249.1 m3/h m3/h 7.23 MW m3/h 50.0 m3/h

Size: px
Start display at page:

Download "249.1 m3/h m3/h 7.23 MW m3/h 50.0 m3/h"

Transcription

1 No Filter 81.6 % Auto 9.1 m3/h m3/h Auto 99.7 m3/h m3/h Auto 91.3 m3/h 92.0 m3/h Auto 40.0 m3/h 7. MW Auto 50.7 m3/h 50.0 m3/h 7.2 % Auto.6 % 45.0 % ABB

2 NF Contactor Relays Overview...3 Ordering Details NF Contactor Relays...4 NFZ Contactor Relays - Low Consumption...5 Technical Data...6 Main Accessory Fitting Details...9 Accessory Ordering Details and Technical Data...10 Terminal Marking and Positioning... Dimensions...15 Index SBC S0201 ABB 1

3 2 ABB 1SBC S0201

4 Contactor Relays AC / DC control voltage NFE NF31E NF40E 2 N.O. + 2 N.C. 3 N.O. + 1 N.C. 4 N.O. NFE NFE NFE NFE 4 N.O. + 4 N.C. 5 N.O. + 3 N.C. 6 N.O. + 2 N.C. 7 N.O. + 1 N.C. NF80E 8 N.O. Control Circuit Switching Rated operational current 4A 3A 2A 6 A / 4 W 0.15 A / 60 W A600, Q600 0 V AC V IEC 690 V V DC- 400 V UL/CSA Pilot Duty Main Accessories Front mounting Auxiliary contact blocks 1-pole CA4-10 or CA4-01, CC4-10 or CC pole CA4 2-pole CAL4 Side mounting 1-stack contactor relay CA4 4-pole auxiliary contact block BX4-CA Protective cover CAL4 2-pole auxiliary contact block Top or bottom mounted coil terminal block CA4, CC4 1-pole auxiliary contact block 2-stack contactor relay BX4 Protective cover BX4-CA Protective cover 1SBC S0201 CAL4 2-pole auxiliary contact block Top or bottom mounted coil terminal block ABB 3

5 NF Contactor Relays AC / DC Operated - with Screw Terminals Catalogue Page 1SBC S0201 culus GOST C-Tick CE Application NF contactor relays are used for switching auxiliary and control circuits. Description NF contactor relays include an electronic coil interface accepting a wide control voltage U c min.... U c max. Only four coils cover control voltages between V 50/60 Hz or V DC NF contactor relays can manage large control voltage variations. One coil (e.g V 50/60 Hz - DC) can be used for different control voltages used worldwide without any coil change NF contactor relays have built-in surge protection and do not require additional surge suppressors The contactor relays have mechanically-linked auxiliary contacts compliant with Annex L of IEC and include the "Mechanically Linked" symbol on their side 8-pole contactor relays are mounted with a non-removable auxiliary contact block (2nd stack). Note: - NF..E-11 not suitable for a direct control by PLC-output. - NF..E-11 type available in some countries: please consult your ABB representative. NFE NFE Ordering Details Number of contacts Control voltage Type Order code Weight 1 st stack 2 nd stack U c min.... U c max Pack (ing) 1 piece V 50/60 Hz V DC kg NFE-11 1SBH R NFE-12 1SBH R NFE- 1SBH R NFE- 1SBH R NF31E-11 1SBH R NF31E-12 1SBH R NF31E- 1SBH R NF31E- 1SBH R NF40E-11 1SBH R NF40E-12 1SBH R NF40E- 1SBH R NF40E- 1SBH R NFE-11 1SBH R NFE-12 1SBH R NFE- 1SBH R NFE- 1SBH R NFE-11 1SBH R NFE-12 1SBH R NFE- 1SBH R NFE- 1SBH R NFE-11 1SBH R NFE-12 1SBH R NFE- 1SBH R NFE- 1SBH R NFE-11 1SBH R NFE-12 1SBH R NFE- 1SBH R NFE- 1SBH R NF80E-11 1SBH R NF80E-12 1SBH R NF80E- 1SBH R NF80E- 1SBH R Main Dimensions mm, inches NFE, NF31E, NF40E " NFE, NFE, NFE, NFE, NF80E " " 2.80" " 1.77" ø " 2 x M U 2.80" " ø " 6 0." 35 mm EN/IEC " 2.36" 6 0." " " 35 mm EN/IEC " " " " ABB

6 NFZ Contactor Relays - Low Consumption AC / DC Operated - with Screw Terminals Catalogue Page 1SBC S0201 culus GOST C-Tick CE Application NFZ contactor relays are used for switching auxiliary and control circuits. Description NFZ contactor relays include an electronic coil interface accepting a wide control voltage U c min.... U c max. and managing large control voltage variations. NFZ contactor relays cover control voltages between V 50/60 Hz or V DC NFZ contactor relays allow direct control by PLC-output V DC 500 ma and obtain a reduced holding coil consumption. NFZ contactor relays withstand short voltage dips and voltage sags (SEMI F compliance) NFZ contactor relays have built-in surge protection and do not require additional surge suppressors The contactor relays have mechanically-linked auxiliary contacts compliant with Annex L of IEC and include the "Mechanically Linked" symbol on their side 8-pole contactor relays are mounted with a non-removable auxiliary contact block (2 nd stack). NFZE NFZE Ordering Details Number of contacts Control voltage Type Order code Weight 1 st stack 2 nd stack U c min.... U c max Pack (ing) 1 piece V 50/60 Hz V DC kg NFZE-20 1SBH R NFZE- 1SBH R NFZE- 1SBH R NFZE- 1SBH R NFZ31E-20 1SBH R NFZ31E- 1SBH R NFZ31E- 1SBH R NFZ31E- 1SBH R NFZ40E-20 1SBH R NFZ40E- 1SBH R NFZ40E- 1SBH R NFZ40E- 1SBH R NFZE-20 1SBH R NFZE- 1SBH R NFZE- 1SBH R NFZE- 1SBH R NFZE-20 1SBH R NFZE- 1SBH R NFZE- 1SBH R NFZE- 1SBH R NFZE-20 1SBH R NFZE- 1SBH R NFZE- 1SBH R NFZE- 1SBH R NFZE-20 1SBH R NFZE- 1SBH R NFZE- 1SBH R NFZE- 1SBH R NFZ80E-20 1SBH R NFZ80E- 1SBH R NFZ80E- 1SBH R NFZ80E- 1SBH R Note: Only NFZ contactor relays with DC control voltage V DC need to respect the connection polarities indicated close to the coil terminals: + for the positive pole and - for the negative pole Main Dimensions mm, inches NFZE, NFZ31E, NFZ40E " NFZE, NFZE, NFZE, NFZE, NFZ80E " " 2.80" " 1.77" ø " 2 x M U 2.80" " " 6 0." 35 mm EN/IEC " 2.36" 6 0." " " 35 mm EN/IEC " " " " ABB 5

7 NF Contactor Relays Technical Data Catalogue Page 1SBC S0201 Contact Utilization Characteristics according to IEC Contactor relay types NF Standards IEC / and EN / Rated operational voltage U e max. 690 V Conventional free-air thermal current I th θ 40 C 16 A Rated frequency limits Hz Rated operational current I e / AC-15 acc. to IEC V 50/60 Hz 6 A 0-0 V 50/60 Hz 4 A V 50/60 Hz 3 A 500 V 50/60 Hz 2 A 690 V 50/60 Hz 2 A Making capacity AC x I e AC-15 acc. to IEC Breaking capacity AC x I e AC-15 acc. to IEC Rated operational current I e / DC- acc. to IEC V DC 6 A / 4 W 48 V DC 2.8 A / 4 W V DC 1 A / W 110 V DC 0.55 A / 60 W 125 V DC 0.55 A / 69 W 0 V DC 0.27 A / 60 W 250 V DC 0.27 A / 68 W 400 V DC 0.15 A / 60 W 500 V DC 0. A / 65 W 600 V DC 0.1 A / 60 W Short-circuit protection gg type fuse 10 A Rated short-time withstand current I cw for 1.0 s 100 A for 0.1 s 0 A Minimum switching capacity 12 V / 3 ma with failure rate acc. to IEC Non-overlapping time between N.O. and N.C. contacts 2 ms Heat dissipation per pole at 6 A 0.1 W Max. electrical switching frequency AC cycles/h DC- 900 cycles/h Main Pole - Utilization Characteristics according to UL / CSA Contactor relay types NF Standards UL 508, CSA C.2 N Rated insulation voltage U i 600 V Max. rated voltage 600 V AC, 600 V DC Pilot duty A600, Q600 AC thermal rated current 10 A AC maximum volt-ampere making 00 VA AC maximum volt-ampere breaking 0 VA DC thermal rated current 2.5 A DC maximum volt-ampere making-breaking 69 VA 6 ABB

