Electrostatic manual and automatic guns solvent-based lacquers

Transcription

1 Electrostatic manual and automatic guns solvent-based lacquers WAGNER electrostatic manual and automatic guns for solvent-based lacquers with unique reliability, process and operating safety. Thanks to their external power supply with WAGNER control units, the guns are extremely light, robust and vibration-free. The operating concept offers flexibility and ease of use. 1. High Coating Quality, High AWG Excellent wrap-around and low overspray usage ensure not only the best coating quality, but also impressive material and time savings. Amortization is soon achieved. Electrostatic solvent 2. Robust Design Despite complex technology the guns are extremely robust and survive falls and knocks completely undamaged. 3. Ergonomics The combination of low weight, ergonomic design, outstanding balance and low trigger force is the basic building block for long, fatigue-free work. The power supply is protected and vibration-free in the control unit. 4. Easy Operation and Process Monitoring Gun monitoring and setting up to three recipes directly on the gun at the touch of a button. Here the electrostatics can be switched on an off at any time. Field strength and current flow are displayed and monitored online.

2 GM 5000EA Electrostatic manual gun Airspray Electrostatic manual gun for AirSpray applications with low-conductive solvent-based lacquers. With integrated high-voltage cascade. Additionally required: Control unit VM500 or VM 5000 Output voltage 80,0 kv Output current 100 µa Max. material pressure 8 bar, 116 Fluid inlet A G 1/4 Material temperature 60 C, F Resistance of paint > 150 kω LowR resistance of paint > 50 kω Max. air inlet pressure 8 bar, 116 PSI Compressed air connection A G 1/4 Operating temperature 5 40 C, F Weight 630 g, 1.39 lb 261,0 mm, 10.3 in. 245 mm, 9.6 in. Processable materials Included Items Ordering information Low-conductive, solvent-based lacquers, primers and separating agents, 1K and 2K. GM 5000EA (without nozzle and air cap) Operating manual Declaration of conformity Gun protection In addition to individual guns, ready-tospray sets can be composed; consisting of gun, nozzle, material hose pack and control unit. Comprehensive accessories range. Observe conductivity Electrostatic solvent GM 5000EA GM 5000EA spiral coiled tube Set GM 5000EA VC Set GM 5000EA VC Spray pack GM 5000EA - Zip52 Alu-Finish Set configurator GM 5000EA VC Service sets Service-Set GM 5000EA

3 GM 5000EA FM Electrostatic manual gun Airspray FM Electrostatic manual gun with FM certification for AirSpray applications with low-conductive solvent-based lacquers. With integrated highvoltage cascade. Also required: Control unit VM500_FM or VM5000_FM Output voltage 70,0 kv Output current 100 µa Max. material pressure 8 bar, 116 Fluid inlet A NPS 3/8 Material temperature 60 C, F Resistance of paint > 150 kω LowR resistance of paint > 50 kω Max. air inlet pressure 8 bar, 116 PSI Compressed air connection A NPS 1/4 Operating temperature 5 40 C, F Weight 630 g, 1.39 lb 261,0 mm, 10.3 in. 245 mm, 9.6 in. Electrostatic solvent Processable materials Low-conductive, solvent-based lacquers, primers, and separating agents. 1K and 2K. Included Items GM 5000EA FM (without nozzle and air cap) Operating manual Declaration of conformity Gun protection GM 5000EA - FM

4 GA 2800EA Electrostatic automatic gun Airspray Electrostatic spray gun for Airspray automatic applications with solventbased lacquers. Output voltage 80,0 kv Output current 100 µa Material resistance kω Max. material pressure 8 bar, 116 Material temperature 60 C, F Material connection Ø 10 mm, 0.4 in. Resistance of paint > 50 kω Max. air inlet pressure 8 bar, 116 PSI Operating temperature 5 40 C, F Weight 1440 g, 3.18 lb 400,0 mm, 15.7 in. Width 70 mm, 2.8 in. 141 mm, 5.6 in. Processable materials Included Items Ordering information 1K solvent-based paints 2K solvent-based paints 1K solvent-based primer 2K solvent-based primer 1K solvent-based release agents 2K solvent-based release agents GA 2800EA Universal wrench Air nozzle wrench Seal kit Hose nipple ø 10 mm; ø 0.39 in; 1/4 Hose nipple ø 10 mm; ø 0.39 in; 3/8 CE declaration of conformity User manual Determine which gun is required and the necessary cable length. Select the type of nozzle system (round spray or fan spray). Determine which control unit is required and the nozzle size. Determine which additional accessories are required, e.g. hoses, cables, etc. Electrostatic solvent Automatic gun GA2805 EA-EC Automatic gun GA2805 EA-EC short cable Automatic gun GA2800 EA-IC Automatic gun GA2800 EA-IC Service sets Service kit, GA2800 EA

