COMPUTER SIMULATION U-FACTOR, SHGC, VT PERFORMANCE EVALUATION OF FIXED WINDOW 3000 SERIES CASEMENT WINDOW. Dominion Doors & Windows Ltd.

Transcription

1 COMPUTER SIMULATION U-FACTOR, SHGC, VT PERFORMANCE EVALUATION OF FIXED WINDOW 3000 SERIES CASEMENT WINDOW FOR Dominion Doors & Windows Ltd. IN ACCORDANCE WITH: CAN/CSA A Report to: Dominion Doors & Windows Ltd. 130 Pennsylvania Ave. Unit 8 Concord, Ontario L4K 4A8 Attention: Mr. Bill Papas Telephone: bill@dominiondw.com Report No.: B0188-S1 6 Pages, 1 Appendix Proposal No.: Date: January 3, 2019

2 Fixed Window 3000 Series - Casement Window Computer Simulation Report Page 2 of 6 For Dominion Doors & Windows Ltd. Report No B0188-S1 1.0 INTRODUCTION At the request of Dominion Doors & Windows Ltd., Exova was retained to conduct Energy Performance evaluation computer simulations of a fixed window unit identified as the 3000 Series Casement Window in accordance with CSA A standard as outlined in proposal number Exova Simulation No.: Product Type: Series Model: Simulation Window Size: Simulation CR Cavity Height: Frame Material: Sash Material: Reinforcement Material: B0188-S1 Casement (CSSV) 3000 Series - Casement Window 600 mm (wide) x 1500 mm (high) 1400 mm VY, Vinyl frame members VY, Vinyl Sash members No Reinforcement Note: Physical testing air leakage values, in accordance with the NAFS AAMA/WDMA/CSA 101 / I.S.2/ A standard, used to compute ER rating are based on Exova Report Number: M0260-D2N (dated October 9, 2018). Simulation Glazing Options Outline: No.1: 3 mm Pilkington Clear / mm Arg 90% / 3 mm Gaurdian 80/70 [3] No.2: 4 mm Pilkington Clear / mm Arg 90% / 4 mm Gaurdian 80/70 [3] No.3: 3 mm Guardian 80/70 [2] / mm Arg 90% / 3 mm Gaurdian IS20 [4] No.4: 4 mm Guardian 80/70 [2] / mm Arg 90% / 4 mm Gaurdian IS20 [4] No.5: 3 mm Guardian 62/27 [2] / mm Arg 90% / 3 mm Gaurdian IS20 [4] No.7: 4 mm Guardian 62/27 [2] / mm Arg 90% / 4 mm Gaurdian IS20 [4] No.7: 3 mm Pilkington Clear / mm Arg 90% / 3 mm Gaurdian 80/70 [3] / mm Arg 90% / 3 mm Pilkington Clear No.8: 4 mm Pilkington Clear / mm Arg 90% / 4 mm Gaurdian 80/70 [3] / mm Arg 90% / 4 mm Pilkington Clear No.9: 3 mm Pilkington Clear / mm Arg 90% / 3 mm Gaurdian 80/70 [3] / mm Arg 90% / 3 mm Guardian 80/70 [5] No.10: 4 mm Pilkington Clear / mm Arg 90% / 4 mm Gaurdian 80/70 [3] / mm Arg 90% / 4 mm Guardian 80/70 [5] Note: Square brackets, [#], denote surface layer of coating Glazing Method: Dry, laid in glazed, interior glazing stop with co-extruded dual vinyl fin, coextruded dual vinyl fin on the exterior side. Gas Fill: Gas Fill Method: 90 % Argon / 10 % Air (ARG) Two-Probe Filling Glazing Layers Created in Optics 5: No glazing layers created (NFRC 303 & 304)

3 Fixed Window 3000 Series - Casement Window Computer Simulation Report Page 3 of 6 For Dominion Doors & Windows Ltd. Report No B0188-S1 Spacer Types for Glazing Option: Type: Tremco Eneredge for glazing option: 1 10 Code: ZF-D (Silicone foam spacer dual sealed) Dimension (WxH), mm (in): 4.76 x (0.19 x 0.64) for glazing options: 1, 3, & x (0.19 x 0.56) for glazing options: 2, 4, & x (0.19 x 0.48) for glazing options: 7 & x (0.19 x 0.42) for glazing options: 8 & 10 Primary Sealant: Secondary Sealant: Desiccant: Polysulphide N/A Silica Gel Loose Fill Type: Fenzi Warmedge for glazing option: 1-7 & 9 Code: S6-D (U-shaped steel spacer system with a thermal cap dual sealed) Dimension (WxH), mm (in): 7.11 x (0.28 x 0.64) for glazing options: 1, 3, & x (0.28 x 0.56) for glazing options: 2, 4, & x (0.28 x 0.48) for glazing options: 7 & 9 Primary Sealant: Secondary Sealant: Desiccant: Polysulphide Polysulphide N/A Grid Options (Using NFRC Standard Grid Pattern): None Weatherstripping Configuration: Type, Quantity Installed: Location: Frame Bulb 2 Rows All members Sash Fin 1 row All members Note: Assembly detatil drawings for the above simulationed window unit as provided by the manufacturer have been included in.

