PS42 - Plasma Swivel Manual Wall Mount
|
|
- Merryl Marianna Cook
- 6 years ago
- Views:
Transcription
1 SHEET 1 of 9 DESIGN HIGHLIGHTS Effortless, one handed operation; even with heavy screens Bracket allows perfect parallel tracking before screen is rotated FUNCTION A manual wall bracket that allows simple one handed movement of the screen. Bracket allows perfect parallel tracking before being rotated in either direction up to 60. Bi-directional swivel motion up to 60 Strong steel construction Wide range of mounting options Excellent service bracket allows for installation in tight recesses SUITABILITY The PS42 wall bracket is suitable for screens from 42" up to 50". Up to a maximum weight of 40Kg [88lbs] Larger screens can be installed but maximum possible angles of rotation would be reduced. OPTIONS Bang & Olufsen / Loewe mount options The larger PS50 wall bracket is suitable for 50" to 60" screens. Compatible accessories such as In-Wall Boxes and speaker mounts SPECIFYING Check wall makeup to decide on fixings to be used. Check screen details for mounting possibilities. Check angles for viewing. WARNING It is the responsibility of the installer to make sure the product is safely secured to the wall IMPORTANT Mechanisms which lift or move weights need to be checked on a yearly basis for any damage which may result in an accident
2 SHEET 2 of 9 Design Highlights VIEWS BELOW SHOW MOVEMENT FROM IN POSITION TO MAXIMUM ANGLE OF 60 Bracket design allows for screen to track parallel to wall before being rotated. This allows the screen to be mounted within a tight recess if required. Bracket design means minimal effort is required to move even heavy screen and speaker installations Bracket allows for up to 60 degrees of swivel in either direction. This angle is reduced when wider screens or additional side speakers are installed. Bracket capable of maximum horizontal mounting distances of 400mm [15.7"] and maximum vertical mounting distances of 470mm [18.6"]. Mechanism allows up to 420mm [16.5"] extension of screen centre from mounting surface.
3 Screen Mounting Procedure SHEET 3 of 9 STEP 1 STEP 3 Remove the Screen Mount and secure to the rear of the screen using the rear fixings Lower the screen so that the Hook Pins sit inside the Top Bar Plate and slide the screen mount underneath the Bottom Bar Plate A BAR PLATE BOTTOM Slots allow for 15mm [0.6"] horizontal position adjustment. DETAIL A SCALE 1 : 2 C DETAIL C SCALE 1 : 2 SCREEN MOUNT STEP 2 Tilt the screen forwards and align the Hook Pins with the holes in the Top Bar Plate. STEP 4 Fix the screen mount in place by screwing 2 x M6 bolts into the Bottom Bar Plate. B BAR PLATE TOP BAR PLATE BOTTOM HOOK PIN DETAIL B SCALE 1 : 2 D DETAIL D SCALE 1 : 2
4 Cable Routing Options SHEET 4 of 9 Run the cables up to either top corner of the wall bracket, loop over and run down the out side of the scissor leg as shown with the red line. Secure the cables using cable ties and make sure to allow slack at moving points. OUTER SCISSOR LEG WALL BRACKET POWER / AUX CABLES
5 SHEET 5 of 9 Screen Mounting - Dimensions Remove the screen uprights and secure to the rear of the screen using the rear fixings, then offer the screen back onto the bracket and fix in place MAXIMUM HORIZONTAL MOUNTING DISTANCE MIN MAXIMUM VERTICAL MOUNTING DISTANCE SCREEN UPRIGHTS
6 Bracket Movement - Dimensions SHEET 6 of 9 Top view showing maximum movement of bracket. 60 degree rotation may be reduced with a very wide screen installations. Very smooth one hand operation
7 Wall Plate - Dimensions SHEET 7 of 9 Wall plate mount fixing dimensions. Make sure the wall which the bracket is being mounted to is secure and strong enough to support the bracket and screen C L x THRU x THRU
