ACCELERATE YOUR PRODUCTIVITY. Lightweight Tooling Catalog. destaco.com. STAY Informed STAY Connected STAY Productive
|
|
|
- Amanda Douglas
- 5 years ago
- Views:
Transcription
1 ACCELERATE YOUR PRODUCTIVITY Lightweight Tooling Catalog STAY Informed STAY Connected STAY Productive
![2 Lightweight Tooling Components Crossbar Tool Example Crossbar Saddle (Idle) Large Tube T-Clamp M8 Fasteners Torque to 38Nm [28 ft-lbs] Single End Extension with 32mm Ball Mount Crossbar Saddle](/docs-images/80/82415153/images/2-2.jpg "w/air (Right Hand Shown) Tri-Axis Tool Example T-Clamp with Swivel Ball Mount Port Only Adaptor GT-MC-A2-EL Vacuum Cups Tri-Axis Adaptor Mount M8 Fasteners Torque to 38Nm [28 ft-lbs] Cam Action")
2 2 Lightweight Tooling Components Crossbar Tool Example Crossbar Saddle (Idle) Large Tube T-Clamp M8 Fasteners Torque to 38Nm [28 ft-lbs] Single End Extension with 32mm Ball Mount Crossbar Saddle w/air (Right Hand Shown) Tri-Axis Tool Example T-Clamp with Swivel Ball Mount Port Only Adaptor GT-MC-A2-EL Vacuum Cups Tri-Axis Adaptor Mount M8 Fasteners Torque to 38Nm [28 ft-lbs] Cam Action Grippers Single End Extension Small Tubing Cross Clamp Gripper Mount Shovel with 32mm Ball Single End Extension with 32mm Ball Mount Dimensions and technical information are subject to change without notice PRODUCT INNOVATION
3 Lightweight Tooling Components 3 Interpress Crossbar Tooling Example M8 Fasteners Single End Extension T-Clamp with Swivel Ball Mount Vacuum Cups Ø30mm Guide Mount ARV Auto Release Venturi Lower Nest Tooling Example Nest Guide Centering Pin LWT Tube Lower Nest Mount Adaptor Flange Mount Lower Nest Mount Receiver PRODUCT INNOVATION Dimensions and technical information are subject to change without notice
![06 lb] 25 276 72 GRS-SD-40 Crossbar Saddle w/air (Right Hand) 72 Load:](/docs-images/80/82415153/images/4-1.jpg "400Nm 276 GRS-SD-40-RHS-A 938g [2.")
![06 lb] GRS-SD-40 Crossbar Saddle (Idle) 230 110.1 105.](/docs-images/80/82415153/images/4-2.jpg "5 Ø40 Load: 400Nm GRS-SD-40-NA-A 535g [1.")
4 4 Lightweight Tooling Components GRS-SD-40 Crossbar Saddle w/air (Left Hand) Ø40 Load: 400Nm GRS-SD-40-LHS-A 938g [2.06 lb] GRS-SD-40 Crossbar Saddle w/air (Right Hand) 72 Load: 400Nm 276 GRS-SD-40-RHS-A 938g [2.06 lb] GRS-SD-40 Crossbar Saddle (Idle) Ø40 Load: 400Nm GRS-SD-40-NA-A 535g [1.18 lb] Dimensions and technical information are subject to change without notice PRODUCT INNOVATION
![Lightweight Tooling Components 5 LWT Boom/Tube (3mm Wall) Material: Aluminum (Ø) Tolerance LWT-40-1000 40 ±0.14 987g/m [0.66 lb/ft] LWT-30-1000 30 +0.08/-0.14 715g/m [0.](/docs-images/80/82415153/images/5-0.jpg "48 lb/ft] LWT-25-1000 25 +0.08/-0.14 581g/m [0.39 lb/ft] LWT-20-1000 20 ±0.08 450g/m [0.")
5 Lightweight Tooling Components 5 LWT Boom/Tube (3mm Wall) Material: Aluminum (Ø) Tolerance LWT ± g/m [0.66 lb/ft] LWT / g/m [0.48 lb/ft] LWT / g/m [0.39 lb/ft] LWT ± g/m [0.30 lb/ft] LWT Deflection Charts PRODUCT INNOVATION Dimensions and technical information are subject to change without notice
![5 Angled T-Clamp A TCL-40M-25M-30-L 30 158g [0.35 lb] TCL-40M-25M-30-R 30 158g [0.](/docs-images/80/82415153/images/6-1.jpg "35 lb] TCL-40M-25M-45-L 45 158g [0.35 lb] TCL-40M-25M-45-R 45 158g [0.")
![35 lb] TCL-40M-20M-30-L 30 145g [0.32 lb] TCL-40M-20M-30-R 30 145g [0.](/docs-images/80/82415153/images/6-2.jpg "32 lb] TCL-40M-20M-45-L 45 145g [0.32 lb] TCL-40M-20M-45-R 45 145g [0.")
![32 lb] A 131 72 TCL Ø30 to T-Clamp 105 43.5 48 TCL-30M-25M-A 270g [0.](/docs-images/80/82415153/images/6-3.jpg "59 lb] 49 74 Ø30 TCL Ø40 to Ø32 Ball Clamp 99 Patent Pending TCL-40M-32B-A 149g [0.")
6 6 Lightweight Tooling Components TCL Ø40 T-Clamps Load: 260Nm Standard T-Clamp ØD TCL-40M-25M-A 158g [0.35 lb] TCL-40M-20M-A Ø20 145g [0.32 lb] Ø40 ØD 77.5 Angled T-Clamp A TCL-40M-25M-30-L g [0.35 lb] TCL-40M-25M-30-R g [0.35 lb] TCL-40M-25M-45-L g [0.35 lb] TCL-40M-25M-45-R g [0.35 lb] TCL-40M-20M-30-L g [0.32 lb] TCL-40M-20M-30-R g [0.32 lb] TCL-40M-20M-45-L g [0.32 lb] TCL-40M-20M-45-R g [0.32 lb] A TCL Ø30 to T-Clamp TCL-30M-25M-A 270g [0.59 lb] Ø30 TCL Ø40 to Ø32 Ball Clamp 99 Patent Pending TCL-40M-32B-A 149g [0.33 lb] Dimensions and technical information are subject to change without notice PRODUCT INNOVATION
![32 lb] TCL-20M-32B-A Ø20 128g [0.](/docs-images/80/82415153/images/7-1.jpg "28 lb] L SØ32 (SWIVEL BALL END) 70 TCL Ø32 Ball to Ball Clamp")
7 Lightweight Tooling Components 7 TCL to Ø32 Ball Clamp ØD ` ØD TCL-25M-32B-A 147g [0.32 lb] TCL-20M-32B-A Ø20 128g [0.28 lb] L SØ32 (SWIVEL BALL END) 70 TCL Ø32 Ball to Ball Clamp TCL-32B-25M-90-A 145g [0.32 lb] SØ32 (SWIVEL BALL END) (ROD INSERT) TCF Flange Mount Ø TCF-25M-A 98g [0.22 lb] RJM Flange Mount RJM-STS g [0.37 lb] Ø PRODUCT INNOVATION Dimensions and technical information are subject to change without notice
![91 lb] f7 39 Ø30 119 150 TCL Ø30 to Single End Extension L1 L3 31](/docs-images/80/82415153/images/8-1.jpg "L1 L2 L3 TCL-30M-25M-300-A 300 320 352 281g [0.")
