HR2610/ HR2611F/ HR2610T/ HR2611FT Combination Hammers 26mm (1")
|
|
- Juliana Rodgers
- 5 years ago
- Views:
Transcription
1 TECHNICAL INFORMATION Model. Description HR2610/ HR2611F/ HR2610T/ HR2611FT Combination Hammers 26mm (1") CONCEPT AND MAIN APPLICATIONS HR2610 series models are 26mm (1") combination hammers adapted for SDS-PLUS bits, featuring compact and lightweight design, enhanced comfort and better control with ergonomic handle. Model HR2610T/HR2611FT are equipped with quick change drill chuck while Model HR2611/HR2611FT are with AVT; Anti Vibration Technology consisting of Active dynamic vibration absorber with counterweight and Damper spring. AVT ensures operation with extremely low vibration, which is much superior to the competitors. HR2610 series models are available in the variations listed below, including HR2300 and HR2600 series models developed on the same concept. Model Capacity Operation Mode AVT LED Chuck type Dimensions: HR mm 2 modes HR2610 HR2610T HR2600 (Rotation only/ HR2611F HR2611FT Rotation with hammering) HR2601 Length (L) 361 (14-1/4) 385 (15-1/8) 26mm HR2610 Width (W) 77 (3) HR2611F Height (H) 209 (8-1/4) (Rotation only/ HR2310T 23mm Rotation with hammering/ *Round shank bits can also be used by HR2610T 26mm Hammering only) replacing the factory-mounted chuck with HR2611FT and Round shank bits* Quick change drill chuck (keyless). For information of HR2300 and HR2600 series models, see TECHNICAL INFORMATION of each series. Voltage (V) Current (A) Cycle (Hz) Continuous Rating (W) Input Output Max. Output (W) load speed: min ¹= rpm Impacts per minute= min ¹ Chuck type Concrete Vibration absorption Variable speed control Rotation reversing facility Torque limiter LED Job light Double insulation Power supply cord: m (ft) Model TCT bit Core bit Capacities: Diamond core bit Steel Wood Operation mode Weight according to EPTA-Procedure 01/2003*3: kg (lbs) PRODUCT P 1/ 6 HR2610/ HR2611F HR2610T/ HR2611FT 0-1,200 and Round shank bits*1 (Rotation only/ Rotation with hammering/ Hammering only) / (AVT*2) / (AVT*2) (by trigger) / / Europe, rth America:, Australia, Brazil: 2.0 (6.6), Other countries: 2.5 (8.2) 2.8/ / 3.0 (6.1/ 6.4) (6.4/ 6.6) *1 Round shank bits can also be used by replacing the factory-mounted chuck with Quick change drill chuck (keyless). *2 AVT (Anti Vibration Technology); Counterweight mechanism + Damper spring *3 with side grip W L (The image above is HR2610/HR2611F.) H
2 P 2/ 6 Standard equipment Depth gauge... 1 pc Side grip... 1 pc Dust cup set... 1 pc (for some countries only) Quick change drill chuck (keyless)... 1 pc (HR2610T/ HR2611FT only) Carrying case... 1 pc (plastic or aluminum) te: The standard equipment for the tool shown above may vary by country. Optional accessories SDS-PLUS shank TCT hammer drill bits Taper shank TCT hammer drill bits Taper shank adaptor Cotter Core bits Center bits Core bit adaptor Rod Drill chuck ass'y Chuck adapter assembly Drill chuck S13 Chuck key S13 Tool holder set Scraper assembly Waterproof cover Quick change drill chuck (keyless) Dust cups 5 and 9 Hose Joint 25 Dust cup set Plastic carrying case Hammer grease (30g) Bit grease Depth gauge Blow out bulb Safety goggles Bull points Cold chisels Scaling chisels Grooving chisels Hammer service kit
3 Features and benefits [HR2611F, HR2611FT only] Extremely low vibration of m/s² achieved by AVT(Anti-Vibration Technology): Counterweight mechanism dampens the vibration produced by impact mechanism by moving a counterweight in the opposite direction to the movement of the piston. Damper spring absorbs reaction force caused by drill bit at the moment of impact. Compact and Lightweight design Although equipped with AVT: Features an overall length 9mm shorter than HR2470. Weighs as light as HR2470 series models. P 3/ 6 Counterweight mechanism Counterweight When the swash bearing moves the piston back and forth, it simultaneously makes the counterweight swing in the opposite direction to the piston in order to counteract the force produced by the movement of the piston. Damper spring Less bit wobbling compared with HR2470 series models obtained by making bit guide portion 9mm longer than that of the current models Quick change drill chuck (keyless) (HR2610T, HR2611FT only) 40 Different bit-angle settings The bit-angle is adjustable without chisel adapter. High durability * One-touch sliding chuck for easy bit changes Operation mode change lever positioned on the bottom of gear housing for reduced possibility of breakage Redesigned accessories * * * Easy depth adjustment Depth gauge can be adjusted with a single motion. Increased repairability The repairability of clutch cam is drastically increased by simplifying the mechanism of operation mode change. Easy-to-grip handle ergonomically designed to: give maximum power thrust. provide a sure and comfortable grip in any operation; overhead application, drilling with palm-up or palm-down grip. Rubberized soft grip * provides more comfort and control. Single-light LED job light * with afterglow function Torque limiter * (HR2611F, HR2611FT only) illuminates workpiece and drill bit brightly for efficient operation in dark environment. *The same advantages as HR2470 series models Plastic carrying case Easy to transport with large carrying handle Easy to open with large latches Stackable with other plastic carrying cases of the same size or different size Dust cup Higher visibility of the bit tip obtained by transparent cup mouth Large carrying handle Large latches Connectable with the hose of Makita vacuum cleaner without joint parts With Makita vacuum cleaner, this dust cup can efficiently extract dust and debris in a wide range of drilling operations; from overhead to vertical downward applications. Also can be used like the current dust cup by plugging the suction port.