5 GM 5000EAC Electrostatic manual gun Aircoat Electrostatic manual gun for AirCoat applications with low-conductive solvent-based lacquers. With integrated high-voltage cascade. Additionally required: Control unit VM500 or VM 5000 Output voltage 80,0 kv Output current 100 µa Material pressure bar, PSI material connection NPS 1/4 Material temperature 60 C, F Lacquer conductivity Lacquer conductivity LowR 4 25 Air inlet pressure 0,0 0,8 MPa, 0,0 8,0 bar, PSI Air inlet connection G 1/4 Operating temperature 5 40 C, F Weight 710 g, 1.57 lb 264,0 mm, 10.4 in. 246 mm, 9.7 in. Electrostatic solvent Processable materials Included Items Ordering information Low-conductive, solvent-based lacquers, primers and separating agents, 1K and 2K. GM 5000EAC (without nozzle and air cap) Operating manual Declaration of conformity Gun protection In addition to individual guns, ready-tospray sets can be composed; consisting of gun, nozzle, material hose pack and control unit. Comprehensive accessories range. Observe conductivity GM 5000EAC GM 5000EAC d Set GM 5000EAC VC Set GM 5000EAC VC Spray pack GM 5000EAC - Cobra Spray pack GM 5000EAC - Puma Spray pack ext. GM 5000EAC-Puma Set configurator GM 5000EAC VC Service sets Service-Set GM 5000EAC

6 GM 5000EAC FM Electrostatic manual gun Aircoat FM Electrostatic manual gun with FM certification for AirCoat applications with low-conductive solvent-based lacquers. With integrated highvoltage cascade. Also required: Control unit VM500 FM or VM5000 FM Output voltage 70,0 kv Output current 100 µa Max. material pressure 250 bar, 3626 Fluid inlet A NPS 3/8 Material temperature 60 C, F Resistance of paint > 150 kω LowR resistance of paint > 50 kω Max. air inlet pressure 8 bar, 116 PSI Compressed air connection A NPS 1/4 Operating temperature 5 40 C, F Weight 710 g, 1.57 lb 246,0 mm, 9.7 in. 246 mm, 9.7 in. Processable materials Included Items Ordering information Low-conductive, solvent-based lacquers, primers, and separating agents. 1K and 2K. GM 5000EAC FM (without nozzle and air cap) Operating manual Declaration of conformity Gun protection Select the type of nozzle system (round spray or fan spray). Determine the required nozzle size. Determine which control unit is required. Determine which additional accessories are required, e.g. hoses, cables, etc. Electrostatic solvent GM 5000EAC - FM

7 GA 2000EAC Electrostatic automatic gun AirCoat Electrostatic spray gun for AirCoat automatic applications with solventbased lacquers. Output voltage 80,0 kv Output current 100 µa Material resistance kω Max. material pressure 250 bar, 3626 Fluid inlet M16 x 1.5 Material temperature 60 C, F Resistance of paint > 150 kω Max. air inlet pressure 8 bar, 116 PSI Operating temperature 5 40 C, F Weight 600 g, 1.32 lb 400,0 mm, 15.7 in. Width 70 mm, 2.8 in. 125 mm, 4.9 in. Electrostatic solvent Processable materials Included Items Ordering information 1K solvent-based paints 1K solvent-based primer 1K high solid paints 1K high solid primer 2K solvent-based primer 2K solvent-based paints GA 2000EAC Universal wrench Nozzle wrench Seal kit, valve rod Coupling sleeve M16x1.5-NPSM1/4 Notice tag CE declaration of conformity User manual Determine the required nozzle size. Determine which control unit is required. Determine which additional accessories are required, e.g. hoses, cables, etc. Automatic spraygun GA 2000EACFB Automatic spraygun GA 2000EACR Automatic gun GA 2005EACFB Automatic gun GA 2005EACFB short cable Auto. spraygun GA2000EACR short cable Auto. spraygun GA 2000EACFB short cable Service sets Spare parts kit EACB Service kit, paint channel EAC-B Service kit, GA2000 EAC/EACW

