Pella 250 Series. Size and performance summary. Glazing performance. Grille profiles and patterns. Size tables. Design Data

Transcription

1 ECTIN DIRECTRY Pella 250 eries FIXED WINDW ize and performance summary Glazing performance Grille profiles and patterns ize tables Design Data Detailed Product Description Cross sections The information published in this document is believed to be accurate at the time of publication. However, because we are constantly working to improve our products, specifications are subject to change without notice. Consult your local Pella representative for up-to-date product information. Pella 2018 Architectural Design Manual Division 08 penings Windows and Doors V250-FW-1

2 BRAND UMMARY FIXED WINDW Pella 250 eries Fixed windows feature an extruded, rigid PVC (polyvinyl chloride) frame with heatfused mitered corners for a fully welded corner assembly. Fixed Windows meet industry standards for water infiltration and wind resistance and meet ENERGY TAR guidelines with dual-pane or triple-pane insulated glass. BLCK FRAME DEIGN 3-1/4" Block 3-1/4" block frame can be used in new construction block or concrete walls. They may also be used in replacement of old aluminum or steel frame windows or pocket replacement into wood frames from the exterior. The block frames include interior and exterior accessory grooves. Custom sizes are available in 1/8" increments for a perfect fit. Integral 5/8" Flange The integral 5/8" flange frame can be used in new construction block or concrete walls. Commonly used in Florida and often referred to as "Florida Flange" frame. The frame depth is 3-1/4" includes interior accessory groove. Custom sizes are available in 1/8" increments for a perfect fit. NAIL FIN FRAME DEIGN With or Without Integrated J-Channel Continuous fin with welded corners adds a protective weather barrier and allows for hassle-free installation. The standard 3-1/4" frame depth includes interior and exterior accessory grooves. Nailing fin has a 1-1/8" setback from exterior face of window frame. Custom sizes are available in 1/8" increments for a perfect fit. 4-9/16" and 6-9/16" factory applied primed jamb extensions are available. Double-Wall Flush Flange (West Region nly) The frame depth is 3-1/4" and includes interior accessory groove. Custom sizes are available in 1/8" increments for a perfect fit. With J-Channel Without J-Channel West Region nly Rev. 05/08/2018 Pella 2018 Architectural Design Manual Division 08 penings Windows and Doors V250-FW-2

3 FIXED WINDW PRDUCT ELECTIN GUIDE ize and Performance Data Features and ptions ize and Performance Data IZE tandard izes pecial izes Available Built on 1/8" Increments FRAME Nail Fin nly Nail Fin with J-Channel Block Integral 5/8" Flange Double-Wall Flush Flange (West Region nly) PERFRMANCE 1 tandard Performance Meets or Exceeds AAMA/WDMA Ratings CW-PG30 to CW-PG50 Air Infiltration (cfm / ft 2 of 1.57 psf wind pressure) Design Pressure Water Penetration Resistance ther Performance Criteria psf 4.60 to 7.52 psf Forced Entry Resistance (Minimum ecurity Grade) 3 40 Features and ptions GLAZING (INULATING GLA) Glazing Type Dual-pane insulating glass Triple-pane insulating glass Insulated Glass ptions / Low-E Types Advanced Low-E Naturalun Low-E undefense Low-E 4 Bronze-tinted Advanced Low-E 4 Additional Glazing ptions Annealed glass Tempered glass bscure glass 5 Gas Fill / High Altitude Argon High altitude High altitude with argon 4 Features and ptions (Continued) INTERIR / EXTERIR CLR White Interior/White Exterior Almond Interior/Almond Exterior Fossil Interior/Fossil Exterior White Interior/Brown Exterior White Interior/Fossil Exterior White Interior/Black Exterior White Interior/Brick Red Exterior White Interior/Hartford Green Exterior White Interior/Morning ky Gray Exterior White Interior/Poplar White Exterior White Interior/Portobello Exterior White Interior/Tan Exterior GRILLE Grilles-Betwteen-the-Glass 3 3/4" Contour 5/8" flat 1" Contour Grille Patterns: Traditional, Prairie, Top Row, Custom - Equally Divided imulated-divided-light Grilles 1 (without spacer) 7/8" contour profile Grille Patterns: Traditional, Prairie, Top Row, Custom Equally Divided UND TRANMIIN CLA AND UTDR-INDR TRANMIIN CLA ize Tested 6 verall Glazing Thickness Exterior Glass Thickness Glazing ystem FIXED WINDW DUAL PANE INULATING GLA Interior Glass Thickness Third Pane Thickness TC Rating 48" x 60" 3/4" 3mm 3mm FIXED WINDW TRIPLE-PANE INULATING GLA 48" x 60" 1" 3mm 3mm 3mm ITC Rating = tandard; = ptional, ( ) = Not available. (3) The higher the level, the greater the product's ability to resist forced entry. (1) Published performance data is for single unit only. Combinations require reinforcing mullion (4) Not available with triple-pane glazing. between units. (5) Contact your local Pella sales representative for current offering. (2) Published performance data for air infiltration is determined by testing a minimum of four (4) (6) ATM E 1425 defines standard sizes for acoustical testing. Ratings achieved at that size are products of NFRC model size. Testing is conducted in accordance with ATM E283. Air infiltration representative of all sizes of the same configuration. ratings for products will differ by size. The performance data does not apply to combination The presence of Low-E or argon have negligible effect on sound attenuation characteristics. assemblies unless noted. Actual product performance may vary for a number of reasons including installation and product care. Rev. 05/08/2018 Pella 2018 Architectural Design Manual Division 08 penings Windows and Doors V250-FW-3

