ANP - SYSTEMS GmbH. All rights of this drawing reserved for ANP-Systems GmbH. hex nut, flat - one side with bull nose H (H ) *
|
|
- Sharlene Dawson
- 5 years ago
- Views:
Transcription
1 ANP - SHS br oupler H (H ) * domed nut H hex nut, flt - one side with bull nose H (H ) * 125 (150) * D 42, (5 * 46 Nr. hrteristi vlue / type H H H H nominl externl dimeter D, nom mm 2 externl dimeter (vlue from stndrd) D mm 6 nominl ross-setion re 1) S 0 mm² nominl weight 2) m kg/m 2,6 2,9 3,4 4,0 8 yield lod 3) F p0.2.nom kn ultimte lod 3) F m.nom kn yield strength 4) R p0.2 N/mm² tensile strength 4) R m N/mm² elongtion t ultimte lod A gt % 15 thred stndrd ISO ) lulted from the nominl weight : S 0 = m 10³ / 7,85 2.) devition: -4,5 bis +4,5 [%] 3.) hrteristi vlue (5%-frtile) 4.) lulted from the hrteristi lod vlue nd nominl weigth, rounded 5.) hrteristi vlue (10%-frtile) * dimensions for type H ,34 flt plte SW ANP - SHS flt plte br type H H H H H H H H H H SW 46 domed plte d ANP - SHS domed plte br type d [mm] All rights of this drwing reserved for ANP-Systems GmbH H H H H H H H H H H Rev. Ind. Dte Remrks Tehn. Dten ktulisiert Drwn ANP - SHS H , H , H nd H L L Cheked Dipl.-Ing. S. Lnger Dipl.-Ing. S. Lnger Christophorusstrße 12, A-5061 Elsbethen Phone +43(0)662/ , Fx -20 E-mil info@np-systems.t H xxx-32_ot Sle / Mßstb Dtei: dtsheet ANP-SHS-rok-nil H0210_bis_H _.pdf Projekt: Zulssungen / ANP-SHS_Fels-und_Bodenngel Tb: 815 Dimensions / Mße in mm
2 ANP - SHS br oupler H hex nut, H D SW hex nut, H hrteristi vlue / type nominl externl dimeter D, nom mm externl dimeter (vlue from stndrd) D mm H H nominl ross-setion re 1) S 0 mm² nominl weight 2) m kg/m 5,0 5,8 yield lod 3) F p0.2.nom kn ultimte lod 3) F m.nom kn yield strength 4) R p0.2 N/mm² tensile strength 4) R m N/mm² elongtion t ultimte lod A gt % thred stndrd 1.) lulted from the nominl weight : S 0 = m 10³ / 7,85 2.) devition: -4,5 bis +4,5 [%] 3.) hrteristi vlue (5%-frtile) 4.) lulted from the hrteristi lod vlue nd nominl weigth, rounded 5.) hrteristi vlue (10%-frtile) 38 37,99 ISO left hnd thred SW 55 lok nut H nd H 2040C-38 SW flt plte ANP - SHS flt plte br type H H All rights of this drwing reserved for ANP-Systems GmbH Rev. Ind. Dte Remrks Drwn Cheked L Dipl.-Ing. S. Lnger H H Christophorusstrße 12, A-5061 Elsbethen Phone +43(0)662/ , Fx -20 E-mil info@np-systems.t ANP - SHS type R 38 H nd H Dtei: dtsheet ANP-SHS-miropile H0420_bis_H pdf Projekt: Zulssungen / ANP-SHS_Mikropfhl H_R38-pile_OT Sle / Mßstb Dimensions / Mße in mm
3 ANP - SHS br oupler H hex nut, H hrteristi vlue / type nominl externl dimeter D, nom mm externl dimeter (vlue from stndrd) D mm D 64 H H nominl ross-setion re 1) S 0 mm² nominl weight 2) m kg/m 7,3 9,0 yield lod 3) F p0.2.nom kn ultimte lod 3) F m.nom kn yield strength 4) R p0.2 N/mm² tensile strength 4) R m N/mm² elongtion t ultimte lod A gt % thred stndrd 1.) lulted from the nominl weight : S 0 = m 10³ / 7,85 2.) devition: -4,5 bis +4,5 [%] 3.) hrteristi vlue (5%-frtile) 4.) lulted from the hrteristi lod vlue nd nominl weigth, rounded 5.) hrteristi vlue (10%-frtile) 51 49,99. to ftory stndrd left hnd thred 180 SW 75 SW 75 SW 75 hex nut, H lok nut H nd H 2040C flt plte ANP - SHS flt plte br type H H All rights of this drwing reserved for ANP-Systems GmbH Rev. Ind. Dte Remrks Drwn Cheked L Dipl.-Ing. S. Lnger H H Christophorusstrße 12, A-5061 Elsbethen Phone +43(0)662/ , Fx -20 E-mil info@np-systems.t ANP - SHS type R 51 H nd H Dtei: dtsheet ANP-SHS-miropile H0630_bis_H pdf Projekt: Zulssungen / ANP-SHS_Mikropfhl H_R51-pile_OT Sle / Mßstb Dimensions / Mße in mm
4 ANP - SHS br oupler hex nut, H H D 76 SW 85 hex nut, H nominl externl dimeter D, nom mm externl dimeter (vlue from stndrd) D mm H H nominl ross-setion re 1) S 0 mm² nominl weight 2) m kg/m 11,5 13,5 yield lod 3) F p0.2.nom kn ultimte lod 3) F m.nom kn yield strength 4) R p0.2 N/mm² tensile strength 4) R m N/mm² hrteristi vlue / type elongtion t ultimte lod A gt % thred stndrd 1.) lulted from the nominl weight : S 0 = m 10³ / 7,85 2.) devition: -4,5 bis +7,0 [%] 3.) hrteristi vlue (5%-frtile) 4.) lulted from the hrteristi lod vlue nd nominl weigth, rounded 5.) hrteristi vlue (10%-frtile) 64 63,8. to ftory stndrd right hnd round thred SW 85 lok nut H nd H 2040C-64 SW flt plte ANP - SHS flt plte br type H H All rights of this drwing reserved for ANP-Systems GmbH Rev. Ind. Dte Remrks Drwn Cheked L Dipl.-Ing. S. Lnger H H Christophorusstrße 12, A-5061 Elsbethen Phone +43(0)662/ , Fx -20 E-mil info@np-systems.t ANP - SHS type RR 64 H nd H Dtei: dtsheet ANP-SHS-miropile H1000_bis_H pdf Projekt: Zulssungen / ANP-SHS_Mikropfhl H_RR64-pile_OT Sle / Mßstb Dimensions / Mße in mm
