Primed Double-Hung Windows Custom Wood

Transcription

1 ABLE OF CONENS Specifications QuickSpecGuide Elevations:1/4 Scale Double-Hung Units CottageUnits ReverseCottageUnits PictureUnits ransomunits SectoropSingle-HungUnits GlazingOptions rim&silloptions JambOptions Mullion Details & Specialty rim Grille & SDL Patterns ClearOpeningandDaylightSpecifications Unit Sizing, Rough Openings & Masonry Openings SectionDetails:6 Scale Bays&BowsOpeningSpecifications SectionDetails:Bays&Bows-3 Scale October 2006 JELD-WEN reserves the right to change specifications without notice. Page 6-1

2 PRODUC SPECIFICAIONS EXERIOR FINISH he standard exterior is factory-applied latex primer with an option for unfinished (stain grade) natural pine exterior available. AURALAS R WOOD AuraLast R wood is fundamentally different from wood treated in traditional millwork preservation processes in that it uses a proprietary vacuum/pressure process to provide protection throughout the wood parts used to make windows and doors. AuraLast R wood is distinguished from wood using traditional preservation methods by its unique ability to achieve greater penetration of the active ingredients into the wood parts, with a minimum treatment penetration of 92%. INERIOR FINISH Interior surfaces are unfinished clear pine ready for on-site finishing. Optional prefinished pine interiors include four acrylic colors (Moderate White, Extra White, Natural Choice, Pure White), four stains (Wheat, Cherry, Fruitwood, Cordovan) and a clear lacquer topcoat. Primed interior is also available. FRAME Frame is assembled from select kiln-dried pine AuraLast R wood on all exterior parts, factory primed. Standard jamb width is 4-9/16. SASH 1-7/16 thick select kiln-dried pine AuraLast R wood. Exterior surface is factory primed. Corner joints are mortised-and-tenoned, glued and nailed from the interior, with the glass mounted into the sash using silicone glazing compound, then secured with interior applied profiled wood stops. he upper sash of the Sector op Single-Hung is fixed, with the lower sash operational. GLAZING Insulating glass is constructed from two panes of glass, utilizing a continuous roll formed stainless steel spacer with dual seal sealant. he glass is mounted into the sash using a silicone-glazing compound and secured with interior applied profiled wood stops. All insulating glass units comply with the performance requirements of IGCC in accordance with either ASM E774 or E2190. GLAZING OPIONS Insulating glass available in Low-E with Argon, Low-E, Low-E 366, Clear, Neat Glass, Seedy Reamy, tinted, reflective, or obscure, tempered or other specialty glass as specified. Preserve film is a thick polyethylene film with a low tack acrylic adhesive applied to the glass for protection during shipping and installation. Installations at 4,000 foot elevations and higher require a capillary tube to equalize environmental stress (otherwise known as High Altitude glazing). High Altitude glazing does not allow the use of Argon as listed under glazing options. WEAHER-SRIPPING Engineered system combines a concealed non-compression jamb liner forming a compression seal with dual durometer bulb seal weather-stripping against the sash stiles, and dual durometer bulb seal compressed between the top and bottom rails of the sash and frame, bulb seal between the top rail and the head filler stop, as well as a bulb seal compressed between the sash meeting rails. HARDWARE Concealed block and tackle balance system is utilized to facilitate tilting and removal of the sash for cleaning. he interior sash locks are a cam action design with the lock case finish available in the standard finish options of White, Chestnut Bronze, and Desert Sand, with optional finishes in plated Polished Brass, Antique Brass, Polished Chrome, Brushed Chrome and Oil Rubbed Bronze. Recessed sash retainers restrain the upper and lower sash and provide a tracking system for the jamb liner. Interior sash lifts are optional, are sold separately, and are available in matching finishes. EXERIOR INSEC SCREENS Charcoal fiberglass screen cloth (18x16 mesh) set in painted roll formed aluminum frame fitted to the outside of the window with all necessary hardware, in Brilliant White, Chestnut Bronze, Desert Sand, French Vanilla, Hartford Green, Mesa Red, Black Licorice, Heirloom White, Hunter Green, Redwood, Sage Brown, and Smoke finishes. Interior Phantom screens are available in Pine. Insect screens are intended to allow air and light in and to keep insects out. hey are not intended to keep anyone or anything from falling through an open window. For safety screens or other security devices contact your local building supply retailer. GRILLES SDL (Simulated Divided Lites) - extruded pre-primed aluminum muntins permanently applied to the exterior of the insulating glass unit (not available on textured glass) in 7/8, 1-1/8, or 1-3/8 widths. Profiles are bead stop in all widths, and a putty profile in the 7/8 and 1-1/8 widths only. 1 Copper SDL is also available. SDL is standard with a light bronze internal shadow bar to give a true divided lite appearance. As an option, SDL may be ordered with a silver shadow bar or without a shadow bar. Clear wood interior muntin bars match the exterior muntin width and are permanently bonded to the interior of the glass. Also available is a 2-5/16 SDL bar, which simulates a double-hung checkrail. PDL (Precise Divided Lites) - Wood or extruded aluminum muntins permanently applied to the exterior of the insulating unit (not available on textured glass) in 3/4 and 1-1/2 widths. Clear wood interior muntin bars match the exterior muntin width and are permanently bonded to the interior of the glass. Full Surround Removable Wood Grilles - Rectangular, unfinishedinterior clear pine wood grilles in 7/8, 1-1/8, and 1-3/8 are available in patterns selected by the owner. GBG (Grilles between the Glass) - 5/8 (15.9mm) flat and 23/32 or 1 contour mounted between the glass panes suspended within the air cavity. or without a shadow bar. EXERIOR RIM Brickmould standard with optional 3-1/2, 4-1/2, 5-1/2 flat trim, 3-1/2 Adams and 1 x 4 Backband trim. Optional mull covers to accommodate 1 (spread only), 2, 3-1/2 and 6 spread and stud pocket mull. EXENSION JAMBS Extensions are applied to the interior on all four sides of the frame in wall depths up to 9-1/8 for 4/4, factory applied. Continued on next page May 2007 JELD-WEN reserves the right to change specifications without notice. Page 6-2