8 Bracket Only Recess Mounting SHEET 8 of 9 When recessing the bracket into the wall its important to allow 20mm [0.8"] gap around the sides and bottom of the bracket. A 50mm [2"] gap is required at the top to allow the screen mount to be hooked on/off the bracket. A A SECTION A-A
9 Screen Recess Mounting SHEET 9 of 9 When recessing the screen into the wall its important to allow 50mm [2"] gap around the perimeter to allow screen ventilation, this gap can be reduced if the recess design caters for ventilation requirements. Power and signal cables should exit somewhere in the recess to keep cables out of view B Screen Height + 100mm [3.9"] Screen Width + 100mm [3.9"] Screen Depth + 70mm [3.1"] B SECTION B-B
PS42 - Plasma Swivel Manual Wall Mount Technical Sheet
DESIGN HIGHLIGHTS Effortless, one handed operation; even with heavy screens Bracket allows perfect parallel tracking before screen is rotated Bi-directional swivel motion up to 60 Strong steel construction
More informationPLF - Plasma Floor Lift
SHEET 1 of 6 DESIGN HIGHLIGHTS Quiet smooth action with variable speed motion Full cable management Stylish look and finish Wide range of mounting options OPTIONS Marine suitable option FUNCTION n electric
More informationPL - Plasma Lift Mechanism
SHEET 1 of 7 DESIGN HIGHLIGHTS Drop & Roll concealed flap mechanism gives neatest possible look Full cable management Mechanism can be sized to suit specific screen sizes Onboard electronics Wide range
More informationInstallation Instructions
L-PB L-PW Installation Instructions Component Checklist Arm Assembly (with pre-assembled Desk Clamp) Hardware Desk Single Rotation Limiter (x1) (x1) 2mm Allen (x1) Cable Clip (x4) Spacer Bush (x4) Fasteners
More informationCOLD AIR INTAKE INSTALLATION INSTRUCTIONS
COLD AIR INTAKE INSTALLATION INSTRUCTIONS # D760-0030 Fits: 2007-10 135i (E82, E88; with N54 engine) 2007-08 335i/xi (E90) 2007-10 335i (E92, E93; with N54 engine) Congratulations for being selective enough
More informationEssentials. Simple and Easy to Follow Installation Manual % Free Call! Expert Advice.
Essentials Simple and Easy to Follow Installation Manual % Free Call! %800-745-5337 Expert Advice DVD Headrest JK Wrangler Installation Instructions Note: Be sure to read this entire instruction sheet
More informationOne- Touch Installation Instructions
One- Touch Installation Instructions 1 1 Height Adjustable Pivot w/ screws 9 Upper Work Surface 2 Rail Mount Knobs 10 Back Cover 3 Transformer 11 Center Pivot w/ screws 4 Support Legs 12 Left Monitor Arm
More informationSection 5: Parts Replacement
Section 5: Parts Replacement Should the STAR TRAC 4500 Treadmill experience a problem requiring replacement of a specific part, the following procedures will help and instruct in the replacement of major
More informationLand Cruiser FJ80 and FZJ80 Double Swingout Rear Bumper Installation Instructions PRELIMINARY
Land Cruiser FJ80 and FZJ80 Double Swingout Rear Bumper Installation Instructions Fits 1991-1997 80 Series Land Cruiser / Lexus LX450 PRELIMINARY Thank you for purchasing a Rear Bumper for your Land Cruiser.
More informationGS5 GYM MULTI STATION USER MANUAL
GS5 GYM MULTI STATION USER MANUAL Product may vary slightly from the item pictured due to model upgrades Read all instructions carefully before using this product. Retain this owner s manual for future
More informationMultifunctional wall mount
Step6: Adjusting the display This mount provides a wealth of display adjustment to offer the best viewing from a number of seating positions. See Fig. 6. Vertical Tilt Adjustment Angle Vertical adjustment
More informationRS-2 SINGLE ACTION REAR BUMPER WITH TIRE CARRIER INSTALL MANUAL FOR JEEP WRANGLER ALL MODELS.
