Clad Epicr In-Swing Patio Doors Custom Wood

Transcription

1 Clad Epicr In-wing Patio Doors TABLE OF CONTENT pecifications QuickpecGuide Elevations/izes:1/8 cale PanelUnits PanelUnits GlazingOptions TrimOptions Rail,Panel&illOptions Mullion Details Grille & DL Patterns Unit izing, Rough Openings & Masonry Openings ectiondetails:3 cale December 2011 JELD-WEN reserves the right to change specifications without notice. Page 25-1

2 Clad Epicr In-wing Patio Doors PRODUCT PECIFICATION EXTERIOR FINIH Exterior aluminum surfaces are finished with a fluoropolymer (70% Kynar 500 R ) multi-coat finish system to meet the performance standards required by AAMA specification # standard colors include Brilliant White, Chestnut Bronze, Desert and, French Vanilla, Hartford Green, Mesa Red, Black Licorice, Heirloom White, Hunter Green, Redwood, age Brown, moke, and more. Three copper finishes are available on door panels. AURALAT R WOOD AuraLast R wood is fundamentally different from wood treated in traditional millwork preservation processes in that it uses a proprietary vacuum/pressure process to provide protection throughout the wood parts used to make windows and doors. AuraLast R wood is distinguished from wood using traditional preservation methods by its unique ability to achieve greater penetration of the active ingredients into the wood parts, with a minimum treatment penetration of 92%. INTERIOR FINIH All interior surfaces are unfinished clear pine ready for on-site finishing. Optional interior wood species include vertial grain Douglas Fir, Mahogany and Knotty Alder. Primed interior also available. FRAME Frame is assembled from select kiln-dried pine AuraLast R wood on all exterior parts. Exterior surface is covered with.050 gauge extruded aluminum cladding. tandard jamb width is 4-9/16. PANEL 1-23/32 thick select kiln-dried pine AuraLast R wood. Exterior surface is covered with.024 gauge roll formed aluminum cladding. The top and bottom rails are formed from solid Western Pine veneers laminated to a kiln dried edge-and-end-glued core, while the stiles have the same veneer laminated to a Timberstrand core. The standard layout is 6-5/8 top rail and stiles, and a 10-1/4 bottom rail. GLAZING Insulating glass is constructed from two panes of tempered glass, utilizing a continuous roll formed stainless steel spacer with dual seal sealant. A computer-controlled application of clear silicone is used to bed the exterior of the insulating glass into the panel. An acrylic sealant is used to bed the interior. All insulating glass units comply with the performance requirements of IGCC in accordance with either ATM E774 or E2190. GLAZING OPTION - TEMPERED Tempered insulating glass available in Low-E with Argon, Low-E, Low-E 366, Clear, Neat Glass, eedy Reamy, tinted, reflective, or obscure, or other specialty glass as specified. Preserve film is a thick polyethylene film with a low tack acrylic adhesive applied to the glass for protection during shipping and installation. Installations at 4,000 foot elevations and higher require a capillary tube to equalize environmental stress (otherwise known as High Altitude glazing). High altitude glazing does not allow the use of Argon as listed under glazing options. WEATHER-TRIPPING Engineered system with dual foam filled bulb seal compressed between the exterior of the panel and the frame in a continuous plane on all four sides. A Pemko two-piece adjustable astragal is applied to each panel on double door applications. ILL The sill is a dark bronze anodized aluminum, 1/2 high to meet the standards set forth by the ADA for handicap access. A door shoe/kick plate with an integral sweep is applied to the panel. HARDWARE The door panels are mounted into the frame utilizing steel based ball bearing hinges in Brushed Chrome, Polished Brass or Oil-Rubbed Bronze. The door panels are not bored for handle sets. GRILLE DL (imulated Divided Lites) - extruded aluminum muntins permanently applied to the exterior of the insulating glass unit (not available on textured glass) in 5/8, 7/8, 1-1/8, or 1-3/8 widths. Profiles are bead stop in all widths, and a putty profile in 5/8, 7/8, and 1-1/8 widths only. 1 Copper DL is also available. DL is standard with a light bronze internal shadow bar to give a true divided lite appearance. As an option, DL may be ordered with a silver shadow bar. Clear wood interior muntin bars match the exterior muntin width and are permanently bonded to the interior of the glass. Also available is a 2-5/16 DL bar, which simulates a double-hung checkrail. Full-urround Removable Wood Grilles - Rectangular, unfinished interior clear pine wood grilles in 7/8, 1-1/8, and 1-3/8 are available in patterns selected by the owner. GBG (Grilles between the Glass) - 5/8 flat, 23/32 contour, or 1 contour grilles mounted between the glass panes suspended within the air cavity. EXTERIOR TRIM Nail flange and drip cap standard with optional extruded aluminum brickmould, 3-1/2 flat, 3-1/2 Adams and Heritage trims. Optional mull covers to accommodate 1 (spread only), 2, 3-1/2 and 6 spread and stud pocket mull. EXTENION JAMB Extension jambs are available for wall depths up to 6-11/16. INTALLATION Installation per JELD-WEN Installation Method for Metal Clad Patio Doors. ee for instructions. ee for architectural and performance information. December 2011 JELD-WEN reserves the right to change specifications without notice. Page 25-2