4 GLAZING PERFRMANCE - TTAL UNIT Dual-Pane Insulating Glass FIXED WINDW Glass Thickness Type of Glazing NFRC Certified Product # Glass (mm) Ext. Int. Gap Fill U-Factor Performance Values 1 HGC VLT CR haded Areas Meet ENERGY TAR Performance Criteria in Zones hown U.. Canada 2 Zone ER Zone FIXED - 3MM GLA VENT N NC C /4" Advanced Low-E IG PEL-N air with DL or grilles-between-the-glass PEL-N /4" Advanced Low-E IG PEL-N argon with DL or grilles-between-the-glass PEL-N /4" Naturalun Low-E IG PEL-N air with DL or grilles-between-the-glass PEL-N /4" Naturalun Low-E IG PEL-N argon with DL or grilles-between-the-glass PEL-N /4" undefense Low-E IG PEL-N air with DL or grilles-between-the-glass PEL-N /4" undefense Low-E IG PEL-N argon with DL or grilles-between-the-glass PEL-N FIXED - 5MM GLA 3/4" Advanced Low-E IG PEL-N air with DL or grilles-between-the-glass PEL-N /4" Advanced Low-E IG PEL-N argon with DL or grilles-between-the-glass PEL-N /4" Naturalun Low-E IG PEL-N air with DL or grilles-between-the-glass PEL-N /4" Naturalun Low-E IG PEL-N argon with DL or grilles-between-the-glass PEL-N /4" undefense Low-E IG PEL-N air with DL or grilles-between-the-glass PEL-N /4" undefense Low-E IG PEL-N argon with DL or grilles-between-the-glass PEL-N TINTED GLAZING - WITH 3MM GLA 3/4" Bronze Advanced Low-E IG PEL-N air with DL or grilles-between-the-glass PEL-N /4" Bronze Advanced Low-E IG PEL-N argon with DL or grilles-between-the-glass PEL-N TINTED GLAZING - WITH 5MM GLA 3/4" Bronze Advanced Low-E IG PEL-N air with DL or grilles-between-the-glass PEL-N /4" Bronze Advanced Low-E IG PEL-N argon with DL or grilles-between-the-glass PEL-N R-Value = 1/U-Factor HGC = olar Heat Gain Coefficient VLT % = Visible Light Transmission CR = Condensation Resistance ER = Canadian Energy Rating Climate Zones (1) Glazing performance values are calculated based on NFRC 100, NFRC 200 and NFRC 500. ENERGY TAR values are updated to 2016 (Version 6) criteria. (2) The values shown are based on Canada's updated ENERGY TAR 2015 initiative. Based on unit size, some products will use 2.5mm glass that may have improved glazing performance from what is shown. ee the Product Performance section for more detailed information or visit for Energy tar guidelines. Pella 2018 Architectural Design Manual Division 08 penings Windows and Doors V250-FW-4

