Definite purpose contactors

Transcription

1 Definite purpose contactors

2 Three-pole and four-pole non-reversing DP contactors 600VAC T4 DPBF09 - DPBF12 - DPBF18 - DPBF09 T4 - DPBF12 T4 - DPBF18 T4 DPBF26A DPBF32A DPBF50 DPBF80 Motor Locked Rotor Resistive Maximum Horsepower Incorporated Type of Catalog Number Full Load Load Auxiliary termination Amps (FLA) 1 Phase 3 Phase Contacts 600V 240V 480V 600V 600V 120V 240V 200V 240V 480V 600V (SPST) [A] [A] [A] [A] [A] [HP] [HP] [HP] [HP] [HP] [HP] NO NC THREE POWER POLES / Clamp-screw 01 A❶ 1 0 A❶ / Clamp-screw DPBF09 01 A❶ 1 0 DPBF09 A❶ Clamp-screw DPBF12 01 A❶ 1 0 DPBF12 A❶ /2 7 1 / Clamp-screw DPBF18 01 A❶ 1 0 DPBF18 A❶ / Clamp-screw DPBF26 00 A❶ Clamp-screw DPBF32 00 A❶ Double lug-clamp DPBF50 00 A❶ / Double lug-clamp DPBF80 00 A❶ FOUR POWER POLES ❷ / Clamp-screw T4 A❶ / Clamp-screw DPBF09 T4 A❶ Clamp-screw DPBF12 T4 A❶ /2 7 1 / Clamp-screw DPBF18 T4 A❶ / Clamp-screw DPBF26 T4 A❶ Double lug-clamp DPBF50 T4 A❶ / Double lug-clamp DPBF80 T4 A❶ NOTE: All types have undergone UL endurance tests of 250,000 cycles. DIMENSIONS [mm (in)], 3 and 4 poles (0.33 ) 8.5 (0.33 ) 8.5 (0.33 ) (0.38 ) 4 (0.16 ) 34.9 (1.37 ) 50 (1.97 ) DPBF26-DPBF32, 3 poles 7.9 DPBF50-DPBF80, 3 poles 9 (0. ) 146 (5.75 ) (2.16 ) 18.5 (0.73 ) 1 (4.33 ) 80 (3.15 ) 57 (2.24 ) Ø (5. ) 125 (4.92 ) ❶ Complete catalog number with coil code in the side table. ❷ The DPBF pole types can be retrofitted with fourth pole, catalog number BFX42 or BFX43. See page (4.51 ) DPBF09-DPBF12-DPBF18, 3 and 4 poles (0.43 ) DPBF26, 4 poles (2.40 ) (0.62 ) 71 (2.79 ) DPBF50-DPBF80, 4 poles 18 (0.71 ) 9 (0. ) 1 (4.33 ) 81 (3.19 ) 80 (3.15 ) Code Voltage range VAC 60Hz VAC 60Hz VAC 60Hz VAC 60Hz VAC 60Hz Ø (3.18 ) 136 (5. ) 125 (4.92 ) (4.51 ) DPBF26 T4 DPBF50 T4 DPBF80 T4 General characteristics Ideal for air conditioning, heating, ventilation, refrigeration of HVACR industry, compressors, food and beverage industry. Main features: Motor FLA ratings at 600VAC: 14 to 80A Finger safe terminals Positive (force) guided contacts Up to four front or side mount auxiliary contacts Highly conductive auxiliary contacts Quick and simple installation for accessories Easy coil replacement Wide coil operating range. Operating characteristics Average coil consumption at 20 C/70 F: In rush Holding 25VA 4VA DPBF VA 9VA DPBF VA 15VA Built-in auxiliary contact ratings: A600 for all SPST, if any Screw termination: Torque Wire size 9lbin AWG8-12 DPBF lbin AWG8-16 DPBF lbin AWG6-14 DPBF lbin AWG18-2 Operating temperature: : C/ F DPBF: C/ F Certifications and compliance Certifications: UL Listed for USA and Canada (File E93602) under Motor Controllers Definite purpose contactors. All contactors are CE marked per European Union requirements. Compliant with standards: UL , UL , CSA C22.2 n , CSA C22.2 n