3 PECIFICATION EXTERIOR FINIH Brilliant White Chestnut Bronze Desert and French Vanilla Mesa Red Hartford Green Black Licorice Heirloom White Hunter Green Redwood age Brown moke Artic ilver Dark Chocolate Black Emerald Bone White Bronze Buckskin Cambridge White Capri Blue Cascade Clad Epicr In-wing Patio Doors TANDARD FEATURE QUICK PEC GUIDE Champagne Clover Mist Dark Buckskin Dark Ivy Deep ummer Garnet Haverstraw Hudson Blue Ivory Ivy Liberty Blue Mocha Cream Mosiac Green Pueblo Tan Rosewood carlet Haze ea Foam Teal Wedgewood White OPTIONAL FEATURE ome options may require additional lead times. Consult your JELD-WEN ales Representative. Custom Color Matching EXTERIOR TRIM Drip Cap & Integral Nailing Fin Extruded Aluminum Brickmould Adams Casing INTERIOR WOOD Western Pine Knotty Alder Vertical Grain Douglas Fir Mahogany INTERIOR FINIH Natural Priming Available Panel Only: Bright Copper peckled Patina Copper Hand Rubbed Patina Copper 3-1/2 Flat Casing Heritage Casing Folding Nailing Fin IZE Width: 3-0, 3-6, 3-8, 6-0, 7-0 Height:6-8,7-0,8-0,9-0 GLAZING (ALL TEMPERED) Low-E Tempered Insulating Glass (with Argon) Low-E 366 Preserve Protective Film Pre-finished Interior Options are: Paint - Pure White, Extra White, Natural Choice, Moderate White tain - Wheat, Fruitwood, Cherry, Cordovan, Cider Clear Lacquer Any Width: 36 to 44 Any Height: 80 to 108 Clear Obscure Tints: Bronze, Gray, Green Reflective Glue Chip afety Laminate in Clear, Bronze or Gray Neat Glass eedy Reamy Rain Narrow Reed Tempered andblasted Impact Resistant High Altitude (Breather Tube, no Argon) Continued on next page December 2011 JELD-WEN reserves the right to change specifications without notice. Page 25-3

