SIZE AND PERFORMANCE SUMMARY GLAZING PERFORMANCE GRILLE PROFILES AND PATTERNS SIZE TABLES DESIGN DATA DETAILED PRODUCT DESCRIPTION CROSS SECTIONS

Transcription

1 SECTIN DIRECTRY SIZE AND PERFRMANCE SUMMARY GLAZING PERFRMANCE GRILLE PRFILES AND PATTERNS SIZE TABLES DESIGN DATA DETAILED PRDUCT DESCRIPTIN CRSS SECTINS The information published in this document is believed to be accurate at the time of publication. However, because we are constantly working to improve our products, specifications are subject to change without notice. Consult your local Pella representative for up-to-date product information. F2-FFDS-1

2 BRAND SUMMARY Pella Impervia Fixed Frame Direct Set windows have all the Pella innovations you demand. The frame and glass stop are made of Duracast fiberglass composite, Pella s patented, five layer, engineered fiberglass composite. Each window uses three-way reinforced corners for increased strength. All frame corners are locked in place with corner locks and injected with a dual purpose sealant / adhesive for long-lasting performance. Frame corners are additionally secured with mechanical fasteners. Pella Impervia windows are pre-finished with powder-coat paint. This paint meets the stringent AAMA 623 standards. Powder-coat paint is resistant to dents, scratches and damaging UV light. Duracast fiberglass composite can withstand extreme heat (over 200 F), intense cold (-40 F), and is seacoast worthy. BLCK FRAME The 3" deep block frame is our most versatile frame. Units can be installed in masonry openings using installation clips, or in wood frame openings using optional fins. Units can also be field-joined together. F2-FFDS-2

3 PRDUCT SELECTIN GUIDE Size Performance Data Sound Transmission Class and utdoor-indoor Transmission Class Size and Performance Data BLCK FRAME SIZES Special Sizes PERFRMANCE 1 Meets or Exceeds AAMA / WDMA Ratings FW-CW50 Hallmark Certified Air Infiltration (cfm / ft 2 of 1.57 psf wind pressure) 0.05 Water Resistance 7.5 psf Design Pressure 50 psf THER PERFRMANCE CRITERIA Forced Entry Resistance Level (Minimum Security Grade) 2 40 Sound Transmission Class and utdoor-indoor Transmission Class Frame Size Tested 3 verall Glazing Thickness Glazing System Exterior Glass Thickness Interior Glass Thickness STC Rating 47-1/2" x 59-1/2" 1" 3mm 3mm /2" x 59-1/2" 1" 3mm 5mm /2" x 59-1/2" 1" 4mm 7mm Laminated /2" x 59-1/2" 1" 5mm 10mm Laminated ITC Rating S = Standard; = ptional (1) Composite units are not AAMA / WDMA performance certified. Pella Impervia composites are engineered to meet performance class and grade shown in the design data tables. (2) The higher the level, the greater the product's ability to resist forced entry. (3) ASTM E 1425 defines standard sizes for acoustical testing. Ratings achieved at that size are representative of all sizes of the same configuration. F2-FFDS-3

4 PRDUCT SELECTIN GUIDE Features and ptions Features and ptions BLCK FRAME GLAZING Glazing Type Dual-pane Insulating Glass Insulated Glass ptions / Low-E Types Clear Insulating Glass (no Low-E coating) Advanced Low-E Insulating Glass SunDefense Low-E Insulating Glass AdvancedComfort Low-E Insulating Glass NaturalSun Low-E Insulating Glass Additional Glass ptions Annealed Glass Tempered Glass bscure Glass 1 Gas Fill / High Altitude Argon High Altitude High Altitude with argon EXTERIR / INTERIR Powder-Coat White Powder-Coat Tan, Brown, Black, or Morning Sky Gray Dual-color (All exterior colors available with White interior) GRILLES Grilles-Between-the-Glass Traditional, Prairie, Top Row Applied Grilles Equally Divided, Unequally Divided and Top Row S S S S S S = Standard; = ptional (1) Contact your local Pella sales representative for current offering. F2-FFDS-4