3 PRODUC SPECIFICAIONS INSALLAION Installation per JELD-WEN Installation Method for Wood Windows. See for instructions. PERFORMANCE NFRC Certified - (rated and labeled in accordance with NFRC 100 and 200 procedures) ANSI/AAMA/NWWDA/101/I.S.2-97 AMMA/WDMA/CSA 101/I.S.2/A WDMA Hallmark Certified See for architectural and performance information. May 2007 JELD-WEN reserves the right to change specifications without notice. Page 6-3

4 QUICK SPEC GUIDE SPECIFICAION SANDARD FEAURES OPIONAL FEAURES Some options may require additional lead times. Consult your JELD-WEN Sales Representative. EXERIOR FINISH S Primed S Natural EXERIOR RIM S Brickmould & Sillnose S Adams Casing S 3-1/2 Flat Casing INERIOR WOOD S Western Pine INERIOR FINISH S Natural S Priming Available Sash Only: S Bright Copper S Hand Rubbed Patina S Speckled Patina Copper Copper S S 4-1/2 Flat Casing 5-1/2 Flat Casing SIZE S Width: 21-3/8, 25-3/8, 29-3/8, 31-3/8, 33-3/8, 35-3/8, 37-3/8, 41-3/8, 45-3/8, 49-3/8 S Height: 32, 36, 40, 44, 48, 52, 56, 60, 64, 68, 72, 76, 80, 88, 92, 96 GLAZING S Low-E Insulating Glass (with Argon) S Preserve Protective Film GRILLES Pre-finished Interior Options are: S Paint - Pure White, Extra White, Natural Choice, Moderate White S Stain - Wheat, Fruitwood, Cherry, Cordovan S Clear Lacquer S Any Width: 13-3/8 to 49-3/8 (certain restrictions apply) S Any Height: 32 to 96 (certain restrictions apply) S Clear S Safety Laminate in S Low-E 366 Clear, Bronze or Gray S Obscure S Neat Glass S ints: Bronze, Gray, S Seedy Reamy Solex S Rain S Reflective: Bronze and Gray S Narrow Reed S Glue Chip S empered S High Altitude (Breather ube, no Argon) SDL Bead Profile: S 7/8, 1-1/8, 1-3/8, 2-5/16 with Light Bronze Shadow Bar S 7/8, 1-1/8, 1-3/8, 2-5/16 with Silver Shadow Bar S 7/8, 1-1/8, 1-3/8, 2-5/16 with No Shadow Bar SDL Putty Profile: S 7/8 and 1-1/8 with Light Bronze Shadow Bar S 7/8 and 1-1/8 with Silver Shadow Bar S 7/8 and 1-1/8 with No Shadow Bar S 1 Copper SDL PDL: S 3/4 or 1-1/2 Precise Divided Lite GBG (Grilles between the Glass): S 5/8 Flat, 23/32 Contour, 1 Contour Full Surround: S 7/8, 1-1/8, 1-3/8 Wood Grilles Continued on next page May 2007 JELD-WEN reserves the right to change specifications without notice. Page 6-4