4 Clad Epicr In-wing Patio Doors PECIFICATION TANDARD FEATURE QUICK PEC GUIDE OPTIONAL FEATURE ome options may require additional lead times. Consult your JELD-WEN ales Representative. GRILLE DL Bead Profile: 5/8, 7/8, 1-1/8, 1-3/8, 2-5/16 with Light Bronze hadow Bar 5/8, 7/8, 1-1/8, 1-3/8, 2-5/16 with ilver hadow Bar DL Putty Profile: 5/8, 7/8 and 1-1/8 with Light Bronze hadow Bar 5/8, 7/8 and 1-1/8 with ilver hadow Bar 1 Copper DL GBG (Grilles between the Glass): 5/8 Flat, 23/32 Contour, 1 Contour Full-urround: 7/8, 1-1/8, 1-3/8 HARDWARE Ball Bearing Hinges No Handle et, No Bore HINGE COLOR Brushed Chrome Polished Brass Oil-Rubbed Bronze JAMB Applied, 5/4 4-9/16 Handicapped ill Up to 6-11/16 No ill December 2011 JELD-WEN reserves the right to change specifications without notice. Page 25-4

5 Clad Epicr In-wing Patio Doors GENERAL INFORMATION DIMENIONAL DOOR Clad Epic in-swing doors may be specified as dimensional by adjusting the desired rough opening width or height in 1/4 increments from standard. Clad Epic in-swing doors are available in single and twin styles. The standard size range includes sizes specifically designed for replacement of older door models in existing structures, as well as a full range of true size products, for architectural consistency. ACTIVE ACTIVE OPERATION Clad Epic in-swing doors are available in single and twin operating styles. ingle panel doors may be specified as stationary (non-venting) or can operate left or right. Two-panel doors feature two operating panels, both of which are active. Configuration and handing is based on viewing the door from the interior. MULTIPLE AEMBLIE Clad Epic in-swing doors may be mulled below or beside other clad door and clad window products. Factory assembled mulls are limited in height (100 ), width (150 ), and a total area (75 square feet). December 2011 JELD-WEN reserves the right to change specifications without notice. Page 25-5

6 Clad Epicr In-wing Patio Doors ELEVATION NOTE ELEVATION DRAWING UTILIZE A LIMITED NUMBER OF PROJECTED LINE TO PRODUCE A RUDIMENTARY DRAWING INTENDED TO BE UED IN A MALL GRAPHICAL CALE. ELEVATION ARE VIEWED PERPENDICULAR FROM THE EXTERIOR OF THE TRUCTURE. IF MORE DIMENION ARE NEEDED, UE THE ECTION DRAWING FOR MORE COMPLETE DEPICTION. M.O. Brickmould M.O. Adams/Flat Casing Rough Opening Frame ize Daylight Opening 40 11/16 [ 1033 ] 43 3/4 [ 1111 ] 38 3/16 [ 970 ] 37 7/16 [ 951 ] 22 5/8 [ 575 ] Masonry Openings for Brickmould, Flat & Adams Casing. (ubtract 1/2 from Masonry Opening for Unit ize) 83 5/8 [ 2124 ] 85 5/32 [ 2163 ] 82 1/2 [ 2096 ] 81 3/4 [ 2076 ] 62 5/16 [ 1583 ] OUTIDE OF FRAME DAYLIGHT OPENING CIWTC INDICATE CLAD EPIC IN-WING DOOR CIFRTC INDICATE CLAD EPIC IN-WING FRENCH DOOR T INDICATE TRUE IZE C INDICATE COMMERCIAL DOOR CIWTC3068 BOOK CODE THE LAT TWO NUMBER INDICATE THE UNIT HEIGHT THE FIRT TWO NUMBER INDICATE THE UNIT WIDTH GENERAL WINGING DOOR NOTE 1. CLAD EPIC IN-WING DOOR (CIWTC) UNIT ARE AVAILABLE A OPERATING OR TATIONARY UNIT. 2. UNIT ELEVATION ARE HOWN WITHOUT EXTERIOR TRIM. UNIT IZE & MAONRY OPENING DIMENION WILL CHANGE WITH THE ADDITION OF EXTERIOR TRIM. EE THE UNIT IZING, ROUGH OPENING & MAONRY OPENING PAGE FOR EXTERIOR TRIM EFFECT. 3. OPERATING UNIT ARE AVAILABLE A LEFT OR RIGHT HAND OPERATION. 4. HANDICAP ILL AND 10 1/4 BOTTOM RAIL ARE TANDARD ON ALL UNIT. 5. INTERMEDIATE LOCK RAIL & RAIED PANEL ARE AVAILABLE FOR ALL UNIT. December 2011 JELD-WEN reserves the right to change specifications without notice. Page 25-6