5 GLAZING PERFRMANCE - TTAL UNIT Triple-Pane Insulating Glass FIXED WINDW Glass Thickness Type of Glazing NFRC Certified Product # Glass (mm) Ext. Mid. Int. Gap Fill U-Factor Performance Values 1 HGC VLT CR haded Areas Meet ENERGY TAR Performance Criteria in Zones hown U.. Canada 2 Zone ER Zone FIXED - 3MM GLA N NC C " Advanced Low-E Triple-pane IG PEL-N air with Grilles-between-the-glass PEL-N " Advanced Low-E Triple-pane IG PEL-N argon with Grilles-between-the-glass PEL-N " Naturalun Low-E Triple-pane IG PEL-N air with Grilles-between-the-glass PEL-N " Naturalun Low-E Triple-pane IG PEL-N argon with Grilles-between-the-glass PEL-N FIXED - 4MM GLA 1" Advanced Low-E Triple-pane IG PEL-N air with Grilles-between-the-glass PEL-N " Advanced Low-E Triple-pane IG PEL-N argon with Grilles-between-the-glass PEL-N " Naturalun Low-E Triple-pane IG PEL-N air with Grilles-between-the-glass PEL-N " Naturalun Low-E Triple-pane IG PEL-N argon with Grilles-between-the-glass PEL-N R-Value = 1/U-Factor HGC = olar Heat Gain Coefficient VLT % = Visible Light Transmission CR = Condensation Resistance ER = Canadian Energy Rating Climate Zones (1) Glazing performance values are calculated based on NFRC 100, NFRC 200 and NFRC 500. ENERGY TAR values are updated to 2016 (Version 6) criteria. (2) The values shown are based on Canada's updated ENERGY TAR 2015 initiative. Based on unit size, some products will use 2.5mm glass that may have improved glazing performance from what is shown. ee the Product Performance section for more detailed information or visit for Energy tar guidelines. Pella 2018 Architectural Design Manual Division 08 penings Windows and Doors V250-FW-5

6 GRILLE TYPE FIXED WINDW Grille Profiles GRILLE-BETWEEN-THE-GLA IMULATED-DIVIDED-LIGHT GRILLE WITHUT PACER 5/8" 3/4" 1" 3/4" 7/8" 5/8" Flat Grille 3/4" Contour 1" Contour 3/4" Contour - Triple 7/8" Contour Grille Patterns PRAIRIE LITE PATTERN Prairie - Approximately 4" from edge of sash to center of bar - Minimum actual glass is 13" 9-Lite Prairie THER AVAILABLE PATTERN Traditional - pecify number of lites. - Grilles must be equally divided on visible glass. - Minimum 6" x 6". Traditional Top Row Custom Equally Divided Top Row - tandard visible glass to separator bar must be 1/2 upper actual glass pecial hapes Traditional grilles only Traditional Housetop Triangle ctagon For traditional patterns, see size tables. Pella 2018 Architectural Design Manual Division 08 penings Windows and Doors V250-FW-6

7 FIXED WINDW PECIAL IZE FRAME DIMENIN Composite Assemblies and pecial hapes Miscellaneous Formulas RECTANGLE 2-WIDE CMPITE WITH INTEGRAL MULLIN 3-WIDE CMPITE WITH INTEGRAL MULLIN MINIMUM 11-1/2" W x 11-1/2" H (292 x 292) MAXIMUM 108" W x 108" H (2 743 x 2 743) Maximum 40 sq. ft. 2-HIGH CMPITE WITH INTEGRAL MULLIN General Notes: MINIMUM 23-1/2" W x 11-1/2" H (597 x 292) MAXIMUM 108" W x 108" H (2 743 x 2 743) Maximum 48 sq. ft. MINIMUM 35-1/2" W x 11-1/2" H (902 x 292) MAXIMUM 108" W x 108" H (2 743 x 2 743) Maximum 48 sq. ft. To convert areas to square meters (m 2 ), multiply square feet by Rough pening Dimension + 1/2". Keep frame di men sions to the near est 1/4" increment Tempered glass must measure > 18-1/2 diagonally. Go to next largest standard size to determine performance class and grade. Bronze limited to 22 ft 2. Miscellaneous Formulas INGLE 2-WIDE 3-WIDE MINIMUM 11-1/2" W x 23-1/2" H (292 x 597) MAXIMUM 108" W x 108" H (2 743 x 2 743) Maximum 48 sq. ft. KEY: VIIBLE GLA ACTUAL GLA AGW = Actual Glass Width Width = " Height = " Width = 3.25" Height = 3.25" AGW= (W / 2) - 3.5" AGW=(W / 3) " LEFT & RIGHT GABLE HUE TP LEFT & RIGHT 90 TRIANGLE CTAGN Custom hapes Notes: MINIMUM 11-1/2" W x 11-1/2" H (292 x 292) MAXIMUM 40 ft 2 w/ 108" (2 743) in any one direction MINIMUM 17-1/2" W x 11-1/2" H (445 x 292) MAXIMUM 40 ft 2 w/ 108" (2 743) in any one direction MINIMUM 23-1/2" W x 11-1/2" H (597 x 292) MAXIMUM 40 ft 2 w/ 108" (2 743) in any one direction MINIMUM 17-1/2" W x 17-1/2" H (445 x 445) MAXIMUM 73-1/2" W x 73-1/2" H (1 867 x 1 867) Both width and height cannot be > than 73-1/2" Maximum quare Foot = 40 ft 2 Bronze glass is limited to 22 ft 2 If long side is 95-1/2", width and height ratio 8:1 If long side is > 95-1/2", width and height ratio < 5:1 Minimum overall width plus overall height is 29" Maximum frame width with 9-Lite Prairie grille = 72" Minimum leg length is 5-1/2" Minimum corner angle is 40º If glass width/height ratio is > 5:1, then glass must be tempered To convert areas to square meters (m 2 ), multiply square feet by Composite units have a performance class and grade of LC25. Pella 2018 Architectural Design Manual Division 08 penings Windows and Doors V250-FW-7