5 QUICK SPEC GUIDE SPECIFICAION SANDARD FEAURES HARDWARE S Concealed Block & ackle S CamActionSashLocks S Recessed Sash Retainers op & Bottom HARDWARE COLOR S White S Chestnut Bronze S Desert Sand JAMB S Applied, 4/4 S 4-9/16 S S S S S OPIONAL FEAURES Some options may require additional lead times. Consult your JELD-WEN Sales Representative. Sash Lifts Polished Brass Antique Brass Polished Chrome Brushed Chrome S Up to 9-1/8 4/4 INSEC SCREENS S Fiberglass S Phantom Screen available in Pine SCREEN FRAME COLOR S Brilliant White S Chestnut Bronze S Desert Sand S French Vanilla S Mesa Red S Hartford Green S S S S S S Black Licorice Heirloom White Hunter Green Redwood Sage Brown Smoke S S S S S S S S S S S S S S S Black Emerald Bone White Bronze Buckskin Cambridge White Capri Blue Cascade Champagne Clover Mist Dark Buckskin Dark Ivy Deep Summer Garnet Haverstraw Hudson Blue S S S Oil Rubbed Bronze Brushed Nickel Western Pewter S Ivory S Ivy S Liberty Blue S Mocha Cream S Mosiac Green S Pueblo an S Rosewood S Scarlet Haze S Sea Foam S eal S Wedgewood S White S Clear Satin Anodized S Custom Color Matching May 2007 JELD-WEN reserves the right to change specifications without notice. Page 6-5

6 GENERAL INFORMAION DOUBLE-HUNG DIMENSIONAL WINDOWS Wood double-hung windows may be specified as dimensional by adjusting the desired rough opening width or height in 1/4 increments from standard. Wood double-hung windows feature fully operating upper and lower sash. Counterbalancing is achieved with block and tackle spring extension systems hidden in weatherable PVC jambliners. Operating units are supplied with cam-type sash locks installed. Die-cast lower sash lifts supplied for field installation are an option. Recessed sash retainers provide simple sash installation and removal. here are several hardware finish options. Refer to the Specifications for available finish options. MULIPLE ASSEMBLIES Wood double-hung windows may be mulled beside other wood double-hungs or wood picture windows, or below wood transom windows, to fulfill a wide variety of needs. Factory assembled mulls are limited in height (100 ), width (114 ), and a total area (75 square feet). October 2006 JELD-WEN reserves the right to change specifications without notice. Page 6-6

7 HANDING & OPERAION DOUBLE-HUNG DOUBLE-HUNG OPERAION: When the sash are locked at the check rails the sash are closed and sealed in the sash opening of the frame. When the sash are unlocked the lower sash travels vertically to any position desired. he upper sash can also be positioned as desired. SASH ILING FOR WASHING he Custom Double-Hung window will allow the sash to be tilted or removed for easy cleaning. October 2006 JELD-WEN reserves the right to change specifications without notice. Page 6-7

8 ELEVAION NOES DOUBLE-HUNG ELEVAION DRAWINGS UILIZE A LIMIED NUMBER OF PROJECED LINES O PRODUCE A RUDIMENARY DRAWING INENDED O BE USED IN A SMALL GRAPHICAL SCALE. ELEVAIONS ARE VIEWED PERPENDICULAR FROM HE EXERIOR OF HE SRUCURE. IF MORE DIMENSIONS ARE NEEDED, USE HE SECION DRAWINGS FOR MORE COMPLEE DEPICIONS. M.O. Brickmould M.O. Adams/Flat Casing Rough Opening Frame Size Daylight Opening 24 5/8 [ 625 ] 27 11/16 [ 703 ] 22 1/8 [ 562 ] 21 3/8 [ 543 ] 15 7/16 [ 392 ] Masonry Openings for Brickmould, Flat & Adams Casing. Vertical measurements include sillnose. (Subtract 1/2 from Masonry Opening for Unit Size) DP RAING SEE SYMBOL LEGEND BELOW 34 1/2 [ 876 ] 36 [ 914 ] 32 3/4 [ 832 ] 32 [ 813 ] 11 7/16 [ 291 ] DAYLIGH OPENING CWD INDICAES CUSOM WOOD DOUBLE-HUNG HE FIRS WO NUMBERS INDICAE HE UNI WIDH CWD2132 OPIONAL DP RAING SEE SYMBOL LEGEND BELOW OUSIDE OF EXERIOR RIM BOOK CODE HE LAS WO NUMBERS INDICAE HE UNI HEIGH COAGE & REVERSE COAGE BOOK CODES CWD2148C24 UNI WIDH UNI HEIGH C = COAGE R = REVERSE COAGE LOWER SASH VERICAL GLASS GENERAL WOOD DOUBLE-HUNG NOES 1. ALL UNIS SHOWN ARE AVAILABLE AS OPERAORS ONLY. 2. UNI ELEVAIONS ARE SHOWN WIH BRICKMOULD & SILLNOSE. 3. ALL OPERAING SASH ARE INSALLED WIH VINYL JAMB LINERS AND OPERAED WIH AN INERNAL BLOCK AND ACKLE SPRING SYSEM. 4. DIMENSIONAL VALUES IN BRACKES ARE MILLIMEER CONVERSIONS. ELEVAION SYMBOL LEGEND: BASICUNIISNOAVAILABLEWIHRIPLEGLAZE,IMPAC RESISAN, OR SAFEY LAMINAED GLASS. ##* NUMBER INDICAES DESIGN PRESSURE (DP) RAING WIH SANDARD GLAZING. ##** REQUIRES APPLICAION OF SOOL FOR WAER RESIS- ANCE. HIS APPLICAION REDUCES CLEAR OPENING VERI- CALLY. SOOL ADDS 3/8 [10] MINIMUM O HEIGH OF INERIOR SILL SOP. October 2006 JELD-WEN reserves the right to change specifications without notice. Page 6-8

