» Fermentation and APPLICATION RANGE (PRESSURELESS) Storage Maturation Fermentation Mixing / Blending Processes
|
|
|
- Arnold Shon Elliott
- 5 years ago
- Views:
Transcription
1 » Fermentation and storage tank FS-MO When it comes to larger tanks over diameter the renowned Speidel quality is all that counts. And this is not only true for the production of tanks, but also for the planning, development and installation of large facilities. Wineries and breweries appreciate our elaborate project planning and its smooth realization. We are responsive to our customers individual needs also when it comes to larger installations. And also after the installation we are always ready to listen to you. APPLICATION RANGE (PRESSURELESS) Storage Maturation Fermentation Mixing / Blending Processes Ideal for Beer Soft drinks Alcoholic drinks
2 38 39 STANDARD EQUIPMENT FOR FERMENTATION AND STORAGE TANK FS-MO Tank shell and tank bottom made of AISI 304 stainless steel, surface IIId (2R) / IIIc (2B) Tank top made of AISI 316 stainless steel, surface IIId (2R) / IIIc (2B) Tank shell and legs marbled outside With lifting lugs and ladder safety bow Vaulted, stable tank top, with filling and vent neck located in top centre, external thread NW 50 Rd 78 x 1/6" Free-standing on welded-on box-shaped legs perfect stability and force trans mission into the tank shell SAMPLING Weld-on thread NW 10 DIN with sealing cap (for the installation of sampling tap) MANHOLE UP TO Ø MM Stable manhole neck seamlessly moulded from the tank shell 420 x 320, door with butterfly bow and hand wheel MANHOLE FROM Ø MM UPWARDS Welded stable manhole neck 340 x 440, door with swivelling handle and toggle nut RACKING OUTLET Reinforcing plate with drilled hole 48 to hold weld-on thread NW 40, NW 50 DIN FILL LEVEL Weld-on thread NW 10 DIN with sealing cap on tank including fastening points on tank shell (for the installation of fill level indicator) BOTTOM OUTLET Vaulted, stable tank bottom, in bottom centre with forward drawn discharge pipe and outlet with thread NW 50 DIN Accessories Cooling and heating Pressure tanks Tanks for mixing, transportation and storage Closed tanks Open top tanks
3 SET-UP EXAMPLE FOR FERMENTATION AND STORAGE TANK FS-MO Item Base tank FS-MO = 5,270, H ges = 5,270 () (dome) (cleaning pipe) + approx. 100 (height compensation) = 5,840 Standard equipment as on page 39 FS-MO Ventilation / Filling (page 134) Filler neck NW 400 in tank top, positioned in upright, forward direction (with welded-on bead), H = Flap lid with filler neck NW 50 external thread Rd 78 x 1/6" OB-040T Cleaning (page 148) 360 cleaning spray head perforation with clip fastener including cleaning pipe with thread NW 40 DIN 11851, H = Spray head NW 40 detachable from outside Disc valve NW 40 DIN RL-40B RL-41A Sampling (page 141) With sampling tap NW 10 DIN Racking outlet (page 137) Welded gland with thread NW 50 DIN With disc valve NW 50 DIN KA-120D Fill level (page 142) Fill level indicator NW 10 mounted FS-130K Bottom outlet (page 137) With disc valve NW 50 DIN Temperature measurement (page 144) Bi-metal dial thermometer 100, measuring range - 20 C to + 60 C Threaded sleeve with locking screw and cap nut NW 10 DIN TM-140C Heating and cooling jacket (page 100) Doppelmantel B7 12,9 m² mit Anschluss-Gewindestutzen AG G 1 für Anschluss an bauseits vorhandene Warm- / Kaltwasserquelle Ausführung 1, Layout 35, Stutzenposition B7 1B7 Stirring device (page 150) Stirring device flange mounted on the side of the tank shell DN 200 Stirring device for mixing Adjustable feet (page 146) With adjustable feet for tank legs (H = + approx. 100 ) FL-200A 46129
4 40 41 DIMENSIONS OF FERMENTATION AND STORAGE TANK FS-MO 80 Height Height FERMENTATION AND STORAGE TANK FS-MO: TANK Ø MM 7,400 8,400 9,200 10,200 11, ,800 17,500 18,500 19,500 20, Diameter 2,690 2,940 3,190 3,440 3,690 3,940 4,190 4,440 4,690 4,940 5,190 5,440 5,690 5,940 6,190 6,440 6,690 6,940 7,190 7,440 3,130 3,330 3,536 3,965 4,185 4,410 4,640 4,875 5,110 5,350 5,590 5,830 6,075 6,320 6,560 6,810 7,055 7,300 7,545 Legend = Tank height = Discharge height = Shell height = Installation height H ges = Overall height FS- MO FS- MO FS- MO FS- MO FS- MO FS- MO FS- MO FS- MO FS- MO FS- MO FS- MO FS- MO FS- MO FS- MO FS- MO FS- MO FS- MO FS- MO FS- MO FS- MO Accessories Cooling and heating Pressure tanks Tanks for mixing, transportation and storage Closed tanks Open top tanks