5 ANP - SHS br oupler H hex nut, H D 95 SW 100 hex nut, H nominl externl dimeter D, nom mm externl dimeter (vlue from stndrd) D mm H H H nominl ross-setion re 1) S 0 mm² nominl weight 2) m kg/m 15,8 17,8 19,7 yield lod 3) F p0.2.nom kn ultimte lod 3) F m.nom kn yield strength 4) R p0.2 N/mm² tensile strength 4) R m N/mm² hrteristi vlue / type elongtion t ultimte lod A gt % thred stndrd 1.) lulted from the nominl weight : S 0 = m 10³ / 7,85 2.) devition: -4,5 bis +7,0 [%] 3.) hrteristi vlue (5%-frtile) 4.) lulted from the hrteristi lod vlue nd nominl weigth, rounded 5.) hrteristi vlue (10%-frtile) 76 76,9. to ftory stndrd right hnd round thred SW 100 lok nut H nd H 2040C-76 SW flt plte ANP - SHS flt plte br type H H All rights of this drwing reserved for ANP-Systems GmbH Rev. Ind. Dte Remrks Drwn L Cheked Dipl.-Ing. S. Lnger H H H H Christophorusstrße 12, A-5061 Elsbethen Phone +43(0)662/ , Fx -20 E-mil info@np-systems.t ANP - SHS type RR 76 H up to H Dtei: dtsheet ANP-SHS-miropile H1400_bis_H pdf Projekt: Zulssungen / ANP-SHS_Mikropfhl H_RR76-pile_OT Sle / Mßstb Dimensions / Mße in mm
6 ANP - SHS br oupler H hex nut, H D 127 SW 130 hex nut, H nominl externl dimeter D, nom mm externl dimeter (vlue from stndrd) D mm nominl ross-setion re 1) S 0 mm² nominl weight 2) m kg/m yield lod 3) F p0.2.nom kn ultimte lod 3) F m.nom kn yield strength 4) R p0.2 N/mm² tensile strength 4) R m N/mm² hrteristi vlue / type H elongtion t ultimte lod A gt % thred stndrd 1.) lulted from the nominl weight : S 0 = m 10³ / 7,85 2.) devition: -4,5 bis +7,0 [%] 3.) hrteristi vlue (5%-frtile) 4.) lulted from the hrteristi lod vlue nd nominl weigth, rounded 5.) hrteristi vlue (10%-frtile) , , to ftory stndrd right hnd round thred SW 130 lok nut H nd H 2040C-108 SW flt plte ANP - SHS flt plte br type H H All rights of this drwing reserved for ANP-Systems GmbH Rev. Ind. Dte Remrks Drwn Cheked L Dipl.-Ing. S. Lnger Christophorusstrße 12, A-5061 Elsbethen Phone +43(0)662/ , Fx -20 E-mil info@np-systems.t ANP - SHS type RR 108 H Dtei: dtsheet ANP-SHS-miropile H pdf Projekt: Zulssungen / ANP-SHS_Mikropfhl H_RR108-pile_OT Sle / Mßstb Dimensions / Mße in mm
AQUILA BOILER DATE P.P REV DESCRIPTION DRAWN AQUILA- BOILER- GA- ASSY. Not Defined DO NOT SCALE DRAWING SIGNATURE TITLE: WELDING:
UNLESS OTHERWISE SPEIFIED: DRWN DESRIPTION DTE DRWN DTE P.P 18.6.15 SIGNTURE DO NOT SLE DRWING QUIL OILER DIMENSIONS RE IN MILLIMETERS PLTE S 11 OILER PLTE STYS & RIVETS 018 15 STEEL 107 OPPER TUES S 059
More informationÅLASTRON S.A. Ag. Ioannis str., Ag. Ioannis Aspropyrgos Tel.: Fax:
ÅLASTRON S.A. Ag. Ionnis str., Ag. Ionnis 193 00 Aspropyrgos Tel.: +30 210 5515000 Fx: +30 210 5515015 www.elstron.gr elstron@elstron.gr 1 SQUARE HOLLOW SECTIONS (EN 10219) Dimensions Cross section Weight
More informationFree Machining Austenitic Ferritic + Martensitic Pure Titanium Titanium Alloys Stainless Steels Stainless Steels <950N/mm 2
& - Tps For Stinless Steels These top qulity Tps re mde in Switzerlnd, by DC-Swiss, one of the leding Tp Mnufcturers in Europe. All the Tps re mde of - (Powder Metl). This mteril hs proven to be the best
More informationPROPOSED BUILDING PLINTH AREA sq.m.
N 2028 PROPOSED BUILDING PLINTH RE 168.71 sq.m. 8585 610 2911 TO BE 1934 DTE 4556 3499 2269 2846 13972 10853 12293 15701 9044 ELETION OMISSION DT KNTIPTH KTHMNDU NEPL SITE PLN RHITET: DRWN BY: DTE: MY
More informationBIMETAL-POINTER-THERMOMETER
BIMETA-POINTER-THERMOMETER Chemicl version cc. EN 30 byonet cse IP 6 With or without filling Suitble for chemicl nd petrochemicl industry, food, pulp nd pper industry nd for mchine nd pprtus contruction.