9 1-WIDE UNIS M.O. BRICKMOULD M.O. ADAMS/FLA CASING ROUGH OPENING FRAME SIZE DAYLIGH OPENING 24 5/8 (625) 27 11/16 (703) 22 1/8 (562) 21 3/8 (543) 15 7/16 (392) 28 5/8 (727) 31 11/16 (805) 26 1/8 (664) 25 3/8 (645) 19 7/16 (494) 32 5/8 (829) 35 11/16 (906) 30 1/8 (765) 29 3/8 (746) 23 7/16 (595) 34 5/8 (879) 37 11/16 (957) 32 1/8 (816) 31 3/8 (797) 25 7/16 (646) 36 5/8 (930) 39 11/16 (1008) 34 1/8 (867) 33 3/8 (848) 27 7/16 (697) 38 5/8 (981) 41 11/16 (1059) 36 1/8 (918) 35 3/8 (899) 29 7/16 (748) 40 5/8 (1032) 43 11/16 (1110) 38 1/8 (968) 37 3/8 (949) 31 7/16 (799) 34 13/32 (874) 35 15/16 (913) 32 3/4 (832) 32 (813) 11 7/16 (291) CWD2132 CWD2532 CWD2932 CWD3132 CWD3332 CWD3532 CWD /32 (976) 39 15/16 (1014) 36 3/4 (933) 36 (914) 13 7/16 (341) CWD2136 CWD2536 CWD2936 CWD3136 CWD3336 CWD3536 CWD /32 (1077) 43 15/16 (1116) 40 3/4 (1035) 40 (1016) 15 7/16 (392) CWD2140 CWD2540 CWD2940 CWD3140 CWD3340 CWD3540 CWD /32 (1179) 47 15/16 (1218) 44 3/4 (1137) 44 (1118) 17 7/16 (443) CWD2144 CWD2544 CWD2944 CWD3144 CWD3344 CWD3544 CWD /32 (1280) 51 15/16 (1319) 48 3/4 (1238) 48 (1219) 19 7/16 (494) CWD2148 CWD2548 CWD2948 CWD3148 CWD3348 CWD3548 CWD /32 (1382) 55 15/16 (1421) 52 3/4 (1340) 52 (1321) 21 7/16 (545) CWD2152 CWD2552 CWD2952 CWD3152 CWD3352 CWD3552 CWD /32 (1484) 59 15/16 (1522) 56 3/4 (1441) 56 (1422) 23 7/16 (595) CWD2156 CWD2556 CWD2956 CWD3156 CWD3356 CWD3556 CWD3756 ELEVAION SYMBOL LEGEND: M.O. = MASONRY OPENING VALUES IN () ARE IN MILLIMEER CONVERSIONS BASIC UNI IS NO AVAILABLE WIH RIPLE GLAZE, IMPAC RESISAN, OR SAFEY LAMINAED GLASS. ##* NUMBER INDICAES DESIGN PRESSURE (DP) RAING WIH SANDARD GLAZING. ##** REQUIRES APPLICAION OF SOOL FOR WAER RESISANCE. HIS APPLICAION REDUCES CLEAR OPENING VERICALLY. SOOL ADDS 3/8 [10] MINIMUM O HEIGH OF INERIOR SILL SOP. Note: Elevations shown DO NO have exterior trim. Subtract 1/2 (12.7) from M.O. (Masonry Opening) for Unit Sizes. Masonry Openings above include Sill Nose,see rim Options page for Sill Nose specifications. For other rim Options refer to the Unit Sizing, Rough Opening & Masonry Openings page. SCALE: 1/4 = 1 October 2006 JELD-WEN reserves the right to change specifications without notice. Page 6-9

