SECTION DIRECTORY W-FW-1 FIXED WINDOW

Transcription

1 ECTION DIRECTORY Fixed ash In Frame General Information Product Matrix...W-FW-1 ound Transmission Class and Outdoor-Indoor Transmission Class...W-FW-4 Product election Guide ize and Performance Data...W-FW-4 Features and Options...W-FW-5 Glazing Performance...W-FW-6 Grille Types... W-FW-13 Typical Grille Patterns Curved hapes... W-FW-14 Arch Heads... W-FW-15 Custom Curved hapes... W-FW-16 Interior Glazed Curved hapes... W-FW-17 ize and Glazing Options... W-FW-18 Hurricanehield Clad Curved... W-FW-19 Design Data - Design Pressure Performance Clad Curved... W-FW-20 Advanced Clad Curved... W-FW-21 Detailed Product Descriptions Interior Glazed... W-FW-22 Exterior Glazed... W-FW-23 Unit ections Curved Interior Glazed... W-FW-24 Curved Interior Glazed Hurricanehield... W-FW-25 Rectangular and Angled Interior Glazed... W-FW-26 Rectangular Interior Glazed Hurricanehield... W-FW-27 Rectangular Exterior Glazed... W-FW-28 The information published in this document is believed to be accurate at the time of publication. However, because we are constantly working to improve our products, specifications are subject to change without notice. Consult your local Pella representative for up-to-date product information. W-FW-1

2 PRODUCT MATRIX PRODUCT ILL PROFILE RECTANGLE CURVED ANGLED ARCHITECT ERIE FIXED AH IN FRAME ALUMINUM-CLAD EXTERIOR FIXED AH IN FRAME ARCHITECT ERIE FIXED AH IN FRAME WOOD EXTERIOR DEIGNER ERIE FIXED AH IN FRAME ALUMINUM-CLAD EXTERIOR PELLA 450 ERIE FIXED AH IN FRAME ALUMINUM-CLAD EXTERIOR 1 FIXED FRAME DIRECT ET INTERIOR GLAZED ALUMINUM-CLAD EXTERIOR FIXED FRAME DIRECT ET FIXED FRAME DIRECT ET INTERIOR GLAZED TRADITIONAL TYLE COLLECTION ALUMINUM-CLAD EXTERIOR FIXED FRAME DIRECT ET INTERIOR GLAZED CONTEMPORARY TYLE COLLECTION ALUMINUM-CLAD EXTERIOR FIXED FRAME DIRECT ET EXTERIOR GLAZED ALUMINUM-CLAD EXTERIOR (1) ee Casement section for details on rectangular units. (2) ee the Casement section for curved and angled shape units. Visit for complete information. W-FW-2

3 DEIGN DATA Wood and Aluminum-Clad Exteriors Rectangle hapes General Restrictions FOR ALL RECTANGULAR Units Custom tile and Rail Widths (Architect eries Profile Only) RAIL WIDTH (A) RANGE RETRICTION TOP RAIL 1-7/8" to 5- TILE 1-7/8" to 5- BOTTOM RAIL 1-7/8" to 15" Rails and stiles that do not meet at 90 degrees must be the same Width (A) dimension. A CLAD UNIT A WOOD UNIT RECTANGLE FIXED UNIT MINIMUM MAXIMUM RETRICTION Architect eries Fixed Width 1' 5" 4' 11" Height 1' 2" 6' 1" Keep frame dimensions to the nearest 1/4" increments. Designer eries Fixed Width 1' 5" 4' 11" Keep frame dimensions to the nearest 1/4" increments. Height 1' 5" 6' 1" Pella 450 eries Fixed Width 1' 5" 4' 11" Keep frame dimensions to the nearest 1/4" increments. Height 1' 2" 5' 11" ee Casement section for standard sizes and performance information. W-FW-3

4 PRODUCT ELECTION GUIDE ize and Performance Data ound Transmission Class - OITC HAPE OTHER CURVED RECTANGULAR / ANGLED HAPE IZE Custom shapes and sizes made to order INTERIOR GLAZED UNIT PERFORMANCE 1, 2 Meets or exceeds AAMA / WDMA ratings Fin Installation Meets or exceeds AAMA/WDMA ratings - Clip or crew-through-frame installation F-CW40 F-CW50 Hallmark Certified F CW60 CW90 Hallmark Certified F-CW40 F CW50 Hallmark Certified F-CW60 F-CW90 Hallmark Certified Air Infiltration (cfm / ft 2 of 6.24 psf wind pressure) Water Resistance psf psf Hurricanehield Products with Impact-resistant Glass Up to F - CW90 Hallmark Certified UP TO F-CW90 Hallmark Certified OUND TRANMIION CLA / OUTDOOR-INDOOR TRANMIION CLA Product Frame ize Tested 3 RECTANGULAR AND ANGLED HAPED CLAD WINDOW Overall Glazing Thickness Glazing ystem Exterior Glass Thickness 47" x 59" FIXED IMPACT LAMINATED GLAZING Interior Glass Thickness TC Rating OITC Rating 1" 11.7mm PVB 5mm " 11.7mm GP 5mm /4" 13.6mm GP 6mm FIXED DOUBLE-PANE GLAZING 3mm 3mm mm 5mm FIXED DOUBLE-PANE GLAZING WITH INTEGRAL GRILLE 3mm 3mm ( ) = Not Available (1) Maximum performance for single unit when glazed with the appropriate glass thickness. ee Design Data pages in this section for specific product performance class and grade values. (2) AAMA / WDMA AW performance class attainable with EnduraClad Plus finish. Contact Pella Representative for details. (3) ATM E 1425 defines standard sizes for acoustical testing. Ratings achieved at that size are representative of all sizes of the same configuration. Rev. 7/24/2017 W-FW-4