8 IZE TABLE FIXED WINDW pening (462) (457) (610) (711) (762) (813) (914) (1 219) (343) (445) (597) (699) (749) (800) (902) (1 207) 1' 2" 1' 6" 2' 0" 2' 4" 2' 6" 2' 8" 3' 0" 4' 0" / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / /5-6 (1 829) (1 816) 6' 0" 71 (1 676) (1 664) 5' 6" 65 (1 575) (1 562) 5' 2" 61 (462) (343) (457) (445) (610) (597) (711) (699) (762) (749) (813) (800) (914) (902) (1 219) (1 207) (1 321) (1 308) (1 372) (1 359) (1 524) (1 511) 1' 2" 1' 6" 2' 0" 2' 4" 2' 6" 2' 8" 3' 0" 4' 0" 4' 4" 4' 6" 5' 0" 1 / 2" 53 1 / 2 " 51 1 / 2 " 47 1 / 2 " 35 1 / 2" 31 1 / 2 " 29 1 / 2 " 27 1/ 2 " 23 1 / 2 " 17 1 / 2 " 13 1/ 2 " / / / / / / / /6-0 Not to scale. Pella 2018 Architectural Design Manual Division 08 penings Windows and Doors V250-FW-8

9 IZE TABLE FIXED WINDW (1 372) (1 359 (1 524) (1 511) (1 829) (1 816) (2 134) (2 121) (2 438) (2 426) pening 4' 6" 53 5' 0" 59 6' 0" 71 7' 0" 83 8' 0" 95 (462) (343) (457) (445) (711) (699) (762) (749) (813) (800) 2' 4" 2' 6" 2' 8" / 2" 29 1 / 2 " 27 1/ 2 " 23 " 4-6/ / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / /5-0 5' 2" 4-6/ / / / / /5-6 (1 829) (1 816) 6' 0" 71 (1 676) (1 664) 5' 6" 65 (1 575) (1 562) 61 (610) (597) (914) (902) (1 219) (1 207) (1 321) (1 308) (1 372) (1 359) (1 524) (1 511) 1' 2" 1' 6" 2' 0" 3' 0" 4' 0" 4' 4" 4' 6" 5' 0" 1 / / 2 " 13 1/ 2 " 1 / 2" 53 1 / 2 " 51 1 / 2 " 47 1 / 2 " 35 / 2 " / / /6-0 Not to scale. Pella 2018 Architectural Design Manual Division 08 penings Windows and Doors V250-FW-9

