75RM-2024 Right Angle Fixtured Nutrunner
|
|
- Norah Washington
- 5 years ago
- Views:
Transcription
1 Instruction Manual PL EN 75RM-2024 Right Angle Fixtured Nutrunner For additional product information visit our website at
2
3 Cleco Product Information PL EN The original language of this manual is English. Product Safety Information: Intended Use: This fixtured nutrunner is driven by compressed air to assemble or remove threaded fasteners. For additional product safety information refer to Apex Tool Group, LLC or GmbH & Co. OHG document GS-2000, General Safety Air Assembly Tools. WARNING This nutrunner must not be modified in any manner unless approved in writing by, LLC or GmbH & Co. OHG. All safety devices must be properly installed and maintained in good working order. Abuse, misuse, or failure to obey this and any other issued warnings may result if injury or death. EC Declaration of Conformity: We affirm that this machine is in accordance with the following EC regulations (2006/42/EC). Applied harmonized standards are ISO 12100:2010. The name, job function and address of the person authorized to compile the technical file. Mr. Vishnu Irigireddy Director of Global R&D- Mechanical Engineering 670 Industrial Drive Lexington, SC Grease Application of the nutrunner should determine how frequently it is greased. It is recommended that all gearing receive a generous amount of grease during each service interval. Part No. Packaged Designation A oz. (0.45 kg) Shell Alvania EP oz. (0.45 kg) Chevron Black Pearl EP NLGI Air Supply Line: Parameter Air Hose Working pressure range Compressed air Description Minimum inside diameter: 1/2" (12.7mm) Maximum length: 8' (2.5 m) Performance rated at: 90 psi (620 kpa) Air quality according to ISO , quality class The compressed air must be clean and dry. Service and Repair: Tool service and repair should be performed by an authorized, LLC or GmbH & Co. OHG Center. Refer to the last page of this manual for locations. Disposal: Observe local disposal guidelines for all components of this tool and its packaging. Signature: Vishnu Irigireddy Date: February 20, 2015 Noise and Vibration: Noise: 82 db(a) Vibration: < 2.5 m/s 2 Air Line Lubrication: Use, LLC or GmbH & Co. OHG s lightweight air tool oil (available in quantities shown in the following chart) or an SAE-5 lightweight spindle oil. Copyright Protection:, LLC or GmbH & Co. OHG reserves the right to modify, supplement or improve this document or the product without prior notice. This document may not be reproduced in any way, shape or form, in full or parts thereof, or copied to another natural or machine readable language or to a data carrier, whether electronic, mechanical, optical or otherwise without the express permission of Apex Tool Group, LLC or GmbH & Co. OHG Part No. Packaged Designation Quart (0.94 liter) Airlube 10W/NR-420LB DR US Gallon (3.78 liter) Airlube 10W/NR-420LB DR Page 3
4 PL EN Cleco A 75RM-2024 Motor Housing Assembly Page 4
5 Cleco PL EN Illustration "A": 75RM-2024 Motor Housing Assembly Ref Number # X EN Description PT 1 Motor Housing Assembly (includes Ref. 1-6) PT 2 Inlet Bushing O-Ring (2-1/2" x 2-5/8") PT 1 Deflector Spacer Exhaust Deflector Muffler PT 1 Motor Housing (#) Quantity (X) Recommended (quantity shown based on 1-5 tools in operation) Page 5
6 PL EN Cleco B 75RM-2024 Motor Assembly - Reversible Page 6
7 Cleco PL EN Illustration "B": 75RM-2024 Motor Assembly - Reversible Ref Number # X Set Screw Rotor Lock Nut Ball Bearing Rear Bearing Plate PT 1 Cylinder (includes Ref. 6) Cylinder Pin Drive Screw Rotor Rotor Blade Front Bearing Plate Motor Spacer (#) Quantity (X) Recommended (quantity shown based on 1-5 tools in operation) EN Description Page 7
8 PL EN Cleco C 75RM-2024 Gearing Assembly - Code Page 8
9 Cleco PL EN Illustration "C": 75RM-2024 Gearing Assembly - Code 2 Ref Number # X EN Description Planetary Gear (21T) (includes Ref. 2) Planetary Gear Bearing Planetary Gear Spider (includes Ref. 4) PT 3 Planetary Gear Pin Planetary Gear Cage Planetary Gear (18T) Planetary Gear Roller Plandetary Gear Pin Gear Case (#) Quantity (X) Recommended (quantity shown based on 1-5 tools in operation) (T) Teeth Page 9