5 PRODUCT ELECTION GUIDE Features and Options Curved hapes Rectangular / Angled hapes GLAZING Glazing Type Dual-Pane Insulating Glass O Triple-Pane Insulating Glass O O Clad panel with hardboard core O Insulated glass options / Low-E Types Advanced Low-E undefense Low-E O O AdvancedComfort Low-E O O Naturalun Low-E O O Clear (no Low-E coating) O O Additional Glass Options Annealed Glass Tempered Glass O O Obscure Glass 2 O O Tinted Glass (Bronze, Gray and Green) O O pandrel Glass ( only) O O Non-Impact Laminated Dual-Pane Insulating Glass O O Hurricaneshield Products with Impact-Resistant Laminated Dual-Pane Insulating Glass O O Gas Fill/High Altitude Argon Krypton 5 O O High altitude O O EXTERIOR EnduraClad aluminum-clad exterior EnduraClad Plus aluminum-clad exterior O O Cladding Colors 27 tandard colors 1 Custom colors 2 O O INTERIOR FINIH Factory primed interior O O Factory prefinished paint 2 O O Factory prefinished stain 2 O O WOOD TYPE Pine Mahogany O O Douglas Fir O O GRILLE Integral Light Technology Grilles Traditional O O 6 unburst O Custom O imulated Divided Light Grilles Traditional, Prairie, Cross, Top Row O O unburst, tarburst. O Roomside Removable Grilles Traditional O 3 O unburst O 3 Custom O 3 Grilles-Between-the-Glass Traditional, Prairie, Cross, Top Row O 4 O unburst O = tandard; O = Optional; ( ) = Not Available (1) Pella 450 eries is limited to White, Tan, Brown, Putty, Poplar White, Hartford Green, Black, Brick Red, Morning ky Gray and Portabello. (2) Contact your local Pella sales representative for current designs and color options. (3) In select shapes. (4) In select shapes. Cross and Top Row not available in curved units. (5) Only available with Triple-Pane glazing, not available with high altitude glazing. (6) Only available in Architect eries Contemporary rectangular units with square grille profile. W-FW-5

6 GLAZING PERFORMANCE TOTAL UNIT Interior Glazed Rectangular and Curved hapes Glazing Thickness Type of Glazing NFRC Certified Product # Glass (mm) Ext. Int. Gap Fill Performance Values 1 U-Factor HGC VLT % CR haded Areas Meet ENERGY TAR Performance Criteria in Zones hown U.. Canada 2 Zone ER Zone N NC C Clear IG PEL-N Air with grilles-between-the-glass PEL-N with integral grilles PEL-N Clear IG PEL-N Air with grilles-between-the-glass PEL-N with integral grilles PEL-N Clear IG PEL-N Air with grilles-between-the-glass PEL-N with integral grilles PEL-N Advanced Low-E IG PEL-N Argon with grilles-between-the-glass PEL-N with integral grilles PEL-N Advanced Low-E IG PEL-N Argon with grilles-between-the-glass PEL-N with integral grilles PEL-N Advanced Low-E IG PEL-N Argon with grilles-between-the-glass PEL-N with integral grilles PEL-N undefense Low-E IG PEL-N Argon with grilles-between-the-glass PEL-N with integral grilles PEL-N undefense Low-E IG PEL-N Argon with grilles-between-the-glass PEL-N with integral grilles PEL-N undefense Low-E IG PEL-N Argon with grilles-between-the-glass PEL-N with integral grilles PEL-N AdvancedComfort Low-E IG PEL-N Argon with grilles-between-the-glass PEL-N with integral grilles PEL-N AdvancedComfort Low-E IG PEL-N Argon with grilles-between-the-glass PEL-N with integral grilles PEL-N AdvancedComfort Low-E IG PEL-N Argon with grilles-between-the-glass PEL-N with integral grilles PEL-N Naturalun Low-E IG PEL-N Argon with grilles-between-the-glass PEL-N with integral grilles PEL-N Naturalun Low-E IG PEL-N Argon with grilles-between-the-glass PEL-N with integral grilles PEL-N Naturalun Low-E IG PEL-N Argon with grilles-between-the-glass PEL-N with integral grilles PEL-N " Advanced Low-E IG PEL-N Argon with grilles-between-the-glass PEL-N with integral grilles PEL-N " undefense Low-E IG PEL-N Argon with grilles-between-the-glass PEL-N with integral grilles PEL-N " AdvancedComfort Low-E IG PEL-N Argon with grilles-between-the-glass PEL-N with integral grilles PEL-N " Naturalun Low-E IG PEL-N Argon with grilles-between-the-glass PEL-N with integral grilles PEL-N W-FW-6

7 GLAZING PERFORMANCE TOTAL UNIT Interior Glazed Rectangular and Curved hapes Glazing Thickness Type of Glazing NFRC Certified Product # Glass (mm) Ext. Int. Gap Fill U-Factor Performance Values 1 HGC VLT % CR haded Areas Meet ENERGY TAR Performance Criteria in Zones hown U.. Canada 2 Zone ER Zone TINTED GLAZING N NC C Bronze Advanced Low-E IG PEL-N Argon with grilles-between-the-glass PEL-N with integral grilles PEL-N Gray Advanced Low-E IG PEL-N Argon with grilles-between-the-glass PEL-N with integral grilles PEL-N Green Advanced Low-E IG PEL-N Argon with grilles-between-the-glass PEL-N with integral grilles PEL-N Reflective Bronze IG PEL-N Argon with grilles-between-the-glass PEL-N with integral grilles PEL-N " Bronze Advanced Low-E IG PEL-N Argon with grilles-between-the-glass PEL-N with integral grilles PEL-N " Gray Advanced Low-E IG PEL-N Argon with grilles-between-the-glass PEL-N with integral grilles PEL-N " Green Advanced Low-E IG PEL-N Argon with grilles-between-the-glass PEL-N with integral grilles PEL-N " Reflective Bronze IG PEL-N Argon with grilles-between-the-glass PEL-N with integral grilles PEL-N " Reflective Gray IG PEL-N Argon with grilles-between-the-glass PEL-N with integral grilles PEL-N R-Value = 1/U-Factor HGC = olar Heat Gain Coefficient VLT % = Visible Light Transmission CR = Condensation Resistance ER = Canadian Energy Rating Climate Zones (1) Glazing performance values are calculated based on NFRC 100, NFRC 200 and NFRC 500. ENERGY TAR values are updated to 2016 (Version 6) criteria. (2) The values shown are based on Canada's updated ENERGY TAR 2015 initiative. ee the Product Performance section for more detailed information or visit for Energy tar guidelines. W-FW-7