10 DEIGN DATA ingle Units FIXED WINDW INGLE FIXED UNIT Call ut Width Height Visible Glass Area Glass Thickness (mm) tandard tandard Performance Class & Grade 1 1-2/ /2 13-1/ CW50 1-2/ /2 17-1/ CW50 1-2/ /2 23-1/ CW50 1-2/ /2 27-1/ CW50 1-2/ /2 29-1/ CW50 1-2/ /2 31-1/ CW50 1-2/ /2 35-1/ CW50 1-2/ /2 47-1/ CW50 1-2/ /2 51-1/ CW50 1-2/ /2 53-1/ CW50 1-2/ /2 59-1/ CW50 1-2/ /2 61-1/ CW30 1-2/ /2 65-1/ CW30 1-2/ /2 71-1/ CW30 1-6/ /2 13-1/ CW50 1-6/ /2 17-1/ CW50 1-6/ /2 23-1/ CW50 1-6/ /2 27-1/ CW50 1-6/ /2 29-1/ CW50 1-6/ /2 31-1/ CW50 1-6/ /2 35-1/ CW50 1-6/ /2 47-1/ CW50 1-6/ /2 51-1/ CW50 1-6/ /2 53-1/ CW50 1-6/ /2 59-1/ CW50 1-6/ /2 61-1/ CW30 1-6/ /2 65-1/ CW30 1-6/ /2 71-1/ CW30 2-0/ /2 13-1/ CW50 2-0/ /2 17-1/ CW50 2-0/ /2 23-1/ CW50 2-0/ /2 27-1/ CW50 2-0/ /2 29-1/ CW50 2-0/ /2 31-1/ CW50 2-0/ /2 35-1/ CW50 2-0/ /2 47-1/ CW50 2-0/ /2 51-1/ CW50 2-0/ /2 53-1/ CW50 2-0/ /2 59-1/ CW50 2-0/ /2 61-1/ CW30 2-0/ /2 65-1/ CW30 2-0/ /2 71-1/ CW30 2-4/ /2 13-1/ CW50 2-4/ /2 17-1/ CW50 2-4/ /2 23-1/ CW50 2-4/ /2 27-1/ CW50 2-4/ /2 29-1/ CW50 2-4/ /2 31-1/ CW50 Page 1 of 4 (1) Maximum performance when glazed with the appropriate glass thickness. To convert areas to square meters (m²), multiply square feet by Pella 2018 Architectural Design Manual Division 08 penings Windows and Doors V250-FW-10

11 DEIGN DATA ingle Units FIXED WINDW INGLE FIXED UNIT Call ut Width Height Visible Glass Area Glass Thickness (mm) tandard tandard Performance Class & Grade 1 2-4/ /2 35-1/ CW50 2-4/ /2 47-1/ CW50 2-4/ /2 51-1/ CW50 2-4/ /2 53-1/ CW50 2-4/ /2 59-1/ CW50 2-4/ /2 61-1/ CW30 2-4/ /2 65-1/ CW30 2-4/ /2 71-1/ CW30 2-6/ /2 13-1/ CW50 2-6/ /2 17-1/ CW50 2-6/ /2 23-1/ CW50 2-6/ /2 27-1/ CW50 2-6/ /2 29-1/ CW50 2-6/ /2 31-1/ CW50 2-6/ /2 35-1/ CW50 2-6/ /2 47-1/ CW50 2-6/ /2 51-1/ CW50 2-6/ /2 53-1/ CW50 2-6/ /2 59-1/ CW50 2-6/ /2 61-1/ CW30 2-6/ /2 65-1/ CW30 2-6/ /2 71-1/ CW30 2-8/ /2 13-1/ CW50 2-8/ /2 17-1/ CW50 2-8/ /2 23-1/ CW50 2-8/ /2 27-1/ CW50 2-8/ /2 29-1/ CW50 2-8/ /2 31-1/ CW50 2-8/ /2 35-1/ CW50 2-8/ /2 47-1/ CW50 2-8/ /2 51-1/ CW50 2-8/ /2 53-1/ CW50 2-8/ /2 59-1/ CW50 2-8/ /2 61-1/ CW30 2-8/ /2 65-1/ CW30 2-8/ /2 71-1/ CW30 3-0/ /2 13-1/ CW50 3-0/ /2 17-1/ CW50 3-0/ /2 23-1/ CW50 3-0/ /2 27-1/ CW50 3-0/ /2 29-1/ CW50 3-0/ /2 31-1/ CW50 3-0/ /2 35-1/ CW50 3-0/ /2 47-1/ CW50 3-0/ /2 51-1/ CW50 3-0/ /2 53-1/ CW50 3-0/ /2 59-1/ CW50 3-0/ /2 61-1/ CW30 3-0/ /2 65-1/ CW30 3-0/ /2 71-1/ CW30 Page 2 of 4 (1) Maximum performance when glazed with the appropriate glass thickness. To convert areas to square meters (m²), multiply square feet by Pella 2018 Architectural Design Manual Division 08 penings Windows and Doors V250-FW-11