![62 lb] TCL-30M-25M-600-A 600 620 652 456g [1.](/docs-images/80/82415153/images/8-2.jpg "01 lb] L2 Ø30 48 ES to Ø20 Apple Core Mount ØD ES-20M-25M-300-A 20")
8 8 Lightweight Tooling Components GTA Tri-Axis Adaptor Mount 49 f7 240 Load: 400Nm GTA g [0.91 lb] f7 39 Ø TCL Ø30 to Single End Extension L1 L3 31 L1 L2 L3 TCL-30M-25M-300-A g [0.62 lb] TCL-30M-25M-600-A g [1.01 lb] L2 Ø30 48 ES to Ø20 Apple Core Mount ØD ES-20M-25M-300-A g [0.55 lb] ES-19M-25M-300-A 19 ES Ø20 to Ø20 Apple Core Mount Ø20 33 Ø ES-20M-20M-A 100g [0.22 lb] Dimensions and technical information are subject to change without notice PRODUCT INNOVATION
9 Lightweight Tooling Components 9 SGM Interpress Crossbar Tooling CPI-SGM-ASSY-FLC CPI-SGM-ASSY-FRC CPI-SGM-ASSY-RLC CPI-SGM-ASSY-RRC CPI-SGM-ASSY-FLC-EL CPI-SGM-ASSY-FRC-EL CPI-SGM-ASSY-RLC-EL CPI-SGM-ASSY-RRC-EL Description Interpress Tool, Front Left Side, No Electric Interpress Tool, Front Right Side, No Electric Interpress Tool, Rear Left Side, No Electric Interpress Tool, Rear Right Side, No Electric Interpress Tool, Front Left Side, w/electric Connector Installed Interpress Tool, Front Right Side, w/electric Connector Installed Interpress Tool, Rear Left Side, w/electric Connector Installed Interpress Tool, Rear Right Side, w/electric Connector Installed SGM Interpress Crossbar Tooling CPI-SGM-ASSY-BT-FL CPI-SGM-ASSY-BT-FR CPI-SGM-ASSY-BT-RL CPI-SGM-ASSY-BT-RR CPI-SGM-ASSY-BT-FL-EL CPI-SGM-ASSY-BT-FR-EL CPI-SGM-ASSY-BT-RL-EL CPI-SGM-ASSY-BT-RR-EL PRODUCT INNOVATION Description Blankload Tool, Front Left Side, No Electric Blankload Tool, Front Right Side, No Electric Blankload Tool, Rear Left Side, No Electric Blankload Tool, Rear Right Side, No Electric Blankload Tool, Front Left Side, w/electric Connector Installed Blankload Tool, Front Right Side, w/electric Connector Installed Blankload Tool, Rear Left Side, w/electric Connector Installed Blankload Tool, Rear Right Side, w/electric Connector Installed Dimensions and technical information are subject to change without notice
![nut and plug Material: Aluminum G 3/8 41 57 ØD PA-20M 20 114g [0.25 lb] PA-19M-EU 19 PA-32M-B 96g [0.](/docs-images/80/82415153/images/10-1.jpg "21 lb] PA 28mm Ball for C-Mount Material: Aluminum CPI-PA-B112-CM 106g [0.")
![23 lb] ARV Auto Release Venturi Material: Aluminum CPI-VSA-ARVL-750-G38-VS CPI-VSA-ARVR-750-G38-VS](/docs-images/80/82415153/images/10-2.jpg "CPI-VSA-ARVL-B112-G38-VS CPI-VSA-ARVR-B112-G38-VS CPI-VSA-ARVL-B32-G38-VS CPI-VSA-ARVR-B32-G38-VS 104g [0.")
![23 lb] 122g [0.27 lb] 220g [0.49 lb] Specifications@ 4 bar [60psi]: VSA-ARV Speed to Vacuum 0.2-0.](/docs-images/80/82415153/images/10-3.jpg "3 seconds Speed to Release 0.")
10 10 Lightweight Tooling Components PA Port Only Adaptors Apple Core Mount 56 32mm Ball Mount G 1/8 28 G 1/8 33 G 1/8 (PA-20M ONLY) G 1/4 (PA-19M-EU ONLY) G 1/4 SØ Material: Aluminum G 3/8 ØD includes locking nut and plug Material: Aluminum G 3/ ØD PA-20M g [0.25 lb] PA-19M-EU 19 PA-32M-B 96g [0.21 lb] PA 28mm Ball for C-Mount Material: Aluminum CPI-PA-B112-CM 106g [0.23 lb] ARV Auto Release Venturi Material: Aluminum CPI-VSA-ARVL-750-G38-VS CPI-VSA-ARVR-750-G38-VS CPI-VSA-ARVL-B112-G38-VS CPI-VSA-ARVR-B112-G38-VS CPI-VSA-ARVL-B32-G38-VS CPI-VSA-ARVR-B32-G38-VS 104g [0.23 lb] 122g [0.27 lb] 220g [0.49 lb] Specifications@ 4 bar [60psi]: VSA-ARV Speed to Vacuum seconds Speed to Release 0.02 seconds Air Consumption Vacuum 40 l/m Blow-off 0 Noise 1 Meter 68dBA Dimensions and technical information are subject to change without notice PRODUCT INNOVATION
![300 320 345 262g [0.56 lb] ES-32B-25M-600-A 600 620 645 437g [0.](/docs-images/80/82415153/images/11-1.jpg "96 lb] L1 L2 24 66 PRODUCT INNOVATION Dimensions and technical information are")
11 Lightweight Tooling Components 11 GT-BGA 32mm Ball Gripper Mount GT-BGA-A 174g [0.38 lb] ES 32mm Ball Extension L3 SØ32 (SWIVEL BALL END) L1 L2 L3 ES-32B-25M-300-A g [0.56 lb] ES-32B-25M-600-A g [0.96 lb] L1 L PRODUCT INNOVATION Dimensions and technical information are subject to change without notice
![45 lb] GTS-100 32mm Ball 100mm Shovel (Right Hand) (Left Hand) Material: Steel](/docs-images/80/82415153/images/12-1.jpg "GTS-100-85-100LH-A GTS-100-85-100RH-A 730g [1.")