10 1-WIDE UNIS M.O. BRICKMOULD M.O. ADAMS/FLA CASING ROUGH OPENING FRAME SIZE DAYLIGH OPENING 24 5/8 (625) 28 5/8 (727) 32 5/8 (829) 34 5/8 (879) 36 5/8 (930) 38 5/8 (981) 40 5/8 (1032) 27 11/16 (703) 31 11/16 (805) 35 11/16 (906) 37 11/16 (957) 39 11/16 (1008) 41 11/16 (1059) 43 11/16 (1110) 22 1/8 (562) 26 1/8 (664) 30 1/8 (765) 32 1/8 (816) 34 1/8 (867) 36 1/8 (918) 38 1/8 (968) 21 3/8 (543) 25 3/8 (645) 29 3/8 (746) 31 3/8 (797) 33 3/8 (848) 35 3/8 (899) 37 3/8 (949) 15 7/16 (392) 19 7/16 (494) 23 7/16 (595) 25 7/16 (646) 27 7/16 (697) 29 7/16 (748) 31 7/16 (799) E CWD2160 CWD2560 CWD2960 CWD3160 CWD3360 CWD3560 CWD3760 E E CWD2164 CWD2564 CWD2964 CWD3164 CWD3364 CWD3564 CWD3764 E E E CWD2168 CWD2568 CWD2968 CWD3168 CWD3368 CWD3568 CWD3768 E E E E CWD2172 CWD2572 CWD2972 CWD3172 CWD3372 CWD3572 CWD /32 (1994) 79 15/16 (2030) 76 3/4 (1949) 76 (1930) 33 7/16 (849) 74 13/32 (1890) 75 15/16 (1929) 72 3/4 (1848) 72 (18229) 31 7/16 (799) 70 13/32 (1788) 71 15/16 (1827) 68 3/4 (1746) 68 (1727) 29 7/16 (748) 66 13/32 (1687) 67 15/16 (1726) 64 3/4 (1645) 64 (1626) 27 7/16 (697) 62 13/32 (1585) 63 15/16 (1624) 60 3/4 (1543) 60 (1524) 25 7/16 (646) E E E E E CWD2176 CWD2576 CWD2976 CWD3176 CWD3376 CWD3576 CWD3776 ELEVAION SYMBOL LEGEND: M.O. = MASONRY OPENING VALUES IN () ARE IN MILLIMEER CONVERSIONS E BASIC UNI CLEAR OPENING EXCEEDS 20 IN WIDH, 24 IN HEIGH & A MINIMUM OF 5.7 SQ. F. BASIC UNI IS NO AVAILABLE WIH RIPLE GLAZE, IMPAC RESISAN, OR SAFEY LAMINAEDGLASS. Note: Elevations shown DO NO have exterior trim. Subtract 1/2 (12.7) from M.O. (Masonry Opening) for Unit Sizes. Masonry Openings above include Sill Nose, see rim Options page for Sill Nose specifications. For other rim Options refer to the Unit Sizing, Rough Opening & Masonry Openings page. ##* NUMBER INDICAES DESIGN PRESSURE (DP) RAING WIH SANDARD GLAZING. ##** REQUIRES APPLICAIONOFSOOLFOR WAER RESISANCE. HIS APPLICAIONREDUCES CLEAR OPENINGVERICALLY. SOOLADDS 3/8 [10] MINIMUM OHEIGH OFINERIOR SILLSOP. SCALE: 1/4 = 1 October 2006 JELD-WEN reserves the right to change specifications without notice. Page 6-10