12 DEIGN DATA ingle Units FIXED WINDW INGLE FIXED UNIT Call ut Width Height Visible Glass Area Glass Thickness (mm) tandard tandard Performance Class & Grade 1 4-0/ /2 13-1/ CW50 4-0/ /2 17-1/ CW50 4-0/ /2 23-1/ CW50 4-0/ /2 27-1/ CW50 4-0/ /2 29-1/ CW50 4-0/ /2 31-1/ CW50 4-0/ /2 35-1/ CW50 4-0/ /2 47-1/ CW50 4-0/ /2 51-1/ CW50 4-0/ /2 53-1/ CW50 4-0/ /2 59-1/ CW50 4-0/ /2 61-1/ CW30 4-0/ /2 65-1/ CW30 4-0/ /2 71-1/ CW30 4-6/ /2 13-1/ CW50 4-6/ /2 17-1/ CW50 4-6/ /2 23-1/ CW50 4-6/ /2 27-1/ CW50 4-6/ /2 29-1/ CW50 4-6/ /2 31-1/ CW50 4-6/ /2 35-1/ CW50 4-6/ /2 47-1/ CW50 4-6/ /2 51-1/ CW50 4-6/ /2 53-1/ CW50 4-6/ /2 59-1/ CW50 4-6/ /2 61-1/ CW30 4-6/ /2 65-1/ CW30 4-6/ /2 71-1/ CW30 5-0/ /2 13-1/ CW50 5-0/ /2 17-1/ CW50 5-0/ /2 23-1/ CW50 5-0/ /2 27-1/ CW50 5-0/ /2 29-1/ CW50 5-0/ /2 31-1/ CW50 5-0/ /2 35-1/ CW50 5-0/ /2 47-1/ CW50 5-0/ /2 51-1/ CW50 5-0/ /2 53-1/ CW50 5-0/ /2 59-1/ CW50 5-0/ /2 61-1/ CW30 5-0/ /2 65-1/ CW30 5-0/ /2 71-1/ CW30 Page 3 of 4 (1) Maximum performance when glazed with the appropriate glass thickness. To convert areas to square meters (m²), multiply square feet by Pella 2018 Architectural Design Manual Division 08 penings Windows and Doors V250-FW-12

13 DEIGN DATA ingle Units FIXED WINDW INGLE FIXED UNIT Call ut Width Height Visible Glass Area Glass Thickness (mm) tandard tandard Performance Class & Grade 1 6-0/ /2 13-1/ CW30 6-0/ /2 17-1/ CW30 6-0/ /2 23-1/ CW30 6-0/ /2 27-1/ CW30 6-0/ /2 29-1/ CW30 6-0/ /2 31-1/ CW30 6-0/ /2 35-1/ CW30 6-0/ /2 47-1/ CW30 6-0/ /2 51-1/ CW30 6-0/ /2 53-1/ CW30 6-0/ /2 59-1/ CW30 6-0/ /2 61-1/ CW30 6-0/ /2 65-1/ CW30 6-0/ /2 71-1/ CW30 7-0/ /2 13-1/ CW30 7-0/ /2 17-1/ CW30 7-0/ /2 23-1/ CW30 7-0/ /2 27-1/ CW30 7-0/ /2 29-1/ CW30 7-0/ /2 31-1/ CW30 7-0/ /2 35-1/ CW30 7-0/ /2 47-1/ CW30 7-0/ /2 51-1/ CW30 7-0/ /2 53-1/ CW30 7-0/ /2 59-1/ CW30 8-0/ /2 13-1/ CW30 8-0/ /2 17-1/ CW30 8-0/ /2 23-1/ CW30 8-0/ /2 27-1/ CW30 8-0/ /2 29-1/ CW30 8-0/ /2 31-1/ CW30 8-0/ /2 35-1/ CW30 8-0/ /2 47-1/ CW30 8-0/ /2 51-1/ CW30 8-0/ /2 53-1/ CW30 8-0/ /2 59-1/ CW30 Page 4 of 4 (1) Maximum performance when glazed with the appropriate glass thickness. To convert areas to square meters (m²), multiply square feet by Pella 2018 Architectural Design Manual Division 08 penings Windows and Doors V250-FW-13

14 DEIGN DATA Two Wide Fixed Units Pella 250 eries FIXED WINDW 2-WIDE FIXED UNIT Call ut Width Height Visible Glass Area Glass Thickness (mm) tandard tandard Performance Class & Grade 1 1-2/ / LC30 1-2/ / LC30 1-2/ / LC30 1-2/ / LC30 1-2/ / LC30 1/2/ / LC30 1-2/ / LC30 1-2/ / LC30 1-2/ / LC30 1-2/ / LC30 1-2/ / LC30 1-2/ / LC30 1-2/ / LC30 1-2/ / LC30 1-6/ / LC30 1-6/ / LC30 1-6/ / LC30 1-6/ / LC30 1-6/ / LC30 1-6/ / LC30 1-6/ / LC30 1-6/ / LC30 1-6/ / LC30 1-6/ / LC30 1-6/ / LC30 1-6/ / LC30 1-6/ / LC30 1-6/ / LC30 2-0/ / LC30 2-0/ / LC30 2-0/ / LC30 2-0/ / LC30 2-0/ / LC30 2-0/ / LC30 2-0/ / LC30 2-0/ / LC30 2-0/ / LC30 2-0/ / LC30 2-0/ / LC30 2-0/ / LC30 2-0/ / LC30 2-0/ / LC30 Page 1 of 3 (1) Maximum performance when glazed with the appropriate glass thickness. To convert areas to square meters (m²), multiply square feet by Pella 2018 Architectural Design Manual Division 08 penings Windows and Doors V250-FW-14