8 VM 500 Control unit to drive the electrostatic manual guns GM 5000 and GM 5000 EAC. 80 kv with monitoring function and safety cut-off. Input voltage Gun voltage V 80 kv Gun spray current 100 µa Input power 40 W Input frequency Hz Protection class IP 54 Operating temperature 5 40 C, F Weight 2,3 kg, 5.1 lb 230,0 mm, 9.1 in. Width 180 mm, 7.1 in. 120 mm, 4.7 in. Suitable for product Included Items Ordering information GM 5000EA GM 5000EAC VM 500 Grounding cable assy. 10 m, 33 ft Declaration of conformity Operating manual Power cable 3m Select the device and the required accessories. Controler VM Electrostatic solvent 173

9 VM 500 FM FM Control unit to drive the electrostatic manual guns GM 5000EA FM and GM 5000EAC FM. 70 kv with monitoring function and safety cut-off. Input voltage Gun voltage V 70 kv Gun spray current 100 µa Input power 40 W Input frequency Hz Protection class IP 54 Operating temperature 5 40 C, F Weight 2,3 kg, 5.1 lb 230,0 mm, 9.1 in. Width 180 mm, 7.1 in. 120 mm, 4.7 in. Electrostatic solvent Suitable for product Included Items Ordering information GM 5000EA FM GM 5000EAC FM VM 500 FM Grounding cable assy. 10 m, 33 ft Declaration of conformity Operating manual Power cable 3m Select the device and the required accessories. Controler VM FM

10 VM 5000 Control unit to drive the electrostatic manual guns GM 5000 and GM 5000 EAC. Adjustable high-voltage, recipe changes, safety monitoring and many other features. Input voltage Gun voltage V 80 kv Gun spray current 100 µa Input power 40 W Input frequency Hz Protection class IP 54 Operating temperature 5 40 C, F Weight 2,3 kg, 5.1 lb 250,0 mm, 9.8 in. Width 180 mm, 7.1 in. 120 mm, 4.7 in. Suitable for product Included Items Ordering information GM 5000EA GM 5000EAC VM 5000 Grounding cable assy. 10 m, 33 ft Declaration of conformity Operating manual Power cable 3m Select the device and the required accessories. Controler VM Electrostatic solvent 175

11 VM 5000 FM FM Control unit to drive the electrostatic manual guns GM 5000EA FM and GM 5000EAC FM. Adjustable high-voltage, recipe changes, safety monitoring, and many other functions. Input voltage Gun voltage V 70 kv Gun spray current 100 µa Input power 40 W Input frequency Hz Protection class IP 54 Operating temperature 5 40 C, F Weight 2,3 kg, 5.1 lb 250,0 mm, 9.8 in. Width 180 mm, 7.1 in. 120 mm, 4.7 in. Electrostatic solvent Included Items VM 5000 Grounding cable assy. 10 m, 33 ft Declaration of conformity Operating manual Power cable 3m Ordering information Select the device and the required accessories. Controler VM FM

12 EPG 3000 EPG 3000 controls all Wagner electrostatic automatic guns for solventbased lacquers. Precision setting of the atomizer and shaping air and setting of the high voltage and current limitation are possible. Input voltage Gun voltage V 80 kv Gun spray current 100 µa Input power 40 W Input frequency Hz Protection class IP 64 Air inlet pressure 0,6 0,8 MPa, 6,0 8,0 bar, PSI Air outlet pressure 0,0 0,6 MPa, 0,0 6,0 bar, 0 87 PSI Max. number of guns 1 Operating temperature 5 40 C, F Weight 7,5 kg, 16.5 lb 315,0 mm, 12.4 in. Width 270 mm, 10.6 in. 136 mm, 5.4 in. Suitable for product Included Items Ordering information GA 2800EA GA 2805EA GA 2000EAC GA 2005EAC EPG 3000 Power cable, standard, 3 m, 9.8 ft Ground cable, 10 m, 32.8 ft Control cable, external, 3 m, 9.8 ft Spare parts kit CE declaration of conformity User manual Select the device and the required accessories. Electrostatic power generator EPG3000 ex Electrostatic solvent 177