3 Add-on blocks - Accessories - Spare parts Add-on blocks - Accessories for type Characteristics Max Catalog qty per number contactor n Auxiliary contacts with front center mounting. Screw terminals. 2NC 1 BGX 02 1NO + 1NC 1 BGX 11 2NO 1 BGX 20 4NC 1 BGX 04 1NO + 3NC 1 BGX 13 2NO + 2NC 1 BGX 22 3NO + 1NC 1 BGX 31 4NO 1 BGX 40 Mechanical interlock. For side by side 1 BGX50 00 Quick connect surge suppressors. 48VAC/DC (Varistor) BGX VAC/DC (Varistor) BGX VAC/DC (Varistor) BGX VDC (Diode) BGX VAC (Resistor-Capacitor) BGX VAC (Resistor-Capacitor) BGX VAC (Resistor-Capacitor) BGX VAC (Resistor-Capacitor) BGX Modular protection cover. Raises protection to IP40 BGX80 00❶ Rigid connecting kits for reversing contactor assembly. For side by side with SMX 22 BGX50 00 interlock Spare parts NO COIL REPLACEMENT FOR DPBG CONTACTORS IS POSSIBLE. ❶ The protection cover can be used with no auxiliary contacts, surge suppressor or mechanical interlock mounted. Certifications and compliance Certifications for accessories: Type culus CSA BGX BGX50 00 BGX7 BGX80 00 SMX 02 ❷ For DPBF accessories: BFX42-BFX43 BFX-BFX12 G418-G428 ❸ BFX50 BFX7 G269 2 ❸ BFX31 ❷ UL Recognized for USA only (File E197069) as Panel and Switchboard Accessories Component. ❸ UL Recognized for USA only (File E93601) as Auxiliary devices Component. culus UL Listed for USA and Canada (File E93601) as Auxiliary devices. CSA CSA certified for Canada only (File 54332) as Auxiliary devices for motor controllers. All products are also CE marked per European Union requirements. Comply with standards: UL 508, CSA C22.2 n 14. Add-on blocks - Accessories - Spare parts for DPBF types Characteristics Max Catalog qty per number contactor n Fourth pole. For DBBF26-DPBF32 contactors 1 BFX42 For DBBF50-DPBF80 contactors 1 BFX43 Auxiliary contacts with front center mounting. Screw terminals. 2NC 1 BFX 02 1NO + 1NC 1 BFX 11 2NO 1 BFX 20 4NC 1 BFX 04 1NO + 3NC 1 BFX 13 2NO + 2NC 1 BFX 22 3NO + 1NC 1 BFX 31 4NO 1 BFX 40 Auxiliary contacts for front lateral mounting. Screw terminals. 1NO 2 G418 1EM (Early Make) 2 G418 A 1NC 2 G LB (Late Break) 2 G418 01D Auxiliary contacts for side mounting. Screw terminals. 1NO 2 G428 1EM (Early Make) 2 G428 A 1NC 2 G LB (Late Break) 2 G428 01D 2 NC for DPBF09-DPBF32 2 BFX12 02 contactors 1NO+1NC for 2 BFX12 11 DPBF09-DPBF32 contactors 2NO for DPBF09-DPBF32 2 BFX12 20 contactors Mechanical interlocks. Side mount for 1 BFX50 00 Side mount with 2NC contacts 1 BFX50 01 for Front mount low profile for 1 Front mount for 1 BFX50 03 Side mount for 1 BFX53 00 DPBF50-80 contactors Side mount with 2NC contacts 1 BFX53 01 for DPBF50-80 contactors Front mount for 1 BFX53 03 DPBF50-80 contactors Surge suppressors, quick connect to DPBF09-DPBF80. 48VAC (Varistor) BFX VAC (Varistor) BFX VAC (Varistor) BFX VAC (Resistor-Capacitor) BFX VAC (Resistor-Capacitor) BFX VAC (Resistor-Capacitor) BFX VAC (Resistor-Capacitor) BFX Characteristics Catalog number Rigid connecting kits for three-pole reversing contactor assembly. For DPBF09-18 side by side with BFX31 01 or BFX50 03 interlock For DPBF09-18 side by side with BFX31 02 BFX50 00 or BFX50 01 interlock For DPBF26-32 w/ BFX50... interlock BFX32 01 Protection cover. For BFX80 Screw fixing adapters. Universal base to screw fix BFX89 01 Screw fixing brackets for BFX89 02 Spare parts For DPBF contactors, standard coil voltages and frequency. Four-terminal coil for DPBF09-18 types. 60Hz 24VAC BFX91A VAC BFX91A VAC BFX91A VAC BFX91A VAC BFX91A VAC BFX91A VAC BFX91A Four-terminal coil for DPBF26-32 types. 60Hz 24VAC BFX92A VAC BFX92A VAC BFX92A VAC BFX92A VAC BFX92A VAC BFX92A VAC BFX92A Two-terminal coil for DPBF50-80 types. 60Hz 24VAC BFX93A VAC BFX93A VAC BFX93A VAC BFX93A VAC BFX93A VAC BFX93A VAC BFX93A NOTE: Other coil voltages and frequencies, add-on accessories, contact blocks are available. Contact Customer Service for part numbers, detailed information and technical data; see contact details on back cover.