10 PL EN Cleco D 75RM-2024 Right Angle Attachment Reaction Bar Assembly Page 10
11 Cleco PL EN Illustration "D": Code 75RM-2024 Right Angle Attachment Ref Number # X EN Description Right Angle Attachment - 3/4" Square Drive (includes Ref. 1-14) Bearing Retainer Ball Bearing Pinion Needle Bearing Gear Set Angle Housing Spindle Needle Bearing Grease Plug Output Spindle - 3/4" Square Drive (includes Ref. 9-11) Spindle Ball Bearing Bearing Cap (includes Ref. 14) Bearing Cap Lock Screw Clamp Ring Clamp Nut PT 1 Reaction Bar Bracket Reaction Bar Clamp Reaction Bar Bolt Reaction Bar Jam Nut (#) Quantity (X) Recommended (quantity shown based on 1-5 tools in operation) Page 11
12 Sales & Service Centers Note: All locations may not service all products. Please contact the nearest Sales & Service Center for the appropriate facility to handle your service requirements. Brazil Ind. Com. Ferram. Ltda Av. Liberdade, 4055 Zona Industrial Iporanga Sorocaba, São Paulo CEP# Brazil Tel: Fax: Canada Apex Tool Canada, Ltd Sales & Service Center 7631 Bath Road Mississauga, Ont. L4T 3T1 Canada Tel: (866) Tel: (905) China Apex Power Tool Trading (Shanghai) Co., Ltd Building A8, No. 38 Dongsheng Road Pudong, Shanghai China Tel: Fax: England GmbH & Co. OHG C/O Spline Gauges Piccadilly, Tamworth Staffordshire B78 2ER United Kingdom Tel: Fax: France SAS 25 rue Maurice Chevalier B.P Ozoir-La-Ferrière Cedex, France Tel: Fax: Germany GmbH & Co. OHG Industriestraße Westhausen Germany Tel: +49 (0) Fax: +49 (0) Hungary Hungaria Kft Platànfa u Györ Hungary Tel: Fax: India Apex Power Tools India Private Limited Gala No. 1, Plot No. 5 S. No. 234, 235 & 245 Indialand Global Industrial Park Taluka-Mulsi, Phase I Hinjawadi, Pune Maharashtra, India Tel: Mexico Manufacturing México S. de RL de CV Vialidad El Pueblito #103 Parque Industrial Querétaro Querétaro, QRO CP# Mexico Tel: +52 (442) Fax: +52 (800) USA - Detroit, Michigan Sales & Service Center 2630 Superior Court Auburn Hills, MI Tel: (248) Fax: (248) USA - Lexington, South Carolina 670 Industrial Drive Lexington, SC Tel: (800) Tel: (803) Fax: (803) USA - Los Angeles, California Sales & Service Center 6881 Stanton Avenue Unit B Buena Park, CA Tel: (714) Fax: (714) USA - Seattle, Washington Sales & Service Center nd Avenue N.E Redmond, WA Tel: (425) Fax: (425) USA - York, Pennsylvania Sales & Service Center 3990 East Market Street York, PA Tel: (717) Fax: (717) , LLC 1000 Lufkin Road Apex, NC Phone: Fax: PL EN/Printed in USA 02/2015/Copyright, LLC
12-10 Series Inline Grinder
Parts Manual 45-858EN 2-0 Series Inline Grinder Termination -36 Terminations -4 and -6 For additional product information visit our website at http://www.apextoolgroup.com 45-858EN Dotco Nomenclature and
More information10R90 Series Light Duty Precision Turbine Grinder
Parts Manual 45-8043 10R90 Series Light Duty Precision Turbine Grinder CAUTION Do Not Lubricate This Tool! For additional product information visit our website at http://www.apextoolgroup.com 45-8043 Dotco
More information15D Series Pistol Grip and Inline Drills
Parts Manual 823144EN 15D Series Pistol Grip and Inline Drills For additional product information visit our website at http://www.apextoolgroup.com 823144EN Cleco Product Information The original language
More informationParts Manual EN PL /18/ L41 Series Inline Extended Grinders
Parts Manual 45-8188EN PL30-850 12L41 Series Inline Extended Grinders For additional product information visit our website at http://www.apextoolgroup.com 45-8188EN Dotco Nomenclature 12 L 4 1 XX - XX
More information21L1341 Series Inline Vent Trimmer
Parts Manual 21L1341 Series Inline Vent Trimmer For additional product information visit our website at http://www.apextoolgroup.com Nomenclature Includes (Illustration "B") Model Vent Trimmer Drive Pinion
More information15K Series Extented Mini Right Angle Drill Attachment
Parts Manual PL30-2052EN 15K27-5172 Series Extented Mini Right Angle Drill Attachment For additional product information visit our website at http://www.apextoolgroup.com PL30-2052EN Dotco Nomenclature