More informationP3IC / P3ICP. Datenblatt. Absolute pressure transducer. Industrial Class. Special features. Dimensions (in mm) B en 1
P3IC / P3ICP Absolute pressure trnsducer Industril Clss Dtenbltt Specil fetures - For sttic nd dynmic pressure vrince, pressure peks nd pressure oscilltions - Nominl (rted) pressure 10 br to 3000 br -
More informationSECTION A-A
40.08 D 8 6 5 4 3 2 1 WRNING: IF THERE RE NY DISCREPNCIES ETWEEN THE CD FILE ND THE DRWING, THE DRWING WILL TKE PRECEDENCE. IF IN DOUT, SK. D C 51.1 48 20.25 18 C 23.68 15.12 NOTE: DRWER UNIT NOT INCLUDED,
More informationWARNING: IF THERE ARE ANY DISCREPANCIES BETWEEN THE CAD FILE AND THE DRAWING, THE DRAWING WILL TAKE PRECEDENCE. IF IN DOUBT, ASK.
28.48 DJUSTLE 5.64 19.78 DJUSTLE D 8 7 6 5 4 3 2 1 20.37 WRNING: IF THERE RE NY DISCREPNCIES ETWEEN THE CD FILE ND THE DRWING, THE DRWING WILL TKE PRECEDENCE. IF IN DOUT, SK. D 51.80 48.00 9.57 C C 18.00
More informationSOLENOID VALVES / DIRECTIONAL CONTROL VALVES
LOW-OWE ONSUMTION ILOT-OETED DIETIONL ONTOL VLVE * SIZE 04/0/10 This is n ssemly of solenoid vlve nd directionl control vlve to operte the directionl control vlve (min vlve) y mens of the pilot pressure
More informationP3IC / P3ICP. Datenblatt. Absolute pressure transducer. Industrial Class" Special features. Dimensions (in mm) B en
P3IC / P3ICP Absolute pressure trnsducer Industril Clss" Dtenbltt Specil fetures For sttic nd dynmic pressure vrince, pressure peks nd pressure oscilltions Nominl (rted) pressure 10 br to 3000 br Strin
More informationProduct range MEGAlife
Product rnge Fx enquiries: +49 89 76909-11 sles@iwis.com MEGAlife MEGAlife mintennce free roller nd conveyor chins cn be pplied in ll res where post instlltion lubriction is not t ll or only prtly possible.
More informationALEX-250 BOX SET INSULATION SECTOR BOX ALEX-250
TEHNIL SPEIFITIONS LEX-250 BOX SET DTE 29/03/2016 PGE 1/2 (2:1) 027386 UPPER / OPENING PRO- FILE LUMINIUM LEX-250 026082 RUBBER LIPPING 027383 EXTERIOR LEVELNESS PROFILE LUMINIUM BOX LEX-250 026015 BRUSH
More informationHF Bloc-...-VPS HF Bloc-...-DSLC-SG HF Bloc-...-DSLC-HP
HF Blo Doule vlve omintion Nominl dimeter DN 50 - DN 300 HF Blo-...-VPS HF Blo-...-DSLC-SG HF Blo-...-DSLC-HP 7.70 Printed in Germny Edition 02.10 Nr. 255 933 1 6 Tehnology DUNGS doule vlve omintion HF
More informationAtlas Copco Drills. Higher level of performance
Atls Copco Higher level of performnce Pistol Grip LBB, COMBI Regrdless of which model you choose, you'll get product with superior ergonomics nd productivity. Quiet Very low noise level. Comfortble grip
More informationSolenoid Pilot Operated Directional Control Valve
Contct Detils efore using the product, plese check the guide pges t the front of this ctlog. http://www.dikinpmc.com/en/ For ltest informtion, PDF ctlogs nd opertion mnuls Solenoid Pilot Operted Directionl
More informationClassic 9. Sliding Door Systems, C-Profile
Clssi 9 Sliding oor Systems, C-Profile Tle of Contents Clssi 9 - Tue rive Systems, C-Profile Trks, Joint Brkets Hngers Srew-on Pltes Fixing Brkets Side Fixing Brkets Trk Stoppers U-Trks nd Guide Rollers
More informationPOWER COMBICON Plugs and Headers PC 6/ for Currents up to 41 A, mm Pitch
POWER COMBICON Plugs nd Heders PC 6/ for Currents up to 41 A, The PC 6 plug connector fetures highly conductive metl lloys to offer current crrying cpcity of 41 A t rted voltge of 1000 V. A double steel
More information2 Way Slip-In Cartridge Valves Series CE, CP, C
tlogue H-3500/UK hrcteristics Wy Slip-In rtridge lves Series E,, wy slip-in crtridge vlves re hydruliclly controlled set vlves tht re designed for compct block instlltion. Slip-in crtridge, cover, nd pilot
More informationQuality HSS (EW 9 Co 10 - cobalt 10%). Ø x l mm 16 x x x x x
Engrver's points Tool holder its Cutting-Off nd Grooving Tools 1812-1816 Engrver's Points With rough-ground profile. For use on tempered nd chrome-nickel steel. For engrving lettering, profiling for contours,
More informationProportional directional valves
/4 Proportionl directionl vlves 6.9 Type 4WRE nd 4WREE NG 6 nd p to r p to 8 L/min Contents Function nd configurtion Symols Ordering code Technicl dt 4 Electricl connections, plug-in connectors Integrted
More informationSolenoid Pilot Operated Directional Control Valve
efore using the product, plese check the guide pges t the front of this ctlog. http://www.dikinpmc.com/en/ Solenoid Pilot Operted Directionl Control Vlve Fetures hese models relize high-pressure lrge-flow-rte
More informationInstallation Instruction
CIVCON MNIFOLD INSTLLTION MNUL REVISION 5/9/05 PETROLEUM MNIFOLD for TNK TRUCKS Installation Instruction Unit of Knappco, Inc. Phone: 86-74-6600 Fax: 86-74-06 CIVCON MNIFOLD INSTLLTION MNUL REVISION 5/9/05