5 FERMENTATION AND STORAGE TANK FS-MO: TANK Ø MM 8,900 10,000 11,200 12, ,000 19,000 20,000 21, ,000 28,000 29,000 30,000 2,770 3,020 3,270 3,520 3,770 4,020 4,270 4,520 4,770 5,020 5,270 5,520 5,770 6,020 6,270 6,520 6,770 7,020 7,270 7,520 3,285 3,480 3,680 3,890 4,100 4,320 4,540 4, , 5,460 5,700 5,940 6,180 6,420 6,665 6,905 7,150 7,395 7,640 FS -MO FS -MO FS -MO FS -MO FS -MO FS -MO FS -MO FS -MO FS -MO FS -MO FS -MO FS -MO FS -MO FS -MO FS -MO FS -MO FS -MO FS -MO FS -MO FS -MO FERMENTATION AND STORAGE TANK FS-MO: TANK Ø MM 10, ,300 18,500 20,000 21, , ,000 29,000 30, ,800 37,000 38,500 39,800 2,860 3,110 3,360 3,610 3,860 4,110 4,360 4,610 4,860 5, ,110 6,360 6,610 6,860 7,110 7,360 7,610 7,860 8,110 8,360 7,000 3,480 3,670 3,865 4,070 4,280 4,490 4,710 4,930 5,150 5,375 5,610 5,845 6,080 6,320 6,560 6,800 7,040 7,290 7,530 7,775 8,020 8,265 8,510 FS- MO FS- MO FS- MO FS- MO FS- MO FS- MO FS- MO FS- MO FS- MO FS- MO FS- MO FS- MO FS- MO FS- MO FS- MO FS- MO FS- MO FS- MO FS- MO FS- MO FS- MO FS- MO FS- MO
6 42 43 FERMENTATION AND STORAGE TANK FS-MO: TANK Ø MM ,000 18,500 20, ,500 29,400 31, ,000 38,500 40, ,890 3,140 3,390 3,640 3,890 4,140 4,390 4,640 4,890 5,140 5,390 5,640 5,890 6,140 6,390 6, ,140 7,390 7,640 7,890 8,140 3,630 3,815 4,005 4,205 4,405 4,615 4,830 5,045 5,265 5,485 5,710 5,940 6,170 6,400 6,635 6,870 7,110 7,350 7,620 7,860 8,100 8,345 FS- MO FS- MO FS- MO FS- MO FS- MO FS- MO FS- MO FS- MO FS- MO FS- MO FS- MO FS- MO FS- MO FS- MO FS- MO FS- MO FS- MO FS- MO FS- MO FS- MO FS- MO FS- MO Accessories Cooling and heating Pressure tanks Tanks for mixing, transportation and storage Closed tanks Open top tanks
7 FERMENTATION AND STORAGE TANK FS-MO: TANK Ø MM 1 17,500 19,500 21, ,000 30, ,000 39,000 40, ,500 49,500 51, ,000 3,130 3,380 3,630 3,880 4,130 4,380 4,630 4,880 5,130 5,380 5,630 5,880 6,130 6,380 6,630 6,880 7,130 7,380 7,630 7,880 8,130 8,380 8,630 8,880 9,130 7,000 7,250 7,500 3,855 4,040 4,230 4,430 4,630 4,840 5,050 5,270 5,490 5,710 5,935 6,160 6, ,860 7,095 7,335 7,575 7,815 8,060 8,310 8,560 8,810 9,060 9,310 FS-MO FS-MO FS-MO FS-MO FS-MO FS-MO FS-MO FS-MO FS-MO FS-MO FS-MO FS-MO FS-MO FS-MO FS-MO FS-MO FS-MO FS-MO FS-MO FS-MO FS-MO FS-MO FS-MO FS-MO FS-MO
8 44 45 FERMENTATION AND STORAGE TANK FS-MO: TANK Ø MM 18,800 20, ,500 30, ,500 40, ,500 50, ,500 60, ,500 3,230 3,480 3,730 3,980 4,230 4,480 4,730 4,980 5,230 5, ,980 6,230 6,480 6,730 6,980 7,230 7,480 7,730 7,980 8,230 8,480 8,730 8,980 9,230 9,480 7,000 7,250 7,500 7,750 4,050 4,235 4,425 4,620 4,820 5,025 5,235 5,445 5,725 5,940 6,160 6,385 6,605 6,835 7,060 7,295 7,555 7,790 8,025 8,265 8,500 8,740 8,985 9, 9,465 9,710 FS-MO FS-MO FS-MO FS-MO FS-MO FS-MO FS-MO FS-MO FS-MO FS-MO FS-MO FS-MO FS-MO FS-MO FS-MO FS-MO FS-MO FS-MO FS-MO FS-MO FS-MO FS-MO FS-MO FS-MO FS-MO FS-MO Accessories Cooling and heating Pressure tanks Tanks for mixing, transportation and storage Closed tanks Open top tanks
9 FERMENTATION AND STORAGE TANK FS-MO: TANK Ø MM ,000 30, ,500 39, ,500 51, ,500 60, ,000 71, ,000 80, ,000 89, ,260 3,510 3,760 4,010 4,260 4,510 4,760 5,010 5,260 5,510 5,760 6,010 6,260 6,510 6,760 7,010 7,260 7,510 7,760 8,010 8,260 8,510 8,760 9,010 9,260 9,510 9,760 10,010 10,260 10,510 10,760 7,000 7,250 7,500 7,750 8,000 8,250 8,500 8,750 9,000 4,285 4,455 4,635 4,820 5,010 5,210 5,410 5,615 5,825 6,040 6,255 6,475 6,695 6,950 7,170 7,395 7,625 7,850 8,095 8,330 8,565 8,800 9,050 9,295 9,530 9,775 10,015 10,260 10,500 10,745 10,990 FS-MO FS-MO FS-MO FS-MO FS-MO FS-MO FS-MO FS-MO FS-MO FS-MO FS-MO FS-MO FS-MO FS-MO FS-MO FS-MO FS-MO FS-MO FS-MO FS-MO FS-MO FS-MO FS-MO FS-MO FS-MO FS-MO FS-MO FS-MO FS-MO FS-MO FS-MO
10 46 47 FERMENTATION AND STORAGE TANK FS-MO: TANK Ø MM 2 27,000 29, ,500 40, ,500 50, ,500 60, ,500 70, ,000 80, ,000 90, , , , , , , ,340 3,590 3,840 4,090 4,340 4,590 4,840 5,090 5,340 5,590 5,840 6,090 6,340 6,590 6,840 7,090 7,340 7,590 7,840 8,090 8,340 8,590 8,840 9,090 9,340 9,590 9,840 10,090 10,340 10,590 10,840 11,110 11,360 11,610 11,860 12,110 12,360 12,610 12,860 13,110 13,360 7,000 7,250 7,500 7,750 8,000 8,250 8,500 8,750 9,000 9,250 9,500 9,750 10,000 10,250 10,500 10,750 11,000 11,250 1 Stacking tanks sizes and prices on request Additional diameters 1,900,, on request Intermediate sizes available In case of a 10 shell height equates to = tank volume In case of a 10 shell height equates to = tank volume In case of a 10 shell height equates to = tank volume In case of a 10 shell height equates to = tank volume In case of a 10 shell height equates to = tank volume In case of a 10 shell height equates to = tank volume In case of a 10 shell height equates to = tank volume In case of a 10 shell height equates to = tank volume 4,415 4,580 4,755 4,940 5,125 5,320 5,520 5,720 5,925 6,140 6,430 6,645 6,860 7,080 7,305 7,530 7,755 7,985 8,230 8,460 8,695 8,930 9,170 9,405 9,645 9,885 10,130 