Architect Series Traditional

Transcription

1 SECTION DIRECTORY Architect Series Traditional Product Selection Guide Size and Performance Data...W-HG-2 STC/OITC...W-HG-2 Features and Options...W-HG-3 Combination Assemblies...W-HG-4 Glazing Performance...W-HG-6 HurricaneShield Products with Impact-Resistant Glazing...W-HG-9 Grille Types Grille Profiles...W-HG-10 Grille Patterns...W-HG-11 Custom Shapes...W-HG-11 Size Tables for Double- and Single-Hung...W-HG-12 Cottage Sash Units...W-HG-15 Replacement Units...W-HG-16 Design Data Special Sizes and Miscellaneous Formulas...W-HG-20 Luxury Edition (LX) and Style Edition (SE)...W-HG-21 Replacement Units...W-HG-26 Detailed Product Descriptions Clad Exterior LX and SE Double-, Single- and Simulated-Hung...W-HG-31 Wood Exterior LX Double-, Single and Simulated Hung...W-HG-32 Unit Sections / Typical Joining Mullions Double-Hung Clad LX...W-HG-33 Double-, and Single-Hung Clad LX...W-HG-34 Double-Hung Clad SE...W-HG-35 Fixed and Transoms...W-HG-36 Double- and Single-Hung Wood LX...W-HG-37 The information published in this document is believed to be accurate at the time of publication. However, because we are constantly working to improve our products, specifications are subject to change without notice. Consult your local Pella representative for up-to-date product information. W-HG-1

2 PRODUCT SELECTION GUIDE Size and Performance Data Sound Transmission Class / OITC SIZES Clad LX Wood LX Clad SE Standard double-hung vent / fixed sizes Transom sizes Egress sizes Single-hung Simulated-hung Single-hung arch head Cottage sash split Variable sash split Special sizes available PERFORMANCE 1 Meets or Exceeds AAMA / WDMA Ratings H-CW30 - CW50 Hallmark Certified H-CW30 - CW45 Hallmark Certified H-CW30 - CW50 Hallmark Certified Air Infiltration (cfm / ft 2 of 1.57 psf wind pressure) Water Resistance psf psf psf Design Pressure psf psf psf HurricaneShield Products with Impact-resistant Glass OTHER PERFORMANCE CRITERIA CW 60 Hallmark Certified Forced Entry Resistance Level (Minimum Security Grade) Operating Force (lb) Initiate Motion / Maintain Motion (of Hallmark tested size and glazing) 4 40/45 40/45 40/45 SOUND TRANSMISSION CLASS / OUTDOOR-INDOOR TRANSMISSION CLASS Glazing System Product Frame Size Tested 5 Overall Glazing Thickness Exterior Glass Thickness Interior Glass Thickness Third Pane Thickness STC Rating OITC Rating ARCHITECT SERIES WOOD LX WINDOW ARCHITECT SERIES CLAD LX OR SE WINDOW WITH INTEGRAL GRILLES 45" x 65" 11/16" 2.5mm 2.5mm " x 65" 11/16" 3mm 6mm Laminated WITH REMOVABLE OR NO GRILLES 45" x 65" 11/16" 2.5mm 2.5mm " x 65" 11/16" 3mm 3mm WITH INTEGRAL GRILLES 45" x 65" 11/16" 2.5mm 2.5mm " x 65" 11/16" 3mm 3mm " x 65" 11/16" 3mm 5mm " x 65" 11/16" 3mm 6mm Laminated WITH REMOVABLE OR NO GRILLES 45" x 65" 11/16" 2.5mm 2.5mm " x 65" 11/16" 3mm 3mm " x 65" 11/16" 3mm 5mm " x 65" 11/16" 3mm 6mm Laminated ( ) = Not Available (1) Maximum performance for single unit when glazed with the appropriate glass thickness. See Design Data pages in this section for specific product performance class and grade values. (2) Published performance data for air infiltration is determined by testing a minimum of four (4) products of NFRC model size. Testing is conducted in accordance with ASTM E283. Air infiltration ratings for products will differ by size. The performance data does not apply to combination assemblies unless noted. Actual product performance may vary for a number of reasons including installation and product care. (3) The higher the level, the greater the product s ability to resist forced entry. (4) Glazing configurations may result in higher operational forces (5) ASTM E 1425 defines standard sizes for acoustical testing. Ratings achieved at that size are representative of all sizes of the same configuration. Rev. 09/29/2017 W-HG-2

3 PRODUCT SELECTION GUIDE Features and Options STANDARD GLAZING Glazing Type Dual-Pane Insulating Glass Insulated Glass Options/Low-E Types SunDefense Low-E AdvancedComfort Low-E Advanced Low-E NaturalSun Low-E Clear (no Low-E coating) Additional Glass Options Tempered Glass OPTIONS / UPGRADES Annealed Glass Gas Fill/High Altitude Argon WOOD TYPES Pine Obscure Glass 1 Tinted Glass (Bronze, Gray and Green) HurricaneShield Products with Impact-Resistant Glass (Laminated Dual-Pane Insulating Glass 2) High altitude Mahogany (clad and wood LX only), Douglas Fir (clad LX only) EXTERIOR 1 EnduraClad protective finish INTERIOR Unfinished Wood HARDWARE Hardware Finish Champagne, White, Brown or Matte Black Sash Locks Cam-action lock Tilt-Wash Cleaning Tilt to interior on both sashes Other Hardware Sash lifts GRILLES Integral Light Technology Grilles EnduraClad Plus protective finish Factory Primed Pine wood exterior Unfinished Mahogany wood exterior Factory primed 3, Factory prefinished paint 3, Factory prefinished stain Bright Brass, Satin Nickel, Oil Rubbed Bronze, Antique Brass, Distressed Bronze, Distressed Nickel Simulated lock, Air conditioner lock, Historical spoon-style lock (surface mounted) Traditional, Prairie, Top Row, Cross, New England, Victorian, Diamond, Custom Roomside Removable Grilles Traditional, Prairie, Custom Grilles-Between-the-Glass Traditional, Prairie, Top Row 1, Cross or Custom-Equally Divided SCREENS Full-Height or Half-height InView screens or Vivid View screens (1) Contact your local Pella sales representative for current color options. (2) Low-E coatings are limited on Laminated Glass, see detailed product description or glazing performance for full details. (3) Not available on Mahogany and Douglas Fir interiors. W-HG-3

