1 of 33. Brilliant Spraytec Sdn. Bhd. TwinControl Electronic mixing and dosing system. TwinControl Electronic mixing and dosing system

Transcription

1 Brilliant Spraytec Sdn. Bhd. TwinControl Electronic mixing and dosing system TwinControl Electronic mixing and dosing system Electronic 2K mixing system for AirCoat applications up to 270 bar. Including flushing pump and fully automatic flushing process. Second color can be retrofitted with extension set. More Info:- TwinControl Electronic mixing and dosing system TwinControl Electronic mixing and dosing system Electronic 2K mixing system for Airspray applications. Including flushing pump and fully automatic air-solvent flushing. Second color can be retrofitted with extension set. More Info:- 1 of 33

2 TwinControl 5-60 Electronic mixing and dosing system TwinControl 5-60 Electronic mixing and dosing system Electronic 2K mixing system for Airspray applications. Including flushing pump and fully automatic air-solvent flushing. Second color can be retrofitted with extension set. More Info:- TwinControl /35-70 Electronic mixing and dosing system TwinControl /35-70 Electronic mixing and dosing system Electronic 2K mixing system for AirCoat applications up to 270 bar. Including flushing pump and fully automatic flushing process. Second color can be retrofitted with extension set. More Info:- 2 of 33

3 TwinControl Electronic mixing and dosing system INPUT VOLTAGE (NOT ATEX) V INPUT FREQUENCY (NOT ATEX) Hz AIR INLET PRESSURE 5,0 8,0 bar, PSI AIR INLET CONNECTION I G 1 MIXING RATIO 0,1:1 10:1 MIXING ACCURACY ± 2% MATERIAL PRESSURE 530 bar, 7687 PSI VOLUME FLOW AT A 1:1 MIXING RATIO (MAX.) 18 l/min VOLUME FLOW AT A 4:1 MIXING RATIO (MAX.) 11.2 l/min VOLUME FLOW AT A 10:1 MIXING RATIO (MAX.) 9.9 l/min MATERIAL INLET I G 1 1/2 MATERIAL OUTLET A G 1/2 MAX. MATERIAL PRESSURE AT PUMP INLET 5 bar, 73 PSI MATERIAL TEMPERATURE 5-60 C, F AMBIENT TEMPERATURE 5 40 C, F MATERIAL PH 3,5 9,0 ph TwinControl Electronic mixing and dosing system Electronic 1-paint 2K mixing systems for heavy corrosion protection. Airless applications up to 530 bar, also for critical high-viscosity material. Single or multiple gun use, including flushing pump. More Info :- TwinControl INPUT VOLTAGE (NOT ATEX) V INPUT FREQUENCY (NOT ATEX) Hz AIR INLET PRESSURE 5,0 8,0 bar, PSI AIR INLET CONNECTION I G 1 MIXING RATIO 0,1:1 10:1 MIXING ACCURACY ± 2% MATERIAL PRESSURE 440 bar, 6382 PSI VOLUME FLOW AT A 1:1 MIXING RATIO (MAX.) 12 l/min VOLUME FLOW AT A 4:1 MIXING RATIO (MAX.) 7.5 l/min VOLUME FLOW AT A 10:1 MIXING RATIO (MAX.) 6.6 l/min MATERIAL INLET I G 1 1/2 MATERIAL OUTLET A G 1/2 MAX. MATERIAL PRESSURE AT PUMP INLET 5 bar, 73 PSI MATERIAL TEMPERATURE 5-60 C, F AMBIENT TEMPERATURE 5 40 C, F MATERIAL PH 3,5 9,0 ph TwinControl Electronic mixing and dosing system Electronic 1-paint 2K mixing systems for heavy corrosion protection. Airless applications up to 530 bar with single or multiple gun use, including flushing pump. More Info : of 33

4 TwinControl INPUT VOLTAGE (NOT ATEX) V INPUT FREQUENCY (NOT ATEX) Hz AIR INLET PRESSURE 5,0 8,0 bar, PSI AIR INLET CONNECTION I G 1 MIXING RATIO 0,1:1 10:1 MIXING ACCURACY ± 2% MATERIAL PRESSURE 530 bar, 7687 PSI VOLUME FLOW AT A 1:1 MIXING RATIO (MAX.) 9 l/min VOLUME FLOW AT A 4:1 MIXING RATIO (MAX.) 5.6 l/min VOLUME FLOW AT A 10:1 MIXING RATIO (MAX.) 4.9 l/min MATERIAL INLET I G 1 1/2 MATERIAL OUTLET A G 1/2 MAX. MATERIAL PRESSURE AT PUMP INLET 5 bar, 73 PSI MATERIAL TEMPERATURE 5-60 C, F AMBIENT TEMPERATURE 5 40 C, F MATERIAL PH 3,5 9,0 ph Electronic 1-paint 2K mixing systems for heavy corrosion protection. Airless applications up to 530 bar with single or multiple gun use, including flushing pump. More Info:- 2K COMFORT with two fluid circuits The 2K COMFORT is also available with two fluid circuits that can be operated in parallel. This way, two different materials can be applied simultaneously with only one unit during the cycle of objects that need to be coated. This plays an important role especially for highly reactive materials that need to be physically separated from each other to avoid unit downtimes. With the two-circuit version, each material is provided with its own fluid circuit. Simultaneous working with two fluid circuits leads to time savings Up to 50% shorter cycle time of coated objects in comparison to predecessor model FlexControl Plus Up to 15% lower investment costs compared to two one-circuit units More Info:- wagner-group.com/en/industry/products/liquid-coating/product/2k-comfortwith-two-fluid-circuits 4 of 33