13 Electrostatic Manual and Automatic Gun Accesories WAGNER offers a comprehensive accessories range for electrostatic manual and automatic guns. Please select the components you require from this table. Further articles can be found in the WAGNER accessories catalog. Compatible with one another GM 5000EA GM 5000EA FM GA 2805EA GM 5000EAC GM 5000EAC FM GA 2000EAC Mounting equipment Wall mount GM 5000E (left/right) Ventilspitze und Ventilsitz Valve tip Air assy Valve tip Air assy. (Steel) Valve seat Air assy. (Steel) Valve seat Air assy. (PEEK) Electrostatic solvent Filter inserts Edge filter 60 mesh Edge filter 100 mesh Edge filter 200 mesh Nozzles - flat jet Nozzle EAF mm Nozzle EAF mm Nozzle EAF mm Nozzle EAF mm Nozzle EAF mm Nozzle EAF mm Nozzle EAF mm Nozzle EAF mm Nozzle packed EA Nozzle packed EA Nozzle packed EA Nozzle EA 0.8 packed Nozzle EAF Nozzle set 1.0 EA/EAW F Nozzle set 1.2 EA/EAW F Nozzle set 1.4 EA/EAW F Nozzle set 1.6 EA/EAW F Nozzle set 1.8 EA/EAW F Nozzle set 2.0 EA/EAW F Nozzle packed EA Nozzle packed EA Nozzle set 0.8 EA/EAW F ACF 5000 (see nozzle chart) xxx - - Brillant (see nozzle chart) xxx - - Air caps - flat jet Air cap EAF S Air cap EAF S Air cap EAF S Air cap EAF W Air cap EAF W Air cap EAF W

14 Electrostatic Manual and Automatic Gun Accesories WAGNER offers a comprehensive accessories range for electrostatic manual and automatic guns. Please select the components you require from this table. Further articles can be found in the WAGNER accessories catalog. Compatible with one another GM 5000EA GM 5000EA FM GA 2805EA GM 5000EAC GM 5000EAC FM GA 2000EAC Air caps - flat jet Air cap EAF 1.2 packed Air cap EAF 1.4 packed Air cap EAF 1.6 packed Air cap EAF 1.8 packed Air cap EAF 2.0 packed Air cap EAF 0.8 packed Air cap assy. EAF Air cap ACF LV (red) Air cap ACF HV (blue) Nozzle - round jet Nozzle AR D Nozzle AR D Nozzle insert packed EA Nozzle set EAR Supra Nozzle insert R Nozzle insert R Nozzle insert R Nozzle insert R Nozzle insert R Nozzle insert R Nozzle insert R Nozzle insert R Nozzle insert R Nozzle insert R Nozzle insert R Nozzle insert R Electrostatic solvent Air cap - round spray Air cap AR D Air cap AR D Round jet nozzle adapter ACR Round jet nozzle adapter ACR 5000 (USA) Gun flush box Gun flush box (GM5000EA) Gun flush box (GM5000EAC) Control units Controler VM Controler VM Controler VM FM Controler VM FM Electrostatic power generator EPG3000 ex

15 Electrostatic Manual and Automatic Gun Accesories WAGNER offers a comprehensive accessories range for electrostatic manual and automatic guns. Please select the components you require from this table. Further articles can be found in the WAGNER accessories catalog. Compatible with one another GM 5000EA GM 5000EA FM GA 2805EA GM 5000EAC GM 5000EAC FM GA 2000EAC Electrostatic solvent Airspray hose packages Hose package GM 5000EA (7.5m) Hose package GM 5000EA (10m) Hose package GM 5000EA (15m) Hose package GM 5000 EA (20m) Hose package GM 5000EA (7,5m), Low R Hose package GM 5000EA (10m), Low R Hose package GM 5000EA (15m), Low R Hose package GM 5000EA (20m), Low R Hose package GM 5000EA USA (7.5m) Hose package GM 5000EA USA (10m) Hose package GM 5000EA USA (15m) Hose package GM 5000EA USA (20m) AirCoat hose pack Hose package GM 5000 EAC (7,5m) Hose package GM 5000 EAC (10m) Hose package GM 5000EAC (15m) hose package GM 5000EAC (20m) Hose package GM 5000EAC (7,5m), LowR Hose package GM 5000EAC (10m), Low R Hose package GM 5000EAC (15m), Low R Hose package GM 5000EAC (20m), LowR HP-hose-DN6-PN270-M16x1,5-15m-PA HP-hose-DN4-PN270-M16x m-PA Mounting accessories Suspension pin Accessories metallic application Coiled tube assy Coiled tube assy. (USA) 3/8 NPS Set material hose AC 1.5mm assy Extension and control cables Locking bracket assy Other accessories retrofit PSV to Gm5000EA/EAC round jet Paint resistivity meter RS H.V.tester HV200 N Gun cover retrofit kit PSV to Gm5000EAC flat jet