10,370 10,615 10,855 11,100 11,370 11,620 11,870 12,120 12,370 12,620 12,870 13,120 13,370 13, x M36 18 x M36 FS-MO FS-MO FS-MO FS-MO FS-MO FS-MO FS-MO FS-MO FS-MO FS-MO FS-MO FS-MO FS-MO FS-MO FS-MO FS-MO FS-MO FS-MO FS-MO FS-MO FS-MO FS-MO FS-MO FS-MO FS-MO FS-MO FS-MO FS-MO FS-MO FS-MO FS-MO FS-MO FS-MO FS-MO FS-MO FS-MO FS-MO FS-MO FS-MO FS-MO FS-MO Pricing for intermediate sizes for intermediate sizes the price of the next larger size will apply (plus customization costs) Option: Tank contact parts made of AISI 316 stainless steel Surface IIId (2R), marbled outside on special request Brushed outer finish on special request Accessories Cooling and heating Pressure tanks Tanks for mixing, transportation and storage Closed tanks Open top tanks
» Fermentation and storage barrel UF
» Fermentation and storage barrel UF Our fermentation and storage barrel UF can also be called universal barrel. Its use is really multifunctional. Mostly it is used for fermentation and storage, but also
» Fermentation and storage tank base tank FS-MO stacking tank AS-MO
» Fermentation and storage tank base tank FS-MO stacking tank AS-MO The FS-MO base tank is a typical, round, upright standing fermentation and storage tank made of high quality stainless steel. Together
» Fermentation and storage barrel UF
» Fermentation and storage barrel UF Our fermentation and storage barrel UF can also be called universal barrel. Its use is really multifunctional. Mostly it is used for fermentation and storage, but also
» Fermentation and storage tank base tank FS-MO stacking tank AS-MO
» Fermentation and storage tank base tank FSMO stacking tank ASMO The FSMO base tank is a typical, round, upright standing fermentation and storage tank made of high quality stainless steel. Together with
» Red wine mash tank / variable capacity storage tank FO-M
» Red wine mash tank / variable capacity storage tank FO-M Speidel's FO-M tank is actually two tanks in one. Basically it is a typical variable capacity storage tank, but since it is equipped with long
Stainless steel tanks
Stainless steel tanks for wines and beverages Serially up to 126.000 litres capacity Tanks made with passion 2 Containers are our passion 100% CO2-free* Excellent materials and quality of surfaces. Illd
820 3, , , , , ,600 1,000 3,600 1,000 3,600 1,400 3,600 1,600 3,600 1,000 1,400 1,000 3,600 1,000 3,600
» Ventilation ACCESSORIES VENTILATION (WELDON PIECES) Tankø For dome lid For BD, FD Stainless steel vent connection AG G 1 1/2" (BSP) in lid with sealing cap Instead of drilled hole ø 38 with plastic blank
Level indicators, screw plugs
Level indicators, screw plugs 885 Product overview Level indicators, screw plugs Oil level gauges K0443 Plastic plugs K0452 Oil level gauges K0444 Page 888 Aluminium plugs K0453 Page 894 Oil level sight
Cordless angle grinder ACCUFLEX 18.0 V, 125 mm. L EC/5.0 Set
Bahnhofstraße 5 77 Steinheim Phone +49 744 828-0 Fax +49 744 25899 Cordless angle grinder ACCUFLEX 8.0 V, 25 mm L 25 8.0-EC/5.0 Set Order number 47.947 Battery voltage 8 V Battery capacity 2,5 / 5,0 Ah
Pressure degassing systems
Pressure degassing systems A degassing system consists of several components: Degassing unit Feedwater tank Instrumentation and control technology Steel structures, platforms and ladders Exhaust vapours
Dura Gas Butterfly Valve
Dura Gas Butterfly Valve Specifications Recommended use The Dura butterfly valve is a soft sealing valve for installation with flanges drilled in accordance with AS 2129 Table E. Engineered for longterm,
483 mm (19 ) Server Cabinet Unique Series. Abstract. Features. 1.5 mm strong steel sheet. Load capacity up to 1000 kg. Standard colors grey and black
483 mm (19 ) Server Cabinet Unique Series 1.5 mm strong steel sheet Load capacity up to 1000 kg Standard colors grey and black Large range of equipment available DN-19 SRV-42U-8/12 Abstract 483 mm (19
ABOUT KJN ALUMINIUM PROFILES
P R O D U C T C ATA L O G U E ABOUT KJN ALUMINIUM PROFILES Our range of Aluminum Profile is available in a large range of sizes starting with 20 x 20 through to 100 x 200 making it suitable to use in all
Dura Water Wafer Butterfly Valve
Dura Water Wafer Butterfly Valve Specifications Recommended use Features Working Pressure The Dura butterfly valve is a soft sealing valve for installation with flanges drilled in accordance with AS 2129
JUMO ecoline Ci Inductive conductivity and temperature sensor for general water engineering
Data Sheet 22943 Page 1/9 JUMO ecoline Ci Inductive conductivity and temperature sensor for general water engineering Brief description The sensor detects the electrolytic conductivity of a process liquid.
