Architect Series Traditional

Transcription

1 SECTION DIRECTORY rchitect Series Traditional roduct Selection Guide Size and erformance Data...BF-2 Glazing erformance...bf-4 Grille Types...BF-8 Design Data Vent...BF-10 Detailed roduct Descriptions...BF-15 Unit Sections...BF-16 The information published in this document is believed to be accurate at the time of publication. However, because we are constantly working to improve our products, specifications are subject to change without notice. Consult your local ella representative for up-to-date product information. ella 2018 rchitectural Design Manual Division 08 Openings Windows and Doors BF-1

2 rchitect Series Traditional RODUCT SELECTION GUIDE Size and erformance Data Out-Swing In-Swing ERFORMNCE DT 1 Standard Sill Meets or Exceeds M/WDM Ratings R25 not rated ir Infiltration 0.15 not rated DOORS 8' 7/8" TLL ND UNDER Water Resistance 25 not rated Design ressure 25 not rated Low rofile Sill and Flush Sill Meets or Exceeds M/WDM Ratings not rated not rated ir Infiltration not rated not rated Water Resistance not rated not rated Design ressure not rated not rated Standard Sill Meets or Exceeds M/WDM Ratings R15 not rated ir Infiltration 0.15 not rated DOORS OVER 8' 7/8" TLL Water Resistance 15 not rated Design ressure 15 not rated Low rofile Sill and Flush Sill Meets or Exceeds M/WDM Ratings not rated not rated ir Infiltration not rated not rated Water Resistance not rated not rated Design ressure not rated not rated OTHER ERFORMNCE CRITERI Forced Entry Resistance Level (Minimum Security Grade) 2 40 not rated (1) Maximum performance for panel size up to 39" wide when glazed with the appropriate glass thickness. See Design Data pages in this section for specific product performance. Contact your local sales representative for complete information. (2) The higher the level, the greater the product s ability to resist forced entry. ella 2018 rchitectural Design Manual Division 08 Openings Windows and Doors BF-2

3 rchitect Series Traditional RODUCT SELECTION GUIDE Size and erformance Data STNDRD GLZING Glazing Type Dual-ane Insulating Glass Triple-ane Insulating Glass Insulated Glass Options/Low-E Types SunDefense Low-E dvancedcomfort Low-E dvanced Low-E NaturalSun Low-E Clear (no Low-E coating) dditional Glass Options OTIONS / UGRDES Obscure Glass 1 Tempered Glass Gas Fill/High ltitude rgon WOOD TYES ine EXTERIOR EnduraClad protective finish Tinted Glass (Bronze, Gray and Green) Noise reduction laminated glass (non-impact) Krypton (vailable with triple-pane glazing only) High altitude (with air) Mahogany, Douglas Fir EnduraClad lus protective finish Cladding Colors 1 27 Standard colors Custom Colors INTERIOR Unfinished wood Factory primed, Factory prefinished paint 1, Factory prefinished stain 1 HRDWRE assage Door Handle Set White, Champagne, Brown, Matte Black Locking Sensors Kwikset lock cylinder Dualpoint Lock Handle White, Brown, Matte Black, Satin Nickel Hinges White, Brown, Matte Black, Satin Nickel GRILLES Integral Light Technology Grilles Bright Brass, ntique Brass, olished Chrome, olished Nickel, Distressed Bronze, Distressed Nickel, Satin Nickel Integrated sensors, SmartKey lock cylinder Bright Brass and ntique Brass (interior only), olished Chrome Bright Brass and ntique Brass (interior only), olished Chrome Traditional, rairie, Top Row, Cross, New England, Victorian, Custom Roomside Removable Grilles Traditional, rairie, Top Row, Cross, New England, Victorian, Custom Grilles-Between-the-Glass Traditional, rairie, Cross, Top Row 1, Custom-Equally Divided (1) Contact your local ella sales representative for current designs and color options. ella 2018 rchitectural Design Manual Division 08 Openings Windows and Doors BF-3