5 2K Smart Mixing and dosing unit COLORS Up to 5 HARDENERS Up to 2 THIRD COMPONENT Max. 1 FLOW MEASUREMENT SYSTEM stroke sensor/ Coriolis flow meter/ Gear flow meter NUMBER OF GUNS Max. 2 with separate pot life control & separate flushing ATEX ATEX & non-atex version available Connection set up to 50 m DISPLAY 3.5 or 5.7 ADAPTIVE INJECTION SYSTEM (AIS) For B and C component COMMUNICATION Fieldbus gateway or digital I/O DATA ARCHIVING Via USB or LAN connection(in combination with data archiving software) ELECTROSTATIC CUT-OFF For up to two VM 5000 / EPG 5000 MATERIAL PRESSURE REGULATOR Manual (full pressure when flushing) or digital (flow control) REMOTE CONTROL Up to 45 m cable, usable in zone 1, with recipe change MATERIAL FILTERS Inline filters The mixing and dosing unit 2K Smart, optionally with contactless flow measurement, can be used for any application where multicolor 2K or 3K paints are processed. Replacing the mixing and dosing unit FlexControl Smart, the 2K Smart can be used to process a wide range of workpieces from all kinds of application segments. Consistent mixing ratios - you can choose the ideal flow measurement system for each material and application: Gear flow meter, Coriolis flow meter or stroke sensor (indirect flow measurement without material contact, ideal for abrasive materials) Homogeneous coating results with AIS (Adaptive Injection System) which adapts the injection of the hardener automatically to changing material flow rates High process reliability by trouble-free addition of a third component - no manual mixing effort thanks to automatic dilution and adjustment of the mixing ratio More info :- TOPFINISH Bell 1S SHAFT BEARING Air bearing MAXIMUM VOLTAGE 100 kv NOZZLE SIZES Ø 0.8 / 1.1 / 1.4 / 1.7 mm BELL DISC - SIZE 30 mm / 50 mm / 70 mm BELL DISC - SERRATION smooth, straight / cross serrated BELL DISC - MATERIAL Consistal / titanium MATERIAL VOLUME ml/min SPRAY JET DIAMETER Approx mm BEARING AIR PRESSURE 5.5 bar WEIGHT 4 kg (1 colour) VALVE DISC (NUMBER OF COLOURS) 1 / 2 / 4 DRIVE AIR PRESSURE 0-8 bar BRAKE AIR PRESSURE 0-6 bar SHROUD AIR PRESSURE bar MATERIAL PRESSURE Typically bar, max. 8 bar MATERIAL CONNECTIONS G 1/4" internal AIR CONNECTIONS 4 / 6 / 8 mm 5 of 33

6 MAX. MATERIAL TEMPERATURE +50 C AMBIENT TEMPERATURE 0 C to +40 C TEMPERATURE OF TURBINE AIR +15 C to +50 C TOPFINISH Bell 1S High-speed rotation atomiser for reciprocators & linear axes While the RobotBell can be mounted on a robot arm, the TOPFINISH Bell 1S has been specially designed for use with reciprocators and linear axes. It is ideal for electrostatic applications with water and solvent-based paints and can be applied for automated liquid coating in a wide range of industries where high-quality surfaces are required. Ideal coating results with super-fine atomisation High variability thanks to individual adjustment of the spray jet with two shroud airs depending on the workpiece geometry requirements, both a wide, soft spray pattern and a small, hard spray jet can be generated Minimum effort for assembly & maintenance thanks to sturdy turbine technology and components made from stainless steel View More at:- TOPFINISH RobotBell 1 SHAFT BEARING Air bearing ANGLE VERSION 60 MAXIMUM VOLTAGE 70 kv (type A) or 100 kv (type B) NOZZLE SIZES Ø 0.8 / 1.1 / 1.4 / 1.7 mm BELL DISC - SIZE 30 mm / 50 mm / 70 mm BELL DISC - SERRATION smooth, straight / cross serrated BELL DISC - MATERIAL Consistal / titanium MATERIAL VOLUME ml/min SPRAY JET DIAMETER Approx mm BEARING AIR PRESSURE 5.5 bar DRIVE AIR PRESSURE 0-8 bar BRAKE AIR PRESSURE 0-6 bar SHROUD AIR PRESSURE bar MATERIAL PRESSURE Typically bar, max. 8 bar MATERIAL CONNECTIONS G 1/4" internal AIR CONNECTIONS 4 / 6 / 8 mm MAX. MATERIAL TEMPERATURE +50 C AMBIENT TEMPERATURE 0 C to +40 C TEMPERATURE OF TURBINE AIR +15 C to +50 C TOPFINISH RobotBell 1 High-speed rotation atomiser for robots With the high-speed rotation atomiser TOPFINISH RobotBell 1, both small workpieces and large surfaces can be coated with highest efficiency. The RobotBell is ideal for electrostatic applications with water and solvent-based paints. Thanks to its versatility and robust properties, it allows perfect surface coatings in a wide range of areas - such as for workpieces in the automotive, metal, plastic or wood industry. Ideal coating results with super-fine atomisation High variability thanks to individual adjustment of the spray jet with two shroud airs - depending on the workpiece geometry requirements, both a wide, soft spray pattern and a small, hard spray jet can be generated Minimum effort for assembly & maintenance thanks to sturdy turbine technology and components made from stainless steel View More at:- 6 of 33