4 Comparison of products Performance Comparison P 4/ 6 te: 1. The test results depend to a great extent on the hardness of materials, etc. 2. Numbers in the chart below are relative values when the capacities of HR2470 are indexed at. (1) Drilling Test conditions: Drilled holes to a depth of 40mm (1-9/16") using ø1.5mm² x 50m cord reel. Test material: Concrete with compressive strength of 40N/mm² Makita HR2610 series Makita HR2470 series BOSCH GBH2-26DRE HITACHI DH24PC3 [Work speed] [diameter: ø6.5mm (1/4")] [Work speed] [diameter: ø10.5mm (5/16")] Makita HR2610 series Makita HR2470 series BOSCH GBH2-26DRE HITACHI DH24PC3 [diameter: ø12.5mm( 1/2")] [diameter: ø16.5mm (5/8")] (2) Chipping Test conditions: Chipped concrete with compressive strength of 40N/mm², and measured the amount of concrete removed. small [Work speed] Large Makita HR2610 series Makita HR2470 series BOSCH GBH2-26DRE
5 Comparison of products P 5/ 6 Comparison Continuous rating input: W Rated amperage for rth America: A load speed: min ¹= rpm Impacts per minute= min ¹ Chuck type TCT bit Core bit Diamond core bit HR2610/ HR2611F Impact energy (EPTA): J *2 Impact energy*1: J Operation mode: R= Rotation only R+H= Rotation with Hammering H= Hammering only Vibration absorption / (AVT*3) Vibration: m/s² / 12.0 ise: db(a) 91/ Rotation reversing facility Variable speed control LED Job light Power supply cord: m (ft) Weight according to EPTA- Procedure 01/2003*5: kg(lbs) Concrete Steel Wood Dimensions: Length Width Height Model 0-1,200 / 361 (14-1/4) 77 (3) 209 (8-1/4) *4 2.8/ 2.9 (6.1/ 6.4) Makita BOSCH HITACHI HR2470/ HR2470F HR2450(F)/ HR2451/ HR2452 GBH2-26DRE/ GBH2-26DE DH24PC3 370 (14-1/2) 84 (3-1/4) 214 (8-3/8) / / / / (F-model only)/ / 360 (14-1/8) 204 (8) 2.7 (6.0) *1 Measured according to our conventional reference, *2 Actually measured value, *3 AVT (Anti Vibration Technology); Counterweight mechanism + Damper spring *4 Europe, rth America:, Australia, Brazil: 2.0 (6.6), Other countries: 2.5 (8.2), *5 with side grip 0-1,150 Capacities: 0-1, 0-4,500 / 2.9 (6.4) 0-1,/ 0-1,/ 1, 0-4,500/ 0-4,500/ 4, N/A 30 (1-3/16) , (18.5*2) 91 (92*2) / 380 (15) 84 (3-5/16) 210 (8-1/4) 2.9 (6.4) 50 (2) 12.7 (20.0*2) 92 (91*2) 351 (13-3/4) 73 (2-7/8) 198 (7-3/4) 5.0 (16.4) 2.8 (6.2)
6 Comparison of products P 6/ 6 Comparison Continuous rating input: W Rated amperage for rth America: A load speed: min ¹= rpm Impacts per minute= min ¹ Chuck type Impact energy (EPTA): J 2.4 Operation mode: R= Rotation only R+H= Rotation with Hammering Vibration: m/s² ise: db(a) TCT bit Rotation reversing facility Variable speed control LED Job light Power supply cord: m (ft) Weight according to EPTA- Procedure 01/2003*7: kg(lbs) HR2610T/ HR2611FT Concrete Steel Wood Core bit Diamond core bit 0-1,200 H= Hammering only Quick change drill chuck Vibration absorption / (AVT*3) Dimensions: Model and Round shank bits*1 15.0/ / / / / Length 385 (15-1/8) 394 (15-1/2) 384 (15-1/8) Length*5 421 (16-1/2) Width 77 (3) 84 (3-1/4) Height 209 (8-1/4) 214 (8-3/8) 204 (8) *6 2.9/ 3.0 (6.4/ 6.6) Makita BOSCH HITACHI HILTI HR2470T/ HR2470FT HR2450T/ HR2450FT GBH2-26DFR DH24PM TE2-M 650 N/A 22 (7/8) 50 (2) 30 (1-3/16) 20 (13/16) 0-1, 0-1, , ,200/ 0-2, , , ,000 Capacities: () (6.5) and Round shank bits*1 2.5* (16) 84 (3-5/16) 210 (8-1/4) 3.0 () Impact energy*2: J (15-1/8) 5.0 (16.4) 2 modes (R/ R+H) 10.0 (14.0*4) 89 (88*4) 352 (13-7/8) 422 (16-5/8) 431 (17) 433 (17) N/A N/A 73 (2-7/8) 198 (7-3/4) 89 (3-1/2) 203 (8) 3.0 (6.5) *1 Round shank bits can also be used by replacing the factory-mounted chuck with Quick change drill chuck (keyless), *2 Measured according to our conventional reference, *3 AVT (Anti Vibration Technology); Counterweight mechanism + Damper spring, *4 Actually measured value, *5 with Quick change drill chuck, *6 Europe, rth America:, Australia, Brazil: 2.0 (6.6), Other countries: 2.5 (8.2), *7 with side grip
TECHNICAL INFORMATION
TECHNICAL INFORMATION Model No. Description CONCEPT AND MAIN APPLICATIONS Specification HR2800, HR2810, HR2811F HR2810T, HR2811FT Rotary Hammers 28mm (1-1/8") HR2800 series models have been developed as
More information26mm SDS Plus Rotary Hammer