4 rchitect Series Traditional GLZING ERFORMNCE - TOTL UNIT luminum-clad Exterior In-Swing Standard Sill Dual-ane Glazing Glazing Thickness Type of Glazing NFRC Certified roduct # Ext. Glass (mm) Int. Gap Fill U-Factor erformance Values 1 SHGC VLT % CR Shaded reas Meet ENERGY STR erformance Criteria in Zones Shown U. S. Canada 2 Zone ER Zone VENT N NC SC S /16" Clear IG EL-N air with grilles-between-the-glass EL-N with integral grilles EL-N /16" dvanced Low-E IG EL-N argon with grilles-between-the-glass EL-N with integral grilles EL-N /16" SunDefense Low-E IG EL-N argon with grilles-between-the-glass EL-N with integral grilles EL-N /16" dvancedcomfort Low-E IG EL-N argon with grilles-between-the-glass EL-N with integral grilles EL-N /16" NaturalSun Low-E IG EL-N argon with grilles-between-the-glass EL-N with integral grilles EL-N TINTED GLZING 13/16" Bronze dvanced Low-E IG EL-N argon with grilles-between-the-glass EL-N with integral grilles EL-N /16" Gray dvanced Low-E IG EL-N argon with grilles-between-the-glass EL-N with integral grilles EL-N /16" Green dvanced Low-E IG EL-N argon with grilles-between-the-glass EL-N with integral grilles EL-N HIGH LTITUDE GLZING 13/16" dvanced Low-E IG EL-N air with grilles-between-the-glass EL-N with integral grilles EL-N /16" SunDefense Low-E IG EL-N air with grilles-between-the-glass EL-N with integral grilles EL-N /16" dvancedcomfort Low-E IG EL-N air with grilles-between-the-glass EL-N with integral grilles EL-N /16" NaturalSun Low-E IG EL-N air with grilles-between-the-glass EL-N with integral grilles EL-N R-Value = 1/U-Factor SHGC = Solar Heat Gain Coefficient VLT % = Visible Light Transmission CR = Condensation Resistance ER = Canadian Energy Rating Climate Zones (1) Glazing performance values are calculated based on NFRC 100, NFRC 200 and NFRC 500. ENERGY STR values are updated to 2016 (Version 6) criteria. (2) The values shown are based on Canada's updated ENERGY STR initiative. For center-glass values, see the roduct erformance section. See the roduct erformance section for more detailed information or visit for Energy Star guidelines. ella 2018 rchitectural Design Manual Division 08 Openings Windows and Doors BF-4

5 rchitect Series Traditional GLZING ERFORMNCE - TOTL UNIT luminum-clad Exterior In-Swing Standard Sill Triple-ane Glazing Glazing Thickness Type of Glazing NFRC Certified roduct # Glass (mm) Ext. Mid. Int. Gap Fill U-Factor erformance Values 1 SHGC VLT % CR Shaded reas Meet ENERGY STR erformance Criteria in Zones Shown U. S. Canada 2 Zone ER Zone VENT N NC SC S " dvanced Low-E IG EL-N argon with grilles-between-the-glass EL-N with integral grilles EL-N " dvanced Low-E IG EL-N Krypton with grilles-between-the-glass EL-N with integral grilles EL-N " SunDefense Low-E IG EL-N argon with grilles-between-the-glass EL-N with integral grilles EL-N " SunDefense Low-E IG EL-N Krypton with grilles-between-the-glass EL-N with integral grilles EL-N " NaturalSun Low-E IG EL-N argon with grilles-between-the-glass EL-N with integral grilles EL-N " NaturalSun Low-E IG EL-N Krypton with grilles-between-the-glass EL-N with integral grilles EL-N HIGH LTITUDE GLZING 1" dvanced Low-E IG EL-N air with grilles-between-the-glass EL-N with integral grilles EL-N " SunDefense Low-E IG EL-N air with grilles-between-the-glass EL-N with integral grilles EL-N " NaturalSun Low-E IG EL-N air with grilles-between-the-glass EL-N with integral grilles EL-N R-Value = 1/U-Factor SHGC = Solar Heat Gain Coefficient VLT % = Visible Light Transmission CR = Condensation Resistance ER = Canadian Energy Rating Climate Zones (1) Glazing performance values are calculated based on NFRC 100, NFRC 200 and NFRC 500. ENERGY STR values are updated to 2016 (Version 6) criteria. (2) The values shown are based on Canada's updated ENERGY STR initiative. For center-glass values, see the roduct erformance section. See the roduct erformance section for more detailed information or visit for Energy Star guidelines. ella 2018 rchitectural Design Manual Division 08 Openings Windows and Doors BF-5

