Architect Series Traditional

Transcription

1 SECTION DIRECTORY Product Selection Guide Size and Performance Data... LSPD-2 Grille Types... LSPD-3 Size Dimensions and Panel Configurations... LSPD-5 Design Data Vent and Fixed... LSPD-7 Detailed Product Descriptions...LSPD-10 Unit Sections...LSPD-11 The information published in this document is believed to be accurate at the time of publication. However, because we are constantly working to improve our products, specifications are subject to change without notice. Consult your local Pella representative for up-to-date product information. LSPD-1

2 PRODUCT SELECTION GUIDE Size and Performance Data STANDARD GLAZING Glazing Type Dual-Pane Insulating Glass Insulated Glass Options/Low-E Types SunDefense Low-E AdvancedComfort Low-E Advanced Low-E NaturalSun Low-E Clear (no Low-E coating) Additional Glass Options OPTIONS / UPGRADES Tempered Glass Gas Fill/High Altitude Argon EXTERIOR EnduraClad aluminum-clad Obscure Glass 1 Tinted Glass (Bronze, Gray and Green) Krypton (Available with triple-pane glazing only) High altitude (with air) High altitude with argon EnduraClad Plus aluminum-clad Cladding Colors 1 27 Standard colors Custom Colors INTERIOR Unfinished wood WOOD TYPES Pine HARDWARE Bright Brass, Satin Nickel or Oil Rubbed Bronze GRILLES Integral Light Technology Grilles Factory primed Factory prefinished paint (Not available with premium wood upgrade) Mahogany, Douglas Fir Traditional,, Top Row, Cross, New England, Victorian, Custom Roomside Removable Grilles Traditional,, Top Row, Cross, New England, Victorian, Custom Grilles-Between-the-Glass Traditional,, Top Row 1, Cross, Custom-Equally Divided (1) ontact your local Pella sales representative for current designs and color options. LSPD-2

3 GRILLE TYPES Typical Grille Profiles Integral Light Technology Putty and Ogee Glaze Grilles Clad Exterior - Wood Interior Putty and Ogee Glaze Grilles Wood Exterior - Wood Interior 5/8" 7/8" 5/8" 7/8" 5/8" 7/8" 5/8" 7/8" 5/8" ILT 7/8" ILT ILT Ogee Glaze Grilles Clad Exterior - Wood Interior 5/8" ILT 7/8" ILT ILT Contoured Aluminum - Grilles-Between-the-Glass 7/8" 2" 3/4" 3/4" 3/4" Contoured GBG 3/4" Contoured GBG 7/8" 2" 7/8" ILT ILT 2" ILT Removable Interior Pine Grilles 3/4" 2" 2" 3/4" Traditional RMB Traditional RMB 2" Traditional RMB Colonial RMB 2" Colonial RMB Interior wood ILT grilles available in Pine, Mahogany or Douglas Fir to match complete unit. Exterior wood ILT grilles available in Pine or Mahogany to match complete unit. Rev. 08/24/2017 LSPD-3

4 GRILLE TYPES Typical Grille Patterns Integral Light Technology Grilles and Removable Grilles PRAIRIE LITE PATTERNS Standard corner lite dimension for patterns = 3-1/2". Integral Light Technology Grilles 9-Lite available in all special sizes. -Lite available at 8' height; other heights available per custom drawing. 14-Lite available in units > 2' 1-1/2" width. Removable Grilles 9-Lite available in units < 7' 0-1/2" height. in heights > 7' 0-1/4" will have Lites. OTHER AVAILABLE PATTERNS Top Row Standard visible glass to separator bar = 14" or half of total visible glass height, whichever is smaller. Cross Standard visible glass to separator bar = one-quarter of total visible glass height. New England Standard visible glass to separator bar = half of total visible glass height. Grilles-Between-the-Glass PRAIRIE LITE PATTERNS (9-Lite) (-Lite) (-Lite) (14-Lite) Top Row Cross New England Standard corner lite dimension = 3-1/2". 9-Lite available in units < 7' 0-3/4" height. in heights > 7' 0-1/2" will have lites. -Lite available in units 7' 2" height. (9-Lite) (-Lite) (-Lite) (14-Lite) OTHER OTHER AVAILABLE AVAILABLE PATTERNS PATTERNS Cross Horizontal bar is 1/4 of visible glass from the top in door panels. Not available in transoms. Cross Top Row Top Row Horizontal bar may be ordered ", 14" or 16" from the top. Transoms with frame heights 21", the horizontal bar will be positioned at 1/2 the visible glass height. Top Row not available in transoms with frame height <21". = Visible Glass Lite dimensions noted can vary. Custom configurations are available; for details contact your local Pella sales representative. LSPD-4