16 Control unit accessories Compatible with one another VM 500 VM 500 FM VM 5000 VM 5000 FM EPG 3000 Mounting equipment Mounting control unit assy Extension and control cables Mains cable + Stak Mains cable + Stak 200 CH Power cable assy. USA Mains cable Japan Earthing cable assy Gun cable GM 5000E 7.5m Gun cable GM 5000E 10m Gun cable GM 5000E 15m Gun cable GM 5000E 20m Gun cable GM 5000E 25m Gun cable GM 5000E 32m Gun cable GM 5000E 62m Extension cable GM 5000E 10m Extension cable GM 5000E 20m Earthing cable assy. 3m Interface cable VM Extension cable EA/EAC 7.5 m Extension cable EA/EAC 10m Extension cable EA/EAC 15m Control cable assy Electrostatic solvent 181

17 Spraypacks GM 5000 EA WAGNER offers a selection of predefined spraypacks. Please choose the spraypack most suitable for your requirements from the following table. You can also create your own individual spraypack, to do this either visit our web shop or contact your WAGNER sales partner. consists of Set GM 5000EA VC, Set GM 5000EA VC, Set GM 5000EAC VC, Set GM 5000EAC VC, Mounting equipment Mounting control unit assy Electrostatic solvent Filter inserts Edge filter 100 mesh Gun GM 5000EA GM 5000EAC Nozzles - flat jet Nozzle EAF mm nozzle ACF / Air caps - flat jet Air cap EAF W Air cap ACF LV (red) Control units Controler VM Controler VM Airspray hose packages Hose package GM 5000EA (7.5m) AirCoat hose pack Hose package GM 5000 EAC (7,5m)

18 183 Electrostatic solvent

19 Electrostatic manual guns & systems for separating agent and water-based lacquers A specialety are the new WAGNER AquaCoat systems with there isulated set-up with cabinet in different sizes. Thereby value is especially set on highest protection and security. They open up many possibilities to apply separating agents and water-based materials electrostatically. The AquaCoat systems have the same advantages as electrostatic units for solvent-based materials. The new manual guns GM 5020 for water-based materials have now also integrated high-voltage cascades. For automatic applications the GA 2800EAW, WA 900 or GA 4000 can be used. Electrostatic water-based lacquers 1. Outstanding application effect The manual guns are designed for most water-based products with a specific resistance of the spray material of between 1kΩ cm and 1MΩ cm. The guns are fitted with a special, permanently connected product hose and offer a soft and homogenous spray jet for maximum coating quality and excellent application efficiency. 2. Various AquaCoat cabinet sizes Two sizes of cabinet are available with the new generation of Aquacoat systems. The slim basic AquaCoat 5010 device is suited to areas with little available space. The wide basic AquaCoat 5020 device provides considerably more space for larger tanks, possible extensions, and increased freedom of movement in the cabinet during maintenance work. 3. Serviceability All control and operating elements of the AquaCoat system are easy to access from outside centrally on the control unit. As an option, the cabinets are available with a window for checking the level of the separating agent / paint container. 4. Highest safety standards During application, access to the interior of the system is blocked mechanically. The most important safety systems are duplicated (redundant) and thus provide optimal user protection. 5. Rapid paint changes The large door provides easy access to the paint supply and enables quick topping up or paint changes.

20 AquaCoat 5010 Manual electrostatic - water-based lacquers NEW Slim cabinet for the electrostatic processing of water-based lacquers and separating agent with manual guns. Completely insulated construction with internal charging of the materials for manual spraying applications, AirSpray and AirCoat. Basic spray sets including cabinet & control unit, pump set, and guns available, can also be customized. Output voltage 70,0 kv Output current 100 µa Total capacity 30 l, 7,93 gal(us) 560,0 mm, 22.0 in. Width 800 mm, 31.5 in mm, 57.9 in. Processable materials Included Items Ordering information Separating agents 1K water-based primer 1K water-based paints 1K water-based glues 1K water-based release agents 1K high solid primer 1K high solid paints Insulated cabinet with VM 5020W control unit Doors with window as option Mains cable Grounding cable CE Declaration of Conformity Operating manual Your authorized WAGNER partner will produce the system ready for spraying to suit the application requirement. The basic device contains the control unit. The basic set contains the control unit, a pump set ready to fit, and the GM5020 manual gun. Electrostatic water-based lacquers AquaCoat 5010 manual basic device AquaCoat 5010G manual basic device BS AQ5010 LP man. ZIP 52 GM5020EAW BS AQ5010 HP man. Evo GM5020EACW