8 GLAZING PERFORMANCE TOTAL UNIT Interior Glazed Rectangular and Curved hapes Glazing Thickness NFRC Certified Product # Glass (mm) Gap Fill U-Factor Performance Values 1 HGC VLT % CR haded Areas Meet ENERGY TAR Performance Criteria in Zones hown Type of Glazing U.. Canada 2 Ext. Int. Zone ER Zone HIGH ALTITUDE GLAZING N NC C Advanced Low-E IG PEL-N Air with grilles-between-the-glass PEL-N with integral grilles PEL-N Advanced Low-E IG PEL-N Air with grilles-between-the-glass PEL-N with integral grilles PEL-N Advanced Low-E IG PEL-N Air with grilles-between-the-glass PEL-N with integral grilles PEL-N undefense Low-E IG PEL-N Air with grilles-between-the-glass PEL-N with integral grilles PEL-N undefense Low-E IG PEL-N Air with grilles-between-the-glass PEL-N with integral grilles PEL-N undefense Low-E IG PEL-N Air with grilles-between-the-glass PEL-N with integral grilles PEL-N AdvancedComfort Low-E IG PEL-N Air with grilles-between-the-glass PEL-N with integral grilles PEL-N AdvancedComfort Low-E IG PEL-N Air with grilles-between-the-glass PEL-N with integral grilles PEL-N AdvancedComfort Low-E IG PEL-N Air with grilles-between-the-glass PEL-N with integral grilles PEL-N Naturalun Low-E IG PEL-N Air with grilles-between-the-glass PEL-N with integral grilles PEL-N Naturalun Low-E IG PEL-N Air with grilles-between-the-glass PEL-N with integral grilles PEL-N Naturalun Low-E IG PEL-N Air with grilles-between-the-glass PEL-N with integral grilles PEL-N " Clear IG PEL-N Air with grilles-between-the-glass PEL-N with integral grilles PEL-N " Advanced Low-E IG PEL-N Air with grilles-between-the-glass PEL-N with integral grilles PEL-N " undefense Low-E IG PEL-N Air with grilles-between-the-glass PEL-N with integral grilles PEL-N " AdvancedComfort Low-E IG PEL-N Air with grilles-between-the-glass PEL-N with integral grilles PEL-N " Naturalun Low-E IG PEL-N Air with grilles-between-the-glass PEL-N with integral grilles PEL-N W-FW-8

9 GLAZING PERFORMANCE TOTAL UNIT Interior Glazed Triple-Pane Insulating Glass Glazing Thickness Type of Glazing NFRC Certified Product # Glass (mm) Ext. Mid. Int. Gap Fill U-Factor Performance Values 1 HGC VLT % CR haded Areas Meet ENERGY TAR Performance Criteria in Zones hown U.. Canada 2 Zone ER Zone N NC C /8" Decorative Glass (3) PEL-N Air /8" Advanced Low-E IG PEL-N Argon with grilles-between-the-glass PEL-N with integral grilles PEL-N /4" Advanced Low-E IG PEL-N Argon with grilles-between-the-glass PEL-N with integral grilles PEL-N /8" Advanced Low-E IG PEL-N Argon with grilles-between-the-glass PEL-N with integral grilles PEL-N /8" Advanced Low-E IG PEL-N Krypton with grilles-between-the-glass PEL-N with integral grilles PEL-N /4" Advanced Low-E IG PEL-N Krypton with grilles-between-the-glass PEL-N with integral grilles PEL-N /8" Advanced Low-E IG PEL-N Krypton with grilles-between-the-glass PEL-N with integral grilles PEL-N /8" undefense Low-E IG PEL-N Argon with grilles-between-the-glass PEL-N with integral grilles PEL-N /4" undefense Low-E IG PEL-N Argon with grilles-between-the-glass PEL-N with integral grilles PEL-N /8" undefense Low-E IG PEL-N Argon with grilles-between-the-glass PEL-N with integral grilles PEL-N /8" undefense Low-E IG PEL-N Krypton with grilles-between-the-glass PEL-N with integral grilles PEL-N /4" undefense Low-E IG PEL-N Krypton with grilles-between-the-glass PEL-N with integral grilles PEL-N /8" undefense Low-E IG PEL-N Krypton with grilles-between-the-glass PEL-N with integral grilles PEL-N /8" Naturalun Low-E IG PEL-N Argon with grilles-between-the-glass PEL-N with integral grilles PEL-N /4" Naturalun Low-E IG PEL-N Argon with grilles-between-the-glass PEL-N with integral grilles PEL-N /8" Naturalun Low-E IG PEL-N Argon with grilles-between-the-glass PEL-N with integral grilles PEL-N /8" Naturalun Low-E IG PEL-N Krypton with grilles-between-the-glass PEL-N with integral grilles PEL-N /4" Naturalun Low-E IG PEL-N Krypton with grilles-between-the-glass PEL-N with integral grilles PEL-N /8" Naturalun Low-E IG PEL-N Krypton with grilles-between-the-glass PEL-N with integral grilles PEL-N W-FW-9