SPECIFICATIONS FOR MULTIMIXER PZ-CB-MM CONE BOTTOM, CENTER OUTLET
A B C BALDOR 28" PZ-MM-CB HP & RPM HP APPROX CAPACITY A B C SCRAPER HIGH SHIPPING SHEAR WEIGHT * 10 GAL 16 21 14 1@34 3 725 # * 25 GAL 24 29 16 2@30 5 850 # * 50 GAL 28 33 24 3@28 10 1100 # 100 GAL 38
Pneumatic Controller for Temperature. Type Pneumatic Controller for Temperature. Type Mounting and Operating Instructions EB 7065 EN
Pneumatic Controller for Temperature Type 3301 Pneumatic Controller for Temperature Type 301-1 Mounting and Operating Instructions EB 7065 EN Edition January 2014 Definition of the signal words used in
The Rittal Flex-Block base/plinth system
The Rittal Flex-Block base/plinth system 50 Save time Fast assembly by simply clipping together the base/plinth components Easily bayed with toolless baying clip The enclosure is easily transported in
2. Compartments 2 compartments with gallons front to rear with double bulkheads
January 10, 2016 STE # 11602 & 11605 (Ref. QT 3098/STE#10741-10744) ST&E SPECIFICATIONS FOR 4,000 US GALLON DOT-407 DOUBLE CONICAL STAINLESS STEEL INSULATED TWO COMPARTMENT TANDEM TRANSPORT TANK PREPARED
Stirrup-shaped handles, machine handles, apparatus handles
Stirrup-shaped handles, machine handles, apparatus handles 231 K0186 Stirrup-shaped handles GJS 400 Deburred and tumble cleaned; black plastic coated; machined contact faces. KIPP Stirrup-shaped handles
Wafer Check Valve Type 012 PVC-U
novel valve design with conical sealing surface for highest requirements and long service life body disc reinforced EPDM / FPM gaskets DN40 / d50 / 1½'' DN200 / d225 / 8'' operating pressure max. 10 bar
Welded cable ladder system
Welded cable ladder system System information Pure OBO cable ladder competence Electricians have placed their trust in OBO Bettermann cable ladders for decades. The range stretches from riveted connections,
ALWAYS follow all Webasto installation and repair instructions and observe all warnings.
Water Heater Feel the drive Thermo Top Evo Parking Heater e 00 058 Installation documentation Renault Koleos.0 Diesel from Model Year 009 Left-hand drive vehicle Automatic / manual air conditioning not
Installation Operation Maintenance
Installation Operation Maintenance www.challengervalves.com.au 1 QAD#IM1015 REVC 3.10.15 Index 1. INTRODUCTION 3 1.1 Design Features 1.2 Flange and Pipe Compatibility 3 1.3 Operating Pressures and Temperatures
DESIGN FEATURES SPECIAL DESIGN FEATURES. Space Saving. Self Priming. Easy to install. Design Flexibility
DESIGN FEATURES Space Saving Vertical arrangement saves valuable floor space. Self Prig Designed to operate with submerged impeller. Instantly serviceable. Low operation cost. Easy to install Self- contained
KEYSTONE FIGURES 310/312 K-LOK BUTTERFLY VALVES
310 - Wafer high performance butterfly valve 312 - Lugged high performance butterfly valve FEATURES GENERAL APPLICATION High performance applications such as steam, chill water, water, utility lines, gasoline,
Resistance thermometer with digital display Model TR75, battery operation
Electrical temperature measurement Resistance thermometer with digital display Model TR75, battery operation WIKA data sheet TE 60.75 Applications DiwiTherm Machine building, plant and vessel construction
26000 litre ISOTANK SPECIFICATION FOR HAZARDOUS CHEMICALS TRANSPORT AND STORAGE SPECIFICATION T11.
26000 litre ISOTANK SPECIFICATION FOR HAZARDOUS CHEMICALS TRANSPORT AND STORAGE SPECIFICATION T11. DESCRIPTION: 26 000 LITRE INSULATED UN PORTABLE TANK, TYPE T11 For transport of product classes 3, 4,
Butterfly valves. Introduction. Made of ductile cast iron
Made of ductile cast iron Introduction The portfolio of valves supplied by Keulahütte GmbH in Krauschwitz is rounded off by butterfly valves and check valves, which have been designed according to international
FK DN PVC-U Butterfly valve
.co.th FK DN 40 300 PVC-U Butterfly valve FK DN 40 300 The FK is a butterfly valve for shutting off or regulating flow, with structural characteristics that make it ideal for industrial applications requiring
SMOOTHWALL BINS SMOOTHWALL BINS WESTERN. meridianmfg.com
SMOOTHWALL BINS SMOOTHWALL BINS WESTERN meridianmfg.com Meridian sets the standard of excellence in the storage and handling industry. We continuously incorporate the latest technological innovations to
Cordless rotary hammer drill 18,0 V CHE 18.0-EC
Bahnhofstraße 5 77 Steinheim Phone +49 744 828-0 Fax +49 744 25899 Cordless rotary hammer drill 8,0 V CHE 8.0-EC Order number 430.005 Battery voltage 8 V Battery capacity 2,5 / 5,0 Ah No load speed 0-400
Befestigungssysteme Klimatechnisches Zubehör. Fixing systems
Befestigungssysteme Klimatechnisches Zubehör Fixing systems With us, insulation work becomes enjoyable For almost three decades, we have been a leading enterprise in innovative systems for technical insulation
The HiLok high performance butterfly valves offer efficient, bi-directional sealing across a wide spectrum of service conditions.