More information14PTA & 14TTA Series Pistol Grip Nutrunners
Parts Manual 4PTA & 4TTA Series Pistol Grip Nutrunners 4PTA Series 4TTA Series For additional product information visit our website at http://www.apextoolgroup.com Product Information The original language
More informationParts Manual EN PL30-12R04 07/21/ R04 Series 0.1 HP Inline Pencil Grinder
Parts Manual PL30-12R04 12R04 Series 0.1 HP Inline Pencil Grinder For additional product information visit our website at http://www.apextoolgroup.com Dotco Nomenclature 12 R 04 XX - X X Series 12 = Ergo
More information10LF and 12LF Series Right Angle Grinders
Product Manual 10LF and 12LF Series Right Angle Grinders XX L F 2 XX - XX Tool Series 10 = Aluminum Housing 12 = Ergo Housing Throttle Type L = Locking Lever Motor Size F = 0.4 hp Handle Style 2 = Right
More informationParts Manual PL EN 05/19/ L4321 Router. For additional product information visit our website at
Parts Manual 10L4321 Router For additional product information visit our website at http://www.apextoolgroup.com Product Information The original language of this manual is English. Product Safety Information:
More informationN60 Rotary Vane Pneumatic Motor
Parts Manual PL70-1043EN 24-1312N60 Rotary Vane Pneumatic Motor For additional product information visit our website at http://www.apextoolgroup.com PL70-1043EN Cleco 24-1312N60 Rotary Vane Motor Model
More information10N10 Series Inline Grinder
Parts Manual 0N0 Series Inline Grinder For additional product information visit our website at http://www.apextoolgroup.com Nomenclature and Specifications Product Type 0 = Aluminum Housing Grinder Throttle
More information14TTA-2311 Pistol Grip Clecomatic Clutch Nutrunner
Parts Manual 14TTA-2311 Pistol Grip Clecomatic Clutch Nutrunner For additional product information visit our website at http://www.apextoolgroup.com Model Nomenclature A 14 T T A - 2311 Tool Series 14
More informationA6R-2218 Reversible Axial Piston Power Motors
Instruction Manual A6R-2218 Reversible Axial Piston Power Motors For additional product information visit our website at http://www.apextoolgroup.com Nomenclature Model Number Maximum Allowable RPM * Stall
More information10N M6 Series Right Angle Grinder
Parts Manual PL30-2042EN 10N1200-36M6 Series Right Angle Grinder For additional product information visit our website at http://www.apextoolgroup.com PL30-2042EN Dotco Nomenclature and Specifications Product
More informationProduct Manual PL31-15LF 04/02/ LF Series Inline Grinders
Product Manual PL31-15LF 15LF Series Inline Grinders 15 L F 0 X X - XX NL Tool Series 15 = Drill Throttle Type L = Locking Lever Motor Size F = 0.4 hp Handle Style 0 = Straight Exhaust Type 5 = Front Exhaust
More information10LF and 12LF Series Right Angle Grinder and Sander
Product Manual 4-842EN 10LF and LF Series Right Angle Grinder and Sander For additional product information visit our website at http://www.apextoolgroup.com 4-842EN Dotco Nomenclature XX L F 2 XX - XX
More informationParts Manual EN
Parts Manual 45-8213EN PL30-1212 12L12 and 12S12 Series 0.3 HP Right Angle Grinder/Sander For additional product information visit our website at http://www.apextoolgroup.com 45-8213EN Dotco Nomenclature
More information14RA Series Right Angle Nutrunners
Parts Manual 822EN RA Series Right Angle Nutrunners For additional product information visit our website at http://www.apextoolgroup.com 822EN Cleco General Information anguage Version: This Parts Manual
More informationA6R-2221 Reversible Axial Piston Power Motor
Instruction Manual A6R-2221 Reversible Axial Piston Power Motor For additional product information visit our website at http://www.apextoolgroup.com Nomenclature Model Number Maximum Allowable RPM Stall
More informationAiretool. Gas Line Cleaners Range: 3/4 (19.05mm) to 1-1/2 (38.10mm) Operating & Service Manual PL EN 10/01/2015
Operating & Service Manual PL9-6026EN 0/0/205 Airetool Gas Line Cleaners Range: 3/4 (9.05mm) to -/2 (38.0mm) For additional product information visit our website at http://www.apextoolgroup.com PL9-6026EN