4 COMBINATION ASSEMBLIES Rectangular Units Combinations are a great way to create visual interest in any project. A combination is an assembly formed by two or more separate windows or doors whose frames are mulled together by a combination or reinforcing mullion. Pella window combinations are available in an endless variety of arrangements. Below are available factory-assembled combinations. Some units can be fixed or vent depending on availability. Refer to Clad / Wood Overview Section for typical combinations requirements, and limitations related to mulling various combinations. Contact your local Pella sales representative for more information. Click to view Clad-Wood Combinations Sections Combination Recommendations Downloadable PDF. Combination Size Tables Downloadable PDF. W-HG-4

5 COMBINATION ASSEMBLIES Arch Top Units Combinations are a great way to create visual interest in any project. A combination is an assembly formed by two or more separate windows or doors whose frames are mulled together by a combination or reinforcing mullion. Pella window combinations are available in an endless variety of arrangements. Below are available factory-assembled combinations. Some units can be fixed or vent depending on availability. Series. Refer to Clad / Wood Overview Section for typical combinations requirements, and limitations related to mulling various combinations. Contact your local Pella sales representative for more information. Refer to Clad / Wood Overview Section for standard size range charts. Click to view Clad-Wood Combinations Sections Combination Recommendations Downloadable PDF. Combination Size Tables Downloadable PDF. W-HG-5

6 GLAZING PERFORMANCE - TOTAL UNIT Aluminum-Clad Exterior Glazing Thickness Type of Glazing NFRC Certified Product # Ext. Glass (mm) Int. Gap Fill U-Factor Performance Values1 SHGC VLT CR Shaded Areas Meet ENERGY STAR Performance Criteria in Zones Shown U. S. Canada 2 Zone ER Zone VENT N NC SC S /16" Clear IG PEL-N air with grilles-between-the-glass PEL-N with integral grilles PEL-N /16" Advanced Low-E IG PEL-N argon with grilles-between-the-glass PEL-N with integral grilles PEL-N /16" SunDefense Low-E IG PEL-N argon with grilles-between-the-glass PEL-N with integral grilles PEL-N /16" AdvancedComfort Low-E IG PEL-N argon with grilles-between-the-glass PEL-N with integral grilles PEL-N /16" NaturalSun Low-E IG PEL-N argon with grilles-between-the-glass PEL-N with integral grilles PEL-N TINTED GLAZING 11/16" Bronze Advanced Low-E IG PEL-N argon with grilles-between-the-glass PEL-N with integral grilles PEL-N /16" Gray Advanced Low-E IG PEL-N argon with grilles-between-the-glass PEL-N with integral grilles PEL-N /16" Green Advanced Low-E IG PEL-N argon with grilles-between-the-glass PEL-N with integral grilles PEL-N HIGH ALTITUDE GLAZING 11/16" Advanced Low-E IG PEL-N air with grilles-between-the-glass PEL-N with integral grilles PEL-N /16" SunDefense Low-E IG PEL-N air with grilles-between-the-glass PEL-N with integral grilles PEL-N /16" AdvancedComfort Low-E IG PEL-N air with grilles-between-the-glass PEL-N with integral grilles PEL-N /16" NaturalSun Low-E IG PEL-N air with grilles-between-the-glass PEL-N with integral grilles PEL-N R-Value = 1/U-Factor SHGC = Solar Heat Gain Coefficient VLT % = Visible Light Transmission CR = Condensation Resistance ER = Canadian Energy Rating Climate Zones (1) Glazing performance values are calculated for Pine using NFRC 100, NFRC 200 and NFRC 500. Thermal performance of other wood species may vary. ENERGY STAR values are updated to 2016 (Version 6) criteria. (2) The values shown are based on Canada's updated ENERGY STAR 2015 initiative. See the Product Performance section for more detailed information or visit for Energy Star guidelines. Non Rectangular Unit thermal values will vary slightly. W-HG-6