12 12 Lightweight Tooling Components GTS mm Ball 80mm Shovel (Right Hand) (Left Hand) Material: Steel GTS LH-A GTS RH-A 656g [1.45 lb] GTS mm Ball 100mm Shovel (Right Hand) (Left Hand) Material: Steel GTS LH-A GTS RH-A 730g [1.61 lb] Dimensions and technical information are subject to change without notice PRODUCT INNOVATION
![47 lb] 48 31 Ø20 34 103 28 78 Ø40 Material: High Strength Aluminum 40 Ø40 to Ø20 Cross Clamp CL-40M-20M-A 202g [0.](/docs-images/80/82415153/images/13-1.jpg "45 lb] Material: High Strength Aluminum 31 to Cross Clamp CL-25M-25M-A 102g [0.22 lb] 31 26 Ø20 Ø20 26.")
13 Lightweight Tooling Components 13 CL Cross Clamp Ø Ø40 Ø40 Material: High Strength Aluminum Load: 300Nm 48 Ø40 to Ø40 Cross Clamp CL-40M-40M-A 233g [0.51 lb] Material: High Strength Aluminum Load: 300Nm 40 Ø40 to Cross Clamp CL-40M-25M-A 214g [0.47 lb] Ø Ø40 Material: High Strength Aluminum 40 Ø40 to Ø20 Cross Clamp CL-40M-20M-A 202g [0.45 lb] Material: High Strength Aluminum 31 to Cross Clamp CL-25M-25M-A 102g [0.22 lb] Ø20 Ø Ø20 Material: High Strength Aluminum 30 to Ø20 Cross Clamp CL-25M-20M-A 98g [0.22 lb] Material: High Strength Aluminum 26 Ø20 to Ø20 Cross Clamp CL-20M-20M-A 52g [0.11 lb] PRODUCT INNOVATION Dimensions and technical information are subject to change without notice
![21 lb] CP Centering Pin 30 78 60 200 Material: High Strength Aluminum to Parallel Clamp PC-25M-25M-A 93g [0.](/docs-images/80/82415153/images/14-1.jpg "21 lb] Material: Steel, 200mm Length CP-25-200 640g [1.41 lb] NPG Nest Guide 46 26 267 Material: Steel, 200mm Length NPG-25-200 432g [0.")
14 14 Lightweight Tooling Components CL Cross Clamp 31 ØD PC Parallel Clamp Ø30 to Cross Clamp CL-30M-25M-A 148g [0.33 lb] 31 to Apple Core Cross Clamp ØD CL-25M-19M-PA-A 19 95g [0.21 lb] CL-25M-20M-PA-A 20 94g [0.21 lb] CP Centering Pin Material: High Strength Aluminum to Parallel Clamp PC-25M-25M-A 93g [0.21 lb] Material: Steel, 200mm Length CP g [1.41 lb] NPG Nest Guide Material: Steel, 200mm Length NPG g [0.95 lb] Dimensions and technical information are subject to change without notice PRODUCT INNOVATION
![55 lb] TPA-25-65-LWT-A 63 88 327g [0.](/docs-images/80/82415153/images/15-2.jpg "72 lb] TPA Double Transfer Press Adaptor 45 45")
![10 lb] TPA-25-25-65-LWT-A 63 88 647g [1.](/docs-images/80/82415153/images/15-4.jpg "43 lb] PRODUCT INNOVATION Dimensions and")
15 Lightweight Tooling Components TPA Single Transfer Press Adaptors 9 43 TPA TPA L1 L2 Configured 90 L1 L2 TPA LWT-A g [0.55 lb] TPA LWT-A g [0.72 lb] TPA Double Transfer Press Adaptor L2 L1 260 Configured 90 L1 L2 TPA LWT-A g [1.10 lb] TPA LWT-A g [1.43 lb] PRODUCT INNOVATION Dimensions and technical information are subject to change without notice
![28 lb] SGM Lower Nest Mount Adaptor 4X M6 4X M8 2X M10 34.9 45 79.](/docs-images/80/82415153/images/16-1.jpg "7 Material: Aluminum CPI-SGM-TH-USA 287g [0.63 lb] 45.0 57.2 70.0 149.7 9.")
16 16 Lightweight Tooling Components SGM Lower Nest Mount Receiver 35 FOR M8 (4X) Material: Aluminum CPI-SGM-TH-USR-AL 581g [1.28 lb] SGM Lower Nest Mount Adaptor 4X M6 4X M8 2X M Material: Aluminum CPI-SGM-TH-USA 287g [0.63 lb] Dimensions and technical information are subject to change without notice PRODUCT INNOVATION
17 Lightweight Tooling Components 17 84A Series Cam Action Grippers DE-STA-CO Products used with Lightweight Tooling This soft durometer is useful for dryer, contoured panels. However, this durometer has less life. B This medium hard durometer will seal and adapt to contours well and is good for all around usage. This durometer has a longer life than the 30 durometer. This hard durometer is helpful for extremely oily panels and flat surfaces such as a destacker operation. Vacuum cups of this durometer will have the longest life span. 84A2 and 84A3 dimensions can be found in the Clamping Technology Catalog 3/8 G Mount Vacuum cups dimensions can be found in the Vacuum Products Catalog Standard Vacuum Cups (DR) = Durometer (DR) = Durometer (DR) = Durometer Round Traction Vacuum Cups Metric Ø50mm CPI-50HT-B-(DR) Ø90mm CPI-90HT-B-(DR) Ø115mm CPI-115HT-B-(DR) Ø140mm CPI-140HT-B-(DR) Round Belcup Vacuum Cups Metric Ø40mm CPI-40BT-B-(DR) Ø50mm CPI-50BT-B-(DR) Ø75mm CPI-75BT-B-(DR) Ø100mm CPI-100BT-B-(DR) Ø125mm CPI-125BT-B-(DR) Round Flatfoot Vacuum Cups Metric Ø50mm CPI-50PF-B-(DR) Ø75mm CPI-75PF-B-(DR) Ø100mm CPI-100PF-B-(DR) Ø125mm CPI-125PF-B-(DR) Round Deepdish Vacuum Cups (DR) = Durometer Metric Ø50mm CPI-50DM-B-(DR) Ø75mm CPI-75DM-B-(DR) Ø100mm CPI-100DM-B-(DR) Oval Flatfoot Vacuum Cups (DR) = Durometer Metric 40 x 75mm CPI-40-75PF-(M)-(DR) 50 x 100mm CPI PF-(M)-(DR) 63 x 125mm CPI PF-(M)-(DR) 75 x 150mm CPI PF-(M)-(DR) PRODUCT INNOVATION Dimensions and technical information are subject to change without notice
18 18 Lightweight Tooling Components LWT Notes Dimensions and technical information are subject to change without notice PRODUCT INNOVATION
19 Lightweight Tooling Components 19 LWT Notes PRODUCT INNOVATION Dimensions and technical information are subject to change without notice