4 Fixed Window 3000 Series - Casement Window Computer Simulation Report Page 4 of 6 For Dominion Doors & Windows Ltd. Report No B0188-S1 2.0 PROCEDURE The Building Performance Centre at Exova evaluated the above window in accordance with the procedures outlined in CSA A standard referencing: ANSI/NFRC Procedure for Determining Fenestration Product U-factors ANSI/NFRC Procedure for Determining Fenestration Product Solar Heat Gain Coefficient and Visible Transmittance at Normal Incidence Software Employed: International Glazing Database Version: 62.0 Frame and Edge Modelling Software: Therm Version: Centre of Glass Calculation Software: Window Version: Total Window Unit Calculation Software: Window Version: Simulation Notes: Simulation Date: December 19, 2018 Continuous Hardware Modelled: None Any model additions and removals: No The solar absorptance of dividers and frames is 0.3 for SHGH calculation, unless otherwise stated The exterior boundary condition used unless otherwise stated were ANSI/NFRC Grouping Details of Products: Various Frame and sash options added with the Die#6024 Frame option and die#3459 sash option being the group leader Frame Grouping Calculation Results: Glazing Option No. 9: 3 mm Pilkington Clear / mm Arg 90% / 3 mm Gaurdian 80/70 [3] / mm Arg 90% / 3 mm Guardian 80/70 [5] Spacer: S6-D Fenzi Warmedge Frame Option, Sash Option (Die Drawing No.) U-Factor, W/m 2 -K (Btu/h-ft 2 -F) A,A (6024,3549) (0.210) B,A (3553,3549) (0.206) C,A (3548,3549) (0.210) C,B (3548, 5682) (0.210)

5 Fixed Window 3000 Series - Casement Window Computer Simulation Report Page 5 of 6 For Dominion Doors & Windows Ltd. Report No B0188-S1 3.0 DETAILED SIMULATION RESULTS

6 Fixed Window 3000 Series - Casement Window Computer Simulation Report Page 6 of 6 For Dominion Doors & Windows Ltd. Report No B0188-S1 4.0 TERMS AND CONDITIONS This report is related only to the fenestration product simulated and shall not be reproduced, except in full, without the approval of Exova Canada Inc. The values stated in this reported were rounded as per the CSA A standard unit and measurement requirements. 5.0 REPORT REVISION SUMMARY Revision No: Date: Description of Revisions: Original January 3, 2019 Report issued Reported by: Reviewed by: Scott Hallam, B.Eng. Ext Sunny Ling, C.E.T., Ext Building Systems Specialist, Building Systems Assistant Operations Manager, Building Science Building Science Division Technical Manager, Building Systems Simulator-In-Responsible Charge Building Science Division This report and service are covered under Exova Canada Inc s. Standard Terms and Conditions of Contract which may be found on our company s website or by calling

7 For Dominion Doors & Windows Ltd. Report No B0188-S1 APPENDIX A Simulation Detail Drawings Supplied by Dominion Doors & Windows Ltd. (Reviewed and Authorized by Exova) (12 Pages)

8 For Dominion Windows & Doors Ltd. Report No B0188-S1, Page 1 of 12 Product sash group leader (SH)

9 For Dominion Windows & Doors Ltd. Report No B0188-S1, Page 2 of 12 Product Frame group leader (SH)

10 For Dominion Windows & Doors Ltd. Report No B0188-S1, Page 3 of 12 Product frame group leader (SH)

11 For Dominion Windows & Doors Ltd. Report No B0188-S1, Page 4 of 12 Grouped frame (SH)

12 For Dominion Windows & Doors Ltd. Report No B0188-S1, Page 5 of 12 Grouped frame (SH)

13 For Dominion Windows & Doors Ltd. Report No B0188-S1, Page 6 of 12 Product sash group leader (SH)

14 For Dominion Windows & Doors Ltd. Report No B0188-S1, Page 7 of 12 Grouped frame (SH)

15 For Dominion Windows & Doors Ltd. Report No B0188-S1, Page 8 of 12

16 For Dominion Windows & Doors Ltd. Report No B0188-S1, Page 9 of 12

17 For Dominion Windows & Doors Ltd. Report No B0188-S1, Page 10 of 12

18 For Dominion Windows & Doors Ltd. Report No B0188-S1, Page 11 of 12 Fenzi Warmedge Spacer Silica Gel Loose Fill Polysulphide 5 mm

19 For Dominion Windows & Doors Ltd. Report No B0188-S1, Page 12 of 12 Tremco Eneredge Spacer Polysulphide 4.76 mm