RS-2 SINGLE ACTION REAR BUMPER WITH TIRE CARRIER INSTALL MANUAL FOR 2007-2016 JEEP WRANGLER ALL MODELS. Rear Bumper Installation Instructions 1) Remove factory rear bumper, (this includes all tow hitch
More information3875 Cypress Drive Petaluma, CA Fax
3875 Cypress Drive Petaluma, CA 94954 800.228.2555 +1.707.773.1100 Fax 707.773.1180 www.gcx.com VHM-P (Non-Locking) Variable Height Arm with Fixed Angle Front End for Flat Panel / Keyboard Bracket (L Brackets
More informationVHM-P (Non-Locking) Variable Height Arm with VESA Mounting Plate for 75 x 75mm or 100 x 100mm applications
3875 Cypress Drive Petaluma, CA 94954 800.228.2555 +1.707.773.1100 Fax 707.773.1180 www.gcx.com VHM-P (Non-Locking) Variable Height Arm with VESA Mounting Plate for 75 x 75mm or 100 x 100mm applications
More information0 = 0 mm rear cover panel edging (standard) Number = rear cover panel edging according to table
Type overview FSR with guide cables or rods Type key FSR P S 0 0 = 0 mm rear cover panel edging (standard) Number = rear cover panel edging according to table Cover panel without back-fold: S = small,
More informationVHM-P (Non-Locking) and VHM-PL (Locking) Variable Height Arm with Slide-In Mounting Plate
3875 Cypress Drive Petaluma, CA 94954 800.228.2555 +1.707.773.1100 Fax 707.773.1180 www.gcx.com VHM-P (Non-Locking) and VHM-PL (Locking) Variable Height Arm with Slide-In Mounting Plate (Refer to qualified
More informationBX7460P Allure Tow Bar Operator Manual & Installation Instructions. ALLURE Tow Bar (10,000 lb) Pintle Coupler
Operator Manual & Installation Instructions ALLURE Tow Bar (10,000 lb) Pintle Coupler Hooking Up to Towed Vehicle 1. Position the towing vehicle on a level surface with a straight driveway ahead and engage
More information2 Rubber Bumper GSM MM nut GSM30201 K9-F18-PT_INST_4-16
K9-F18-PT INSTALLATION INSTRUCTIONS K9 Kit for 2013-2019 FORD INTERCEPTOR UTILITY Vehicle Notes: 1. For K9 applications, it is recommended to order the Interceptor Utility with the OEM optional Aux Rear
More informationINSTALLATION INSTRUCTIONS 6306 Air Spring Kit
INSTALLATION INSTRUCTIONS 6306 Air Spring Kit Thank you for purchasing a quality Hellwig Product. PLEASE READ THIS INSTRUCTION SHEET COMPLETELY BEFORE STARTING YOUR INSTALLATION IMPORTANT NOTES DO NOT
More informationKnürr Miracel. Knürr Miracel. 19 Server Rack Platform.
Knürr Miracel 19 Server Rack Platform marketing@dafnia.com www.dafnia.com A B U DHABI DUBAI JAFZA MUSCAT DOHA UAE +971 2 5557351 +971 4 3352995 +971 4 8831401 OMAN +968 24 750205 QATAR +974 44150543 Knürr
More informationSCAN OPTICS SO-5800 MICROSCOPE ASSEMBLY MANUAL
SCAN OPTICS SO-5800 MICROSCOPE ASSEMBLY MANUAL SO-5800 Ophthalmic Microscope Assembly Manual Page 2 of 25 CONTENTS INTRODUCTION... 3 PACKING LIST... 5 MECHANICAL ASSEMBLY... 6 Floor stand base and pillar...
More informationINSTALLATION GUIDE Car Show Dual DVD Headrest Replacement System
INSTALLATION GUIDE Car Show Dual DVD Headrest Replacement System NOTICE OF INTENDED INSTALLATION AND USE CAR SHOW VIDEO PRODUCTS ARE NOT INTENDED FOR VIEWING BY THE DRIVER, AND ARE TO BE INSTALLED ONLY
More informationTruckSkin F.A.Q.s and Tips
1 TruckSkin F.A.Q.s and Tips Here are some helpful answers and tips for your self installation. You can see more installation information on our website TruckSkin.com Please contact us with any questions.
More informationInstallation instructions, accessories. Multimedia monitor with DVD, Dual screen. Multimedia monitor with DVD, Dual screen V1.
Installation instructions, accessories Instruction No 30756560 Version 1.2 5 Part. No. 30756177 Multimedia monitor with DVD, Dual screen Volvo Car Corporation Multimedia monitor with DVD, Dual screen-
More informationWARNING. When installed in accordance with these instructions, the front protection bar does not affect operation of the SRS airbag.
Part Number: 343870 F/Kit 17557 Product Deluxe Combination Winch and Non Winch Bull Bar Description: Suited to Nissan XTERRA 05ON USA Only vehicle/s: WARNING REGARDING VEHICLES EQUIPPED WITH SRS AIRBAG;
More informationEZ Tool Articulating Arm
EZ Tool Articulating Arm EZ tool arm features: Covers a 610 x 762 mm (24 x 30 inch) horizontal rectangular work envelope. Two piece arm with overall length from 864 to 1067 mm (34 to 42 inches). Anodized
More informationThe Duck Dunker. Assembly & Setup Instructions WARNING! DO NOT RUN THE DUCK DUNKER OUT OF THE WATER. DAMAGE TO UNIT MAY OCCUR & WILL VOID WARRANTY!!!