7 Clad Epicr In-wing Patio Doors 1-PANEL UNIT M.O. BRICKMOULD M.O. ADAM/FLAT CAING ROUGH OPENING FRAME IZE DAYLIGHT OPENING 40 11/16 [1033] 43 3/4 [1111] 38 3/16 [970] 37 7/16 [951] 22 5/8 [575] 46 11/16 [1186] 49 3/4 [1264] 44 3/16 [1122] 43 7/16 [1103] 28 5/8 [727] 48 11/16 [1237] 51 3/4 [1314] 46 3/16 [1175] 45 7/16 [1154] 30 5/8 [779] 83 5/8 [2124] 85 5/32 [2163] 82 1/2 [2095] 81 3/4 [2076] 62 5/16 [1582] CIWTC3068 CIWTC3668 CIWTC /8 [2226] 89 5/32 [2265] 86 1/2 [2197] 85 3/4 [2178] 66 5/16 [1684] CIWTC3070 CIWTC3670 CIWTC /8 [2530] 101 5/32 [2569] 98 1/2 [2502] 97 3/4 [2483] 78 5/16 [1989] CIWTC3080 CIWTC3680 CIWTC /8 [2835] 113 5/32 [2874] 110 1/2 [2806] 109 3/4 [2788] 90 5/16 [2294] CIWTC3090 CIWTC3690 CIWTC3890 ELEVATION YMBOL LEGEND: M.O. = MAONRY OPENING VALUE IN [] ARE IN MILLIMETER CONVERION. Note: Elevations shown DO NOT have exterior trim. ubtract 1/2 (12.7) from M.O. (Masonry Opening) for Unit ize. For other Trim Options refer to the Unit izing, Rough Opening & Masonry Openings page. CALE: 1/8 = 1 December 2011 JELD-WEN reserves the right to change specifications without notice. Page 25-7

8 Clad Epicr In-wing Patio Doors 2-PANEL UNIT M.O. BRICKMOULD M.O. ADAM/FLAT CAING ROUGH OPENING FRAME IZE DAYLIGHT OPENING 77 [1956] 80 1/16 [2034] 74 1/2 [1892] 73 3/4 [1873] 22 5/8 [575] 89 [2261] 92 1/16 [2338] 86 1/2 [2197] 85 3/4 [2178] 28 5/8 [727] 83 5/8 [2124] 85 5/32 [2163] 82 1/2 [2095] 81 3/4 [2076] 62 5/16 [1582] CIFRTC6068 CIFRTC /8 [2226] 89 5/32 [2265] 86 1/2 [2197] 85 3/4 [2178] 66 5/16 [1684] CIFRTC6070 CIFRTC /8 [2530] 101 5/32 [2569] 98 1/2 [2502] 97 3/4 [2483] 78 5/16 [1989] CIFRTC6080 CIFRTC /8 [2835] 113 5/32 [2874] 110 1/2 [2806] 109 3/4 [2788] 90 5/16 [2294] CIFRTC6090 CIFRTC7090 ELEVATION YMBOL LEGEND: M.O. = MAONRY OPENING VALUE IN [] ARE IN MILLIMETER CONVERION. Note: Elevations shown DO NOT have exterior trim. ubtract 1/2 (12.7) from M.O. (Masonry Opening) for Unit ize. For other Trim Options refer to the Unit izing, Rough Opening & Masonry Openings page. CALE: 1/8 = 1 December 2011 JELD-WEN reserves the right to change specifications without notice. Page 25-8