8 NF Contactor Relays Technical Data Catalogue Page 1SBC S0201 General Technical Data Contactor relay types Rated insulation voltage U i acc. to IEC acc. to UL / CSA Rated impulse withstand voltage U imp Electromagnetic compatibility Ambient air temperature close to contactor Operation in free air C Storage C Climatic withstand Operating altitude Mechanical durability Number of operating cycles Max. switching frequency Shock withstand acc. IEC and EN Mounting position 1 C1 Closed or open position A A B1 Vibration withstand acc. to IEC C2 B2 Shock direction A B1 B2 C1 C2 NF 690 V 600 V 6 kv Devices complying with IEC / EN Environment A Category B according to IEC Annex Q 3000 m 20 millions operating cycles 6000 cycles/h 1/2 sinusoidal shock for 11 ms: no change in contact position 30 g 25 g Closed position / 5 g Open position 15 g 25 g 25 g Hz 4 g Closed position / 2 g Open position Magnet System Characteristics Contactor relay types NF Coil operating limits AC supply at θ 60 C 0.85 x U c min x U c max acc. to IEC at θ 70 C 0.85 x U c min... U c max DC supply at θ 60 C 0.85 x U c min x U c max at θ 70 C (NF) 0.85 x U c min... U c max - (NFZ) 0.85 x U c min x U c max AC control voltage Rated control circuit voltage U c V AC 50/60 Hz Coil consumption Average pull-in value (NF) 50 VA - (NFZ) 16 VA Average holding value (NF) 2.2 VA / 2 W - (NFZ) 1.7 VA / 1.5 W DC control voltage Rated control circuit voltage U c V DC Coil consumption Average pull-in value (NF) 50 W - (NFZ) W Average holding value (NF) 2 W - (NFZ) 1.7 W PLC-Output control (NFZ) 500 ma V DC Drop-out voltage in % of U c min. 60 % U c min Voltage sag immunity according to SEMI F (NFZ) conditions of use on request Dips withstand (level 0% according to IEC ) (NFZ) ms average for U c = V 50/60Hz -20 C θ +60 C Operating time between coil energization and: N.O. contact closing ms N.C. contact opening ms between coil de-energization and: N.O. contact opening ms N.C. contact closing ms Mounting Characteristics Contactor relay types Mounting positions NF Pos Pos. 4 Pos. 3 Pos. 1 Pos. 1 ± 30 Pos. 5 Mounting distances Fixing on rail according to IEC 605, EN 605 by screws (not supplied) Max. add-on N.C. auxiliary contacts: see accessory fitting details for a NF contactor relay The contactor relays can be assembled side by side. 35 x 7.5 mm or 35 x 15 mm 2 x M4 screws placed diagonally ABB 7

9 NF Contactor Relays Technical Data Catalogue Page 1SBC S0201 Connecting Characteristics Contactor relay types Main terminals NF Screw terminals with cable clamp Connecting capacity (min.... max.) Pole and coil terminals Rigid 1 x mm² 2 x mm² Flexible with non insulated ferrule 1 x mm² 2 x mm² Flexible with insulated ferrule 1 x mm² 2 x mm² L Bars or lugs L < 8 mm 6 Capacity according to UL/CSA 1 or 2 x AWG Stripping length 10 mm Degree of protection acc. to IEC / EN and IEC / EN All terminals IP20 Screw terminals (delivered in open position, screws of unused terminals must be tightened) All terminals M3.5 Screwdriver type Flat Ø 5.5 / Pozidriv 2 Tightening torque Pole terminals 1.2 Nm / 11 lb.in Coil terminals 1.2 Nm / 11 lb.in 8 ABB

10 NF Contactor Relays Main Accessories Catalogue Page 1SBC S0201 Accessory fitting details for a NF contactor relay Many configurations of accessories are possible depending on whether these are front-mounted or side-mounted. Contactor relay types Main poles Front-mounted accessories Auxiliary contact blocks Side-mounted accessories Auxiliary contact blocks 1-pole CA4 Left side Right side 1-pole CC4 4-pole CA4 2-pole CAL4-11 Max. add-on N.C. auxiliary contacts: 3 N.C. max. on positions 1, 2, 3, 4 and 2 N.C. max. on positions 1 ±30, 5 NF E 4 max. or NF E 2 max NF E Max. add-on N.C. auxiliary contacts: 4 N.C. max. on positions 1, 2, 3, 4 and 3 N.C. max. on positions 1 ±30, 5 4 max. or max NF E NF E NF E 1 NF E NF E Mounting positions Pos Pos. 4 Pos. 3 Pos. 1 Pos. 1 ± 30 Pos. 5 Contactor relays and main accessories (other accessories available) NF contactor relay 2-pole CAL pole CA4 1-pole CA4, CC4 ABB 9

11 Auxiliary Contact Blocks Accessories for NF Contactor Relays Catalogue Page 1SBC S0201 Application The auxiliary contact blocks are used for the operation of auxiliary circuits and control circuits. CA4-10 Description Types of auxiliary contact blocks for standard industrial environments: CA4 1 or 4-pole block, front-mounted, instantaneous with N.O., N.C. contacts. CC4 1-pole block, front-mounted, with N.O. leading contact or N.C. lagging contact. CAL4 2-pole block instantaneous N.O. + N.C. contacts clipped onto the right and/or left side of the contactors. The auxiliary contact blocks are equipped with screw type connecting terminals delivered open, protected against accidental direct contact and bear the corresponding function marking. Fitting Details - For each contactor relay type, refer to "Accessory Fitting Details" table. CA4-N Ordering Details For contactor relays Auxiliary contacts Type Order code Pack (ing) Weight pieces kg (1 pce) CAL4-11 Front-mounted instantaneous auxiliary contact blocks 4-pole NF CA4-10 1SBN R CA4-10-T 1SBN T CA4-01 1SBN R CA4-01-T 1SBN T CA4-40N 1SBN R CA4-31N 1SBN R CA4-N 1SBN R CA4-N 1SBN R NF..40E CA4-04N 1SBN R Front-mounted auxiliary contact blocks with N.O. leading contact and N.C. lagging contact 4-pole NF CC4-10 1SBN R CC4-01 1SBN R Side-mounted instantaneous auxiliary contact blocks NF CAL4-11 1SBN R CAL4-11-T 1SBN T ABB