21 AquaCoat 5020 Manual electrostatic - water-based lacquers NEW Large cabinet for the electrostatic processing of water-based lacquers and separating agent with manual guns. Completely insulated construction with internal charging of the materials for manual spraying applications, AirSpray and AirCoat. Basic spray sets including cabinet & control unit, pump set, and guns available, can also be customized. Output voltage 70,0 kv Output current 100 µa Total capacity 60 l, 15,85 gal(us) 560,0 mm, 22.0 in. Width 1000 mm, 39.4 in mm, 57.9 in. Electrostatic water-based lacquers Processable materials Included Items Ordering information Separating agents 1K water-based primer 1K water-based paints 1K water-based glues 1K water-based release agents 1K high solid primer 1K high solid paints Insulated cabinet with VM 5020W control unit Doors with window as option Mains cable Grounding cable CE Declaration of Conformity Operating manual Your authorized WAGNER partner will produce the system ready for spraying to suit the application requirement. The basic device contains the control unit. The basic set contains the control unit, a pump set ready to fit, and the GM5020 manual gun. AquaCoat 5020 manual basic device AquaCoat 5020G manual basic device BS AQ5020 LP man. ZIP 52 GM5020EAW BS AQ5020 HP man. Evo GM5020EACW BS AQ5020 HP man. Puma GM5020EACW BS AQ5020 HP man. Cobra GM5020EACW

22 GM 5020EAW Electrostatic manual gun for Airspray applications with separating agent & water-based lacquers and internal charging with integrated highvoltage cascade. Output voltage 70,0 kv Output current 100 µa Max. material pressure 8 bar, 116 Fluid inlet Special Material temperature 60 C, F Max. air inlet pressure 8 bar, 116 PSI Compressed air connection G 1/4 Operating temperature 5 40 C, F 261,0 mm, 10.3 in. 245 mm, 9.6 in. Processable materials Included Items Ordering information Release agent 1K water-based primer 1K water-based paints 2K water-based primer 2K water-based paints GM 5020EAW (with cascade without nozzle and air cap) Operating manual Declaration of conformity Gun protection Select the type of nozzle system (round spray or fan spray). Determine the required nozzle size. Determine which additional accessories are required, e.g. hoses, cables, etc. Electrostatic water-based lacquers GM 5020EAW

23 GM 5020EACW Electrostatic manual gun for AirCoat applications with separating agent & water-based lacquers and internal charging with integrated highvoltage cascade. Output voltage 70,0 kv Output current 100 µa Fluid inlet Special Material temperature 60 C, F Max. air inlet pressure 8 bar, 116 PSI Compressed air connection G 1/4 Operating temperature 5 40 C, F 261,0 mm, 10.3 in. 245 mm, 9.6 in. Electrostatic water-based lacquers Processable materials Included Items Ordering information Release agent 1K water-based lacquers 2K water-based lacquers 1K water-based primers 2K water-based primers GM 5020EACW (with cascade without nozzle and air cap) Operating manual Declaration of conformity Gun protection Select the type of nozzle system (round spray or fan spray). Determine the required nozzle size. Determine which additional accessories are required, e.g., hoses, cables, etc. GM 5020EACW

24 NEW AquaCoat 5010 Automatic electrostatic - water-based lacquers Slim cabinet for the electrostatic processing of water-based lacquers with max. two automatic guns. Completely insulated construction with internal charging of the materials for manual spraying applications, AirSpray and AirCoat. Suitable for low pressure guns (GA 2800EAW & WA 900) or high pressure guns (GA 4000) Output voltage 80,0 kv Output current 100 µa Total capacity 30 l, 7,93 gal(us) 560,0 mm, 22.0 in. Width 800 mm, 31.5 in mm, 57.9 in. Processable materials Included Items Ordering information 1K water-based primer 1K water-based paints 1K water-based glues 1K water-based release agents 1K high solid primer 1K high solid paints AquaCoat cabinet Doors with window as option Control unit, high-voltage cascade Mains cable Grounding cable CE Declaration of Conformity Operating manual Depending on the specification requirements, the system is put together ready for spraying by your authorized WAGNER partner The basic device contains cascade and control unit Electrostatic water-based lacquers AquaCoat 5010 automatic basic device AquaCoat 5010G automatic basic device