The Duck Dunker Assembly & Setup Instructions WARNING! DO NOT RUN THE DUCK DUNKER OUT OF THE WATER. DAMAGE TO UNIT MAY OCCUR & WILL VOID WARRANTY!!! Tools Required 2-10mm open or boxed end wrenches 1 Spinning
More informationINSTALLATION GUIDE PREMIUM FRONT BUMPER FOR RAM AEV30304AA Last Updated: 09/18/17
AEV30304AA Last Updated: 09/18/17 PREMIUM FRONT BUMPER FOR RAM 1500 INSTALLATION GUIDE PLEASE READ BEFORE YOU START To guarantee a quality installation, we recommend reading these instructions thoroughly
More informationSteel Lockers SYSTEMS FOR SUCCESS
Steel Lockers Quiet Lockers Durable Finish Tough powder-coated finish keeps its good looks for years. Hat Shelf Handy shelf for personal storage of hats, gloves, toiletries, books, etc. Heavy-Duty Frame
More informationToyota Fortuner SX046
Important: 1. Please refer to your fi tting instruction to ensure that the roof racks are installed in the correct locations. 2. Check the contents of kit before commencing fi tment and report any discrepancies.
More informationFITTING OIL TEMP AND PRESSURE GUAGES
FITTING OIL TEMP AND PRESSURE GUAGES this guide is of reference to fitting an oil temp and pressure sender/ sensor into a sandwich plate- not the sump plug temp sensor (although it wouldn't be much different
More informationINSTALLATION INSTRUCTIONS AND OWNER S MANUAL
INSTALLATION INSTRUCTIONS AND OWNER S MANUAL Thank you for purchasing the AlloyCover from WeatherTech. Manufactured with pride using superior quality materials and workmanship. With proper care, your cover
More informationAdult Car Plans. A comprehensive guide to help you build an official Soap Box Derby Adult Car
Adult Car Plans A comprehensive guide to help you build an official Soap Box Derby Adult Car 1 Table Of Contents Introduction...Page 3 Adult Car Floorboard...Page 4 Step One Steering Stop Installation...Page
More informationK U B O T A M I N I E X C A V A T O R
K U B O T A M I N I E X C A V A T O R Powerful & Versatile Combining the power for demanding jobs and the versatility to work in any condition, the Kubota U55-4 is ready to take on any challenge. This
More informationCheck what you have received against the component checklist and hardware above.
SSS SSPW SSW SSPB SSB Component Checklist Installation Instructions SYSTEMA Systema Monitor Spring Arm HARDWARE Display Mounting Spacers (x4) 3/4mm Allen Keys Display Mounting Screws Arm Assembly VESA
More informationCheck what you have received against the component checklist and hardware above.
SSS SSPW SSW SSPB SSB Component Checklist Installation Instructions SYSTEMA Systema Monitor Spring Arm HARDWARE Display Mounting Spacers (x4) 3/4mm Allen Keys Display Mounting Screws Arm Assembly VESA
More informationCOMPONENTS RTV WINDER WINDER WHEEL ARM AUTO WIND SHEAR BOLT WIRE GUIDES STAY BAR TOP PULLEY REEL SHAFT CLUTCHES SPRINGS GEAR BOX DRIVE WHEEL
HANDBOOK RTV Winder COMPONENTS RTV WINDER WINDER WIRE GUIDES SHEAR BOLT AUTO WIND STAY BAR REEL SHAFT TOP PULLEY CLUTCHES SPRINGS GEAR BOX WHEEL ARM DRIVE WHEEL WHEEL ARM PULLEY BELT TENSIONER MOUNTING
More informationF-150 Super Crew W/Opening Console Installation
2004-08 F-150 Super Crew 40-20-40 W/Opening Console Installation Step 1. Driver and Passenger Tops/DT&PT: All the parts of your seat cover are labeled inside. Use the Seat Cover Piece Identification Chart
More informationALUMINUM UTILITY TRAILERS
ALUMINUM UTILITY TRAILERS BUILT FOR ADVENTURE. UTILITY TRAILERS page The Triton Difference page AUT Series page 8 AUX Series page 0 TILT Series page ATV Series page ATV-90-TR Series page GU Series page
More informationCHEVROLET TAHOE/DENALI/AVALANCHE/YUKON/ SILVERADO/SIERRA 2007+
CHEVROLET TAHOE/DENALI/AVALANCHE/YUKON/ SILVERADO/SIERRA 2007+ INSTALLATION INTRODUCTION 1. REMOVING THE FENDER AND DOORS FROM THE A-PILLAR AND DISCONNECTING THE WIRE HARNESS @ THE DOOR JAM 2. REMOVING
More informationKlöber Orbit Orbit Network Operating instructions
