Size and performance summary. Glazing performance. Grille profiles and patterns. Size tables. Design Data. Detailed Product Description
|
|
- Angelina Jordan
- 5 years ago
- Views:
Transcription
1 SECTIN DIRECTRY Size and performance summary Glazing performance Grille profiles and patterns Size tables Design Data Detailed Product Description Cross sections The information published in this document is believed to be accurate at the time of publication. However, because we are constantly working to improve our products, specifications are subject to change without notice. Consult your local Pella representative for up-to-date product information. Pella 2018 Architectural Design Manual Division 08 penings Windows and Doors V250-CM-1
2 BRAND SUMMARY Pella 250 Series Casement windows feature extruded, rigid PVC (polyvinyl chloride) frames and sash with heat-fused mitered corners for a fully welded corner assembly. Casement windows meet industry standards for water infiltration and wind resistance and meet ENERGY STAR guidelines with dual-pane or triplepane insulated glass. Standard performance window sash are available with optional foam insulation for increased thermal performance. BLCK FRAME DESIGN 3-1/4" Block Pocket Install 3-1/4" Block Pocket Install Frame allows a perfect fit into a 3-1/4" pocket when installed into an existing Double-Hung or Single-Hung wood frame from the interior. The block frames include interior and exterior accessory grooves. Custom sizes are available in 1/8" increments for a perfect fit. DUBLE-WALL FLUSH FLANGE Replacement Frame Design The flush flange frame allows for easy replacement of old aluminum or steel frame windows without removing the existing frame head or jambs typically used with stucco exteriors in southwest arid climates. The frame depth is 3-1/4" (overall wall depth of 3") includes interior accessory groove. Custom sizes are available in 1/8" increments for a perfect fit. 3-1/4" Block Pocket Install NAIL FIN FRAME DESIGN With or Without Integrated J-Channel Continuous fin with welded corners adds a protective weather barrier and allows for hassle-free installation. The standard 3-1/4" frame depth includes interior and exterior accessory grooves. Nailing fin has a 1-1/8" setback from exterior face of window frame. Custom sizes are available in 1/8" increments for a perfect fit. 4-9/16" and 6-9/16" factory applied primed or clear jamb extensions are available. INTEGRAL FLANGE FRAME The integral flange frame can be used in new construction block or concrete walls. Commonly used in Florida and often referred to as "Florida Flange" frame. The frame depth is 3-1/4" (overall wall depth of 3") includes interior accessory groove. Custom sizes are available in 1/8" increments for a perfect fit. With J-Channel Without J-Channel Pella 2018 Architectural Design Manual Division 08 penings Windows and Doors V250-CM-2
3 PRDUCT SELECTIN GUIDE Size and Performance Data Sound Transmission Class SIZES Standard Sizes S Special Sizes Available Built on 1/8" Increments FRAMES Nail Fin nly Nail Fin with J-Channel 3-1/4" Block Pocket Install/Replacement S Double-Wall Flush Flange Integral Flange PERFRMANCE 1 Standard Performance Meets or Exceeds AAMA/WDMA Ratings LC-PG35 Hallmark Certified Air Infiltration (cfm/ ft 2 of 1.57 psf wind pressure.) 0.10 Design Pressure 35 psf Water Penetration Resistance 7.5 psf Performance Upgrade Meets or Exceeds AAMA/WDMA Ratings LC-PG50 Hallmark Certified Air Infiltration (cfm/ ft 2 of 1.57 psf wind pressure.) 0.10 Design Pressure 50 psf Water Penetration Resistance 7.5 psf ther Performance Criteria Forced Entry Resistance (Minimum Security Grade) 2 10 Maximum perating Force (lbs) (Initiate Motion / Maintain Motion) 15/6 SUND TRANSMISSIN CLASS AND UTDR-INDR TRANSMISSIN CLASS Frame Size Tested 3 verall Glazing Thickness Exterior Thickness Glazing System Interior Thickness Third Pane Thickness STC Rating ITC Rating - DUAL PANE INSULATING GLASS Vent 23-1/2" x 59" 3/4" 3mm 3mm Vent 23-1/2" x 59" 3/4" 3mm 5mm Fixed 47-1/4" x 59" 3/4" 3mm 3mm Fixed 47-1/4" x 59" 1" 3mm 5mm TRIPLE-PANE INSULATING GLASS Vent 23-1/2" x 59" 1" 3mm 3mm 3mm S = Standard; = ptional (1) Published performance data is for single unit only. See Design Data pages in this section for specific product performance class and grade values. (2) The higher the level, the greater the product's ability to resist forced entry. (3) ASTM E 1425 defines standard sizes for acoustical testing. Ratings achieved at that size are representative of all sizes of the same configuration. The presence of low-e or argon have negligible effect on sound attenuation characteristics. Pella 2018 Architectural Design Manual Division 08 penings Windows and Doors V250-CM-3
4 PRDUCT SELECTIN GUIDE Features and ptions GLAZING (INSULATING GLASS) Glazing Type Dual-pane insulating glass Triple-pane insulating glass Insulated ptions / Low-E Types Advanced Low-E NaturalSun Low-E SunDefense Low-E 1 Bronze-tinted Advanced Low-E 1 Additional Glazing ptions Annealed glass Tempered glass bscure glass 2 Gas Fill / High Altitude Argon High altitude High altitude with argon 1 SASH Foam Insulation Performance Upgrade INTERIR / EXTERIR CLR White Interior/White Exterior Almond Interior/Almond Exterior Fossil Interior/Fossil Exterior White Interior/Brown Exterior White Interior/Fossil Exterior White Interior/Black Exterior White Interior/Brick Red Exterior White Interior/Hartford Green Exterior White Interior/Morning Sky Gray Exterior White Interior/Poplar White Exterior White Interior/Portobello Exterior White Interior/Tan Exterior S S S S S HARDWARE Color matched hardware SCREENS Conventional black fiberglass screens - flat GRILLES Grilles-Between-the- 3/4" Contour Flat 1" Contour Grille Patterns: Traditional, Prairie, Top Row, Custom - Equally Divided Simulated-Divided-Light Grilles 1 (without spacer) 7/8" contour profile Grille Patterns: Traditional, Prairie, Top Row, Custom - Equally Divided S S S = Standard; = ptional (1) Not available with triple-pane glazing. (2) Contact your local Pella sales representative for current offering. Rev. 05/08/2018 Pella 2018 Architectural Design Manual Division 08 penings Windows and Doors V250-CM-4
5 GLAZING PERFRMANCE - TTAL UNIT Dual-Pane Insulating Thickness Type of Glazing NFRC Certified Product # (mm) Ext. Int. Gap Fill U-Factor Performance Values 1 SHGC VLT CR Shaded Areas Meet ENERGY STAR Performance Criteria in Zones Shown U. S. Canada 2 Zone ER Zone VENT 3MM GLASS N NC SC S /4" Advanced Low-E IG PEL-N air with SDL or grilles-between-the-glass PEL-N /4" Advanced Low-E IG PEL-N argon with SDL or grilles-between-the-glass PEL-N /4" NaturalSun Low-E IG PEL-N air with SDL or grilles-between-the-glass PEL-N /4" NaturalSun Low-E IG PEL-N argon with SDL or grilles-between-the-glass PEL-N /4" SunDefense Low-E IG PEL-N air with SDL or grilles-between-the-glass PEL-N /4" SunDefense Low-E IG PEL-N argon with SDL or grilles-between-the-glass PEL-N VENT 3MM / 5MM GLASS 1" Advanced Low-E IG PEL-N air with SDL or grilles-between-the-glass PEL-N " Advanced Low-E IG PEL-N argon with SDL or grilles-between-the-glass PEL-N " NaturalSun Low-E IG PEL-N air with SDL or grilles-between-the-glass PEL-N " NaturalSun Low-E IG PEL-N argon with SDL or grilles-between-the-glass PEL-N " SunDefense Low-E IG PEL-N air with SDL or grilles-between-the-glass PEL-N " SunDefense Low-E IG PEL-N argon with SDL or grilles-between-the-glass PEL-N R-Value = 1/U-Factor SHGC = Solar Heat Gain Coefficient VLT % = Visible Light Transmission CR = Condensation Resistance ER = Canadian Energy Rating Climate Zones (1) Glazing performance values are calculated based on NFRC 100, NFRC 200 and NFRC 500. ENERGY STAR values are updated to 2016 (Version 6) criteria. (2) The values shown are based on Canada's updated ENERGY STAR 2015 initiative. Based on unit size, some products will use 2.5mm glass that may have improved glazing performance from what is shown. See the Product Performance section for more detailed information or visit for Energy Star guidelines. Pella 2018 Architectural Design Manual Division 08 penings Windows and Doors V250-CM-5