7 TwinControl / Electronic Mixing and Dosing System INPUT VOLTAGE (NOT ATEX) V INPUT FREQUENCY (NOT ATEX) Hz AIR INLET PRESSURE 5,0 8,0 bar, PSI AIR INLET CONNECTION I G 1 MIXING RATIO 0,1:1 10:1 MIXING ACCURACY ± 2% MATERIAL PRESSURE 530 bar, 7687 PSI VOLUME FLOW AT A 4:1 MIXING RATIO (MAX.) 11.2 l/min VOLUME FLOW AT A 10:1 MIXING RATIO (MAX.) 9.9 l/min MATERIAL INLET I G 1 1/2 MATERIAL OUTLET A G 1/2 MAX. MATERIAL PRESSURE AT PUMP INLET 5 bar, 73 PSI MATERIAL TEMPERATURE 5-60 C, F AMBIENT TEMPERATURE 5 40 C, F MATERIAL PH 3,5 9,0 ph TwinControl / Electronic mixing and dosing system Electronic 1-paint 2K mixing systems for heavy corrosion protection. Airless applications up to 530 bar, also for critical high-viscosity material. Single or multiple gun use, including flushing pump. View More at:- TwinControl Electronic Mixing and Dosing System INPUT VOLTAGE (NOT ATEX) V INPUT FREQUENCY (NOT ATEX) Hz AIR INLET PRESSURE 5,0 8,0 bar, PSI AIR INLET CONNECTION I G 1/2 MIXING RATIO 0,1:1 20:1 MIXING ACCURACY ± 2% MATERIAL PRESSURE 224 bar, 3249 PSI VOLUME FLOW AT A 1:1 MIXING RATIO (MAX.) 2.4 l/min VOLUME FLOW AT A 4:1 MIXING RATIO (MAX.) 1.5 l/min VOLUME FLOW AT A 10:1 MIXING RATIO (MAX.) 1.3 l/min VOLUME FLOW AT A 20:1 MIXING RATIO (MAX.) 1.2 l/min MATERIAL INLET A M 36x2 MATERIAL OUTLET A G 3/8 MAX. MATERIAL PRESSURE AT PUMP INLET 5 bar, 73 PSI MATERIAL TEMPERATURE 5-60 C, F AMBIENT TEMPERATURE 5 40 C, F MATERIAL PH 3,5 9,0 ph TwinControl Electronic mixing and dosing system Electronic 2K mixing system for AirCoat applications up to 270 bar. Including flushing pump and fully automatic flushing process. Second color can be retrofitted with extension set. View More at:- 7 of 33

8 TwinControl Electronic Mixing and Dosing System INPUT VOLTAGE (NOT ATEX) V INPUT FREQUENCY (NOT ATEX) Hz AIR INLET PRESSURE 5,0 8,0 bar, PSI AIR INLET CONNECTION I G 1/2 MIXING RATIO 0,1:1 20:1 MIXING ACCURACY ± 2% MATERIAL PRESSURE 370 bar, 5366 PSI VOLUME FLOW AT A 1:1 MIXING RATIO (MAX.) 6.6 l/min VOLUME FLOW AT A 4:1 MIXING RATIO (MAX.) 4.2 l/min VOLUME FLOW AT A 10:1 MIXING RATIO (MAX.) 3.8 l/min VOLUME FLOW AT A 20:1 MIXING RATIO (MAX.) 3.5 l/min MATERIAL INLET A M 36x2 MATERIAL OUTLET A G 3/8 MAX. MATERIAL PRESSURE AT PUMP INLET 5 bar, 73 PSI MATERIAL TEMPERATURE 5-60 C, F AMBIENT TEMPERATURE 5 40 C, F MATERIAL PH 3,5 9,0 ph TwinControl Electronic mixing and dosing system Electronic 2K mixing system for AirCoat and Airless applications up to 370 bar. Including flushing pump and fully automatic flushing. Also suited to higher viscosity Protective Coating products. Optional with second paint. View More at:- 8 of 33

9 PROTEC 2K 2K - Mixing and Dosing Unit PROTEC 2K 2K - Mixing and dosing unit The new mixing and dosing unit PROTEC 2K automatically determines the correct mixing ratio and thus guarantees the best possible coating quality. Only the exact amount of required material is mixed this saves time and material. High power even with high viscosity materials and and high layer thicknesses ideally suitable for applications in heavyduty corrosion protection. - Perfect for high solid 2-component coating material - Excellent surface quality - Extremely robust, powerful and long-lasting - Simplest operation and maintenance - Rapid amortization View More at : wagner-group.com/en/industry/products/liquid-coating/product/protec-2k Powder Coating S-Cube CleanAssist S-Cube CleanAssist Greater process stability with S-Cube CleanAssist The S-Cube CleanAssist, a compact powder coating booth with an automated cleaning process, guarantees continuous high-quality cleaning & coating results for increased production rates. The booth is available as part of a complete powder coating system. A wide range of workpieces can be coated with highest efficiency - even large objects in horizontal suspension, such as aluminum profiles or metal furniture. Considerable time savings as the effort for manual booth cleaning is minimized by up to 100% High productivity and low powder consumption due to approximately 5-6* minutes colour change time and an overspray recovery of up to 95% Continuously high coating quality thanks to fast and reliable cleaning process - reduced contamination during colour changes View More at : 9 of 33