5 GLAZING PERFRMANCE - TTAL UNIT Fixed Frame Direct Set Glass Thickness Type of Glazing NFRC Certified Product # Glass (mm) Ext. Int. Gap Fill U-Factor Performance Values 1 SHGC VLT CR Shaded Areas Meet ENERGY STAR Performance Criteria in Zones Shown U. S. Canada 2 Zone ER Zone FIXED UNITS N NC SC S " Clear IG PEL-N air with grilles-between-the-glass PEL-N with applied grilles PEL-N " Clear IG PEL-N air with grilles-between-the-glass PEL-N with applied grilles PEL-N " Clear IG PEL-N air with grilles-between-the-glass PEL-N with applied grilles PEL-N " Clear IG PEL-N air with grilles-between-the-glass PEL-N with applied grilles PEL-N " Advanced Low-E IG PEL-N argon with grilles-between-the-glass PEL-N with applied grilles PEL-N " Advanced Low-E IG PEL-N argon with grilles-between-the-glass PEL-N with applied grilles PEL-N " Advanced Low-E IG PEL-N argon with grilles-between-the-glass PEL-N with applied grilles PEL-N " Advanced Low-E IG PEL-N argon with grilles-between-the-glass PEL-N with applied grilles PEL-N " SunDefense IG PEL-N argon with grilles-between-the-glass PEL-N with applied grilles PEL-N " SunDefense IG PEL-N argon with grilles-between-the-glass PEL-N with applied grilles PEL-N " SunDefense IG PEL-N argon with grilles-between-the-glass PEL-N with applied grilles PEL-N " SunDefense IG PEL-N argon with grilles-between-the-glass PEL-N with applied grilles PEL-N " AdvancedComfort Low-E IG PEL-N argon with grilles-between-the-glass PEL-N with applied grilles PEL-N " AdvancedComfort Low-E IG PEL-N argon with grilles-between-the-glass PEL-N with applied grilles PEL-N " AdvancedComfort Low-E IG PEL-N argon with grilles-between-the-glass PEL-N with applied grilles PEL-N " AdvancedComfort Low-E IG PEL-N argon with grilles-between-the-glass PEL-N with applied grilles PEL-N " NaturalSun Low-E IG PEL-N argon with grilles-between-the-glass PEL-N with applied grilles PEL-N " NaturalSun Low-E IG PEL-N argon with grilles-between-the-glass PEL-N with applied grilles PEL-N " NaturalSun Low-E IG PEL-N argon with grilles-between-the-glass PEL-N with applied grilles PEL-N " NaturalSun Low-E IG PEL-N argon with grilles-between-the-glass PEL-N with applied grilles PEL-N Rev. 03/15/2018 F2-FFDS-5

6 GLAZING PERFRMANCE - TTAL UNIT Fixed Frame Direct Set Glass Thickness Type of Glazing R-Value = 1/U-Factor SHGC = Solar Heat Gain Coefficient VLT % = Visible Light Transmission CR = Condensation Resistance ER = Canadian Energy Rating NFRC Certified Product # Glass (mm) Ext. Int. Gap Fill U-Factor Performance Values 1 SHGC VLT CR Shaded Areas Meet ENERGY STAR Performance Criteria in Zones Shown U. S. Canada 2 Zone ER Zone FIXED UNITS WITH FAM INSULATIN N NC SC S " Advanced Low-E IG PEL-N argon with grilles-between-the-glass PEL-N with applied grilles PEL-N " Advanced Low-E IG PEL-N argon with grilles-between-the-glass PEL-N with applied grilles PEL-N " Advanced Low-E IG PEL-N argon with grilles-between-the-glass PEL-N with applied grilles PEL-N " Advanced Low-E IG PEL-N argon with grilles-between-the-glass PEL-N with applied grilles PEL-N " SunDefense IG PEL-N argon with grilles-between-the-glass PEL-N with applied grilles PEL-N " SunDefense IG PEL-N argon with grilles-between-the-glass PEL-N with applied grilles PEL-N " SunDefense IG PEL-N argon with grilles-between-the-glass PEL-N with applied grilles PEL-N " SunDefense IG PEL-N argon with grilles-between-the-glass PEL-N with applied grilles PEL-N " AdvancedComfort Low-E IG PEL-N argon with grilles-between-the-glass PEL-N with applied grilles PEL-N " AdvancedComfort Low-E IG PEL-N argon with grilles-between-the-glass PEL-N with applied grilles PEL-N " AdvancedComfort Low-E IG PEL-N argon with grilles-between-the-glass PEL-N with applied grilles PEL-N " AdvancedComfort Low-E IG PEL-N argon with grilles-between-the-glass PEL-N with applied grilles PEL-N " NaturalSun Low-E IG PEL-N argon with grilles-between-the-glass PEL-N with applied grilles PEL-N " NaturalSun Low-E IG PEL-N argon with grilles-between-the-glass PEL-N with applied grilles PEL-N " NaturalSun Low-E IG PEL-N argon with grilles-between-the-glass PEL-N with applied grilles PEL-N " NaturalSun Low-E IG PEL-N argon with grilles-between-the-glass PEL-N with applied grilles PEL-N Climate Zones (1) Glazing performance values are calculated based on NFRC 100, NFRC 200 and NFRC 500. ENERGY STAR values are updated to 2016 (Version 6) criteria. (2) The values shown are based on Canada's updated ENERGY STAR 2015 initiative. For center-glass values, see the Product Performance section. See the Product Performance section for more detailed information or visit for Energy Star guidelines. Rev. 03/15/2018 F2-FFDS-6