7 GLAZING PERFORMANCE - TOTAL UNIT Wood Exterior Glazing Thickness Type of Glazing NFRC Certified Product # Ext. Glass (mm) Int. Gap Fill U-Factor Performance Values1 SHGC VLT CR Shaded Areas Meet ENERGY STAR Performance Criteria in Zones Shown U. S. Canada 2 Zone ER Zone VENT N NC SC S /16" Clear IG PEL-N air with grilles-between-the-glass PEL-N with integral grilles PEL-N /16" Advanced Low-E IG PEL-N argon with grilles-between-the-glass PEL-N with integral grilles PEL-N /16" SunDefense Low-E IG PEL-N argon with grilles-between-the-glass PEL-N with integral grilles PEL-N /16" AdvancedComfort Low-E IG PEL-N argon with grilles-between-the-glass PEL-N with integral grilles PEL-N /16" NaturalSun Low-E IG PEL-N argon with grilles-between-the-glass PEL-N with integral grilles PEL-N TINTED GLAZING 11/16" Bronze Advanced Low-E IG PEL-N argon with grilles-between-the-glass PEL-N with integral grilles PEL-N /16" Gray Advanced Low-E IG PEL-N argon with grilles-between-the-glass PEL-N with integral grilles PEL-N /16" Green Advanced Low-E IG PEL-N argon with grilles-between-the-glass PEL-N with integral grilles PEL-N HIGH ALTITUDE GLAZING 11/16" Advanced Low-E IG PEL-N air with grilles-between-the-glass PEL-N with integral grilles PEL-N /16" SunDefense Low-E IG PEL-N air with grilles-between-the-glass PEL-N with integral grilles PEL-N /16" AdvancedComfort Low-E IG PEL-N air with grilles-between-the-glass PEL-N with integral grilles PEL-N /16" NaturalSun Low-E IG PEL-N air with grilles-between-the-glass PEL-N with integral grilles PEL-N R-Value = 1/U-Factor SHGC = Solar Heat Gain Coefficient VLT % = Visible Light Transmission CR = Condensation Resistance ER = Canadian Energy Rating Climate Zones (1) Glazing performance values are calculated for Pine using NFRC 100, NFRC 200 and NFRC 500. Thermal performance of other wood species may vary. ENERGY STAR values are updated to 2016 (Version 6) criteria. (2) The values shown are based on Canada's updated ENERGY STAR 2015 initiative. See the Product Performance section for more detailed information or visit for Energy Star guidelines. Non Rectangular Unit thermal values will vary slightly. W-HG-7

8 GLAZING PERFORMANCE - TOTAL UNIT Aluminum-Clad Exterior HurricaneShield Impact-Resistant Glass Glazing Thickness Type of Glazing NFRC Certified Product # Ext. Glass (mm) Int. Gap Fill U-Factor Performance Values1 SHGC VLT CR Shaded Areas Meet ENERGY STAR Performance Criteria in Zones Shown U. S. Canada 2 Zone ER Zone HURRICANESHIELD LAMINATED IMPACT-RESISTANT N NC SC S /16" Clear IG PEL-N air with grilles-between-the-glass PEL-N with integral grilles PEL-N /16" Advanced Low-E IG PEL-N argon with grilles-between-the-glass PEL-N with integral grilles PEL-N /16" SunDefense Low-E IG PEL-N argon with grilles-between-the-glass PEL-N with integral grilles PEL-N TINTED GLAZING 13/16" Bronze Advanced Low-E IG PEL-N argon with grilles-between-the-glass PEL-N with integral grilles PEL-N /16" Gray Advanced Low-E IG PEL-N argon with grilles-between-the-glass PEL-N with integral grilles PEL-N /16" Green Advanced Low-E IG PEL-N argon with grilles-between-the-glass PEL-N with integral grilles PEL-N R-Value = 1/U-Factor SHGC = Solar Heat Gain Coefficient VLT % = Visible Light Transmission CR = Condensation Resistance ER = Canadian Energy Rating Climate Zones (1) Glazing performance values are calculated for Pine using NFRC 100, NFRC 200 and NFRC 500. Thermal performance of other wood species may vary. ENERGY STAR values are updated to 2016 (Version 6) criteria. (2) The values shown are based on Canada's updated ENERGY STAR 2015 initiative. See the Product Performance section for more detailed information or visit for Energy Star guidelines. W-HG-8

9 HURRICANESHIELD PRODUCTS WITH IMPACT-RESISTANT GLASS 7/8" Laminated Insulated Glass Aluminum-Clad Exterior For a complete list of ratings, refer to the Coastal and High Winds section. Material Design Pressure Large Missile Rating D Minimum Maximum Hallmark Certified Florida Product Approval System PVB 1 Clad +50 / / H-1478 FL17769 H 5 7/8" [149] UJ CR 3 5/8" [92] 2 1/8" [55] 1 3/16" [31] 2 1/4" [57] 3 1/2" [89] 2 1/4" [57] 2 1/4" [57] 1 5/16" [33] 1 9/16" [39] 3 13/16" [96] [47] 1 7/8" [47] Dimension required for ordering units with unequal sash. 1 5/16" [33] 4 9/16" [116] 1 1/4" [32] LJ H HEAD S CR CHECK RAIL 3 13/16" [96] [47] 1 7/8" [47] FRAME HEIGHT 5 7/8" [149] S SILL CHECKRAIL HEIGHT UJ UPPER JAMBS FRAME WIDTH 1 1/4" [32] 2 1/4" [57] Optional Fold-out Installation Fin 2 3/16" [56] LJ LOWER JAMBS 1 1/4" [32] FRAME WIDTH (1) All impact sizes and glass types are certified for wind zone 3, large missile rating D. Not approved for use in Miami-Dade County. Click to view Clad-Wood HurricaneShield Section Double-Hung HurricaneShield Downloadable PDF. W-HG-9

10 GRILLE TYPES Typical Grille Profiles Architect Series Traditional Integral Light Technology Putty and Ogee Glaze Grilles Clad Exterior - Wood Interior Putty and Ogee Glaze Grilles Wood Exterior - Wood Interior 5/8" 7/8" 1 1/4" 5/8" 7/8" 1 1/4" 5/8" 7/8" 1 1/4" 5/8" 7/8" 1 1/4" 5/8" ILT 7/8" ILT 1 1/4" ILT Ogee Glaze Grilles Clad Exterior - Wood Interior 5/8" ILT 7/8" ILT 1 1/4" ILT Contoured Aluminum - Grilles-Between-the-Glass 7/8" 1 1/4" 2" 3/4" 3/4" 3/4" Contoured GBG 3/4" Contoured GBG 7/8" 1 1/4" 2" 7/8" ILT 1 1/4" ILT 2" ILT Removable Interior Pine Grilles 3/4" 1 1/4" 2" 1 1/4" 2" 3/4" Traditional RMB 1 1/4" Traditional RMB 2" Traditional RMB 1 1/4" Colonial RMB 2" Colonial RMB Interior wood ILT grilles available in Pine, Mahogany or Douglas Fir to match complete unit. Exterior wood ILT grilles available in Pine or Mahogany to match complete unit. W-HG-10