Klöber Orbit Orbit Network Operating instructions 1. 6. 5. 2. 2 7. 4. 3. 3 4 1. Seat height adjustment The seat height of your swivel chair can be steplessly adjusted using a gas spring. To adjust the
More information564 Shadowbox Face (w Screen) Instructions
Packing List Compatibility Face Bottom Shield (2) Face Brackets (8) Screws (#8 x 3/8 Phillips) (5) Screws (#8 x 5/8 hex head) Drill Template 11/64 Drill Bit Items Used with Optional Switch Box (see note
More informationSTATE OF NORTH CAROLINA D DEPARTMENT OF ADMINISTRATION MARCH 20, 1995 PURCHASE AND CONTRACT DIVISION 7125-LM-2C November 9, 1989
STATE OF NORTH CAROLINA 7125-2D DEPARTMENT OF ADMINISTRATION MARCH 20, 1995 PURCHASE AND CONTRACT DIVISION Superseding 7125-LM-2C November 9, 1989 SPECIFICATION FOR LOCKERS, METAL (This specification is
More informationNEW CAR TIPS. Teaching Guidelines
NEW CAR TIPS Teaching Guidelines Subject: Algebra Topics: Patterns and Functions Grades: 7-12 Concepts: Independent and dependent variables Slope Direct variation (optional) Knowledge and Skills: Can relate
More informationInstallation Instructions :AUDI 8V RS3 : Page 1
Installation Instructions :AUDI 8V RS3 : Page 1 1. We will start by removing the stock airbox system. Remove the 2 screws holding the inlet duct in place. Then push the duct into the airbox to release
More informationPARALLEL STAY. Parallel Opening Hinge for Commercial Applications
PARALLEL STAY Parallel Opening Hinge for Commercial Applications Cotswold parallel hinges provide natural ventilation whilst maintaining aesthetically pleasing sightlines for modern façade design. Parallel
More informationDown and Out Motor Mount Assembly & Installation Directions
Down and Out Motor Mount Assembly & Installation Directions Mounting the Down and Out Motor Mount correctly takes a lot of thought and a lot of planning. Please read the directions thoroughly and plan
More informationSuperJoe 2 & 3, LittleJoe
SuperJoe 2 & 3, LittleJoe STRAPS (SuperJoe 3) CRADLE FRAME STABILIZER CRADLE LOAD ARMS HOOKS HUB (RED TRIGGER) EXTRA WHEEL STRAP (SUPER JOES) SIDE STRAPS BIKE STRAPS (SUPER JOES) SIDE HOOKS LOWER FRAME
More informationTHE PROWLER LIGHTBAR
THE PROWLER LIGHTBAR INSTALLATION INSTRUCTION PL-46B Contents Mounting Instructions...2 Installing mounting legs...2 Vehicle mounting...3 Wiring Instructions... 4 Connecting the harness... 4 Options and
More informationCrestline Dampening System. Installation Instructions. Ryobi 500N X /98
Crestline Dampening System Installation Instructions Ryobi 500N X88-33 7/98 GENERAL INFORMATION ATTENTION CRESTLINE DAMPENER OWNER! Accel Graphic Systems provides parts and service through its authorized
More informationVehicle Modifications & Accessible Transportation
Vehicle Modifications & Accessible Transportation Rear-Entry Wheelchair & Scooter Accessible Vans This van s floor is lowered in the center from behind the front seats all the way to the rear of the van,
More informationPARTS LIST TORQUE SPECIFICATIONS
INSTALLATION INSTRUCTIONS Trans4mer Mounting System Toyota Tacoma Kit No. 32522(black) or 32523(chrome) PARTS LIST PART NO. QUANTITY DESCRIPTION 32503 1 FRAME EXTENSION, R.H. 32504 1 FRAME EXTENSION, L.H.
More informationPARALLEL STAY. Parallel Opening Hinge for Commercial Applications
PARALLEL STAY Parallel Opening Hinge for Commercial Applications Cotswold parallel hinges provide natural ventilation whilst maintaining aesthetically pleasing sightlines for modern façade design. Parallel
More informationPRE DELIVERY INSPECTION 6200 / 6280 / 6350 / 6450/ 6550ST/ 6700ST TOW BEHIND Date:
Effective Sept 15/14 PRE DELIVERY INSPECTION 6200 / 6280 / 6350 / 6450/ 6550ST/ 6700ST TOW BEHIND Date: Dealer: Model: Serial # DETAILED SPECIFICATIONS: REAR TIRES FRONT TIRES 18.4 x 26 R1 Lug tires 21.5L-16.1
More informationSTEERING SYSTEM Introduction
STEERING SYSTEM Introduction The steering makes it possible to change direction. The steering must be reliable and safe; there must not be too much play in the steering. It must be possible to steer accurately.