12 Auxiliary Contact Blocks Accessories for NF Contactor Relays Catalogue Page 1SBC S0201 Technical Data Types 1-pole CA4, 1-pole CC4, 4-pole CA4, 2-pole CAL4 Contact Utilization Characteristics according to IEC Standards IEC and EN Rated insulation voltage U i acc. to IEC V Rated impulse withstand voltage U imp 6 kv Rated operational voltage U e max V Conventional thermal current I th - θ 40 C 16 A Rated frequency limits Hz Rated operational current I e / AC V 50/60 Hz 6 A acc. to IEC V 50/60 Hz 4 A V 50/60 Hz 3 A 500 V 50/60 Hz 2 A 690 V 50/60 Hz 2 A Making capacity acc. to IEC x I e AC-15 acc. to IEC Breaking capacity acc. to IEC x I e AC-15 acc. to IEC Rated operational current I e / DC- V DC 6 A / 4 W acc. to IEC V DC 2.8 A / 4 W V DC 1 A / W 110 V DC 0.55 A / 60 W 125 V DC 0.55 A / 69 W 0 V DC 0.27 A / 60 W 250 V DC 0.27 A / 68 W 400 V DC 0.15 A / 60 W 500 V DC 0. A / 65 W 600 V DC 0.1 A / 60 W Short-circuit protection gg type fuse 10 A Rated short-time withstand current Icw for 1.0 s 100 A θ = 40 C for 0.1 s 0 A Minimum switching capacity 12 V / 3 ma with failure rate acc. to IEC Heat dissipation per pole at 6 A 0.1 W Mechanical durability Number of operating cycles 10 millions operating cycles Max. switching frequency 3600 cycles/h Max. electrical switching frequency for AC cycles/h for DC- 900 cycles/h Contact Utilization Characteristics according to UL/CSA Standards UL 508, CSA C.2 N Rated insulation voltage U i 600 V Max. rated voltage 600 V AC, 600 V DC Pilot duty A600, Q600 AC thermal rated current 10 A AC maximum volt-ampere making 00 VA AC maximum volt-ampere breaking 0 VA DC thermal rated current 2.5 A DC maximum volt-ampere making-breaking 69 VA Connecting Characteristics Screw terminals (delivered in open position, screws of unused terminals must be tightened) All terminals M3.5 Connecting capacity (min.... max.) Rigid solid 1 x mm² 2 x mm² Flexible with non insulated ferrule 1 x mm² 2 x mm² Flexible with insulated ferrule 1 x mm² 2 x mm² L Bars or lugs L < 8 mm 6 Capacity acc. to UL/CSA 1 or 2 x AWG Stripping length 10 mm Degree of protection acc. to IEC / EN and IEC / EN IP20 Screwdriver type Flat Ø5.5 / Pozidriv 2 Tightening torque 1.2 Nm / 11 lb.in ABB 11

13 Other Accessories Accessories for NF Contactor Relays Catalogue Page 1SBC S0201 Additional coil terminal block Description Additional coil terminal block for a bottom access to the coil terminals of contactors or contactor relays. LDC4 Ordering Details For contactor relays Type Order code Pack (ing) Weight pieces NF LDC4 1SBN T kg (1 pce) Protective covers Description Sealable and transparent protective covers BX4 and non-removable BX4-CA to protect the devices against accidental contact. BX4 Ordering Details For contactor relays Type Order code Pack (ing) Weight pieces All 1-stack contactor relays BX4 1SBN T For 4-pole CA4 auxiliary contact blocks BX4-CA 1SBN W kg (1 pce) BX4-CA Function markers Description Box of 16 blank cards (16 markers by card) printable on HTP500 thermal transfer printer and AMS 500 marking table to identify your contactors, overload relays or manual motor starters. Marker dimensions: 7 x 20 mm (.276" x.787") BA4 Ordering Details For contactor relays Type Order code Pack (ing) Weight pieces Marker card BA4 1SNA R AMS 500 support plate for 8 BA4 SPRC 1 1SNA R HTP500 support plate HTP500-BA4 1SNA 5 2 R kg (1 pce) Main Dimensions mm, inches BX " 6 0." " 12 ABB

14 NF Contactor Relays Terminal Marking and Positioning Catalogue Page 1SBC S0201 Standard devices without addition of auxiliary contacts NF..E NF..31E NF..40E NF..E NF..E NF..E NF..31E NF..E NF..40E NF..E NF..E NF..E NF..E NF..80E NF..E NF..80E Other possible contact combinations with auxiliary contacts added by the user 5- = + 5 Combination 41 = CA = Combination 42 = = + X X Combination 51 = CAL NF..40E + -2 CA4-01+ CA4-01 Combination = NF..40E Combination 41 E Combination 42 E X X X X X X NF..40E X -4 X = X 51 X -3 NF..31E Combination 51 E + CA4-N Combination E Note: Only NFZ contactor relays with DC control voltage V DC need to respect the connection polarities indicated close to the coil terminals: + for the positive pole and - for the negative pole. ABB

15 NF Add-on Auxiliary Contacts Terminal Marking and Positioning Catalogue Page 1SBC S pole auxiliary contacts CA4-01 CA4-10 CC4-01 CC pole auxiliary contacts X / X X / 32X 31X / X X / X X / X X / 31X 32X / X X / X CAL4-11 (Left side-mounted) CAL4-11 (Right side-mounted) 4-pole auxiliary contacts CA4-N CA4-40N CA4-31N CA4-N CA4-04N ABB

16 NF Contactor Relays AC / DC Operated - with Screw Terminals Catalogue Page 1SBC S0201 Dimensions mm, inches " " 2.80" " ø " 2 x M U " 6 0." 35 mm EN/IEC " " " " " NF..E, NF..31E, NF..40E NF " " " 2.80" " " " 2.80" " 6 0." 35 mm EN/IEC " " 6 0." 35 mm EN/IEC 605 NF..E, NF..31E, NF..40E + CA4, CC4 1-pole auxiliary contact block NF..E, NF..31E, NF..40E + CAL pole auxiliary contact block " " " " 2.80" " " 2.80" " " 6 0." 35 mm EN/IEC " " 6 0." 35 mm EN/IEC " NF..E, NF..31E, NF..40E + CA4 4-pole auxiliary contact block NF..E, NF..E, NF..E, NF..E, NF..80E Note: contactor relay lateral distance to grounded component 2 mm 0.08" min. ABB 15

17 Index Order Code Classification Order code Type Page Order code Type Page Order code Type Page Order code Type Page 1SBH R20 NFZE SBH R2031 NFZ31E SBH R2040 NFZ40E SBH R20 NFZE SBH R20 NFZE SBH R20 NFZE SBH R20 NFZE SBH R2080 NFZ80E SBH R NFZE- 5 1SBH R NFZ31E- 5 1SBH R20 NFZ40E- 5 1SBH R NFZE- 5 1SBH R NFZE- 5 1SBH R NFZE- 5 1SBH R NFZE- 5 1SBH R80 NFZ80E- 5 1SBH R NFZE- 5 1SBH R NFZ31E- 5 1SBH R20 NFZ40E- 5 1SBH R NFZE- 5 1SBH R NFZE- 5 1SBH R NFZE- 5 1SBH R NFZE- 5 1SBH R80 NFZ80E- 5 1SBH R NFZE- 5 1SBH R NFZ31E- 5 1SBH R20 NFZ40E- 5 1SBH R NFZE- 5 1SBH R NFZE- 5 1SBH R NFZE- 5 1SBH R NFZE- 5 1SBH R80 NFZ80E- 5 1SBH R11 NFE SBH R11 NF31E SBH R10 NF40E SBH R14 NFE SBH R11 NFE SBH R11 NFE SBH R11 NFE SBH R1180 NF80E SBH R12 NFE SBH R11 NF31E SBH R10 NF40E SBH R12 NFE SBH R12 NFE SBH R12 NFE SBH R12 NFE SBH R1280 NF80E SBH R NFE- 4 1SBH R31 NF31E- 4 1SBH R40 NF40E- 4 1SBH R NFE- 4 1SBH R NFE- 4 1SBH R NFE- 4 1SBH R NFE- 4 1SBH R80 NF80E- 4 1SBH R NFE- 4 1SBH R11 NF31E- 4 1SBH R40 NF40E- 4 1SBH R NFE- 4 1SBH R NFE- 4 1SBH R NFE- 4 1SBH R NFE- 4 1SBH R80 NF80E- 4 1SBN R1001 CA SBN R1010 CA SBN T1001 CA4-01-T 10 1SBN T1010 CA4-10-T 10 1SBN R1001 CC SBN R1010 CC SBN R1011 CAL SBN T1011 CAL4-11-T 10 1SBN R1204 CA4-04N 10 1SBN R12 CA4-N 10 1SBN R12 CA4-N 10 1SBN R11 CA4-31N 10 1SBN R10 CA4-40N 10 1SBN T1000 LDC4 12 1SBN T1000 BX4 12 1SBN W1000 BX4-CA 12 1SNA R2700 BA4 12 1SNA 5 2 R00 HTP500-BA4 12 1SNA R1500 SPRC ABB