26mm SDS Plus Rotary Hammer Product Objectives Develop a high class product equipped with built in dust extraction vibration absorbing housing and high power output Designed to suit the needs of builders
More information18mm SDS Plus Rotary Hammer
18mm SDS Plus Rotary Hammer Product Objectives Designed to suit the needs of demolition crews, concreters, builders, electricians plumbers and any looking to undertake masonry drilling Develop 2 new high
More informationTECHNICAL INFORMATION
TECHNICAL INFORMATION PRODUCT P 1 / 15 Model No. Description HR2455 Rotary Hammer 24mm (15/16") L W CONCEPT AND MAIN APPLICATIONS Model HR2455 has been developed as a sister tool to Model HR2450, the Makita
More informationTECHNICAL INFORMATION
TECHNICAL INFORMATION Model No. Description HR3200C, HR3210C, HR3210FCT Rotary Hammer 32mm (1-1/4") CONCEPT AND MAIN APPLICATIONS HR3200C series models have been developed as successor models of HR3000C,
More informationTECHNICAL INFORMATION
TECHNICAL INFORMATION Models No. Description BHR202 Cordless Combination Hammer CONCEPT AND MAIN APPLICATIONS The subject model features 18V Li-ion Battery and 3 mode selection for ensuring an operator
More informationRotary Hammers and Demolition Hammers
50 Professional Blue Power Tools for Trade & Industry Professional Blue Power Tools for Trade & Industry 51 Immense power for the toughest jobs. With the rotary hammers from 2 11 kg and the demolition
More informationHitachi Rotary Hammer
LIST No. F408 Dec. 2009 PRODUCT NAME Hitachi Rotary Hammer Model DH 28PC MARKETING OBJECTIVE This product features a maximum bit diameter of 28 mm, the capability to drill holes in concrete and other hard
More informationELECTRIC TOOL PARTS LIST
Hitachi Power Tools LIST E493 ELECTRIC TOOL PARTS LIST ROTARY HAMMER Model 2006 7 3 (E1) 1 2 3 4 501 502 48 11 12 13 14 15 24 25 26 30 31 32 25 5 6 16 17 18 19 27 28 33 34 35 7 8 20 29 21 9 22 10 23 36
More informationPrices Valid While Quantities Last
MODEL DESCRIPTION PRICE 831325-9 Small LXT Tool Bag $ 20.00 821010-X 14" Tool Bag $ 23.00 821007X 21" Tool Bag $ 28.00 831278-2 Large LXT Tool Bag $ 48.00 831269-3 LXT Tool Bag With Wheels $ 60.00 1 P
More informationGWS 850 C Professional Angle Grinder
Bosch Power Tools tions 2018 GWS 80 C Professional Angle Grinder The lightweight tool with high performance Order the GWS 80 C (1/230 V) to receive special pricing. Powerful 80 watts with Constant Electronics
More informationTECHNICAL INFORMATION Model No. Description
TECHNICAL INFORMATION Model No. Description CONCEPT AND MAIN APPLICATIONS Specification HR2450, HR2451, HR2452 24mm (15/16 " ) Rotary Hammer The above models are the advanced version of MAKITA's famous
More informationHAMMER RANGE. Polígono Indutrial O Rebullón s/n Mos - España -
29 31 HAMMER RANGE HAMMER RANGE HIGH PERFORMANCE POWER WHEN YOU NEED IT MOST AEG POWERTOOLS offer an extensive selection of high performance rotary, combination, chipping and demolition hammers. HAMMER
More informationSPECIFICATIONS Power input (W) No load speed (rpm) Hammer rate (under load) Drilling concrete / steel / wood 24 / 13 / 30 mm
BH 24 IE 24 MM SDS-Plus Rotary Hammer Powerful 800 watt motor 24 mm drilling capacity in concrete Safety clutch for user protection Variable speed electronics for control Hammer action stop for drilling
More informationELECTRIC TOOL PARTS LIST
Hitachi Power Tools LIST E494 ELECTRIC TOOL PARTS LIST ROTARY HAMMER Model 2006 8 3 (E1) 1 56 2 3 4 5 90 124 11 12 23 34 13 14 15 24 25 26 27 35 36 6 7 16 17 28 29 30 8 9 10 18 19 20 21 31 32 33 50 51
More informationDH 30PC DH 30PB POWER TOOLS HAMMER DRILL DH 30PC/DH 30PB TECHNICAL DATA AND SERVICE MANUAL MODELS
MODELS DH 30PC DH 30PB POWER TOOLS D HAMMER DRILL DH 30PC/DH 30PB TECHNICAL DATA AND SERVICE MANUAL LIST No. DH 30PC: E466 DH 30PB: E465 May 2002 SPECIFICATIONS AND PARTS ARE SUBJECT TO CHANGE FOR IMPROVEMENT
More informationMODEL DH 40MR POWER TOOLS TECHNICAL DATA AND SERVICE MANUAL ROTARY HAMMER DH 40MR SPECIFICATIONS AND PARTS ARE SUBJECT TO CHANGE FOR IMPROVEMENT
MODEL DH 40MR POWER TOOLS D ROTARY HAMMER DH 40MR TECHNICAL DATA AND SERVICE MANUAL LIST No. E467 Sep. 2002 SPECIFICATIONS AND PARTS ARE SUBJECT TO CHANGE FOR IMPROVEMENT REMARK: Throughout this TECHNICAL