6 rchitect Series Traditional GLZING ERFORMNCE - TOTL UNIT luminum-clad Exterior Out-Swing Standard Sill Dual-ane Glazing Glazing Thickness Type of Glazing NFRC Certified roduct # Ext. Glass (mm) Int. Gap Fill U-Factor erformance Values 1 SHGC VLT % CR Shaded reas Meet ENERGY STR erformance Criteria in Zones Shown U. S. Canada 2 Zone ER Zone VENT N NC SC S /16" Clear IG EL-N air with grilles-between-the-glass EL-N with integral grilles EL-N /16" dvanced Low-E IG EL-N argon with grilles-between-the-glass EL-N with integral grilles EL-N /16" SunDefense Low-E IG EL-N argon with grilles-between-the-glass EL-N with integral grilles EL-N /16" dvancedcomfort Low-E IG EL-N argon with grilles-between-the-glass EL-N with integral grilles EL-N /16" NaturalSun Low-E IG EL-N argon with grilles-between-the-glass EL-N with integral grilles EL-N TINTED GLZING 13/16" Bronze dvanced Low-E IG EL-N argon with grilles-between-the-glass EL-N with integral grilles EL-N /16" Gray dvanced Low-E IG EL-N argon with grilles-between-the-glass EL-N with integral grilles EL-N /16" Green dvanced Low-E IG EL-N argon with grilles-between-the-glass EL-N with integral grilles EL-N HIGH LTITUDE GLZING 13/16" dvanced Low-E IG EL-N air with grilles-between-the-glass EL-N with integral grilles EL-N /16" SunDefense Low-E IG EL-N air with grilles-between-the-glass EL-N with integral grilles EL-N /16" dvancedcomfort Low-E IG EL-N air with grilles-between-the-glass EL-N with integral grilles EL-N /16" NaturalSun Low-E IG EL-N air with grilles-between-the-glass EL-N with integral grilles EL-N R-Value = 1/U-Factor SHGC = Solar Heat Gain Coefficient VLT % = Visible Light Transmission CR = Condensation Resistance ER = Canadian Energy Rating Climate Zones (1) Glazing performance values are calculated based on NFRC 100, NFRC 200 and NFRC 500. ENERGY STR values are updated to 2016 (Version 6) criteria. (2) The values shown are based on Canada's updated ENERGY STR initiative. For center-glass values, see the roduct erformance section. See the roduct erformance section for more detailed information or visit for Energy Star guidelines. ella 2018 rchitectural Design Manual Division 08 Openings Windows and Doors BF-6

7 rchitect Series Traditional GLZING ERFORMNCE - TOTL UNIT luminum-clad Exterior Out-Swing Standard Sill Triple-ane Glazing Glazing Thickness Type of Glazing NFRC Certified roduct # Glass (mm) Ext. Mid Int. Gap Fill U-Factor erformance Values 1 SHGC VLT % CR Shaded reas Meet ENERGY STR erformance Criteria in Zones Shown U. S. Canada 2 Zone ER Zone VENT N NC SC S " dvanced Low-E IG EL-N argon with grilles-between-the-glass EL-N with integral grilles EL-N " dvanced Low-E IG EL-N Krypton with grilles-between-the-glass EL-N with integral grilles EL-N " SunDefense Low-E IG EL-N argon with grilles-between-the-glass EL-N with integral grilles EL-N " SunDefense Low-E IG EL-N Krypton with grilles-between-the-glass EL-N with integral grilles EL-N " NaturalSun Low-E IG EL-N argon with grilles-between-the-glass EL-N with integral grilles EL-N " NaturalSun Low-E IG EL-N Krypton with grilles-between-the-glass EL-N with integral grilles EL-N HIGH LTITUDE GLZING 1" dvanced Low-E IG EL-N air with grilles-between-the-glass EL-N with integral grilles EL-N " SunDefense Low-E IG EL-N air with grilles-between-the-glass EL-N with integral grilles EL-N " NaturalSun Low-E IG EL-N air with grilles-between-the-glass EL-N with integral grilles EL-N R-Value = 1/U-Factor SHGC = Solar Heat Gain Coefficient VLT % = Visible Light Transmission CR = Condensation Resistance ER = Canadian Energy Rating Climate Zones (1) Glazing performance values are calculated based on NFRC 100, NFRC 200 and NFRC 500. ENERGY STR values are updated to 2016 (Version 6) criteria. (2) The values shown are based on Canada's updated ENERGY STR initiative. For center-glass values, see the roduct erformance section. See the roduct erformance section for more detailed information or visit for Energy Star guidelines. ella 2018 rchitectural Design Manual Division 08 Openings Windows and Doors BF-7

8 GRILLE TYES Typical Grille rofiles rchitect Series Traditional Integral Light Technology Ogee Glaze Grilles Clad Exterior - Wood Interior Contoured luminum - Grilles-Between-the-Glass 7/8" 1 1/4" 2" 3/4" 3/4" 3/4" Contoured GBG 3/4" Contoured GBG 7/8" 1 1/4" 2" 7/8" ILT 1 1/4" ILT 2" ILT Removable Interior ine Grilles 3/4" 1 1/4" 2" 1 1/4" 2" 3/4" Traditional RMB 1 1/4" Traditional RMB 2" Traditional RMB 1 1/4" Colonial RMB 2" Colonial RMB Interior wood ILT grilles available in ine, Mahogany or Douglas Fir to match complete unit. ella 2018 rchitectural Design Manual Division 08 Openings Windows and Doors BF-8