6 GLAZING PERFRMANCE - TTAL UNIT Dual-Pane Insulating Thickness Type of Glazing NFRC Certified Product # (mm) Ext. Int. Gap Fill U-Factor Performance Values 1 SHGC VLT CR Shaded Areas Meet ENERGY STAR Performance Criteria in Zones Shown U. S. Canada 2 Zone ER Zone VENT 3MM GLASS WITH FAM INSULATIN N NC SC S /4" Advanced Low-E IG PEL-N air with SDL or grilles-between-the-glass PEL-N /4" Advanced Low-E IG PEL-N argon with SDL or grilles-between-the-glass PEL-N /4" NaturalSun Low-E IG PEL-N air with SDL or grilles-between-the-glass PEL-N /4" NaturalSun Low-E IG PEL-N argon with SDL or grilles-between-the-glass PEL-N /4" SunDefense Low-E IG PEL-N air with SDL or grilles-between-the-glass PEL-N /4" SunDefense Low-E IG PEL-N argon with SDL or grilles-between-the-glass PEL-N VENT- 3MM / 5MM GLASS WITH FAM INSULATIN 1" Advanced Low-E IG PEL-N air with SDL or grilles-between-the-glass PEL-N " Advanced Low-E IG PEL-N argon with SDL or grilles-between-the-glass PEL-N " NaturalSun Low-E IG PEL-N air with SDL or grilles-between-the-glass PEL-N " NaturalSun Low-E IG PEL-N argon with SDL or grilles-between-the-glass PEL-N " SunDefense Low-E IG PEL-N air with SDL or grilles-between-the-glass PEL-N " SunDefense Low-E IG PEL-N argon with SDL or grilles-between-the-glass PEL-N R-Value = 1/U-Factor SHGC = Solar Heat Gain Coefficient VLT % = Visible Light Transmission CR = Condensation Resistance ER = Canadian Energy Rating Climate Zones (1) Glazing performance values are calculated based on NFRC 100, NFRC 200 and NFRC 500. ENERGY STAR values are updated to 2016 (Version 6) criteria. (2) The values shown are based on Canada's updated ENERGY STAR 2015 initiative. Based on unit size, some products will use 2.5mm glass that may have improved glazing performance from what is shown. See the Product Performance section for more detailed information or visit for Energy Star guidelines. Pella 2018 Architectural Design Manual Division 08 penings Windows and Doors V250-CM-6
7 GLAZING PERFRMANCE - TTAL UNIT Triple-Pane Insulating Thickness Type of Glazing NFRC Certified Product # (mm) Ext. Middle Int. Gap Fill U-Factor Performance Values 1 SHGC VLT CR Shaded Areas Meet ENERGY STAR Performance Criteria in Zones Shown U. S. Canada 2 Zone ER Zone VENT 3MM GLASS N NC SC S " Advanced Low-E Triple-pane IG PEL-N air with Grilles-between-the-glass PEL-N " Advanced Low-E Triple-pane IG PEL-N argon with Grilles-between-the-glass PEL-N " NaturalSun Low-E Triple-pane IG PEL-N air with Grilles-between-the-glass PEL-N " NaturalSun Low-E Triple-pane IG PEL-N argon with Grilles-between-the-glass PEL-N VENT 3MM GLASS WITH FAM INSULATIN 1" Advanced Low-E Triple-pane IG PEL-N air with Grilles-between-the-glass PEL-N " Advanced Low-E Triple-pane IG PEL-N argon with Grilles-between-the-glass PEL-N " NaturalSun Low-E Triple-pane IG PEL-N air with Grilles-between-the-glass PEL-N " NaturalSun Low-E Triple-pane IG PEL-N argon with Grilles-between-the-glass PEL-N R-Value = 1/U-Factor SHGC = Solar Heat Gain Coefficient VLT % = Visible Light Transmission CR = Condensation Resistance ER = Canadian Energy Rating Climate Zones (1) Glazing performance values are calculated based on NFRC 100, NFRC 200 and NFRC 500. ENERGY STAR values are updated to 2016 (Version 6) criteria. (2) The values shown are based on Canada's updated ENERGY STAR 2015 initiative. Based on unit size, some products will use 2.5mm glass that may have improved glazing performance from what is shown. See the Product Performance section for more detailed information or visit for Energy Star guidelines. Pella 2018 Architectural Design Manual Division 08 penings Windows and Doors V250-CM-7
8 GLAZING PERFRMANCE - TTAL UNIT Tinted Insulating Thickness Type of Glazing NFRC Certified Product # (mm) Ext. Int. Gap Fill U-Factor Performance Values 1 SHGC VLT CR Shaded Areas Meet ENERGY STAR Performance Criteria in Zones Shown U. S. Canada 2 Zone ER Zone VENT 3MM / 5MM GLASS TINTED GLAZING N NC SC S " Bronze Advanced Low-E IG PEL-N air with SDL or grilles-between-the-glass PEL-N " Bronze Advanced Low-E IG PEL-N argon with SDL or grilles-between-the-glass PEL-N VENT 5MM GLASS TINTED GLAZING 1" Bronze Advanced Low-E IG PEL-N air with SDL or grilles-between-the-glass PEL-N " Bronze Advanced Low-E IG PEL-N argon with SDL or grilles-between-the-glass PEL-N VENT 3MM / 5MM GLASS TINTED GLAZING WITH FAM INSULATIN 1" Bronze Advanced Low-E IG PEL-N air with SDL or grilles-between-the-glass PEL-N " Bronze Advanced Low-E IG PEL-N argon with SDL or grilles-between-the-glass PEL-N VENT 5MM GLASS TINTED GLAZING WITH FAM INSULATIN 1" Bronze Advanced Low-E IG PEL-N air with SDL or grilles-between-the-glass PEL-N " Bronze Advanced Low-E IG PEL-N argon with SDL or grilles-between-the-glass PEL-N R-Value = 1/U-Factor SHGC = Solar Heat Gain Coefficient VLT % = Visible Light Transmission CR = Condensation Resistance ER = Canadian Energy Rating Climate Zones (1) Glazing performance values are calculated based on NFRC 100, NFRC 200 and NFRC 500. ENERGY STAR values are updated to 2016 (Version 6) criteria. (2) The values shown are based on Canada's updated ENERGY STAR 2015 initiative. Based on unit size, some products will use 2.5mm glass that may have improved glazing performance from what is shown. See the Product Performance section for more detailed information or visit for Energy Star guidelines. Pella 2018 Architectural Design Manual Division 08 penings Windows and Doors V250-CM-8
9 GLAZING PERFRMANCE - TTAL UNIT Dual-Pane Insulating Thickness Type of Glazing NFRC Certified Product # (mm) Ext. Int. Gap Fill U-Factor Performance Values 1 SHGC VLT CR Shaded Areas Meet ENERGY STAR Performance Criteria in Zones Shown U. S. Canada 2 Zone ER Zone FIXED 3MM GLASS N NC SC S /4" Advanced Low-E IG PEL-N air with SDL or grilles-between-the-glass PEL-N /4" Advanced Low-E IG PEL-N argon with SDL or grilles-between-the-glass PEL-N /4" NaturalSun Low-E IG PEL-N air with SDL or grilles-between-the-glass PEL-N /4" NaturalSun Low-E IG PEL-N argon with SDL or grilles-between-the-glass PEL-N /4" SunDefense Low-E IG PEL-N air with SDL or grilles-between-the-glass PEL-N /4" SunDefense Low-E IG PEL-N argon with SDL or grilles-between-the-glass PEL-N FIXED 5MM GLASS 1" Advanced Low-E IG PEL-N air with SDL or grilles-between-the-glass PEL-N " Advanced Low-E IG PEL-N argon with SDL or grilles-between-the-glass PEL-N " NaturalSun Low-E IG PEL-N air with SDL or grilles-between-the-glass PEL-N " NaturalSun Low-E IG PEL-N argon with SDL or grilles-between-the-glass PEL-N " SunDefense Low-E IG PEL-N air with SDL or grilles-between-the-glass PEL-N " SunDefense Low-E IG PEL-N argon with SDL or grilles-between-the-glass PEL-N FIXED 3MM / 5MM GLASS 1" Advanced Low-E IG PEL-N air with SDL or grilles-between-the-glass PEL-N " Advanced Low-E IG PEL-N argon with SDL or grilles-between-the-glass PEL-N " NaturalSun Low-E IG PEL-N air with SDL or grilles-between-the-glass PEL-N " NaturalSun Low-E IG PEL-N argon with SDL or grilles-between-the-glass PEL-N " SunDefense Low-E IG PEL-N air with SDL or grilles-between-the-glass PEL-N " SunDefense Low-E IG PEL-N argon with SDL or grilles-between-the-glass PEL-N R-Value = 1/U-Factor SHGC = Solar Heat Gain Coefficient VLT % = Visible Light Transmission CR = Condensation Resistance ER = Canadian Energy Rating Climate Zones (1) Glazing performance values are calculated based on NFRC 100, NFRC 200 and NFRC 500. ENERGY STAR values are updated to 2016 (Version 6) criteria. (2) The values shown are based on Canada's updated ENERGY STAR 2015 initiative. Based on unit size, some products will use 2.5mm glass that may have improved glazing performance from what is shown. See the Product Performance section for more detailed information or visit for Energy Star guidelines. Pella 2018 Architectural Design Manual Division 08 penings Windows and Doors V250-CM-9