18 Index Type Classification Type Order code Page Type Order code Page Type Order code Page Type Order code Page BA4 1SNA R BX4 1SBN T BX4-CA 1SBN W CA4-01 1SBN R CA4-01-T 1SBN T CA4-04N 1SBN R CA4-10 1SBN R CA4-10-T 1SBN T CA4-N 1SBN R12 10 CA4-N 1SBN R12 10 CA4-31N 1SBN R11 10 CA4-40N 1SBN R10 10 CAL4-11 1SBN R CAL4-11-T 1SBN T CC4-01 1SBN R CC4-10 1SBN R HTP500-BA4 1SNA 5 2 R00 12 LDC4 1SBN T NFE-11 1SBH R11 4 NFE-12 1SBH R12 4 NFE- 1SBH R 4 NFE- 1SBH R 4 NF31E-11 1SBH R11 4 NF31E-12 1SBH R11 4 NF31E- 1SBH R31 4 NF31E- 1SBH R11 4 NF40E-11 1SBH R10 4 NF40E-12 1SBH R10 4 NF40E- 1SBH R40 4 NF40E- 1SBH R40 4 NFE-11 1SBH R14 4 NFE-12 1SBH R12 4 NFE- 1SBH R 4 NFE- 1SBH R 4 NFE-11 1SBH R11 4 NFE-12 1SBH R12 4 NFE- 1SBH R 4 NFE- 1SBH R 4 NFE-11 1SBH R11 4 NFE-12 1SBH R12 4 NFE- 1SBH R 4 NFE- 1SBH R 4 NFE-11 1SBH R11 4 NFE-12 1SBH R12 4 NFE- 1SBH R 4 NFE- 1SBH R 4 NF80E-11 1SBH R NF80E-12 1SBH R NF80E- 1SBH R80 4 NF80E- 1SBH R80 4 NFZE-20 1SBH R20 5 NFZE- 1SBH R 5 NFZE- 1SBH R 5 NFZE- 1SBH R 5 NFZ31E-20 1SBH R NFZ31E- 1SBH R 5 NFZ31E- 1SBH R 5 NFZ31E- 1SBH R 5 NFZ40E-20 1SBH R NFZ40E- 1SBH R20 5 NFZ40E- 1SBH R20 5 NFZ40E- 1SBH R20 5 NFZE-20 1SBH R20 5 NFZE- 1SBH R 5 NFZE- 1SBH R 5 NFZE- 1SBH R 5 NFZE-20 1SBH R20 5 NFZE- 1SBH R 5 NFZE- 1SBH R 5 NFZE- 1SBH R 5 NFZE-20 1SBH R20 5 NFZE- 1SBH R 5 NFZE- 1SBH R 5 NFZE- 1SBH R 5 NFZE-20 1SBH R20 5 NFZE- 1SBH R 5 NFZE- 1SBH R 5 NFZE- 1SBH R 5 NFZ80E-20 1SBH R NFZ80E- 1SBH R80 5 NFZ80E- 1SBH R80 5 NFZ80E- 1SBH R80 5 SPRC 1 1SNA R ABB 17

19 Contact us ABB France Low Voltage Products Division 10, rue Ampère Z.I. - B.P. 1 F Chassieu cedex / France ABB STOTZ-KONTAKT GmbH Eppelheimer Straße 82 D-691 Heidelberg / Germany ABB AB/ Cewe-Control Motorgränd 20 S-1 Västerås / Sweden You can find the address of your local sales organisation on the ABB home page -> Low Voltage products Note We reserve the right to make technical changes or modify the contents of this document without prior notice. With regard to purchase orders, the agreed particulars shall prevail. ABB does not accept any responsibility whatsoever for potential errors or possible lack of information in this document. We reserve all rights in this document and in the subject matter and illustrations contained therein. Any reproduction, disclosure to third parties or utilization of its contents in whole or in parts is forbidden without prior written consent of ABB. Copyright 2010 ABB All rights reserved DOC 1SBC100156C Printed in France (PDF Imprimeur)

NF31E-.. / NFZ31E-.. Contactor Relays AC / DC Operated - with Screw Terminals

NF31E-.. / NFZ31E-.. Contactor Relays AC / DC Operated - with Screw Terminals Technical Datasheet 1SBC101428D0201 28/03/11 -.. / NFZ31E-.. Contactor Relays AC / DC Operated - with Screw Terminals NF(Z) contactor relays are used for switching auxiliary and control circuits. NF(Z)

More information

AF / AF30Z stack 3-pole Contactors AC / DC Operated - with Screw Terminals

AF / AF30Z stack 3-pole Contactors AC / DC Operated - with Screw Terminals Technical Datasheet 1SBC101415D0201 25/03/11 AF30-30-11-.. / AF30Z-30-11-.. 2-stack 3-pole Contactors AC / DC Operated - with Screw Terminals AF30(Z) contactors are used for controlling power circuits

More information

AF / AF09Z pole Contactors AC / DC Operated - with Screw Terminals

AF / AF09Z pole Contactors AC / DC Operated - with Screw Terminals Technical Datasheet SBC042D020 06/04/ -22-00-.. / Z-22-00-.. 4-pole Contactors AC / DC Operated - with Screw Terminals (Z) contactors are used for controlling power circuits up to 690 V AC and 440 V DC.

More information

AF / AF09Z pole Contactors AC / DC Operated - with Screw Terminals

AF / AF09Z pole Contactors AC / DC Operated - with Screw Terminals Technical Datasheet 1SBC101419D0201 06/04/11-40-00-.. / Z-40-00-.. 4-pole Contactors AC / DC Operated - with Screw Terminals (Z) contactors are used for controlling power circuits up to 690 V AC and 440

More information

AF / AF16Z pole Contactors AC / DC Operated - with Screw Terminals

AF / AF16Z pole Contactors AC / DC Operated - with Screw Terminals Technical Datasheet 1SBC101408D0201 25/03/11-30-01-.. / Z-30-01-.. 3-pole Contactors AC / DC Operated - with Screw Terminals (Z) contactors are used for controlling power circuits up to 690 V AC and 220

More information

AF / AF38Z pole Contactors AC / DC Operated - with Screw Terminals

AF / AF38Z pole Contactors AC / DC Operated - with Screw Terminals Technical Datasheet 1SBC101412D0201 25/03/11-30-00-.. / Z-30-00-.. 3-pole Contactors AC / DC Operated - with Screw Terminals (Z) contactors are used for controlling power circuits up to 690 V AC and 220

More information

AF / AF12Z pole Contactors AC / DC Operated - with Screw Terminals

AF / AF12Z pole Contactors AC / DC Operated - with Screw Terminals Technical Datasheet 1SBC101404D0201 24/03/11-30-10-.. / Z-30-10-.. 3-pole Contactors AC / DC Operated - with Screw Terminals (Z) contactors are used for controlling power circuits up to 690 V AC and 220

More information

AF09... AF38 4-pole Contactors AC / DC Operated - with Screw Terminals

AF09... AF38 4-pole Contactors AC / DC Operated - with Screw Terminals AF09... AF38 4-pole Contactors AC / DC Operated - with Screw Terminals 25 to 55 A culus CE Application AF09... AF38 4-pole contactors are used for controlling power circuits up to 600 V AC and 240 V DC.