More informationC400 (6 in.) GEAR OPERATED SQUEEZE-OFF TOOL FOR PE PIPE
1825 ECN1825 C400 (6 in.) GER OPERTED SQUEEZE-OFF TOOL FOR PE PIPE Squeezing Pipe Set the Gauge Plates (3) on each side of the tool to the specific pipe size and SDR value. (See Picture 3) Ensure the desired
More informationWorld s Leading Supplier of Fastener Inspection Equipment
World s Leding Supplier of Fstener Inspection Equipment clibrtion Price list Qulity Service for your Qulity Deprtment Plese include the following with your clibrtion order: 1 PO Number 1 Clibrtion Cycle
More informationSection 7 Stainless Steel 316 Threaded Fittings
Section 7 Stainless Steel 316 Threaded Fittings Edition 3 121 [7] STINLESS STEEL 316 THREDED FITTINGS Specifications bout Stainless Steel - Stainless steel can be defined as a steel alloy that has a minimum
More informationSolenoid Operated Proportional Directional Control Valve (with Pressure Compensation, Multiple Valve Series)
Solenoid Operted Proportionl Directionl Control Vlve (with Pressure Compenstion, Multiple Vlve Series) Hydrulic circuit (Exmple) v Fetures hese stcking type control vlves show pressure compensted type
More informationP.F. Hexagon Head Bolts/Screws
Metric Series-Dimensions 1. The bolts and screws will generally conform to IS : 1364, ISO 4014, ISO 4017 and DIN 931/933.. Threads will conform to class 6g of IS : 418, Coarse Series. 3. Material : Panchsheel
More informationRoller and ball bars for easy and safe die change
Roller nd bll brs for esy nd sfe die chnge T-slot tolernces cc. to DIN 6 b c h n min. mx. mx. 8 H8 + +,6 H8 37 +3 +,6 8 H8 +4 0 + 48 56,6 H8 56 +4 5 +3 6 7,5 Dimensions in mm h min. = smllest dimension
More informationPneumatic Actuators 1000, 1400, 2800, and 2 x 2800 cm² Type 3271 and Type 3277 for integral positioner attachment Hand-operated Actuator Type 3273
Pneumtic Actutors 000, 400, 2800, nd 2 x 2800 cm² Type 27 nd Type 277 for integrl positioner ttchment nd-operted Actutor Type 27 Appliction Liner ctutor in prticulr for ttchment to Series 240, 250, nd
More information5 X1 6 X1 1 X2 2 X2 9 X1 4
0 UGER SSEMBLY, 0 8 ITEM NO. PRT NO. DESCRIPTION QTY 0 CBLE,TRUSS,LONG,/FT, GLV,0 0 CBLE,TRUSS,SHORT,/FT, GLV,0 PB000 FRME SSEMBLY, 0 4 PB000 INFEED HOUSING SSEMBLY, 0XX PB000 TUBE SSEMBLY, DISCHRGE, 0
More information4 X1 X X1 9 X1 A1082
- MODEL(S) 08 UGER, BSE MODEL, 08 8 0 ITEM NO. PRT NO. DESCRIPTION QTY 00 CBLE,TRUSS,SHORT,/FT, GLV,0 CBLE /" X 0 FT TRUSS, LONG, 08 PB000 INFEED HOUSING SSEMBLY, 0XX PB00 CRRIGE SM, 08 PB00 TUBE SSEMBLY,
More informationCLAMP-CLOSED PIPE-STL BLK 1/2" (540) CLAMP-GROUNDING,PIPE CLAMP-CLOSED CLAMP-CLOSED
PIPE-STL LK /" 006-0-000 (700) 5598-0-0 SREW 000G-0- ELOW-STL, 90 DEG 0055-0-000 PIPE-STL LK /" 006-0-000 (50) ELOW-RSS-90,/FX/FPT 0070-0-000 LMP-GROUNDING,PIPE 0758-0-000 PIPE-STL LK /" 006-0-000 (805)
More information00083FAB-DC DRAWN BY DATE CHK SCALE SIZE
D0D/6 THIS COPY IS PROVIDED ON RESTRICTED SIS ND IS NOT TO E USED IN NY WY DETRIMENTL TO THE INTERESTS OF PNDUIT CORP. 0 5/4/8 SPLIT SIDE PNEL JGC TOP CP CURVED PERFORTED SINGLE HINGE DOOR SPLIT SIDE PNEL
More information631 ALLOWANES AND TOLERANCES
631 ALLOWANES AND TOLERANCES ANSI Fits. Tbles 3 through 9 inclusive show series of stndrd types nd clsses of fits on unilterl hole bsis, such tht the fit produced by mting prts in ny one clss will produce
More informationBoring Instructions for Steel Hubs
Couplings teel Hub Boring, Keyseting, etscrews & Puller Holes All Types (Pge 1 of 8) Figure 1 Figure 2 Figure 5 Boring Instructions for teel Hubs Refer to the pproprite selection guide for coupling hub
More informationDETAIL OF DUCT FABRICATION & SUPPORTS
DETIL OF DUT FRITION & SUPPORTS DESRIPTION IRNIN PETROLEUM STNDRDS NO REVISION PERMITTED UNLESS PPROVED Y STNDRD ORGNIZTION OVER SEET DRWING No. IPSDR013 ST 1 FIG. SUGGESTED SIZING DUT SIZE mm (in) ND
More informationALUMINUM ENTRANCE DOORS
DOORS REVISION SHEET DESRIPTION 1 - GENERL NOTES & GLZING DETIL 2 - ELEVTIONS, NHOR LYOUT & ONFIGURTIONS 3 ELEVTIONS, NHOR LYOUT & ONFIGURTIONS - - VERTIL DETILS - HED & SILL OPTIONS 2. DEQUY OF THE EXISTING
More informationRAPID-AIR OPERATING INSTRUCTIONS FOR P1V, P1M, P4V, P4M, P1W, P1WM RAPID-ROLL POWER ROLL
RPID-IR OPERTING INSTRUCTIONS FOR PV, PM, PV, PM, PW, PWM RPID-ROLL POWER ROLL RPID-IR 0 KISHWUKEE ST. ROCKFORD, IL. 0- PHONE: () 3- FX: () 3-3 WE SITE: www.rapidair.com TLE OF CONTENTS PGE. RPID-ROLL
More informationDMC-500 TM. DC Motor Drive Control. Operation / Installation Manual Manual Part Number: S8M5003 Date: August 11, Computer Weld Technology, Inc.