10 GLAZING PERFRMANCE - TTAL UNIT Triple-Pane Insulating Thickness Type of Glazing NFRC Certified Product # (mm) Ext. Mid. Int. Gap Fill U-Factor Performance Values 1 SHGC VLT CR Shaded Areas Meet ENERGY STAR Performance Criteria in Zones Shown U. S. Canada 2 Zone ER Zone FIXED - 3MM GLASS TINTED GLAZING N NC SC S " Advanced Low-E Triple-pane IG PEL-N air with Grilles-between-the-glass PEL-N " Advanced Low-E Triple-pane IG PEL-N argon with Grilles-between-the-glass PEL-N " NaturalSun Low-E Triple-pane IG PEL-N air with Grilles-between-the-glass PEL-N " NaturalSun Low-E Triple-pane IG PEL-N argon with Grilles-between-the-glass PEL-N R-Value = 1/U-Factor SHGC = Solar Heat Gain Coefficient VLT % = Visible Light Transmission CR = Condensation Resistance ER = Canadian Energy Rating Climate Zones (1) Glazing performance values are calculated based on NFRC 100, NFRC 200 and NFRC 500. ENERGY STAR values are updated to 2016 (Version 6) criteria. (2) The values shown are based on Canada's updated ENERGY STAR 2015 initiative. Based on unit size, some products will use 2.5mm glass that may have improved glazing performance from what is shown. See the Product Performance section for more detailed information or visit for Energy Star guidelines. Pella 2018 Architectural Design Manual Division 08 penings Windows and Doors V250-CM-10
11 GLAZING PERFRMANCE - TTAL UNIT Tinted Insulating Thickness Type of Glazing NFRC Certified Product # (mm) Ext. Int. Gap Fill U-Factor Performance Values 1 SHGC VLT CR Shaded Areas Meet ENERGY STAR Performance Criteria in Zones Shown U. S. Canada 2 Zone ER Zone FIXED - WITH 5MM GLASS TINTED GLAZING N NC SC S " Bronze Advanced Low-E IG PEL-N air with SDL or grilles-between-the-glass PEL-N " Bronze Advanced Low-E IG PEL-N argon with SDL or grilles-between-the-glass PEL-N FIXED - 3MM / 5MM GLASS TINTED GLAZING 1" Bronze Advanced Low-E IG PEL-N air with SDL or grilles-between-the-glass PEL-N " Bronze Advanced Low-E IG PEL-N argon with SDL or grilles-between-the-glass PEL-N R-Value = 1/U-Factor SHGC = Solar Heat Gain Coefficient VLT % = Visible Light Transmission CR = Condensation Resistance ER = Canadian Energy Rating Climate Zones (1) Glazing performance values are calculated based on NFRC 100, NFRC 200 and NFRC 500. ENERGY STAR values are updated to 2016 (Version 6) criteria. (2) The values shown are based on Canada's updated ENERGY STAR 2015 initiative. Based on unit size, some products will use 2.5mm glass that may have improved glazing performance from what is shown. See the Product Performance section for more detailed information or visit for Energy Star guidelines. Pella 2018 Architectural Design Manual Division 08 penings Windows and Doors V250-CM-11
12 GRILLE TYPES Grille Profiles GRILLES-BETWEEN-THE-GLASS SIMULATED-DIVIDED-LIGHT GRILLES WITHUT SPACER 3/4" 1" 3/4" 7/8" Flat Grille 3/4" Contour 1" Contour 3/4" Contour - Triple 7/8" Contour Grille Patterns PRAIRIE LITE PATTERNS Prairie - Approximately 4" from edge of sash to center of bar - Minimum actual glass is 13" 9-Lite Prairie THER AVAILABLE PATTERNS Traditional - Specify number of lites. - Grilles must be equally divided on visible glass. - Minimum 6" x 6". Traditional Top Row Custom Equally Divided Top Row - Standard visible glass to separator bar = 14" or half of total visible glass height, whichever is smaller. For traditional patterns, see size tables. Pella 2018 Architectural Design Manual Division 08 penings Windows and Doors V250-CM-12
13 SPECIAL SIZE FRAME DIMENSINS Miscellaneous Formulas 1-WIDE VENT UNIT 1-WIDE FIXED UNIT MINIMUM 14-1/2" W x 17-1/2" H (368 x 445) MAXIMUM 35-1/2" W x 71-1/2" H (889 x 1 803) MINIMUM 14-1/2" W x 14-1/2" H (368 x 368) MAXIMUM 71-1/2" W x 71-1/2" H (1 803 x 1 803) 36 sq. ft. Max. General Notes: To convert areas to square meters (m 2 ), multiply square feet by Rough pening = Frame Dimension + 1/2". Unit Height must be > Unit Width Keep frame di men sions to the near est 1/8" increment. Tempered glass must measure 18-1/2" diagonally. If glass width to height ratio is > 5 to 1, then unit must be tempered. Miscellaneous Formulas VISIBLE GLASS ACTUAL GLASS 1-WIDE VENT VGW = FW 6.188" VGH = FH 6.188" AGW = FW 5-7/8" AGH = FH 5-7/8" KEY: AGW = Actual Width AGH = Actual Height FW = Frame Width FH = Frame Height VGW = Visible Width VGH = Visible Height CW = Clear opening width CH = Clear opening height Clear pening Formulas 1-WIDE VENT VENT AREA VA = (CH X CW) / 144 CH CH = FH " CW Standard Performance CW = FW " Side Pivot CW = FW " CLEAR PENING WIDTH w/ standard hardware CLEAR PENING WIDTH w/ side pivot hardware CLEAR PENING HEIGHT VENT AREA Shaded portion shows vent area with window open 90. Side pivot hardware only available on frame widths of 28" to 32" The clear opening formulas do not apply to units with FW < Rev. 05/31/2018 Pella 2018 Architectural Design Manual Division 08 penings Windows and Doors V250-CM-13
14 SIZE TABLES Vent Units (381) (368) (457) (610) (711) (762) (813) (445) (597) (699) (749) (800) (914) (902) pening Frame 1' 3" 14 1/ 2" 1' 6" 17 1/ 2" 2' 0" 23 1/ 2" 2' 4" 27 1/ 2" 2' 6" 29 1/ 2" 2' 8" 31 1/ 2" 3' 0" 35 1/ 2" (457) (445) (610) (597) (711) (699) (762) (749) (813) (800) (914) (902) 1' 6" 2' 0" 2' 4" 2' 6" 2' 8" 3' 0" 1/ 2" 1 / 2" 17 1 / 2" 23 1 / 2" 27 1 / 2" 29 1 / 2" / / / / / / / / / / / / / / / / / / / / / / / / / / /3-0 E3 E 1 (1 067) (1 054) (1 118) (1 105) (1 219) (1 207) (1 372) (1 359) (1 524) (1 511) (1 676) (1 664) (1 829) (1 816) 3' 6" 3' 8" 4' 0" 4' 6" 5' 0" 5' 6" 6' 0" 1/ 2" 1 / 2" 41 1 / 2" 43 1 / 2" 47 1 / 2" / 2" 65 1/ 2 " 71 E3 1-3/ / / / / / / / / / / / / / / / / / / / /4-0 T 1-3/ / / / / / /4-6 T 1-3/ / / / / / /5-0 T 1-3/ / / / / / /5-6 E E E E E E Egress Notes: Check all applicable local codes for emergency egress requirements. E = Window meets minimum clear opening of 24" height, 20" width, and 5.7 ft 2. E1 = Window meets minimum clear opening of 24" height, 20" width, and 5.0 ft 2. = With optional side pivot hardware, window meets minimum clear opening of 24" height, 20" width, and 5.7 ft 2. E3 = With optional side pivot hardware, window meets minimum clear opening of 24" height, 20" width, and 5.0 ft 2. T T 1-3/ / / / / / /6-0 E Not to scale. Certain glass aspect ratios may require tempered glass. Pella 2018 Architectural Design Manual Division 08 penings Windows and Doors V250-CM-14
15 SIZE TABLES Fixed Units (381) (368) (457) (445) (610) (711) (762) (813) (597) (699) (749) (800) (914) (902) (1 219) (1 207) (1 372) (1 359) (1 524) (1 511) (1 829) (1 816) pening Frame 1' 3" 14 1/ 2" 1' 6" 17 1/ 2" 2' 0" 2' 4" 23 1 / 2" 27 1/ 2 " 2' 6" 29 1/ 2" 2' 8" 31 1/ 2" 35 3' 0" 1/ 2" 4' 0" 47 1/ 2" 4' 6" 53 5' 0" 59 1/ 2" 1/ 2" 2 6' 0" 71 1/ 2" (381) (368) (457) (445) (711) (610) (699) (597) (762) (749) (813) (800) (914) (902) (1 067) (1 054) (1 118) (1 105) 1' 3" 1' 6" 2' 0" 2' 4" 2' 6" 2' 8" 3' 0" 3' 6" 3' 8" 1 / 2" 41 1 / 2 " 35 1 / 2 " 31 1 / 2 " 29 1 / 2 " 27 1 / 2 " 23 1 / 2 " 17 1 / 2 " 14 1/ 2 " / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / /3-6 T 6-0/ / / / / / / /3-6 T T 1-3/ / / / / / / / / / /3-8 (1 219) (1 207) (1 372) (1 359) (1 524) (1 511) (1 676) (1 664) (1 829) (1 816) 6' 0" 5' 6" 5' 0" 4' 6" 4' 0" 1 / 2" 53 1/ 2" 47 1/ 2" 71 1 / 2" 65 1/ 2" / / / / / / / / / / / / / /4-6 T 1-3/ / / / / / /5-0 T 1-3/ / / / / / / / / / / / / / / / / / / / / / /5-6 T T 1-3/ / / / / / / / / / /6-0 Not to scale. Certain glass aspect ratios may require tempered glass. Pella 2018 Architectural Design Manual Division 08 penings Windows and Doors V250-CM-15