9 GRILLE TYES Typical Grille atterns rchitect Series Traditional Integral Light Technology Grilles and removable Grilles RIRIE LITE TTERNS VG VG VG VG Standard corner lite dimension for rairie patterns = 3-1/2" VG. Wide Stile Transom Integral Light Technology Grilles 9-Lite available in all special sizes. 12-Lite available at 8' height; other heights available per custom drawing. 14-Lite available in units > 2' 1-1/2" width. Standard Stile Transom SIDELIGHT rairie (9-Lite) rairie (9-Lite) rairie (12-Lite) rairie (12-Lite) rairie (14-Lite) Removable Grilles 9-Lite available in units < 7' 0-1/2" height. rairie in heights > 7' 0-1/4" will have 12 Lites. OTHER VILBLE TTERNS VG Top Row Standard visible glass to separator bar = 14" or half of total visible glass height, whichever is smaller. Cross Standard visible glass to separator bar = one-quarter of total visible glass height. New England Traditional Top Row Cross New England Victorian Standard visible glass to separator bar = half of total visible glass height. Grilles-Between-the-Glass RIRIE LITE TTERNS VG VG rairie Standard corner lite dimension = 3-1/2" VG. 9-Lite available in units < 7' 0-3/4" height. rairie in heights > 7' 0-1/2" will have 12 lites. 12-Lite available in units 7' 2" height. Cross rairie (9-Lite) rairie (12-Lite) rairie (12-Lite) rairie (14-Lite) Horizontal bar is 1/4 of visible glass from the top in door panels. Not available in transoms. OTHER VILBLE TTERNS VG Top Row Horizontal bar may be ordered 12", 14" or 16" from the top VG. Transoms with frame heights 21", the horizontal bar will be positioned at 1/2 the visible glass height. Top Row not available in transoms with frame height <21". Traditional Cross Top Row VG = Visible Glass Lite dimensions noted can vary. Custom configurations are available; for details contact your local ella sales representative. ella 2018 rchitectural Design Manual Division 08 Openings Windows and Doors BF-9

10 DESIGN DT luminum-clad Exterior rchitect Series Traditional HRDWRE HNE HEIGHT FRME HEIGHT NEL WIDTH NEL HEIGHT Minimum Maximum Minimum Maximum Minimum Maximum TYICL 55-1/2" 119-1/2" 14-1/4" 42" " GRETER THN 54" 76" 119-1/2" 14-1/4" 42" 72-1/4" 116" For low profile and flush sill, subtract.25" from height. Rough Opening Width FW + 1 Rough Opening Height FH anel Height: Standard Sill anel Height: Low rofile (D) Sill anel Height: Flush Sill FH FH FH anel rojection anel width - 3.0" Clear Opening (approximate) anel Stack One-Side No Handle Set (approx) anel Stack One-Side w/ Handle Set (approx) anel Stack One-Side w/ Handle Set (approx) FW - anel Stack - 3 # anels * 2.25" # anels * # anels * KEY NEL WIDTH One Way No assage Door One Way with assage Door Split No assage Door Split with assage Door (FW-(T - 1) * ) / T (FW-(T - 1) * ) / T (FW-(T - 2) * ) / T (FW-(T - 2) * ) / T FW = Frame Width FH = Frame Height T = Total # of panels W = anel Width H = anel Height ROW = Rough Opening Width ROH = Rough Opening Height ella 2018 rchitectural Design Manual Division 08 Openings Windows and Doors BF-10

11 DESIGN DT anel Configurations rchitect Series Traditional NEL CONFIGURTION SSGE-DOOR HNDING Maximum Frame size (inches) FRME WIDTH FRME HEIGHT erformance Class and Grade 1 OUTSWING STNDRD SILL OUTSWING LOW ROFILE & FLUSH SILL INSWING LL SILL 2-NEL 0L-2R 2L-0R 0L-2R 2L-0R R25 NC NC R15 NC NC NC NC NC R25 NC NC 3-NEL 0L-3R 1L-2R 3L-0R 2L-1R 0L-3R 3L-0R 1L-2R, 2L-1R ctive Right, ctive Left ctive Left, ctive Right R15 NC NC NC NC NC R25 NC NC R15 NC NC NC NC NC R25 NC NC 4L-0R, 0L-4R R15 NC NC 0L-4R 4L-0R NC NC NC 4-NEL 1L-3R 3L-1R 1L-3R, 3L-1R ctive Left/assive Right, assive Left/ctive Right R25 NC NC R15 NC NC NC NC NC R25 NC NC 2L-2R 2L-2R R15 NC NC NC NC NC R25 NC NC 0L-5R 5L-0R 0L-5R, 5L-0R ctive Right, ctive Left R15 NC NC NC NC NC 5-NEL 1L-4R 4L-1R 1L-4R, 4L-1R ctive Left, ctive Right R25 NC NC R15 NC NC NC NC NC R25 NC NC 2L-3R 3L-2R 2L-3R, 3L-2R ctive Right, ctive Left R15 NC NC NC NC NC "" indicates the ctive assage Door where applicable. "" indicates a swinging assive Door where handle set matches assage Door. (1) Maximum performance for panels up to 39" wide when glazed with the appropriate glass thickness. Those noted as NC are not M/WDM performance certified. Custom sized panels in 1/8" increments. Doors are configured from left to right as viewed from the exterior. Out-swing doors are shown, In-swing doors are available in same configurations. Minimum to Maximum door width dimensions refers to frame to frame dimension. Contact your local ella sales representative for more information. ella 2018 rchitectural Design Manual Division 08 Openings Windows and Doors BF-11