10 Liquid Coating Electrostatic Manual Gun Airspray GM 5000EA OUTPUT VOLTAGE 80,0 kv 80,0 kv MAX. MATERIAL PRESSURE 8 bar, 116 FLUID INLET A G 1/4 MATERIAL TEMPERATURE 60 C, F MAX. AIR INLET PRESSURE 8 bar, 116 PSI COMPRESSED AIR CONNECTION A G 1/4 OPERATING TEMPERATURE 5 40 C, F WEIGHT 630 g, 1.39 lb LENGTH 261,0 mm, 10.3 in HEIGHT 245 mm, 9.6 in GM 5000EA Electrostatic manual gun Airspray for solvent-based lacquers Electrostatic manual gun for AirSpray applications with low-conductive solvent-based lacquers. With integrated high-voltage cascade. Additionally required: Control unit VM500 or VM View More at :- Liquid Coating Automatic Electrostatic Gun GA 5000 EA OUTPUT VOLTAGE 80 KV OUTPUT CURRENT 100 µa ATOMIZING PRESSURE MAX 8 bar MATERIAL PRESSURE MAX 8 bar LENGTH 268 mm WIDTH 74 mm HEIGHT 135 mm MATERIAL CONNECTION G 1/4" ATOMIZING AIR CONNECTION D10 FORMING AIR CONNECTION D8 CONTROL AIR CONNECTION D6 WEIGHT(WITHOUT PUMP) 1,2 kg OPERATING TEMPERATURE 0 C - 40 C MAX. MATERIAL TEMPERATURE 50 C Automatic Electrostatic Gun GA 5000 EA Low-pressure gun for solvent-based paints With the automatic electrostatic gun GA 5000 EA, up to 50% material and 20% coating time can be saved. Furthermore it also offers wide-ranging opportunities in terms of ideal application control in combination with the control unit EPG High application efficiency through soft spray jet High coating quality through fine atomization Even curves and inaccessible locations can be coated with high quality Short maintenance times thanks to easy assembly & disassembly Manual or automatic control via external interface View More at : tx_wproducts_product_detail%5baction%5d=detail&tx_wproducts_product_detail%5bcontroller%5d=product&chash=f0f826f64a9279b b10b79b9 10 of 33

11 Liquid Coating Airspray Automatic Gun with External Control PILOT WA 905 MATERIAL PRESSURE 8 bar, 116 PSI MAX. ATOMIZER PRESSURE 0,8 MPa, 8 bar, 116 PSI MATERIAL INLET G 1/4 CONTROL AIR CONNECTION G 1/8 ATOMIZER AIR CONNECTION G 1/4 OPERATING TEMPERATURE 80 C, F WEIGHT 660 g, 1.46 lb MAX. SOUND LEVEL 86 db(a) CONTROL TYPE External control PILOT WA 905 Airspray automatic gun with external control - For use with quick-change adapter plates. View More at : Powder Coating TOTAL Powder Coating Machine (KOREA) TOTAL TOTAL K5 Manual Powder Coating Machine General Information Place of Origin: Anyang City, Gyeongi-do Province, Korea Name: Total Powder Coating Machine Model : K5, K5M (Manual powder coating machine, Powder coating machine with cleaning pump. Substrate : Steel Weight: 42kg Technical Data: Electricial Data: I. Single Phase : 220V V II. Frequency: 50 / 60 Hz Gun Specification I. Input : 24V II. Output Voltage: Max 100Kv III. Maximum Current Output: 180Ma IV. Polarity: Negative V. Static Type: Corona Discharge 11 of 33

12 Pneumatic Data: I. Maximum input pressure: 8kg/ cm2 II. Optimum input pressure: 6kg/cm2 III. Maximum oil vapor content in compressed air: 0.1ppm IV. Maximum water vapor content in compressed air1.48/n m3 V. Maximum compressed air consumption: 13.5N m3 / h VI. Temperature range in use: -10C ~ +50C Manual gun: I. Gun legnth: 340mm II. 480g Automatic Gun: I. Gun legnth: 400mm II. Gun weight: 500g Liquid Coating Zip Eco Perfect Flow OPERATING PRESSURE 8 bar, 116 PSI VOLUMETRIC FLOW PER DOUBLE STROKE 65 cm³/ds, 3,97 in³/dh VOLUMETRIC FLOW WITH FREE DRAINAGE 28 l/min, 7.4Gpm PARTICLE SIZE 2 mm, 0.08 in AIR INLET PRESSURE 1,0 8,0 bar, PSI MATERIAL TEMPERATURE 4-90 C, F WEIGHT 7,9 kg, 17.4 lb Zip Eco Perfect Flow Low-pressure diaphragm pump Double diaphragm pump for AirSpray applications. Cost effective entry level model without material pressure regulator. Nevertheless, offers lowpulsation thanks to large material filter. For pressure up to 8 bar and one gun. View More at : tx_wproducts_product_detail%5baction%5d=detail&tx_wproducts_product_detail%5bcon Zip 80 Low-pressure diaphragm pump Double diaphragm pump for material transport and circulating systems. Up to 8 bar and 80 L/min. 12 of 33

13 EvoMotion 5-60S piston pump Low-pressure piston pump Low-pressure feed pump for Airspray applications with high-viscosity material or long hose lines. Up to 40 bar and 3.6 L/min. EvoMotion Low-pressure piston pump Low-pressure piston pump on drum suction system, without air pressure regulator and without filter antipulsation tank 13 of 33

14 EvoMotion 40-15S High-pressure piston pumps High-pressure piston pump, stainless steel, for Airless and AirCoat applications up to 320 bar and 0.9 L/min. Ideal, for example, for professional single-item lacquer stations in production and in workshops. EvoMotion 20-30S piston pump High-pressure piston pumps High-pressure piston pump, stainless steel, for Airless and AirCoat applications up to 160 bar and 1.8 L/min. Ideal, for example, for professional lacquer stations in single-item production and for workshops. 14 of 33