More informationParts Manual EN
Parts Manual PL30-1211 12-11 Series Inline Extended Grinders For additional product information visit our website at http://www.apextoolgroup.com Nomenclature 12 X 1 1 XX - 36 XX OH Tool Series 12 = Ergo
More informationParts Manual EN
Parts Manual 4-83EN PL30- - Series Right Angle Grinder, Sander, and Router For additional product information visit our website at http://www.apextoolgroup.com 4-83EN Dotco Nomenclature X XX - XX XX XX
More information35 Series Screwdrivers
Parts Manal 823121EN 35 Series Screwdrivers For additional product information visit our website at http://www.apextoolgroup.com 823121EN Cleco Description Language Version: This Parts Manual is the Original
More information88 Series Inline and Pistol Grip Screwdrivers
Parts Manual 823018EN 88 Series Inline and Pistol Grip Screwdrivers For additional product information visit our website at http://www.apextoolgroup.com 823018EN Cleco Nomenclature 88 XXX A XX - X C X
More informationParts Manual PL
Parts Manual PL30-027-7 45-828 03/0/20 0L27 & 0K27 Series Low Profile Right Angle Grinder/Sander 2 Series Handles Shown Throttle Type Free Speed (RPM) Grinders / Sanders Termination 2,000 3,500 4,500 Type
More information21 Series Double Reduction Rotary Vane Power Motors
Instruction Manual 45-8059EN Series Double Reduction Rotary Vane Power Motors For additional product information visit our website at http://www.apextoolgroup.com 45-8059EN Cleco General Information For
More information19RA Series Right Angle Nutrunner
Parts Manual P12-1014EN 19RA Series Right Angle Nutrunner For additional product information visit our website at http://www.apextoolgroup.com P12-1014EN Cleco Model Nomenclature A 19 R A X XX XX X Tool
More informationB4R Series Reversible Axial Piston Power Motors
Instruction Manual B4R Series Reversible Axial Piston Power Motors For additional product information visit our website at http://www.apextoolgroup.com Nomenclature Model Number Maximum Allowable RPM Stall
More information48EP Series Electronically Controlled Pistol Grip Nutrunner
Parts Manual PL2EN-48EP- 0/09/202 48EP Series Electronically Controlled Pistol Grip Nutrunner For additional product information visit our website at http://www.apextoolgroup.com PL2EN-48EP- 0/09/202 Cleco
More informationAiretool. 999-C-45 ( ) Electric Rolling Motor. Operating & Service Manual PL EN 01/26/2012
Operating & Service Manual PL19-6009EN 999-C-45 (8405492) Electric Rolling Motor For additional product information visit our website at http://www.apextoolgroup.com PL19-6009EN Description Tool Specifications
More informationMA3W-2238 Radial Piston Power Motor
Parts Manual MA3W-2238 Radial Piston Power Motor For additional product information visit our website at http://www.apextoolgroup.com Specifications and Description Specifications Table: Model Maximum
More information48EP Series Electronically Controlled Pistol Grip Nutrunner
Parts Manual PL2EN-8EP /0/20 8EP Series Electronically Controlled Pistol Grip Nutrunner For additional product information visit our website at http://www.apextoolgroup.com PL2EN-8EP /0/20 Cleco General
More informationSW100PRY220 ( ) Reversible Pistol Grip Swivel Reaction Bar Nutrunner
Parts Manual PL2-029EN Formerly: PC-468-5080 SW00PRY220 (4685080) Reversible Pistol Grip Swivel Reaction Bar Nutrunner Caterpillar # 8T-590 For additional product information visit our website at http://www.apextoolgroup.com
More informationTechnical Information Cutting Speeds
Technical Information Cutting Speeds Speed, Feed & Power Please use the chart below as a guide only. Many variables contribute to the optimum parameters for each application. These variables include: particular
More informationParts Manual PL C 12/28/2010. MP4400 Series (Type 4) Random Orbital Sander. Non-Vacuum Models. Vacuum Models MP 44 XX - XX XX
Parts Manual MP4400 Series (Type 4) Random Orbital Sander Non-Vacuum Models Vacuum Models MP 44 XX - XX XX Orbit Pattern 00 = 3/6" Offset (Black Handle) - Standard Sanding Orbit 03 = 3/32" Offset (Chrome
More informationMM Series Radial Piston Power Motors