The HiLok high performance butterfly valves offer efficient, bi-directional sealing across a wide spectrum of service conditions. Features Cast on ISO top plate. Long neck length according HeizAnlV. External
SECTION METAL LOCKERS. A. ADAAG Americans with Disabilities Act, Accessibility Guidelines.
SECTION 10 51 13 METAL LOCKERS PART 1 GENERAL 1.01 SECTION INCLUDES A. Heavy Duty Welded Gear Lockers. B. Locker benches. 1.02 REFERENCES A. ADAAG Americans with Disabilities Act, Accessibility Guidelines.
Keystone Figures 310/312 K-LOK Butterfly Valves
310 - Wafer high performance butterfly valve 312 - Lugged high performance butterfly valve Features General Application High performance applications such as steam, chill water, water, utility lines, gasoline,
Manufacturer of Industrial Valves a n d R e l e v a n t E q u i p m e n t. Tilting Disk Check Valves with Counter Weight.
Manufacturer of Industrial Valves a n d R e l e v a n t E q u i p m e n t Tilting Disk Check Valves www.mirabvalves.com TiltingDisc Check Valves Size: DN 100 1 mm Pressure: PN 10 40 bar Face to face:
Part-No. Article / Version Supply A Tilt foot bar of ABS, off-white RAL 9002 A
*Mounting angle ( ) on the adapter serves as a support to locate the case in the right position. After attachment of the adapter, the mounting angles can be easily removed. Tilt foot bar, Case feet TILT
XL Distribution enclosures WORKSHOP SPECIFICATIONS
800 Distribution enclosures WORKSHOP SPECIFICATIONS With its extensive ranges, the Legrand offer meets your quality standards and provides real freedom and simplicity of installation together with acknowledged
* * Data sheet DA A (ATEX) Differential pressure measuring device for potentially explosive areas
09015062 DB_EN_DA10_ATEX Rev. ST4-A 03/18 *09015062* Data sheet DA10... 0A (ATEX) Differential pressure measuring device for potentially explosive areas Gas explosion protection Zone 1 and 2, gases and
Vessels and Distillation Equipment
Vessels and Distillation Equipment 147 A suitable solution for practically every application in well-known BOLA-quality and optimally adapted to your needs. PRODUCT TIPS BOLA Scrubber Columns Pressure:
R O L L C O O L I N G F L A T J E T N O Z Z L E
6 S R I S R O L L C O O L I N G F L A T J T N O Z Z L NW! Patent Pending The correct alignment of the roll cooling nozzles on the spray header is essential for optimal roll cooling. Flat jets are the preferred
FUEL STATION FOR INTERNAL USE KA
STATIONARY FUEL SYSTEMS FOR DIESEL RIETBERG CONTAINERS 07 FUEL STATION FOR INTERNAL USE KA [DIESEL] Their benefits Manufactured according to DIN 66/DIN 666 with German approval for storage of diesel/fuel
Series 240 Type and Type Pneumatic Control Valves Type 3347 Hygienic Angle Valve
Series 240 Type 3347-1 and Type 3347-7 Pneumatic Control Valves Type 3347 Hygienic Angle Valve Application Control valve for hygienic applications in the food and pharmaceutical industries Valve size DN
Cast-Iron Valves G101 DI BUTTERFLY VALVE LEVER... 2 G401 CI GLOBE VALVE CL G403 CI GLOBE VALVE PN G103 DI BUTTERFLY VALVE GEAR...
Cast-Iron Valves PAGE G101 DI BUTTERFLY VALVE LEVER.... 2 PAGE G401 CI GLOBE VALVE CL125.... 9 G103 DI BUTTERFLY VALVE GEAR.... 3 G403 CI GLOBE VALVE PN16.... 10 G201 CI Y STRAINER CL125.... 4 G501 CI
Standard. Manual Shopfitting and Storage Systems
Standard Manual Shopfitting and Storage Systems List of abbreviations used General abbreviations: P Pair RL Round holes SB Self-service SL Combined round and key holes V Packaging unit Dimensions and units:
Dual Plate Check Valves
ORION STEEL VALVES Dual Plate Check Valves API 594 DUAL PLATE DUAL PLATE WAFER CHECK VALVES API 594 - p. 84 Class ASME 150 (PN 20) 300 (PN 50) 600 (PN 100) 900 (PN 150) 1500 (PN 250) 2500 (PN 420) DUAL
SECTION H3 TRAYMASTER SERIES DEAERATORS
SECTION H3 TRAYMASTER SERIES DEAERATORS SAMPLE SPECIFICATIONS PART 1 GENERAL... H3-12 1.1 Packaged Deaerator Specification... H3-12 PART 2 PRODUCTS... H3-12 2.1 Deaerator... H3-12 2.2 Deaerator Vessel...
