Paint feed made to measure!

Transcription

1 Extremely reliable Long service life Highly economical Pneumatic feed pumps Paint feed made to measure! Innovative and only from WAGNER:

2 Pneumatic feed pumps Powerful performance! Constant power thanks to low-icing IceBreaker air motors! JAGUAR, LEOPARD, PUMA... Throughout industry, WAGNER feed pumps ensure an optimal, reliable paint supply. They convert energy into perfect performance and provide a constant, pulsation-free flow of material even over great distances between paint room and point of application. The benefits! Particularly high delivery rates thanks to the large fluid section and powerful pneumatic motors. Extremely kind to the paint material the pumps only run when material is being taken from the piping network. The innovation! With the pneumatic piston pumps the IceBreaker air motors provide decisive advantages for practical use especially in continuous multi-shift operation. The design refinements have reduced the inevitable power losses due to icing down to a minimum. Interruptions of work due to the earlier need for thawing out are now a thing of the past! The new WAGNER IceBreaker air motor Minimal icing, thanks to new internal geometry (A) The pneumatic control valve doesn't need any lubricating oil Absolutely minimum pulsation to ensure a uniform paint feed Solidly built control housing (B) with integral silencer (C) Safety valve prevents over-pressurisation Compact integral pressure regulator unit Shut-off / air bleed valve (D), pressure regulator (E), pressure gauge (F) B E D F Pneumatic motor A C Easily maintained fluid sections reduce the down times due to maintenance and cleaning to a minimum. Stainless steel quality ensures low wear and long service life. Fluid section Filter (option) G M L K H I

3 High economy thanks to fast maintenance! In all classes, in a class of its own! 50 % faster maintenance = greater economy! Easily maintained fluid section! Can be serviced without dismantling the pump Easily cleaned separating fluid chamber (G) Packing changed quickly without special tools Compact build due to follower packings (H) Easily replaced: Large inlet (I) and outlet (K) valves for optimum material flow Stainless steel quality! All pump parts in contact with paint are made of stainless steel Tungsten carbide valve seats Hard chromed pump piston (L) Self adjusting packings (M) 15 % fewer components = less wear! Depending on the size of the plant and the area of application, WAGNER pneumatic feed pumps come in a variety of types and performance classes. The high delivery rate (volumetric flow per double stroke) runs from 130 to 1200 cc, the working pressure (maximum operating gauge pressure) from 24 to 64 bar. When choosing the right pumps many factors have to be considered. Total delivery rate Number of application points Hose length and delivery head Type of materials being applied play a very decisive role. On the following pages you will find all the feed pumps with their most important performance data. You can get further information from the Product Information sheets or have your WAGNER specialist advises you personally and individually. 3 year long term warranty! * Further convincing proof of the reliability and quality of the WAGNER piston pumps * excluding wear parts

4 JAGUAR Feed pump for large paint circulation systems, long distances and high delivery heads, high viscosities and material throughput Automotive industry and suppliers, commercial vehicle building, plastics industry, chemical and printing industry high viscosity materials release agents LEOPARD Feed pump for large paint circulation systems, medium distances, low to medium viscosities, high material throughput Automotive industry and suppliers, commercial vehicle building, plastics and chemical industry low to medium viscosity materials release agents, adhesives LEOPARD Feed pump for small and large paint circulation systems, mixing and dosing systems, medium material throughput makers and plastics industry, chemical and printing industry high viscosity materials release agents Intensification ratio 9:1 tric flow 1200 cc per double stroke oz 60 ltr/min 50 double strokes gpm 110 ltr/min gpm Max. working pressure 64 bar 928 psi 7.1 bar 103 psi Air consumption per double 80 nl stroke at 6 bar / 87 psi 2.81 cfm 83 db(a) Intensification ratio 4:1 tric 1200 cc flow per double stroke oz 60 ltr/min 50 double strokes gpm 110 ltr/min gpm Max. working pressure 30 bar 435 psi 7.7 bar 112 psi Air consumption per double 37.3 nl stroke at 6 bar / 87 psi 1.32 cfm Intensification ratio 8:1 tric 600 cc flow per double stroke oz 30 ltr/min 50 double strokes 7.9 gpm 75 ltr/min 19.8 gpm Max. working pressure 62 bar 899 psi 7.7 bar 112 psi Air consumption per double 37.3 nl stroke at 6 bar / 87 psi 1.32 cfm

5 PUMA Feed pump for small and large paint circulation systems, mixing and dosing systems, medium material throughput makers and plastics industry, chemical and printing industry low to medium viscosity materials release agents, adhesives Intensification ratio 3:1 tric 600 cc flow per double stroke oz 30 ltr/min 50 double strokes 7.9 gpm 75 ltr/min 19.8 gpm Max. working pressure 24 bar 348 psi 8 bar 116 psi Air consumption per double 16.5 nl stroke at 6 bar / 87 psi 0.58 cfm PUMA Feed pump for small paint circulation systems, automatic application systems, mixing and dosing systems, low material throughput makers and plastics industry, chemical and printing industry, general industry high viscosity materials epoxy and polyurethane lacquers, release agents Intensification ratio 8:1 tric 300 cc flow per double stroke oz 15 ltr/min 50 double strokes 3.96 gpm 50 ltr/min 13.2 gpm Max. working pressure 64 bar 928 psi 8 bar 116 psi Air consumption per double 16.5 nl stroke at 6 bar / 87 psi 0.58 cfm S Feed pump for small paint circulation systems, automatic application systems, mixing and dosing systems, low material throughput makers and plastics and chemical industry, general industry low to medium viscosity materials epoxy and polyurethane lacquers, release agents, adhesives Intensification ratio 3:1 tric 130 cc flow per double stroke 4.4 oz 6.5 ltr/min 50 double strokes 1.72 gpm 30 ltr/min 7.9 gpm Max. working pressure 24 bar 348 psi 8 bar 116 psi Air consumption per double 3 nl stroke at 6 bar / 87 psi 0.11 cfm

6 Feed pumps, accessories and more! Drum siphon with agitator and intake system Wall mount Base stand Feed pump accessories Whether it's a simple wall mount or a drum siphon with agitator, WAGNER offers an extensive range of accessories for stationary applications of feed pumps in paint feed systems. Paint supply systems We design and build complete paint feed systems, right up to pipeline systems matched to your requirements. Intellimix 3 2K FlexControl Mixing and dosing systems Intellimix 4 for automatic applications with air atomising guns or high-speed rotary atomisers, customized solutions and complex system solutions with central control Intellimix 3 for universal use for automatic and manual applications in all application variants FlexControl plus for versatile use in automatic and manual applications, almost unlimited possibilities in the incorporation of peripheral equipment, simple operation FlexControl for manual applications in all application variants. The best alternative to mechanical 2K systems with the simplest operation With these mixing and dosing units WAGNER offers a powerful family of products which ideally suit the widest range of industrial applications. PTB 03 ATEX Q019 Printed in Germany Subject to alterations GB /2005 TW