20 Workholding Widest variety of workholding products High durability and reliability Flexible solutions for all applications Custom products for unique requirements Automation Broad range of engineered automation products Complementary products for modular integration Unmatched accuracy, reliability and performance Unparalleled global sales, service and engineering support GLOBAL LOCATIONS NORTH AMERICA DE-STA-CO Headquarters Auburn Hills, Michigan Tel: Toll Free: DESTACO Marketing: Customer Service: Charlevoix, Michigan Tel: DESTACO Customer Service: Wheeling, Illinois Tel: Customer Service: Red Wing, Minnesota (Central Research Laboratories) Tel: Customer Service: SOUTH AMERICA Brazil Tel: Customer Service: ASIA Thailand Tel: Customer Service: China Tel: Customer Service: India Tel: Customer Service: EUROPE Germany Tel: Customer Service: France Tel: Customer Service: UK Tel: Customer Service: Spain Tel: Customer Service: Netherlands Tel: Customer Service: 1025 Doris Road Auburn Hills, MI USA Te l DESTACO Fax Em ai l customerservice@ Copyright, 2012 DE-STA-CO. All rights for layout, photos and text rest with the publisher DE-STA-CO. All photomechanical or other reproductions only with our express permission. All sales are based on our terms and conditions of sale, delivery and payment. DSC_LWT-C_0113_US_XXK www. For more information, please contact us at marketing@ For INDEXING more in- INNOVATION
ACCELERATE YOUR PRODUCTIVITY. Lightweight Tooling Catalog. destaco.com. STAY Informed STAY Connected STAY Productive
ACCELERATE YOUR PRODUCTIVITY Lightweight Tooling Catalog STAY Informed STAY Connected STAY Productive 2 Lightweight Tooling Components LWT Notes Netherlands Charlevoix, MI USA UK Red Wing, MN USA Wheeling,
ONE WORLD. ONE CLAMP. YOUR WAY. The Most Flexible and Complete Family of Clamps. 52H-3E Series Enclosed Manual Clamp. destaco.com
ONE WORLD. ONE CLAMP. YOUR WAY. The Most Flexible and Complete Family of Clamps 52H-3E Series Enclosed Manual Clamp 2 A Global Presence Netherlands Charlevoix, MI USA UK Red Wing, MN USA Wheeling, IL USA
ONE WORLD. ONE CLAMP. YOUR WAY. The Most Flexible and Complete Family of Clamps. 82M-3E Series Enclosed Power Clamp. destaco.com
ONE WORLD. ONE CLAMP. YOUR WAY. The Most Flexible and Complete Family of Clamps 82M-3E Series Enclosed Power Clamp destaco.com 2 A Global Presence Netherlands Charlevoix, MI USA UK Red Wing, MN USA Wheeling,
PRODUCTS FOR ROTATIONAL MOLDERS. Product Catalog. destaco.com
PRODUCTS FOR ROTATIONAL MOLDERS Product Catalog 2 A Global Presence Netherlands Charlevoix, MI USA UK Red Wing, MN USA Wheeling, IL USA Auburn Hills, MI USA France Germany Spain China Brazil India Thailand
DE-STA-CO VACUUM PRODUCTS
Vacuum Cups Cup Mounts DE-STA-CO VACUUM PRODUCTS MARCH 2009 Manifolds CAD FILES AVAILABLE ONLINE Vacuum Products Table of Contents Vacuum Cups US Patent# 7,309,089 Vacuum Cup Families and Features...Page
Rapid Transfer Port. Safe. Clean. Flexible. destaco.com. End Effectors Grippers Indexers. Manual Clamps Power Clamps Remote Handling
Safe. Clean. Flexible. End Effectors Grippers Indexers Manual Clamps Power Clamps Remote Handling destaco.com Remote Handling About DESTACO Netherlands Red Wing, MN USA Wheeling, IL USA Auburn Hills, MI
Clamping Technology. destaco.com VOL. 1 MANUAL PNEUMATIC ûÄǺ¹ Ñ ÄÃú ɺ¹ Ñ ÇÄ¹Ê É¾Ëº
Clamping Technology VOL. 1 MANUAL PNEUMATIC ûÄǺ¹ Ñ ÄÃú ɺ¹ Ñ ÇÄ¹Ê É¾Ëº i-1 A Global Presence Charlevoix, Michigan Großbritannien Niederlande Red Wing, Minnesota Auburn Hills, Michigan Deutschland Wheeling,
Compact. Flat. Productive. Compact Change System CWS
CWS Compact. Flat. Productive. Compact Change System CWS Compact manual change system with integrated air feed-through for the most important SCHUNK gripping and compensating modules. Field of Application
Modular Gripping Products. Modular Gripping Products Introduction
Modular Gripping Products Introduction GR84 Enclosed Modular Mini-Clamp Offers several different jaw and tip options. Can be flange or cylinder mounted. High clamping force and fast opening and closing
GR1-15 Series. Sheet Metal Grippers Ordering Information GR1-15 BE DPP - MXX - XXX - XXX
Sheet Metal Grippers Ordering Information GR1-15 BE - 045 - DPP - MXX - XXX - XXX Cylinder Type & Porting Step 1 - Cylinder Type Choose One B B C B E Flange Base Round Cylinder C Jaw Arrangement Options
Facts and figures MULTILIFT V 6
Facts and figures MULTILIFT V 6 www.arburg.com MULTILIFT V 6 Technical data F Stroke X-axis 3) Stroke Z-axis 1) Clamping face fixed mould platen E A K 4) Stroke Y axis 2) D 2) 156 B 4) C 2)4) 123 P 1)
HR2610/ HR2611F/ HR2610T/ HR2611FT Combination Hammers 26mm (1")
TECHNICAL INFORMATION Model. Description HR2610/ HR2611F/ HR2610T/ HR2611FT Combination Hammers 26mm (1") CONCEPT AND MAIN APPLICATIONS HR2610 series models are 26mm (1") combination hammers adapted for
Gear Pumps/Motors Series PGP/PGM 500
Gear Pumps/Motors Series PGP/PGM 500 Express Delivery Program Note This document and other information from Parker Hannifin GmbH, its subsidiaries, sales offices and authorized distributors provide product
Pneumatic Torque Motors
Pneumatic Torque Motors Contents and Torque Motor Selection Contents Torque Motor Selection... page 2 Torque Controlled Shut Off... page 4 SC Series... page 4 SD Series... page 6 F Series... page 8 Accessories...