25 AquaCoat 5020 Automatic electrostatic - water-based lacquers NEW Large cabinet for the electrostatic processing of water-based lacquers with max. two automatic guns. Completely insulated construction with internal charging of the materials for manual spraying applications, AirSpray and AirCoat. Suitable for low pressure guns (GA 2800EAW & WA 900) or high pressure guns (GA 4000) Output voltage 80,0 kv Output current 100 µa Total capacity 60 l, 15,85 gal(us) 560,0 mm, 22.0 in. Width 800 mm, 31.5 in mm, 57.9 in. Electrostatic water-based lacquers Processable materials Included Items Ordering information 1K water-based primer 1K water-based paints 1K water-based glues 1K water-based release agents 1K high solid primer 1K high solid paints AquaCoat cabinet Doors with window as option Control unit, high-voltage cascade Mains cable Grounding cable CE Declaration of Conformity Operating manual Depending on the specification requirements, the system is put together ready for spraying by your authorized WAGNER partner The basic device contains control unit and cascade AquaCoat 5020 automatic basic device AquaCoat 5020G automatic basic device

26 GA 2800EAW Excellent surface quality universally applicable Electrostatic spray gun for Airspray automatic applications. Output voltage 80,0 kv Output current 100 µa Max. material pressure 8 bar, 116 Material temperature 60 C, F Material connection Ø 12 mm, 0.5 in. Max. air inlet pressure 8 bar, 116 PSI Operating temperature 5 40 C, F 400,0 mm, 15.7 in. Width 70 mm, 2.8 in. 141 mm, 5.6 in. Processable materials Included Items Ordering information 1K water-based primer 1K water-based paints GA 2800EAW User manual CE declaration of conformity For lacquer charging, an insolated construction such as AquaCoat is required. Automatic gun GA 2800EAW Electrostatic water-based lacquers 191

27 VM 5020W Control unit for Aquacoat 5010/ manual Control unit to drive the electrostatic manual guns GM 5020 EAW and GM 5020 EACW. Adjustable high voltage, recipe changes, safety monitoring, and many other functions. Input voltage Gun voltage V 70 kv Output current 100 µa Gun spray current 100 µa Input power 40 W Input frequency Hz Operating temperature 5 40 C, F Weight 6,4 kg, 14.1 lb Width 370 mm, 14.6 in. 136 mm, 5.4 in. Depth 268 mm, 10.6 in. Included Items VM 5020W Declaration of conformity Operating manual Ordering information Select the device and the required accessories. Electrostatic water-based lacquers Control unit VM 5020W

28 VM 5020WA Control unit for controlling high voltage, recipe changes, safety monitoring, and many other functions; use of automatic guns WA 700 and GA Input voltage 115 Gun voltage 80 kv Output current 100 µa Input power 40 W Weight 6,4 kg, 14.1 lb Width 370 mm, 14.6 in. 136 mm, 5.4 in. Depth 268 mm, 10.6 in. Included Items VM 5020WA Declaration of conformity Operating manual Ordering information Select the device and the required accessories. Produktvarianten Art.-Nr. Preis in PH 2 Control unit VM 5020WA Electrostatic water-based lacquers 193

29 Accessories for AquaCoat basic sets WAGNER offers a comprehensive accessories range for electrostatic manual and automatic guns. Please select the components you require from this table. Further articles can be found in the WAGNER accessories catalog. Compatible with one another AquaCoat 5010 LP manual, Zip 52, GM 5020EAW AquaCoat 5010 HP manual, EM 20-30, GM 5020EACW AquaCoat 5020 HP manual, EM 20-30, GM 5020EACW AquaCoat 5020 LP manual, Zip 52, GM 5020EAW AquaCoat 5020 HP manual, Puma 28-40, GM 5020EACW, AquaCoat 5020 HP manual, Cobra 40-10, GM 5020EACW, Electrostatic water-based lacquers Nozzles - flat jet Nozzle AF mm Nozzle EAF mm Nozzle EAF mm Nozzle EAF mm Nozzle EAF mm Nozzle EAF mm Nozzle EAF mm Nozzle EAF mm Nozzle EAF mm ACF 5000 (see nozzle chart) xxx - - Air caps - flat jet Air cap EAF S Air cap EAF S Air cap EAF S Air cap EAF W Air cap EAF W Air cap EAF W Air cap ACWF LV (red) Air cap ACWF HV (blue) Nozzle - round jet Nozzle AWR D Nozzle AWR D Nozzle insert R Nozzle insert R Nozzle insert R Nozzle insert R Nozzle insert R Nozzle insert R Nozzle insert R Nozzle insert R Nozzle insert R Nozzle insert R Nozzle insert R Nozzle insert R