omputer Weld Technology, Inc. 070 Old ammel N Houston Rd. Houston, TX 77086 Telephone: (7) 46-8 Fax: (7) 46-50 DM-500 TM D Motor Drive ontrol Operation / Installation Manual Manual Part Number: S8M500
More informationPIPE SUPPORTS IRANIAN PETROLEUM STANDARDS COVER SHEET B A REV. DRAWING No. DATE DATE IPS-D-AR-012 DESCRIPTION
SUPPORTS DESRIPTION IRNIN PETROLEUM STNDRDS NO REVISION PERMITTED UNLESS PPROVED Y STNDRD ORGNIZTION OVER SHEET DRWING No. IPS-D-R-0 SHT ONRETE JOISTS STEEL JOISTS WOOD JOISTS NOTE: STRUTURL STEEL EM SEE
More informationSolenoid Pilot Operated Directional Control Valve
Contct Detils efore using the product, plese check the http://www.dikinpmc.com/en/ For ltest informtion, DF ctlogs nd opertion mnuls Solenoid ilot Operted Directionl Control Vlve Fetures hese models relize
More informationCable Trolleys for C-Rails Program
Cble Trolleys for C-Rils Progrm 02 0 0260 Contents C-Ril nd Accessories Progrm 02 C-Ril x... 2 Trck Coupler... 2 End Stop... 2 Trck Support Brcket... 2 Support Arm nd Girder Clip... 3 Brcket... 3 Cble
More informationBATTERY DISCONNECT UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN INCHES [MM]
ISIONS DESCRIPTION DTE BY 366 PRODUCTION RELESE 8/2/02 BF 002 3698 LOWER INPUT IMPEDNCE LEVEL 9/19/02 BF 003 4688 DD CONFORML COTING 1/23/06 BF 004 48 DD HETSHRINK TO TERMINL POST //06 BF 5303 UPDTE I
More informationUltrasonic Flow Meter
Ultrsonic Flow Meter mesuring monitoring nlysing Mesuring rnge: up to 20 m/s Accurcy: ±0.5% of m. v. pmx PN 100, tmx 180 C Flnge DN 25...1000, DIN /ANI teel or stinless steel 1.4404 Anlogue, frequency,
More informationA3 ORIGINAL DO NOT SCALE THIS DRAWING - USE FIGURED DIMENSIONS ONLY VERIFY ALL DIMENSIONS ON SITE
D D LNCEFIELD ROD 11001 D 2 3 4 5 6 7 50mm T FULL SIZE PRELIMINRY ISSUE 10/12/15 ISSUED FOR INFORMTION RM GW RM DR Parsons rinckerhoff ustralia Pty Limited ("P") this document ("the information") is the
More informationEËÁÓÔÑÏÍ Á.Å.B.E. Ïäüò Áã. ÉùÜííç, Áã. ÉùÜííçò Ô.Ê Áóðñüðõñãïò Ôçë.: Fax:
EËÁÓÔÑÏÍ Á.Å.B.E. Ïäüò Áã. ÉùÜííç, Áã. ÉùÜííçò Ô.Ê. 193 00 Áóðñüðõñãïò Ôçë.: 210 5515000 Fx: 210 5515015 elstron@elstron.gr www.elstron.gr 1 ΚΟΙΛΕΣ ΔΙΑΤΟΜΕΣ & ΣΩΛΗΝΕΣ ΚΑΤΑΣΚΕΥΩΝ ΤΕΤΡΑΓΩΝΕΣ ΚΟΙΛΕΣ ΔΙΑΤΟΜΕΣ
More informationJASON URETHANE POWER TRANSMISSION BELTS
JSON URETHNE POWER TRNSMISSION BELTS UNIFLE BELTS Manufactured in urethane with continuous helically wound steel cable cords, Jason's Uniflex belts are ideal for situations where high stress and load demands
More informationSRX IVL LANDFILL PUMP BOTTOM LOADING
REV DESCRIPTION DTE PPROVED RELESE FOR PRODUCTION 5/9/008 SWells 6 7 6 6 9 0 0 8 8 7 5 5 5 8 9 8 5 ) THE MGNET ITEM 5 IS INSTLLED INTO THE PUMP HED NORTH POLE FIRST. 9 8 7 6 DRWN SWells 5/9/008 Q 75 West
More informationJET PUMP R1 JUNE 1996 JET PUMP
JET PUMP 5 90-831996R1 JUNE 1996 JET PUMP 5-1 Tle Of Contents Pge Generl Informtion....................... 5-1 Priniples of Opertion................. 5-1 Speil Tools.......................... 5-2 Serviing
More informationTechnical specification. Model Max.flow rate (l/min) Working pressure (MPa) Single solenoid double solenoids. Weight (kgs) Spool return
WE series solenoid directionl control vlves WE series directionl control vlves re solenoid operted directionl spool vlves, these vlves re used to the strt, stop nd direct oil flow. echnicl specifiction
More information11 263/ Radial Piston Pump Model R4 /Series 2X Fixed Displacement. Ordering Code 1 PF 1 R4 2X R Replaces:
ize.60 to 0.00 Rdil iston ump Model R4 /eries X Fixed Displcement 0,0 I (00 br).9 in /rev (9.4 cm /rev) RA 6/0.9 RA 6/0.9 Replces: 06.89 K 6/ Rdil piston pump with 0 pistons nd prllel shft Chrcteristics:
More informationCONSTRUCTION NO. NEW STREET, HOUSE, ADDRESS ASHFIELD ROAD, NORTON, IP31 3ND DINING 05 UTILITY 04 STUDY 03 SITTING ROOM HALLWAY WC 07 KITCHEN 06
9725 5235 453 D 6697 2362 Floor vent SITTING ROOM 28 70 60 52 9 450 788 D W D Wter 3639 0 2441 0softner 31 ID Y SPEILIST ID STUDY 2474 1 OILER RD ID G w/m t/d N HLLWY Y SPEILIST ID ID 0 W UTILITY W 664
More informationMurtfeldt Internet Chain Tensioners for Roller Chains to DIN8187
Murtfeldt Internet www.murtfeldt.de Chin Tensioners for Roller Chins to DIN8187 185 186 Murtfeldt E-mil info@murtfeldt.de Murtfeldt Fxline +49-231- 25 10 21 Chin Tensioners with Arc Segment Profile for
More informationPOWER TRIM. Table of Contents. Section 5B - Trim Cylinders
SERVICE MANUAL NUMBER 14 Tle of Contents POWER TRIM Setion 5B - Trim Cylinders TRIM CYLINDERS Speifitions....................... 5B-2 Torque Speifitions............. 5B-2 Speil Tools.....................