10 GLAZING PERFORMANCE TOTAL UNIT Interior Glazed Triple-Pane Insulating Glass Glazing Thickness NFRC Certified Product # Glass (mm) Gap Fill U-Factor Performance Values 1 HGC VLT % CR haded Areas Meet ENERGY TAR Performance Criteria in Zones hown Type of Glazing U.. Canada 2 Ext. Mid. Int. Zone ER Zone HIGH ALTITUDE GLAZING N NC C /8" Advanced Low-E IG PEL-N Air with grilles-between-the-glass PEL-N with integral grilles PEL-N /4" Advanced Low-E IG PEL-N Air with grilles-between-the-glass PEL-N with integral grilles PEL-N /8" Advanced Low-E IG PEL-N Air with grilles-between-the-glass PEL-N with integral grilles PEL-N /8" undefense Low-E IG PEL-N Air with grilles-between-the-glass PEL-N with integral grilles PEL-N /4" undefense Low-E IG PEL-N Air with grilles-between-the-glass PEL-N with integral grilles PEL-N /8" undefense Low-E IG PEL-N Air with grilles-between-the-glass PEL-N with integral grilles PEL-N /8" Naturalun Low-E IG PEL-N Air with grilles-between-the-glass PEL-N with integral grilles PEL-N /4" Naturalun Low-E IG PEL-N Air with grilles-between-the-glass PEL-N with integral grilles PEL-N /8" Naturalun Low-E IG PEL-N Air with grilles-between-the-glass PEL-N with integral grilles PEL-N R-Value = 1/U-Factor HGC = olar Heat Gain Coefficient VLT % = Visible Light Transmission CR = Condensation Resistance ER = Canadian Energy Rating Climate Zones (1) Glazing performance values are calculated based on NFRC 100, NFRC 200 and NFRC 500. ENERGY TAR values are updated to 2016 (Version 6) criteria. (2) The values shown are based on Canada's updated ENERGY TAR 2015 initiative. ee the Product Performance section for more detailed information or visit for Energy tar guidelines. W-FW-10

11 GLAZING PERFORMANCE TOTAL UNIT Interior Glazed Hurricane-hield Impact-Resistant Glass Glazing Thickness NFRC Certified Product # Glass (mm) Gap Fill U-Factor Performance Values 1 HGC VLT % CR haded Areas Meet ENERGY TAR Performance Criteria in Zones hown Type of Glazing U.. Canada 2 Ext. Int. Zone ER Zone HURRICANEHIELD - LAMINATED IMPACT REITANT N NC C /16" GP clear single-laminated PEL-N NA NA /16" GP single-laminated with Low-E PEL-N NA NA " PVB clear laminated IG PEL-N air with grilles-between-the-glass PEL-N with integral grilles PEL-N " PVB Advanced Low-E IG PEL-N argon with grilles-between-the-glass PEL-N with integral grilles PEL-N " PVB undefense Low-E IG PEL-N argon with grilles-between-the-glass PEL-N with integral grilles PEL-N " GP clear laminated IG PEL-N air with grilles-between-the-glass PEL-N with integral grilles PEL-N " GP Advanced Low-E IG PEL-N argon with grilles-between-the-glass PEL-N with integral grilles PEL-N " GP undefense Low-E IG PEL-N argon with grilles-between-the-glass PEL-N with integral grilles PEL-N /4" GP clear laminated IG PEL-N air with grilles-between-the-glass PEL-N with integral grilles PEL-N /4" GP Advanced Low-E IG PEL-N argon with grilles-between-the-glass PEL-N with integral grilles PEL-N /4" GP undefense Low-E IG PEL-N argon with grilles-between-the-glass PEL-N with integral grilles PEL-N TINTED GLAZING - LAMINATED IMPACT REITANT 9/16" Bronze GP single-laminated PEL-N NA NA /16" Gray GP single-laminated PEL-N NA NA /16" Green GP single-laminated PEL-N NA air " Bronze PVB laminated IG PEL-N air " Gray PVB laminated IG PEL-N air " Green PVB laminated IG PEL-N air " Bronze GP laminated IG PEL-N air " Gray GP laminated IG PEL-N air " Green GP laminated IG PEL-N air /4" Bronze GP laminated IG PEL-N air /4" Gray GP laminated IG PEL-N air /4" Green GP laminated IG PEL-N air R-Value = 1/U-Factor HGC = olar Heat Gain Coefficient VLT % = Visible Light Transmission CR = Condensation Resistance ER = Canadian Energy Rating Climate Zones (1) Glazing performance values are calculated based on NFRC 100, NFRC 200 and NFRC 500. ENERGY TAR values are updated to 2016 (Version 6) criteria. (2) The values shown are based on Canada's updated ENERGY TAR 2015 initiative. ee the Product Performance section for more detailed information or visit for Energy tar guidelines. W-FW-11

12 GLAZING PERFORMANCE - TOTAL UNIT Exterior Glazed - Rectangular Glazing Thickness NFRC Certified Product # Glass (mm) Gap Fill U-Factor Performance Values 1 HGC VLT % CR haded Areas Meet ENERGY TAR Performance Criteria in Zones hown Type of Glazing U.. Canada 2 Ext. Int. Zone ER Zone EXTERIOR GLAZED N NC C /8" Advanced Low-E IG PEL-N argon with grilles-between-the-glass PEL-N /8" undefensetm Low-E IG PEL-N argon with grilles-between-the-glass PEL-N /8" AdvancedComfort Low-E IG PEL-N argon with grilles-between-the-glass PEL-N /8" Naturalun Low-E IG PEL-N argon with grilles-between-the-glass PEL-N TINTED GLAZING 1" Bronze Advanced Low-E IG PEL-N argon with grilles-between-the-glass PEL-N " Gray Advanced Low-E IG PEL-N argon with grilles-between-the-glass PEL-N " Green Advanced Low-E IG PEL-N argon with grilles-between-the-glass PEL-N HIGH ALTITUDE GLAZING 5/8" Advanced Low-E HA IG PEL-N air with grilles-between-the-glass PEL-N /8" undefense Low-E HA IG PEL-N air with grilles-between-the-glass PEL-N /8" AdvancedComfort Low-E HA IG PEL-N air with grilles-between-the-glass PEL-N /8" Naturalun Low-E HA IG PEL-N air with grilles-between-the-glass PEL-N R-Value = 1/U-Factor HGC = olar Heat Gain Coefficient VLT % = Visible Light Transmission CR = Condensation Resistance ER = Canadian Energy Rating Climate Zones (1) Glazing performance values are calculated based on NFRC 100, NFRC 200 and NFRC 500. ENERGY TAR values are updated to 2016 (Version 6) criteria. (2) The values shown are based on Canada's updated ENERGY TAR 2015 initiative. ee the Product Performance section for more detailed information or visit for Energy tar guidelines. W-FW-12