More informationNote. Icons. Double Insulation. Variable Speed. Brake. Reversing. . New aesthetic design. Charger: . New aesthetic design. . Charging time: 60min
TOOL CATALOGUE 1 Index Cordless Driver Drill 1 MT070 1 MT90 3 Cordless Percussion Driver Drill 1 MT071 1 MT903 3 Cordless Impact Driver MT080 1 MT93 Drill MT081 1 MT9 Percussion Drill 3 MT191 5 MT961 3
More informationHAMMERS NEW. 26mm 3 Mode SDS-Plus Hammer NEW NEW. 28mm 3 mode hammer with QCC. 26mm 3 Mode D Handle Hammer NEW NEW
22mm 2 Mode Hammer D25032K*/ D25033K/D25033C 4 to 22 mm in diameter Large hammer mechanism delivers high performance with low stress to the critical components resulting in better durability Electronic
More informationTECHNICAL INFORMATION
TECHNICAL INFORMATION Model No. Description CONCEPT AND MAIN APPLICATIONS Specification GA4030, GA4530, GA5030 Angle Grinders 100mm (4"), 115mm (4-1/2"), 125mm (5") GA4030/ GA4530/ GA5030 are small diameter
More informationTECHNICAL INFORMATION
TECHNICAL INFORMATION Model No. Description BHP452 Cordless Percussion Driver Drill 13mm (1/2") L PRODUCT P 1/ 8 CONCEPT AND MAIN APPLICATIONS Model BHP452 has been developed as a cost-competitive 18V
More informationWH18DBDL2/JX 207Nm 18V Brushless Impact Driver WR18DBDL2/JX 18V Brushless Impact Wrench 305Nm
WH18DBDL2/JX 18V Brushless Impact Driver 2 x 6.0Ah Li-Ion Triple hammer mechanism 207Nm hard torque 4 mode speed selection 38 minute charger with USB output Includes stackable case Driver bit not included
More information18V LXT Lithium-Ion Brushless Cordless 2-Pc. Combo Kit Model: LXT239
Close 18V LXT Lithium-Ion Brushless Cordless 2-Pc. Combo Kit Model: LXT239 Efficient BL Brushless motor is electronically controlled to optimize battery energy use for up to 50% longer run time per charge
More informationProfi Silver Line Range 2005 Only direct import. Created :58 Revised :40 Page 1
Profi Silver Line Range 2005 Only direct import. Created 10.02.2005 14:58 Revised 25.05.2005 11:40 Page 1 INDEX Article Group Page Angle Grinders 3 Cordless Screwdriver 4 Laser Jig Saw 5 Laser Circular
More information10.5 gal. Vertical Oil Lubricated Air Compressor
10.5 gal. Vertical Oil Lubricated Air Compressor Model No. AC1104 Tank volume: 10.5 gal. (40 L) Direct drive Oil-lubricated single cylinder pump for durability and long life triple the pump life of comparable
More informationCONCRETE AND MASONRY SYSTEMS MADE IN GERMANY
CONCRETE AND MAONRY YTEM MADE IN GERMANY ATED R G E T ED IN C N A TEM DV A Y T MO LE DUT CONCRETE AND MAONRY DUTLE TOOL YTEM ARE YOU OHA READY? Effective June 23, 2016 OHA requires all and any indoor and
More informationCORDLESS POWER TOOLS. Drill Cordless 18V LI-ON DHP456ZK. Drill Kit Cordless 18V LI-ION DHP456RFE. Drill Cordless 18V BHR202ZK
Drill Cordless 18V LI-ON DHP456ZK Battery Capacity: 4Ah Battery Charge Time: 22min Battery Type Li-ion Chuck Size: 13mm Chuck Type : Keyless Drilling Capacity Metal:13 mm Drilling Capacity Wood: 38 mm
More informationD Kg Compact Hammer
D25304 2Kg Compact Hammer TYPE 1 Introduction Exploded Drawing Bill Of Material Repair Instructions New Parts E13527 E13528 D25304---A R11388 105 Wiring Diagram Marketing Information Main Menu E13582 E13583
More informationBosch Home Exclusive Line
Bosch Home Exclusive Line Make it your home with the Bosch Home Exclusive Line. With Bosch s DIY power tools you always have the right tool at hand for your projects at home. Make it your home. All DIYers
More informationAIR DRILL, AIR ANGLE GRINDER and AIR DIE GRINDER
AIR DRILL, AIR ANGLE GRINDER and AIR DIE GRINDER AIR DRILL KW0800256 3/8 Chuck, Reverse Equipped with precision chucks for excellent accuracy Precision bearing provides longer tool durability KW0800258
More informationCordless Rotary Hammer
ENGLISH (Original instructions) INSTRUCTION MANUAL Cordless Rotary Hammer BHR00 00309 IMPORTANT: Read Before Using. ENGLISH (Original instructions) SPECIFICATIONS Model BHR00 Concrete 0 mm Capacities Steel
More informationTECHNICAL INFORMATION
TECHNICAL INFORMATION Models No. Description MT361 Router L PRODUCT P 1/ 7 CONCEPT AND MAIN APPLICATIONS H Model MT361 is a maktec W class Router developed based on the current Makita brand model RP0.