More informationMICROMASTER 440 Inverter
MICROMASTER 440 Inverter Frme size V to 240 V 1/3 AC 380 V to 480 V 3 AC 500 V to 600 V 3 AC A 0.12 kw to 0.75 kw 0.37 kw to 1.5 kw The quoted outputs re B 1.1 kw to 2.2 kw 2.2 kw to 4 kw vlid for CT opertion.
More informationSHEET 1 OF 6
REVISIONS REV DESCRIPTION CHG.NO. PP'D DTE SENSOR WELD NECK MOUNTING FLNGE & WELD FTG. (FCTORY WELDED) VILBLE IN SME B16.5 RF & RTJ, ND EN 1092-1 RF. REFER TO TBLE 1 ON SHEET 2 OR FOR S ND DIMENSIONS NEW
More informationNIC Nano 0.85 CTO-Balloons For your most challenging cases
Whtever we lim to hve only your own experiene with our produts will onvine you. NIC Nno 0.85 CTO-Blloons For your most hllenging ses Aville in RX nd OTW version OTW version with 160 m usle length High
More informationORDER CODES CODE. Special limits of error High-Purity MgO Insulation (99.4% Pure) Use this table only if options are desired.
MgO Insulated Thermocouples with Extension Leadwire MgO Insulated Thermocouples with Sheath Terminations Pyromation MgO thermocouple assembly consists of a thermocouple element swaged in hard-packed, standard-purity
More informationSureForce Bar Clamps. More powerful clamping force with less effort
The Pros Know SureFore Br Clmps More powerful lmping fore with less effort EXCEPTIONAL RELIABLE TOUGH The essene of n Amerin legy Totlly seled threds withstnd high impt work environments inluding dust,
More informationORDER CODES CODE SINGLE DUPLEX TRIPLEX E EE - J JJ JJJ K KK KKK T TT - N NN -
MgO Insulated Thermocouples with Extension Leadwire MgO Insulated Thermocouples with Sheath Terminations Pyromation MgO thermocouple assembly consists of a thermocouple element swaged in hard-packed, standard-purity
More informationHFKN. The SMW-AUTOBLOK. Technology at the highest level:
Tehnology t the highest level: The SMWAUTOBOK FK Esy lurition even on vertil mhines with 3 rdil uiltin grese nipples. rge through hole for full use of spindle ore. igh effiieny of the wedge r drive ensures
More information(E) WIDE BEARING ENCAPSULATED (M) MEDIUM BEARING ENCAPSULATED CLEARANCE SLEEVE MEDIUM BEARING SLEEVE WIDE BEARING SLEEVE
HUCK INTERACTIVE CD ROM : SPECIFICATION DRAWINGS C C 10.03 10.03 B B F E D F E D (E) WIDE BEARING ENCAPSULATED (M) MEDIUM BEARING ENCAPSULATED J J J K K K WIDE BEARING SLEEVE MEDIUM BEARING SLEEVE CLEARANCE
More information4/3-4/2 Directional valve elements L8_81 (ED4-P1) with or without LS connections. RE Edition: Replaces:
4/ - 4/ Directionl vlve elements L8_81 with proportionl (ED4-1) control nd with or without LS connections L8_81 (ED4-1) RE 181-1 Edition: 9.18 Replces: 7.1.17 Size Series Mximum operting pressure r (4
More informationSeries 250 Type and Type Pneumatic Control Valves Type 3251 Globe Valve
Series 250 Type 3251-1 nd Type 3251-7 Pneumtic Control Vlves Type 3251 Globe Vlve DIN version Appliction Control vlve for process engineering pplictions with high industril requirements Nominl size DN
More informationModel 1001/1001HPS Drinking Fountain
INSTLLTION, OPERTION & MINTENNCE INSTRUCTIONS Kleppe Lane Sparks, NV 89-667 (77) 9-72 Fax (77) 9-72 E-mail: haws@hawsco.com website: www.hawsco.com Model 00/00HPS Drinking Fountain No. 20760(9) NOTE TO
More informationWINDOW ASM-ATWOOD A (UP TO ) A (AFTER ) 24B 24C 24H 24L 27A 92A A WINDOW ASM-SE-GI A
8 7 4 2 WINDOW SM-TWOOD 4922--02 (UP TO 04-27-09) 4922--0 (FTER 04-28-09) 24 24 24H 4922--0 24L 27 92 WINDOW SM-TWOOD 049-8-02 (UP TO 04-27-09) 049-8-0 (FTER 04-28-09) RELESE REV ZONE REV DTE REVISION
More informationSolenoid Pilot Operated Directional Control Valve
Contct Detils efore using the product, plese check the guide pges t the front of this ctlog. http://www.dikinpmc.com/en/ For ltest informtion, DF ctlogs nd opertion mnuls Solenoid ilot Operted Directionl
More informationCHARACTERIZATION BOARD DO NOT SCALE DWG
RT FILM - fab REVISIONS REV ESRIPTION TE PPROVE INITIL RELESE FE J.HU HNGES PER ER-0570 0PR J.HU HNGES PER ER-059078 0JN6 J.HU.075.75.05 HOLE TOLERNE UNLESS SPEIFIE PLTE: +/- MILS NON PLTE: +/- MIL.00
More informationTYPICAL ELEVATION VIEW
22.2 STNDRD PNEL PRT LIST PRODUCT LENGTH WEIGHT * TUFBRRIER 95.5" PNEL 2426 mm [95.5"] 7.7 kg [7 lbs] TUFBRRIER 9.5" PNEL 3035 mm [9.5"] 9.7 kg [2.3 lbs] TUFBRRIER 43.5" PNEL 3645 mm [43.5"].6 kg [25.6
More informationJET PUMP. Table of Contents. Section 5 - Jet Pump
Tble of Contents JET PUMP Section 5 - Jet Pump JET PUMP Generl Informtion..................... 5-2 Principles of Opertion................ 5-2 Mster Specifictions Jet Pump........... 5-3 Specil Tools........................