More information

AF09... AF30 3-pole Contactors up to 25 HP / 600 VAC

AF09... AF30 3-pole Contactors up to 25 HP / 600 VAC AF09... AF0 -pole Contactors up to 25 HP / 600 VAC Contactors and Overload Relays Overview.../0 AF09... AF0 -pole Contactors.../2 Main Technical Data.../8 Main Accessory Fitting Details.../2 Main Accessory.../24

More information

Short form catalogue. Motor protection & control

Short form catalogue. Motor protection & control Short form catalogue Star Series Motor protection & control Motor Protection and Control up to 25 HP / 600 VAC Overview...2 Contactors and Overload Relays...11 4-pole Contactors...41 Control Relays...59

More information

NSL..S 4-pole / 8-pole Contactor Relays - Spring Terminals

NSL..S 4-pole / 8-pole Contactor Relays - Spring Terminals NSL..S 4-pole / 8-pole Contactor Relays - Spring DC Operated Description - 1-stack contactor relays: 4-pole, - 2-stack contactor relays: 8-pole, - Mechanically linked contact elements available, - Low

More information

AF40... AF96 3-pole contactors Technical data

AF40... AF96 3-pole contactors Technical data Main pole - Utilization characteristics according to IEC Standards IEC 60947- / 60947-4- and EN 60947- / 60947-4- Rated operational voltage Ue max. 690 V Rated frequency (without derating) 50 / 60 Hz Conventional

More information

Contact us. ABB France Electrification Products Division Low Voltage Products and Systems 3, rue Jean Perrin F Chassieu cedex / France

Contact us. ABB France Electrification Products Division Low Voltage Products and Systems 3, rue Jean Perrin F Chassieu cedex / France Contact us ABB France Electrification Products Division Low Voltage Products and Systems 3, rue Jean Perrin F-69687 Chassieu cedex / France You can find the address of your local sales organisation on

More information

AF09... AF30 3-pole Contactors up to 20 HP / 480 VAC

AF09... AF30 3-pole Contactors up to 20 HP / 480 VAC AF0... AF0 -pole Contactors up to 20 HP / 480 VAC Contactors and Overload Relays Overview...2 AF0... AF0 -pole Contactors Ordering Details...4 Main Technical Data...20 DC Circuit switching...2 Main Accessory

More information

AF40... AF96 3-pole contactors 30 to 60 hp at 480 V AC AC / DC operated with 1 N.O. + 1 N.C. auxiliary contacts

AF40... AF96 3-pole contactors 30 to 60 hp at 480 V AC AC / DC operated with 1 N.O. + 1 N.C. auxiliary contacts AF4... AF96 -pole contactors to 6 hp at 48 V AC AC / DC operated with N.O. N.C. auxiliary contacts Description AF4... AF96 contactors are mainly used for controlling -phase motors and power circuits up

More information

ASL09..S 3-pole Contactors - Spring Terminals

ASL09..S 3-pole Contactors - Spring Terminals 4 kw 5 hp ASL09..S 3-pole Contactors - Spring DC Operated Description - 3-pole contactors with spring terminals, - N.C. or N.O. built-in auxiliary contact, - Low coil consumption, - Polarity on the coil

More information

AE 9... AE 40 Contactors NE... Contactor Relays

AE 9... AE 40 Contactors NE... Contactor Relays Technical data AE 9... AE 0 Contactors NE... Contactor Relays AE 9... AE 0 Contactors NE.. Contactor Relays Contents AE 9... AE 0 Contactors Description... 2 Ordering Details... 3 Technical Data... Terminal

More information

Electronic overload relay EF65, EF96 and EF146

Electronic overload relay EF65, EF96 and EF146 Data sheet Electronic overload relay EF65, EF96 and EF146 Electronic overload relays are the alternative to the thermal overload relays. An electronic overload relay offers reliable and fast protection

More information

Electronic overload relays EF205 and EF370

Electronic overload relays EF205 and EF370 Data sheet Electronic overload relays EF205 and EF370 Electronic overload relays offer reliable protection in case of overload and phase-failure. They are the alternative to thermal overload relays. Motor

More information

Star Series Motor protection & control

Star Series Motor protection & control Contact us ABB Inc. Low Voltage Control Products 16250 W. Glendale Drive New Berlin, WI 53151 Phone: 888-385-1221 Fax: 800-726-41 USA Technical support & Customer Service: 888-385-1221, Option 4 7:30AM

More information

Mini contactors B6, BC6 with 3 pole

Mini contactors B6, BC6 with 3 pole Data sheet Mini contactors B6, BC6 with 3 pole Mini contactors from ABB are used for remotely ling motors and other loads wherever space is at a premium. These devices feature hum free coils, shallow depth,

More information

TAE pole Contactors

TAE pole Contactors TAE9...26 3-pole Contactors d.c. operated with double-winding coil SB8033C3 Utilisation TAE9 to TAE26 contactors are a compliment to the DC control contactor range. The coils have large voltage ranges

More information

B6, B7, BC6, BC7, TBC7 3- and 4-pole mini contactors VB6, VB7, VBC6, VBC7 3- and 4-pole mini reversing contactors Technical data

B6, B7, BC6, BC7, TBC7 3- and 4-pole mini contactors VB6, VB7, VBC6, VBC7 3- and 4-pole mini reversing contactors Technical data B6, B7, BC6, BC7, TBC7 - and 4-pole mini contactors VB6, VB7, VBC6, VBC7 - and 4-pole mini reversing contactors Main pole Utilization characteristics according to IEC Standards IEC/EN 60947-1, IEC/EN 60947-4-1

More information

Thermal overload relay TF65 and TF96

Thermal overload relay TF65 and TF96 Data sheet Thermal overload relay TF65 and TF96 Thermal overload relays are economic electromechanical protection devices for the main circuit. They are used mainly to protect motors against overload and

More information

VB6, VB7 3-pole mini reversing contactors with screw terminals 4 to 5.5 kw AC operated

VB6, VB7 3-pole mini reversing contactors with screw terminals 4 to 5.5 kw AC operated VB6, VB7 -pole mini reversing contactors with screw terminals 4 to 5.5 kw AC operated VB7-0-10 2CDC211006F0011 Description VB6, VB7 -pole compact design reversing contactors are space optimized control

More information

Thermal overload relay TF140DU and TF140DU-V1000

Thermal overload relay TF140DU and TF140DU-V1000 Data sheet Thermal overload relay TF140DU and TF140DU-V1000 Thermal overload relays are economic electromechanical protection devices for the main circuit. They are used mainly to protect motors against

More information

Manual motor starter magnetic only MO325

Manual motor starter magnetic only MO325 Data sheet Manual motor starter magnetic only MO325 Manual motor starters magnetic only are electromechanical protection devices for the main circuit. They are used mainly to switch motors manually ON/OFF

More information

Panorama. Contactors Motor protection Accessories

Panorama. Contactors Motor protection Accessories Panorama Contactors Motor protection Accessories Extensive range of contactors High performance contactors for your applications from 9 to 5000 A Mini contactors for compact equipments - up to 5.5 kw /

More information

Manual motor starter MS116

Manual motor starter MS116 Data sheet Manual motor starter MS116 Manual motor starters are electromechanical protection devices for the main circuit. They are used mainly to switch motors manually ON/OFF and protect them fuse less

More information

Manual motor starter MS132

Manual motor starter MS132 Data sheet Manual motor starter MS132 Manual motor starters are electromechanical protection devices for the main circuit. They are used mainly to switch motors manually ON/OFF and protect them fuse less

More information

Manual motor starter MS116

Manual motor starter MS116 Data sheet Manual motor starter MS116 Manual motor starters are electromechanical protection devices for the main circuit. They are used mainly to switch motors manually ON/OFF and protect them fuse less

More information

Manual motor starter MS132

Manual motor starter MS132 Data sheet Manual motor starter MS132 Manual motor starters are electromechanical protection devices for the main circuit. They are used mainly to switch motors manually ON/OFF and protect them fuse less

More information

Description. Positive safety relays

Description. Positive safety relays Type N & KC Positive safety Description A.C. or D.C. operated DIN rail or panel mounting 600 volt heavy duty design, A600-10 amp, Q300-5 amp Snap-on accessories available: 1 & 4 pole adder deck Pneumatic

More information

Manual motor starter MS132

Manual motor starter MS132 Data sheet Manual motor starter MS132 Manual motor starters are electromechanical protection devices for the main circuit. They are used mainly to switch motors manually ON/OFF and protect them fuse less

More information

Auxiliary contact blocks - with spring terminals Accessories

Auxiliary contact blocks - with spring terminals Accessories Auxiliary contact blocks - with spring terminals Accessories CA3-10S 1SBC101037F0014 Description The auxiliary contact blocks are used for the operation of auxiliary circuits and control circuits. CA3

More information

Brochure. Motor protection and control DRAS enclosed direct-on-line starters

Brochure. Motor protection and control DRAS enclosed direct-on-line starters Brochure Motor protection and control DRS enclosed direct-on-line starters DRS09 DRS16 enclosed direct-on-line starters 4 to 7.5 kw, protected by thermal overload relays C or DC operated DRS + T16 to

