do not apply compressed air to the exhaust port pump will not function. CAUTION: Do not exceed 82

More information

Versa-Matic SOLUTIONS. Experience Superior Performance. Multiple Porting Options. Shoe Valve Technology. Adaptable Footprint

Versa-Matic SOLUTIONS. Experience Superior Performance. Multiple Porting Options. Shoe Valve Technology. Adaptable Footprint Versa-Matic SOLUTIONS /2 (.mm) metallic and non-metallic bolted Experience Superior Multiple Porting Options Top, side and end porting for both inlet and discharge Shoe Valve Technology On / Off / On reliability,

More information

Hydra-Cell Metering Accessories and Options

Hydra-Cell Metering Accessories and Options Hydra-Cell Metering Accessories and Options P Series System Illustration PULSATION DAMPENER (OPTIONAL) BACK PRESSURE VALVE RELIEF VALVE (To process) PRESSURE GAUGE CALIBRATION CYLINDER CONTROLLERS & MOTORS

More information

Flow rate l/min Burst pressure bar. ± 200 ± 200 ± 200 Accuracy ± 0,3 % ± 0,5 % ± 0,5 % Net weight kg

Flow rate l/min Burst pressure bar. ± 200 ± 200 ± 200 Accuracy ± 0,3 % ± 0,5 % ± 0,5 % Net weight kg DIGITAL Meter Flow rate 35 l/min Flow rate 70 l/min Flow rate 40 l/min RAASM s digital meters, besides gauging the liquid delivered, can show instant flow rates, provide a reset total and allow the setting

More information

AIR VALVE No-lube, no-stall design. SOLIDS-HANDLING Up to.71 in. (18mm)

AIR VALVE No-lube, no-stall design. SOLIDS-HANDLING Up to.71 in. (18mm) B75 Non-Metallic Design Level 2 Ball Valve Air-Powered Double-Diaphragm Pump Air Exhaust Side View Air Inlet Side View ENGINEERING, PERFORMANCE & CONSTRUCTION DATA INTAKE/DISCHARGE PIPE SIZE 3" ANSI Flange

More information

Customer Service Product Training Research & Development Parts and Service for All Yamada Pumps Application Engineering Industry Knowledge

Customer Service Product Training Research & Development Parts and Service for All Yamada Pumps Application Engineering Industry Knowledge The Yamada Corporation has been a leading producer of industrial equipment since 195, and of fluid handling products for over 6 years. As a pioneer of pumping technology, Yamada is known in many industries

More information

T100 Series Medium Pressure Models T100K & T100M

T100 Series Medium Pressure Models T100K & T100M T100 Series Medium Pressure Models T100K & T100M Maximum Flow Rate: Maximum Pressure: 45 gpm (170.4 l/min) 1543 BPD 3500 psi (241 bar) T100 Series medium-pressure model with Nickel Aluminum Bronze pump

More information

T100 Series Low Pressure Models T100E, T100F & T100H

T100 Series Low Pressure Models T100E, T100F & T100H T100 Series Low Pressure Models T100E, T100F & T100H Maximum Flow Rate: Maximum Pressure: 366 l/min (96 gpm) 145 bar (2100 psi) API 674 T100 Series low pressure model with Stainless Steel pump head Available

More information

OPERATION MANUAL. ALUMINUM Models 316 S.S. Models AIR-OPERATED DOUBLE DIAPHRAGM PUMPS .5 METALLIC PUMP PWR-FLO TM AIR DISTRIBUTION SYSTEM NPF 15

OPERATION MANUAL. ALUMINUM Models 316 S.S. Models AIR-OPERATED DOUBLE DIAPHRAGM PUMPS .5 METALLIC PUMP PWR-FLO TM AIR DISTRIBUTION SYSTEM NPF 15 OPERATION MANUAL.5 METALLIC PUMP PWR-FLO TM AIR DISTRIBUTION SYSTEM NPF 15 AIR-OPERATED DOUBLE DIAPHRAGM PUMPS ALUMINUM Models 316 S.S. Models A JDA Global Company 2 CAUTIONS - READ FIRST CAUTION: Do not