13 GRILLE TYPE Grilles Profiles INTEGRAL LIGHT TECHNOLOGY (Ogee ILT Grilles are available for Radius hapes only) Ogee Glaze Grilles Clad Exterior - Wood Interior (quare ILT Grilles are available for Architect eries Contemporary Rectangular hapes only) quare Grille Clad Exterior - Wood Interior 7/8" 1 1/4" 2" 7/8" 7/8" ILT 7/8" 1 1/4" 2" 7/8" ILT 1 1/4" ILT 2" ILT REMOVABLE INTERIOR PINE GRILLE Removable Interior Pine Grilles 1 1/4" 2" 1 1/4" 2" Traditional RMB 1 1/4" Traditional RMB 2" Traditional RMB 1 1/4" Colonial RMB 2" Colonial RMB GRILLE-BETWEEN-THE-GLA Contoured GBG Contoured GBG IMULATED-DIVIDED-LIGHT GRILLE imulated Divided Light 7/8" 7/8" 7/8" DL 7/8" DL with pacer (1) Available in Pine, Mahogany, or Douglas Fir to match complete unit. Rev. 8/15/2017 W-FW-13

14 GRILLE PATTERN Aluminum-Clad Exterior Curved hapes Below are examples of typical combination assemblies showing grille alignment of half circles and quarter circles over casements, hung, hinged and sliding doors. For specific information contact your local Pella sales representative. TYPICAL GRILLE PATTERN HALF AND QUARTER CIRCLE Casement Double-Hung Large Fixed Casement Double-Hung 2-Wide Casement 2-Wide Double-Hung 3-Wide Casement 3-Wide Double-Hung Fixed Door liding Patio Door Hinged Door 2-Panel Hinged Door ELLIPTICAL PRINGLINE FULL CIRCLE OVAL Elliptical pringline Circle 4-Lite Traditional 5-Lite with Rays 9-Lite with unburst 17-Lite with unburst Not all pattern scenarios are shown above. Actual pattern may differ depending on size, shape and grille spacing. ee Pella sales representative for actual patterns. W-FW-14

15 GRILLE PATTERN Aluminum-Clad Exterior Arch Heads Below are examples of typical combination assemblies showing grille alignment of arch heads over casements, hung, and hinged doors. For specific information contact your local Pella sales representative. FULL ARCH HEAD Double-Hung 2-Wide Double-Hung 3-Wide Double-Hung Large Fixed 2-Wide Large Fixed Double-Hung 2-Wide Double-Hung Fixed 2-Wide Fixed 3-Wide Fixed ingle Panel Hinged Door 2-Panel Hinged Door Fixed Panel 2-Panel Hinged Door Not all pattern scenarios are shown above. Actual pattern may differ depending on size, shape and grille spacing. ee Pella sales representative for actual patterns. W-FW-15

16 CURVED HAPE AND IZE Aluminum-Clad Exterior Interior Glazed Half Circle Quarter Circle Full Chord Partial Chord Full Elliptical Half Elliptical Oval Full Circle Full pringline Partial pringline Full Arch Head Partial Arch Head Cathedral / Gothic DECRIPTION FRAME RADIU WIDTH HEIGHT MIN. UNIT FRAME ANGLE Min. Max. Min. Max. Min. Max. Min. Other MAX. UNIT FRAME ANGLE MAX. QUARE FOOT- AGE Half Circle 12" 54" 24" 108" 50 Quarter Circle 12" 74" 12" 74" 38 Full pringline 12" 48" 24" 96" R + 8" 96" 8" 38 Half pringline 12" 96" 14" 96" R + 8" 96" 8" Full Chord 12" 150" 24" > 2 H 108" 10.5" (W/ 2)-1" > 0.24 W 40 < Partial Chord 2 12" 150" 17" > H 108" 10.5" 74" > 0.48 W 40 < Full Elliptical 12" 1 150" 24" 108" R " 38 Half Elliptical 12" 1 150" 14" 108" R " Full Arch Head 12" 150" 24" > 3 (H-) 108" H > 96" 8" Partial Arch Head 12" 150" 14" > 0.82 (H-) 108" 1.88 R H > 96" 8" Cathedral / Gothic 12" 150" 24" 108" H > 96" 8" Full Circle 3 12" 24" 24" 48" 38 Oval 3 tandard sizes only. 24" W x 36" H, 30" W x 48" H or 36" W x 60" H Miscellaneous Formulas VIIBLE GLA ACTUAL GLA CLAD Width = Frame 3-1/4" Height = Frame 3-1/4" Width = Frame 2" Height = Frame 2" For all shapes, calculate the area as if it were a rectangle. ( ) = Not applicable (1) Minor radius must begin at the baseline of the frame. (2) Project shape to full chord, using full chord width (W), calculate minimum height restrictions using full chord parameters. (3) Tempered glass is required for any units where glass dimensions exceed 48" To convert areas to square meters (m 2 ), multiply square feet by W-FW-16