More information

System pro M compact Supplementary protector S 200 PR for ring-tongue applications acc. to UL1077

System pro M compact Supplementary protector S 200 PR for ring-tongue applications acc. to UL1077 Data Sheet System pro M compact Supplementary protector S 200 PR for ring-tongue applications acc. to UL1077 2CDC021026S0011 2CDC021016S0012 The S 200 PR is a high-performance supplementary protector with

More information

UL & CSA Technical data A/AE9 A/AE/AF110, AL9 AL40 AC & DC operated

UL & CSA Technical data A/AE9 A/AE/AF110, AL9 AL40 AC & DC operated 11Across the line UL & CSA Technical data A/AE9 A/AE/AF110, AL9 AL40 AC & DC operated contactor frame size A/AE/AL A/AE/AL A/AE/AL A/AE/AL A/AE/AL A/AE/AL A/AE/AF A/AE/AF A/AE/AF A/AE/AF A/AE/AF A/AE/AF

More information

ZS4-SF1-R Screw Clamp Terminal Blocks For 5 x 20 and 5 x 25 fuses - with blown fuse indicator

ZS4-SF1-R Screw Clamp Terminal Blocks For 5 x 20 and 5 x 25 fuses - with blown fuse indicator Technical Datasheet SNK63D00 Catalogue Page SNK63S00 ZS-SF-R Screw Clamp Terminal Blocks For x 0 and x fuses - with blown fuse indicator - Protect your circuit with x and x0 fuse terminal blocks (fuse

More information

ZS4-T3 Screw Clamp Terminal Blocks Triple deck with 3 feed-through circuits

ZS4-T3 Screw Clamp Terminal Blocks Triple deck with 3 feed-through circuits Technical Datasheet 1SNK1107D001 Catalogue Page 1SNK1107S001 ZS4-T Screw Clamp Terminal Blocks Triple deck with feed-through circuits Save space: independent circuits in just. mm 0.0 in spacing, - Fit

More information

Contactors type AF1350-AF1650

Contactors type AF1350-AF1650 Contactors type AF1350-AF1650 a.c./d.c. Operated - Wide voltage range Electronic Coil Interface Application The AF1350 and 1650 are compact 3-pole contactors designed for AC-1 applications, but can also

More information

ZS4-S Screw Clamp Terminal Blocks Disconnect with blade

ZS4-S Screw Clamp Terminal Blocks Disconnect with blade Technical Datasheet SNK6D00 Catalogue Page SNK6S00 ZS4-S Screw Clamp Terminal Blocks Disconnect with blade - Ease your disconnect operations with the disconnect blade operated by hand or with a screwdriver,

More information

ZS4-SF1-R Screw Clamp Terminal Blocks For 5 x 20 and 5 x 25 fuses - with blown fuse indicator

ZS4-SF1-R Screw Clamp Terminal Blocks For 5 x 20 and 5 x 25 fuses - with blown fuse indicator Technical Datasheet SNK63D00 Catalogue Page SNK63S00 ZS-SF-R Screw Clamp Terminal Blocks For x 0 and x fuses - with blown fuse indicator - Protect your circuit with x and x0 fuse terminal blocks (fuse

More information

Thermal Overload Relays

Thermal Overload Relays Data Sheet Thermal Overload Relays Ex9RD Series Ex9RD93 Ex9RD25 www.noarkusa.com NOARK Ex9RD Series Thermal overload relays are economic electromechanical protection devices for the main circuit. They

More information

ZS4-PE Screw Clamp Terminal Blocks Ground

ZS4-PE Screw Clamp Terminal Blocks Ground Technical Datasheet SNK60D0 Catalogue Page SNK60S0 ZS4-PE Screw Clamp Terminal Blocks Ground Improve the safety of your installation in the event of a short-circuit thanks to our screwless rail contact:

More information

ZK2.5-SP-4P PI-Spring Terminal Blocks Disconnect with plug - with test socket

ZK2.5-SP-4P PI-Spring Terminal Blocks Disconnect with plug - with test socket Technical Datasheet 1SNK1659D01 Catalogue Page 1SNK160S01 ZK2.5-SP-P PI-Spring Terminal Blocks Disconnect with plug - with test socket The flexible solution for fitting the component of your choice in

More information

ZS6-4S Screw Clamp Terminal Blocks Feed-through with 4 connections

ZS6-4S Screw Clamp Terminal Blocks Feed-through with 4 connections Technical Datasheet 1SNK166D01 Catalogue Page 1SNK166S01 ZS6-4S Screw Clamp Terminal Blocks Feed-through with 4 connections - High density wiring (one potential distribution on 4 independent screw clamps)

More information

ZS10 Screw Clamp Terminal Blocks Feed-through

ZS10 Screw Clamp Terminal Blocks Feed-through Technical Datasheet SNK6004D00 Catalogue Page SNK6004S00 ZS0 Screw Clamp Terminal Blocks Feed-through Save space by connecting conductors up to 0 mm² (CB certified) 6 AWG in just 8 mm 0. in spacing. SNK6008F004

More information

ZP2.5-PE Spring Terminal Block Ground

ZP2.5-PE Spring Terminal Block Ground Technical Datasheet 1SNK162002D0201.indd 08/06/11 ZP2.5-PE Spring Terminal Block Ground Catalogue Page Improve the safety of your installation in the event of a short-circuit thanks to our screwless rail

More information

ZS35-PEN Screw Clamp Terminal Blocks Ground + Neutral

ZS35-PEN Screw Clamp Terminal Blocks Ground + Neutral Technical Datasheet SNK6047D00 Catalogue Page ZS35-PEN Screw Clamp Terminal Blocks Ground + Neutral Simplify your PE.N connection with ZS35-PE block connected to ZS35-BL through a premounted jumper. SNK6063F004

More information

ZS4 Screw Clamp Terminal Blocks Feed-through

ZS4 Screw Clamp Terminal Blocks Feed-through Technical Datasheet SNK60D0 Catalogue Page SNK60S0 ZS4 Screw Clamp Terminal Blocks Feed-through Save space by connecting conductors up to 4 mm² (CB certified) AWG in just. mm 0. in spacing. SNK60F00 SNK0000F0000

More information

DBL distribution blocks 3x1 pole

DBL distribution blocks 3x1 pole TECHNICAL DATASHEET 1SNC166019D0201 - CATALOGUE PAGE 1SNC166020S0201 DBL distribution blocks 3x1 pole 84.6 3.33" 25 0.98" 32.5 1.28" 28.2 1.11" 23.5 0.93" 14.7 0.58" 36.3 1.43" 75 2.95" 62 2.44" 50.7 2"

More information

ZS6 Screw Clamp Terminal Blocks Feed-through

ZS6 Screw Clamp Terminal Blocks Feed-through Technical Datasheet SNK608D0 Catalogue Page SNK608S0 ZS6 Screw Clamp Terminal Blocks Feed-through Save space by connecting conductors up to 6 mm² (CB certified) AWG in just 6 mm 0.6 in spacing. SNK6F004

More information

ZP2.5-4P Spring Terminal Block Feed-through

ZP2.5-4P Spring Terminal Block Feed-through Technical Datasheet 1SNK162005D0201.indd 08/06/11 ZP2.5-4P Spring Terminal Block Feed-through Catalogue Page Thanks to the ZP2.5-4P, PI-Spring terminal block: Save time and connect directly rigid and flexible

More information

System pro M compact Miniature Circuit Breaker SU200M for branch circuit protection acc. to UL 489

System pro M compact Miniature Circuit Breaker SU200M for branch circuit protection acc. to UL 489 System pro M compact Miniature Circuit Breaker SU200M for branch circuit protection acc. to UL 489 2CDC021004S0014 2CDC021046S0014 The miniature circuit breaker SU 200 M is ABB s solution for UL 489 branch

More information

ZS10-ST Screw Clamp Terminal Blocks Test disconnect with sliding link

ZS10-ST Screw Clamp Terminal Blocks Test disconnect with sliding link Technical Datasheet SNK656D0 Catalogue Page ZS-ST Screw Clamp Terminal Blocks Test disconnect with sliding link - Secure your disconnect operations in control circuits with the robust sliding link operated