12 DESIGN DT anel Configurations rchitect Series Traditional NEL CONFIGURTION SSGE-DOOR HNDING Maximum Frame size (inches) FRME WIDTH FRME HEIGHT erformance Class and Grade 1 OUTSWING STNDRD SILL OUTSWING LOW ROFILE & FLUSH SILL INSWING LL SILL 0L-6R 6L-0R 6L-0R, 0L-6R R25 NC NC R15 NC NC Not Rated NC NC 6-NEL 1L-5R 2L-4R 5L-1R 4L-2R 1L-5R, 5L-1R 2L-4R, 4L-2R ctive Left/assive Right, assive Left/ctive Right R25 NC NC R15 NC NC Not Rated NC NC R25 NC NC R15 NC NC Not Rated NC NC 3L-3R 3L-3R Option of ctive/assive or assive/ctive R25 NC NC R15 NC NC Not Rated NC NC 0L-7R 7L-0R 0L-7R, 7L-0R ctive Right, ctive Left R25 NC NC R15 NC NC Not Rated NC NC 7-NEL 1L-6R 2L-5R 6L-1R 5L-2R 1L-6R, 6L-1R 2L-5R, 5L-2R ctive Left, ctive Right ctive Right, ctive Left R25 NC NC R15 NC NC Not Rated NC NC R25 NC NC R15 NC NC Not Rated NC NC 3L-4R 4L-3R 3L-4R, 4L-3R ctive Left, ctive Right R25 NC NC R15 NC NC Not Rated NC NC "" indicates the ctive assage Door where applicable. "" indicates a swinging assive Door where handle set matches assage Door. (1) Maximum performance for panels up to 39" wide when glazed with the appropriate glass thickness. Those noted as NC are not M/WDM performance certified. Custom sized panels in 1/8" increments. Doors are configured from left to right as viewed from the exterior. Out-swing doors are shown, In-swing doors are available in same configurations. Minimum to Maximum door width dimensions refers to frame to frame dimension. Contact your local ella sales representative for more information. ella 2018 rchitectural Design Manual Division 08 Openings Windows and Doors BF-12

13 DESIGN DT anel Configurations rchitect Series Traditional NEL CONFIGURTION SSGE-DOOR HNDING Maximum Frame size (inches) FRME WIDTH FRME HEIGHT erformance Class and Grade 1 OUTSWING STNDRD SILL OUTSWING LOW ROFILE & FLUSH SILL INSWING LL SILL 0L-8R 8L-0R 0L-8R, 8L-0R 1L-7R 7L-1R 1L-7R, 7L-1R ctive Left/assive Right, assive Left/ctive Right 8-NEL 2L-6R 6L-2R 2L-6R, 6L-2R 3L-5R 5L-3R 3L-5R, 5L-3R Option of ctive/assive or assive/ctive 4L-4R 4L-4R 0L-9R 9L-0R 0L-9R, 9L-0R ctive Right, ctive Left 1L-8R 8L-1R 1L-8R, 8L-1R ctive Left, ctive Right 9-NEL 2L-7R 7L-2R 2L-7R, 7L-2R ctive Right, ctive Left 3L-6R 6L-3R 3L-6R, 6L-3R ctive Left, ctive Right 4L-5R 5L-4R 4L-5R, 5L-4R ctive Right, ctive Left "" indicates the ctive assage Door where applicable. "" indicates a swinging assive Door where handle set matches assage Door. (1) Maximum performance for panels up to 39" wide when glazed with the appropriate glass thickness. Those noted as NC are not M/WDM performance certified. Custom sized panels in 1/8" increments. Doors are configured from left to right as viewed from the exterior. Out-swing doors are shown, In-swing doors are available in same configurations. Minimum to Maximum door width dimensions refers to frame to frame dimension. Contact your local ella sales representative for more information. ella 2018 rchitectural Design Manual Division 08 Openings Windows and Doors BF-13