5 SIZE DIMENSIONS Stacking Panel Configurations Size Dimensions ARCHITECT SERIES NUMBER OF PANELS Min. Frame ONE WAY (Inches) Max. Frame Min. Frame BI-PART (Inches) Max. Frame 2-PANEL PANEL / /4 4-PANEL / /4 5-PANEL / /4 6-PANEL / /4 7-PANEL / /4 8-PANEL / /4 10-PANEL 240-1/ /4 Minimum to Maximum door width dimensions refers to frame to frame dimension. Values represent minimum and maximum values without consideration of panel configuration, consult design data for specific values for your venting configuration. Panel Configurations Two Panel Three Panel Four Panel Five Panel Six Panel XO 2XO 3XO 4XO 5XO OX O2X O3X O4X O5X OXO OX-XO O2X-2XO Seven Panel Eight Panel Ten Panel 6XO 7XO O4X-4XO O6X O7X O3X-3XO Custom sized panels in 1/8" increments. Doors are viewed from the exterior. Traditional panels shown. Contact your local Pella sales representative for more information. LSPD-5

6 SIZE DIMENSIONS Pocketing Panel Configurations Size Dimensions ARCHITECT SERIES NUMBER OF PANELS Min. Frame Minimum to Maximum door width dimensions refers to frame to frame dimension. Values represent minimum and maximum values without consideration of panel configuration, consult design data for specific values for your venting configuration. Frame Dimensions include the pocketing depth into the wall. 1 POCKET ONE WAY (Inches) Max. Frame Min. DLO DLO = Daylight Opening which indicates absent the pockets. Max. DLO Min. Frame 2 POCKET BI-PART (Inches) Max. Frame Min. DLO 1-PANEL /2 58-1/2 Max. DLO 2-PANEL / /2 1-1/ /4 54-1/ /4 3-PANEL / /2 4-PANEL / / / / / /4 5-PANEL / /2 6-PANEL / / / / / /4 7-PANEL / /2 8-PANEL / / / / / /4 10-PANEL 296-1/ / / /4 Panel Configurations One Panel Two Panel Three Panel Four Panel Five Panel XP 2XP 3XP 4XP 5XP PX P2X P3X P4X P5X PX-XP P2X-2XP Six Panel Seven Panel Eight Panel 6XP 7XP 8XP P6X P7X P8X P3X-3XP P4X-4XP Ten Panel P5X-5XP Custom sized panels in 1/8" increments. Doors are viewed from the exterior. Traditional panels shown. Contact your local Pella sales representative for more information. LSPD-6

7 DESIGN DATA Aluminum-Clad Exterior Panel Restrictions Size Chart ARCHITECT SERIES MIN PANEL MAX PANEL 27" x 48" 57" x 117- Lift-and-Slide (686 x 1 219) (1 448 x 2 981) ARCHITECT SERIES MIN FRAME MAX FRAME 52" x 49-1/8" 656-1/2" x 119-3/4" Lift-and-Slide (1 320 x 1 248) ( x 3 040) KEY FW = Frame FH = Frame Height TP = Total # of panels PW = Panel PH = Panel Height ROW = DLO = Daylight Opening PO = Panel Offset VARIABLE DIM Panel Offset (PO) 4 ARCHITECT SERIES SILL TYPE MIN FRAME HEIGHT MAX FRAME HEIGHT PANEL TO FRAME HEIGHT OFF-SET Surface Mount Sill 49-1/8" 118-1/2" 1-1/8" 9/16" Sill /4" 1-1" Sill 49-7/8" 119-1/4" 1-7/8" 1-1/4" Weep Sill 50-1/8" 119-1/2" 2-1/8" 1-1/2" Sill /4" 2- LIFT-AND-SLIDE FRAME WIDTH w/ Automation Panel ONE WAY (MINIMUM 2 PANELS) (FW + (TP-1) x PO - 2) / TP BI-PARTING 1 POCKET ONE WAY STARTING REFERENCE 2 POCKET BI-PARTING FW+1 FW +.5 FW FW+9 FW FW + 16 (FW + (TP-2) * PO ) / TP (FW + (TP - 1) x PO - 3) / (TP + 1) (FW+(TP -2) * PO -4.25) / (TP +2) Pocket Depth NA PW + 2 PW + 2 Pocket Depth w/ Automation NA PW PW DLO FW + 1 ROW - Pocket Depth FRAME HEIGHT Height / DLO Height Panel Height Surface Mount Sill Panel Height 9/16" Sill Panel Height 1" Sill Panel Height 1-1/4" Weep Sill Panel Height 1-1/2" Sill STARTING REFERENCE FH FH FH FH FH FH ROW - Pocket Depth x 2 Pocket NA (TP x 2.75) (TP x.5 x 2.75) Overall Track depth # Tracks x 2.75 LSPD-7