17 CUTOM ANGLED HAPE AND IZE Aluminum-Clad Exterior Interior Glazed Pella angled and rectangular fixed frame direct set windows are available in custom shapes shown below. These windows may be installed in any orientation. For specifications, size limitations, and details on these units, contact your local Pella sales representative. Rectangle Equal Modified Rectangle/ Double-clipped corner Pentagon Isosceles Triangle Truncated Triangle Octagon Hexagon Left Right Left Right Left Right Left Right Trapezoid Modified Rectangle Clipped corner Right Triangle Parallelogram GLAZING FRAME DIMENION PANEL DIMENION Minimum ize Maximum ize 1 Minimum ize Maximum ize GLA 8" x 8" (203 x 203) 10' 0" 2 or 50.3 ft 2 (3 048) or (4.67 m 2 ) CLAD PANEL (AVAILABLE IN RECTANGULAR UNIT ONLY) 8" x 8" (203 x 203) 4' 2" x 8' 2" (1 270 x 2 489) 6" x 6" (152 x 152) 48" x 96" (1 219 x 2 438) Miscellaneous Formulas for Rectangular Units VIIBLE GLA ACTUAL GLA Visible Glass Width = Frame Width 3-1/4" Visible Glass Height = Frame Height 3-1/4" Actual Glass Width = Frame Width 2" Actual Glass Height = Frame Height 2" For all shapes, calculate the area as if it were a rectangle. ( ) = Not applicable (2) In one direction with frame area as specified (subject to glass availability). Keep frame dimension to the nearest 1/8". Corner angles for all shapes are minimum 20 and maximum 160. ee Performance Grade chart for size limitations. Glass width to height ratio maximums: annealed glass 1 to 5, tempered glass 1 to 10. (1) For all shapes, calculate the area of the unit as if it were rectangular. W-FW-17

18 IZE AND GLAZING OPTION Aluminum-Clad Exterior Exterior Glazed Rectangular hapes Exterior glazed windows are available as rectangles only. GLAZING FRAME DIMENION PANEL DIMENION Minimum ize Maximum ize 1 Minimum ize Maximum ize GLA 8" x 8" (203 x 203) 8' 0" 1 or 38.0 ft 2 (2 438) (3.53 m 2 ) CLAD PANEL 8" x 8" (203 x 203) 4' 2-3/8" x 8' 2-3/8" (1 280 x 2 499) 5-5/8" x 5-5/8" (143 x 143) 48" x 96" (1 219 x 2 438) Miscellaneous Formulas VIIBLE GLA ACTUAL GLA Visible Glass Width = Frame Width 3-3/8" Visible Glass Height = Frame Height 3-3/8" Actual Glass Width = Frame Width 2-3/8" Actual Glass Height = Frame Height 2-3/8" Designed for applications where exterior reglazing is necessary due to inaccessibility from the interior. Is not intended for initial field glazing. GLAZING OPTION TANDARD PECIAL CUTOM 2 Clear or Advanced Low-E Insulated Glass with Argon or Natural un Bronze, Gray, Green, Obscure Advanced Comfort, un Defense pandrel ( ) = Not applicable (1) In one direction with frame area as specified (subject to glass availability). (2) Consult your Pella representative for parameters and availability of custom glazings. W-FW-18

19 DEIGN DATA Aluminum-Clad Exterior Hurricanehield Impact-Resistant Glass ingle-pane Glazing Double-Pane Insulating Glass 9/16" GP 1" GP IG 1" GP HEAT TRENGTHENED IG 1-1/4" GP IG 1" PVB IG MAXIMUM PERFORMANCE GRADE 1 up to 21 sq ft of frame up to 36 sq ft of frame up to 48 sq ft of frame CERTIFICATION 1 Hallmark 411-H H H H H-670 FPA 2 FL20349 FL20349 FL20349 FL20349 FL20349 TDI 2 WIN-478 WIN-478 WIN-478 WIN-478 WIN-478 The use of fixed frame direct set windows is limited by product performance rating, design pressure load chart, installation method and glass thickness or type. ( ) Not Applicable (1) Maximum design pressure limited by unit testing or ATM E (H) and ATM E (D) All interior glazed units with Impact glazing are certified for wind zone 4, large missile rating D. (2) ome size exclusions apply. Rev. 4/3/2017 W-FW-19

20 DEIGN PREURE PERFORMANCE Aluminum-Clad Exterior: Interior Glazed Fin Installation Method - tandard / Non-Impact The use of fixed frame direct set windows is limited by product performance rating, design pressure load chart, installation method, mullion strength and glass thickness or type. ee mullion limitation and glass charts in the Installation and Performance section at PellaADM.com. Fixed Frames are available up to a maximum frame area of 50.3 ft 2 (4.67 m 2 ). Angled and Curved frames are measured as a rectangle. IMPORTANT: Glass must meet requirements of the glass charts and comply with the load chart. This chart below shows the maximum performance class and grade of the frame only when glazed with the appropriate glass thickness F-CW40 = PG40 F-CW50 = PG50 Frame Width or Height (inches) F-CW40 to F-AW40 1 F-CW50 to F-AW50 1 F-CW40 to F-AW Frame Width or Height (inches) (1) AAMA / WDMA F-AW rating can be obtained with the EnduraClad Plus protective finish with 70% fluoropolymer resin in a multi-step finish system. W-FW-20

21 ADVANCED DEIGN PREURE PERFORMANCE Aluminum-Clad Exterior: Interior Glazed Clip or crew-through-frame installation - tandard / Non-Impact The use of fixed frame direct set windows is limited by product performance rating, design pressure load chart, installation method, mullion strength and glass thickness or type. ee mullion limitation and glass charts in the Installation and Performance section at PellaADM.com. Fixed Frames are available up to a maximum frame area of 50.3 ft 2 (4.67 m 2 ). Angled and Curved frames measured as a rectangle. IMPORTANT: Glass must meet requirements of the glass charts and comply with the load chart. This chart below shows the maximum performance class and grade of the frame only when glazed with the appropriate glass thickness F-CW60 = PG60 F-CW90 = PG90 Frame Width or Height (inches) F-CW60 to F-AW60 1 F-CW90 to F-AW90 1 F-CW60 to F-AW Frame Width or Height (inches) (1) AAMA / WDMA F-AW rating can be obtained with the EnduraClad Plus protective finish with 70% fluoropolymer resin in a multi-step finish. AW rating is not applicable to impact product. W-FW-21