16 DESIGN DATA VENT AND FIXED UNITS Unit Egress Frame (Inches) Clear pening (Inches) (Vent Units nly) Vent Area Ft 2 Visible Ft 2 Standard Thickness (mm) Performance Class & Grade 1 Width Height Width Height Ft 2 Annealed Tempered Vent Fixed 1-3/ /2 14-1/ LC35 1-3/ /2 17-1/2 2-7/8 12-3/ LC35/LC50 LC35 1-3/ /2 23-1/2 2-7/8 18-3/ LC35/LC50 LC35 1-3/ /2 27-1/2 2-7/8 22-3/ LC35/LC50 LC35 1-3/ /2 29-1/2 2-7/8 24-3/ LC35/LC50 LC35 1-3/ /2 31-1/2 2-7/8 26-3/ LC35/LC50 LC35 1-3/ /2 35-1/2 2-7/8 30-3/ LC35/LC50 LC35 1-3/ /2 41-1/2 2-7/8 36-3/ LC35/LC50 LC35 1-3/ /2 43-1/2 2-7/8 38-3/ LC35/LC50 LC35 1-3/ /2 47-1/2 2-7/8 42-3/ LC35/LC50 LC35 1-3/ /2 53-1/2 2-7/8 48-3/ LC35/LC50 LC35 1-3/ /2 59-1/2 2-7/8 54-3/ LC35/LC50 LC35 1-3/ /2 65-1/2 2-7/8 60-3/ LC35/LC50 LC35 1-3/ /2 71-1/2 2-7/8 66-3/ LC35/LC50 LC35 1-6/ /2 14-1/ LC35 1-6/ /2 17-1/2 5-7/8 12-3/ LC35/LC50 LC35 1-6/ /2 23-1/2 5-7/8 18-3/ LC35/LC50 LC35 1-6/ /2 27-1/2 5-7/8 22-3/ LC35/LC50 LC35 1-6/ /2 29-1/2 5-7/8 24-3/ LC35/LC50 LC35 1-6/ /2 31-1/2 5-7/8 26-3/ LC35/LC50 LC35 1-6/ /2 35-1/2 5-7/8 30-3/ LC35/LC50 LC35 1-6/ /2 41-1/2 5-7/8 36-3/ LC35/LC50 LC35 1-6/ /2 43-1/2 5-7/8 38-3/ LC35/LC50 LC35 1-6/ /2 47-1/2 5-7/8 42-3/ LC35/LC50 LC35 1-6/ /2 53-1/2 5-7/8 48-3/ LC35/LC50 LC35 1-6/ /2 59-1/2 5-7/8 54-3/ LC35/LC50 LC35 1-6/ /2 65-1/2 5-7/8 60-3/ LC35/LC50 LC35 1-6/ /2 71-1/2 5-7/8 66-3/ LC35/LC50 LC35 2-0/ /2 14-1/ LC35 2-0/ /2 17-1/ LC35 2-0/ /2 23-1/2 11-7/8 18-3/ LC35/LC50 LC35 2-0/ /2 27-1/2 11-7/8 22-3/ LC35/LC50 LC35 2-0/ /2 29-1/2 11-7/8 24-3/ LC35/LC50 LC35 2-0/ /2 31-1/2 11-7/8 26-3/ LC35/LC50 LC35 2-0/ /2 35-1/2 11-7/8 30-3/ LC35/LC50 LC35 2-0/ /2 41-1/2 11-7/8 36-3/ LC35/LC50 LC35 2-0/ /2 43-1/2 11-7/8 38-3/ LC35/LC50 LC35 2-0/ /2 47-1/2 11-7/8 42-3/ LC35/LC50 LC35 2-0/ /2 53-1/2 11-7/8 48-3/ LC35/LC50 LC35 2-0/ /2 59-1/2 11-7/8 54-3/ LC35/LC50 LC35 2-0/ /2 65-1/2 11-7/8 60-3/ LC35/LC50 LC35 2-0/ /2 71-1/2 11-7/8 66-3/ LC35/LC50 LC35 1 of 3 (1) Maximum performance when glazed with the appropriate glass thickness. Second value, where shown, requires performnace upgrade. Certain glass aspect ratios may require tempered glass. Rev. 05/31/2018 Pella 2018 Architectural Design Manual Division 08 penings Windows and Doors V250-CM-16
17 DESIGN DATA VENT AND FIXED UNITS Unit Egress Frame (Inches) Clear pening (Inches) (Vent Units nly) Vent Area Ft 2 Visible Ft 2 Standard Thickness (mm) Performance Class & Grade 1 Width Height Width Height Ft 2 Annealed Tempered Vent Fixed 2-4/ /2 14-1/ LC35 2-4/ /2 17-1/ LC35 2-4/ /2 23-1/ LC35 2-4/ /2 27-1/2 15-7/8 22-3/ LC35/LC50 LC35 2-4/ /2 29-1/2 15-7/8 24-3/ LC35/LC50 LC35 2-4/ /2 31-1/2 15-7/8 26-3/ LC35/LC50 LC35 2-4/ /2 35-1/2 15-7/8 30-3/ LC35/LC50 LC35 2-4/ /2 41-1/2 15-7/8 36-3/ LC35/LC50 LC35 2-4/ /2 43-1/2 15-7/8 38-3/ LC35/LC50 LC35 2-4/ /2 47-1/2 15-7/8 42-3/ LC35/LC50 LC35 2-4/ /2 53-1/2 15-7/8 48-3/ LC35/LC50 LC35 2-4/ /2 59-1/2 15-7/8 54-3/ LC35/LC50 LC35 2-4/ /2 65-1/2 15-7/8 60-3/ LC35/LC50 LC35 2-4/ /2 71-1/2 15-7/8 66-3/ LC35/LC50 LC35 2-6/ /2 14-1/ LC35 2-6/ /2 17-1/ LC35 2-6/ /2 23-1/ LC35 2-6/ /2 27-1/ LC35 2-6/ /2 29-1/2 17-7/8 24-3/ LC35/LC50 LC35 2-6/ /2 31-1/2 17-7/8 26-3/ LC35/LC50 LC35 2-6/ /2 35-1/2 17-7/8 30-3/ LC35/LC50 LC35 2-6/3-6 E3 29-1/2 41-1/2 17-7/8 36-3/ LC35/LC50 LC35 2-6/ /2 43-1/2 17-7/8 38-3/ LC35/LC50 LC35 2-6/ /2 47-1/2 17-7/8 42-3/ LC35/LC50 LC35 2-6/ /2 53-1/2 17-7/8 48-3/ LC35/LC50 LC35 2-6/ /2 59-1/2 17-7/8 54-3/ LC35/LC50 LC35 2-6/ /2 65-1/2 17-7/8 60-3/ LC35/LC50 LC35 2-6/ /2 71-1/2 17-7/8 66-3/ LC35/LC50 LC35 2-8/ /2 14-1/ LC35 2-8/ /2 17-1/ LC35 2-8/ /2 23-1/ LC35 2-8/ /2 27-1/ LC35 2-8/ /2 29-1/ LC35 2-8/ /2 31-1/2 19-7/8 26-3/ LC35/LC50 LC35 2-8/3-0 E3 31-1/2 35-1/2 19-7/8 30-3/ LC35/LC50 LC35 2-8/ /2 41-1/2 19-7/8 36-3/ LC35/LC50 LC35 2-8/ /2 43-1/2 19-7/8 38-3/ LC35/LC50 LC35 2-8/ /2 47-1/2 19-7/8 42-3/ LC35/LC50 LC35 2-8/ /2 53-1/2 19-7/8 48-3/ LC35/LC50 LC35 2-8/ /2 59-1/2 19-7/8 54-3/ LC35/LC50 LC35 2-8/ /2 65-1/2 19-7/8 60-3/ LC35/LC50 LC35 2-8/ /2 71-1/2 19-7/8 66-3/ LC35/LC50 LC35 2 of 3 Egress Notes: Check all applicable local codes for emergency egress requirements. E = Window meets minimum clear opening of 24" height, 20" width, and 5.7 ft 2. E1 = Window meets minimum clear opening of 24" height, 20" width, and 5.0 ft 2. = With optional side pivot hardware, window meets minimum clear opening of 24" height, 20" width, and 5.7 ft 2. E3 = With optional side pivot hardware, window meets minimum clear opening of 24" height, 20" width, and 5.0 ft 2. To convert areas to square meters (m²), multiply square feet by (1) Maximum performance when glazed with the appropriate glass thickness. Second value, where shown, requires performnace upgrade. Certain glass aspect ratios may require tempered glass. Rev. 05/31/2018 Pella 2018 Architectural Design Manual Division 08 penings Windows and Doors V250-CM-17
18 DESIGN DATA VENT AND FIXED UNITS Unit Egress Frame (Inches) Clear pening (Inches) (Vent Units nly) Vent Area Ft 2 Visible Ft 2 Standard Thickness (mm) Performance Class & Grade 1 Width Height Width Height Ft 2 Annealed Tempered Vent Fixed 3-0/ /2 14-1/ LC35 3-0/ /2 17-1/ LC35 3-0/ /2 23-1/ LC35 3-0/ /2 27-1/ LC35 3-0/ /2 29-1/ LC35 3-0/ /2 31-1/ LC35 3-0/3-0 E1 35-1/2 35-1/2 23-7/8 30-3/ LC35/LC50 LC35 3-0/3-6 E 35-1/2 41-1/2 23-7/8 36-3/ LC35/LC50 LC35 3-0/3-8 E 35-1/2 43-1/2 23-7/8 38-3/ LC35/LC50 LC35 3-0/4-0 E 35-1/2 47-1/2 23-7/8 42-3/ LC35/LC50 LC35 3-0/4-6 E 35-1/2 53-1/2 23-7/8 48-3/ LC35/LC50 LC35 3-0/5-0 E 35-1/2 59-1/2 23-7/8 54-3/ LC35/LC50 LC35 3-0/5-6 E 35-1/2 65-1/2 23-7/8 60-3/ LC35/LC50 LC35 3-0/6-0 E 35-1/2 71-1/2 23-7/8 66-3/ LC35/LC50 LC35 3 of 3 Egress Notes: Check all applicable local codes for emergency egress requirements. E = Window meets minimum clear opening of 24" height, 20" width, and 5.7 ft 2. E1 = Window meets minimum clear opening of 24" height, 20" width, and 5.0 ft 2. = With optional side pivot hardware, window meets minimum clear opening of 24" height, 20" width, and 5.7 ft 2. E3 = With optional side pivot hardware, window meets minimum clear opening of 24" height, 20" width, and 5.0 ft 2. To convert areas to square meters (m²), multiply square feet by (1) Maximum performance when glazed with the appropriate glass thickness. Second value, where shown, requires performnace upgrade. Certain glass aspect ratios may require tempered glass. Rev. 05/31/2018 Pella 2018 Architectural Design Manual Division 08 penings Windows and Doors V250-CM-18
19 DESIGN DATA FIXED UNITS Unit Frame (Inches) Visible Ft 2 Standard Thickness (mm) Width Height Annealed Tempered Performance Class & Grade 1 4-0/ /2 14-1/ LC35 4-0/ /2 17-1/ LC35 4-0/ /2 23-1/ LC35 4-0/ /2 27-1/ LC35 4-0/ /2 29-1/ LC35 4-0/ /2 31-1/ LC35 4-0/ /2 35-1/ LC35 4-0/ /2 41-1/ LC35 4-0/ /2 43-1/ LC35 4-0/ /2 47-1/ LC35 4-0/ /2 53-1/ LC35 4-0/ /2 59-1/ LC35 4-0/ /2 65-1/ LC35 4-0/ /2 71-1/ LC35 4-6/ /2 14-1/ LC35 4-6/ /2 17-1/ LC35 4-6/ /2 23-1/ LC35 4-6/ /2 27-1/ LC35 4-6/ /2 29-1/ LC35 4-6/ /2 31-1/ LC35 4-6/ /2 35-1/ LC35 4-6/ /2 41-1/ LC35 4-6/ /2 43-1/ LC35 4-6/ /2 47-1/ LC35 4-6/ /2 53-1/ LC35 4-6/ /2 59-1/ LC35 4-6/ /2 65-1/ LC35 4-6/ /2 71-1/ LC35 5-0/ /2 14-1/ LC35 5-0/ /2 17-1/ LC35 5-0/ /2 23-1/ LC35 5-0/ /2 27-1/ LC35 5-0/ /2 29-1/ LC35 5-0/ /2 31-1/ LC35 5-0/ /2 35-1/ LC35 5-0/ /2 41-1/ LC35 5-0/ /2 43-1/ LC35 5-0/ /2 47-1/ LC35 5-0/ /2 53-1/ LC35 5-0/ /2 59-1/ LC35 5-0/ /2 65-1/ LC35 5-0/ /2 71-1/ LC35 6-0/ /2 14-1/ LC35 6-0/ /2 17-1/ LC35 6-0/ /2 23-1/ LC35 6-0/ /2 27-1/ LC35 6-0/ /2 29-1/ LC35 6-0/ /2 31-1/ LC35 6-0/ /2 35-1/ LC35 6-0/ /2 41-1/ LC35 6-0/ /2 43-1/ LC35 6-0/ /2 47-1/ LC35 6-0/ /2 53-1/ LC35 6-0/ /2 59-1/ LC35 6-0/ /2 65-1/ LC35 6-0/ /2 71-1/ LC35 (1) Maximum performance when glazed with the appropriate glass thickness. Certain glass aspect ratios may require tempered glass. Pella 2018 Architectural Design Manual Division 08 penings Windows and Doors V250-CM-19