More informationKUBOTA MINI EXCAVATOR
KUBOTA MINI EXCAVATOR Powerful & Versatile Combining the power for demanding jobs and the versatility to work in any condition, the Kubota U55-4 is ready to take on any challenge. This advanced 5.4 tonne
More informationPAH, PAHT, PAHT G pumps PAH , PAHT and PAHT G Disassembling and assembling
Servie guide PAH, PAHT, PAHT G pumps PAH 10-12.5, PAHT 10-12.5 and PAHT G 10-12.5 Disassembling and assembling hpp.danfoss.com Table of Contents 1. Disassembling the pump...3 2. Inspection...7 2.1. Port
More informationZido Adjustable-Height Cart
Product Sheet Zido Adjustable-Height Cart Highlights Work comfortably sitting or standing, with a height range of - (76.2-101.6 cm) Choose from two widths and two lift capacities Standard carts lift 16-30
More informationINSTALLATION GUIDE. AV8900H Dual Multimedia Headrest Replacement System
INSTALLATION GUIDE AV8900H Dual Multimedia Headrest Replacement System NOTICE OF INTENDED INSTALLATION AND USE AV8900H VIDEO PRODUCTS ARE NOT INTENDED FOR VIEWING BY THE DRIVER, AND ARE TO BE INSTALLED
More informationDODGE SLT Installation Instructions
1994-97 DODGE SLT 40-20-40 Installation Instructions Step 1. Driver and Passenger Bottoms/DB&PB: All the parts of the seat cover are labeled inside. Use the seat cover piece identification chart to ID
More informationKUBOTA MINI EXCAVATOR
KUBOTA MINI EXCAVATOR Powerful & Versatile Combining the power for demanding jobs and the versatility to work in any condition, the Kubota U48-4 is ready to take on any challenge. This advanced 4.7 tonne
More informationMake sure all wiring is inserted into the cavity between the insert and the fireplace. Failure to do this may cause the wiring to become damaged.
Installation Notes Large Flush Wood Hybrid-Fyre Insert: (96400539, 96400539A) Before installing, make sure to install the one-piece panel, and disconnect the power cords making sure the Molex connector
More informationProPass-200 Top Dresser
Setup Manual Form No. 3365-184 Rev A ProPass-200 Top Dresser Model No. 44700-Serial No. 310000001 and Up Model No. 44701-Serial No. 310000001 and Up Model No. 44704 Model No. 44705 Model No. 44706 Model
More informationINSTALLATION GUIDE AV7900 Dual Multimedia Headrest Replacement System
INSTALLATION GUIDE AV7900 Dual Multimedia Headrest Replacement System NOTICE OF INTENDED INSTALLATION AND USE AV7900 VIDEO PRODUCTS ARE NOT INTENDED FOR VIEWING BY THE DRIVER, AND ARE TO BE INSTALLED ONLY
More informationMaking Instructions Version 2.1 for Windows
Making Instructions Version 2.1 for Windows Ohbot Ltd. 2017 About Ohbot has seven motors. Each connects to the Ohbrain circuit board and this connects to a computer using a cable. Ohbot software allows
More informationSaab 9-3, Saab Installation instructions MONTERINGSANVISNING INSTALLATION INSTRUCTIONS MONTAGEANLEITUNG INSTRUCTIONS DE MONTAGE.
SCdefault 900 Installation instructions SITdefault Saab Child Seat MONTERINGSANVISNING INSTALLATION INSTRUCTIONS MONTAGEANLEITUNG INSTRUCTIONS DE MONTAGE Accessories Part No. Group Date Instruction Part
More informationINSTALLATION & OWNER S MANUAL
p. 1 of 15 INSTALLATION & OWNER S MANUAL Polaris Ranger 500-800 PathPro SS Cab (fits 2010 - current) (p/n: 1POLRFS1) The contents of this envelope are the property of the owner. Be sure to leave with the
More informationInstructions for Use Plain Trolley ULK Geared Trolley UHK
Instructions for Use Plain Trolley Geared Trolley Item no. Load-carrying capacity (payload) Weight Trolley widths *special trolley widths* Device dimensions mm H / W / D Minimum curve radius mm -005 0,5
More information393: Multimedia system for the rear seat Multimedia system for the rear seat
393: Multimedia system for the rear seat S80 (07-), 2008, B8444S, TF-80SC AWD, L.H.D, YV1AH852881073834, 073834 4/1/2013 PRINT 393: Multimedia system for the rear seat Multimedia system for the rear seat
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS Thank you for purchasing a LOMAX TM Hard Tri-Fold or Professional Series Cover. Agri-Cover, Inc. proudly manufactured this cover using superior quality materials and workmanship.
