AAMA THERMAL PERFORMANCE REPORT. Rendered to: TORO ALUMINUM. SERIES/MODEL: Commdoor 225 Awning (Project Out) TYPE: Projecting, Awning

Transcription

1 Architectural Testing AAMA THERMAL PERFORMANCE REPORT Rendered to: TORO ALUMINUM SERIES/MODEL: Commdoor 225 Awning (Project Out) TYPE: Projecting, Awning Report No: Report Date: 130 Derry Court York, PA phone: fax: D /30/13

2 Architectural Testing AAMA THERMAL PERFORMANCE REPORT Rendered to: TORO ALUMINUM 330 Applewood Crescent Concord, ON L4K 4V2 Report No: D Report Date: 10/30/13 Simulation Date: 10/30/13 Project Summary: Architectural Testing, Inc. was contracted by Toro Aluminum to provide U-Factor and Solar Heat Gain Coefficient thermal performance ratings on the Commdoor 225 Awning (Project Out) Projecting, Awning. The thermal performance ratings were determined in accordance with AAMA , Standard Practice for Determining the Thermal Performance Characteristics of Fenestration Systems Installed in Commercial Building. Reference Documents: AAMA , Standard Practice for Determining the Thermal Performance Characteristics of Fenestration Systems Installed in Commercial Buildings NFRC , Procedure for Determining Fenestration Product U-Factors NFRC , Procedure for Determining Fenestration Product Solar Heat Gain Coefficient and Visible Transmittance at Normal Incidence Simulation Specimen Description: Series/Model: Type: Frame Material: Material Finish: Specimen Size: Configuration: Drawing Reference: Commdoor 225 Awning (Project Out) Projecting, Awning Aluminum Thermally Broken Framing System Painted Aluminum 1500mm wide by 600mm high (59-1/16" by 23-5/8") Single vision lite Toro Drawing New Series Casement Open Out RHO-Equal Leg, dated 6/12/ Derry Court York, PA phone: fax:

3 Architectural Testing D Page 2 of 9 Toro Aluminum Commdoor 225 Awning (Project Out) - Projecting, Awning System U-Factor vs. Percentage of Vision Area COG U-Factor System U-Factor (Btu/h ft 2 ºF) Vision Area / Total Area (%) Note: 1 inch Overall - Dual Glazed Glass ( COG) with Aluminum Spacer, Dual Glazed Glass with Heat Mirror ( COG) with Aluminum Spacer

4 Architectural Testing D Page 3 of 9 Toro Aluminum Commdoor 225 Awning (Project Out) - Projecting, Awning System SHGC vs. Percentage of Vision Area COG SHGC System SHGC Vision Area / Total Area (%) System VT vs. Percentage of Vision Area COG VT System VT Vision Area / Total Area (%)

5 Architectural Testing D Page 4 of 9 Toro Aluminum Commdoor 225 Awning (Project Out) - Projecting, Awning Size Specific U-Factor Matrix* Glazing Option Center of Glass U-Factor Overall U-Factor Note: 1 inch Overall - Dual Glazed Glass ( COG) with Aluminum Spacer, Dual Glazed Glass with Heat Mirror ( COG) with Aluminum Spacer

6 Architectural Testing D Page 5 of 9 Toro Aluminum Commdoor 225 Awning (Project Out) - Projecting, Awning Size Specific SHGC Matrix* Size Specific VT Matrix* Center of Glass SHGC Overall SHGC Center of Glass VT Overall VT *Size Specific U-Factor, SHGC, and VT Matrices are based on the standard Projecting, Awning specimen size of 1500mm wide by 600mm high (59-1/16" by 23-5/8"). This represents 63.9% Vision Area / Total Area.

7 Architectural Testing D Page 6 of 9 Option No. COG U-Factor COG Temperature Cross Section Frame Height Frame U-Factor Vision Area Data Edge U-Factor 18.50" 23.62" 44.41" Head L. Jamb R. Jamb Sill Head L. Jamb R. Jamb Sill Head L. Jamb R. Jamb Sill Head L. Jamb R. Jamb Sill Head L. Jamb R. Jamb Sill Head L. Jamb R. Jamb Sill Head L. Jamb R. Jamb Sill Head L. Jamb R. Jamb Sill Head L. Jamb R. Jamb Sill Head L. Jamb R. Jamb Sill % Vision Area 46.26" by Total Product U-Factor NFRC " by 80% Vision Area " by

8 Architectural Testing D Page 7 of 9 Option No. COG U-Factor COG Temperature Cross Section Frame Height Frame U-Factor Vision Area Data Edge U-Factor Total Product U-Factor 55% NFRC 80% Vision Area Vision Area 46.26" 59.06" " by by by 18.50" 23.62" 44.41" Head L. Jamb R. Jamb Sill Head L. Jamb R. Jamb Sill Head L. Jamb R. Jamb Sill Head L. Jamb R. Jamb Sill Head L. Jamb R. Jamb Sill Head L. Jamb R. Jamb Sill Head L. Jamb R. Jamb Sill Head L. Jamb R. Jamb Sill Head L. Jamb R. Jamb Sill Head L. Jamb R. Jamb Sill

9 Architectural Testing D Page 8 of 9 Architectural Testing will service this report for the entire test record retention period. Test records that are retained such as detailed drawings, datasheets, representative samples of test specimens, or other pertinent project documentation will be retained by Architectural Testing, Inc. for the entire test record retention period. The test record retention end date for this report is October 30, Results obtained are simulated values and were secured by using the designated test methods. This report does not constitute certification of this product nor an opinion or endorsement by this laboratory. It is the exclusive property of the client so named herein and relates only to the product simulated. This report may not be reproduced, except in full, without the written approval of Architectural Testing, Inc. For ARCHITECTURAL TESTING, INC.: SIMULATED BY: REVIEWED BY: Kristen L. Livelsberger Senior Simulation Technician Kevin S. Louder Project Engineer KLL:KLL D Attachments (pages): This report is complete only when all attachments listed are included. Appendix A: Drawings and Bills of Material (12)

10 Architectural Testing D Page 9 of 9 Revision Log Rev. # Date Page(s) Revision(s).01R0 10/30/13 All Original Report Issued to Toro Aluminum

11 All drawings and Bills of Material used in simulating this product are enclosed in this Appendix. Appendix A D

12

13

14

15

16

17

18

19

20

21

22

23