More information

G20 Series. G20 Close-coupled with Brass pump head ATEX. G20 Version 1 01/15

G20 Series. G20 Close-coupled with Brass pump head ATEX. G20 Version 1 01/15 G20 Series Maximum Flow Rate: 3.8 l/min (1.0 gpm) Maximum Pressure: 103 bar (1500 psi) for Metallic Pump Heads 24 bar (350 psi) for Non-metallic Pump Heads AEX G20 Close-coupled with Brass pump head G21

More information

Process Equipment. Air-Operated Pumps and Accessories for Process Industries

Process Equipment. Air-Operated Pumps and Accessories for Process Industries Process Equipment Air-Operated Pumps and Accessories for Process Industries Superior Pumping Technology The Most Durable Piston and Diaphragm Pumps! At Graco, we provide durable pumping solutions for your

More information

OPERATOR S MANUAL

OPERATOR S MANUAL OPERATOR S MANUAL 164622 INCLUDING: OPERATION, INSTALLATION AND MAINTENANCE RELEASED: 12-24-13 REVISED: 1-26-18 (REV: D) 1/2 DIAPHRAGM PUMP 1:1 RATIO (NON-METALLIC) 164631, 164633, 164635, 164637 and 161586

More information

Process Equipment. Air-Operated Pumps for Process Industries

Process Equipment. Air-Operated Pumps for Process Industries Process Equipment Air-Operated Pumps for Process Industries Superior Pumping Technology 55 Gallon Drum Transfer and Supply Pump from your 55 gallon drums with our double diaphragm or piston evacuation

More information

T100 Series Medium Pressure Models T100K & T100M

T100 Series Medium Pressure Models T100K & T100M T100 Series Medium Pressure Models T100K & T100M Maximum Flow Rate: Maximum Pressure: 170 l/min (45 gpm) 1543 BPD 241 bar (3500 psi) API 674 ATEX T100 Series medium pressure model with Stainless Steel

More information

...your single dedicated resource for cost-effective mine pumping solutions. For Rugged Mining Duty

...your single dedicated resource for cost-effective mine pumping solutions. For Rugged Mining Duty ...your single dedicated resource for cost-effective mine pumping solutions For Rugged Mining Duty Mine Face Dewatering Fuel Transfer Sump Transfer Muck/Slimes/Slurry Drift Dewatering Drillers Mud Dewater

More information

A measured step forward. AIRTRAN TM - Air Operated Diaphragm Pumps

A measured step forward. AIRTRAN TM - Air Operated Diaphragm Pumps A measured step forward AIRTRAN TM - Air Operated Diaphragm Pumps TM Products you can rely on Lutz-JESCO America s AIRTRAN TM - Air Operated Diaphragm Transfer - pumps are a natural complement to the Lutz-JESCO

More information

Yamada America, Inc. 955 E. Algonquin Road Arlington Heights, IL Toll-Free Phone Fax

Yamada America, Inc. 955 E. Algonquin Road Arlington Heights, IL Toll-Free Phone Fax Yamada America, Inc. 955 E. Algonquin Road Arlington Heights, IL 65 8 99-7867 Toll-Free 847 631-92 Phone 847 631-9273 Fax E-mail: sales@yamadapump.com Web: www.yamadapump.com The Yamada Corporation has

More information

AIR OPERATED DIAPHRAGM PUMPS

AIR OPERATED DIAPHRAGM PUMPS AIR OPERATED DIAPHRAGM PUMPS BULLETIN P-605 R JAN. 05 PUMP ANYTHING THAT CAN POUR SAFELY AND RELIABLY Wide selection of materials: SS - 36 stainless steel AL - Aluminum NSS - Conductive nylon ¼" - 2" sizes

More information