15 Liquid Coating High-Pressure Piston Pumps Puma PUMP RATIO 28 :1 OPERATING PRESSURE 224 bar, 3249 PSI VOLUMETRIC FLOW PER DOUBLE STROKE 40 cm³/ds, 2,44 in³/dh VOLUMETRIC FLOW PER 60 DH 2.4 l/min MAX. STROKE RATE 60 DS/min MATERIAL INLET M M 36x2 MATERIAL OUTLET M M 24x1,5 AIR INLET PRESSURE 2,5 8,0 bar, PSI SOUND LEVEL AT 6 BAR AIR PRESSURE 74 db(a) 74 db(a) MATERIAL TEMPERATURE 5-80 C, F AMBIENT TEMPERATURE 5 60 C, F MATERIAL PH ph MAX. MATERIAL PRESSURE AT PUMP INLET 20 bar, 290 PSI ALLOWABLE INCLINATION ±10 WEIGHT 16,0 kg, 35.3 lb High-Pressure Piston Pumps Puma High-pressure piston pump, stainless steel, for Airless and AirCoat applications up to 220 bar and 2.4 L/min. Ideal, for example, for professional individual lacquer stations or as a hardener pump. Visit More at :- tx_wproducts_product_detail%5baction%5d=detail&tx_wproducts_product_detail%5bcon Leopard High-pressure piston pumps High-pressure piston pump, stainless steel for Airless and AirCoat applications up to 250 bar and 4 l/min. Ideal for e.g. industrial coatings in the wood and metal industries. 15 of 33

16 Protective Coatings Pump Airless Spraypack Leopard High-pressure piston pumps High-pressure piston pump, stainless steel, for Airless applications up to 370 bar and 6.6 L/min. Ideal, for example, for industrial coating in the metals industries and for smaller protective coating applications, long hose lines. Jaguar High-pressure piston pumps High-pressure piston pump, stainless steel, for Airless applications up to 530 bar and 9 L/min. Extremely robust and ideal for heavy corrosion protection. Jaguar High-pressure piston pumps High-pressure piston pump, stainless steel, for Airless applications up to 440 bar and 12 L/min. Extremely robust and ideal for heavy corrosion protection. Other models are available upon request. ICM multicyclone booths ICM Integral Compact Multicyclone stainless steel booths are designed 16 of 33

17 for automatic powder coating and manual coating in multipaint operation. - Booth housing and treadable booth floor of stainless steel - Easy-to-clean surfaces - Robust steel frame support structure - Sturdy, indestructible construction - Variable suction capacity through modular - combination of recovery modules at 8000 m3/h and higher - Small footprint and low equipment height - Fluid container with integrated sieve, directly equipped with injectors for optimum coating quality - Attractive price ICF filter booths ICF Integral Compact Filter stainless steel filter booths are designed for automatic powder coating and manual coating. Paint changes can be undertaken by changing the powder and filter trolley. - Booth housing and treadable booth floor of stainless steel - Easy-to-clean surfaces - Robust steel frame support structure - Sturdy, indestructible construction - Variable suction capacity through modular combination of recovery modules at 8000 m3/h and higher - Small footprint and low equipment height - Fluid container with integrated sieve, directly equipped with injectors for optimum coating quality - Attractive price Plastic Booth System Plastic Booth System E-Line application solution All components in one system The E-Line solution allows the customer to provide its wide range of diverse components with a perfect surface. This highly efficient coating system guarantees high process reliability with constant results. Optimal application results guaranteed with powerful PEA-C4 automatic guns, precise EPG-S2 modules and accurate moving systems Best airflow & highest transfer efficiency by special PVC booth construction and optimized inner geometry Low investment costs: Entry level PXE powder center with excellent price-performance ratio; complete control of all components (powder center, moving devices, application, booth, filter) 17 of 33

18 in one central unit Improved recovery rate & minimized pressure loss thanks to the energy efficiency package Reduced electrical power demand of the filter unit due to improved airflow of the system SuperCube plastic booths - Fast Color Change Booth System The SuperCube allows a quick paint change without entering the booth. The PVC sandwich booth design offers an even flow distribution for the highest application efficiency during coating. - Booth housing with PVC sandwich construction - Very rapid and simple paint change, partially automated (depends on configuration) - Short booth, only 2,5 m long - Very low powder quantities in the cycle for consistently high quality coating results Manual coater located at the front or back or both - Direct access to workpiece ensures very high coating quality - Walk-in booth - Access to all locations SuperTech plastic booths The booth is a version of the SuperCube. Manual coaters can be arranged at the front or on the sides. The number of gun slots is individual. Vertical and horizontal gun arrangement is possible. - Booth housing with PVC sandwich construction - Very rapid and simple paint change, partially automated (depends on configuration) - Booth length is variable up to 7.5 m, 1-6 gun slots per side, universal arrangement options for manual coater stations - Short design - Manual coater at the front or on the sides - Optimal arrangement ensures excellent coating results - Walk-in booth - Access to all locations 18 of 33

19 Customized booths Wagner has extensive know-how in building boothes for any workpiece size. ranging from door handles to semitrailers. The particular requirements in each case call for specific gun arrangements, motion systems and process flows - Customized booths designed to meet individual customer requirements - Fulfilling customer specifications Vertical movement system VU 1 The motion technology is flexibly applicable. Whether long or short strokes, with this technology any motion sequence can be executed with precision. The horizontal sliding table allows for complex motions and thus ensures the coating of complex parts. - Flexible application - A device for both long and short stroke applications and as a positioning device Intelligent drive concept - Ensures precise and durable path measurement with an intelligent frequency converter - Stable mechanical construction Lightweight, but robust design thanks to aluminium sections and clearance free precision linear guiding and ball cages. - Maintenance-friendly drive concept - Wire-enforced toothed belt ensures a long service life Horizontal movement system The system is a precise and stable sliding table with a drive unit that, after a reference run, is able to determine and move to the exact position at any time. An ideal solution for the safe and reliable positioning of reciprocators. - Intelligent drive concept - Ensures a precise and long-life displacement measurement with an 19 of 33