14 DESIGN DT anel Configurations rchitect Series Traditional NEL CONFIGURTION SSGE-DOOR HNDING Maximum Frame size (inches) FRME WIDTH FRME HEIGHT erformance Class and Grade 1 OUTSWING STNDRD SILL OUTSWING LOW ROFILE & FLUSH SILL INSWING LL SILL 0L-10R 10L-0R 0L-10R, 10L-0R 1L-9R 9L-1R 1L-9R, 9L-1R ctive Left/assive Right, assive Left/ctive Right 10-NEL 2L-8R 3L-7R 8L-2R 7L-3R 2L-8R, 8L-2R 3L-7R, 7L-3R Option of ctive/assive or assive/ctive 4L-6R 6L-4R 4L-6R, 6L-4R 5L-5R 5L-5R Option of ctive/assive or assive/ctive "" indicates the ctive assage Door where applicable. "" indicates a swinging assive Door where handle set matches assage Door. (1) Maximum performance for panels up to 39" wide when glazed with the appropriate glass thickness. Those noted as NC are not M/WDM performance certified. Custom sized panels in 1/8" increments. Doors are configured from left to right as viewed from the exterior. Out-swing doors are shown, In-swing doors are available in same configurations. Minimum to Maximum door width dimensions refers to frame to frame dimension. Contact your local ella sales representative for more information. ella 2018 rchitectural Design Manual Division 08 Openings Windows and Doors BF-14