11 GRILLE TYPES Typical Grille Patterns Architect Series Traditional Integral light technology Grilles and Roomside Removable Grilles PRAIRIE LITE PATTERNS Standard corner lite dimension for Prairie patterns = 2-1/2" VG. Available in transoms 1'3" height and width. Available in all standard and special sizes. OTHER AVAILABLE PATTERNS VG = Visible Glass Lite dimensions noted can vary. For size and pattern availability contact your local Pella sales representative. Grilles-Between-the-Glass Prairie - Standard corner lite dimension for Prairie patterns = 2-1/2" VG. - Available in transoms 1'3" height and width. Cross - Minimum DH frame height 35". - Horizontal bar will be at 1/2" of the VG height of the top sash. Top Row - Minimum DH frame height 35". - Horizontal bar will be at 1/2" of the VG height of the top sash. For traditional patterns, see size tables. CUSTOM SHAPES Pella Architect Series single-hung windows are available in custom shapes shown below, and additional shapes per drawing. For specifications, size limitations, and details on these units, contact your local Pella sales representative. W-HG-11

12 SIZE TABLES Wood and Aluminum-Clad Exteriors Double- and Single-Hung Left Right Springline Arch Head Partial Arch Head Pella Architect Series single-hung windows are available in shapes shown above, and additional custom shapes per drawing. For specifications, size limitations, and details on these units, contact your local Pella sales representative. Opening Dimensions CLAD EXTERIOR UNITS: Dimensions shown in standard size tables are rough opening dimensions. WOOD EXTERIOR UNITS: Use frame dimension plus dimensions below. This dimension includes the use of standard 1-1/8" wood subsill. FRAME ROUGH MASONRY Brickmould Width Height Width Height STD + 3/4" +1-7/8" + 3-1/8" + 3-1/8" 3-1/2" + 3/4" +1-7/8" + 6-3/8" + 4-3/4" For clad and wood units with HurricaneShield impact-resistant glass, see the product installation instructions or refer to local building code requirements. Egress Notes: Check all applicable local codes for emergency egress requirements. E = Window meets minimum clear opening of 24" height, 20" width, and 5.7 ft 2. E1 = Window meets minimum clear opening of 24" height, 20" width, and 5.0 ft 2. See Design Data pages in this section for clear opening dimensions. Clear opening (egress) information does not take into consideration the addition of a Rolscreen (or any other accessory) to the product. You should consult your local building code to ensure products with Rolscreens meet egress requirements. Not to scale. Traditional grille patterns shown. Refer to Grille Types section for additional patterns and profiles. W-HG-12

13 SIZE TABLES Wood and Aluminum-Clad Exteriors Double- and Single-Hung Opening Dimensions CLAD EXTERIOR UNITS: Dimensions shown in standard size tables are rough opening dimensions. WOOD EXTERIOR UNITS: Use frame dimension plus dimensions below. This dimension includes the use of standard 1-1/8" wood subsill. FRAME ROUGH MASONRY Brickmould Width Height Width Height STD + 3/4" +1-7/8" + 3-1/8" + 3-1/8" 3-1/2" + 3/4" +1-7/8" + 6-3/8" + 4-3/4" For clad and wood units with HurricaneShield impact-resistant glass, see the product installation instructions or refer to local building code requirements. Egress Notes: Check all applicable local codes for emergency egress requirements. E = Window meets minimum clear opening of 24" height, 20" width, and 5.7 ft 2. E1 = Window meets minimum clear opening of 24" height, 20" width, and 5.0 ft 2. See Design Data pages in this section for clear opening dimensions. Clear opening (egress) information does not take into consideration the addition of a Rolscreen (or any other accessory) to the product. You should consult your local building code to ensure products with Rolscreens meet egress requirements. Not to scale. Traditional grille patterns shown. Refer to Grille Types section for additional patterns and profiles. W-HG-13

14 / Architect Series Traditional SIZE TABLES Wood and Aluminum-Clad Exteriors Double- and Single-Hung Fixed Fixed Units Opening 3' 5 3/ 4" 3' 11 3/ 4" 4' 5 3/4" 4' 11 3/ 4" Frame (1 060) (1 041) 3' 5" (1 213) (1 194) 3' 11" (1 365) (1 518) (1 346) (1 499) 4' 5" 4' 11" (908) (889) (1 365) (1 213) (1 060) (1 346) (1 194) (1 041) (1 467) (1 448) (1 518) (1 499) (1 670) (1 651) (1 822) (1 803) 3 4" 5' 5 3/4" 4' 11 3/ 4 " 4' 9 3/ 4" 4' 5 3/4" 3' 11 3/ 4 " 3' 5 3/ 4" 2' 11 3/ 4 " 5' 11 5' 11" 5' 5" 4' 11" 4' 9" 4' 5" 3' 11" 3' 5" 2' 11" Opening Dimensions CLAD EXTERIOR UNITS: Dimensions shown in standard size tables are rough opening dimensions. WOOD EXTERIOR UNITS: Use frame dimension plus dimensions below. This dimension includes the use of standard 1-1/8" wood subsill. FRAME ROUGH MASONRY Brickmould Width Height Width Height STD + 3/4" +1-7/8" + 3-1/8" + 3-1/8" 3-1/2" + 3/4" +1-7/8" + 6-3/8" + 4-3/4" For clad and wood units with HurricaneShield impact-resistant glass, see the product installation instructions or refer to local building code requirements. Not to scale. Traditional grille patterns shown. Refer to Grille Types section for additional patterns and profiles. Grille patterns will align with companion hung window with equal sash split. 5-lite high grille patterns may be ordered in 5'5" fixed units to match cottage sash vent units. Grilles are equally-divided on fixed units with odd-number lites high. W-HG-14