SILOXA frame-mounted gas drying system, GK model, set up for outdoor installation
Technical Datasheet 1/5 Condensate trap Moulded piece, material No. 1.4571, for fl ange-mounting on gas cooler DN 150-400 Demister, material No. 1.4571 Condensate outlet via liquid shut-off valve Monitoring
Mercedes Benz GLK 200 / 220 / 250 CDI (X204)
Water Heater Feel the drive Thermo Top Evo 5+ Parking Heater e 00 058 Installation documentation Mercedes Benz GLK 00 / 0 / 50 CDI (X04) Diesel from model year 009 Left-hand drive vehicle Automatic air-conditioning
SMOOTHWALL BINS WESTERN
SMOOTHWALL BINS WESTERN SMOOTHWALL BINS WESTERN Since launching our first product 65 years ago, Meridian has set the standard in excellence for the storage and handling industry. Meridian has continuously
SECTION H STEERING. Section Description Page No. H.1 GENERAL DESCRIPTION 3 H.2 STEERING WHEEL 3 H.3 INNER COLUMN 5 H.
SECTION H STEERING Section Description Page No. H.1 GENERAL DESCRIPTION 3 H.2 STEERING WHEEL 3 H.3 INNER COLUMN 5 H.4 OUTER COLUMN 5 H.5 STEERING UNIT LOCK STOPS 6 H.6 STEERING UNIT 6 H.7 STEERING ARMS
Introduction Advantages of cooperating with Our service - our conditions Our standard central control valve
Introduction Advantages of cooperating with Our service - our conditions Our standard central control valve Gravel-Filter Deferrisation Systems Pressure filter EKF, made of stainless steel (V4A) Pressureless
Si 6303 / Si 6304 / Si 6305
Si 6303 / Si 6304 / Si 6305 Engineering GREAT Solutions Process and steam safety valves to PED and DIN/EN standards Si 6303 / Si 6304 / Si 6305 Si 6303 / Si 6304 / Si 6305 Features Engineered for high
Hi-Tech specially designed components allow for fast and easy assembly.
OPEN SHELVING MEDIUM, HEAVY AND EXTRA HEAVY-DUTY HI-TECH STEEL SHELVING Open Starter Units Include: Two beaded front posts, two angle back posts, one pair of back sway braces, two pair of side sway braces
DATA SHEET 1 : 1 CABLE TRAY WITH LOCK. Type No. A 1 A1 1 A2 A3 B 2 B1 2 C D E F
DATA SHEET 1 : 1 CABLE TRAY WITH LOCK SILTEC cable tray with locking is a new, patented tray, in which you can sew wires and tubing in and out, without using tools and clips for fastening. This tray is
4 pole insulated conductor rails UNILIFT-ULA 35A, 50A, 80A, 100A
2 Table of contents General information... 4 Elements of the conductor rail supply line... 4 Innovative connection method... 5 Technical properties... 6 Construction of the line section... 6 Line section...
Flexible Silo. ACHBERG. flexible silo
26 27 Flexible Silo 28 29 flexible indoor silo SFEX flexible indoor silo SFEX - for installation on a flat floor in the hall - delivered in single parts with anchor bolts - steel construction RA9005 (jet
Fan coil unit NBS 100/150
Fan coil unit /150 Ferdinand Schad KG Steigstraße 25-27 D-78600 Kolbingen Telephone +49 (0) 74 63-980 - 0 Fax +49 (0) 74 63-980 - 200 info@schako.de www.schako.de Contents Description...3 Advantages...3
Table of Contents. EIGERFLEX -Clima. 2.0 Table of Contents
2.0 Table of Contents 2.0 Table of Contents 2.1 System description 2.100 System description (general) 2.105 System description (data) 2.115 -Clima range, DN 20 - DN 125 / SDR 11 (coils) 2.120 -Clima range,
PS42 - Plasma Swivel Manual Wall Mount
SHEET 1 of 9 DESIGN HIGHLIGHTS Effortless, one handed operation; even with heavy screens Bracket allows perfect parallel tracking before screen is rotated FUNCTION A manual wall bracket that allows simple
COOLING SYSTEM - V8. Cooling system component layout DESCRIPTION AND OPERATION
Cooling system component layout 26-2-2 DESCRIPTION AND OPERATION 1 Heater matrix 2 Heater return hose 3 Heater inlet hose 4 Heater inlet pipe 5 Throttle housing 6 Connecting hose 7 Throttle housing inlet
Moisture-proof cable branch boxes Ceiling distribution boxes Lamp suspension boxes Wall boxes Concrete wall boxes and accessories
Branch and lustre terminals Apparatus and light terminals Porcelain terminals Screwless terminals Flat plug terminals Flat plug branch terminals Mains branch terminals Connection terminals Earthed wire
TECHNICAL INSTRUCTIONS FOR AFTER SALES ULTRA GAS DEEP FAT FRYER
TECHNICAL INSTRUCTIONS FOR AFTER SALES ULTRA GAS DEEP FAT FRYER ULTRA GAS DEEP FAT FRYER 1. ELECTRIC DIAGRAMS...3 1.1 DEEP FAT FRYER...3 1.2 BATTERY FILTERING (OPTIONAL)...4 2. GAS DIAGRAM...6 2.1 BURNER...6
TECHNICAL INSTRUCTIONS FOR AFTER SALES ULTRA ELECTRIC DEEP FAT FRYER
TECHNICAL INSTRUCTIONS FOR AFTER SALES ULTRA ELECTRIC DEEP FAT FRYER ULTRA ELECTRIC DEEP FAT FRYER 1. ELECTRIC DIAGRAMS...3 1.1 FR15 FRYERS...3 1.2 FR25 FRYERS...7 1.3 OPTIONAL BATTERY FILTERING FR25...9
SMOOTHWALL BINS EASTERN
SMOOTHWALL BINS EASTERN SMOOTHWALL BINS EASTERN Since launching our first product 65 years ago, Meridian has set the standard in excellence for the storage and handling industry. Meridian has continuously
Submersible Borehole Pump. UPAchrom. 4", UPAchrom 100 CC + DN 100. Type Series Booklet
Submersible Borehole Pump UPAchrom 4", UPAchrom 1 CC + DN 1 Type Series Booklet Legal information/copyright Type Series Booklet UPAchrom All rights reserved. The contents provided herein must neither be
PSI Compakt-Seals. Pipeline Accessories. Compakt-Standard Compakt-Special Compakt-Varia. General Information. Selection Guide. Order Submittal Sheet
2 General Information Selection Guide Order Submittal Sheet Installation Instruction PSI Compakt-Seals Compakt-Standard Compakt-Special Compakt-Varia Pipeline Accessories 21 General Information The Sealing
RUBBER SLEEVE KNIFE GATE VALVE
RUBBER SLEEVE KNIFE GATE VALVE The model knife gate is a bi-directional wafer valve equipped with two metallic coved rubber sleeves designed for use in the handling of abrasive slurries, mainly in industries
Heavy-Duty Suspension System CS-2000 System 80
Heavy-Duty Suspension System CS-2000 System 80 With its large number of components, the BERNSTEIN CS-2000 System 80 suspension system offers technically perfected solutions for a wide range of applications.