9 Clad Epicr In-wing Patio Doors GLAZING OPTION INTERIOR GLAZED INULATED 3/4 [19] GLA 7 1/16 [179] 7 1/16 [179] 7 1/16 [179] 11/8 [29] 5/16 [8] 7/8 GRILLE BAR 1 1/8 GRILLE BAR 1 3/8 GRILLE BAR 5/8 [16] 11/8 [29] 5/8 DL BAR (PUTTY/BEAD) 7/8 DL BAR (PUTTY/BEAD) 11/8 DLBAR (PUTTY/BEAD) 5/8 [16] 11/8 [29] 5/8 DL BAR (PUTTY/PUTTY) 7/8 DL BAR (PUTTY/PUTTY) 11/8 DLBAR (PUTTY/PUTTY) 11/8 [29] 3/16 [5] 5/8 [16] 7/32 [6] 5/16 [8] 23/32 [18] 31/32 [25] 7/8 DL BAR (BEAD TOP) 11/8 DLBAR (BEAD TOP) 13/8 DLBAR (BEAD TOP) 5/8 23/32 FLAT GBG CONTOUR GBG 1 CONTOUR GBG CALE: NT November 2013 JELD-WEN reserves the right to change specifications without notice. Page 25-9

10 Clad Epicr In-wing Patio Doors GLAZING OPTION INTERIOR GLAZED INGLE 1/8 [3] GLA 7 1/16 [179] 7 1/16 [179] 7 1/16 [179] 11/8 [29] 7/8 GRILLE BAR 1 1/8 GRILLE BAR 1 3/8 GRILLE BAR 5/8 [16] 11/8 [29] 5/8 DL BAR (PUTTY/BEAD) 7/8 DL BAR (PUTTY/BEAD) 11/8 DLBAR (PUTTY/BEAD) 5/8 [16] 11/8 [29] 5/8 DL BAR (PUTTY/PUTTY) 7/8 DL BAR (PUTTY/PUTTY) 11/8 DLBAR (PUTTY/PUTTY) 11/8 [29] 7/8 DL BAR (BEAD TOP) 1 1/8 DL BAR 1 3/8 DL BAR (BEAD TOP) (BEAD TOP) CALE: NT November 2013 JELD-WEN reserves the right to change specifications without notice. Page 25-10

11 Clad Epicr In-wing Patio Doors GLAZING OPTION INTERIOR GLAZED IMPACT REITANT GLA 7 1/16 [179] 7 1/16 [179] 7 1/16 [179] 11/8 [29] 7/8 GRILLE BAR 1 1/8 GRILLE BAR 1 3/8 GRILLE BAR 5/8 [16] 11/8 [29] 5/8 DL BAR (PUTTY/BEAD) 7/8 DL BAR (PUTTY/BEAD) 11/8 DLBAR (PUTTY/BEAD) 5/8 [16] 11/8 [29] 5/8 DL BAR (PUTTY/PUTTY) 7/8 DL BAR (PUTTY/PUTTY) 11/8 DLBAR (PUTTY/PUTTY) 11/8 [29] 7/8 DL BAR (BEAD TOP) 11/8 DLBAR (BEAD TOP) 13/8 DLBAR (BEAD TOP) CALE: NT November 2013 JELD-WEN reserves the right to change specifications without notice. Page 25-11

12 Clad Epicr In-wing Patio Doors TRIM OPTION EXTERIOR TRIM 3 23/32 [95] 2 29/32 [74] 2 29/32 [74] MANCHETER CAING ADAM CAING 31/2 FLAT CAING BRICKMOULD NAILING FIN OPTION 4 9/16 [116] 4 11/16 [119] 9/16 FOLDING NAILING FIN 11/16 FOLDING NAILING FIN 1 3/16 [30] 1 1/16 [27] 4 9/16 [116] RIGID NAILING FIN 1 3/16 [30] NOTE: 11/16 FOLDING NAILING FLANGE WILL BE UED ON IDE JAMB AND WITH ALL TANDARD TRIM OPTION. ON UNIT WITH 11/16 FOLDING NAILING FLANGE AND NO EXTERIOR TRIM. THE 11/16 DRIPCAP I UED. CALE: 3 = 1 December 2011 JELD-WEN reserves the right to change specifications without notice. Page 25-12