More informationCordless Tools Lithium-ion Technology
22 Professional Blue Power Tools for Trade & Industry Cordless Tools Lithium-ion Technology 00% drill/driver at half the size Only half the size of a 2-volt standard cordless drill/driver Professional
More information.401 SHANK AIR HAMMERS
AIR HAMMERS 507 AIR TOOLS AIR HAMMERS.401 SHANK AIR HAMMERS.401 Shank Medium Barrel Air Hammer 404123 / AH150M Medium barrel delivers steady powerful blows Accepts popular.401 taper shank chisels Standard
More informationTECHNICAL INFORMATION
TECHNICAL INFORMATION Model No. Description DP4010, DP4011 2-Speed Drill 13mm (1/2") L PRODUCT P 1/ 8 CONCEPT AND MAIN APPLICATIONS Models DP4010 and DP4011 have been developed as 13mm (1/2") Drill for
More informationDH18DBL. Impact Wrench WR18DSDL. Impact Wrench WR18DBDL. 125mm Circular Saw C18DBL. Reciprocating Saw CR18DSL. Premium Site Bag
Cordless Rotary Hammers The Hitachi Cordless Solution 18V 6.0Ah Get A Set! Get Naked! All Hitachi cordless sets come standard with two batteries, charger and a carry case. This provides you with what you
More informationCOMING IN 2006 MOVE TO A HIGHER POWER CORDLESS TOOL SYSTEM COMMENTS FROM FIELD TESTERS
COMING IN 06 V28 Rotary Hammer TM CORDLESS TOOL SYSTEM V28 Right Angle Drill V28 Job Site Radio COMMENTS FROM FIELD TESTERS This band saw is an awesome tool. They don t have any power on the job when I
More informationDH18DSL(HX) Ì4ÇÄ_l0[:"Î. 18V Slide Rotary Hammer Specifications. Also Available Naked DH18DSL(H4)
DH18DSL(HX) 18V Slide Rotary Hammer 03387921 DH18DSL(H4) 01857564 Ì4ÇÄ_l0[:"Î 4 9 6 6 3 7 6 1 6 5 9 2 6 Impact rate SDS plus 999100 Masonry 16mm 18mm 0 750 / 0 1,500 (min-1) 0 3,100 / 0 6,200 (min-1) SDS
More informationDW005K 24V Rotary Hammer
DW005K 24V Rotary Hammer TYPE 1 Introduction Exploded Drawing Bill Of Material Repair Instructions E13120 R11222 New Parts 9 Marketing Information Main Menu August 2001 M Cook Introduction 24 Volt heavy
More informationHow to select your fastening screwdrivers?
Fastening Pistol shape for horizontal applications or for better controllability Straight shape for vertical applications How to select your fastening screwdrivers? Clutch Type IMPACT (rocking dog) Good
More informationCordless Systems. Cordless Systems. Hilti. Outperform. Outlast. Cordless. Systems
Hilti. Outperform. Outlast. 49 Introduction Introduction Page 51-52 Drill drivers compact drill driver SFC 22-A Page 53 hammer drill driver SFH 22-A Page 54 Accessories for drill drivers Page 57 Impact
More informationErgonomic design for comfort. Reduced vibration. Twin hammer impact mechanism. Part No. Maximum Torque Free Speed Weight Ave Air Consumption
3/8 Impact wrench The smallest in PCL s range of Prestige Impact Wrenches. The 3/8 Impact Wrench is designed for professional heavy duty use, with an ergonomically designed soft grip handle and a lightweight
More informationCordless Systems. Cordless Systems. Hilti. Outperform. Outlast.
Cordless Systems Hilti. Outperform. Outlast. 52 Introduction Introduction Page 54-55 Drill drivers Cordless compact drill driver SFC 22-A Page 56 Cordless hammer drill driver SFH 22-A Page 57 Accessories
More informationHAMMER DRILL BITS PROFESSIONAL WORK MEANS ECONOMICAL WORK HAMMER DRILL BITS. From Pros for Pros 9
PROFESSIONAL WORK MEANS ECONOMICAL WORK 251 SDS-plus MS5 TURBOHEAD Xpro 12 15 252 SDS-plus W2 TURBOKEIL X-Form 16 253 SDS-plus MS5 TURBOKEIL 17 20 255 SDS-plus MS5 VARIO 21 256 SDS-plus hammer drill bit
More informationTABLE OF CONTENTS. 1. Preface P: 2 P: Vectors. 3. Summary Table P: 4-5
TABLE OF CONTENTS. Preface 2. Vectors 3. Summary Table 4. METAL a. HSS-G Drill Bits b. HSS-Co Drill Bits c. Bimetal Hole Saws d. TCT Hole Saws P: 2 P: 3 P: 4-5 P: 8 P: 9 P: 0- P: 2 5. CONCRETE a. Multi-Purpose
More informationSIOUX TOOLS FORCE PRODUCT CATALOG DRILLS
SIOUX TOOLS FORCE PRODUCT CATALOG DRILLS Drills Index Pistol Grip................................... 9 Inline................................... 9-10 Right Angle................................ 10 Drill
More informationDIY (Personal Use Only)
1 DRILL ELECTRIC DRILL and IMPACT DRILL Standard Accessories KW0700026: 1pc Impact Drill 5pcs Masonry Drills 9pcs Twist Drills KW0700026 KW0701000 KW0701002 KW0701001 5pcs Grinding Stones 1pc Case KW0700026
More informationaeg POwErTOOLs POwEriNg PrOFEssiONaLs since 1898
aeg POwErTOOLs POwEriNg PrOFEssiONaLs since 1898 aeg POwErTOOLs promises to draw upon its heritage and deliver exciting, high performance, innovative working solutions for the professional tradesmen of
More informationAir Finishing Tools CP778. Heavy Duty Hi-Speed Sander
Air Finishing Tools Finishing work provides a wide range of challenges and we have a complete line of sanders, buffers and polishers for every application from heavy material removal to fine finishing.
More informationMore Power. More Brushless. More Advanced.