22 DETAILED PRODUCT DECRIPTION Aluminum-Clad Exterior Interior Glazed FRAME elect softwood, immersion treated with Pella s EnduraGuard wood protection formula in accordance with WDMA I..-4. The EnduraGuard formula includes three active ingredients for protection against the effects of moisture, decay, stains from mold and mildew. Plus, an additional ingredient adds protection against termite damage. Interior exposed surfaces are [clear pine] [mahogany] [douglas fir]. Exterior surfaces are clad with extruded aluminum. Components are assembled with screws, staples, and concealed corner locks. Curved glass stops are segmented. Curved head assembly shall be mitered at end where joined to non- curved frame members, screwed and sealed. Curved head assembly consists of solid wood core blocks bonded to stabilized wood fiber with water-resistant glue. Two sheets are laminated with veneers at interior. Overall frame depth is 5" (127mm) for a wall depth of 3-11/16" (94mm). Optional factory-applied jamb extensions available. Optional factory-applied EnduraClad exterior trim. GLAZING YTEM 1 Quality float glass complying with ATM C Custom and high altitude glazing available. Urethane-glazed [] [1"] dual-seal insulating glass [[annealed] [tempered]] [[clear] [Advanced Low-E] [undefense Low-E] [AdvancedComfort Low-E] [Naturalun Low-E] with argon]] [[bronze] [gray] [green] [obscure] Advanced Low-E with argon]. or Urethane-glazed [1-1/8"] [1-1/4"] [1-3/8"] triple-seal insulating glass [[annealed] [tempered]] [[Advanced Low-E] [Advanced Low-E] [undefense Low-E] [undefense Low-E] [Naturalun Low-E [Naturalun Low-E with [argon] [krypton]]. or Impact-Resistant Urethane-glazed 1" dual-seal impact-resistant insulating glass 1 [1" [GP] [PVB]] [1-1/4" GP]. [[tempered] [annealed]] Laminated exterior light is [[Advanced Low-E with argon] [undefense Low-E] [clear] [bronze] [gray] [green]]. Clear tempered interior light. or Urethane-glazed 9/16" GP laminated glass [hard coat Low-E] [bronze] [gray] [green] [clear]. EXTERIOR Extruded aluminum clad exteriors shall be finished with EnduraClad protective finish, in a multi-step, baked-on finish. Color is [standard] [custom] 2 or Extruded aluminum clad exteriors shall be finished with EnduraClad Plus protective finish with 70% fluoropolymer resin in a multi-step, baked-on finish. Color is [standard] [custom] 2. INTERIOR [Unfinished, ready for site finishing] [factory primed with one coat acrylic latex] [factory prefinished [White] [Linen White] [Bright White] [stain 2]]. OPTIONAL PRODUCT Grilles 5 Integral Light Technology grilles Traditional tyle Collection Interior grilles are [7/8"] [1-1/4"] [2" (traditional pattern only)] ogee profile that are solid [pine] [mahogany] [douglas fir]. Curved grilles may have visible finger joints. Interior surfaces are [unfinished, ready for site finishing] [factory primed] [pine: factory prefinished [White] [Linen White] [Bright White] [stain 2]]. Curved grilles may have visible finger joints. Exterior grilles are [7/8" ogee profile] [1-1/4" ogee profile] [2" ogee profile (traditional pattern only)] that are extruded aluminum. Insulating glass contains non-glare spacer between the panes of glass. Grilles are adhered to both sides of the insulating glass with VHB acrylic adhesive tape and aligned with the non-glare spacer. Grille pattern is [Traditional] [Prairie] [Top Row] [Cross] [unburst] [tarburst]. or Integral Light Technology grilles Contemporary tyle Collection (rectangular units only) Interior grilles are 7/8" square profile that are solid [pine] [mahogany] [douglas fir]. Interior surfaces are [unfinished, ready for site finishing] [factory primed] [pine: factory prefinished [White] [Linen White] [Bright White] [stain 2]]. Exterior grilles are 7/8" square profile that are extruded aluminum. Insulating glass contains non-glare spacer between the panes of glass. Grilles are adhered to both sides of the insulating glass with VHB acrylic adhesive tape and aligned with the non-glare spacer. Grille pattern is [Traditional] [Prairie] [Top Row] [Cross]. or imulated-divided-light grilles [with optional spacer] Interior grilles are 7/8" regular profile that are solid pine. Curved grilles may have visible finger joints. Interior surfaces are [unfinished, ready for site finishing] [factory prefinished [White] [Linen White] [Bright White] [stain 2]]. Exterior grilles are 7/8" regular profile extruded aluminum, color is [tandard 2]. Grilles permanently bonded to the interior and exterior of glass with VHB acrylic adhesive tape and are aligned with the optional spacer between the panes of insulating glass. Grille Pattern is [Traditional] [Prairie] [Top Row] [Cross] [unburst] [tarburst] Available only on units glazed with Low-E insulated glass with argon. or Roomside Removable Grilles [ Regular] [1-1/4" [Regular] [Colonial]] [2" [Regular] [Colonial]] profile with Traditional pattern that has removable solid pine wood bars steel-pinned at joints and fitted to glass stops with steel clips and tacks. Interior surface [unfinished, ready for site finishing] [factory primed] [pine: factory prefinished [White] [Linen White] [Bright White] [stain 2]]. Exterior surface [unfinished, ready for site finishing] [factory-primed]. or Grilles-Between-the-Glass 3 Insulating glass contains contoured aluminum grilles permanently installed between two panes of glass. Interior color is [White] [Black] [Tan 4] [Brown 4] [Putty 4] [Ivory] [Brickstone] [Harvest] [Cordovan]. Exterior color 6 is [tandard] 2 Grille pattern is [Traditional] [Prairie] [Cross] [Top Row] [unburst]. (1) Insulating glass with argon is Low-E coated (except high altitude). All other insulating glass (including high altitude Low-E) is air-filled. (2) Contact your local Pella sales representative for current color options. (3) Available in clear or Low-E insulating glass with argon, and obscure insulated glass. (4) Tan, Brown and Putty GBG colors are available in single-tone only (Brown/Brown, Tan/Tan or Putty/Putty) (Putty mono). (5) Certain grille types and patterns may have restrictions depending on unit size and shape, contact your local Pella sales representative for details. (6) Appearance of exterior grille color will vary depending on Low-E coating on glass. Rev. 8/10/2017 W-FW-22