15 DEIGN DATA Two Wide Fixed Units Pella 250 eries FIXED WINDW 2-WIDE FIXED UNIT Call ut Width Height Visible Glass Area Glass Thickness (mm) tandard tandard Performance Class & Grade 1 2-4/ / LC30 2-4/ / LC30 2-4/ / LC30 2-4/ / LC30 2-4/ / LC30 2-4/ / LC30 2-4/ / LC30 2-4/ / LC30 2-4/ / LC30 2-4/ / LC30 2-4/ / LC30 2-4/ / LC30 2-4/ / LC30 2-4/ / LC30 2-6/ / LC30 2-6/ / LC30 2-6/ / LC30 2-6/ / LC30 2-6/ / LC30 2-6/ / LC30 2-6/ / LC30 2-6/ / LC30 2-6/ / LC30 2-6/ / LC30 2-6/ / LC30 2-6/ / LC30 2-6/ / LC30 2-6/ / LC30 2-8/ / LC30 2-8/ / LC30 2-8/ / LC30 2-8/ / LC30 2-8/ / LC30 2-8/ / LC30 2-8/ / LC30 2-8/ / LC30 2-8/ / LC30 2-8/ / LC30 2-8/ / LC30 2-8/ / LC30 2-8/ / LC30 2-8/ / LC30 Page 2 of 3 (1) Maximum performance when glazed with the appropriate glass thickness. To convert areas to square meters (m²), multiply square feet by Pella 2018 Architectural Design Manual Division 08 penings Windows and Doors V250-FW-15

16 DEIGN DATA Two Wide Fixed Units Pella 250 eries FIXED WINDW 2-WIDE FIXED UNIT Call ut Width Height Visible Glass Area Glass Thickness (mm) tandard tandard Performance Class & Grade 1 3-0/ / LC30 3-0/ / LC30 3-0/ / LC30 3-0/ / LC30 3-0/ / LC30 3-0/ / LC30 3-0/ / LC30 3-0/ / LC30 3-0/ / LC30 3-0/ / LC30 3-0/ / LC30 3-0/ / LC30 3-0/ / LC30 3-0/ / LC30 4-0/ / LC30 4-0/ / LC30 4-0/ / LC30 4-0/ / LC30 4-0/ / LC30 4-0/ / LC30 4-0/ / LC30 4-0/ / LC30 4-0/ / LC30 4-0/ / LC30 4-0/ / LC30 4-0/ / LC30 4-0/ / LC30 4-0/ / LC30 Page 3 of 3 (1) Maximum performance when glazed with the appropriate glass thickness. To convert areas to square meters (m²), multiply square feet by Pella 2018 Architectural Design Manual Division 08 penings Windows and Doors V250-FW-16