More informationPULLDOZER 1800/1800XL/2400/2400XL
PULLDOZER 1800/1800XL/2400/2400XL Assembly and Parts Manual Bridgeview Manufacturing Inc. P.O. Box 4 Gerald, SK S0A 1B0 (306) 745-2711 www.bridgeviewmanufacturing.com bmi@sasktel.net 2 1. Component Information
More informationLPE C5 Battery Relocation Kit
LPE C5 Battery Relocation Kit The LPE C5 Corvette battery relocation kit improves vehicle weight distribution by moving weight to the rear of the vehicle. The improved weight distribution increases traction
More informationAP-Xtreme Sim-Racing Chassis Master Assembly Guide
AP-Xtreme Sim-Racing Chassis Master Assembly Guide This guide covers all options available for the AP-Xtreme chassis. Some sections of this guide will be skipped based on the options chosen. APX1000 APX2000
More informationINSTALLATION INSTRUCTIONS AND OWNER S MANUAL
INSTALLATION INSTRUCTIONS AND OWNER S MANUAL Thank you for purchasing the AlloyCover from WeatherTech. Manufactured with pride using superior quality materials and workmanship. With proper care, your cover
More informationLOCKN LOAD MOUNTING KIT
LOCKN LOAD MOUNTING KIT TM VOLKSWAGEN AMAROK 2 BAR FIXED POINT HEAVY DUTY ROOF RACK SYSTEM MAX VEHICLE ROOF LOAD RATING: 100KG TOTAL LOAD EQUALS WEIGHT OF ROOF RACKS + ACCESSORIES + CARGO FIRST TIME INSTALLATION
More informationKX KX91-3 SUPER SERIES MK 2
KUBOTA COMPACT EXCAVATOR KX KX91-3 SUPER SERIES MK 2 The KX91-3S2 takes you to a new level of performance, so you can dig deeper, reach further and work more efficiently. *This information is sourced from
More informationInstallation Instructions RD/HD
FISHER ENGINEERING P.O. Box 529 Rockland, Maine 04841 27000 RD/HD 27200 RD/HD August 1, 2001 Lit. No 26916 Installation Instructions 27000 RD/HD Table of Contents Safety Information... 2 Blade, Headgear,
More information(Refer to qualified personnel)
3875 Cypress Drive Petaluma, CA 94954 800.228.2555 +1.707.773.1100 Fax 707.773.1180 www.gcx.com Installation Guide VHM-P (Non-Locking) and VHM-PL (Locking) Variable Height Arm (Slide-Above-Arm Configuration)
More informationCheck what you have received against the component checklist and hardware above.
SSS SSPW SSW SSPB SSB Component Checklist Installation Instructions SYSTEMA Systema Monitor Spring Arm HARDWARE Display Mounting Spacers (x4) 3/4mm Allen Keys Display Mounting Screws Arm Assembly VESA
More informationINSTALLATION INSTRUCTIONS 3063 / FORD F-150
INSTALLATION INSTRUCTIONS 3063 / 3063-2 2009-10 FORD F-150 PARTS LIST: Qty Description Qty Description 1 Grill Guard 4 12mm x 44mm OD Flat Washers 1 Driver/Left Lower Mounting 4 12mm Hex Nut 1 Passenger/Right
More informationHow to Replace a Switch
How to Replace a Switch The switches are the ones most frequently replaced, either because a switch has failed or because you want to substitute a newer type. Before deciding that a switch has failed,
More informationWOC & WOC Top & Back Installation Instructions
Shown with optional Sun Roof WOC-900500-2 & WOC-900501-2 Top & Back Installation Instructions Install Order! Heater Door System Wiper on to Windshield Windshield Rear Panel Top Panel Tools needed: 5/16
More informationINSTALLATION INSTRUCTIONS FOR DSP9600/9100 WHEEL BALANCER
Form 5063T, 06-05 Supersedes Form 5063T, 02-04 INSTALLATION INSTRUCTIONS FOR DSP9600/9100 WHEEL BALANCER This document provides the information needed to install the DSP9600/9100 Wheel Balancer. NOTE:
More informationFiber optic splice closure
FOSC-450A I N S T A L L A T I O N I N S T R U C T I O N TC-772-IP Rev A, Mar 2017 www.commscope.com Fiber optic splice closure Content 1 Introduction 2 General 2.1 Kit content 2.2 Tools 2.3 Accessories
More informationVOH681A Drop Down Video Monitor VOH682A Drop Down TV / Video Monitor OPEN. Installation Guide
VOH681A Drop Down Video Monitor VOH682A Drop Down TV / Video Monitor ON OFF AUTO OPEN Installation Guide Important Notice It is unlawful in most jurisdictions for a person to drive a motor vehicle which
More informationNORTHSTAR TRAILERS. Assembly Guide for SPORTSTAR II Trailer
NORTHSTAR TRAILERS Assembly Guide for SPORTSTAR II Trailer Congratulations! You are the proud owner of a NORTHSTAR trailer. Please follow the instructions and steps in this manual for proper assembly.