15 SIZE TABLES Wood and Aluminum-Clad Exteriors Cottage Sash Opening Dimensions CLAD EXTERIOR UNITS: Dimensions shown in standard size tables are rough opening dimensions. WOOD EXTERIOR UNITS: Use frame dimension plus dimensions below. This dimension includes the use of standard 1-1/8" wood subsill. FRAME ROUGH MASONRY Brickmould Width Height Width Height STD + 3/4" +1-7/8" + 3-1/8" + 3-1/8" 3-1/2" + 3/4" +1-7/8" + 6-3/8" + 4-3/4" For clad and wood units with HurricaneShield impact-resistant glass, see the product installation instructions or refer to local building code requirements. 6 Egress Notes: Check all applicable local codes for emergency egress requirements. E = Window meets minimum clear opening of 24" height, 20" width, and 5.7 ft 2. E1 = Window meets minimum clear opening of 24" height, 20" width, and 5.0 ft 2. See Design Data pages in this section for clear opening dimensions. Clear opening (egress) information does not take into consideration the addition of a Rolscreen (or any other accessory) to the product. You should consult your local building code to ensure products with Rolscreens meet egress requirements. Not to scale. Traditional grille patterns shown. Refer to Grille Types section for additional patterns and profiles. Cottage units have unequal sash split. Sash glass ratio is 40% upper sash to 60% Lower sash. Vent variable units have unequal sash split. Sash glass ratio is determined by checkrail heights. See unit sections for dimension requirements. W-HG-15

16 SIZE TABLES Wood and Aluminum-Clad Exteriors Replacement Double-Hung and Transoms Opening Dimensions CLAD EXTERIOR UNITS: Dimensions shown in standard size tables are rough opening dimensions. WOOD EXTERIOR UNITS: Use frame dimension plus dimensions below. This dimension includes the use of standard 1-1/8" wood subsill. FRAME ROUGH MASONRY Brickmould Width Height Width Height STD + 3/4" +1-7/8" + 3-1/8" + 3-1/8" 3-1/2" + 3/4" +1-7/8" + 6-3/8" + 4-3/4" For clad and wood units with HurricaneShield impact-resistant glass, see the product installation instructions or refer to local building code requirements. Egress Notes: Check all applicable local codes for emergency egress requirements. E = Window meets minimum clear opening of 24" height, 20" width, and 5.7 ft 2. E1 = Window meets minimum clear opening of 24" height, 20" width, and 5.0 ft 2. See Design Data pages in this section for clear opening dimensions. Clear opening (egress) information does not take into consideration the addition of a Rolscreen (or any other accessory) to the product. You should consult your local building code to ensure products with Rolscreens meet egress requirements. Not to scale. Traditional grille patterns shown. Refer to Grille Types section for additional patterns and profiles. W-HG-16

17 SIZE TABLES Wood and Aluminum-Clad Exteriors Replacement Double-Hung Opening Dimensions CLAD EXTERIOR UNITS: Dimensions shown in standard size tables are rough opening dimensions. WOOD EXTERIOR UNITS: Use frame dimension plus dimensions below. This dimension includes the use of standard 1-1/8" wood subsill. FRAME ROUGH MASONRY Brickmould Width Height Width Height STD + 3/4" +1-7/8" + 3-1/8" + 3-1/8" 3-1/2" + 3/4" +1-7/8" + 6-3/8" + 4-3/4" For clad and wood units with HurricaneShield impact-resistant glass, see the product installation instructions or refer to local building code requirements. Egress Notes: Check all applicable local codes for emergency egress requirements. E = Window meets minimum clear opening of 24" height, 20" width, and 5.7 ft 2. E1 = Window meets minimum clear opening of 24" height, 20" width, and 5.0 ft 2. See Design Data pages in this section for clear opening dimensions. Clear opening (egress) information does not take into consideration the addition of a Rolscreen (or any other accessory) to the product. You should consult your local building code to ensure products with Rolscreens meet egress requirements. Not to scale. Traditional grille patterns shown. Refer to Grille Types section for additional patterns and profiles. W-HG-17

18 SIZE TABLES Wood and Aluminum-Clad Exteriors Replacement Cottage Opening Dimensions CLAD EXTERIOR UNITS: Dimensions shown in standard size tables are rough opening dimensions. WOOD EXTERIOR UNITS: Use frame dimension plus dimensions below. This dimension includes the use of standard 1-1/8" wood subsill. FRAME ROUGH MASONRY Brickmould Width Height Width Height STD + 3/4" +1-7/8" + 3-1/8" + 3-1/8" 3-1/2" + 3/4" +1-7/8" + 6-3/8" + 4-3/4" For clad and wood units with HurricaneShield impact-resistant glass, see the product installation instructions or refer to local building code requirements. Egress Notes: Check all applicable local codes for emergency egress requirements. E = Window meets minimum clear opening of 24" height, 20" width, and 5.7 ft 2. E1 = Window meets minimum clear opening of 24" height, 20" width, and 5.0 ft 2. See Design Data pages in this section for clear opening dimensions. Clear opening (egress) information does not take into consideration the addition of a Rolscreen (or any other accessory) to the product. You should consult your local building code to ensure products with Rolscreens meet egress requirements. Not to scale. Traditional grille patterns shown. Refer to Grille Types section for additional patterns and profiles. W-HG-18