11 1-WIDE UNIS M.O. BRICKMOULD M.O. ADAMS/FLA CASING ROUGH OPENING FRAME SIZE DAYLIGH OPENING 24 5/8 (625) 28 5/8 (727) 32 5/8 (829) 34 5/8 (879) 36 5/8 (930) 38 5/8 (981) 40 5/8 (1032) 27 11/16 (703) 31 11/16 (805) 35 11/16 (906) 37 11/16 (957) 39 11/16 (1008) 41 11/16 (1059) 43 11/16 (1110) 22 1/8 (562) 26 1/8 (664) 30 1/8 (765) 32 1/8 (816) 34 1/8 (867) 36 1/8 (918) 38 1/8 (968) 21 3/8 (543) 25 3/8 (645) 29 3/8 (746) 31 3/8 (797) 33 3/8 (848) 35 3/8 (899) 37 3/8 (949) 15 7/16 (392) 19 7/16 (494) 23 7/16 (595) 25 7/16 (646) 27 7/16 (697) 29 7/16 (748) 31 7/16 (799) 82 13/32 (2093) 83 15/16 (2132) 80 3/4 (2051) 80 (2032) 35 7/16 (900) E E E E E CWD2180 CWD2580 CWD2980 CWD3180 CWD3380 CWD3580 CWD /32 (2296) 91 15/16 (2335) 88 3/4 (2254) 88 (2235) 39 7/16 (1002) E E E E E E CWD2188 CWD2588 CWD2988 CWD3188 CWD3388 CWD3588 CWD /32 (2398) 95 15/16 (2437) 92 3/4 (2356) 92 (2337) 41 7/16 (1053) E E E E E E CWD2192 CWD2592 CWD2992 CWD3192 CWD3392 CWD3592 CWD /32 (2500) 99 15/16 (2538) 96 3/4 (2457) 96 (2438) 43 7/16 (1103) E E E E E E CWD2196 CWD2596 CWD2996 CWD3196 CWD3396 CWD3596 CWD3796 ELEVAION SYMBOL LEGEND: M.O. = MASONRY OPENING VALUES IN () ARE IN MILLIMEER CONVERSIONS E BASIC UNI CLEAR OPENING EXCEEDS 20 IN WIDH, 24 IN HEIGH & A MINIMUM OF 5.7 SQ. F. BASIC UNI IS NO AVAILABLE WIH RIPLE GLAZE, IMPAC RESISAN, OR SAFEY LAMINAEDGLASS. Note: Elevations shown DO NO have exterior trim. Subtract 1/2 (12.7) from M.O. (Masonry Opening) for Unit Sizes. Masonry Openings above include Sill Nose, see rim Options page for Sill Nose specifications. For other rim Options refer to the Unit Sizing, Rough Opening & Masonry Openings page. ##* NUMBER INDICAES DESIGN PRESSURE (DP) RAING WIH SANDARD GLAZING. ##** REQUIRES APPLICAIONOFSOOLFOR WAER RESISANCE. HIS APPLICAIONREDUCES CLEAR OPENINGVERICALLY. SOOLADDS 3/8 [10] MINIMUM OHEIGH OFINERIOR SILLSOP. SCALE: 1/4 = 1 October 2006 JELD-WEN reserves the right to change specifications without notice. Page 6-11

12 1-WIDE UNIS M.O. BRICKMOULD M.O. ADAMS/FLA CASING ROUGH OPENING FRAME SIZE DAYLIGH OPENING 44 5/8 (1133) 47 11/16 (1211) 42 1/8 (1070) 41 3/8 (1051) 35 7/16 (900) 48 5/8 (1235) 51 11/16 (1313) 46 1/8 (1172) 45 3/8 (1153) 39 7/16 (1002) 52 5/8 (1337) 55 11/16 (1414) 50 1/8 (1273) 49 3/8 (1254) 43 7/16 (1103) 34 13/32 (874) 35 15/16 (913) 32 3/4 (832) 32 (813) 11 7/16 (291) CWD4132 CWD /32 (976) 39 15/16 (1014) 36 3/4 (933) 36 (914) 13 7/16 (341) CWD4136 CWD /32 (1077) 43 15/16 (1116) 40 3/4 (1035) 40 (1016) 15 7/16 (392) CWD4140 CWD4540 CWD /32 (1179) 47 15/16 (1218) 44 3/4 (1137) 44 (1118) 17 7/16 (443) CWD4144 CWD4544 CWD /32 (1280) 51 15/16 (1319) 48 3/4 (1238) 48 (1219) 19 7/16 (494) CWD4148 CWD4548 CWD4948 CWD4152 CWD4552 CWD /32 (1484) 59 15/16 (1522) 56 3/4 (1441) 56 (1422) 23 7/16 (595) 54 13/32 (1382) 55 15/16 (1421) 52 3/4 (1340) 52 (1321) 21 7/16 (545) CWD4156 CWD4556 CWD4956 ELEVAION SYMBOL LEGEND: M.O. = MASONRY OPENING VALUES IN () ARE IN MILLIMEER CONVERSIONS BASIC UNI IS NO AVAILABLE WIH RIPLE GLAZE, IMPAC RESISAN, OR SAFEY LAMINAEDGLASS. ##* NUMBER INDICAES DESIGN PRESSURE (DP) RAING WIH SANDARD GLAZING. ##** REQUIRES APPLICAIONOFSOOLFOR WAER RESISANCE. HIS APPLICAIONREDUCES CLEAR OPENINGVERICALLY. SOOLADDS 3/8 [10] MINIMUM OHEIGH OFINERIOR SILLSOP. Note: Elevations shown DO NO have exterior trim. Subtract 1/2 (12.7) from M.O. (Masonry Opening) for Unit Sizes. Masonry Openings above include Sill Nose, see rim Options page for Sill Nose specifications. For other rim Options refer to the Unit Sizing, Rough Opening & Masonry Openings page. SCALE: 1/4 = 1 October 2006 JELD-WEN reserves the right to change specifications without notice. Page 6-12