15 rchitect Series Traditional DETILED RODUCT DESCRITIONS luminum-clad Exterior Traditional Bifold doors FRME Head and jamb use select softwood, immersion treated with ella s EnduraGuard wood protection formula in accordance with WDM I.S.-4. The EnduraGuard formula includes three active ingredients for protection against the effects of moisture, decay, stains from mold and mildew. lus, an additional ingredient adds protection against termite damage. Interior exposed surfaces are [pine] [mahogany] [douglas fir], edge-banded on straight members. Exterior surfaces are thermally broken clad with aluminum at the head and jambs. Outswing wall depth is 4-11/16" with frame depth of 6" (152 mm). In-swing wall depth is 6-9/16" (167 mm) with frame depth of 6-9/16" (167 mm). Factory-finished jamb extensions available ordered separately from unit and field-applied. Sill is [2-5/16" standard profile] [1/2" low profile] [flush profile]. Material and finish is thermally broken extruded aluminum with Bronze anodized finish. Out-swing has unfinished oak threshold ready for field finishing. Out-swing has integrated installation fin is solid aluminum extruded with exterior head and jamb covers. Frame width greater than 312" (7 925mm)] will receive two (2) pieces for head and two (2) pieces for sill that require splicing during installation. DOOR NELS Select softwood, immersion treated with ella s EnduraGuard wood protection formula in accordance with WDM I.S.-4. The EnduraGuard formula includes three active ingredients for protection against the effects of moisture, decay, stains from mold and mildew. lus, an additional ingredient adds protection against termite damage. Interior exposed surfaces are veneered with [clear pine] [mahogany] [douglas fir]. Exterior surfaces are clad with extruded aluminum. anel stiles and rails are three-ply construction, randomly finger-jointed blocks laminated with water-resistant glue and veneered on both sides. Units over 8' height have panel stiles constructed with LVL core with finger-jointed edge bands on both sides and veneered on both faces. Corners are urethane-silicone hybrid sealed and secured with metal fasteners. anel thickness is 2-1/16" (52mm). anel exterior profile is ogee, interior profile is ogee. WETHERSTRIING Foam leaf seal along jambs, head, and sill of frame. Foam leaf seal along astragal. Mohair along the head of frame. Foam leaf seal along the stiles of panel. Bristle rainscreen along bottom of panel. Neoprene foam strips between off-set panel hinges. GLZING SYSTEM 1 Quality fully-tempered float glass complying with STM C Custom and high altitude glazing available. Urethane-glazed 13/16" dual-seal insulating glass [clear] [obscure] [[dvanced Low- E] [SunDefense Low-E] [dvancedcomfort Low-E] [NaturalSun Low-E] with argon]] [[bronze] [gray] [green] dvanced Low-E with argon]. or Silicone-glazed 1" triple-pane, dual-seal insulating glass [dvanced Low-E] [SunDefense Low-E] [NaturalSun Low-E] with [argon] [krypton]]. or Silicone-glazed dual-pane 13/16" dual-seal non-impact laminated glass [clear] [[dvanced Low-E] [SunDefense Low-E] with rgon]] [[bronze] [gray] [green] dvanced Low-E [with argon]]. EXTERIOR luminum-clad exteriors shall be finished with EnduraClad protective finish on panels, in a multi-step, baked-on finish. luminum-clad exterior frame shall be finished in accordance with M 2604 standards. Color is [Standard 2] [Custom 2]. or luminum-clad exteriors shall be finished with EnduraClad lus protective finish with 70% fluoropolymer resin on panels, in a multi-step, baked-on finish. luminum-clad exterior frame shall be finished in accordance with M 2605 standards. Color is [Standard 2] [Custom 2]. INTERIOR [Unfinished, ready for site finishing] [factory primed with one coat acrylic latex] [factory prefinished [paint] [stain] 1]. [Unfinished, ready for site finishing] [factory primed with one coat acrylic latex] [factory prefinished [paint] [stain] 1]. HRDWRE Hinges Doors will have a Top ivot Hinge, Middle ivot Hinge and Bottom ivot Hinge connecting a panel to the jamb where appropriate. Doors up to 8' 7/8" frame height will have a top hinge, bottom hinge, and one (1) middle hinge connecting adjacent panels. Doors over 8' 7/8" frame height will have a top hinge, bottom hinge, and two (2) middle hinges connecting adjacent panels. Finish where hinge barrel faces interior is [baked enamel [White] [Brown] [Black] [Satin Nickel]] [plated [Bright Brass] [ntique Brass] [olished Chrome]]. Finish where hinge barrel faces exterior is [baked enamel [White] [Brown] [Black] [Satin Nickel]] [plated olished Chrome]. assage Door Locks (when applicable) Mortised and keyed multi-point locking system, center deadbolt and shoot-bolts at head and sill will engage simultaneously. Doors 8' 0" frame height and below will have one (1) strike at the head, one (1) strike at the sill and one (1) center deadbolt. Doors over 8' 0" frame height up to and including 10' 0" frame height will have one (1) strike at the head, one (1) strike at the sill and three (3) locking points at the stile. ctive handle set with solid brass handle and keylock with K-keyway cylinder. Handle Height at [Typical 36"] [Greater than 54"] from bottom of panel. assage anel Finish (when applicable) Hardware finish is [baked enamel [White] [Champagne] [Brown] [Matte Black]] [VD High erformance finish [Bright Brass] [Satin Nickel]] [Oil-Rubbed Bronze] [ntique Brass] [Distressed Bronze] [Distressed Nickel] [olished Nickel] [olished Chrome]. Key cylinder finish is [Brass] [Stainless Steel] [Matte Black]. Matching passive handle set style on swinging panel adjacent to passage panel (on applicable configurations) (e.g. 1L-3R has active/passive). assive anel Locks Hardware style is Dualpoint Lock Handle (on applicable panels not adjacent to passage panel). Handle Height at 36"] [Greater than 54"] from bottom of panel. Mortised multi-point locking systems with shoot-bolts at head and sill will engage simultaneously. assive anel Finish Hardware finish is [baked enamel [White] [Brown] [Matte Black]] [plated [Bright Brass] [Satin Nickel] [ntique Brass] [olished Chrome]]. OTIONL RODUCTS Grilles Integral Light Technology Grilles Interior grilles are [5/8"] [7/8"] [1-1/4"] [2"] ogee profile that are solid [pine] [mahogany] [douglas fir]. Interior surfaces are [unfinished, ready for site finishing] [factory primed] [pine: factory prefinished [paint] [stain] 2]. Exterior grilles are [7/8" ogee profile] [1-1/4" ogee profile] [2" ogee profile] that are extruded aluminum. atterns are [Traditional] [rairie] [Top Row] [Cross] [New England] [Victorian]. Insulating glass contains non-glare spacer between the panes of glass. Grilles are adhered to both sides of the insulating glass with VHB acrylic adhesive tape and aligned with spacer. or Grilles-Between-the-Glass 3 Insulating glass contains 3/4" contoured aluminum grilles permanently installed between two panes of glass (exterior air-space on triple-pane insulating glass). atterns are [Traditional] [rairie] [Cross] [Top Row]. Interior color is [White] [Tan 4 ] [Brown 4 ] [utty 4 ] [Black] [Morning Sky Gray] [Ivory] [Sand Dune] [Harvest] [Cordovan] [Brickstone]. Exterior color 5 is [Standard 2 ]. or Roomside Removable Grilles [[3/4"] [1-3/4"] [2"] Regular] [[1-1/4"] [2"] Colonial] profile. [Traditional] [rairie] patterns that are removable solid pine wood bars steel-pinned at joints and fitted to sash with steel clips and tacks. Interior [unfinished, ready for site finishing] [factory primed] [pine: factory prefinished [paint] [stain] 2]. Exterior [unfinished, ready for site finishing] [primed] [finish color matched to exterior cladding 5]. Sensors Optional factory-installed integrated security sensors available in door configurations with passage panel. Detects lock or unlock on passage door only, non-window handle height. (1) Insulating glass with argon is Low-E coated. ll other insulating glass is air-filled. (2) Contact your local ella sales representative for current color options. (3) vailable in clear, Low-E and obscure insulating glass. (4) Tan, Brown or utty Interior GBG colors are available in single-tone (Brown/Brown, Tan/Tan or utty/ utty). Other interior colors are also available with Tan or Brown exterior. (5) ppearance of exterior grille color will vary depending on Low-E coating on glass. ella 2018 rchitectural Design Manual Division 08 Openings Windows and Doors BF-15