19 SIZE TABLES Wood and Aluminum-Clad Exteriors Replacement Fixed Units Not to scale. Traditional grille patterns shown. Refer to Grille Types section for additional patterns and profiles. W-HG-19

20 DESIGN DATA Special sizes Miscellaneous Formulas Equal Sash Only VISIBLE GLASS ACTUAL GLASS CLEAR OPENING* VENT UNITS Width = Frame 5-3/4" Height 2 = (Frame 8-3/16") / 2 Width = Frame 4-3/8" Height 2 = (Frame 5-1/2") / 2 COW = Frame Width 3-7/16" COH = (Frame Height / 2) - 4-7/16" FIXED AND TRANSOM UNITS Width = Frame 5-3/4" Height = Frame 5-3/4" Width = Frame 4-3/8" Height = Frame 4-3/8" VENT AREA FT 2 (COW x COH) / 144 Special Size Frame Dimension 1 SASH CONFIGURATION VENT-EQUAL COTTAGE FIXED SASH GLASS RATIO TOP % : BOTTOM % SHORTEST UNIT FRAME SIZE TALLEST UNIT FRAME SIZE 50 : : 60 NA 24-3/8" (889) 42-1/4" (1 073) 17" (432) 96" (2 438) 81" (2 057) 71" (1 803) UNIT FRAME WIDTH RANGE 14" to 48" (533 to 1 219) 21" to 48" (533 to 1 219) 17" to 59" (432 to 1 499) (1) Available within size range shown. (2) Per sash. * Some units with custom glazing may have limited travel. See your local Pella sales representative for specific size information. W-HG-20

21 DESIGN DATA LX and SE Aluminum-Clad Exterior LX Wood Exterior VENT EQUAL SASH UNITS FOR SINGLE- AND DOUBLE- Clear Opening Vent Area Standard Glass Performance (Inches) Ft 2 Visible Thickness (mm) Class & Grade 1 Unit Glass Width Height Clad Wood Ft 2 Clad Wood Annealed Tempered Clad Wood / / CW50 CW / / CW50 CW / / CW50 CW / / CW50 CW / / CW50 CW / / CW50 CW / / CW50 CW / / CW50 CW / / CW50 CW / / CW40 CW / / CW50 CW / / CW50 CW / / CW50 CW / / CW50 CW / / CW50 CW / / CW50 CW / / CW50 CW / / CW50 CW E1 21-9/ / CW50 CW E1 21-9/ / CW40 CW / / CW50 CW / / CW50 CW / / CW50 CW / / CW50 CW / / CW50 CW / / CW50 CW / / CW50 CW E1 25-9/ / CW50 CW E 25-9/ / CW50 CW E 25-9/ / CW40 CW / / CW50 CW / / CW50 CW / / CW50 CW / / CW50 CW / / CW50 CW E1 29-9/ / CW50 CW E 29-9/ / CW50 CW E 29-9/ / CW50 CW E 29-9/ / CW50 CW E 29-9/ / CW40 CW40 Egress Continued on next page Egress Notes: Check all applicable local codes for emergency egress requirements. E = Window meets minimum clear opening of 24" height, 20" width, and 5.7 ft 2. E1 = Window meets minimum clear opening of 24" height, 20" width, and 5.0 ft 2. (1) Maximum design pressure when glazed with appropriate glass thickness. To convert area to square meters (m²), multiply square feet by W-HG-21

22 DESIGN DATA LX and SE Aluminum-Clad Exterior LX Wood Exterior VENT EQUAL SASH UNITS FOR SINGLE- AND DOUBLE- Unit Egress Clear Opening (Inches) Vent Area Ft 2 Visible Standard Glass Thickness (mm) Performance Class & Grade 1 Glass Width Height Clad Wood Ft 2 Clad Wood Annealed Tempered Clad Wood / / CW50 CW / / CW50 CW / / CW50 CW / / CW50 CW E1 33-9/ / CW50 CW E 33-9/ / CW50 CW E 33-9/ / CW50 CW E 33-9/ / CW50 CW E 33-9/ / CW50 CW E 33-9/ / CW40 CW / / CW50 CW / / CW50 CW / / CW50 CW / / CW50 CW E 37-9/ / CW50 CW E 37-9/ / CW50 CW E 37-9/ / CW50 CW E 37-9/ / CW50 CW E 37-9/ / CW45 CW E 37-9/ / CW40 CW / / CW50 CW / / CW50 CW / / CW50 CW / / CW50 CW E 41-9/ / CW50 CW E 41-9/ / CW50 CW E 41-9/ / CW50 CW E 41-9/ / CW45 CW E 41-9/ / CW45 CW E 41-9/ / CW40 CW / / CW50 CW / / CW50 CW / / CW50 CW / / CW50 CW E 44-9/ / CW50 CW E 44-9/ / CW50 CW E 44-9/ / CW45 CW E 44-9/ / CW45 CW E 44-9/ / CW45 CW E 44-9/ / CW40 CW40 Egress Notes: Check all applicable local codes for emergency egress requirements. E = Window meets minimum clear opening of 24" height, 20" width, and 5.7 ft 2. E1 = Window meets minimum clear opening of 24" height, 20" width, and 5.0 ft 2. (1) Maximum performance when glazed with the appropriate glass thickness. To convert area to square meters (m²), multiply square feet by W-HG-22