13 1-WIDE UNIS M.O. BRICKMOULD M.O. ADAMS/FLA CASING ROUGH OPENING FRAME SIZE DAYLIGH OPENING 44 5/8 (1133) 48 5/8 (1235) 52 5/8 (1337) 47 11/16 (1211) 51 11/16 (1313) 55 11/16 (1414) 42 1/8 (1070) 46 1/8 (1172) 50 1/8 (1273) 41 3/8 (1051) 45 3/8 (1153) 49 3/8 (1254) 35 7/16 (900) 39 7/16 (1002) 43 7/16 (1103) E E E CWD4160 CWD4560 CWD4960 E E E CWD4164 CWD4564 CWD4964 E E E CWD4168 CWD4568 CWD4968 E E E CWD4172 CWD4572 CWD /32 (1994) 79 15/16 (2030) 76 3/4 (1949) 76 (1930) 33 7/16 (849) 74 13/32 (1890) 75 15/16 (1929) 72 3/4 (1848) 72 (18229) 31 7/16 (799) 70 13/32 (1788) 71 15/16 (1827) 68 3/4 (1746) 68 (1727) 29 7/16 (748) 66 13/32 (1687) 67 15/16 (1726) 64 3/4 (1645) 64 (1626) 27 7/16 (697) 62 13/32 (1585) 63 15/16 (1624) 60 3/4 (1543) 60 (1524) 25 7/16 (646) E E E ELEVAION SYMBOL LEGEND: M.O. = MASONRY OPENING VALUES IN () ARE IN MILLIMEER CONVERSIONS CWD4176 CWD4576 CWD4976 E BASIC UNI CLEAR OPENING EXCEEDS 20 IN WIDH, 24 IN HEIGH & A MINIMUM OF 5.7 SQ. F. BASIC UNI IS NO AVAILABLE WIH RIPLE GLAZE, IMPAC RESISAN, OR SAFEY LAMINAEDGLASS. ##* NUMBER INDICAES DESIGN PRESSURE (DP) RAING WIH SANDARD GLAZING. ##** REQUIRES APPLICAIONOFSOOLFOR WAER RESISANCE. HIS APPLICAIONREDUCES CLEAR OPENINGVERICALLY. SOOLADDS 3/8 [10] MINIMUM OHEIGH OFINERIOR SILLSOP. Note: Elevations shown DO NO have exterior trim. Subtract 1/2 (12.7) from M.O. (Masonry Opening) for Unit Sizes. Masonry Openings above include Sill Nose, see rim Options page for Sill Nose specifications. For other rim Options refer to the Unit Sizing, Rough Opening & Masonry Openings page. SCALE: 1/4 = 1 October 2006 JELD-WEN reserves the right to change specifications without notice. Page 6-13

14 1-WIDE UNIS M.O. BRICKMOULD M.O. ADAMS/FLA CASING ROUGH OPENING FRAME SIZE DAYLIGH OPENING 44 5/8 (1133) 48 5/8 (1235) 47 11/16 (1211) 51 11/16 (1313) 42 1/8 (1070) 46 1/8 (1172) 41 3/8 (1051) 45 3/8 (1153) 35 7/16 (900) 39 7/16 (1002) 82 13/32 (2093) 83 15/16 (2132) 80 3/4 (2051) 80 (2032) 35 7/16 (900) E E CWD4180 CWD /32 (2296) 91 15/16 (2335) 88 3/4 (2254) 88 (2235) 39 7/16 (1002) E CWD4188 ELEVAION SYMBOL LEGEND: M.O. = MASONRY OPENING VALUES IN () ARE IN MILLIMEER CONVERSIONS E BASIC UNI CLEAR OPENING EXCEEDS 20 IN WIDH, 24 IN HEIGH & A MINIMUM OF 5.7 SQ. F. BASIC UNI IS NO AVAILABLE WIH RIPLE GLAZE, IMPAC RESISAN, OR SAFEY LAMINAEDGLASS. ##* NUMBER INDICAES DESIGN PRESSURE (DP) RAING WIH SANDARD GLAZING. ##** REQUIRES APPLICAIONOFSOOLFOR WAER RESISANCE. HIS APPLICAIONREDUCES CLEAR OPENINGVERICALLY. SOOLADDS 3/8 [10] MINIMUM OHEIGH OFINERIOR SILLSOP. Note: Elevations shown DO NO have exterior trim. Subtract 1/2 (12.7) from M.O. (Masonry Opening) for Unit Sizes. Masonry Openings above include Sill Nose, see rim Options page for Sill Nose specifications. For other rim Options refer to the Unit Sizing, Rough Opening & Masonry Openings page. SCALE: 1/4 = 1 October 2006 JELD-WEN reserves the right to change specifications without notice. Page 6-14