20 intelligent frequency converter - Stable mechanical construction - Lightweight, but robust design thanks to aluminium sections and precision linear guiding and ball cages. - Maintenance-friendly drive concept - Wire-enforced toothed belt ensures a long service life - Low-vibration movement processes - Stable mechanical construction ensures a stable powder cloud thus ensuring optimal coating results Roller set RS 8 manual slide unit Manual slide unit for horizontally positioning the reciprocators and setting the distance of the gun to the workpiece. - Stable U profile frame - Simple, solid technology - Base plate with 4 flanged rollers - Highly durable Control unit EPG Sprint The EPG Sprint X control unit is used for all manual and automatic guns. The precise and self-regulating AFC technology with an intuitive user interface ensures optimum gun control and thus reproducible coating results. - Optimal arrangement of the operating elements - Self-explanatory and intuitive operation, short training periods - Storage and retrieval of programs with all coating parameters - Exact and reproducible settings and their precise output Gun control module EPG S2 The EPG S2 control unit is used for all guns in an automated system. 2 guns may be connected and independently remote-controlled using the central control unit. - Fully electronic control unit for reproducible product quantity settings - Storage and retrieval of programs with all coating parameters - Closed loop AFC air flow controller - Exact and reproducible settings and their precise output - Controlling 2 guns 20 of 33

21 - Space-saving construction ProfiTech M Thanks to its modular design and comprehensive functional range, the system deliver excellent coating results. The logical menu structure and the Touch and Twist operating concept ensure efficient operation. - Modular system - Simple installation and quick expansion options - Centralized system operation - Comfortable and efficient operation - Graphic interface optimized for operation - Simple and safe operation 1000 coating recipes with comprehensible logic - Quick operation with repeatable results Master Control Module MCM The MCM is the central control and operation unit of the ProfiTech M for operating all functions of the peripheral system components. The modern Touch and Twist operating concept ensures flexible operation. - Large 10.4 color touch screen with 4:3 ratio - Centralized system operation with touch and twist concept - Clear and concise menu structure - Easy and efficient operation - Special operator guidance for complex sequences. - Safe operation of the system in the right sequence, for example for paint changes Control cabinet CPS The CPS control cabinet ensures the power supply for various system components. Additionally, it serves as a signal interface to the MCM module and the peripheral components. - Central power supply for the connected components. - Only one connection point - Main components connect using plug and socket. - Easy and reliable connection - Compact design 21 of 33

22 - Space saving, does not require any specific installation site. ProfiTech S This control system is used to control customer-specific designed powder coating systems. It allows for the implementation of simple and complex control tasks to achieve maximum coating performance. - The controller consists of individual basic modules configured to meet specific customer requirements - Fulfills all customer requirements at a good price/performance ratio - Industrial control with PC or PLC operating systems - Powerful, globally available system - System operation via touchscreen - Central, simple, intuitive control of all system components - Links all control procedure equipment for powder coating with recipes, synchronized gap/height/depth control, 4D robotics and work piece sensors Maximum coating quality, efficiency, and automation Control unit CCM Prima The CCM Prima control unit is the central control and operating unit for the modular PrimaTech-CCM control unit. Eight gun control units can be connected. - Central supply for the individual modules - Easy connection - Interlock with conveyor system - No faulty coating - Emergency stop switch - Safety in the event of a malfunction Motion Control stand-alone MCS 1 The MCS can control up to 2 reciprocators VU 1 and 2 sliding tables HU 1. It is used as a standalone device and integrated in the PrimaTech CCM. - Universal use as stand-alone device or - in combination with the PrimaTech CCM application control. - Flexible application - Controlling of max. 2 reciprocators VU 1 and 2 sliding tables VU 1 22 of 33

23 - Wide range of applications - 50 movement profiles can be saved as recipes - Coating parameters are quickly available. PXE powder center The benchmark for powder supply with the best price-performance ratio The PXE solution provides complete control of all the different components in one central unit: Powder center, moving devices, application, booth & filter. The PXE powder center fulfills all requirements for the powder supply of an automatic coating system. PXE comes either as standard version or as a modular powder center version with integrated vibrating and fluidizing unit to feed directly from the powder box. Intuitive handling: The 7" all-in-one color touch display allows the whole system to be operated from one central control unit. Flexible powder feeding: Powder supply directly from the powder box or fluidized hopper, depending on customer requirements. Increased productivity: Powder supply of up to 22 guns from fluidized hopper or up to 20 guns directly from the box. PXM powder center The PXM powder center can be individually configured. A large field of application is possible thanks to feeding from box or fluid tank with up to 34 injectors, and add-on modules such as filter extraction, EPG rack, fresh powder supply and ultrasonic screen. - Different equipment packages available - Individual configuration based on specificcustomer requirements - Special components for the paint change - Rapid paint change - 7 touch screen with graphics - Easy and quick to operate 23 of 33

24 PXS powder center The benchmark for top-quality powder supply The PXS is not only the heart of the powder supply, it also represents the entire coating system as the entire system control is already integrated in the switch cabinet and is operating via the central touchscreen. The compact design enables a space-saving and ergonomic integration of the system into the individual working environment of the customer. Thanks to its diverse functions which enable a high degree of automation as well as an efficient powder application, this premium system is particularly suitable for challenging coating tasks with various demands. - Fresh powder supply directly from the powder box or a BigBag - Vibration & fluidization of the powder for ideal powder preparation - Change of collector nozzles in only five seconds - Optional ultrasound sieve reduces entry of dirt - Automatic optimization of color change processes - Integrated powder consumption documentation Tribo automatic guns Tribo automatic guns for automatic powder coating. - Processes conventional powder types and metallic powders (if suitable for Tribo) Wide range of applications - Charging body with multiple swirl stars - Optimization of frictional charge over a broad range - Tribo air for adjusting the charge - Individual tuning of each gun to the particular application and powder Powder Coating Corona Automatic Guns OUTPUT VOLTAGE 100,0 kv Corona Automatic Guns Corona automatic guns for automatic powder coating Increased transfer efficiency rate - The optimized e-static technology ensures an efficient powder charging. Smooth powder output - The gun and nozzle design of the PEA C4 gun guarantees stable coating results. Flexible application options - A wide range of powders can be applied, including metallic or UDS powder. Classification according to ignition energy class A Simple and inexpensive fire protection concept is adequate View More at : 24 of 33