23 DESIGN DATA Wood and Aluminum-Clad Exteriors FIXED UNITS TRANSOM UNITS Unit Visible Glass Ft 2 Standard Glass Thickness (mm) Annealed Tempered Performance Class & Grade 1 Unit Visible Glass Ft 2 Standard Glass Thickness (mm) Annealed Tempered Performance Class & Grade CW CW CW CW CW CW CW45/CW CW CW CW CW CW CW CW45/CW CW CW45/CW CW CW CW45/CW CW45/CW CW40/CW CW CW CW CW CW40/CW CW CW CW CW45/CW R R R R R R R R R R R R R R R R R R R R R R R R50 (1) Maximum design pressure when glazed with the appropriate glass thickness. Second number, where shown, requires tempered glass. W-HG-23

24 DESIGN DATA Wood and Aluminum-Clad Exteriors Cottage Sash COTTAGE UNITS FOR SINGLE- AND DOUBLE- Unit Egress Clear Opening (Inches) Vent Area Ft 2 Visible Glass Ft 2 Standard Glass Thickness (mm) Performance Class & Grade 1 Width Height Annealed Tempered Clad Wood VG / / CW50 CW45 VG / / CW50 CW45 VG / / CW50 CW45 VG / / CW50 CW45 VG / / CW50 CW45 VG / / CW50 CW45 VG / / CW40 CW40 VG / / CW50 CW45 VG / / CW50 CW45 VG / / CW50 CW45 VG / / CW50 CW45 VG / / CW50 CW45 VG / / CW50 CW45 VG / / CW40 CW40 VG / / CW50 CW45 VG / / CW50 CW45 VG / / CW50 CW45 VG / / CW50 CW45 VG / / CW50 CW45 VG / / CW50 CW45 VG / / CW40 CW40 VG / / CW50 CW45 VG / / CW50 CW45 VG / / CW50 CW45 VG / / CW50 CW45 VG / / CW50 CW45 VG / / CW50 CW45 VG3371 E1 29-9/ / CW40 CW40 Egress Notes: Check all applicable local codes for emergency egress requirements. E1 = Window meets minimum clear opening of 24" height, 20" width, and 5.0 ft 2. (1) Maximum performance when glazed with the appropriate glass thickness. To convert area to square meters (m²), multiply square feet by W-HG-24

25 DESIGN DATA Wood and Aluminum-Clad Exteriors Cottage Sash COTTAGE UNITS FOR SINGLE- AND DOUBLE- Unit Egress Clear Opening (Inches) Vent Area Ft 2 Visible Glass Ft 2 Standard Glass Thickness (mm) Performance Class & Grade 1 Width Height Annealed Tempered Clad Wood VG / / CW50 CW45 VG / / CW50 CW45 VG / / CW50 CW45 VG / / CW50 CW45 VG / / CW50 CW45 VG / / CW50 CW45 VG3771 E 33-9/ / CW40 CW40 VG / / CW50 CW45 VG / / CW50 CW45 VG / / CW50 CW45 VG / / CW50 CW45 VG / / CW50 CW45 VG / / CW45 CW45 VG4171 E 37-9/ / CW40 CW40 VG / / CW50 CW45 VG / / CW50 CW45 VG / / CW50 CW45 VG / / CW45 CW45 VG / / CW45 CW45 VG / / CW45 CW45 VG4571 E 41-9/ / CW40 CW40 VG / / CW50 CW45 VG / / CW50 CW45 VG / / CW45 CW45 VG / / CW45 CW45 VG / / CW45 CW45 VG / / CW40 CW40 VG4871 E 44-9/ / CW40 CW40 Egress Notes: Check all applicable local codes for emergency egress requirements. E = Window meets minimum clear opening of 24" height, 20" width, and 5.7 ft 2. (1) Maximum performance when glazed with the appropriate glass thickness. To convert area to square meters (m²), multiply square feet by W-HG-25

26 DESIGN DATA Wood and Aluminum-Clad Exteriors Replacement Vent VENT UNITS Unit Egress Clear Opening Width (Inches) Height (Inches) Vent Area Ft 2 Visible Glass Ft 2 Standard Glass Thickness (mm) Performance Class & Grade 1 Annealed Tempered Clad Wood 23.5 x / / CW50 CW x / / CW50 CW x / / CW50 CW x / / CW50 CW x / / CW50 CW x / / CW50 CW x / / CW50 CW x / / CW50 CW x / / CW50 CW x / / CW50 CW x / / CW50 CW x / / CW50 CW x / / CW50 CW x / / CW50 CW x / / CW50 CW x / / CW50 CW x / / CW50 CW x / / CW50 CW x / / CW50 CW x / / CW50 CW x / / CW50 CW x / / CW50 CW x / / CW50 CW x 71.5 E1 24-1/ / CW50 CW x / / CW50 CW x / / CW50 CW x / / CW50 CW x / / CW50 CW x / / CW50 CW x / / CW50 CW x / / CW50 CW x / / CW50 CW x / / CW50 CW x / / CW50 CW x 65.5 E1 26-1/ / CW50 CW x 71.5 E1 26-1/ / CW50 CW45 Egress Notes: Check all applicable local codes for emergency egress requirements. E1 = Window meets minimum clear opening of 24" height, 20" width, and 5.0 ft 2. (1) Maximum performance when glazed with the appropriate glass thickness. To convert area to square meters (m²), multiply square feet by W-HG-26