23 DETAILED PRODUCT DECRIPTION Aluminum-Clad Exterior Exterior Glazed FRAME elect softwood, immersion treated with Pella s EnduraGuard wood protection formula in accordance with WDMA I..-4. The EnduraGuard formula includes three active ingredients for protection against the effects of moisture, decay, stains from mold and mildew. Plus, an additional ingredient adds protection against termite damage. Interior exposed surfaces are [clear pine] [mahogany] [douglas fir]. Exterior surfaces are clad with aluminum. Components are assembled with screws, staples, and concealed corner locks. Overall frame depth is 5" (127mm) for a wall depth of 3-11/16" (94mm). Optional factory-applied jamb extensions available. GLAZING YTEM 1 Quality float glass complying with ATM C Custom and high altitude glazing available. Butyl-glazed clear single-light with removable aluminum stops. or Urethane-glazed dual-seal insulating glass [[annealed] [tempered]] [[[clear] [[Advanced Low-E] [undefense Low-E] [AdvancedComfort Low-E] [Naturalun Low-E] with argon]] [[bronze] [gray] [green] Advanced Low-E with argon] with removable aluminum stops. EXTERIOR Aluminum-clad exteriors shall be finished with EnduraClad protective finish, in a multi-step, baked-on finish. Color is [standard] [custom] 2. or Aluminum-clad exteriors shall be finished with EnduraClad Plus protective finish with 70% fluoropolymer resin in a multi-step, baked-on finish. Color is [standard] [custom] 2. INTERIOR [Unfinished, ready for site finishing] [factory primed with one coat acrylic latex] [factory prefinished [White] [Linen White] [Bright White] [stain 2]]. OPTIONAL PRODUCT Grilles Roomside Removable Grilles [ Regular] [1-1/4" [Regular] [Colonial]] [2" [Regular] [Colonial]] profile with Traditional pattern that has removable solid wood bars steelpinned at joints and fitted to glass stops with steel clips and tacks. Interior [unfinished, ready for site finishing] [factory primed] [factory prefinished [White] [Linen White] [Bright White] [stain 2]]. Exterior [unfinished, ready for site finishing] [factory primed] [finish color matched to exterior cladding 4]. or Grilles-Between-the-Glass Insulating glass contains contoured aluminum grilles permanently installed between two panes of glass. Patterns are [Traditional] [Prairie] [Cross] [Top Row] [Custom Equally Divided]. Interior color is [White] [Black] [Tan 3] [Brown 3] [Putty 3] [Ivory] [Brickstone] [Harvest] [Cordovan]. Exterior color 4 is [standard] 2. (1) Insulating glass with argon is Low-E coated (except high altitude). All other insulating glass (including high altitude Low-E) is air-filled. (2) Contact your local Pella sales representative for current designs and color options. (3) Tan, Brown and Putty GBG colors are available in single-tone only (Brown/Brown, Tan/Tan or Putty/Putty). (4) Appearance of exterior grille color will vary depending on Low-E coating on glass. Rev. 7/24/2017 W-FW-23

24 UNIT ECTION CURVED HAPE Aluminum-Clad Exterior Interior Glazed CH 1 3/16" [31] 3 [96] IG Triple Pane 1 1/8" IG CLAD PANEL CH CIRCLE or ARCH HEAD HAPE ILL CH CIRCLE or ARCH HEAD HAPE ILL CH CIRCLE or ARCH HEAD HAPE ILL 5" [127] 5" [127] 5" [127] AMB AMB AMB Optional Fold-out Installation Fin 1 5/8" [41] 1 5/8" [41] Optional Fold-out Installation Fin 1 5/8" [41] HORIZONTAL OINING MULLION DIRECT ET / CAEMENT HORIZONTAL OINING MULLION DIRECT ET / DOUBLE-HUNG HORIZONTAL OINING MULLION DIRECT ET / LIDING DOOR HORIZONTAL OINING MULLION DIRECT ET / IN-WING DOOR cale 3" = 1' 0" All dimensions are approximate. W-FW-24

25 UNIT ECTION CURVED HAPE Aluminum-Clad Exterior with Hurricanehield Impact-Resistant Glass ingle-laminated and Laminated Insulating Glass CH 1 3/16" [31] 3 [96] 9/16" INGLE LAMINATED 1" Impact IG 1-1/4" Impact IG CH CIRCLE or ARCH HEAD HAPE ILL CH CIRCLE or ARCH HEAD HAPE ILL CH CIRCLE or ARCH HEAD HAPE ILL 5" [127] 5" [127] 5" [127] AMB AMB AMB Optional Fold-out Installation Fin 1 5/8" [41] 1 5/8" [41] Optional Fold-out Installation Fin 1 5/8" [41] cale 3" = 1' 0" All dimensions are approximate. W-FW-25