Instruction Manual MM Series Radial Piston Power Motors For additional product information visit our website at http://www.apextoolgroup.com Specifications Model Number Maximum Allowable Stall Starting
More information10LF and 12LF Series Right Angle Grinder and Sander
Product Manual 4-42 0LF and LF Series Right Angle Grinder and Sander For additional product information visit our website at http://www.apextoolgroup.com 4-42 Dotco Nomenclature XX L F 2 XX - XX XX XX
More informationParts Manual EN
Parts Manual 4- PL0- - Series Right Angle Grinder, Sander, and Router For additional product information visit our website at http://www.apextoolgroup.com 4- Dotco Nomenclature X XX - XX XX XX OH Product
More informationMR30 Series Rotary Vane Power Motors
Instruction Manual PL70-1057EN MR30 Series Rotary Vane Power Motors For additional product information visit our website at http://www.apextoolgroup.com PL70-1057EN Cleco General Information For this Instruction
More information41NDR Series Air Shut-Off Ratchet Wrench
Instruction Manual PL17EN-41NDR 41NDR Series Air Shut-Off Ratchet Wrench For additional product information visit our website at http://www.apextoolgroup.com PL17EN-41NDR Cleco General Information For
More informationCorded Electric Assembly Tools 1 MILLION CYCLES MAINTENANCE-FREE*
Corded Electric Assembly Tools 1 MILLION CYCLES MAINTENANCE-FREE* Get Ready to Streamline Your Assembly Line. Streamline your assembly line and increase your return on investment. Manufacturing solutions
More information19P & 19T Series Pistol Grip Screwdrivers
Service Manual P12-1012EN 19P & 19T Series Pistol Grip Screwdrivers 19P Series 19T Series For additional product information visit our website at http://www.apextoolgroup.com P12-1012EN Cleco General Information
More information1700 and 1900 Series Horizontal Grinders
Instruction Manual 823136EN 1700 and 1900 Series Horizontal Grinders For additional product information visit our website at http://www.apextoolgroup.com 823136EN Cleco General Information For this Instruction
More informationDC Electric Assembly Tools
APTOOL.RU Phone: +7 (495) 723-19-55 Please note that all locations may not service all products. Please contact the nearest Apex Tool Group Sales & Service Center for the appropriate facility to handle
More information20PTHH Pulse shut-off nutsetter
Instruction Manual P2121BA/EN 2014-06 20PTHH Pulse shut-off nutsetter For additional product information visit our website at http://www.apexpowertools.eu Notes on this instruction manual The original
More informationAiretool Airetrol Rolling Motor. Operating & Service Manual IM 03/23/2012
Operating & Service Manual 90074-IM 1550-900 Airetrol Rolling Motor For additional product information visit our website at http://www.apextoolgroup.com 90074-IM Description Free Speed Maximum Torque Minimum
More informationBalance Arms Air Cylinder and Spring Models
Parts Manual 8385 0/06/0 Balance Arms Air Cylinder and Spring Models For additional product information visit our website at http://www.apextoolgroup.com Safety Recommendations For your safety and the
More informationAiretool. ATP III Electric/Hydraulic Pump. Instruction Manual PL EN 05/15/2015
Instruction Manual PL19-6000EN ATP III Electric/Hydraulic Pump For additional product information visit our website at http://www.apextoolgroup.com PL19-6000EN Specifications Pump Model Motor Motor Voltage
More informationAiretool. 720 Series Airetrol Rolling Motor. Operating & Service Manual IM 05/11/2011
Operating & Service Manual 90014-IM 05/11/2011 Airetool 720 Series Airetrol Rolling Motor Model Number Part Number (Order) 720-550-B 8405391 720-1800-B 8405383 720-2500-B 8405541 For additional product
More informationSP-1037EN M. Durable Production Performance. CurrentControl For Quality Critical Joints
SP-1037EN 0208 7.5M Durable Production Performance CurrentControl For Quality Critical Joints Cleco CurrentControl 18 & 48 Series Durability. Spee Cost Effective Solution for Quality Critical Applications.
More informationAutomated Systems. AutomatedSystems. Your Global Automation Solutions Partner.