HUGE POWER UP 18V PROMO MAY-JULY 2017 HOT DEALS AND BONUSES More Power. More Brushless. More Advanced. INDUSTRY S QUICKEST CHARGER 0-6.0Ah in 38 minutes Rapid Smart Charger UC18YSL3 Features and Benefits
More informationBosch Blue Power. The ultimate system for stainless steel: perfect handling for a perfect finish R A8 000 R
Bosch Blue Power Promotion valid from 01/09/2013 to 31/12/2013 The ultimate system for stainless steel: perfect handling for a perfect finish NEW! Professional Powerfile NEW! Pipe Belt Sander GEF 7 E Professional
More informationThe Right Tool for Your Tough Job
The Right Tool for Your Tough Job Applications Tool Sullair Model Class Weight cfm Horizontal and overhead applications Chipping Hammer MCH-2/3/4 15# 16-19 lbs 26-33 Industrial applications MCH-3S/4S Cutting
More informationFast Clip & Traklok Jaw Options (Quick Change Jaws)
Fast Clip & Traklok Jaw Options (Quick Change Jaws) Fastclip Clip up Jaws (standard on machine) Part No.: 1640146 28kg to 68kg/m Rail Fastclip Unclip jaw Jaws standard with Fastclip head 47-68 kg/m Rail,
More informationSERVICE PARTS LIST 1-1/8" ROTARY HAMMER MILWAUKEE ELECTRIC TOOL CORPORATION W. LISBON RD., BROOKFIELD, WI Drwg.
00 0 200 204 276 EXAMPLE: Component Parts (Small #) Are Included When Ordering The Assembly (Large #). SERVICE PARTS LIST SPECIFY CATALOG NO. AND SERIAL NO. WHEN ORDERING PARTS PAGE 1 OF 3 BULLETIN NO.
More informationDC 120VA DC 120VA POWER TOOLS DIAMOND CORE DRILL TECHNICAL DATA AND SERVICE MANUAL MODEL
MODEL DC 120VA POWER TOOLS D DIAMOND CORE DRILL DC 120VA TECHNICAL DATA AND SERVICE MANUAL LIST No. 0192 Jun. 2000 SPECIFICATIONS AND PARTS ARE SUBJECT TO CHANGE FOR IMPROVEMENT Notice for use Specifications
More information1.1/2" - Air Impact Wrench (Twin Hammer) 1" - Air Impact Wrench (Twin Hammer) 1" - Air Impact Wrench (Twin Hammer)
Impact Wrenches 13000-2 Anvil Length Bolt Capacity Overall Length Torque (5s) 12000-2 8" 3,700rpm 2,000 ft-lbs 10kg 2" 3,700rpm 2,000 ft-lbs 7.7kg 3/4" - Air Impact Wrench (Single Hammer) 1266 2" 3,700rpm
More information1/4 Cordless Precise Torque Screwdrivers BFT123FZ BFT081FZ BFT040FZ. 3/8 Cordless Precise Torque Angle Wrenches DFL300FZ DFL300FZ
1/4 Precise Torque Screwdrivers DFT022FZ DFT044FZ BFT084FZ DFT126FZ Built in LED to illuminate tight spaces Extremely compact and lightweight for outstanding ergonomics Capacities On board LED and audible
More informationCordless Combination Hammer
ENGLISH (Original instructions) INSTRUCTION MANUAL Cordless Combination Hammer DHR0 00888 IMPORTANT: Read Before Using. ENGLISH (Original instructions) SPECIFICATIONS Model DHR0 Concrete 0 mm Capacities
More informationThe Right Tool for Your Tough Job
SULLAIR air tools The Right Tool for Your Tough Job Applications Tool Sullair Model Class Weight cfm Horizontal and overhead applications Chipping Hammer MCH-2/3/4 15# 16-19 lbs 26-33 Industrial applications
More informationMODEL DS 7DF POWER TOOLS TECHNICAL DATA AND SERVICE MANUAL CORDLESS DRIVER DRILL DS 7DF SPECIFICATIONS AND PARTS ARE SUBJECT TO CHANGE FOR IMPROVEMENT
MODEL POWER TOOLS D CORDLESS DRIVER DRILL TECHNICAL DATA AND SERVICE MANUAL LIST No. F881 Mar. 2003 SPECIFICATIONS AND PARTS ARE SUBJECT TO CHANGE FOR IMPROVEMENT REMARK: Throughout this TECHNICAL DATA
More informationD25102K / CK 2kg Compact Hammer
D25102K / CK 2kg Compact Hammer TYPE 1 Introduction Exploded Drawing Bill Of Material Repair Instructions New Parts Wiring Diagram Main Menu SEPTEMBER 2003 M.CHADWICK D25102K In Line Pistol Grip 2 Mode,
More information10.8V KIT. Bosch Power Tools Product Information. Specifications. Part Number: Barcode:
10.8V KIT Includes: 1x GDR 10.8Li Impact Driver 1X GOP 10.8V-Li Multi-Cutter 1x GSR 10.8-2Li Drill Driver 2x 1.3Ah 10.8V Li-Ion Batteries 1x 30min Charger Specifications GOP 10.8V-LI No-load speed 5.000
More informationMODEL D 10YB POWER TOOLS TECHNICAL DATA AND SERVICE MANUAL ANGLE DRILL D 10YB SPECIFICATIONS AND PARTS ARE SUBJECT TO CHANGE FOR IMPROVEMENT
MODEL D 10YB POWER TOOLS D ANGLE DRILL D 10YB TECHNICAL DATA AND SERVICE MANUAL LIST No. 0193 Jun. 2000 SPECIFICATIONS AND PARTS ARE SUBJECT TO CHANGE FOR IMPROVEMENT Notice for use Specifications and
More informationKey product features. Other product advantages. Comes complete with
Impact Drill AdvancedImpact 900 The new AdvancedImpact 900 with innovative Bosch Kickback Control and 2-speed gearbox for DIYers with the highest demands on power and control Go to product Key product
More information5.2HP GAS CUT OFF SAW 14 GAS CUT OFF SAW CM75EBP NEW TOOLS & TECHNOLOGY FOR TOP-of-CLASS. Powered by 75cc New PureFire Engine *