Piston Pumps Series P2 / P3 Variable Displacement
Piston Pumps Series P2 / P3 Variable Displacement Catalogue HY11-2600/UK July 2003 Contents Series P2/P3 Description Technical information 3 Ordering code 4 Control options LA and LB 6 Control options
Introduction... i-3 i-6 Manual Clamping Technology... Section Vertical Hold Down Clamps. 2 Horizontal Hold Down Clamps
Table of Contents i-2 Introduction.................................................. i-3 i-6 Manual Clamping Technology................................. Section 1 9 1 Vertical Hold Down Clamps 2 Horizontal
I n n o v a t i o n s
Innovations 2017 FRENCH INDUSTRIAL LEADER has brought innovating solutions to the industry. Our approach offers a complete freedom of design thanks to a unique range of flat belt conveyor and modular transfer
Spare Parts List Series VP04 Pneumatic Remote Control Valve
Pneumatic Remote Control Valve Publication No HY17-8820/UK July 2004 Conversion factors 1 kg = 2.2046 lb 1 N = 0.22481 lbf 1 bar = 14.04 psi 1 l = 0.21997 UK gallon 1 l = 0.26417 US gallon 1 cm = 0.061024
QUICK-CHANGE 5-AXIS WORKHOLDING
QUICK-CHANGE 5-AXIS WORKHOLDING THE 5-AXIS WORKHOLDING SOLUTION Top Tooling Connect directly to the Quintus Quick-Change Riser Blank Fixture Plate 5-Axis Vise Multifunction Fixture Plate Quintus Quick-Change
Facts and figures INTEGRALPICKER V.
Facts and figures INTEGRALPICKER V www.arburg.com INTEGRALPICKER V Technical data Stroke, X-axis F Stroke, Y axis Clamping surface fixed mould platen A H K D C B 135 G P Ejection chute B-axis M N L 2 Technical
Facts and figures MULTILIFT SELECT 6
Facts and figures MULTILIFT SELECT 6 www.arburg.com MULTILIFT SELECT 6 Technical data Stroke X-axis min. 100 Stroke Z-axis Clamping face, fixed mould platen 190 A D K Stroke Y axis 156 B 2) C 123 P G L
GRA GRV SERIES GRA PARALLEL GRIPPERS SERIES GRV ANGULAR GRIPPERS. Compact Precision Grippers Ideal for a Wide Range of Applications
GRA GRV SERIES GRA PARALLEL GRIPPERS SERIES GRV ANGULAR GRIPPERS Compact Precision Grippers Ideal for a Wide Range of Applications Series GRA Parallel Series GRV Angular GRAV0 ORDERING DATA: SERIES GRA
reliable actuators to
reliable actuators to & Fit Forget Pneumatic Rack & Pinion Actuators a new look Reliable As Ever 40 years of success and still delivering The EL-O-Matic F-Series actuator is the result of 40 years of production
Parts Manual EN PL /18/ L41 Series Inline Extended Grinders
Parts Manual 45-8188EN PL30-850 12L41 Series Inline Extended Grinders For additional product information visit our website at http://www.apextoolgroup.com 45-8188EN Dotco Nomenclature 12 L 4 1 XX - XX
telemanipulators Remote Handling About DESTACO
Remote Handling About DESTACO Netherlands UK Auburn Hills, MI USA Red Wing, MN USA France Mt. Juliet, TN USA Wheeling, IL USA Germany China Spain India Thailand Brazil THE BEST PRODUCTS. UNMATCHED SERVICE.
LM5200 MILLING MACHINE
LM5200 MILLING MACHINE Linear and Gantry Milling in one machine, for X-Axis travel of up to 84 inches (2133.6 mm) and Y-Axis travel of up to 34 inches (863.6 mm). 04 2018 LM52 The Climax LM5200 Milling
SentronicPLUS IO-Link CLASS A Electronic Pressure Regulator. Installation Manual
SentronicPLUS IO-Link CLASS A Electronic Pressure Regulator Installation Manual Sentronic PLUS ASCO NUMATICS Sentronic PLUS Electronic Pressure Regulator Sentronic PLUS is a 3-way proportional valve with
LM5200 MILLING MACHINE
LM5200 MILLING MACHINE 2017 12 LM52 Linear and Gantry Milling in one machine, for X-Axis travel of up to 84 inches (2133.6 mm) and Y-Axis travel of up to 34 inches (863.6 mm). The Climax LM5200 Milling
Multi Function Efficient Dynamic Altitude Simulation MEDAS
Multi Function Efficient Dynamic Altitude Simulation MEDAS BENEFITS A wide simulation range and extreme flexibility SIMULATE POSITIVE & NEGATIVE PRESSURE One system for positive & negative pressure Steady
Spare Parts List PCL4 01/02/04/05
PCL 01/02/0/0 Hydraulic Proportional Remote Control Valve Series Publication No HY17-13/UK April 200 Conversion factors 1 kg = 2.20 lb 1 N = 0.221 lbf 1 bar = 1.0 psi 1 l = 0.21997 UK gallon 1 l = 0.217
MULTI FUNCTION EFFICIENT DYNAMIC ALTITUDE SIMULATION MEDAS
MULTI FUNCTION EFFICIENT DYNAMIC ALTITUDE SIMULATION MEDAS 2 ACCURATE DYNAMIC EFFICIENT Altitude simulation for R&D The topic of Real Driving Emissions (RDE) is becoming more and more impor tant. Accurate
PVG Open Loop Pumps. Bulletin G
PVG Open Loop Pumps Bulletin 4709-G Table of Contents Performance Assurance page 3 Features and Benefits 4-5 Specifications 6 Shaft Torque Ratings 7 Pressure Pick-ups 7 Table of Contents Controls 8-9 Performance
75RM-2024 Right Angle Fixtured Nutrunner
Instruction Manual PL12-1092EN 75RM-2024 Right Angle Fixtured Nutrunner For additional product information visit our website at http://www.apextoolgroup.com Cleco Product Information PL70-1092EN The original
Multi-Stage Air Powered Vacuum Pumps
Multi-Stage Powered Pumps The MSP Series Multi-Stage Pneumatically-Driven Pumps operate on the Venturi Principle. These pumps are designed for applications requiring high flows at moderate vacuum levels.
PGN-plus. Universal Gripper Universal 2-finger parallel gripper with large gripping force and high maximum moments thanks to multi-tooth guidance.