8 DESIGN DATA Aluminum-Clad Exterior Finished Pocket Finished Pocket Required Access Panel Motor Assembly Idler Pulley In wall pocket Panel Height In wall pocket Frame Height Height Panel Daylight Opening (DLO) Pocket Depth Frame Pocket Depth Daylight Opening (DLO) Frame Finished Pocket Required Access Panel Motor Assembly Idler Pulley Height Frame Height In wall pocket Panel Height Stile Pocket Depth Daylight Opening (DLO) Panel Frame LSPD-8

9 DESIGN DATA Aluminum-Clad Exterior VENT UNITS Lift and Slide Configuration Total Panels Panels Left Panels Right Total # of Tracks Pocket Overall Track Depth Architect Series Frame (Inches) Min Frame Max Frame OX OX / OXX O2X / OXXX O3X OXXXX O4X / OXXXXX O5X / OXXXXXX O6X / OXXXXXXX O7X XO XO / XXO 2XO / XXXO 3XO XXXXO 4XO / XXXXXO 5XO / XXXXXXO 6XO / XXXXXXXO 7XO PX PX Left 2-3/ /2 58-1/2 PXX P2X Left 5-1/ / /2 PXXX P3X Left 8-1/ / /2 PXXXX P4X Left / /2 PXXXXX P5X Left 13-3/ / /2 PXXXXXX P6X Left 16-1/ / /2 PXXXXXXX P7X Left 19-1/ / /2 PXXXXXXXX P8X Left / /2 XP XP Right 2-3/ /2 58-1/2 XXP 2XP Right 5-1/ / /2 XXXP 3XP Right 8-1/ / /2 XXXXP 4XP Right / /2 XXXXXP 5XP Right 13-3/ / /2 XXXXXXP 6XP Right 16-1/ / /2 XXXXXXXP 7XP Right 19-1/ / /2 XXXXXXXXP 8XP Right / /2 OXO OX-O /2 79-1/ /4 OXO O-XO /2 79-1/ /4 OX-XO OX-XO / / /4 OXX-XXO O2X-2XO / / /4 OXXX-XXXO O3X-3XO / /4 OXXXX-XXXXO O4X-4XO / / /4 PX-XP PX-XP Left & Right 2-3/4 1-1/ /4 54-1/ /4 PXX-XXP P2X-2XP Left & Right 5-1/ / / / /4 PXXX-XXXP P3X-3XP Left & Right 8-1/ / / / /4 PXXXX-XXXXP P4X-4XP Left & Right / / / /4 PXXXXX-XXXXXP P5X-5XP Left & Right 13-3/ / / / /4 Min DLO Max DLO LSPD-9