17 DETAILED PRDUCT DECRIPTIN FIXED WINDW FRAME verall frame depth: 3-1/4" on all frame types. members are mitered and heat fused to provide a fully welded corner assembly. ill is fitted with weeps. : [1-1/8" setback nail fin for 2-1/8" wall depth] [Block frame for 3-1/4" wall depth] [Integral 5/8" flange for 3" wall depth] [Double-Wall Flush Flange for 3" wall depth (West region only)]. Interior and exterior frame surfaces are extruded rigid PVC. GLAZING YTEM Quality float glass complying with ATM C Exterior face-glazed sealed insulating glass. Dual-Pane annealed [Advanced Low-E coated [with Argon]] [Naturalun Low-E coated [with Argon]] [undefense Low-E coated [with Argon]] [Bronze, Advanced Low-E coated [with Argon]] [with Argon]] [bscure 2] [High Altitude 1] [Tempered]. -or- 1" Triple-Pane annealed [Advanced Low-E coated [with Argon] [Naturalun Low-E coated [with Argon] [bscure] [High Altitude 1] [Tempered]. INTERIR / EXTERIR Window frame and sash members are [[White] [Almond] [Fossil] with integral color extruded throughout the profiles] [[Brown] [Black] [Brick Red] [Hartford Green] [Morning ky Gray] [Poplar White] [Portobello] [Tan] [Fossil] exterior, consisting of a solar reflective coating exceeding AAMA 613 test requirements, with White integral color extruded throughout the profiles on the interior]. All exposed PVC surfaces are smooth, glossy and uniform in appearance. PTINAL PRDUCT Grilles Grilles-Between-the-Glass [Dual-Pane Insulating glass contains [[3/4"] [1"] contoured] [5/8" flat] aluminum grilles permanently installed between two panes of glass] [Triple-Pane Insulating glass contains 3/4" contoured aluminum grilles permanently installed between three panes of glass]. Patterns are [Traditional] [9-Lite Prairie] [Top Row]. Interior grille color matches interior frame. Exterior grille color [3/4" Grille is [White] [Almond 3] [Fossil 3] [Brown] [Black] [Brick Red] [Hartford Green] [Morning ky Gray] [Poplar White] [Portobello] [Tan]] [1" Grille is [White] [Almond 3] [Fossil3]] [5/8" Grille is [White] [Almond 3] [Fossil 3]]. -or- imulated-divided-light grilles 7/8" contoured aluminum grilles permanently bonded to the interior and exterior of glass. Patterns are [Traditional] [9-Lite Prairie] [Top Row]. Available only on units glazed with Dual Pane insulating glass. (1) Dual Pane IG High Altitude glazings are available with or without Argon. Triple Pane IG High Altitude glazings are only available without Argon. (2) bscure glass not available with Bronze Advanced Low-E. (3) Almond grilles only available on Almond units. Almond units with grilles will have an Almond grille color, Fossil extruded color units with grilles have a Fossil grille color. Rev. 05/08/2018 Pella 2018 Architectural Design Manual Division 08 penings Windows and Doors V250-FW-17

18 UNIT ECTIN Types FIXED WINDW NEW CNTRUCTIN FRAME tandard Nail Fin REPLACEMENT FRAME tandard Block 3 1/4" AW [83] 3 1/4" AW [83] 1/4" [6] 3" [77] 1/4" [6] 3" [77] 2 1/4" [16] 1 3/16" [30] 5/8" [16] 1 1/8" [29] 1 3/16" [30] tandard Nail Fin with J-Channel 5/8" Flush Flange - Florida Region nly 3/8" [10] 1 1/8" [29] 13/16" [21] 1 3/16" [30] 1 3/16" [30] 1/2" [13] Double-Wall Flush Flange GLAZING PTIN 3/4" IG 1" TRIPLE-PANE IG 3 1/4" AW [83] 3 1/4" AW [83] cale 3" = 1' 0" All dimensions are approximate. Pella 2018 Architectural Design Manual Division 08 penings Windows and Doors V250-FW-18

19 UNIT ECTIN tandard Nail Fin FIXED WINDW H 3 1/4" AW [83] J 1 1/8" [29] 1 3/16" [30] J JAMB FRAME HEIGHT H HEAD ILL FRAME WIDTH 4 9/16" [116] 6 9/16" [167] 1 1/8" [29] 1 1/8" [29] ptional Factory Applied Jamb Extensions 2 7/16" [62] 2 7/16" [61] 4 7/16" [112] 5/8" [16] H 4 9/16" 4 9/16" 6 9/16" HIM 1 3/16" [30] J TTAL FRAME HEIGHT FRAME HEIGHT 1/2" [13] FRAME HEIGHT H HIM HEAD HRIZNTAL INTEGRAL MULLIN 2 13/16" [72] ILL cale 3" = 1' 0" All dimensions are approximate. Pella 2018 Architectural Design Manual Division 08 penings Windows and Doors V250-FW-19

20 FIXED WINDW UNIT ECTIN tandard Nail Fin Composite with Integral Mullion H J VIM 3 1/4" AW [83] 1 1/8" [29] 1 3/16" [30] 2 13/16" [72] FRAME HEIGHT 1 1/8" [29] 1 3/16" [30] 2 13/16" [72] 4 3/4" [121] H HEAD ILL J JAMB VIM VERTICAL INTEGRAL MULLIN J JAMB FRAME WIDTH 1/2" [13] FRAME WIDTH TTAL FRAME WIDTH 1 1/8" [29] H J VIM VIM J JAMB VIM VERTICAL INTEGRAL MULLIN VIM VERTICAL INTEGRAL MULLIN J JAMB FRAME WIDTH 1/2" [13] FRAME WIDTH 1/2" [13] FRAME WIDTH TTAL FRAME WIDTH cale 3" = 1' 0" All dimensions are approximate. Pella 2018 Architectural Design Manual Division 08 penings Windows and Doors V250-FW-20