PGN-plus Sizes 40 380 Weight 0.08 kg 39.5 kg Gripping force 123 N 21150 N Stroke per finger 2 mm 45 mm Workpiece weight 0.62 kg 80.5 kg Application example Pick-and-place unit for light to medium-weight
Technical Data Sheet PS , Rev C May Micro Motion R-Series Coriolis Flow and Density Meters
Technical Data Sheet PS-001945, Rev C May 2017 Micro Motion R-Series Coriolis Flow and Density Meters R-Series Coriolis Flow Meters May 2017 Detailed Specifications R-Series accuracy Model Liquid mass
FROST. Components and Services for Power & Free Systems ALUMINUM
FROST Components and Services for Power & Free Systems ALUMINUM Frost Company Introduction Frost Incorporated Founded: 1913 Located: 2020 Bristol, N.W. Grand Rapids, MI 49504 Tel: 1.616.453.7781 Fax: 1.616.453.2161
Global Overview of Middle Distillates Supply and Demand ICE Market Forum Rotterdam, November 2012
Global Overview of Middle Distillates Supply and Demand ICE Market Forum Rotterdam, November 2012 About Petromatrix Based in Switzerland (city of Zug) Publishes a daily newsletter on oil markets Mix of
YIH CHUAN MACHINERY INDUSTRY CO., LTD No.8, 9th Rd., Taichung Industrial Park, Taichung, Taiwan :
YIH CHUAN MACHINERY INDUSTRY CO., LTD Headquarters 40755 No.8, 9th Rd., Taichung Industrial Park, Taichung, Taiwan : +886-4-2359-3351 TEL FAX : +886-4-2359-0012 E-mail : extron@extroncnc.com www.extroncnc.com
Company Profile. Continuous Innovation!! Global Market Net. Global market covers 5 continents More than 30 nations. Prompt Delivery.
Company Profile High Value High Quality Prompt Delivery Continuous Innovation!! EXTRON is a worldwide brand for Yih Chuan Machinery Industry Co., Ltd. It was founded in 1972, in Taiwan, specialized in
12-10 Series Inline Grinder
Parts Manual 45-858EN 2-0 Series Inline Grinder Termination -36 Terminations -4 and -6 For additional product information visit our website at http://www.apextoolgroup.com 45-858EN Dotco Nomenclature and
Vacuum Generator ECBPi
NEW Intelligent, Autonomous and Flexible Vacuum Generation Vacuum Generator ECBPi WWW.SCHMALZ.COM/ECBPI Intelligent Collaboration Redefined. Intelligent, Autonomous and Flexible Vacuum Generation for Collaborative
Product Information. Compact linear module ELS
Product Information ELS ELS Modular. Compact. Precise. ELS compact linear module with spindle drive and profiled rail guide Field of application For use in clean and slightly polluted environments. Simple
pneumatic swing clamps
pneumatic swing clamps Sizing and Application Chart Series Standard Features Bore Clamping Clamping Force [lbf.]n 90 Series [0.86] 22 [0.] 13 [34] 0 Arm rotates at the top of stroke Shielded rod protects
0 to 100 up to 0 to PSI (gage) Packard Electric Metri-Pack 150 Series, M12-4 Pole* 1/4-18 NPT ma, VDC, 0-5 VDC, 0-10 VDC
Data Sheet PTA5000 Hermetically Sealed Modular Pressure Sensor Main Features Pressure Ranges Electrical Connection Pressure Connection 0 to 100 up to 0 to 10.000 PSI (gage) Packard Electric Metri-Pack
EROWA MTS The EROWA MTS modular workholding system.
EROWA MTS The EROWA MTS modular workholding system. Reduce set-up time! System solutions from one single source EROWA MTS The flexible zero point palletizing system for production. Vertical Machining Centers
Linear Torque Limiting Clutch
LM Series Features & Options Linear Torque Limiting Clutch Innovation Description & Operation Sankyo's LM Series offers adjustable torque limiting in any linear axis. It mounts directly to linear slide
HES810 ULTRA-PRECISION HIGH-SPEED MILLING SPINDLE
ispeed E0 E0 E00 E000 ø0." ø0.9" ø0." ø0.9" HES0 -p0 ULTRA-PRECISION HIGH-SPEED MILLING SPINDLE Specifications Speed... 0,000-0,000 min - (rpm) Ideal Operating Speed... 0,000-0,000 min - (rpm) Max. Output
GRH SERIES GRH PARALLEL GRIPPERS. Long Jaw Travel, Low Profile Gripper with Large Moment Capacities
GRH SERIES GRH PARALLEL GRIPPERS Long Jaw Travel, Low Profile Gripper with Large Moment Capacities Wide Jaw Guide System for Minimal Tooling Deflection Million Cycle Life Flexible Mounting Optional Multi-Position
Market Briefing: Mergers & Acquisitions World, Region, & Country
Market Briefing: Mergers & Acquisitions World, Region, & Country January 2, 217 Dr. Edward Yardeni 16-972-7683 eyardeni@ Joe Abbott 732-497-36 jabbott@ Please visit our sites at www. blog. thinking outside
5AX Rotary Table TAP
All Features of Product Line 5 Included NEW Swiss Rotary Table Technology A winner in terms of technology, space and price perfect for small and medium-sized machining centers TAP rotary tables 5.216 1
Double Blank Analyzer (DBA)
Auto In-plant Detecting Ferrous & Non-ferrous Double Blanks ngren.com/automationsolutions Ngren Automation Solutions, LLC 2 Contents 3 Engineering GREAT Solutions through people, products, innovation and
LM6200 milling machine
LM6200 milling machine Linear and Gantry Milling in one machine, with x-axis travel up to 176 inches (4470.4 mm) and y-axis travel up to 106 inches (2692.4 mm) 4 2013 LM62 The Climax LM6200 Milling Machine
TRANSPORTATION ADVANCED MATERIALS AND ELECTRICAL POWER SOLUTIONS FOR AERONAUTICS
TRANSPORTATION ADVANCED MATERIALS AND ELECTRICAL POWER SOLUTIONS FOR AERONAUTICS MATERIAL EXPERTISE FOR HIGH TEMPERATURE AND WEIGHT SAVINGS As a worldwide leader of high performance materials, Mersen has
GRM SERIES GRM CLAMPS R JAW STYLE. Compact Jaw Profi le for Limited Space Applications Largest Total Clamp Force of All Series GRM2 Clamps GRMR01
GRM SERIES GRM CLAMPS R STYLE Compact Jaw Profi le for Limited Space Applications Largest Total Clamp Force of All Series GRM2 Clamps ORDERING DATA: SERIES GRM CLAMP STYLE R INDEX: Ordering Data Page 2
DYNAS3 LEADING SOLUTIONS FOR DYNAMIC ENGINE TESTING. Explore the future
LEADING SOLUTIONS FOR DYNAMIC ENGINE TESTING DYNAS3 Explore the future Automotive Test Systems Process & Environmental Medical Semiconductor Scientific 2 DYNAS 3 Best-in-class AC dynamometers The HORIBA
Circled numbers are Forward Axle Assembly parts. SUPPLEMENTAL DRAWING CARRIERS WITH INTERNAL A.B.S.