13 Clad Epicr In-wing Patio Doors RAIL, PANEL & ILL OPTION 6 9/16 [167] 4 5/8 [117] OPTIONAL INTERMEDIATE LOCK RAIL 3/4 [19] 1/8 [3] 3/4 [19] 1/8 [3] 10 1/4 [260] 10 1/4 [260] 1/2 [13] 1 [25] 1/2 [13] 1 [25] 8 [203] TANDARD 10 1/4 BOTTOM RAIL HANDICAP ILL (4 9/16 JAMB) 10 [254] TANDARD 10 1/4 BOTTOM RAIL HANDICAP ILL (6 9/16 JAMB) CALE: 3 = 1 December 2011 JELD-WEN reserves the right to change specifications without notice. Page 25-13

14 Clad Epicr In-wing Patio Doors RAIL, PANEL & ILL OPTION TANDARD RAIED PANEL OPTION OPTIONAL INTERMEDIATE LC LOCK RAIL 3 9/16 [90] 6 3/32 [155] 1 [25] 1 [25] 1 3/16 [30] 10 1/16 RAIED PANEL WIDTH 36 TD LOCK RAIL HEIGHT 1/16 [2] 23 3/4 TD RAIED PANEL HEIGHT 1 [25] OPTIONAL 7/8 PUTTY TOP DL BAR 1 [25] OPTIONAL INTEMEDIATE TILE (RAIED PANEL) 3 9/16 [90] 35 7/8 (3-0T) DOOR PANEL WIDTH 1 3/16 [30] TANDARD 10 1/4 BOTTOM RAIL OPTIONAL 7/8 PUTTY TOP DL BAR 1/16 [2] 10 1/16 RAIED PANEL WIDTH 9 23/32 [247] 3/4 [19] 6 3/32 [155] BOTTOM OF PANEL VERTICAL ECTION HORIZONTAL ECTION CALE: 3 = 1 December 2011 JELD-WEN reserves the right to change specifications without notice. Page 25-14

15 Clad Epicr In-wing Patio Doors RAIL, PANEL & ILL OPTION OPTIONAL RAIED PANEL OPTION LC OPTIONAL INTERMEDIATE LOCK RAIL 3 9/16 [90] 6 3/32 [155] 1 [25] 1 [25] 1 3/16 [30] 10 11/16 RAIED PANEL HEIGHT 22 15/16 LOCK RAIL HEIGHT 1/16 [2] 1 3/16 [30] 23 11/16 RAIED PANEL WIDTH 35 7/8 (3-0T) OPTIONAL 7/8 PUTTY TOP DL BAR 1 [25] 1/16 [2] DOOR PANEL WIDTH OPTIONAL 7/8 PUTTY TOP DL BAR 1 [25] 9 23/32 [247] TANDARD 10 1/4 BOTTOM RAIL 6 3/32 [155] 3/4 [19] BOTTOM OF PANEL HORIZONTAL ECTION VERTICAL ECTION CALE: 3 = 1 December 2011 JELD-WEN reserves the right to change specifications without notice. Page 25-15

16 Clad Epicr In-wing Patio Doors TANDARD MULLION DETAIL 4 9/16 JAMB 1 5/16 [33] 2 11/16 [68] IDE JAMB 6 9/16 JAMB 1 5/16 [33] 2 11/16 [68] IDE JAMB CALE: 3 = 1 December 2011 JELD-WEN reserves the right to change specifications without notice. Page 25-16

17 Clad Epicr In-wing Patio Doors LITE CUT INFORMATION Clad Epic inswing doors are available with removable grilles in 5/8, 7/8, 1-1/8, and 1-3/8 widths with GBG (Grilles between the Glass), or with imulated Divided Lites. tandard lite cuts are rectangular. LITE CUT OPTION pecial lite cut patterns can include a wide variety of straight line and radius patterns. The illustrations shown here represent just a few of the possibilities. Rectangular, horizontal, vertical and Prairie lite patterns are available in all standard size clad Epic swinging doors. Uneven, diamond, radius and Gothic lite cuts are available, subject to approval. Approvals are based on the ability to fulfill the design requirements while maintaining the construction integrity of the finished product. RECTANGULAR HORIZONTAL VERTICAL PRAIRIE UNEVEN DIAMOND RADIU GOTHIC BAR ALIGNMENT Alignment of divided lite muntin bars from one product to the next is often required by fine architectural design. Wood grilles, GBG (Grilles between the Glass), and imulated Divided Lites may be specified with muntin bars aligned. December 2011 JELD-WEN reserves the right to change specifications without notice. Page 25-17