7 GLAZING PERFRMANCE - TTAL UNIT High Altitude Glazing Glass Thickness Type of Glazing NFRC Certified Product # Glass (mm) Ext. Int. Gap Fill U-Factor Performance Values 1 SHGC VLT CR Shaded Areas Meet ENERGY STAR Performance Criteria in Zones Shown U. S. Canada 2 Zone ER Zone HIGH ALTITUDE GLAZING N NC SC S " (HA) Advanced Low-E IG PEL-N air with grilles-between-the-glass PEL-N with applied grilles PEL-N " (HA) Advanced Low-E IG PEL-N air with grilles-between-the-glass PEL-N with applied grilles PEL-N " (HA) Advanced Low-E IG PEL-N air with grilles-between-the-glass PEL-N with applied grilles PEL-N " (HA) Advanced Low-E IG PEL-N air with grilles-between-the-glass PEL-N with applied grilles PEL-N " (HA) SunDefense IG PEL-N air with grilles-between-the-glass PEL-N with applied grilles PEL-N " (HA) SunDefense IG PEL-N air with grilles-between-the-glass PEL-N with applied grilles PEL-N " (HA) SunDefense IG PEL-N air with grilles-between-the-glass PEL-N with applied grilles PEL-N " (HA) SunDefense IG PEL-N air with grilles-between-the-glass PEL-N with applied grilles PEL-N " (HA) AdvancedComfort Low-E IG PEL-N air with grilles-between-the-glass PEL-N with applied grilles PEL-N " (HA) AdvancedComfort Low-E IG PEL-N air with grilles-between-the-glass PEL-N with applied grilles PEL-N " (HA) AdvancedComfort Low-E IG PEL-N air with grilles-between-the-glass PEL-N with applied grilles PEL-N " (HA) AdvancedComfort Low-E IG PEL-N air with grilles-between-the-glass PEL-N with applied grilles PEL-N " (HA) NaturalSun Low-E IG PEL-N air with grilles-between-the-glass PEL-N with applied grilles PEL-N " (HA) NaturalSun Low-E IG PEL-N air with grilles-between-the-glass PEL-N with applied grilles PEL-N " (HA) NaturalSun Low-E IG PEL-N air with grilles-between-the-glass PEL-N with applied grilles PEL-N " (HA) NaturalSun Low-E IG PEL-N air with grilles-between-the-glass PEL-N with applied grilles PEL-N R-Value = 1/U-Factor SHGC = Solar Heat Gain Coefficient VLT % = Visible Light Transmission CR = Condensation Resistance ER = Canadian Energy Rating Climate Zones (1) Glazing performance values are calculated based on NFRC 100, NFRC 200 and NFRC 500. ENERGY STAR values are updated to 2016 (Version 6) criteria. (2) The values shown are based on Canada's updated ENERGY STAR 2015 initiative. For center-glass values, see the Product Performance section. See the Product Performance section for more detailed information or visit for Energy Star guidelines. Rev. 03/15/2018 F2-FFDS-7

