GRUNDFOS ALLDOS DISINFECTION. ALLDOS DISINFECTION SYSTEMS with Chlorine Dioxide 1 GRUNDFOS ALLDOS DISINFECTION

Transcription

1 GRUNDFOS ALLDOS DISINFECTION ALLDOS DISINFECTION SYSTEMS with Chlorine Dioxide 1 GRUNDFOS ALLDOS DISINFECTION

2 Content Page Oxiperm 164 D 5 to 2000 g/h for diluted chemicals Oxiperm 164 C 150 to 2500 g/h for concentrated chemicals Oxiperm 164 C 4 to 10 kg/h Technical data 1 Oxiperm 164 C/ 164 D electronics 9 Schut-off valve for bypass water extraction (by customer) 2 Connection for bypass water input Note: for operation with solenoid valve the customer has 3 Connection for the ClO 2 solution line output to the injection unit to provide a pipe disconnector (to DVGW, W624) 4 Suction line for the HCl dosing pump 10 Exhaust system for supporting rack (option) 5 Suction line for NaCLO 2 dosing pump 11 Pressure loading valves (by customers) for system back- 6 Schut-off valve (by customer) pressures < 1 bar 7 Sample extraction (by customer) 12 Inductive flowmeter 4-20 ma or contact water meter for 8 Check valve (by customer), for operation with an internal bypass proportional control of the system pump 13 Flow meter

3 Applications Chlorine dioxide disinfection systems can be used for various purposes: Drinking water The most important application area for chlorine dioxide disinfection systems is in the drinking water sector, including the disinfection of raw water as well as the final disinfection after treatment process. Process water disinfection Chlorine dioxide can also be used for disinfection of process water to ensure that microbial contamination transmission from water is minimized. Cooling water treatment By disinfecting the cooling water you remove microorganisms that can affect the system. Waste water disinfection Waste water disinfection includes disinfection of industrial waste water and municipal waste water. It protects the public from potential exposure to pathogenic microorganisms that would otherwise be present in wastewater. Food & Beverage Industry Chlorine Dioxide disinfection can be used in the Food & Beverages Industry to extend the shelf life of the products. 3 GRUNDFOS ALLDOS DISINFECTION

4 Oxiperm 164 D 5 to 2000 g/h C1 C A B M H G E F D C2 K L HCl Dimensions A B C D E F G H K L M Connections C1 und C2 Type Ø 9 DN D Ø 9 DN D Ø 9 DN D* Ø 9 DN D* Ø 9 DN D* Ø 11 DN D Ø 11 DN D Ø 11 DN D Ø 11 DN D Ø 11 DN D *) These systems are also available as front installation variants. Their designation is 164-xxxDFI System types Cl2 preparation capacity **) P max (bar) Consumption of components (in l/h*) g/h 50 Hz 60 Hz HCl continuous operation Consumption of bypass water (l/h) (input pressure < P max ) batch operation ***) 1 g/l 3 g/l Weight (kg) Type , (1 g/l) D* , D* , D , D , D , D , D D D D *) These systems are also available as front installation variants. Their designation is 164-xxxDFI **) At 60 Hz the dosing pumps perform 20% more than at 50 Hz, which increases preparation capacity and components consumption. ***) In batch operation the concentration is freely adjustable between 0,5 and 3,3 g/l Measurements in mm

5 Oxiperm 164 C 150 to 2500 g/h C1 C A B M H G E F C2 D K L HO 2 HCl Dimensions A B C D E F G H L M Connections C1 und C2 Type Ø 11 DN C Ø 11 DN C Ø 11 DN C Ø 11 DN C Ø 11 DN C System types Cl 2 preparation capacity *) P max (bar) Consumption of components in l/h*) g/h 50 Hz 60 Hz HCl dil. H 2 O continuous operation Consumption of bypass water (l/h) (input pressure < P max ) batch operation **) 1 g/l 3 g/l Weight (kg) Type ,0 5, C , C , C , C , C *) At 60 Hz the dosing pumps perform 20% more than at 50 Hz, which increases preparation capacity and components consumption. **) In batch operation the concentration is freely adjustable between 0,5 and 3,3 g/l. Above 2 g/l the system operates at full capacity. From 2 down to 0,5 g/l the system reduces the capacity continuously Measurements in mm 5 GRUNDFOS ALLDOS DISINFECTION