4 Dimensions [mm (in)] ADD-ON BLOCKS ON CONTACTORS BGX... auxiliary contacts 82 (3.23 ) 26 (1.02 ) BGX50 00 interlock with BGX... and BGX77 or BGX78 or BGX79 suppressor 88 (3.46 ) 88 (3.46 ) 6 26 (1.02 ) BGX77 or BGX78 or BGX79... suppressor only 56 (2.20 ) 26 (1.02 ) 30 (1.18 ) 30 (1.18 ) 23.8 (0.94 ) BGX50 00 BGX... - BGX77... BGX BGX (0.30 ) BGX BGX78... BGX79... BGX80 00 cover SMX 22 rigid connectors with BGX50 00 interlock for reversing contactors 59 (2.32 ) 48.5 (1.91 ) 88 (3.46 ) 80 (3.15 ) Ø4 (0.16 ) 50 (1.97 ) SMX (0.28 ) BGX50 00 BGX (1.37 ) 7 (0.28 ) ADD-ON BLOCKS ON DPBF09-32 CONTACTORS Fourth pole BFX42 16 (0.63 ) 84.8 (3.34 ) Auxiliary contacts BFX... w/2 contacts 21.4 (0.84 ) 29 (1.14 ) BFX... w/4 contacts 42.8 (1.68 ) 36.5 (1. ) G w/1 contact 8 28 (1. ) 15.9 (0.62 ) ADD-ON BLOCKS ON DPBF50-80 CONTACTORS BFX BFX5301 interlock for reversing contactors BFX5303 interlock for reversing contactors 15 (0.59 ) 31.9 (1.15 ) 41 (1.61 ) 41.4 (1.63 ) 41.4 (1.63 ) 46 (1.81 ) BFX12... w/2 contacts 75.4 (2.97 ) 61.5 (2.42 ) 9.9 (0. ) G w/1 contact 9.5 (0.37 ) 57 (2.24 ) 12.3 (0.48 ) 51 (2.01 ) BFX50 00, BFX50 01 interlock BFX50 03 interlock 15 (0.59 ) 31.9 (1.15 ) 41 (1.61 ) BFX31 01 rigid connectors with interlock for reversing contactors Ø (0.16 ) BFX80 cover 4.5 BFX89 01 fixing base 14.5 Ø4.3 BFX89 02 fixing bracket 21 (0.83 ) 9.7 (0.38 ) 83 (3.27 ) 71 (2.79 ) 39.2 (1.54 ) 75 (2.95 ) Ø (1.25 ) 11.6 (0.46 ) 86 (3.38 ) 16 (0.63 ) BFX31 01 Ø4.3 Ø3.5 (0.14 )