More informationInstallation Manual for VHM-25 Series Arms Channel Mount
3875 Cypress Drive Petaluma, CA 94954 800.228.2555 707.773.1100 Fax 707.773.1180 www.gcx.com Installation Manual for VHM25 Series Arms Channel Mount Install Time: 1015 minutes The purpose of this manual
More informationINSTALLATION INSTRUCTIONS FORD F-150 2WD & 4WD RETAINS FACTORY TOW HOOKS PART #P3063
INSTALLATION INSTRUCTIONS FORD F-150 2WD & 4WD RETAINS FACTORY TOW HOOKS PART #P3063 PARTS LIST: 1 Grille Guard 2 10-1.5mm Nylon Lock Nuts 1 Driver/Left Frame Mounting Bracket 4 12mm Plastic Washers 1
More informationCHROME WIRE SHELVING. To order please see back cover. from. from. from FREE. Chrome Wire Shelving: DAYS.
146. 10 105. 35 Garment Rack Wine Rack DAYS FREE DELIVERY Chrome Wire Shelving: Simple to build, stylish storage solutions. 123. 55 3 Tier Trolley 970 x 915 x 460 CWSKIT2 123.55 970 x 915 x 610 CWSKIT3
More informationSEATING INSTRUCTIONS. Trooper
Trooper Trooper Asynchronous Control 6 8 2 Seat Depth 9 Arm Width 5 Tilt Tension 7 Back Angle Forward Tilt 1 Seat Angle 1. Enables the seat to adjust to the preferred height. To raise the seat, lift your
More informationDukane Projection System (DPS)
Dukane Projection System (DPS) Installation Guidelines CEILING SCREEN CAMERA SPEAKERS VCR/DVD PC 1. Determine or measure the screen width or diagonal which corresponds to your projector to find the maximum
More informationGeneral Front Windshield
General Front Windshield **WATCH OUR INSTALL VIDEO ALONG WITH INSTALL SHEET. 8-5/16-18x1 Black Carriage Bolts 8-5/16 Black Nylock Nuts 2-5/16x1-1/4 Stainless Steel Socket Head Screws 2-Rubber Grommets
More informationGM G-BODY LSD INSTALLATION
GM G-BODY 1979-1987 LSD INSTALLATION INSTALLATION INTRODUCTION 1. REMOVING THE FENDER AND DOORS FROM THE A-PILLAR AND DISCONNECTING THE WIRE HARNESS @ THE DOOR JAM 2. REMOVING THE EXISTING DOOR HINGES
More informationHardware Solution for Windows
Hardware Solution for Windows Turn-Tilt Fittings Style 180 Turn-Tilt Fittings Standard Turn-Tilt Fittings Heavy Duty Dual Turn-Tilt Fitting Opening Restrictor Handle controlled opening arrester Wilh. Schlechtendahl
More informationWind Tunnel User Guide V0814
Airtech X-Stream Wind Tunnel User Guide 57889 V0814 The Airtech X-Stream Wind Tunnel by Pitsco features adjustable speed and runs quietly. Quality-made and designed for accuracy, the versatile X-Stream
More informationC.3 CHRONO MISCELLANEOUS. Contents. turn-tilt- and tilt-turn window
C.3 Turn-tilt and tilt-turn windows CHRONO MISCELLANEOUS Contents 1. Night vent device n 30140-861 C.3.02 1.1. General C.3.02 1.2. Profile dimensions C.3.02 1.3. Operation C.3.03 1.4. Air flow C.3.03 1.5.
More informationK U B O T A M I N I E X C A V A T O R
2350 K U B O T A M I N I E X C A V A T O R SUPERIOR PERFORMANCE Kubota s new KX019-4 mini excavator raises the standard in the 1.5-2.0 tonne category with a powerful digging force and a wider working range
More informationSERIES B & C ROLLER DOORS INSTALLATION GUIDE
SERIES B & C ROLLER DOORS INSTALLATION GUIDE THESE INSTRUCTIONS ARE PROVIDED FOR USE BY EXPERIENCED INSTALLERS OF GARAGE DOORS BY UNDERTAKING THE INSTALLATION OF THIS DOOR, THE INSTALLER UNDERSTANDS THE
More informationK U B O T A M I N I E X C A V A T O R
K U B O T A M I N I E X C A V A T O R Powerful & Versatile Combining the power for demanding jobs and the versatility to work in any condition, the Kubota U48-4 is ready to take on any challenge. This
More informationKUBOTA MINI EXCAVATOR
KUBOTA MINI EXCAVATOR Kubota s new KX019-4 mini excavator raises the standard in the 1.5-2.0 tonne category with a powerful digging force and a wider working range that rival higherend excavators. And
More information