25 TRIBO MANUAL GUN Tribo hand guns Tribo manual guns are designed for processing Tribo powders. They offer an excellent loading system, great ergonomics and are very light. - Very lightweight gun - Fatigue-free working over long periods - Charging body can be dismantled - Low wear part costs because high wear zones can be replaced separately - Round spray nozzle and fan spray nozzle included - Greater flexibility to master any coating task - Easy-to-replace wear parts - Low maintenance TRIBO LANCE TL Tribo lance TL Highly efficient & ergonomic coating of large workpieces without the use of expensive lifting platforms The Tribo lance TL in combination with the Sprint X manual unit enables an efficient coating of large parts as well as high film thicknesses to guarantee strong corrosion protection for individual requirements. The perfect application solution for complex construction parts with welds und recesses, like components for bridges or truck chassis. 10% more production time per day through ergonomic two-handed operation & low weight design Up to 15% less coating time & increased transfer efficiency due to flexible 3D nozzle Sprint X Labset Cup gun case set This set is a ready to use coating device. With air pressure and powder supply the device is ready to start powder coating. An ideal solution for small parts and mobile use with excellent coating results. - Compact, mobile, and always ready to use 25 of 33

26 - A compact and very organized case set for mobile use. - Perfectly balanced gun - A secure grip on the gun that is easy on the joints in every situation - Fully electronic control module - Store and query complete coating recipes - Special funnel beaker - Thanks to various inclination angles virtually any powder type flows out until completely used up Powder Coating Manual System Sprint Airfluid INPUT VOLTAGE V INPUT POWER 40 W INPUT FREQUENCY Hz PROTECTION CLASS IP 64 AIR INLET PRESSURE 0,6 0,8 MPa, 6,0 8,0 bar, PSI AIR INLET CONNECTION G 1/4 i EXHAUST AIR FLOW 0,05 20,0 Nm³/h OPERATING TEMPERATURE 5 45 C, F WEIGHT 38,0 kg, 83.8 lb Manual System Sprint Airfluid Using the Sprint AirFluid allows you to work directly out of the carton. Ideal for small batches and frequent paint changes. All parameters are set and saved via the EPG-Sprint X. In combination with the PEM-X 1, perfect surfaces are achieved. Corona manual gun with an air-flushed high-performance cascade Constant and reliable coating performance Control unit with a regulated air volume cycle A constant compressed air quantity despite fluctuations in the mains Fully electronic control unit for reproducible results Saving and accessing up to 50 coating programs Diagonal position of the powder container Powder carton is almost completely emptied View More at : tx_wproducts_product_detail%5baction%5d=detail&tx_wproducts_product_detail%5bcon Powder Coating Manual System Sprint 60 L INPUT VOLTAGE V INPUT POWER 40 W 40 W INPUT FREQUENCY Hz PROTECTION CLASS IP 64 AIR INLET PRESSURE 0,6 0,8 MPa, 6,0 8,0 bar, PSI AIR INLET CONNECTION G 1/4 i 26 of 33

27 EXHAUST AIR FLOW 0,05 20,0 Nm³/h OPERATING TEMPERATURE 5 45 C, F WEIGHT 38,0 kg, 83.8 lb Manual system Sprint 60 L Corona manual gun with an air-flushed high-performance cascade Constant and reliable coating performance Fully fluidized stainless steel container Optimal powder preparation for high quality requirements Clear and user-friendly operating interface For quickly and easily adjusting the coating parameters Up to 50 coating recipes can be saved Ideal for many color and object changes Visit More at : The Sprint 60L is used to fluidize the powder in a 60 liter stainless steel tank. All coating parameters are set and saved using the control unit EPG- Sprint X. In combination with the PEM-X 1, perfect surfaces are achieved. tx_wproducts_product_detail%5baction%5d=detail&tx_wproducts_product_detail%5bcontroller%5d=product&chash=da21abdc0c40ef3872b374094e PILOT WA 905 Airspray automatic gun with external control For use with quick-change adapter plates. PILOT WA 900 Automatic Airspray Gun Airspray automatic gun with internal control For use with quick-change adapter plates. 27 of 33

28 PILOT WA 700 Airspray automatic gun with internal control GA 250AL / GA 400AL Airless automatic gun Airless automatic gun for product pressures up to 250 bar and 400 bar. GA 4000ACIC AirCoat automatic gun AirCoat automatic guns with internal controller for the installation in automated lacquer spraying systems. Various base plates allow numerous installation options. With or without circulation. Also available in external control version GA 4000 ACEC (with or w/o circulation) Automatic electrostatic gun GA 5000 EA Low-pressure gun for solvent-based paints With the automatic electrostatic gun GA 5000 EA, up to 50% material and 20% coating time can be saved. Furthermore it also offers wide-ranging opportunities in terms of ideal application control in combination with the control unit EPG High application efficiency through soft spray jet 28 of 33