GAS CUT OFF SAW 14 GAS CUT OFF SAW CM75EBP A Distributor of Hitachi Koki USA NEW TOOLS & TECHNOLOGY FOR 2017 TOP-of-CLASS Max Power Output 5.2HP The diamond wheel shown is non standard & sold only as an
More informationScrewdrivers. Choosing the right Screwdriver. Tool selection
RediPower Choosing the right Screwdriver Tool selection Type of fastener/component Joint integrity Torque required Tool orientation and ergonomics Productivity POSSIBLE USE OF SCREWS TYPE OF CLUTCH START
More informationAIR DRILL, AIR ANGLE GRINDER and AIR DIE GRINDER
AIR DRILL, AIR ANGLE GRINDER and AIR DIE GRINDER AIR DRILL KW0800256 3/8 Chuck, Reverse Equipped with precision chucks for excellent accuracy Precision bearing provides longer tool durability KW0800258
More informationFastener Drive & Screwdriving
www.irwin.com Fastener & Screwdriving tools Manufactured for Strength and value industry-specific Screwdriver Bits Fastener heads are often designed for the particular needs of specific applications and
More informationDurability - Reliability - Profitability
Durability - Reliability - Profitability Solutions for professionals in diamond drilling and sawing, since 1988 1 C14 CONCRETE SAW 355mm handheld wet or dry diamond saw with 2800W motor for up to 125mm
More informationThe Right Tool for Your Tough Job
SULLAIR air tools The Right Tool for Your Tough Job Applications Tool Sullair Model Class Weight cfm Horizontal and overhead applications Chipping Hammer MCH-2/3/4 15# 16-19 lbs 26-33 Industrial applications
More informationD25203K 2 kg Compact Hammer
D25203K 2 kg Compact Hammer TYPE 1 Introduction Exploded Drawing Bill Of Material Repair Instructions New Parts Wiring Diagram Main Menu September 2003 M.Chadwick D25203K In Line D handle, 3 Mode, 2kg
More informationRECA VISO Assortments
Clear plastic lids: Easy viewing of product and stock. Ergonomically designed handle: comfortable to carry and use. Stackable without slipping: the base and the lids fit into one another. RECA VISO Cabinets
More informationBosch Blue Power Tools & Accessories. July December 2014
BluePrint Bosch Blue Power Tools & Accessories July December 2014 5.0Ah Get more power at the same size with the new Bosch 18V 5.0Ah battery THE OFFICIAL POWER TOOL OF TOUGH MUDDER Customer Service you
More informationInjection Logo (Optional) To improve brand and product image. Soft Grip For comfortable use and higher working efficiency
The range covers full range of portable power tools, including Cordless Screwdriver, Cordless Drills, Impact Drills, Impact Wrench, Rotary Hammers, Demolition Hammer, Angle Grinders, Sanders, Jig Saws,
More informationTECHNICAL INFORMATION
TECHNICAL INFORMATION Model No. Description GA5020C/GA6020C, GA5021C/GA6021C Angle Grinders 125mm (5") /150mm (6") L PRODUCT P 1/10 CONCEPT AND MAIN APPLICATIONS These four models have been developed as
More informationDRILLING. 55 years of innovation Hitachi Pneumatics APPLICATION GUIDE FOR PNEUMATICS PNEUMATICS 2015 POWER TOOLS CATALOGUE CORDLESS
APPLICATION GUIDE FOR Application N3804AB3 NT50AE2 NT65M2 NT65MA4 NR90AD NV65AF3 NC65AC Furniture and Upholstry Hand and Hobby Crafts Panelling and Picture Framing Shop Fitting and Cabinet Making Finish
More informationSPECIAL OFFER SPRING Valid to Industrial. People. Passion. Performance. Tools
SPECIAL OFFER SPRING 2014 Valid to 20140630 Industrial Tools People. Passion. Performance. CP8252-R 2300:- 2500:- 13000:- 25000:- 38000:- 1/2 impact wrench Twin hammer clutch Composite body and aluminum
More informationTECHNICAL INFORMATION
TECHNICAL INFORMATION Model No. Description SP6000 Plunge Cut Circular Saw 165mm (6-1/2") CONCEPT AND MAIN APPLICATIONS Model SP6000 is the first Makita plunge cut saw. Features great conveniences such
More informationCordless rotary hammer drill 18,0 V CHE 18.0-EC
Bahnhofstraße 5 77 Steinheim Phone +49 744 828-0 Fax +49 744 25899 Cordless rotary hammer drill 8,0 V CHE 8.0-EC Order number 430.005 Battery voltage 8 V Battery capacity 2,5 / 5,0 Ah No load speed 0-400
More information7254P. Aver. Air Consumption (cfm) Air Pressure (psi)
Screwdrivers 1/4 Direct Drive Screwdrivers Composite Housing Screwdrivers Quick change bit holder. Top mount reverse valve - Easy to switch direction - One hand. Low Noise 72-76 dba Powerful 7 Vane Motor
More informationBreaker TE 500. Technical data. Advantages. Drilling and Demolition. Rated power. Single impact energy. Full hammering frequency
Breaker TE 500 Chiseling work on concrete and masonry walls Channeling on concrete and masonry Repairing concrete Removing plaster and tiles Chiseling breaches and penetrations for pipes in walls and floors
More informationPOWER TOOLS 2017 / 18. The Power in your hands.