18 Clad Epicr In-wing Patio Doors UNIT IZING, ROUGH OPENING & MAONRY OPENING TANDARD OFFERING DRIP CAP & NAILING FLANGE HORIZONTAL FRAME = UNIT IZE TATIONARY OPERATOR GENERAL NOTE: UNIT WITH NO EXTERIOR TRIM OR DRIP CAP & NAILING FLANGE: FRAMEIZE=UNITIZE UNITIZEIALWAYTHE EXTREME IZE OF THE DOOR WITH OR WITHOUT TRIM (DRIP CAP & NAILING FLANGE ARE NOT ADDED TO ANY UNIT IZING) ROUGHOPENINGIALWAY3/4 OVER FRAME IZE OF THE DOOR MAONRY OPENING I ALWAY 1/2 OVER THE UNIT IZE OF THE DOOR ROUGH OPENING: DRIP CAP & NAILING FLANGE OPERATOR TATIONARY VERTICAL FRAME = UNIT IZE 3/8 [10] HORIZONTAL ROUGH OPENING 3/8 [10] 3 23/32 [94] 2 29/32 [74] 3/4 [19] UNIT IZE FRAME TO EXTERIOR TRIM (UNIT) IZE HORIZONTAL UNIT IZE HERITAGE CAING FRAME + 7 7/16 [191] HORIZONTAL UNIT IZE 31/2 FLATCAING & ADAM CAING FRAME /16 [148] HORIZONTAL UNIT IZE BRICKMOULD FRAME+23/4 [70] VERTICAL UNIT IZE BRICKMOULD FRAME+ VERTICAL UNIT IZE 31/2 FLATCAING & ADAM CAING FRAME /32 [74] VERTICAL UNIT IZE HERITAGE CAING FRAME /32 [94] VERTICAL ROUGH OPENING 2 29/32 [74] 2 29/32 [74] 3 23/32 [94] 3 23/32 [94] December 2011 JELD-WEN reserves the right to change specifications without notice. Page 25-18

19 Clad Epicr In-wing Patio Doors 1-PANEL UNIT 11/8 53/4 4 9/16 37/8 11/16 3/4 3/4 61/8 1/2 Unit ize 1/8 3/4 Daylight Opening Glass ize Panel ize Frame ize Rough Opening 1/2 93/4 13/4 8 VERTICAL ECTION CALE: 3 = 1 December 2011 JELD-WEN reserves the right to change specifications without notice. Page 25-19

20 Clad Epicr In-wing Patio Doors 1-PANEL UNIT 3/8 Rough Opening Frame ize 3/8 Panel ize 6 1/16 Glass ize 61/8 13/16 Daylight Opening 13/16 1/2 1/2 1/8 3/4 53/4 37/8 4 9/16 37/8 4 9/16 53/4 11/16 11/16 11/8 11/8 Unit ize HORIZONTAL ECTION CALE: 3 = 1 December 2011 JELD-WEN reserves the right to change specifications without notice. Page 25-20

21 Clad Epicr In-wing Patio Doors 2-PANEL FRENCH UNIT 3/8 3/4 61/8 Rough Opening Frame ize Panel ize Glass ize Daylight Opening 1/2 1/2 61/8 1/8 3/4 37/8 4 9/16 53/4 11/16 11/8 Unit ize HORIZONTAL ECTION CALE: 3 = 1 December 2011 JELD-WEN reserves the right to change specifications without notice. Page 25-21