More informationAppendix E Head and Valve Assembly Details All D-Style Models 351
Appendix E Hed nd Vlve Assemly Detils All D-Style Models FD Hed Vlve Holddown Assemlies Suction (spec P) 0 0 Suction (spec P) 0 0 Dischrge (ll specs) 0 WFD Hed Appendix E Hed nd Vlve Assemly Detils All
More information2/2 4/4 Solenoid Directional Seat Valve, ISO Size 03
2/2 4/4 Solenoid Directionl Set Vlve, ISO Size 03 Q mx = 40 l/min (11 gpm), p mx = 315 r (4500 psi) idirectionl lek-proof shutoff, direct cting, electriclly operted Series W2N, W2 1 Description With crtridge
More informationPOWER TRIM. Table of Contents. Section 5B - Trim Cylinders
Tle of Contents POWER TRIM Setion 5B - Trim Cylinders Speifitions......................... 5B-2 Torque Speifitions............... 5B-2 Lurints/Selers/Adhesives........ 5B-2 Speil Tools.........................
More informationPRIMARY SIDE CHARACTERIZATION BOARD FABRICATION AD7791 EVAL BOARD DRILL CHART: TOP to BOTTOM ALL UNITS ARE IN MILS TOLERANCE 2.
RT FILM - fab REV REVISIONS ESRIPTION INITIL RELESE TE FE 0PR PPROVE J.HU J.HU.075.75.05.00 (REF) FIGURE RILL HRT: TOP to OTTOM LL UNITS RE IN MILS TOLERNE +.0/-.0 +.0/-.0 +.0/-.0 +.0/-.0 SIZE.0 0.0 5.0
More informationCHAIN GENERAL INFORMATION NEW & USED CHAIN CHAIN. Always in Stock RENTAL AVAILABLE DOMESTIC & IMPORTED GIVE US A CALL
CHIN GENERL INFORMTION CHIN ONE OF THE LRGEST INVENTORIES IN THE COUNTRY NEW & USED CHIN lways in Stock RENTL VILBLE WELDLESS CHIN PROOF COIL CHIN HIGH LSHING COST GURD BUOY CHIN STINLESS STEEL LLOY DOCK
More informationPrecision Pressure Transmitter with Switching Contacts and Display. Interface Setup program. Display 4 characters. Switching output 1.
Dt sheet 405054 Pge 1/7 JUMO DLOS HP Precision Pressure Trnsmitter with Switching Contcts nd Disply Appliction Hydrulic plnts Mchine nd plnt engineering Test benches Lbortory equipment Brief description
More informationINSTALLATION GUIDE P1000T15AOSB CHEVY TAHOE. pro-gard.com RELEASED STRONG RELIABLE SECURE
INSTLLTION GUIDE P000T5OS 05-09 HEVY THOE STRONG RELILE SEURE RELESED 0.9.0 pro-gard.com 00.0.660 THESE OMPONENTS RE REQUIRED TO INSTLL THE PRTITION WXXX57T5 Driver & Passenger Window ars Pro-ell Kit Wing
More information76" MAX. FRAME WIDTH 72" MAX. DOOR OPENING 36" MAX. LEAF WIDTH 30 3/8" MAX. D.L.O. A 4 36" MAX. LEAF WIDTH 30 3/8" MAX. D.L.O. F 5
8 3/" X. 8" X. DO OPENING 83 1/2" X. 7" X. H3 " 30" X. " X. JB NERS IDRIL OPTIONL X. DESIGN LOD ± 0.0 PS WHERE USED 3" X. INTIVE B 7" X. 72" X. DO OPENING 3" 3" 3" 3" 3" X. G 3 L1 IN 20" 0 7/8" 1" TIVE
More informationHOOK UP LAYOUT FOR HEAT GENERATION AND FUEL TANK SYSTEM
HOOK UP LYOUT FOR HET GENERTION ND FUEL TNK SYSTEM DESRIPTION IRNIN PETROLEUM STNDRDS NO REVISION PERMITTED UNLESS PPROVED Y STNDRD ORGNIZTION OVER SHEET DRWING No. IPS-D-R-018 SHT 1 "(DN0) FILL FUEL OIL
More informationHand-operated Actuator Type 3273
Hnd-operted Actutor Type 3273 Appliction Hnd-operted ctutor for ttchment to vlves, especilly for Series 240, 250 nd 260 Control Vlves. Rted trvels of 5 nd 30 mm. Nominl thrusts up to 32 kn The Type 3273
More informationSSAB Water mains PIPES AND FITTINGS
SSAB Wter mins PIPES AND FITTINGS Pipes nd fittings mnufctured y SSAB re used primrily with wter pipeline sizes DN 400-1200. The fittings re mde of steel pressure pipes (ex works delivery) nd cn e coted
More informationp max (see performances table) Q nom (see performances table) bar Nominal flow rate l/min Ambient temperature range C -20 / +60
4 60/7 ED DS* NEUMICLLY OERED DIRECIONL CONROL VLVE SULE MOUNING DS ISO 440-0 DS5 ISO 440-05 p mx (see performnces tle) Q nom (see performnces tle) OERING RINCILE he DS * re pneumticlly operted () directionl
More informationJUMO MIDAS S05 OEM pressure transmitter - universal
Delivery ddress: Mckenrodtstrße 4 609 Fuld, Germny Postl ddress: 605 Fuld, Germny Phone: +49 66 600-0 Fx: +49 66 600-607 Hrlow, Essex CM0 DY, UK Phone: +44 79 655 Fx: +44 79 656 Cnstot, NY 0, USA Phone:
More informationSOLENOID VALVES / DIRECTIONAL CONTROL VALVES
OM SOLENOID VLVE HD1N SIZE 025 Fetures HD1 N Series (for 7 M) 1. ompct 2. Dust- nd wter-proof of highest level (I67), thnks to use of M12-4 pin connector 3. Since it opertes t low currency, it cn e connected
More informationMANHOLE GRADE RING HEIGHT = 40mm*, 50mm, 75mm 75mm WITH STEP CON CAST PIPE STENCIL ISOMETRIC VIEW MATERIAL LIST PLAN VIEW PRODUCT VARIABLES