POWER TOOLS 2017 / 18 The Power in your hands www.sparky.eu SPARKY GROUP Our company Professionalism & Excellence With over 50 years of manufacturing experience, their own 40 acre European manufacturing
More informationTHE NEW 900/950. The best just got better
THE NEW 900/950 The best just got better 27 Joule low Energy Lowest Vibration Level Highest in Class! 27 Joule blow energy for unsurpassed drilling and breaking performance a combination result from the
More informationSAFETY AND OPERATING MANUAL. Cordless rotary hammer WX382 WX382.1 WX382.2 WX382.3 WX382.4
SAFETY AND OPERATING MANUAL Original instructions 2 General Power Tool Safety Warnings WARNING: Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result
More information2019 EUROPE CATALOG since
2019 EUROPE CATALOG since 1989 1 C14 CONCRETE SAW 355mm handheld wet or dry diamond saw with 2800W motor for up to 125mm depth of cut. Ideal for in-door cutting. Magnesium blade guard provides maximum
More informationONSITE OFFERS FREE CAP WITH BOTTLE OPENER! APRIL JUNE PROMOTIONS NEW PRODUCTS WITH EVERY ITEM PURCHASED OVER $99
FREE CAP WITH BOTTLE OPENER! WITH EVERY ITEM PURCHASED OVER 99 ONSITE OFFERS APRIL JUNE 2013 PROMOTIONS NEW PRODUCTS 3 1 30 *CONDITIONS APPLY YEAR LIMITED WARRANTY* YEAR FREE SERVICE CONTRACT DAY NO RISK
More informationPneumatic tools and accessories. For trades and businesses.
Competence from passion. Pneumatic tools and accessories. For trades and businesses. Pneumatic tools Lightweight, stable construction and proven durability: effective tools for maximum productivity. Impact
More information24V CORDLESS HAMMER DRILL
24V CORDLESS HAMMER DRILL CDI224MN ORIGINAL INSTRUCTIONS GENERAL POWER TOOL SAFETY WARNINGS WARNING: Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result
More informationFeatures and Specifications for Impact Wrenches
Pneumatic Air Tools Version 2017 Revised 06/2017 Email your order to: sales@polyconn.com or fax to (763) 398-2590. www.polyconn.com. Questions call: (763)559-0388 3062 Ranchview Lane North. Plymouth, MN
More informationPower Equipment
Power Equipment - 445 - Power Equipment T80900 1100w 19m Weldon Shank Auto-Reverse Tapping & Core Drill Machine Fully Mechanical tapping with automatic reversing controlled by crank motion Two-mode gear-box:
More informationDRIVE AXLE Volvo 960 DESCRIPTION & OPERATION AXLE IDENTIFICATION DRIVE AXLES Volvo Differentials & Axle Shafts
DRIVE AXLE 1994 Volvo 960 1994 DRIVE AXLES Volvo Differentials & Axle Shafts 960 DESCRIPTION & OPERATION All 960 station wagon models use type 1041 rear axle assembly. All 960 4-door models use type 1045
More informationMASONRY SPECIALS VALID THRU Nov. 30, 2006
MASONRY SPECIALS VALID THRU Nov. 30, 2006 14 PARTNER K750 CUT-OFF SAW New Dual Charge engine technology provides an extremely powerful engine with low emissions and excellent fuel economy. Includes manual
More informationCompact, flexible, clever: One 10.8 volt battery for all tools!
Compact, flexible, clever: One 10.8 volt battery for all tools! Make it your home with the 10.8 volt cordless system from Bosch. Whether in the house or garden, the tools impress with their compact power
More informationLow Pressure Air Spraying Equipment. FineCoat Outstanding Spray Pattern. Light and Compact. Extremely Quiet
Low Pressure Air Spraying Equipment FineCoat 8800 Outstanding Spray Pattern Light and Compact Extremely Quiet Low Pressure spraying unit compact and powerful with an outstandingly fine spray pattern Excellent
More informationAssembly Tools. FUJI TOOLS - THE BEST OF THE BEST - Need to know more? : 5
6 Pulse Wrenches Shut-off type 11 Geared Pulse Wrenches Shut-off type 13 Pulse Wrenches 14 Impact Wrenches 17 Screwdrivers 22 Open-end Wrenches / Ratchet Wrenches 24 Accessories 25 FUJI TOOLS - THE BEST
More informationPARTS LIST. Clarke CRD1250 Rotary Hammer Drill. Part Number:
PARTS LIST Clarke CRD1250 Rotary Hammer Drill Part Number: - 6482015 Quantity Description Part Number 1 SLIDE CLIP ASSY GRCRD62029 1 CIRCLIP GRCRD62030 1 FRONT CAP ASSY GRCRD62031 1 CON.ROD ASSY GRCRD62070
More informationQuality tools at affordable prices
2010 Quality tools at affordable prices Over 45 years experience offering quality tools at affordable prices Power Tools Cordless Drills... 4-6 Corded Drills... 6-7 Multifunction Tools... 7 Table Saw...
More informationHitachi. Power Tools DS 12DVF3 DS 9DVF3 DS 12DVF3 DS 9DVF3 CORDLESS DRIVER DRILLS TECHNICAL DATA AND SERVICE MANUAL MODELS
MODELS DS 12DVF3 DS 9DVF3 Hitachi Power Tools D CORDLESS DRIVER DRILLS DS 12DVF3 DS 9DVF3 TECHNICAL DATA AND SERVICE MANUAL DS 12DVF3 LIST Nos. DS 12DVF3: G818 DS 9DVF3: G817 Mar. 2005 SPECIFICATIONS AND
More informationCORDLESS RANGE. Polígono Indutrial O Rebullón s/n Mos - España -
29 07 CORDLESS RANGE CORDLESS RANGE INNOVATIVE CORDLESS SOLUTIONS FOR TOUGH CONDITIONS AEG POWERTOOLS offer today s professional user a wide range of innovative, powerful cordless solutions that are capable
More informationCordless Power Tools. Ergonomic Design Balanced to Perfection
Cordless Power Tools Ergonomic Design Balanced to Perfection 21 Cordless Power Tools: Engineered for Performance and Long Life Robust Housing Made of fibre glass reinforced polyamide for durability. Aluminum
More information