16 rchitect Series Traditional UNIT SECTIONS luminum-clad Exterior Out-Swing VH VH VH L1 L2 R2 R1 L1 L2 L3 L4 R1 L3 L2 L1 EC ICS LJ B ICS BJ SS LV FS 6" [153] B: ctive Bolt Handles H: ctive Handle Jamb : Dual oint Lock Handle EC: End Carrier Set : Hinge Jamb H: Hinge anel Jamb ICS: Intermediate Carrier Set LJ: Lock Jamb M: Multipoint Lock OH: Offset Hinge H: assive Handle Jamb 1 5/16" [33] 4 11/16" [119] FRME HEIGHT FRME HEIGHT 8 3/4" [222] Finished Floor 1 1/4" [32] 1/4" [6] 2 5/16" [59] 1/2" [12] 1/4" [6] 1/4" [6] 8 3/4" [222] 8 3/4" [222] 2" [51] 2 7/8" [73] VH VENT HED FRME HEIGHT VH VENT HED VH VENT HED SS STNDRD SILL 2 11/16" [69] LV 1 3/4" [44] LOW ROFILE VENT SILL Sub Floor 1/2" [13] 2 11/16" [69] FS 1 3/4" [43] FLUSH SILL 1" [25] Scale 3" = 1' 0" ll dimensions are approximate. Low rofile and Flush Sills are not rated for water. ella 2018 rchitectural Design Manual Division 08 Openings Windows and Doors BF-16

17 rchitect Series Traditional UNIT SECTIONS luminum-clad Exterior Out-Swing EC ICS LJ ICS EC EC ICS LH LJ ICS \H \H \H \H H H \H 2 1/8" [54] Head Track Floor Track 4 11/16" [119] 2 1/16" [52] Head Track 1 1/4" [32] 13/16" [20] HINGE JMB ICS 9 3/8" [19] INTERMEDITE CRRIER SET 6" [153] 2 1/16" [52] Floor Track 9 3/8" [19] LJ 2 1/16" [52] LOCK JMB 6 1/8" [155] DUL OINT LOCK OFFSET HINGE 1 3/4" [44] 3/4" [19] 10 1/4" [19] EC 9 5/8" [244] END CRRIER SET CTIVE / SSIVE STRGL Scale 3" = 1' 0" ll dimensions are approximate. ella 2018 rchitectural Design Manual Division 08 Openings Windows and Doors BF-17

18 rchitect Series Traditional UNIT SECTIONS luminum-clad Exterior In-Swing VH VH VH L1 L2 R2 R1 L1 L2 L3 L4 R1 R2 R3 L1 EC ICS LJ ICS B SS LV FS 6 9/16" [167] B: ctive Bolt Handles H: ctive Handle Jamb : Dual oint Lock Handle EC: End Carrier Set : Hinge Jamb H: Hinge anel Jamb ICS: Intermediate Carrier Set LJ: Lock Jamb M: Multipoint Lock OH: Offset Hinge H: assive Handle Jamb FRME HEIGHT 2 13/16" [72] 8 1/16" [205] 2 1/16" [52] VH VENT HED 2" 8 3/4" [51] [222] FRME HEIGHT VH VENT HED FRME HEIGHT 2 1/16" [52] VH VENT HED 1/2" [12] 1/4" [6] 1/4" [6] 8 3/4" [222] 8 3/4" [222] Finished Floor 2 3/16" [56] 1" [26] 1/4" [6] 1 1/2" [38] SS STNDRD SILL 2 9/16" [65] LV 1 3/4" [44] 1/2" [13] Sub Floor LOW ROFILE VENT SILL 2 9/16" [65] FS 1 3/4" [43] FLUSH SILL 1" [25] Scale 3" = 1' 0" ll dimensions are approximate. Low rofile and Flush Sills are not rated for water. ella 2018 rchitectural Design Manual Division 08 Openings Windows and Doors BF-18

19 rchitect Series Traditional UNIT SECTIONS luminum-clad Exterior In-Swing \OH OH\ \OH OH\ \OH LH H EC H ICS LH LJ ICS ICS LJ ICS 15/16" [23] Head Track Floor Track Head Track 15/16" [23] 6 1/8" [155] 9 3/8" [238] 9 3/8" [238] 6 1/8" [156] 15/16" [23] Floor Track 2 1/8" [53] 10 1/4" [260] 3/4" [20] 9 5/8" [244] 2 1/16" [52] 6 9/16" [167] 6 5/8" [167] 2 1/16" [52] HINGE JMB ICS INTERMEDITE CRRIER SET HINGE JMB DUL OINT LOCK OFFSET HINGE LJ LOCK JMB EC END CRRIER SET 2 1/8" [55] CTIVE / SSIVE STRGL Scale 3" = 1' 0" ll dimensions are approximate. ella 2018 rchitectural Design Manual Division 08 Openings Windows and Doors BF-19