30 Accessories for AquaCoat basic sets WAGNER offers a comprehensive accessories range for electrostatic manual and automatic guns. Please select the components you require from this table. Further articles can be found in the WAGNER accessories catalog. Compatible with one another AquaCoat 5010 LP manual, Zip 52, GM 5020EAW AquaCoat 5010 HP manual, EM 20-30, GM 5020EACW AquaCoat 5020 HP manual, EM 20-30, GM 5020EACW AquaCoat 5020 LP manual, Zip 52, GM 5020EAW AquaCoat 5020 HP manual, Puma 28-40, GM 5020EACW, AquaCoat 5020 HP manual, Cobra 40-10, GM 5020EACW, Air cap - round spray Air cap AR D Air cap AR D Round jet nozzle adapter ACR Gun flush box Gun flush box (GM5000EA) Gun flush box (GM5000EAC) Airspray hose packages Schlauchset GM 5000EAW (7.5m) Hose package GM 5000EAW (10m) Hose package GM 5000EAW (15m) Hose package GM 5000EAW (20m) Hose package d3 GM 5020EAW (7.5m) Hose package d3 GM 5020EAW (10m) Hose package d3 GM 5020EAW (15m) Hose package d3 GM 5020EAW (20m) AirCoat hose pack Hose package GM 5000EACW (7.5m) Hose package GM 5000EACW (10m) Hose package GM 5000EACW (15m) Hose package GM 5000EACW (20m) Electrostatic water-based lacquers Other accessories Gun holder assy Undercarriage 5010 with rollers assy Undercarriage 5020 with rollers assy Insert tray Insert tray Gun cover Level-monitoring with horn Drum cap D350 without agitator Drum cap D350 with agitator Hose attachment asm Retrofit PSV to Gm5000EA/EAC round jet Retrofit kit PSV to Gm5000EAC flat jet

31 Accessories for manual basic AquaCoat device WAGNER offers a comprehensive accessories range for electrostatic manual and automatic guns. Please select the components you require from this table. Further articles can be found in the WAGNER accessories catalog. Compatible with one another AquaCoat 5010 manual - basic unit AquaCoat 5010G manual - basic unit AquaCoat 5020 manual - basic unit AquaCoat 5020G manual - basic unit Electrostatic water-based lacquers Spray gun GM 5020EAW GM 5020EACW Pump ZIP 52 set for AquaCoat EvoMotion set for AquaCoat Cobra (Frame) set for AquaCoat Other accessories Hose attachment asm Gun holder assy Undercarriage 5010 with rollers assy Undercarriage 5020 with rollers assy Insert tray Insert tray Level-monitoring with horn Drum cap D350 with agitator Drum cap D350 without agitator

32 Accessories for automatic AquaCoat device WAGNER offers a comprehensive accessories range for electrostatic control units. Please select the components you require from this table. Further articles can be found in the WAGNER accessories catalog. Compatible with one another AquaCoat 5010 automatic - basic unit AquaCoat 5010G automatic - basic unit AquaCoat 5020 automatic - basic unit AquaCoat 5020G automatic - basic unit Spray gun GA 2800EAW Pump ZIP 52 set for AquaCoat EvoMotion set for AquaCoat Puma set for AquaCoat Cobra (Frame) set for AquaCoat Other accessories Hose attachment asm Level-monitoring with horn Drum cap D350 without agitator Undercarriage 5020 with rollers assy Gun holder assy Undercarriage 5010 with rollers assy Insert tray Insert tray Drum cap D350 with agitator Electrostatic water-based lacquers 197

33 Control unit accessories WAGNER offers a comprehensive accessories range for electrostatic control units. Please select the components you require from this table. Further articles can be found in the WAGNER accessories catalog. Compatible with one another VM 5020W VM 5020WA Electrostatic water-based lacquers Extension and control cables Mains cable + Stak Mains cable STAK m Mains cable Japan Mains cable + Stak 200 CH Power cable assy. USA Gun cable GM 5000E 7.5m Gun cable GM 5000E 10m Gun cable GM 5000E 15m Gun cable GM 5000E 20m Gun cable GM 5000E 25m Gun cable GM 5000E 32m Gun cable GM 5000E 62m Extension cable GM 5000E 10m Extension cable GM 5000E 20m Earthing cable assy Earthing cable assy. 3m

34 199 Electrostatic water-based lacquers