More information

ZK2.5-PE-4P PI-Spring Terminal Blocks Ground with 4 connections

ZK2.5-PE-4P PI-Spring Terminal Blocks Ground with 4 connections Technical Datasheet 1SNK16D01 Catalogue Page 1SNK1641S01 ZK.5-PE-4P PI-Spring Terminal Blocks Ground with 4 connections Improve the safety of your installation in the event of a short-circuit thanks to

More information

ZS50-PE Screw Clamp Terminal Blocks Ground

ZS50-PE Screw Clamp Terminal Blocks Ground Technical Datasheet SNK607D00 Catalogue Page ZS0-PE Screw Clamp Terminal Blocks Ground - Reliable electrical and mechanical contact with the rail that exceeds the requirements of the IEC 60947-7- terminal

More information

Accessories for Contactors and Contactor Relays

Accessories for Contactors and Contactor Relays 4/0 Accessories for Contactors and Contactor Relays Contents Accessories for A... Series and BC... Series Contactors and for Contactor Relays Auxiliary Contact Blocks - Front Mounting... 4/2 Auxiliary

More information

ZK4-4P PI-Spring Terminal Blocks Feed-through with 4 connections

ZK4-4P PI-Spring Terminal Blocks Feed-through with 4 connections Technical Datasheet 1SNK167D01 Catalogue Page 1SNK16S01 ZK4-4P PI-Spring Terminal Blocks Feed-through with 4 connections Find all the features of the ZK4 terminal block with the added option of distributing

More information

ZDP Pluggable Terminal Blocks Feed-through

ZDP Pluggable Terminal Blocks Feed-through Technical Datasheet 1SNK161D01 Catalogue Page 1SNK161S01 ZDP.- Pluggable Terminal Blocks Feed-through - Save in flexibility, reliability and simplicity thanks to the pluggable terminal blocks ZDP, - They

More information

ZK2.5-4P PI-Spring Terminal Blocks Feed-through with 4 connections

ZK2.5-4P PI-Spring Terminal Blocks Feed-through with 4 connections Technical Datasheet 1SNK161D01 Catalogue Page 1SNK165S01 ZK.5-4P PI-Spring Terminal Blocks Feed-through with 4 connections Find all the features of the ZK.5 terminal block with the added option of distributing

More information

ZS4-D-CH Screw Clamp Terminal Blocks Component holder

ZS4-D-CH Screw Clamp Terminal Blocks Component holder Technical Datasheet SNK6090D00 Catalogue Page ZS4-D-CH Screw Clamp Terminal Blocks Component holder Protect your circuit with one N4007 diode. SNK64V004 SNK008F0000 3D CAD outline drawings available on

More information

System pro M compact Miniature Circuit Breaker S 200 M UC for DC and AC applications

System pro M compact Miniature Circuit Breaker S 200 M UC for DC and AC applications System pro M compact Miniature Circuit Breaker S 200 M UC for DC and AC applications 2CDC021031S0011 2CDC021033S0011 The miniature circuit breaker S 200 M UC extends the established ABB System pro M compact

More information

ZS4-D2-S-T Screw Clamp Terminal Blocks Double deck with 1 disconnect circuit with test socket screws and 1 feed-through circuit

ZS4-D2-S-T Screw Clamp Terminal Blocks Double deck with 1 disconnect circuit with test socket screws and 1 feed-through circuit Technical Datasheet SNK607D00 Catalogue Page SNK607S00 ZS4-D-S-T Screw Clamp Terminal Blocks Double deck with disconnect circuit with test socket screws and feed-through circuit Find the same functionalities

More information

ZS6-S Screw Clamp Terminal Blocks Disconnect with blade

ZS6-S Screw Clamp Terminal Blocks Disconnect with blade Technical Datasheet SNK646D00 Catalogue Page ZS6-S Screw Clamp Terminal Blocks Disconnect with blade - Ease your disconnect operations with the disconnect blade operated by hand or with a screwdriver,

More information

ZS6-D1-PE Screw Clamp Terminal Blocks Double deck with 1 ground circuit

ZS6-D1-PE Screw Clamp Terminal Blocks Double deck with 1 ground circuit Technical Datasheet SNK649D00 Catalogue Page ZS6-D-PE Screw Clamp Terminal Blocks Double deck with ground circuit - Save space with double deck ground terminal blocks aligned with ZS6-D double deck terminal

More information

Redundancy unit CP-C.1-A-RU Accessory for CP-C.1 range power supplies

Redundancy unit CP-C.1-A-RU Accessory for CP-C.1 range power supplies Data sheet Redundancy unit -A-RU Accessory for range power supplies ABB s redundancy units are used to establish true redundancy which increases the availability of electrical systems significantly. 2CDC

More information

ZS10-S-R2 Screw Clamp Terminal Blocks Disconnect with lever

ZS10-S-R2 Screw Clamp Terminal Blocks Disconnect with lever Technical Datasheet SNK6D0 Catalogue Page ZS-S-R2 Screw Clamp Terminal Blocks Disconnect with lever Simplify the disconnect operations for the disconnect terminal blocks installed next to fuse terminal

More information

ZS4-SF1 Screw Clamp Terminal Blocks For 5 x 20 and 5 x 25 fuses

ZS4-SF1 Screw Clamp Terminal Blocks For 5 x 20 and 5 x 25 fuses Technical Datasheet SNK6D00 Catalogue Page ZS-SF Screw Clamp Terminal Blocks For 5 x 0 and 5 x 5 fuses Protect your circuit with 5x5 and 5x0 fuse terminal blocks, compliant with IEC 607-7-3 standard (fuse

More information

ZK2.5-D-CH PI-Spring Terminal Blocks Component holder

ZK2.5-D-CH PI-Spring Terminal Blocks Component holder Technical Datasheet SNK6066D00 Catalogue Page ZK.-D-CH PI-Spring Terminal Blocks Component holder Protect your circuit with one N4007 diode. SNK60V004 SNK009F0000 3D CAD outline drawings available on "Control

More information

ZS4-SF Screw Clamp Terminal Blocks For 5 x 20 fuses

ZS4-SF Screw Clamp Terminal Blocks For 5 x 20 fuses Technical Datasheet SNK60D00 Catalogue Page ZS-SF Screw Clamp Terminal Blocks For x 0 fuses - Protect your circuits with x0 fuse terminal blocks compliant with IEC 607-7-3 standard (fuse not supplied with

More information

ZS4-SF1-T Screw Clamp Terminal Blocks For 5 x 20 and 5 x 25 fuses - with test socket

ZS4-SF1-T Screw Clamp Terminal Blocks For 5 x 20 and 5 x 25 fuses - with test socket Technical Datasheet 1SNK166D001 Catalogue Page ZS-SF1-T Screw Clamp Terminal Blocks For x 0 and x fuses - with test socket - Protect your circuit with x and x0 fuse terminal blocks (fuse not supplied with

More information

ZS35 Screw Clamp Terminal Blocks Feed-through

ZS35 Screw Clamp Terminal Blocks Feed-through Technical Datasheet SNK609D00 Catalogue Page ZS3 Screw Clamp Terminal Blocks Feed-through Closed terminal block: - No end section needed, - Optimized rigidity, - Perfectly adapted to solar applications:

More information

ZK2.5-SF-R PI-Spring Terminal Blocks For 5x20 fuses - with blown fuse indicator

ZK2.5-SF-R PI-Spring Terminal Blocks For 5x20 fuses - with blown fuse indicator Technical Datasheet SNK605D00 Catalogue Page SNK60S00 ZK.5-SF-R PI-Spring Terminal Blocks For 5x0 fuses - with blown fuse indicator - Protect your circuits with 5x0 fuse terminal blocks compliant with

More information

ZS10-PE Screw Clamp Terminal Blocks Ground

ZS10-PE Screw Clamp Terminal Blocks Ground Technical Datasheet SNK606D00 Catalogue Page ZS0-PE Screw Clamp Terminal Blocks Ground Improve the safety of your installation in the event of a short-circuit thanks to our screwless rail contact: - Rail