8 GLAZING PERFRMANCE - TTAL UNIT High Altitude Glazing Glass Thickness Type of Glazing NFRC Certified Product # Glass (mm) Ext. Int. Gap Fill U-Factor Performance Values 1 SHGC VLT CR Shaded Areas Meet ENERGY STAR Performance Criteria in Zones Shown U. S. Canada 2 Zone ER Zone HIGH ALTITUDE GLAZING WITH FAM INSULATIN N NC SC S " (HA) Advanced Low-E IG PEL-N air with grilles-between-the-glass PEL-N with applied grilles PEL-N " (HA) Advanced Low-E IG PEL-N air with grilles-between-the-glass PEL-N with applied grilles PEL-N " (HA) Advanced Low-E IG PEL-N air with grilles-between-the-glass PEL-N with applied grilles PEL-N " (HA) Advanced Low-E IG PEL-N air with grilles-between-the-glass PEL-N with applied grilles PEL-N " (HA) SunDefense IG PEL-N air with grilles-between-the-glass PEL-N with applied grilles PEL-N " (HA) SunDefense IG PEL-N air with grilles-between-the-glass PEL-N with applied grilles PEL-N " (HA) SunDefense IG PEL-N air with grilles-between-the-glass PEL-N with applied grilles PEL-N " (HA) SunDefense IG PEL-N air with grilles-between-the-glass PEL-N with applied grilles PEL-N " (HA) AdvancedComfort Low-E IG PEL-N air with grilles-between-the-glass PEL-N with applied grilles PEL-N " (HA) AdvancedComfort Low-E IG PEL-N air with grilles-between-the-glass PEL-N with applied grilles PEL-N " (HA) AdvancedComfort Low-E IG PEL-N air with grilles-between-the-glass PEL-N with applied grilles PEL-N " (HA) AdvancedComfort Low-E IG PEL-N air with grilles-between-the-glass PEL-N with applied grilles PEL-N " (HA) NaturalSun Low-E IG PEL-N air with grilles-between-the-glass PEL-N with applied grilles PEL-N " (HA) NaturalSun Low-E IG PEL-N air with grilles-between-the-glass PEL-N with applied grilles PEL-N " (HA) NaturalSun Low-E IG PEL-N air with grilles-between-the-glass PEL-N with applied grilles PEL-N " (HA) NaturalSun Low-E IG PEL-N air with grilles-between-the-glass PEL-N with applied grilles PEL-N R-Value = 1/U-Factor SHGC = Solar Heat Gain Coefficient VLT % = Visible Light Transmission CR = Condensation Resistance ER = Canadian Energy Rating Climate Zones (1) Glazing performance values are calculated based on NFRC 100, NFRC 200 and NFRC 500. ENERGY STAR values are updated to 2016 (Version 6) criteria. (2) The values shown are based on Canada's updated ENERGY STAR 2015 initiative. For center-glass values, see the Product Performance section. See the Product Performance section for more detailed information or visit for Energy Star guidelines. Rev. 03/15/2018 F2-FFDS-8

9 GRILLE TYPES Typical Grilles Profiles Typical Grille Patterns Grille Profiles GRILLES-BETWEEN-THE-GLASS APPLIED GRILLES 3/4" 1 5/8" 3/4" Contoured 1-5/8" Applied Grille Patterns GRILLES-BETWEEN-THE-GLASS (1) Standard corner lite dimension for Prairie patterns = 4" visible glass (VG). (2) Standard visible glass to center line of separator bar = 14" or half of total VGH, whichever is smaller. Multiple rows are available up to 50% glass size. Traditional 9-Lite Prairie 1 Top Row 2 APPLIED GRILLES (T SIMULATE MULTIPLE UNIT CMPSITES) Equally Divided - Select up to 4 lites wide or high 4 x 4 2 x 2 1 x 2 2 x 1 2 x 2 2 x 2 2 x 3 3 x 1 Unequally Divided - Custom Specify - select up to 3 lites wide or high 3 x 2 3 x 3 3 x 2 Top Row - Select desired number of lites wide. Horizontal bar height is variable up to 50% glass size. 4 x 1 3 x 1 2 x 1 The above are examples only. F2-FFDS-9