Circled numbers are Forward Axle Assembly parts. SUPPLEMENTAL DRAWING CARRIERS WITH INTERNAL A.B.S. FIGURE 1 FORWARD CARRIERS OF TANDEM AXLES (USE WITH CHART 1) Circled numbers are diff. lock parts or
Hydraulic Power Units 108 Series
Hydraulic Power Units 18 Series Catalogue HY17-131/UK March 3 Catalogue HY17-131/UK Content 18 Series Content Page 18 Series hydraulic power units... 3 Typical applications... 3 Ordering code... 4 Information
PNEUMATIC LINEAR ACTUATORS SECTION 1
PNEUMATIC LINEAR ACTUATORS SECTION 1 1-888-638-6337 Typical Applications: Larger versions of these examples are available on the CD-ROM version of our catalog or on our web site: www.meto-fer.com Subject
S Series Technical Data...7 How to Order...8 Dimensions...8 Manifold Dimensions and Part Numbers...9
Miniature Valve Series............................................................3-14 RB Series..................................................................................3-6 Technical Data...................................................................................3
Flex Finger Tooling 100/125 Series
Flex Finger Tooling 100/125 Series FLEX 100/125 Finger Tooling allows quick and easy changeover of tools between new die sets. Our modular components are simple to configure due to the ability to adjust
GSM. Modular Design. Versions of the series. Type GSM. Gripper type P Z W R. Size. {} AS IS without O.D. clamping I.D. clamping
GSM Pneumatic Gripper-Swivel System Modular Design Versions of the series Type GSM Gripper type P Z W R Size 32 40 50 64 30 38 45 16 20 25 32 40 16 20 25 32 40 Gripping force safety device {} AS IS without
Test Probes Test Fixtures INGUN. Test Fixtures for low PCB volumes. Change made easy
Test Probes Test Fixtures INGUN Test Fixtures Change made easy MA 350/F with customized ATS MA350 force up to 300 N up to 160 x 100 mm MA 3xx-series generous and free accessibility MA 360/F with customized
Ultra Light and Compact HVAC
Ultra Light and Compact HVAC Unique compact HVAC to cover from A to C segment Best in Class in Size and Weight Contributes to CO 2 reduction Requirement of light and compact for achievement of regulation
cellent, ustworthy, and on.
cellent, ustworthy, and on. YIH CHUAN MACHINERY INDUSTRY CO., LTD. 8,9 th Rd., Taichung Industrial Park, Taichung, 40755 Taiwan TEL : +886-4-2359-3351 FAX : +886-4-2359-0012 http : //www.extron.com.tw
Drive solutions for the oil and gas industry.
Drive solutions for the oil and gas industry. maxon Heavy Duty drives: Robust design for extreme operating conditions. Founded in Switzerland. Available worldwide. maxon a strong global brand. maxon motor,
la liberté de concevoir MODULAR TRANSFER SYSTEM
la liberté de concevoir MODULAR TRANSFER SYSTEM new PRODUCTS 2012 la liberté de concevoir french industrial leader has brought innovating solutions to the industry. Our approach offers a complete freedom
Stelron PS Indexer. PS Series Parallel Shaft Indexer
Stelron PS Indexer PS Series Parallel Shaft Indexer PS INTRODUCTION INTRODUCTION: The recent introduction of the PS series index drives confirms STELRON s continuing commitment to the design & manufacture
Number of fingers 2. Max. particle size 5 µm. Pressure for determining forces
Bosch Rexroth AG Pneumatics Version Parallel Number of fingers 2 Grip tolerance 0,02 mm Lubrication gripping elements Lubricated for life 00117208 Ambient temperature min./max. +5 C / +60 C Medium Compressed
Modular. Precise. Robust. AGE-S-XYZ Compensation Unit
AGE-S Modular. Precise. Robust. AGE-S-XYZ Compensation Unit Compensation unit compensating in XY- and Z-direction Field of Application Palletizing, joining, and assembly of workpieces Advantages Your benefit
LM6200 MILLING MACHINE
LM6200 MILLING MACHINE 2018 04 LM62 3-Axis Linear and Gantry Milling The CLIMAX LM6200 Linear/Gantry Milling Machine revolutionizes both the capabilities and functionality of portable mills. Four main
NEW. Linear Ball Bushing Bearings and 60 Case Shafting. Profile Rail Linear Guides
Linear Ball Bushing Bearings and 60 Case Shafting Thomson invented the ball bushing bearing over 60 years ago and has since been the recognized leader in this field. Our linear products provide low friction,
Parts Manual PL EN 05/19/ L4321 Router. For additional product information visit our website at
Parts Manual 10L4321 Router For additional product information visit our website at http://www.apextoolgroup.com Product Information The original language of this manual is English. Product Safety Information:
4mm(H)x8mm(W) Micro LM Guides
4mm(H)x8mm(W) Micro LM Guides US, EPC, Patent Pending CATALOG No.293E Micro LM Guides RSR3M/3N The micro size allows space-saving design. Can be used in various fields of industry including micro machines
15K Series Extented Mini Right Angle Drill Attachment
Parts Manual PL30-2052EN 15K27-5172 Series Extented Mini Right Angle Drill Attachment For additional product information visit our website at http://www.apextoolgroup.com PL30-2052EN Dotco Nomenclature
Parts Manual EN PL30-12R04 07/21/ R04 Series 0.1 HP Inline Pencil Grinder
Parts Manual PL30-12R04 12R04 Series 0.1 HP Inline Pencil Grinder For additional product information visit our website at http://www.apextoolgroup.com Dotco Nomenclature 12 R 04 XX - X X Series 12 = Ergo
Innovative Access Solutions
Innovative Access Solutions Table of Contents Table of Contents Product Description Page Innovative Access Solutions Captive Hinge Access Assembly ERGO Access Assembly ERGO XL Access Assembly 8210 Heavy
Flexible. Modular. Compact. Beta Universal Linear Module
Beta Flexible. Modular. Compact. Beta Universal Linear Module Universal linear module with optional toothed belt or spindle drive and various guiding options. Field of Application Universal linear module
Made UNDER high pressure
Made UNDER high pressure Made FOR high pressure THE CONTRINEX HIGH-PRESSURE-RESISTANT INDUCTIVE SENSOR SERIES Contrinex is a leading international high-tech sensor company with headquarters in Switzerland.