6 Oxiperm 164 C 4 to 10 kg/h Front view View left side B G F F D A O M L Top view View right side K N K H E C Dimensions A B C D E F G H K L M N O Connections C1 und C2 Type bypass ClO 2 HCl, exhaust injector DN 25 DN 32 DN 20 DN C DN 25 DN 32 DN 20 DN C DN 32 DN 40 DN 20 DN C DN 32 DN 40 DN 20 DN C System types ClO 2 preparation cap. *) Consumption of components *) in l/h max operating pressure 5 bar kg/h HCl bypass dilution exhaust injector Consumption of process water in l/h Weight Type total consumption **) for 3 g/l in the batch tank for 2 g/l in the batch tank C C 7, C C (kg)

7 Technical data Adjustment of the preparation capacity Protection level Admissible concentration of chemicals Admissible ambient temperature operation water temperature chemicals temperature Admissible relative air humidity Manual by menu-controlled operator prompting, automatic by input signal IP 65 electronics, dosing pumps, solenoid valve, flowmeter IP 44 bypass pump P 67 dosing controller HCl HCl 5 to 40 C 2 to 30 C 2 to 30 C max. 80% at 40 C, not condensing 9 percent by weight 7,5 percent by weight 30 percent by weight 24.5 percent by weight for diluted version for concentrated version Connection dilution water inlet PVC pipe DN 20 Connection ClO 2 solution PVC pipe DN 20 Connection for 4-10 kg/h water supply chemicals ClO 2 solution Safety equipment Material PVC pipe PVC pipe PVC pipe Parallel monitoring of capacity via dosing controller and internal Hall sensor signal for all dosing pumps Monitoring of bypass water volume via impeller type flowmeter Monitoring of capacity (water, chemicals) via MIN/MAX contacts Additional monitoring of pre-dilution (water) via impeller type flowmeter Supporting rack Mounting parts Reactor Post mixer Pipes Gaskets DN 25 or DN 32 DN 20 DN 32 or DN 40 for Oxiperm 164 D 5 to 2000 g/h for Oxiperm 164 D 4-10 kg/h PP stainless steel grey PVC, lacquered stainless steel grey PVC grey PVC FPM/PTFE Electrical and electronic data Mains voltage 110 V / 60 Hz or 230 V / 50 Hz Power consumption Analog inputs Digital inputs Analog outputs Potential-free outputs Up to 220 g/h From 350 g/h Up to 750 g/h g/h g/h 4-6 kg/h 7,5-10 kg/h approx. 300 VA approx. 650 VA approx. 550 VA approx. 900 VA approx VA approx. 400 VA approx. 500 VA 0(4) - 20 ma input or free configuration, charge 50 Ohm Contact water meter, 1 to 45 pulses/sex. for control *) MIN contact for main water Remote On/Off Error gas warning unit Preparation tank ClO 2 : overflow, MAX, MIN, dry run 0(4) - 20 ma output or free configuration, max. loop resistance 500 Ohm Error messages Pre-alert: chemicals empty Dry run ClO 2 solution tank Automatic/manual operation, max. charge 250 V, 6 A, max. 550 VA *) Note: the size of the water meter (pulses/l) has to be calculated depending on flow (1 to 45 pulses /sec.) PLC, S7 4-line plain text display Menu-controlled operator prompting Flow-scheme with LED display showing mode and error signal Versions Check valve (reactor) System backpressure less than 3 bars System backpressure more than 3 bars Options With solenoid valve, with or without exhaus system For batch operation, with or without exhaus system With internal centrifugal pump, with or with out exhaust system With external centrifugal pump, with or without exhaust system Bus system Profibus DP module Ethernet TCP/IP module Modbus (RS 232 / RS 485) Operating language Preset at the factory, changeable German, English, French, Spanish Italian 7 GRUNDFOS ALLDOS DISINFECTION

8 Being responsible is our foundation Thinking ahead makes it possible Innovation is the essence Being responsible is our foundation. We know that we have a responsibilty towards the people who are Grundfos, towards the innovation soul of Grundfos as well as towards the surrounding world. Whatever we do, we make sure that we have a firm and sustainable basis for doing it. Thinking ahead makes the innovations possible. We encourage a certain Grundfos way of thinking which is founded upon the belief that everyone must contribute by using his or her judgement and foresight. We are looking for commitment and ideas in everything we do in order to make the best solutions. We think - and we act. Innovation is the essence. It is the innovations that make Grundfos unique. We stand out because of our ability to constantly create new solutions to the ever-changing demands of the pump business. We meet every challenge and we are never afraid of taking the initiative - remainin gtrue to our ideals calls for renewal. Innovation is the soul of Grundfos.