process systems returnable container systems right from the start English
process systems returnable container systems right from the start www.processsystems.com English The WALDNER Group a strong trio The WALDNER Corporate Group consists of three companies: Hermann WALDNER
Volkswagen New Beetle 2.0 Liter 4-cyl General, Engine (Engine Code AEG) 13 Engine-Crankshaft, Cylinder block (Page GR-13)
13 Engine-Crankshaft, Cylinder block (Page GR-13) Engine, disassembly and assembly 10-222 A/21 guide from 10-222 A support tool, modifying Ribbed belt, removing and installing Semi-automatic toothed belt
D10 Page. Contents. Complete Equipment with Scope of Supplies 2. Accessories 3
01.2009 UK D10 1 D10 Page Contents Complete Equipment with Scope of Supplies 2 Accessories 3 Spare Parts D10-III 230V / 400V 4-5 Motors D10 universal 6 Transport shaft, mixing shaft 7 Electric Control
Special Alloy Ball Valves
www.swagelok.com Special Alloy Ball Valves 60 Series 3/8 to 1 in. sizes Alloy 625, alloy 825, alloy 2507 super duplex stainless steel, and 6-moly materials On-off (2-way) valves Compensating seat design
Rectangular Valve Type RA
Rectangular Valve Type 2 Technical Description Rectangular Valve Type with flanges drilled according to DIN 24193 T3 and pneumatic cylinder Exploded view of a standard with a swing through steel disk and
ALC-3 BUTTERFLY VALVES NOMINAL PRESSURE NOMINAL SIZE MATERIALS CONNECTIONS DESIGN. ANSI Class PN DN
BUTTERFLY VALVES ALC-3 NOMINAL PRESSURE ANSI Class 150-600 PN 10-100 NOMINAL 2-80 DN 50-2000 MATERIALS Cast Iron Carbon Steel Low Alloy Steel CONNECTIONS Wafer Lugged Flanged Butt Weld DESIGN Eccentric
Rod thermostat with micro switch
Data sheet 60.1530 Page 1/6 Rod thermostat with micro switch STMA type series Particularities with micro switch Aluminum die cast case Protection class IP 54 high over-temperature security high response
Doors and fittings. Doors and fittings Aluminum Framing Hinge profile (p. 8-3) Hinge (p. 8-4) Hinge, plastic (p. 8-5)
Doors and fittings Aluminum Framing.0-1 Doors and fittings 1 4 Hinge profile (p. -) Hinge (p. -4) Hinge, plastic (p. -) Hinge, aluminum (p. -) 1 LIFTOFF hinge (p. -) Hinge, removable (p. -) Hinge, adjustable
PS42 - Plasma Swivel Manual Wall Mount Technical Sheet
DESIGN HIGHLIGHTS Effortless, one handed operation; even with heavy screens Bracket allows perfect parallel tracking before screen is rotated Bi-directional swivel motion up to 60 Strong steel construction
DeZURIK BOS-US 2-20" (50-500mm) UNINTERRUPTED SEAT RESILIENT SEATED BUTTERFLY VALVES TECHNICAL SPECIFICATIONS
BULLETIN 46.00-2B OCTOBER 2015 DeZURIK BOS-US 2-20" (50-500mm) UNINTERRUPTED SEAT RESILIENT SEATED BUTTERFLY VALVES TECHNICAL SPECIFICATIONS - Materials of Construction - Specifications - Ordering - Dimensions
Detroit Speed, Inc Mustang Mini-Tubs P/N:
Detroit Speed, Inc. 1964.5-1970 Mustang Mini-Tubs P/N: 040405 Item Component Quantity 1 DSE Mini-Tubs - Mustang 2 2 Frame Rail Sections 2 3 Doubler Plate 4" x 3.25" 4 4 Doubler Plate 4" x 2" 4 5 Installation
standard design options sight glass weld pad type optional features
standard design wetted material: ASTM SA-240 316LSS; non-wetted: 304SS with studs and hex nuts with non asbestos gaskets with tempered borosilicate glass sight glass weld pad type options materials: HC-276,
High Flow Safety Valves
High Flow Safety Valves Engineering GREAT Solutions Process and steam safety valves to PED and DIN/EN standards High Flow Safety Valves Valve summary Si 6301 Size DN 20 to DN 150 Set Pressure up to16 bar
BOHLENDER GmbH Phone: +49(0)9346 / Fax: +49(0)9346 / Internet:
Internet: www.bola.de E-Mail: info@bola.de BOLA-Flat Flange Distillation Apparatuses made of Fluoroplastic () with SAFE LAB-System 5 9 Suitable for the distillation of strong alkaline or acid products
KARL SCHNELL GRINDER SPECIFICATION: KS Process Automat B 22 Type l
KARL SCHNELL GRINDER SPECIFICATION: KS Process Automat B 22 Type 250 300l Execution - total volume mixer bowl approx. 380 l, nominal volume approx. 300 l - stationary design, with four height adjustable
Mitraset 19 Housings. Housing for electronic instruments
Housing for electronic instruments Mitraset 19 housings are in accordance with MIL-T 28800, MIL-STD 810 F, EIA and IEEE Standards and are designed to accommodate electronic devices in a 19 rack. They also
Praher S4 Ball Valve. manual valves. Materials. Sizes. Pressure Rating. Features. Connections. Valve Dimensions. Actuation.