15D Series Pistol Grip and Inline Drills
Parts Manual 823144EN 15D Series Pistol Grip and Inline Drills For additional product information visit our website at http://www.apextoolgroup.com 823144EN Cleco Product Information The original language
Guide Ball Bushing NEW
NEW Guide Ball Bushing Contributes to compact the system Achieves load rating more than twice the Linear Bushing with the same dimensions (model LG-S) Various combinations of nut and shaft are available
Data Sheet P1A Pressure Sensor
Data Sheet P1A Pressure Sensor Main Features 0 to 0.25 up to 0 to 16 bar (gage) Pressure Ranges 0 to 1.6 up to 0 to 16 bar (absolute) -1 to 0 up to -1 to 0 bar (gage) * Electrical Connection Packard Electric
No.1. Side approach mechanism Precise lateral contacting. Catalogue 1.1. Test Probes Test Fixtures
No.1 in testing solutions in der Prüftechnik Test Probes Test Fixtures Side approach Precise lateral contacting Catalogue 1.1 16 mm, 1 N contact force INGUN for precise lateral contacting -controlled operated
82P SERIES 52F SERIES 52R SERIES. CAD FILES AVAILABLE ONLINE
82P SERIES 52F SERIES DE-STA-CO PNEUMATIC PIN CLAMPS SEPTEMBER 2007 52R SERIES www.destaco.com CAD FILES AVAILABLE ONLINE DE-STA-CO Locating Pin Clamps AT A GLANCE Specifications and Table of Contents
Check Type Prefill & Exhaust Valves
Check Type Prefill & Exhaust Valves Bulletin 86620 Table of Contents Performance Assurance page 3 PV Valves Features and Benefits 4-5 Specifications 6-7 Dimensions & Weights 8-12 Performance Curves 13-14
AUTOMOTIVE DIVISION YEARS. Car Manufacturers which use our Clamps. Since 1971 leader in Industrial Automation
Since 1971 leader in Industrial Automation 30 YEARS AUTOMOTIVE DIVISION Car Manufacturers which use our Clamps Pneumatic Automation Automotive www.univer-group.com A single supplier with a complete Pneumatic
Global Economic Briefing: Merchandise Trade
Global Economic Briefing: Merchandise Trade June 27, 18 Dr. Edward Yardeni 516-972-7683 eyardeni@ Debbie Johnson 48-664-1333 djohnson@ Mali Quintana 48-664-1333 aquintana@ Please visit our sites at www.
10R90 Series Light Duty Precision Turbine Grinder
Parts Manual 45-8043 10R90 Series Light Duty Precision Turbine Grinder CAUTION Do Not Lubricate This Tool! For additional product information visit our website at http://www.apextoolgroup.com 45-8043 Dotco
BASICLINE PROGRAM. Standard components for pneumatics. pilot operated check valve. Messing. throttle with click function.
BASICLINE PROGRAM Standard components for pneumatics pilot operated check valve Messing throttle with click function rotary connector 2 Quality solutions - Made by EISELE EISELE IS QUALITY MADE IN GERMANY
FORGED STAINLESS STEEL Rack And Pinion Actuator S Series
FORGED STAINLESS STEEL Rack And Pinion Actuator S Series The Air Torque S Series stainless steel actuators are a corrosion resistant rack and pinion actuator particularly engineered for corrosive environments
PGN-plus. Universal Gripper Universal 2-finger parallel gripper with large gripping force and high maximum moments thanks to multi-tooth guidance.
PGN-plus Sizes 40 380 Weight 0.08 kg 39.5 kg Gripping force 123 N 21150 N Stroke per finger 2 mm 45 mm Workpiece weight 0.62 kg 80.5 kg Application example Pick-and-place unit for light to medium-weight
Bore ø 32, 40, 50, 63, 80, 100, 125 Ports 32 = 1/8, 40/50 = 1/4, 63/80 = 3/8, 100/125 = 1/2
6 S E R I E S Cylinders Series 6 Catalog 2006 Single, double acting, magnetic (DIN/ISO 643) Bore: ø 32, 40, 50, 63, 80, 00, 25 cushioned [ /4, 9/6, 2, 2 /2, 3 /8, 4, 5 inch approximations] The Series 6
RA / Internal Gear Pump Model GP2, Series 2X Fixed Displacement. Typical application:
Sizes 6.3 to 16 Internal Gear Pump Model GP2, Series 2X Fixed Displacement up to 576 PSI.397 to.98 in 3 (35 bar) (6.5 to 16 cm 3 ) RA 1 23/6.97 RA 1 23/6.97 Characteristics: Peak pressure of up to 576
Changeover in seconds!
Changeover in seconds! PZ QUIRI HYDROMECANIQUE 6 Rue Denis Papin 67120 DUTTLENHEIM Tél. : +33 3 88 04 84 00 Fax. : +33 3 88 04 84 01 Email : quiri.hydro@quiri.com QUIRI Hydromécanique is specialized in
Modular. Precise. Robust. AGE-S-XYZ Compensation Unit
Modular. Precise. Robust. AGE-S-XYZ Compensation Unit Compensation unit compensating in XY- and Z-direction. Field of Application Palletizing, joining, and assembly of workpieces Advantages Your benefit
GAM New Products 2018
GAM New Products 218 GPL ROBOTIC PLANETARY GCL ROBOTIC CYCLOIDAL EPR RIGHT ANGLE BEVEL PLANETARY VP PRECISION PLUS SPIRAL BEVEL GAM Can. GAM Company Overview About GAM Founded in 199 by Gary A. Michalek,
31/32 Spring Diaphragm Rotary Actuators
GE Oil & Gas Technical Specifications 08/2012 Masoneilan * Valves 31/32 Diaphragm Rotary Actuators The 31/32 Series actuator is designed to provide high performance, reliability and long service life.
Pressure Switch. Sentinel Series
Pressure Switch Sentinel Series ENGINEERING EXCELLENCE System Controls HS Series Auto reset SPST Pilot Duty Loads Wide variety of pressure fittings, both mechanical and brazed, to suit any application
Compact. Fast. Productive. DRL Lift/Swivel Unit
DRL Compact. Fast. Productive. DRL Lift/Swivel Unit Compact lift/swivel unit consisting of a strong short-stroke cylinder and a rack pinion swivel drive. Field of Application For use in clean and slightly
Premium Torque Arms. Products and Solutions for Assembly
Premium Torque Arms Products and Solutions for Assembly Automation Product Group Engineered Performance The ASG Automation group provides custom solutions to meet both the imminent and inevitable expectations