27 DESIGN DATA Wood and Aluminum-Clad Exteriors Replacement Vent VENT UNITS Unit Egress Clear Opening Width (Inches) Height (Inches) Vent Area Ft 2 Visible Glass Ft 2 Standard Glass Thickness (mm) Performance Class & Grade 1 Annealed Tempered Clad Wood 31.5 x / / CW50 CW x / / CW50 CW x / / CW50 CW x / / CW50 CW x / / CW50 CW x / / CW50 CW x / / CW50 CW x / / CW50 CW x / / CW50 CW x 61.5 E1 28-1/ / CW50 CW x 65.5 E1 28-1/ / CW50 CW x 71.5 E 28-1/ / CW50 CW x / / CW50 CW x / / CW50 CW x / / CW50 CW x / / CW50 CW x / / CW50 CW x / / CW50 CW x / / CW50 CW x 57.5 E1 32-1/ / CW50 CW x 59.5 E1 32-1/ / CW50 CW x 61.5 E 32-1/ / CW50 CW x 65.5 E 32-1/ / CW50 CW x 71.5 E 32-1/ / CW50 CW x / / CW50 CW x / / CW50 CW x / / CW50 CW x / / CW50 CW x / / CW50 CW x / / CW50 CW x / / CW50 CW x 57.5 E 36-1/ / CW50 CW x 59.5 E 36-1/ / CW50 CW x 61.5 E 36-1/ / CW50 CW x 65.5 E 36-1/ / CW50 CW x 71.5 E 36-1/ / CW50 CW x / / CW50 CW x / / CW50 CW x / / CW50 CW x / / CW50 CW x / / CW50 CW x / / CW50 CW x / / CW50 CW x 57.5 E 38-1/ / CW50 CW x 59.5 E 38-1/ / CW50 CW x 61.5 E 38-1/ / CW50 CW x 65.5 E 38-1/ / CW50 CW x 71.5 E 38-1/ / CW50 CW45 Egress Notes: Check all applicable local codes for emergency egress requirements. E = Window meets minimum clear opening of 24" height, 20" width, and 5.7 ft 2. E1 = Window meets minimum clear opening of 24" height, 20" width, and 5.0 ft 2. (1) Maximum performance when glazed with the appropriate glass thickness. To convert area to square meters (m²), multiply square feet by W-HG-27

28 DESIGN DATA Wood and Aluminum-Clad Exteriors Replacement Fixed and Transoms FIXED UNITS FIXED TRANSOM UNITS Unit Visible Glass Ft 2 Standard Glass Thickness (mm) Annealed Tempered Performance Class & Grade 1 Unit Visible Glass Ft 2 Standard Glass Thickness (mm) Annealed Tempered Performance Class & Grade 1 41 x CW50 41 x CW50 41 x CW50 41 x CW45/CW50 41 x CW50 41 x CW50 41 x CW50 41 x CW50 41 x CW50 41 x CW50 41 x CW50 41 x CW45/CW50 47 x CW50 47 x CW50 47 x CW50 47 x CW50 47 x CW50 47 x CW50 47 x CW50 47 x CW50 47 x CW45/CW50 47 x CW45/CW50 47 x CW45/CW50 47 x CW50 53 x CW45/CW50 53 x CW50 53 x CW50 53 x CW50 53 x CW50 53 x CW50 53 x CW45/CW50 53 x CW45/CW50 53 x CW50 53 x CW50 53 x CW50 53 x CW50 59 x CW50 59 x CW50 59 x CW50 59 x CW50 59 x CW45/CW50 59 x CW45/CW50 59 x CW50 59 x CW50 59 x CW50 59 x CW50 59 x CW50 59 x CW45/CW x R x R x R x R x R x R x R x R x R x R x R x R x R x R x R x R x R x R x R x R x R50 (1) Maximum performance when glazed with the appropriate glass thickness. Second number, where shown, requires tempered glass. W-HG-28

29 DESIGN DATA Wood and Aluminum-Clad Exteriors Replacement Cottage Sash VENT UNITS Unit Egress Clear Opening Width (Inches) Height (Inches) Vent Area Ft 2 Visible Glass Ft 2 Standard Glass Thickness (mm) Performance Class & Grade 1 Annealed Tempered Clad Wood VG23.5 x / / CW50 CW45 VG23.5 x / / CW50 CW45 VG23.5 x / / CW50 CW45 VG23.5 x / / CW50 CW45 VG23.5 x / / CW50 CW45 VG23.5 x / / CW50 CW45 VG23.5 x / / CW50 CW45 VG23.5 x / / CW50 CW45 VG23.5 x / / CW50 CW45 VG23.5 x / / CW40 CW40 VG27.5 x / CW50 CW45 VG27.5 x / / CW50 CW45 VG27.5 x / / CW50 CW45 VG27.5 x / / CW50 CW45 VG27.5 x / / CW50 CW45 VG27.5 x / / CW50 CW45 VG27.5 x / / CW50 CW45 VG27.5 x / / CW50 CW45 VG27.5 x / / CW50 CW45 VG27.5 x / / CW40 CW40 VG29.5 x / CW50 CW45 VG29.5 x / / CW50 CW45 VG29.5 x / / CW50 CW45 VG29.5 x / / CW50 CW45 VG29.5 x / / CW50 CW45 VG29.5 x / / CW50 CW45 VG29.5 x / / CW50 CW45 VG29.5 x / / CW50 CW45 VG29.5 x / / CW50 CW45 VG29.5 x / / CW40 CW40 VG31.5 x / CW50 CW45 VG31.5 x / / CW50 CW45 VG31.5 x / / CW50 CW45 VG31.5 x / / CW50 CW45 VG31.5 x / / CW50 CW45 VG31.5 x / / CW50 CW45 (1) Maximum performance when glazed with the appropriate glass thickness. To convert area to square meters (m²), multiply square feet by W-HG-29