Praher S4 Ball Valve Lockable Handle Tagging Point Valve Bracket Actuation Materials Body - PVDF Ball Seat - PTFE Seals - FPM Sizes 3/8-4 /16mm - 110mm Features Lockable Handle (Lock not supplied) True
Praher S4 Ball Valve. manual valves. Materials. Sizes. Pressure Rating. Features. Connections. Valve Dimensions. Actuation.
Praher S4 Ball Valve Lockable Handle Tagging Point Valve Bracket Actuation Materials Body - PVDF Ball Seat - PTFE Seals - FPM Sizes 3/8" - 4"/16mm - 110mm Features Lockable Handle (Lock not supplied) True
ALWAYS follow all Webasto installation and repair instructions and observe all warnings.
Water Heater Feel the drive Thermo Top E Parking Heater Thermo Top C Parking Heater e 00 000 e 00 000 Installation documentation Skoda Yeti Diesel - CR from model year 00 Left-hand drive vehicle Climatronic
Resistance thermometer with digital indicator Model TR75, battery operation
Electrical temperature measurement Resistance thermometer with digital indicator Model TR75, battery operation WIKA data sheet TE 60.75 Applications DiwiTherm Machine building, plant and vessel construction
Dial thermometers. Gas filled system and Bi-metal. dial thermometers
JJ Dial thermometers JJ Diesel engine thermometers JJ Low temperature dial thermometers JJ Remote reading dial thermometers JJ Remote reading diesel engine thermometers JJ Remote reading low temperature
Code 0 Description Pic Link # Used Diameter Thread Pitch Length Washer 1 Washer2 Nut size Class Notes F Alternator bracket mounting bolts
Code 0 Description Pic Link # Used Diameter Thread Pitch Length Washer 1 Washer2 Nut size Class Notes 1 15 1 2F Alternator bracket mounting bolts (Engine Lift Hook) 3 10 1.25 30 split washer flat 4 14mm
R O L L C O O L I N G F L A T J E T N O Z Z L E
6 S R I S R O L L C O O L I N G F L A T J T N O Z Z L NW! Patent Pending The correct alignment of the roll cooling nozzles on the spray header is essential for optimal roll cooling. Flat jets are the preferred
JUMO ecoline Ci Inductive conductivity and temperature sensor for general water engineering
Data Sheet 22943 Page 1/9 JUMO ecoline Ci Inductive conductivity and temperature sensor for general water engineering Brief description The sensor detects the electrolytic conductivity of a process liquid.
Swing - Out Ball Valves. High Technology Valve & Fitting Series
Swing - Out Ball Valves High Technology Valve & Fitting SWB 30 SERIES SPECIFICATION Pressure Rating up to 000 psig (9 bar) at 00 (37 ) Temperature Range from -0 (- ) to 50 (3 ) TESTING Each valve is tested
CAPTIS. The modular and flexible system for internal and external clamping
NEW CAPTIS Clamping system The modular and flexible system for internal and external clamping CAPTIS Clamping SYSTEM The new, modularly designed CAPTIS clamping system is very impressive with its high
M-5000TG/5700TG Steam and Cold Water Mixing Unit
M-5000TG/5700TG Steam and Cold Water Mixing Unit Installation, Operating and Maintenance Instructions Last Updated: October, 2012 Strahman Valves, Inc. USA Headquarters 2801 Baglyos Circle Bethlehem, PA
SINGLE-POINT FIXINGS FOR INTERIOR INSTALLATIONS
SINGLE-POINT FIXINGS FOR INTERIOR INSTALLATIONS SINGLE-POINT FIXINGS FOR INTERIOR INSTALLATIONS MANET CONTENT MANET CONCEPT Sliding door system 6 21 Pivoting door system 22 35 Connection system 36 43
Figure 1.1. From left to right: PVC, GRP and AISI 316L. Filter type Filter body material Max pressure Max temperature BSP PVC 150 psig 104 F, 40 C
1. The filter body The filter bodies come in three different materials: PVC (PolyVinyl Chloride), AISI 316L (stainless steel) and GRP (Glass-fiber Reinforced Polyester). Filter bodies in PVC and GRP have
franklinwater.com 50 Hz VR SERIES Vertical Multi-Stage Pumps
franklinwater.com 5 Hz VR SERIES Vertical Multi-Stage Pumps 5 HZ VR SERIES VERTICAL MULTI-STAGE PUMPS Features 2 Applications 2 Pump Specifications Counter-Flange Kits Motor Specifications 4 Ordering