29 - High coating quality through fine atomization - Even curves and inaccessible locations can be coated with high quality - Short maintenance times thanks to easy assembly & disassembly - Manual or automatic control via external interface Also available in High Pressure version GA 5000 EAC (AirCoat); and Water based version GA 5000 EAW & GA 5000 EACW (AirCoat) TOPFINISH RobotBell 1 High-speed rotation atomiser for electrostatic applications With the high-speed rotation atomiser TOPFINISH RobotBell 1, both small workpieces and large surfaces can be coated with highest efficiency. The RobotBell is ideal for electrostatic applications with water and solvent-based paints. Thanks to its versatility and robust properties, it allows perfect surface coatings in a wide range of areas - such as for workpieces in the automotive, metal, plastic or wood industry. Ideal coating results with super-fine atomisation High variability thanks to individual adjustment of the spray jet with two shroud airs - depending on the workpiece geometry requirements, both a wide, soft spray pattern and a small, hard spray jet can be generated Minimum effort for assembly & maintenance thanks to sturdy turbine technology and components made from stainless steel ProSpray 3.34 Airless Sprayer Digital Control; High performance Brushless DC Motor for long service life; Fast change of container & easy cleaning with TILTING Cart; Quick change of Suction system. For Medium to Big project. ProSpray 3.25 Skid Airless Sprayer Digital Control ; Innovative Brushless DC Motor for long service life. Improve performance with high efficient. Easy maintenance. 29 of 33

30 ProSpray 3.21 Skid Airless Sprayer Airless Sprayer suitable for small job either for solvent paint or latex/emulsion paints. FinishControl 5000 An all-rounder for projects up to 50 m² The entry-level answer for professional coating using spray technology Universally suitable for use with varnishes, enamels and emulsion paints, thanks to a modular sprayattachment system for simple material changes Total control directly on the gun Extremely compact and practical FinishControl 3500 The hand-held XLVP device Always available: As the smallest in its class, it is available on every construction site. The practical shoulder strap makes it easy to transport. Flexible: Ideal for renovation and repair work and projects of up to 50 m². Everything included: The practical carry case provides enough space to transport the device and two filled spray attachments in an upright position. 30 of 33

31 SuperFinish 23 i High Performance injection machine suitable for PU; Epoxy & other water proofing materials. Durable and long service life; Professional leakage sealing machine compare to Drill type!!! PlastMax Spraypack Complete solution: Mixing, pumping and spraying with a single unit User-friendly and powerful: clearly arranged control panel including speed inverter and material flow rate (up to 20 l/min, depending on pump casing) and much more Easy transport and quick cleaning: the tiltable mixing chamber and the quick stator changing allow an easy cleaning. For transport the unit can be disassembled into four modules Easy to maintain and durable: self-priming water pump with stainless steel case and brass impeller Integrated compressor (250 l/min suction power): dirt resistant and oilfree compressed air for a low maintenance Plaster Spray System PlastCoat 830 MOTOR OUTPUT VOLTAGE MAX. DELIVERY MAX. DELIVERY RADIUS DELIVERY HEIGHT WEIGHT MAX. GRAIN SIZE OPERATING PRESSURE 1.8 kw 230 V / 50 Hz 12.0 l/min 30 m 20m 52kg 3mm max. 4 MPa PlastCoat 830 High-performance plaster spray system for large areas The professional solution for large areas: Powerful motor and built-in material tank Practical: Automatic stator removal for simple cleaning Extensive capabilities: Accessories such as the sack roller press complement the unit perfectly Easy to transport: Designed for simple disassembly Visit More at : tx_wproducts_product_detail%5baction%5d=detail&tx_wproducts_product_detail%5bcon HeavyCoat 970 G / E Heavy Duty Hydraulic Airless Sprayer 31 of 33

32 MAGNER Powerful, Durable & Versatile!!! Airless Sprayer for coating High viscosity materials e.g. Flame retardants; Emulsion paints; Bituminous coatings; Waterproofing materials; Airless filler etc wagner-group.com/en/contractor/product/heavycoat-970 HeavyCoat 950 G / E - Heavy Duty Hydraulic Airless Sprayer Powerful, Durable & Versatile!!! Airless Sprayer for coating High viscosity materials e.g. Flame retardants; Emulsion paints; Bituminous coatings; Waterproofing materials; Airless filler etc Liquid Coating 2K COMFORT Mixing and Dosing Unit MIXING ACCURACY +/- 1% MIXING RATIO 0.1 : 1-50 : 1 MATERIAL PRESSURE Max. 325 / 530 bar (depending on the model) FLOW RATE cc / min (depending on the measuring cell) COMPONENT A Max. 25 COMPONENT B Max. 10 COMPONENT C Max. 10 COMPONENT D Max. 10 FLUSHING FLUID A 10 FLUSHING FLUID B 5 FLUSHING FLUID C 5 FLUSHING FLUID D 5 GUNS Max. 4 MATERIAL TEMPERATURE +5 C C; +41 F F MATERIAL VISCOSITY mpas, depending on measuring cell PROCESSABLE MATERIAL Water- and solvent-based material PROCESSABLE COMPONENTS 2K, 3K and 4K DIMENSIONS (W X H X D) Wall holder: 950 x 1700 x 350 mm; rack: 980 x 2010 x 580 mm 2K COMFORT Mixing and dosing unit for multi-color applications 2K COMFORT is a new electronically controlled mixing and dosing unit for multi-color applications. Compared to the FlexControl Smart, it can process up to 25 colors and four components at the same time. For a highly efficient coating process, the unit can also be integrated into a field bus system.- Color change in less than one minute Color change in less than one minute Saves up to 90% solvent during color change Parametrization also possible with tablet PC 32 of 33

33 Best mixing results through AIS technology, patent pending The 2K COMFORT is also available with two fluid circuits which enables the simultaneous application of two different materials with only one unit. View More at : Brilliant Spraytec Sdn. Bhd. No. 1-11A1, Jalan Desa 1/5, Taman Desa Aman Puri, Kepong, 52100, Kuala Lumpur, Wilayah Persekutuan Tel Fax brilliant_spraytec@yahoo.com Website Brilliant Spraytec Sdn. Bhd. 33 of 33