CCP-OKVILLE (HEIGHT) ( OF MFG) LUM. STEP FOR GM00752 ONLY 54 102 715 95 D5 855 HOOP STEEL 150 LP OR BUTT WELD 991 MTERIL LIST QTY E REMRK 1 E LUMIN. STEP FOR 75mm ONLY 1 E HOOP STEEL RD. 855 X D5 PLN VIEW
More informationoééçêí=çå=cáåçáåöë= OMNUMOMP=Ó=N^== - english version - Truncated version dated 12 th July 2018
oééçêí=çå=cáåçáåöë= = OMNUMOMP=Ó=N^== - english version - Truncated version dated 12 th July 2018 Commissioning Party: Renusol Europe GmbH Mr Nils Rossbach Piccoloministr. 2 51063 Cologne Testing location:
More informationDismantling Joint RESTRAINED DOUBLE FLANGED FITTING EASY TO INSTALL ALLOWS FOR ADJUSTMENT 316 STAINLESS STEEL FASTENERS
WM22 Helden RESTRINE OULE FLNGE FITTING ESY TO INSTLL LLOWS FOR JUSTMENT 316 STINLESS STEEL FSTENERS WM22 Helden eveloped for complete versatility, the range was developed to provide greater versatility
More informationSpark Plug Fouling 3.0 Liter OptiMax
WARRANTY INFORMATION PARTS INFORMATION SERVICE INFORMATION Bulletin No. 2002-07 Circulte to: Sles Mnger Accounting Service Mnger Technicin Prts Mnger Sprk Plug Fouling 3.0 Liter OptiMx Models Affected
More information2/2 Solenoid Operated Seat Valve, ISO Size 03
2/2 Solenoid Operted Set Vlve, ISO Size 03 Q mx = 40 l/min (11 gpm), p mx = 315 r (4500 psi) Sndwich design, idirectionl lek-proof shutoff, direct cting, electriclly operted 1 Description 2 echnicl dt
More informationPRODUCTS HOT ROLLED REINFORCING BARS WIDE ROD BILLET FROM CONTINUOUS CASTING WELDED WIRE MESH
PRODUCTS HOT ROLLED REINFORCING BARS WIDE ROD BILLET FROM CONTINUOUS CASTING WELDED WIRE MESH INDEX 01. HOT ROLLED REINFORCING BARS PAGE 4 02. WIRE ROD PAGE 6 03. BILLET FROM CONTINUOUS CASTING PAGE 8
More informationTHIS COPY IS PROVIDED ON A RESTRICTED BASIS AND IS NOT TO BE USED IN ANY WAY DETRIMENTAL TO THE INTERESTS OF PANDUIT CORP.
THIS COPY IS PROVIDED ON RESTRICTED SIS ND IS NOT TO E USED IN NY WY DETRIMENTL TO THE INTERESTS OF PNDUIT CORP. DUL HINGE PERFORTED FRONT SPLIT SIDE PNEL SOLID SELED RER SPLIT SIDE PNEL VED REDY INTEGRL
More information2/2 4/4 Solenoid Directional Seat Valve, ISO Size 03
2/2 4/4 Solenoid Directionl Set Vlve, ISO Size 03 Q mx = 20 l/min, p mx = 315 r idirectionl set-vlve shut-off, direct cting, electriclly operted 1 Description he W2N / W2 series of 2/2 4/4 solenoid operted
More informationCompact Design. Geislinger
Compct Design Geislinger SAE-Coupling he technology behind the Geislinger steel spring coupling with its extrordinry relibility hs been proven for more thn 50 yers. his successful design hs now been further
More informationR E V I S I O N REV. DRAWN BY ECO No DESCRIPTION DATE APPROVED BILL OF MATERIALS
NOTES: UNLESS OTHERWISE SPECIFIED. CORNERS DRWN SHRP TO E R.005 MXIMUM. 2. EXTERIOR SURFCE TEXTURE TO E EQUIVLENT TO MT-007. TEXTURE ON ENCLOSURE WILL VRY FROM TIME TO TIME S THE TOOL WERS ND IT ECOMES
More informationC11536 DRAWN BY DATE CHK SCALE SIZE
THIS COPY IS PROVIDED ON RESTRICTED SIS ND IS NOT TO E USED IN NY WY DETRIMENTL TO THE INTERESTS OF PNDUIT CORP. Engineer Grade Prismatic Reflective luminum (Dim "") (Dim "") 00 VN CCESS 00 RESERVED PRKING
More informationFUJIKURA LINE PRODUCTS
FUJIKURA LINE PRODUCTS Line Prouts Line Prouts re pplie in the simplest mnner, n no tools of ny esrip on nor tehnil skills re require for instll on. De-En Grip Line Grip Armor Ro Line Gur Multiple Tie
More informationSection 12 Contents. Product Reference Numbers and Ordering Information 12.10
Section 12 Contents DESCRIPTION Product Reference Numbers and Ordering Information PGE NUMER 12.10 Technical Details Head Shapes vailable Finishes vailable Camlock Fixing Methods Explaining Keying Details
More informationN2-GEN. TL SERIES Nitrogen Generators. Arc Suppression System. Transmission Line Pressurization. South-Tek
TL SERIES Nitrogen Generators Transmission Line Pressurization N2-GEN rc Suppression System www.southteksystems.com commercialsales@southteksystems.com 888.526.6284 South-Tek Systems 2 N 2 -GEN rc Suppression
More informationThreaded Bar and Accessories
ed ar and ccessories old Rolled ed ar and ccessories pprox. Major ar Grade # # #4 0 0 0 #2 Nomal / 2 /4 / 5 2 /4 55 2 /4 55 2 /2 64 2 /2 64 /2 9 M. Net rea Thru s 2 ( 2 ) 0.7 5.0.000 6.0.270 9.0.5 06.0
More informationGAS HYDRAULIC PUMP Max. Capacity: 10,000 PSI
SPX Corporation th Street Rockford, IL 09-99 US Tech. Services: (00) - Fax: (00) - Order Entry: (00) - Fax: (00) -0 Parts List for: Form No. 000 PG0ST Internet ddress: http://www.powerteam.com GS HYDRULIC
More information