20 DETAILED PRDUCT DESCRIPTINS FRAME verall frame depth: 3-1/4" on all frame types. Frame members are mitered and heat fused to provide a fully welded corner assembly. Sill is fitted with weeps. Frame: [1-1/8" setback nail fin for 2-1/8" wall depth] [Block frame for 3-1/4" wall depth] [Integral flange for 3" wall depth]. Interior and exterior frame surfaces are extruded rigid PVC. SASH Sash members are extruded, rigid PVC [with optional foam insulation 1]. Sash members are mitered and heat-fused to provide a fully welded corner assembly. Contains sealed insulating glass. WEATHERSTRIPPING Vent units include weatherstripping around the sash perimeter with a fin-type, pile and an extruded bulb weatherstrip. GLAZING SYSTEM Quality float glass complying with ASTM C Exterior face-glazed sealed insulating glass. Dual-Pane insulating glass [[annealed] [tempered]] [[Advanced] [NaturalSun] [SunDefense ] [Bronze, Advanced] Low-E coated [with Argon]] [bscure 2] [High Altitude 1]. -or- 1" Triple-Pane [[annealed] [tempered]] [[Advanced] [NaturalSun] Low-E coated [with Argon]] [bscure 2] [High Altitude 1]. INTERIR / EXTERIR Window frame and sash members are [[White] [Almond] [Fossil] with integral color extruded throughout the profiles] [[Brown] [Black] [Brick Red] [Hartford Green] [Morning Sky Gray] [Poplar White] [Portobello] [Tan] [Fossil] exterior, consisting of a solar reflective coating exceeding AAMA 613 test requirements, with White integral color extruded throughout the profiles on the interior]. All exposed PVC surfaces are smooth, glossy and uniform in appearance. HARDWARE Multi-point unison lock with single handle is factory-installed zinc die cast. Lock tie-bars are stainless steel. High quality [steel] [stainless steel] dual-arm roto-operator with fold down crank handle on sill. Hinge arms are [steel] [stainless steel]. Corrosion-resistant fasteners of PVC-compatible material. Hardware finish is [White] [Almond] [Fossil]. INSECT SCREEN Set in aluminum frame and fitted to interior of window. Screen frame finish is baked enamel, color to match interior. Supplied complete with all necessary hardware. Conventional Black Fiberglass Black vinyl coated 18/16 mesh fiberglass screen cloth complying with ASTM D 3656 and SMA PTINAL PRDUCTS Grilles Grilles-Between-the- [Dual-Pane Insulating glass contains [[3/4"] [1"] contoured] [ flat] aluminum grilles permanently installed between two panes of glass] [Triple-Pane Insulating glass contains 3/4" contoured aluminum grilles permanently installed between three panes of glass]. Patterns are [Traditional] [9-Lite Prairie] [Top Row]. Exterior grille color [3/4" Grille is [White] [Almond3] [Fossil 3] [Brown] [Black] [Brick Red] [Hartford Green] [Morning Sky Gray] [Poplar White] [Portobello] [Tan]] [1" Grille is [White] [Almond 3] [Fossil 3]] [ Grille is [White] [Almond 3] [Fossil 3]]. Simulated-Divided-Light grilles without spacer 7/8" Grilles permanently bonded to the interior and exterior of glass. Patterns are [Traditional] [9-Lite Prairie] [Top Row]. Grilles match color of interior and exterior frame. Available only on units glazed with dual-pane insulated glass. Hardware ptional limited opening hardware available for vent units in [White] [Almond] [Fossil] extruded vinyl to match the unit; nominal 3" opening. ptional window opening control device available for field installation. Device allows window to open less than 4" with normal operation, with a release mechanism that allows the sash to open completely. Complies with ASTM F (1) Dual Pane IG High Altitude glazings are available with or without Argon. Triple Pane IG High Altitude glazings are only available without Argon. (2) bscure glass not available with Bronze Advanced Low-E IG. (3) Almond grilles only available on Almond units. Almond units with grilles will have an Almond grille color, Fossil extruded color units with grilles have a Fossil grille color. Rev. 06/26/2018 Pella 2018 Architectural Design Manual Division 08 penings Windows and Doors V250-CM-20
21 PTINAL FAM INSULATIN 3 1/4" AW [83] VENT HEAD LCK JAMB HINGE JAMB PERATR SILL Scale 3" = 1' 0" All dimensions are approximate. Pella 2018 Architectural Design Manual Division 08 penings Windows and Doors V250-CM-21
22 UNIT SECTINS Installation Types STANDARD BLCK FRAME 3 1/4" AW [83] STANDARD NAIL FIN 1 1/8" [29] 1 1/8" [29] 2 1/8" [54] 2 1/4" [58] 2 9/16" [65] 2 1/4" [58] 2 9/16" [65] 2 1/4" [58] 2 9/16" [65] 2 1/4" [58] 3/8" [19] 1 1/8" [29] 3/4" [19] 2 1/8" [54] 2 1/4" [58] 2 9/16" [65] 3/4" 1/4" [6] 3" [77] 2 1/4" [58] 2 9/16" [65] 2 1/4" [58] 2 9/16" [65] 2 9/16" [65] 2 1/4" [58] 2 9/16" [65] BLCK FRAME with INTEGRAL FLANGE 1/4" [6] 2 1/2" [63] 3" [77] NAIL FIN with J-CHANNEL FLUSH FLANGE 2 1/4" [57] GLAZING PTINS 3/4" Insulating 1" Insulating 1" Triple Pane IG 2 1/2" [63] 2 1/2" [63] 2 1/2" [63] Scale 3" = 1' 0" All dimensions are approximate. Pella 2018 Architectural Design Manual Division 08 penings Windows and Doors V250-CM-22
23 UNIT SECTINS Standard Nail Fin 3 1/4" AW [83] VH HJ LJ 13/16" [20] 2 5/16" [59] VH VENT HEAD VS FRAME HEIGHT 2 1/2" [63] VS VENT SILL 2 1/8" [54] 1 1/8" [29] 2 1/2" [63] 2 1/4" [58] 1 1/8" [29] 2 1/4" [58] 1 1/8" [29] HJ HINGE JAMB FRAME WIDTH 1 1/8" [29] LJ LCK JAMB 1 1/8" 2 1/8" [54] 4 9/16" [116] 6 9/16" [167] 2 7/16" [62] 2 7/16" [62] 4 7/16" [113] 4 9/16" Wall 4 9/16" Wall 6 9/16" Wall ptional Factory Applied Wood Jamb Extensions Scale 3" = 1' 0" All dimensions are approximate. Pella 2018 Architectural Design Manual Division 08 penings Windows and Doors V250-CM-23
24 UNIT SECTINS Block Frame 3 1/4" AW [83] 3 1/4" AW [83] FH 2 9/16" [65] FJ FRAME HEIGHT 2 1/4" [58] 2 1/2" [63] VH VS VENT HEAD VENT SILL FRAME WIDTH 1 15/16" [49] 3 1/8" FH FS FIXED HEAD FIXED SILL FS 3 1/8" 2 9/16" [65] 1 15/16" [49] FRAME WIDTH 6 11/16" [170] 5 [143] 13/16" [20] 2 5/16" [59] 3 1/4" [83] 2 1/2" [63] FRAME WIDTH 1/2" [13] FRAME WIDTH TTAL FRAME WIDTH 6 1/8" [156] 13/16" [20] 2 5/16" [59] 3 1/4" [83] 2 1/2" [63] 3 1/8" 3 1/4" [83] FJ FIXED JAMB VIM VERTICAL INTEGRAL MULLIN VH HJ VIM VS HJ HINGE JAMB LJ LCK JAMB LJ LCK JAMB HJ HINGE JAMB VH FH HJ VIM VIM VS FS VIM VERTICAL INTEGRAL MULLIN VIM VERTICAL INTEGRAL MULLIN HJ HINGE JAMB LJ LCK JAMB FJ FIXED JAMB FJ FIXED JAMB LJ LCK JAMB HJ HINGE JAMB FRAME WIDTH 1/2" [13] FRAME WIDTH 1/2" [13] FRAME WIDTH TTAL FRAME WIDTH Scale 3" = 1' 0" All dimensions are approximate. Pella 2018 Architectural Design Manual Division 08 penings Windows and Doors V250-CM-24
HURRICANESHIELD IMPACT-RESISTANT GLASS SECTION DIRECTORY. Size and performance summary. Glazing performance. Grille profiles and patterns.
SECTIN DIRECTRY Size and performance summary Glazing performance Grille profiles and patterns Size tables Design Data Detailed Product Description Cross sections The information published in this document
More informationGeneral Information SECTION DIRECTORY
SECTION DIRECTORY General Information Product Summary... V-AW-2 Product Selection Guide... V-AW-3 Size and Performance Data... V-AW-3 Features and Options... V-AW-3 Sound Transmission Class and Outdoor-Indoor
More informationSize and performance summary. Glazing performance. Grille profiles and patterns. Size tables. Design Data. Detailed Product Description
SCTIN DIRCTRY Size and performance summary Glazing performance Grille profiles and patterns Size tables Design Data Detailed Product Description Cross sections The information published in this document
More informationSIZE AND PERFORMANCE SUMMARY GLAZING PERFORMANCE GRILLE PROFILES AND PATTERNS SIZE TABLES DESIGN DATA DETAILED PRODUCT DESCRIPTION CROSS SECTIONS
SECTIN DIRECTRY SIZE AND PERFRMANCE SUMMARY GLAZING PERFRMANCE GRILLE PRFILES AND PATTERNS SIZE TABLES DESIGN DATA DETAILED PRDUCT DESCRIPTIN CRSS SECTINS The information published in this document is
More informationPella 250 Series. Size and performance summary. Glazing performance. Grille profiles and patterns. Size tables. Design Data
SCTIN DIRCTRY Pella 250 Series DUBL-HUNG Size and performance summary Glazing performance Grille profiles and patterns Size tables Design Data Detailed Product Description Cross sections The information
More informationPella 250 Series. Size and performance summary. Glazing performance. Grille profiles and patterns. Size tables. Design Data
ECTIN DIRECTRY Pella 250 eries FIXED WINDW ize and performance summary Glazing performance Grille profiles and patterns ize tables Design Data Detailed Product Description Cross sections The information
More informationProduct Summary. Pella 250 Series Sliding Window SECTION DIRECTORY
SCTIN DIRCTRY SLIDING WINDW Product Summary Product Selection Guide Size and Performance Data... V250-SW-3 Sound Transmission Class... V250-SW-3 Features and ptions... V250-SW-4 Pella 250 Series Sliding
More informationHURRICANESHIELD IMPACT-RESISTANT GLASS SECTION DIRECTORY. Size and performance summary. Glazing performance. Grille profiles and patterns.