10 CMPSITE ASSEMBLIES Parameters Frame Dimension A composite is a window or door consisting of two or more sashes or panels within a single frame utilizing an integral mullion. For complete information see the product details later in this section. SINGLE UNIT 2-WIDE CMPSITE WITH INTEGRAL MULLIN 3-WIDE CMPSITE WITH INTEGRAL MULLIN MINIMUM 11-1/2" W x 11-1/2" H (292 x 292) MAXIMUM 9' 4" (2 743) in any one direction 50 Ft² Maximum 2-HIGH CMPSITE WITH INTEGRAL MULLIN MINIMUM 1' 11-1/2" W x 11-1/2" H (597 x 292) MAXIMUM 11' 11-1/2" W or 6' 11-1/2" H (3 645 x 2 121) 50 Ft² Maximum 3-HIGH CMPSITE WITH INTEGRAL MULLIN MINIMUM 2' 11-1/2" W x 11-1/2" H (902 x 292) MAXIMUM 11' 11-1/2" W or 6' 11-1/2" H (3 645 x 2 121) in any one direction 50 Ft² Maximum General Notes: To convert areas to square meters (m2), multiply square feet by Rough pening = Frame Dimension + 1/2". Keep frame di men sions to the near est 1/8" increment MINIMUM 11-1/2" W x 1' 11-1/2" H (292 x 597) MAXIMUM 6' 11-1/2" W or 11' 11-1/2" H (2 121 x 3 645) 50 Ft² Maximum MINIMUM 11-1/2" W x 2' 11-1/2" H (292 x 902) MAXIMUM 6' 11-1/2" W or 11' 11-1/2" H (2 121 x 3 645) 50 Ft² Maximum Miscellaneous Glass Formulas ACTUAL GLASS VISIBLE GLASS Width Height Width Height SINGLE UNITS Frame Width 2" Frame Height 2" Frame Width 3-1/4" Frame Height 3-1/4" Note: Composite units with Integral Mullions are not AAMA/WDMA performance certified Pella Impervia composites are engineered to meet the performance class and grade shown in the Design Data tables. When ordering and sizing composites, use overall frame / rough opening dimension. F2-FFDS-10

11 CMPSITE CNFIGURATINS Special Size Chart 2- and 3-Wide 2 2-Wide Fixed Frame with Integral Mullion 2-Wide Fixed Frame Direct Set Dimensions PENING WIDTH PENING HEIGHT FRAME WIDTH FRAME HEIGHT Minimum Maximum Minimum Maximum Minimum Maximum Minimum Maximum VERALL CMPSITE 1 2' 12' 1' 7' 1' 11-1/2" 11' 11-1/2" 11-1/2" 6' 11-1/2" 2 3-Wide Fixed Frame with Integral Mullion 3-Wide Fixed Frame Direct Set Dimensions PENING WIDTH PENING HEIGHT FRAME WIDTH FRAME HEIGHT Minimum Maximum Minimum Maximum Minimum Maximum Minimum Maximum VERALL CMPSITE 1 3' 12' 1' 7' 2' 11-1/2" 11' 11-1/2" 11-1/2" 6' 11-1/2" (1) Keep frame dimensions to nearest 1/8" increments. Check mullion reinforcing tables in this section to determine design pressure limitation of integral mullion for desired frame sizes. See the Combinations section for structural limitations when mulling combinations. Maximum composite frame size should be no more than 50 sq. ft. Composite units are not AAMA / WDMA performance certified. Pella Impervia composites are engineered to meet performance class and grade shown in the design data tables. When ordering and sizing composites, use overall frame / rough opening dimension. F2-FFDS-11