Automated Systems AutomatedSystems. Your Global Automation Solutions Partner. Is YourSingle-Source ForTotal Automation Solutions. We are, part of Cooper Power Tools, a Division of Cooper Industries, which
More information88 Series Screwdrivers
Parts Manual 8308 0/07/0 88 Series Screwdrivers For additional product information visit our website at http://www.apextoolgroup.com Safety Recommendations For your safety and the safety of others, read
More informationAiretool. CC-325-HP High Pressure Water Flush Condenser Tube Cleaner. Operating & Service Manual IM 05/11/2011
Operating & Service Manual 90093-IM 05/11/2011 Airetool CC-325-HP High Pressure Water Flush Condenser Tube Cleaner For additional product information visit our website at http://www.apextoolgroup.com Safety
More informationParts Manual PL /21/ Series Right Angle Grinders, Sanders & Drills
Parts Manual 45-8008 PL30-1012 04/21/2011 10-12 Series Right Angle Grinders, Sanders & Drills Throttle Type Free Speed (RPM) Grinders/Sanders Drills Terminations Grinders/Sanders Drills (Chuck) 12,000
More information400QGDBV Series S400 & S600 In-line Positive Feed Drills
Parts Manual 8 06/0/0 400QGDBV Series S400 & S600 Inline Positive Feed Drills For additional product information visit our website at http://www.apextoolgroup.com Safety Recommendations For your safety
More informationCordless Solutions for Critical Fastening
Cordless Solutions for Critical Fastening Up To 16* LiveWire Tools. 1 Line Controller. * Contact Regional Application Center for requirements greater than 10. WLAN Technical Data/Options: Save Up to 50%
More informationCordless Solutions for Critical Fastening
Cordless Solutions for Critical Fastening Up To 16* LiveWire Tools. 1 Line Controller. * Contact Regional Application Center for requirements greater than 10. WLAN Technical Data/Options: Save Up to 50%
More informationParts Manual PL /25/ Series Inline Grinders
Parts Manual 45-8015 PL30-1025-1 04/25/2011 10-25 Series Inline Grinders Throttle Type Free Speed (RPM) Terminations 23,000 18,000 200 Collet 300 Collet Cone & Plug Type 1 Button 10B2580 10B2582-01 -36-77
More informationPeck Feed Drills ADVANCED DRILLING EQUIPMENT 3-1 SP EN M
Peck Feed Drills ADVANCED DRILLING EQUIPMENT SP-1300-3-EN-0806-.25M 3-1 Introduction Peck Feed Drills Our peck feed drills are a unique category unto themselves. These drills drill a short distance, then
More informationModel Number Part Number (Order) Description. PATP Ram PATP-9400-P Hydraulic Pump PATP-HT Hose Tube Assembly
Operating & Service Manual 90113-IM 05/11/2011 Airetool PATP Series Pneumatic/Hydraulic Tube Puller Model Number Part Number (Order) Description PATP-9000 5524902 Ram PATP-9400-P 2999307 Hydraulic Pump
More informationI-Wrench for Production
I-Wrench for Production mart and Flexible. LiveWire I-Wrench Wireless. Flexible. User-Friendly. Your productivity, your freedom. ur leco LiveWire I-Wrench is a true all around production tool to meet your
More information61MF-910 Series Non-Reversible Rotary Vane Power Motors
Parts Manual PL71-61MF-911 04/08/2011 61MF-910 Series Non-Reversible Rotary Vane Power Motors For additional product information visit our website at http://www.apextoolgroup.com Cleco MOTOR UNITS 3/4"
More informationParts Manual PL /25/ Series Inline Extended Grinders
Parts Manual 45-8006 PL30-1011 04/25/2011 10-11 Series Inline Extended Grinders Throttle Type Free Speed (RPM) 3" Extension 5" Extension 28,000 25,000 28,000 25,000 Termination 300 Collet Button 10B1100
More informationIndustrial Power Tools
Industrial Power Tools Index Table of Contents Page Page Page Page 14502.................. 36 22034... 11,22,23,24,25,26,27 51653.................. 35 51654.................. 35 544283PT... 9 613301.................
More informationSTAUFF STAUFF. Local solutions for individual customers worldwide. Medium Pressure Filters SMPF FILTRATION TECHNOLOGY
STAUFF THIS IS STAUFF RESPONSE AND FLEXIBILITY COMPETENT SERVICE PROMPT DELIVERY ENSURED QUALITY FRIENDLY SERVICE PROVEN IN PRACTICE Australia Stauff Corporation (Pty.) Ltd. P.O.Box 227, 24-26 Doyle Avenue,
More informationVICTAULIC Shouldered Solutions
VICTAULIC Shouldered Solutions With a full range of couplings, fittings and valves, Victaulic offers a complete system of products that install safer, easier and up to 10 times faster than alternative
More informationContent 1. Laserline series 3
FT LASERLINE Series TECHNICAL DATA SHEET FT LASERLINE Series 1. Laserline series Content 1. Laserline series 3 2. Connectors 4 3. Control system 4 4. Options 5 4.1 Automatic flow control 5 4.2 FT communication