10 DETAILED PRODUCT DESCRIPTIONS Aluminum-Clad Exterior FRAME All frame components not concealed by Interior/Exterior trim are Dark Bronze anodized aluminum and are not thermally broken. Frame depth varies by system configuration. Solid extruded aluminum sill track with Bronze anodized finish, and stainless steel cap on which the rollers will glide. Sill height is [3/8 Surface Mount sill, installed on top of the finished floor] [[9/16"] [1"] [1-1/4" Weep (has exposed Bronze anodized as part of the weep system)] [1-1/2"] (use based on finished floor height), and is integrated into the finished floor]. DOOR PANELS Select softwood, immersion treated with Pella s EnduraGuard wood protection formula in accordance with WDMA I.S.-4. The EnduraGuard formula includes three active ingredients for protection against the effects of moisture, decay, stains from mold and mildew. Plus, an additional ingredient adds protection against termite damage. Interior exposed surfaces are veneered with [Pine] [Mahogany] [Douglas Fir] on straight members. Exterior surfaces are clad with aluminum. Panel stiles are LVL core with finger-jointed edge bands on both sides and veneered on both faces. Panel rails are three-ply construction, randomly finger-jointed blocks laminated with waterresistant glue and veneered on both sides. Corners are urethane-silicone hybrid sealed and secured with metal fasteners. Panel thickness is 2-1/16" (52 mm). WEATHERSTRIPPING Mohair along the head of frame, jambs, interlocks, meeting stile, and sill channel where applicable. Neoprene Fin along bottom of panel. GLAZING SYSTEM 1 Quality fully-tempered float glass complying with ASTM C Urethane-glazed 13/16" dual-seal insulating glass [clear] [obscure] [[Advanced Low-E with argon] [SunDefense Low-E with argon] [AdvancedComfort Low-E with argon] [NaturalSun Low-E with argon]] [[bronze] [gray] [green] Advanced Low-E with argon]. Custom and high altitude glazing available. EXTERIOR Aluminum-clad panel exteriors shall be finished with EnduraClad protective finish on panels, in a multi-step, baked-on finish. Color is [Standard 2] [Custom 2]. or Aluminum-clad panel exteriors shall be finished with EnduraClad Plus protective finish with 70% fluoropolymer resin on panels, in a multi-step, baked-on finish. Color is [Standard 2] [Custom 2]. INTERIOR [Unfinished, ready for site finishing] [factory primed with one coat acrylic latex] [factory prefinished [White] [Linen White] [Bright White] [stain 2]]. HARDWARE Handle Handle is of solid brass material and can be removed from the panel when opening and stacking the panels One handle is provided for a one-way configuration, and two handles are provided for bi-parting configurations. Finish Handle finish is [Oil-Rubbed Bronze] [Satin Nickel]. OPTIONAL PRODUCTS Grilles Integral Light Technology Grilles Interior grilles are [5/8 ] [7/8"] [1-1/4"] [2"] ogee profile that are solid [Pine] [mahogany] [douglas fir]. Interior surfaces are [unfinished, ready for site finishing] [factory primed] [pine: factory prefinished [White] [Linen White] [Bright White] [stain 1]]. Exterior grilles are [5/8 putty profile] [7/8" [putty] [ogee] profile] [1-1/4" [putty] [ogee] profile] [2" ogee profile] that are extruded aluminum. Patterns are [Traditional] [] [Top Row] [Cross] [New England] [Victorian]. Insulating glass contains non-glare spacer between the panes of glass. Grilles are adhered to both sides of the insulating glass with VHB acrylic adhesive tape and aligned with the non-glare spacer. or Grilles-Between-the-Glass 3 Insulating glass contains 3/4" contoured aluminum grilles permanently installed between two panes of glass. Patterns are [Traditional] [] [Cross] [Top Row] Interior color is [White] [Black] [Tan 4] [Brown 4] [Putty 4] [Ivory] [Brickstone] [Harvest] [Cordovan]. Exterior color 5 is [Standard] 2. or Roomside Removable Grilles [[3/4"] [1-3/4"] [2"] Regular] [[1-1/4"] [2"] Colonial] profile. [Traditional] [] patterns that are removable solid pine wood bars steel-pinned at joints and fitted to sash with steel clips and tacks. Interior [unfinished, ready for site finishing] [factory primed] [pine: factory prefinished [White] [Linen White] [Bright White] [stain 2]]. Exterior [unfinished, ready for site finishing] [primed] [finish color matched to exterior cladding 5]. (1) Insulating glass with argon is Low-E coated. All other insulating glass is air-filled. (2) Contact your local Pella sales representative for current color options. (3) Available in clear, Low-E or obscure insulating glass. (4) Tan, Brown or Putty Interior GBG colors are available in single-tone (Brown/Brown, Tan/Tan or Putty/Putty). Other interior colors are also available with Tan or Brown exterior. (5) Appearance of exterior grille color will vary depending on Low-E coating on glass. Rev. 08/23/2017 LSPD-10

11 UNIT SECTIONS Aluminum-Clad Exterior Required Access Panel Motor Assembly Idler Pulley VH Configuration Contemporary French Top Rail Height 4-5/8" 4-9/16" 4-5/8" 4-5/8" 8-3/4" 4-5/8" 2 3/4" [70] Bottom Rail Height Stile Height Unit Height In Wall Pocket Panel Height PJ I I MS I I L3 L2 L1 Stile R1 R2 R3 In wall pocket Pocket Depth Outer Panel Panel VS Primary DLO Panel Configuration Contemporary French Top Rail Height Bottom Rail Height Stile 4-5/8" 4-9/16" 4-5/8" 4-5/8" 8-3/4" 4-5/8" 2 1/16" [52] 2 1/16" [52] 1 1/2" [38] 1 1/2" [38] 1 [35] 1/2" [13] 7/8" [22] 1 1/16" [27] 9/16" [14] 2 3/4" [70] 7/8" [22] VH VENT HEAD 1 [35] VS VENT SILL 3/16" [6] 1 7/8" [47] WJ WALL JAMB 3/4" [19] 5/8" [16] MS MEETING STILE 5 1/4" [133] 8 7/16" [215] 4 [1] Finished Floor Material by Others /8" [676] PJ POCKET JAMB 1 7/8" [47] 9/16" 1 9/16" [14] [40] 3/16" [6] I INTERLOCKER 5/8" [16] Surface Mount Surface Mount VS 4 9/16" [116] 4 9/16" [116] 4 9/16" [116] 4 9/16" [116] 9/16" [14] VENT SILL VS VENT SILL Finished Floor Material by Others. Sub Floor 1" [25] [32] Finished Floor Material by Others. Sub Floor 1 1/2" [38] 9/16" Sill 1" Sill Sill 11/2" Sill Scale 3" = 1' 0" All dimensions are approximate. Rev. 07/10/2017 LSPD-11