12 CMPSITE CNFIGURATINS Special Size Chart 2- and 3-High 2 2-High Fixed with Integral Mullion 2-High Fixed Frame Direct Set Dimensions PENING WIDTH PENING HEIGHT FRAME WIDTH FRAME HEIGHT Minimum Maximum Minimum Maximum Minimum Maximum Minimum Maximum VERALL CMPSITE 1 1' 7' 2' 12' 11-1/2" 6' 11-1/2" 1' 11-1/2" 11' 11-1/2" 2 3-High Fixed with Integral Mullion 3-High Fixed Frame Direct Set Dimensions PENING WIDTH PENING HEIGHT FRAME WIDTH FRAME HEIGHT Minimum Maximum Minimum Maximum Minimum Maximum Minimum Maximum VERALL CMPSITE 1 1' 7' 3' 12' 11-1/2" 6' 11-1/2" 2' 11-1/2" 11' 11-1/2" (1) Keep frame dimensions to nearest 1/8" increments. Check mullion reinforcing tables in this section to determine design pressure limitation of integral mullion for desired frame sizes. See the Combinations section for structural limitations when mulling combinations. Maximum composite frame size should be no more than 50 sq. ft. Composite units are not AAMA / WDMA performance certified. Pella Impervia composites are engineered to meet performance class and grade shown in the design data tables. When ordering and sizing composites, use overall frame / rough opening dimension. F2-FFDS-12

13 DESIGN DATA Integral Mullion L (IN) W (IN) DESIGN PRESSURE (PSF) A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A B A A A A A A A A A A A A A A B A B B A B B A A A A A A A A A A A B A B B A B B B B B A A A A A A A A A A A B A B B B B B B B B B B B A A A A A A A B B B B B B B B B B B B B B A A A A A B B B B B B B B B B B B B L (IN) W (IN) DESIGN PRESSURE (PSF) A A A A B B B B B B B B B B B B B A A B B B B B B B B B B B B B B A B B B B B B B B B B B B B B B B B B B B B 2-Wide 2-High 3-Wide 3-High ( ) = Not Available Composite units are not AAMA / WDMA performance certified. Pella Impervia composites are engineered to meet performance class and grade shown. See the Combinations section to determine if reinforcing mullion is needed when mulling multiple composites into a combination. (1) Maximum performance when glazed with the appropriate glass thickness. F2-FFDS-13

14 DETAILED PRDUCT DESCRIPTINS FRAME Frame is Duracast fiberglass composite five-layer pultruded fiberglass material [with optional foam insulation 1], reinforced with a Pella patented interlocking mat. verall frame depth is 3". Nominal wall thickness of Duracast fiberglass composite members is.050" to.070" thick. Frame corners are mitered, joined and bonded with corner lock and mechanically fastened with injected polyurethane adhesive. Jambs contain optional factory-drilled (counter-bored) installation screw holes. EXTERIR / INTERIR Duracast fiberglass composite surfaces with powder-coat paint finish. Color is [White] [Tan] [Brown] [Black] [Morning Sky Gray]. - or - Dual-color option [Tan] [Brown] [Black] [Morning Sky Gray] exterior with White interior. GLAZING SYSTEM Quality float glass complying with ASTM C " insulating glass [[annealed] [tempered]] [obscure 2] [[clear] [Advanced] [SunDefense ] [AdvancedComfort] [NaturalSun] Low-E coated, with argon]] sealed and bonded to frame. High altitude glazing [with argon] available. pen glaze also available frame and stops only. PTINAL PRDUCTS Grilles Grilles-Between-the-Glass Insulating glass contains 3/4" contoured aluminum grilles permanently installed between two panes of glass. Grilles are factory pre-finished [White] [Tan] [Brown] [Black] [Morning Sky Gray]. Interior and Exterior Applied grilles 1-5/8" aluminum grilles are applied to the interior and exterior of glass. Grilles are factory pre-finished [White] [Tan] [Brown] [Black] [Morning Sky Gray]. FAM INSULATIN INSERTS 1 (1) Foam insulation inserts are not available with clear glazing. (2) bscure glazing is not available when AdvancedComfort Low-E coated IG is specified. F2-FFDS-14

15 UNIT SECTINS Block Frame TYPICAL JINING MULLINS Scale 3" = 1' 0" All dimensions are approximate. Factory-assembled integral mullions have a 3" overall frame width. Combination joining mullions are 3-1/4" frame width. See the Installation and Performance section at PellaADM.com for mullion applications and structural limitations. F2-FFDS-15

16 UNIT SECTINS Block Frame Composite with Integral Mullion Scale 3" = 1' 0" All dimensions are approximate. Factory-assembled integral mullions have a 3" overall frame width. Combination joining mullions are 3-1/4" frame width. See the Installation and Performance section at for mullion applications and structural limitations. F2-FFDS-16