More informationParts Manual. cascade
c Parts Manual Model Serial Number Revolving Drum Clamp D-DFR-AR0 corporation To Order Parts call: 888--, Fax: 888-9-0 OR Write: Cascade Corporation, P.O. Box 08, Portland, OR 90 Internet: www.cascorp.com
More informationParts Manual. cascade
c Parts Manual Model Catalog Number Paper Roll Clamp H-RCP-B005 R0 corporation For Technical Assistance call: 800-7-, Fax: 888-9-807 To Order Parts call: 888-7-, Fax: 888-9-0 OR Write: Cascade Corporation,
More informationSTAUFF STAUFF. Local solutions for individual customers worldwide. Return Line Filters RTF FILTRATION TECHNOLOGY. Ordering Code # :SFT A - UK
STAUFF THIS IS STAUFF RESPONSE AND FLEXIBILITY COMPETENT SERVICE PROMPT DELIVERY ENSURED QUALITY FRIENDLY SERVICE PROVEN IN PRACTICE Australia Stauff Corporation (Pty.) Ltd. P.O.Box 227, Unanderra Wollongong,
More informationProfessional reconditioning of Machine Tool spindles
Professional reconditioning of Machine Tool spindles SKF Spindle Service Applications Any kind of spindle Machining Centres As world leader of rolling bearings, SKF is operating more than Milling 5000
More information4CKNYC[A2 A2 AKPFGZ GRU AXLE RAIL / 02
P641G RAILWAY INDEX Mitsubishi Materials is constantly engaging ultra modern technologies in the research and development of cutting tools. Results of the research provide solutions for the ever increasing
More information14CN Series Rivet Shaver
Parts Manual 45-8453 04/21/2011 14CN Series Rivet Shaver For additional product information visit our website at http://www.apextoolgroup.com Cleco Nomenclature 45-8453 A 14 C N L 60-95 Tool Classification
More informationINSTALLATION GUIDE. Safe Parking. Innovative Vehicle Solutions
INSTALLATION GUIDE Safe Parking Innovative Vehicle Solutions TEM Safe Parking Installation Table of contents Use 3 Method of Operation 3 Fitting guidelines 4 Maintenance 4 Technical data 5 Versions 5 Check
More informationParts Manual. cascade
c Parts Manual Model Serial Number 90F Roll Clamp 90F-RCP-2 corporation OR Write: Cascade Corporation, P.O. Box 208, Portland, OR 9220 Internet: www.cascorp.com All dealerships with an open account, please
More informationParts Manual. cascade. corporation. Model. Paper Roll Clamp 10H-RCP-A010. Catalog Number
c Parts Manual Model Catalog Number Paper Roll Clamp 10H-RCP-A010 corporation OR Write: Cascade Corporation, P.O. Box 20187, Portland, OR 97220 Internet: www.cascorp.com 3 Decals 1 2 7 5 RC5371.eps 1 7
More informationParts Manual. cascade
c Parts Manual Model Sideshifter Serial Number 60E-SSS-359 corporation For Technical Assistance call: 800-227-2233, Fax: 888-329-8207 OR Write: Cascade Corporation, P.O. Box 20187, Portland, OR 97220 Internet:
More informationSelector Valve RV 713
Selector Valve RV 713 Key valve features RV 713 is a 3 way selector valve designed for flows up to 42gpm (160 Lpm) and max. operating pressures up to 3,625 psi (250 bar). Spools, both 2 and 3 position,
More informationParts Manual. cascade
c Parts Manual Model Serial Number F-Series Sideshifter -SSS-A147R0 cascade corporation For Technical Assistance call: 800-227-2233, Fax: 888-329-8207 To Order Parts call: 888-227-2233, Fax: 888-329-0234
More informationOPERATING INSTRUCTIONS AND SERVICE MANUAL
OPERATING INSTRUCTIONS AND SERVICE MANUAL 55NAL--270-4 55NL--724-4 55RNL-2-LS-4- COMPLETE TOOL MODEL NO. CODE NO. 55NAL--270-4 20270 55NL--724-4 220724 READ SAFETY RECOMMENDATIONS 55RNL-2-LS-4-24089 BEFORE
More informationParts Manual. cascade
c Parts Manual Model Serial Number Revolving Fork Clamp 70D-CFR-CR0 corporation For Technical Assistance call: 800-7-33, Fax: 888-39-807 To Order Parts call: 888-7-33, Fax: 888-39-03 OR Write: Cascade
More informationMonoblock Directional Control Valve RM 230
Monoblock Directional Control Valve RM 230 Key valve features RM 230 light is a monoblock valve, designed for max. operating pressures up to 3,000 psi (210 bar) and typ. pump flows up to 20 gpm (70 Lpm).
More informationParts Manual. cascade
c Parts Manual Model Serial Number 0F Roll Clamp 0F-RCS-2 corporation For Technical Assistance call: 800-227-22, Fax: 888-29-8207 OR Write: Cascade Corporation, P.O. Box 2087, Portland, OR 97220 Internet:
More informationFrekote Adjustable Spray Applicator 6 Extension Extension Extension EQUIPMENT Operation Manual
Frekote Adjustable Spray Applicator 6 Extension 98183 12 Extension 98184 24 Extension 98185 EQUIPMENT Operation Manual 1 Please Observe The Following 1.1 Emphasized Sections Warning! Refers to safety regulations
More informationCONTENTS. General information Ordering example: Guide pillar Guide bush Ball bearing cage Strokes 32.