ECTIN DIRECTRY ize and performance summary Glazing performance Grille profiles and patterns ize tables Design Data Detailed Product Description Cross sections The information published in this document
More informationSIZE AND PERFORMANCE SUMMARY GLAZING PERFORMANCE GRILLE PROFILES AND PATTERNS SIZE TABLES DESIGN DATA DETAILED PRODUCT DESCRIPTION CROSS SECTIONS
SECTION DIRECTORY SIZE AND PERFORMANCE SUMMARY GLAZING PERFORMANCE GRILLE PROFILES AND PATTERNS SIZE TABLES DESIGN DATA DETAILED PRODUCT DESCRIPTION CROSS SECTIONS The information published in this document
More informationSize and performance summary. Glazing performance. Grille profiles and patterns. Size tables. Design Data. Detailed Product Description
SCTION DIRCTORY Size and performance summary Glazing performance Grille profiles and patterns Size tables Design Data Detailed Product Description Cross sections The information published in this document
More informationPella 450 Series. Size and performance summary. Glazing performance. Grille profiles and patterns. Size tables. Design Data
SECTION DIRECTORY Pella 450 Series Size and performance summary Glazing performance Grille profiles and patterns Size tables Design Data Detailed Product Description Cross sections The information published
More informationSize and performance summary. Glazing performance. Grille profiles and patterns. Size tables. Design Data. Detailed Product Description
ncompass by Pella SCTION DIRCTORY SINGL-HUNG Size and performance summary Glazing performance Grille profiles and patterns Size tables Design Data Detailed Product Description Cross sections The information
More informationLifestyle Series Casement
Product Selection Guide Size and Performance Data...LS-CM-2 Features and Options...LS-CM-3 Combination Assemblies...LS-CM-4 Glazing Performance Dual-Pane...LS-CM-8 Triple-Pane... LS-CM-10 Grille Types
More informationSize and performance summary. Glazing performance. Grille profiles and patterns. Size tables. Design Data. Detailed Product Description
SECTON DRECTORY Size and performance summary Glazing performance Grille profiles and patterns Size tables Design Data Detailed Product Description Cross sections The information published in this document
More informationSECTION DIRECTORY. Designer Series DS-AW-1 AWNING
SECTION DIRECTORY Designer Series Product Selection Guide Size and Performance Data... DS-AW-2 Features and Options... DS-AW-3 Combination Assemblies... DS-AW-4 Glazing Performance... DS-AW-5 Grille Types
More informationPella Impervia 350 Series Vinyl Awning Windows and Sliding Patio Doors
Pella Impervia 350 Series Vinyl Awning Windows and Sliding Patio Doors Pella 350 Series premium vinyl windows and patio doors are available in a variety of frame types to help ensure a smooth installation
More informationProduct Selection Guide Size and Performance Data...W-HG-2 Features and Options...W-HG-3 Combination Assemblies...W-HG-4 Glazing Performance...
SECTION DIRECTORY Product Selection Guide Size and Performance Data...W-HG-2 Features and Options...W-HG-3 Combination Assemblies...W-HG-4 Glazing Performance...W-HG-6 Grille Types Grille Profiles...W-HG-10
More informationArchitect Series Traditional
SECTION DIRECTORY Architect Series Traditional Product Selection Guide Size and Performance Data...W-HG-2 STC/OITC...W-HG-2 Features and Options...W-HG-3 Combination Assemblies...W-HG-4 Glazing Performance...W-HG-6
More informationSIZE AND PERFORMANCE SUMMARY GLAZING PERFORMANCE GRILLE PROFILES AND PATTERNS SIZE TABLES DESIGN DATA DETAILED PRODUCT DESCRIPTION CROSS SECTIONS
SCTION DIRCTORY SIZ AND PRFORMANC SUMMARY GLAZING PRFORMANC GRILL PROFILS AND PATTRNS SIZ TABLS DSIGN DATA DTAILD PRODUCT DSCRIPTION CROSS SCTIONS The information published in this document is believed
More informationSIZE AND PERFORMANCE SUMMARY GLAZING PERFORMANCE GRILLE PROFILES AND PATTERNS SIZE TABLES DESIGN DATA DETAILED PRODUCT DESCRIPTION CROSS SECTIONS
SCTION DIRCTORY DOUBL-HUNG SIZ AND PRFORMANC SUMMARY GLAZING PRFORMANC GRILL PROFILS AND PATTRNS SIZ TABLS DSIGN DATA DTAILD PRODUCT DSCRIPTION CROSS SCTIONS The information published in this document
More informationSIZE AND PERFORMANCE SUMMARY GLAZING PERFORMANCE GRILLE PROFILES AND PATTERNS SIZE TABLES DESIGN DATA DETAILED PRODUCT DESCRIPTION CROSS SECTIONS
ECTIN DIRECTRY IZE AND PERFRMANCE UMMARY GLAZING PERFRMANCE GRILLE PRFILE AND PATTERN IZE TABLE DEIGN DATA DETAILED PRDUCT DECRIPTIN CR ECTIN The information published in this document is believed to be
More informationGeneral Information. Product Details SECTION DIRECTORY
SCTION DIRCTORY DOUBL-HUNG General Information Product Summary... F-DH-2 Size and Performance Data... F-DH-3 Sound Transmission Class... F-DH-3 Features and Options... F-DH-4 Glazing Performance... F-DH-5
More informationArchitect Series Designer Series Pella ProLine. Architect Series...AW-1 Designer Series...AW-2 Pella ProLine...AW-2
SECTION DIRECTORY Brand Directory Architect Series...AW-1 Designer Series...AW-2 Pella ProLine...AW-2 General Information Brand Summary...AW-3 Product Selection Guide Size and Performance Data...AW-4 Features
More informationArchitect Series Traditional
SECTION DIRECTORY Product Selection Guide Size and Performance Data... OSBF-2 Glazing Performance... OSBF-3 Grille Types... OSBF-7 Design Data Vent... OSBF-11 Detailed Product Descriptions... OSBF-14 Unit
More informationSIZE AND PERFORMANCE SUMMARY GLAZING PERFORMANCE COMBINATIONS GRILLE PROFILES AND PATTERNS CUSTOM SHAPES AND SIZES DETAILED PRODUCT DESCRIPTION
ECTIN DIRECTRY PECIAL APE IZE AND PERFRMANCE UMMARY GLAZING PERFRMANCE CMBINATIN GRILLE PRFILE AND PATTERN CUTM APE AND IZE DETAILED PRDUCT DECRIPTIN CR ECTIN The information published in this document
More informationSECTION DIRECTORY. Designer Series W-OSD-1 OUT-SWING DOOR
SECTION DIRECTORY Designer Series Product Selection Guide Size and Performance Data... W-OSD-2 Features and Options... W-OSD-4 Combination Assemblies... W-OSD-5 Glazing Performance... W-OSD-6 Grille Types
More informationSIZE AND PERFORMANCE SUMMARY GLAZING PERFORMANCE GRILLE PROFILES AND PATTERNS SIZE TABLES DESIGN DATA DETAILED PRODUCT DESCRIPTION CROSS SECTIONS
SCTON DRCTORY SZ AND PRFORMANC SUMMARY GLAZNG PRFORMANC GRLL PROFLS AND PATTRNS SZ TABLS DSGN DATA DTALD PRODUCT DSCRPTON CROSS SCTONS The information published in this document is believed to be accurate
More informationSmooth, clean lines for a higher quality look than ordinary vinyl. Exceptional energy efficiency with double- and triple-pane glass options
VINYL Pella 250 Series $$ FEATURES Smooth, clean lines for a higher quality look than ordinary vinyl Exceptional energy efficiency with double- and triple-pane glass options Popular colors and features
More informationCHAPTER 3 INTEGRITY WOOD ULTREX DOUBLE HUNG
CHAPTER 3 INTEGRITY WOOD ULTREX DOUBLE HUNG Specifications / NFRC Values... 3.2 Egress, Lite and Vent Measurements... 3.3 Egress, Lite and Vent Measurements / Abbreviations... 3.4 Sizing Guidelines / Measurement
More informationSpecifications... Quick Spec Guide...
TABLE OF CONTENTS Specifications........................................... Quick Spec Guide....................................... Elevations/Sizes: 1/4" Scale Full Awning Units..................................
More informationDF COLLECTION. Architectural Detail Guide Hybrid Awning Window DF 3113 TABLE OF CONTENTS
TABLE OF CONTENTS Specifications... 1-2 Quick Spec Guide... 1-3 Clear Opening and Daylight Specifications... 1-5 General Information Multiple Assemblies... 1-6 Handing and Operation... 1-7 Elevation Drawing
More informationArchitectural Manual. Vinyl Windows & Patio Doors
Architectural Manual Vinyl Windows & Patio Doors Style Line Series Vinyl Windows & Patio Doors Instructions on how to use this manual: This document has been designed for easy navigation and to quickly
More informationSliding Patio Doors Builders Vinyl
TABLE OF CONTENTS Specifications... 7-2 QuickSpecGuide... 7-3 Elevations/Sizes: 1/4 Scale 2-Panel... 7-4 3-Panel... 7-5 2-Panel withtransom... 7-6 Sidelite... 7-8 Transom... 7-9 3-PanelTransom... 7-10
More informationSECTION DIRECTORY W-FW-1 FIXED WINDOW
ECTION DIRECTORY Fixed ash In Frame General Information Product Matrix...W-FW-1 ound Transmission Class and Outdoor-Indoor Transmission Class...W-FW-4 Product election Guide ize and Performance Data...W-FW-4
More informationCasement Windows Builders Clad-Wood
TABL OF CONTNTS Specifications... 1-2 QuickSpecGuide... 1-3 levations: 1/4 Scale Casement... 1-4 CasementPicture... 1-13 CasementTransom... 1-15 CasementRadius... 1-18 Grille Patterns... 1-20 ClearOpeningandDaylightSpecifications...