More information

ZK2.5-SP PI-Spring Terminal Blocks Disconnect with plug - with test sockets

ZK2.5-SP PI-Spring Terminal Blocks Disconnect with plug - with test sockets Technical Datasheet SNK603D00 Catalogue Page SNK6038S00 ZK.5-SP PI-Spring Terminal Blocks Disconnect with plug - with test sockets The flexible solution for fitting the component of your choice in series

More information

ZS6-3S Screw Clamp Terminal Blocks Feed-through with 3 connections

ZS6-3S Screw Clamp Terminal Blocks Feed-through with 3 connections Technical Datasheet SNK663D00 Catalogue Page SNK667S00 ZS6-3S Screw Clamp Terminal Blocks Feed-through with 3 connections - Recommended for energy markets and highly demanding applications requiring that

More information

ABB s new control and protection devices

ABB s new control and protection devices ABB s new control and protection devices One product family ABB presents a new generation of first-class specialized components: manual motor starters, contactors, overload relays and softstarters for

More information

ZS4-PE Screw Clamp Terminal Blocks Ground

ZS4-PE Screw Clamp Terminal Blocks Ground Technical Datasheet SNK600D00 Catalogue Page ZS4-PE Screw Clamp Terminal Blocks Ground Improve the safety of your installation in the event of a short-circuit thanks to our screwless rail contact: - Rail

More information

ZK2.5-D1-PE PI-Spring Terminal Blocks Double deck with 1 ground circuit

ZK2.5-D1-PE PI-Spring Terminal Blocks Double deck with 1 ground circuit Technical Datasheet SNK6040D00 Catalogue Page SNK604S00 ZK.-D-PE PI-Spring Terminal Blocks Double deck with ground circuit Improve the safety of your installation in the event of a short-circuit thanks

More information

ZK6 PI-Spring Terminal Blocks Feed-through

ZK6 PI-Spring Terminal Blocks Feed-through Technical Datasheet SNK69D0 Catalogue Page SNK69S0 ZK6 PI-Spring Terminal Blocks Feed-through Combine high performance with compact dimensions: - 000 V AC / DC IEC 600 V UL, - Opt for the best marking

More information

Contactors : Wide band AC / DC operated

Contactors : Wide band AC / DC operated Contactors : Wide band AC / DC operated NF / s Wide band AC / DC Operated - with Screw Terminals Description NF / include an electronic coil interface accepting a wide control voltage Uc min.... Uc max.

More information

ZK4-PE PI-Spring Terminal Blocks Ground

ZK4-PE PI-Spring Terminal Blocks Ground Technical Datasheet SNK60D00 Catalogue Page SNK60S00 ZK-PE PI-Spring Terminal Blocks Ground Improve the safety of your installation in the event of a short-circuit thanks to our screwless rail contact:

More information

ZS6 Screw Clamp Terminal Blocks Feed-through

ZS6 Screw Clamp Terminal Blocks Feed-through Technical Datasheet SNK6008D00 Catalogue Page ZS6 Screw Clamp Terminal Blocks Feed-through Save space by connecting conductors up to 6 mm² (without insulated ferrule, CB certified) 0 AWG in just 6 mm 0.36

More information

ZK2.5-4P PI-Spring Terminal Blocks Feed-through with 4 connections

ZK2.5-4P PI-Spring Terminal Blocks Feed-through with 4 connections Technical Datasheet SNK60D00 Catalogue Page SNK605S00 ZK.5-P PI-Spring Terminal Blocks Feed-through with connections Find all the features of the ZK.5 terminal block with the added option of distributing

More information

US Catalog. Motor protection and control AF Range contactors & overload relays

US Catalog. Motor protection and control AF Range contactors & overload relays US Catalog Motor protection and control AF Range contactors & overload relays Motor rated operational powers and currents The currents given below concern standard three-phase four-pole cage motors (500

More information

Mini Contactors Applications and Segments

Mini Contactors Applications and Segments Mini Contactors and Segments Overview and Mini Contactors ABB Mini Contactors Success story Energy for motors, machines or other electrical components has to be reliably turned on and off often by remote

More information

AF09... AF96 3-pole contactors Accessory fitting details

AF09... AF96 3-pole contactors Accessory fitting details AF9... AF96 3-pole contactors Accessory fitting details Contactor and main accessories (other accessories available) AF9... AF65 AF contactor (without top mounted coil terminal block) VEM4 mechanical and

More information

System pro M compact Miniature Circuit Breaker S 200 M UC for DC and AC applications

System pro M compact Miniature Circuit Breaker S 200 M UC for DC and AC applications Data Sheet System pro M compact Miniature Circuit Breaker S 200 M UC for DC and AC applications 2CDC021031S0011 2CDC021033S0011 The miniature circuit breaker S 200 M UC extends the established ABB System

More information

Protection and Connection Motorized and automatic transfer switches IEC Technical guide

Protection and Connection Motorized and automatic transfer switches IEC Technical guide Protection and Connection Motorized and automatic transfer switches IEC 61439 Technical guide Motorized change-over switches Uninterrupted power supply with motorized functionality ABB offers a wide variety

More information

Selective main circuit breakers S 750 series Technical Data

Selective main circuit breakers S 750 series Technical Data Selective main circuit breakers S 750 series Technical Data When connecting aluminium conductors ( 4 mm 2 ) ensure that the contact surfaces of the conductors are cleaned, brushed and treated with grease.

More information

MS General Information Extended Product Type: MS

MS General Information Extended Product Type: MS MS132-1.6 General Information Extended Product Type: MS132-1.6 Product ID: 1SAM350000R1006 EAN: 4013614400063 Catalog Description: MS132-1.6 Manual Motor Starter Long Description: The MS132-1.6 manual

More information

AF09... AF38 3-pole contactors 4 to 18.5 kw, AC / DC operated

AF09... AF38 3-pole contactors 4 to 18.5 kw, AC / DC operated AF09... AF3 3-pole contactors 4 to 1.5 kw, AC / DC operated AF09-30-10 AF09... AF3 contactors are mainly used for controlling 3-phase motors and power circuits up to 690 V AC and 220 V DC. These contactors

More information

TeSys contactors. Use in category DC-1 (resistive loads; time constant L/R y 1 ms) Rated operational current Ie. to be wired in series

TeSys contactors. Use in category DC-1 (resistive loads; time constant L/R y 1 ms) Rated operational current Ie. to be wired in series Selection 3-pole shockproof contactors FG d.c. supply Selection guide for utilisation categories DC-1 to DC-5 Use in category DC-1 (resistive loads; time constant L/R y 1 ms) Rated operational current

More information

Manual motor starters Overview and benefits

Manual motor starters Overview and benefits Manual motor starters Overview and benefits ABB offers a complete standard motor-protection concept for the world market IEC motor branch protection UL type E/F Motor applications with fuseless protection

More information

SU200M Datasheet. Branch protection acc. to CSA C22.2 No.5 / UL 489

SU200M Datasheet. Branch protection acc. to CSA C22.2 No.5 / UL 489 MINIATURE CIRCUIT BREAKERS SU200M Datasheet Branch protection acc. to CSA C22.2 No.5 / UL 489 The miniature circuit breaker SU200 M is ABB s solution for UL 489 branch circuit protection up to 480 Y/277

More information

B Mini Contactor V Hz

B Mini Contactor V Hz ABB B7-30-10-80 Mini Contactor 220-240V 40-450Hz General Information Extended Product Type Product ID B7-30-10-80 GJL1311001R8100 EAN 4013614150197 Catalog Description Long Description B7-30-10-80 Mini

More information

SIRIUS 3RU2 Thermal Overload Relays

SIRIUS 3RU2 Thermal Overload Relays Overview 1 2 3 4 6 1 2 NSB0_0207a Connection for mounting onto contactors: Optimally adapted in electrical, mechanical and design terms to the contactors. The overload relay can be connected directly to

More information

B115...B180 RF200 RFN200 B250...B400 RF400 RFN400

B115...B180 RF200 RFN200 B250...B400 RF400 RFN400 Page -2 Page -4 Page -6 FOR BG SERIES MINI-CONTACTORS Type RF9, phase failure sensitive, manual resetting Type RFA9, phase failure sensitive, automatic resetting Type RFN9, non-phase failure sensitive,

More information