CONTENTS Pages General information.02 Ordering example:.04 Guide pillar.05 Guide bush.06 CA EB BA HB JB NB GB Ball bearing cage.07 PA Strokes.08 Clamp positions.09 Demountable pillar.10 EPO Middle pillar.11
More informationPARTS LIST FOR NO. 3 SERIES PISTOL AND T HANDLE SCREWDRIVERS
PARTS LIST FOR NO. 3 SERIES PISTOL AND T HANDLE SCREWDRIVERS NON-REVERSING HANDLE ASSEMBLY (SERIAL NO S. STARTING WITH B & D ) Fig. Part Form A278F Date 10-00/B Page 1 of 6 4. 14309 Ring O 5. 14312 Ring
More informationParts and Cross Reference Guide
Parts and Cross Reference Guide L00090 Rev. 7/07 AA1 and S-ABA Brake Adjusters www.haldex.com Table Of Contents Features Haldex ABA (AA1)............................... 1 Haldex S-ABA...................................
More informationPARTS/CROSS-REFERENCE INFORMATION
PARTS/CROSS-REFERENCE INFORMATION AA1 and S-ABA Brake Adjusters Innovative Vehicle Solutions Important Notice The products described within this literature, including without limitation, product features,
More informationIntegral Bonnet Bar Stock Needle Valves
Integral Bonnet Bar Stock Needle Valves SBNV Series Features Integral bonnet design Bar stock body Compact design Low operating torques Variety of End Connections Straight and Angle flow patterns Each
More informationParts Manual. cascade
c Parts Manual Model Serial Number Paper Roll Clamp 0G-RCP-B00R corporation OR Write: Cascade Corporation, P.O. Box 08, Portland, OR 90 Internet: www.cascorp.com 4 Decals C-4-4 RC04.ill C-4-4 SHORT ARM
More informationParts Manual. cascade
c Parts Manual Model Catalog Number Paper Roll Clamp 0H-RBP-B0 corporation For Technical Assistance call: 800-7-, Fax: 888-9-807 To Order Parts call: 888-7-, Fax: 888-9-04 OR Write: Cascade Corporation,
More informationParts Manual. cascade
c Parts Manual Model Serial Number D-RR-24A 892 corporation OR Write: Cascade Corporation, P.O. Box 2087, Portland, OR 97220 Internet: www.cascorp.com Rotator Group 4 2 7 8 RR02.ill $ # @! 9 0 REF QTY
More informationParts Manual. cascade. corporation. Model. Paper Roll Clamp 20H-RTF-A01X-149. Catalog Number
c Parts Manual Model Catalog Number Paper Roll Clamp 0H-RTF-A0X-9 cascade corporation For Technical Assistance call: 800-7-33, Fax: 888-39-807 To Order Parts call: 888-7-33, Fax: 888-39-03 OR Write: Cascade
More informationProduct Parts Information
Product Parts Information Plain, Hand Chain (Geared) and Air Powered Trolleys Models TR2U015 TR2U030 TRU060 TRU120 TRU125 TRU250 (Dwg. MHP2671) Save These Instructions Form MHD56290 Edition 3 June 2006
More informationApplication Engineering Department Special Product. 170D-CFR Fork Clamp - Revolving
Parts Manual For units with serial# 2177229 2226222 Application Engineering Department Special Product 170D-CFR-66999 Fork Clamp - Revolving FEATURES:..Integral mounting includes rollers, chain anchors
More informationParts Manual. cascade
c Parts Manual Model Serial Number Revolving Fork Clamp 5D-CFR-AR0 corporation For Technical Assistance call: 800-7-, Fax: 888-9-807 To Order Parts call: 888-7-, Fax: 888-9-0 OR Write: Cascade Corporation,
More informationParts Manual. cascade
c Parts Manual Model Serial Number E Push Pull E-PPS-A001R1 cascade corporation OR Write: Cascade Corporation, P.O. Box 20187, Portland, OR 7220 Internet: www.cascorp.com Cascade is a Registered Trademark
More informationTAF Series. Innovative self-cleaning high quality plastic filter for a wide variety of applications micron less than 1% of the total flow
TAF Series Innovative self-cleaning high quality plastic filter for a wide variety of applications flowrates filtration degrees water for cleaning minimum operating pressure up to 50 m 3 /h (2 gpm) 500-
More informationAIR-OIL injector BLOCK. Oil Streak Generating, Mixing and PDI systems
AIR-OIL injector BLOCK Oil Streak Generating, Mixing and PDI systems General The Air-Oil Injector Block Assembly is available with one to eight Positive Displacement Injectors(PDI). Each outlet has an
More information