More informationNatural beauty of wood with low-maintenance aluminum-clad exteriors. Unique, factory-assembled combinations without the custom price tag
WOOD Pella 450 Series $$ $$$ FEATURES Natural beauty of wood with low-maintenance aluminum-clad exteriors Unique, factory-assembled combinations without the custom price tag Most popular features and options,
More informationDESIGN DATA - CURVED SHAPES Wood and Aluminum-Clad Exteriors
DESIGN DT - CURVED SHPES Wood and luminum-clad Exteriors Curved Shapes - Frame cannot exceed 96" in both directions. For units with colored glazing (bronze, gray or green), frame cannot exceed 11' 0-3/4"
More informationElaine Sagers, Vice President Pella Corporation, January 18, 2016
Manufacturer s Certification Statement Pertaining to the American Taxpayer Relief Act of 2012 and the Tax Increase Prevention Act of 2014 Pella Windows and Doors Pella Corporation This Manufacturer s Certification
More informationTEA2 Architects LAKE SUPERIOR RESIDENCE TECHNICAL GUIDE C AWNING WINDOWS
TEA2 Architects LAKE SUPERIOR RESIDENCE TECHNICAL GUIDE C AWNING WINDOWS PRODUCT FEATURES STYLES Traditional, Push Out and Mission options. STANDARD FEATURES Natural, clear Douglas Fir interior (no visible
More informationArchitect Series Traditional
SECTION DIRECTORY Product Selection Guide Size and Performance Data... LSPD-2 Grille Types... LSPD-3 Size Dimensions and Panel Configurations... LSPD-5 Design Data Vent and Fixed... LSPD-7 Detailed Product
More informationTechnical Guide B Casement Windows. Casement Windows. Technical Guide B1
B Technical Guide B Casement Windows Technical Guide B1 Product Features Styles Traditional, Push Out and Mission options. Standard Features Natural, clear Douglas Fir interior (no visible finger joints)
More informationBELVEDERE PROJECT TECHNICAL GUIDE ACCESS WINDOWS
BELVEDERE PROJECT TECHNICAL GUIDE ACCESS WINDOWS PRODUCT FEATURES SPECIFICATIONS STYLES, Double and Push Out options. FEATURES Natural Douglas Fir interior (no visible finger joints) (116 mm) jamb construction
More informationWood and Aluminum EnduraClad Exterior 6' 8" and 6' 10" Size Tables
6' 8" and 6' 10" Size Tables Scale 1/8" = 1' 0" All doors and sidelights are glazed with tempered glass. For windows and patio doors with HurricaneShield impact-resistant glass, see product instructions
More informationTechnical Guide C. CAwning Windows. Technical Guide C1
Technical Guide C Windows C Technical Guide C1 Product Features Specifications Styles Traditional, Push Out and Mission options. Standard Features Natural, clear Douglas Fir interior (no visible finger
More informationV3 Series Awning Windows (2011 to Present)
What s in This Section Standard and Custom Windows...................................... Page 3 Parts Illustration........................................................... 3 Options- Exterior..................................................
More informationSliding Windows Brickmould Vinyl
TABL OF CONTNTS Specifications........................................................... 6-2 Quick Spec Guide....................................................... 6-3 levations/sizes: 1/4 Scale 2-Wide
More informationGuide Specification SECTION VINYL WINDOWS
February 2018 3948 Townsfair Way, Suite 200 Columbus, Ohio 43219 Toll Free 800-746-6686 Website www.simonton.com Email archdetails@simonton.com Guide Specification Specifier Notes: This guide specification
More informationALUMINUM HORIZONTAL ROLLER WINDOW
ALUMINUM HORIZONTAL ROLLER WINDOW Series HR610 Monolithic glazing does not provide hurricane protection. Specifications: Window members are extruded from a minimum of 6063-T5 aluminum alloy Frame members
More informationSliding Patio Doors Flat Casing Vinyl
TABLE OF CONTENTS Specifications... 5-2 QuickSpecGuide... 5-3 Elevations/Sizes: 1/4 Scale 2-PanelSlidingPatioDoors... 5-4 2-PanelSlidingPatioDoorswithTransoms... 5-5 Transoms... 5-7 Sidelights... 5-9 SectionDetails...
More informationDOUBLE/SINGLE HUNG WINDOWS
E2 Robson Bilgen Architects NEW ENGLAND COUNTRY HOUSE TECHNICAL GUIDE E /SINGLE HUNG WINDOWS PRODUCT FEATURES SPECIFICATIONS STYLES GLAZING STANDARDS SIMULATED DIVIDED LITES (SDL) E2 Double Hung, Single
More informationSingle-Hung Windows Premium Atlantic Vinyl
TABL OF CONTNTS Specifications... 3-2 QuickSpecGuide... 3-3 levations/sizes: 1/4 Scale Single-Hung... 3-4 ImpactSingle-Hung... 3-10 GlazingOptions: Scale... 3-11 Grille Patterns... 3-12 SectionDetails:
More informationThe Falcon Series... Setting The Standard
The Falcon Series... Setting The Standard Product Feature Guide 3/4 Insulated Glass 6100 XJC/A 2100 1100 C/A Clear S S S S S Emax Plus O O O O O Emax Ultra O O O O O Bronze Tint O O O O O Grey Tint O O
More informationVisions 2000 Double Hung Tilt Window Parts Reference Catalog
Visions 2000 Double Hung Tilt Window Parts Reference Catalog (Includes Parts and Information for Double Hung Tilt Oriel and Double Hung Tilt Picture) #010636 (Revised 01/03) Weather Shield Mfg., Inc. Medford,
More informationArchitect Series Contemporary
rchitect Series Contemporary SECTION DIRECTORY roduct Selection Guide Size and erformance Data...BF-2 Glazing erformance...bf-4 Grille Types...BF-8 Design Data Vent...BF-10 Detailed roduct Descriptions...BF-15
More informationEuroview Vinyl Tilt/Turn, Hopper & Picture Windows
Unit Features Frame: Frame Thickness: 70mm (2 3/4") Frame Width: 67mm (2 5/8") or 80mm (3 5/32") Steel Reinforced Sash: Sash Thickness: 70mm (2 3/4") Sash Width: 80mm (3 5/32") Steel Reinforced Shape Options:
More information81870 Alside_24667 Alside 11/3/16 5:01 PM Page 2 80 Series
80 Series Alpine s 80 Series is the ultimate in vinyl window technology. Our heavy-duty vinyl frames combined with 1" insulated, Low-E glass, make these windows some of the most energy-efficient produced.
More informationSeries A L L - E N V I R O N M E N T V I N Y L W I N D O W S S T R E N G T H P E R F O R M A N C E E F F I C I E N C Y
70 Series A L L - E N V I R O N M E N T V I N Y L W I N D O W S S T R E N G T H P E R F O R M A N C E E F F I C I E N C Y A N E W C O N S T R U C T I O N W I N D O W B U I L T F O R E X C E P T I O N A
More informationTEA2 Architects LAKE SUPERIOR RESIDENCE TECHNICAL GUIDE AWNING WINDOWS
TEA2 Architects LAKE SUPERIOR RESIDENCE TECHNICAL GUIDE AWNING WINDOWS PRODUCT FEATURES SPECIFICATIONS STYLES GLAZING S DING Traditional, Push Out and Mission options. FEATURES Natural, clear Douglas Fir
More informationAluminum Series SH600 Product Specifications
Product Specifications Monolithic glazing does not provide hurricane protection. Specifications: Window members are extruded from a minimum of 6063-T5 aluminum alloy Frame members have a nominal depth
More informationSiteline EX Clad Casement Windows Premium Wood
TABLE OF CONTENTS Specifications... 1-2 QuickSpecGuide... 1-4 Elevations:1/4 Scale... 1-6 Casement... 1-9 CasementPicture... 1-23 CasementPicturewithFlankers... 1-29 CasementSectorTop... 1-34 SashGlazingOptions:3
More informationTuscany Series Montecito Series
Tuscany Series Montecito Series Premium Vinyl Windows & Patio Doors Architectural Manual Instructions on how to use this manual: This document has been designed for easy navigation and to quickly click
More informationProduct Guide Specification
October 2011 3948 Townsfair Way, Suite 200 Columbus, Ohio 43219 Toll Free 800-746-6686 Website www.simonton.com E-Mail archdetails@simonton.com Product Guide Specification Specifier Notes: This product
More informationLUXURY SLIDING PATIO & SWINGING FRENCH DOORS
M A L I B U LUXURY SLIDING PATIO & SWINGING FRENCH DOORS M A L I B U THE BEAUTY OF YOUR HOME Malibu Sliding Patio and Swinging French Doors enhance the beauty of your home, both inside and out. Each door
More informationProduct Guide Specification
July 2013 3948 Townsfair Way, Suite 200 Columbus, Ohio 43219 Toll Free 800-746-6686 Website www.simonton.com E-Mail archdetails@simonton.com Product Guide Specification Specifier Notes: This product guide
More informationNote: PGT reserves the right to change material design and/or construction without notice or liability Window Height
ALUMINUM SINGLE HUNG WINDOW Series SH600 Monolithic glazing does not provide hurricane protection. Specifications: Window members are extruded from a minimum of 6063-T5 aluminum alloy Frame members have
More informationNFRC U-FACTOR, SHGC / VT, CONDENSATION RESISTANCE COMPUTER SIMULATION REPORT. Rendered to: EARTHWISE GROUP, L.L.C.
Architectural Testing NFRC U-FACTOR, SHGC / VT, CONDENSATION RESISTANCE COMPUTER SIMULATION REPORT Rendered to: EARTHWISE GROUP, L.L.C. SERIES/MODEL: 143.095 DH 143.195 DH 145.095 DH 145.195 DH Baseline
More informationGliding Windows Premium Vinyl
TABL OF CONTNTS Product Specifications... 6-2 Quick Spec Guide........................................................ 6-3 levations/sizes: 1/4 Scale 2WideGlidingWindow... 6-4 3WideGlidingWindow... 6-8
More informationCasement Windows Premium Atlantic Vinyl
TABL OF CONTNTS Specifications... 1-2 QuickSpecGuide... 1-3 levations/sizes: 1/4 Scale FullCasement... 1-4 FullImpactCasement... 1-6 GlazingOptions: 3 Scale... 1-7 Grille Patterns... 1-8 SectionDetails:
More informationSentinel Single Hung Window 110
Available Finishes: White & Bronze Standard Glass Colors: Clear, Gray, Dark Gray (Turtle Code), Bronze, Solexia Green, Azuria Blue, White Interlayer, Mist (Pattern 62), Rain Sentinel Single Hung Window
More informationSeries A L L - E N V I R O N M E N T V I N Y L W I N D O W S S T R E N G T H P E R F O R M A N C E E F F I C I E N C Y
70 Series A L L - E N V I R O N M E N T V I N Y L W I N D O W S S T R E N G T H P E R F O R M A N C E E F F I C I E N C Y A N E W C O N S T R U C T I O N W I N D O W B U I L T F O R E X C E P T I O N A
More informationArchitect Series Traditional
SECTION DIRECTORY rchitect Series Traditional roduct Selection Guide Size and erformance Data...BF-2 Glazing erformance...bf-4 Grille Types...BF-8 Design Data Vent...BF-10 Detailed roduct Descriptions...BF-15
More informationDurable, easy-care vinyl that will look great for years. Energy-efficient options that keep your home more comfortable
VINYL Encompass by Pella $ $$ FEATURES Durable, easy-care vinyl that will look great for years Energy-efficient options that keep your home more comfortable High-grade vinyl frames at budget-friendly prices
More informationCONSTRUCTION CONSULTING LABORATORY, INTERNATIONAL
TEST REPORT: SERIES 8220 ALUMINUM SINGLE HUNG WINDOW Prepared for: 5625 E. Firestone Boulevard South Gate, CA 90280 1601 Luna Road S-UNITED, INC. Office: (972) 242-0556 Carrollton, Texas 75006 A Quality
More informationNFRC U-FACTOR, SHGC / VT, CONDENSATION RESISTANCE COMPUTER SIMULATION REPORT. Rendered to: EARTHWISE GROUP, L.L.C.