5 Mounting combinations of add-on blocks and accessories TYPE Assembled as reversing contactors BGX77 BGX BGX79 SMX 22 BGX80 00 BGX 40 BGX 31 BGX 22 BGX 13 BGX 04 BGX 20 BGX 11 BGX 02 SMX 22 BGX 40 BGX 31 BGX 22 BGX 13 BGX 04 BGX 20 BGX 11 BGX 02 BGX50 00 BGX77 BGX BGX79 BGX77 BGX BGX79 BGX 40 BGX 31 BGX 22 BGX 13 BGX 04 BGX 20 BGX 11 BGX 02 DPBF TYPES BFX BFX BFX50 00 BFX50 01 (only for DPBF09-32 BFX53 00 BFX53 01 (only for DPBF50-80 BFX12... BFX77 BFX79 (only for DPBF09-32 ❶ DPBF ❶ G418 G G G (only for DPBF09-32 BFX42 (only for DPBF26 and DPBF32) BFX43 (only for DPBF50 and DPBF80) G428 ❶ BFX50 03 (only for DPBF09-32 BFX53 03 (only for DPBF50-80 ❶ Mounting not possible if front lateral contacts or mechanical interlocks BFX50.../G269 2 are mounted. ❷ Only for DPBF09-32 types. DPBF09-32 assembled as reversing contactors BFX50 03 BFX31 01 BFX31 02 BFX32 01 DPBF26-32 DPBF09-18 BFX80 BF...A BFX50 03 BFX31 01 BFX31 02 BFX32 01 BFX50 00 BFX50 01

6 Thermal overloads - Electrical and Mechanical Life Data Thermal overloads for DPBF types Single phase sensitive, three pole types For DPBF09-32 types Adjustment Catalog range number [A] MANUAL OR AUTOMATIC RESETTING. Direct mount on DPBF09-32❶ types. Independent mounting with RFX38 04 base RF RF RF RF RF RF RF RF ❶ If a range higher than 32-38A is required, the RF95 type needs to be considered; the links must be changed. Contact Customer Service for assistance and details; contact details are given at the bottom of the page. NOTE: Other adjustment ranges, non-single phase sensitive or 2-pole types and accessories are available, Contact Customer Service for part numbers and technical information; see contact details below. Electrical life MILLION CYCLES DPBF09A DPBF12A DPBF18A For DPBF50-80 types Adjustment Catalog range number [A] MANUAL RESETTING. Direct mount on DPBF50-80 types. Independent mounting with G270 base RF RF RF RF AUTOMATIC RESETTING. Direct mount on DPBF50-80 types. Independent mounting with G270 base. DPBF26A RFA RFA RFA RFA DPBF32A DPBF50 DPBF80 DIMENSIONS [mm (in)] with RF38 overload (4.96 ) (0.43 ) 14.6 DPBF50-80 contactors with RF82 overload 9 (0. ) 194 (7.64 ) 55 (2.16 ) 18.5 (0.73 ) Mechanical life 1 (4.33 ) 71 (2.79 ) 81 (3.19 ) RF (3.20 ) and DPBF09-32: 20 million cycles DPBF50-80: 15 million cycles. Ø (3.18 ) (4.51 ) Notes for installation For single or two-wire supply configurations with DP contactors, directly connect respectively to one or two contactor poles, leaving the others unwired. If a three-pole overload is installed with single-phase motors, the overload terminal L2 needs to be jumpered with terminal T3; the line is connected to L1-L3 terminals while the load (motor) to terminals T1 and T (5. ) 125 (4.92 ) The products described in this publication are subject to be revised or improved at any moment. Catalog descriptions and details, such as technical and operational data, drawings, diagrams and instructions, etc., do not have any contractual value. In addition, products should be installed and used by qualified personnel and in compliance with the regulations in force for electrical systems in order to avoid damages and safety hazards [A] LOVATO ELECTRIC CORP Avenue Jacques Bureau LAVAL QC H7P OA9 Canada Tel. (0) Fax (0) info@lovato.ca LOVATO ELECTRIC INC Georgetown Blvd. CHESAPEAKE, VA USA Tel. (757) Fax (757) info@lovatousa.com Follow us on PD85 CND USA 02 17