Architectural Testing NFRC U-FACTOR, SHGC / VT, CONDENSATION RESISTANCE COMPUTER SIMULATION REPORT Rendered to: EARTHWISE GROUP, L.L.C. SERIES/MODEL: 143.095 SH 145.095 SH 143.095 SH Common Head Baseline
More informationWarranty, Parts & Install Info 1. Series 4600 Double Hung Windows 2. Series 4710 Casement Windows 3. Series 9000 Sliding Patio Door 4
Warranty, Parts & Install Info 1 Series 4600 Double Hung Windows 2 Series 4710 Casement Windows 3 Series 9000 Sliding Patio Door 4 Series 9200 Inswing Doors 5 Series 9300 Outswing Doors 6 Series 9380 Outswing
More informationSINGLE SLIDING WINDOW 1000 SERIES 4-1/2" FRAME SINGLE SLIDER LIFT OUT
PERFORMANCE EVALUATION OF SINGLE SLIDING WINDOW 1000 SERIES 4-1/2" FRAME SINGLE SLIDER LIFT OUT For Dominion Doors & Windows Ltd. IN ACCORDANCE WITH: AAMA/WDMA/CSA 101/I.S.2/A440-11 AND A440S1-17 Report
More informationArchitect Series Traditional. ONE-WAY (PASSAGE-DOOR) Min-Frame- Width-(Inches) Max-Frame- Width-(Inches)
SIZE DIMENSIONS Size-Dimensions NUMBER-OF- PANELS ONE-WAY (NO-PASSAGE-DOOR) ONE-WAY (PASSAGE-DOOR) (NO-PASSAGE-DOOR) (PASSAGE-DOOR) 2-PANEL 31-11/16 87-3/16 3-PANEL 46-1/8 129-3/8 46-15/16 130-3/16 4-PANEL
More informationIntelligent Design. Superior Performance.
by Thermo-Tech Premium Windows and Doors Intelligent Design. Superior Performance. Designed and manufactured to provide cost-saving energy efficiency, exceptional safety and security, and premium comfort
More informationTechnical Guide E. EDouble/Single Hung Windows. Technical Guide E1
Technical Guide E Double/Single Hung Windows E Windows Technical Guide E1 Product Features Specifications Styles Double Hung, Single Hung, Radius Top and Cottage options. Standard Features Natural, clear
More informationAAMA/WDMA/CSA 101/I.S.2/A TEST REPORT. Rendered to: MASTER WINDOW SYSTEMS, INC.
AAMA/WDMA/CSA 101/I.S.2/A440-05 TEST REPORT Rendered to: MASTER WINDOW SYSTEMS, INC. SERIES/MODEL: Master 2000 Double Hung Window PRODUCT TYPE: PVC Double Hung Window Summary of Results Title Test Specimen
More informationStyleGuard. Impact-Resistant Windows and Doors Edition
StyleGuard Impact-Resistant Windows and Doors 07 Edition Options & Accessories 3 CONTENTS Double-Hung Windows 5 Casement Windows 6 Transom Windows 7 Picture Windows 8 Geometric Windows 9 Arch & Eyebrow
More information3948 Townsfair Way, Suite 200 July 2013 Columbus, Ohio Toll Free Website
3948 Townsfair Way, Suite 200 July 2013 Columbus, Ohio 43219 Toll Free 800-746-6686 Website www.simonton.com E-Mail archdetails@simonton.com Product Guide Specification Specifier Notes: This product guide
More informationSingle-Hung Tilt Windows Builders Vinyl
TABL OF CONTNTS Specifications........................................................... 4-2 Quick Spec Guide....................................................... 4-3 levations:/sizes 1/4 Scale Single-Hung
More informationDouble Hung. Power Lift 28,000 Constant Force
Insul-Tec Double Hung Stylish Full 3¼ Depth Welded Mainframe with beveled colonial exterior curves that are not only beautiful, but also allow for maximum weld surface resulting in outstanding strength
More informationWA67 Folding System - Aluminum Clad Over Wood
TABLE OF CONTENTS WA67 WA67 Folding System - Aluminum Clad Over Wood Features.......................................................................................................................... 1
More informationMilgard Windows & Doors. Training Module Ultra and WoodClad Windows & Doors
Milgard Windows & Doors Training Module Ultra and WoodClad Windows & Doors Why Fiberglass? Structural integrity - no warping, swelling, rotting Strength - high tensile strength 8x stronger than vinyl Up
More informationNFRC U-FACTOR, SHGC / VT, CONDENSATION RESISTANCE COMPUTER SIMULATION REPORT. Rendered to: EARTHWISE GROUP, L.L.C. SERIES/MODEL: SS 145.
Architectural Testing NFRC U-FACTOR, SHGC / VT, CONDENSATION RESISTANCE COMPUTER SIMULATION REPORT Rendered to: EARTHWISE GROUP, L.L.C. SERIES/MODEL: 143.095 SS 145.095 SS Baseline Product for Validation
More informationNFRC U-FACTOR, SHGC / VT, CONDENSATION RESISTANCE COMPUTER SIMULATION REPORT. Rendered to: EARTHWISE GROUP, L.L.C.
Architectural Testing NFRC U-FACTOR, SHGC / VT, CONDENSATION RESISTANCE COMPUTER SIMULATION REPORT Rendered to: EARTHWISE GROUP, L.L.C. SERIES/MODEL: 143.191 Casement / Awning / Fixed Baseline Product
More informationVINYL WINDOWS & DOORS
VINYL WINDOWS & DOORS By FLEETWOOD FLEETWOOD FleetwoodUSA.com HIGH-PERFORMANCE VINYL WINDOWS Energy Efficient Means Smaller Energy Bills Because vinyl windows and doors keep cold air out in winter and
More informationyour vision, our windows
your vision, our windows WHY FIBERGLASS? ENERGY EFFICIENCY ALUMINUM 500x lower thermal conductivity than aluminum, so it doesn t allow heat or cold from the outside into your home. Fiberglass uses 78%
More informationPrimed Casement Windows (1932 to 1989)
Primed Casement Windows (1932 to 1989) Parts Catalog Main Menu Section TOC Search What s in This Section Standard and Picture Windows...................................... Page 3 Parts Illustration...........................................................
More informationVisions 3000 Series 924 Parts Catalog
3000 Series Visions 3000 Series 924 Parts Catalog #1218583 FOR PRODUCT PRODUCED AFTER 4/07 Casement Casement Awning awning French Casement french casement Visions Windows and Doors 880 South View Drive
More informationPrimed Casement Windows (1932 to 1989)
Primed Casement Windows (1932 to 1989) Parts Catalog Main Menu Section TOC Search What s in This Section Standard and Picture Windows...................................... Page 3 Parts Illustration...........................................................
More informationPrimed Epicr Radius and Geometric Windows - In-Sash Custom Wood
TABLE OF CONTENTS Specifications... 20-2 QuickSpecGuide... 20-4 Elevations/Sizes:1/4 Scale... 20-6 Casement Half Round Units... 20-8 Casement Quarter Round Units... 20-9 Double-Hung Half Round Units...
More informationStyleGuard IMPACT- When the storm is at its worst, our performance is at its best. RESISTANT WINDOWS DOORS AND
StyleGuard IMPACT- RESISTANT WINDOWS AND DOORS When the storm is at its worst, our performance is at its best. Backed by a Limited Lifetime Warranty YKK AP Stands behind the quality of every StyleGuard
More informationAluminum Wood Double-Hung Windows
Replacement Parts Table of Contents Exploded View... 38 Parts List... 39 Liners and Stops... 40 --- 41 Picture Glass Bead and Cutting Schedule... 41 Picture Glass... 42 --- 43 Sash Assembly... 44 --- 47
More informationFrench View Primed Hinged Patio Doors Premium Wood
TABLE OF CONTENTS Specifications... 12-2 QuickSpecGuide... 12-4 Elevations:1/4 Scale... 12-5 In-SwingDoors... 12-7 CenterHingeDoors... 12-10 Out-SwingDoors... 12-12 GlazingOptions:3 Scale... 12-16 TrimOptions:3
More information6100 SERIES SINGLE HUNG
STORMSTRONG IMPACT RESISTANT 6100 SERIES SINGLE HUNG 1. 8 0 0. 3 2 7. 3 0 8 6 w w w. C W S. c c STORMSTRONG Impact Resistant Single Hung Windows Storm Strong 6100 Series Single Hung 1-1/2 pre-punched Nail
More informationReplacement Door Bottom for Pease style doors MD /16 Beige 6 $13.20
Triple fin vinyl seal Superior for uneven floors Triple Fin Aluminum & Vinyl Door Sweep MD05090 05090 36 Aluminum 6 $8.00 MD05173 05173 36 Dark Bronze 6 $10.20 Rigid vinyl with soft vinyl sweep Sticks
More informationSPECIAL SIZE FRAME DIMENSIONS New Construction Frame 2-11/16" Frame Depth East, West and Florida Regions
ncompass by Pella SPCIAL SIZ FRAM DIMNSIONS New Construction 2-/6 Depth ast, West and Florida Regions XO OR OX VNT UNITS XOX VNT UNITS WST 2-/2 W x 9 H (546 x 229) WST 73-/2 W or 60 H or 40 ft 2 ( 867)
More information