15 2-WIDE UNIS M.O. BRICKMOULD M.O. ADAMS/FLA CASING ROUGH OPENING FRAME SIZE DAYLIGH OPENING 46 (1168) 49 1/16 (1246) 43 1/2 (1105) 42 3/4 (1086) 15 7/16 [2](392)[2] 54 (1372) 57 1/16 (1449) 51 1/2 (1308) 50 3/4 (1289) 19 7/16 [2](494)[2] 62 (1575) 64 1/16 (1627) 59 1/2 (1511) 58 3/4 (1492) 23 7/16 [2](595)[2] 66 (1676) 68 1/16 (1729) 63 1/2 (1613) 62 3/4 (1594) 25 7/16 [2](646)[2] 70 (1778) 72 1/16 (1830) 67 1/2 (1715) 66 3/4 (1695) 27 7/16 [2](697)[2] 74 (1880) 76 1/16 (1932) 71 1/2 (1816) 70 3/4 (1797) 29 7/16 [2](748)[2] 78 (1981) 80 1/16 (2034) 75 1/2 (1918) 74 3/4 (1899) 31 7/16 [2](799)[2] CWD CWD CWD CWD CWD CWD CWD CWD CWD CWD CWD CWD CWD CWD CWD CWD CWD CWD CWD CWD CWD CWD CWD CWD CWD CWD CWD CWD CWD CWD CWD CWD CWD CWD CWD CWD CWD CWD CWD CWD CWD CWD CWD CWD CWD CWD CWD CWD CWD CWD CWD CWD CWD CWD CWD CWD CWD CWD CWD CWD CWD CWD CWD CWD CWD CWD CWD CWD CWD CWD /32 (1890) 75 15/16 (1929) 72 3/4 (1848) 72 (1829) 31 7/16 (799) 70 13/32 (1788) 71 15/16 (1827) 68 3/4 (1746) 68 (1727) 29 7/16 (748) 66 13/32 (1687) 67 15/16 (1726) 64 3/4 (1645) 64 (1626) 27 7/16 (697) 62 13/32 (1585) 63 15/16 (1624) 60 3/4 (1543) 60 (1524) 25 7/16 (646) 58 13/32 (1484) 59 15/16 (1522) 56 3/4 (1441) 56 (1422) 23 7/16 (595) 54 13/32 (1382) 55 15/16 (1421) 52 3/4 (1340) 52 (1321) 21 7/16 (545) 34 13/32 (874) 35 15/16 (913) 32 3/4 (832) 32 (813) 11 7/16 (291) 38 13/32 (976) 39 15/16 (1014) 36 3/4 (933) 36 (914) 13 7/16 (341) 50 13/32 (1280) 51 15/16 (1319) 48 3/4 (1238) 48 (1219) 19 7/16 (494) 46 13/32 (1179) 47 15/16 (1218) 44 3/4 (1137) 44 (1118) 17 7/16 (443) 42 13/32 (1077) 43 15/16 (1116) 40 3/4 (1035) 40 (1016) 15 7/16 (392) CWD CWD CWD CWD CWD CWD CWD ELEVAION SYMBOL LEGEND: M.O. = MASONRY OPENING VALUES IN () ARE IN MILLIMEER CONVERSIONS VALUES IN [] ARE NUMBER OF DAYLIGH OPENINGS PER UNI Note: Elevations shown DO NO have exterior trim. Subtract 1/2 (12.7) from M.O. (Masonry Opening) for Unit Sizes. Masonry Openings above include Sill Nose, see rim Options page for Sill Nose specifications. For other rim Options refer to the Unit Sizing, Rough Opening & Masonry Openings page. SCALE: 1/8 = 1 October 2006 JELD-WEN reserves the right to change specifications without notice. Page 6-15

16 2-WIDE UNIS M.O. BRICKMOULD M.O. ADAMS/FLA CASING ROUGH OPENING FRAME SIZE DAYLIGH OPENING 46 (1168) 49 1/16 (1246) 43 1/2 (1105) 42 3/4 (1086) 15 7/16 [2](392)[2] 54 (1372) 57 1/16 (1449) 51 1/2 (1308) 50 3/4 (1289) 19 7/16 [2](494)[2] 62 (1575) 64 1/16 (1627) 59 1/2 (1511) 58 3/4 (1492) 23 7/16 [2](595)[2] 66 (1676) 68 1/16 (1729) 63 1/2 (1613) 62 3/4 (1594) 25 7/16 [2](646)[2] 70 (1778) 72 1/16 (1830) 67 1/2 (1715) 66 3/4 (1695) 27 7/16 [2](697)[2] 74 (1880) 76 1/16 (1932) 71 1/2 (1816) 70 3/4 (1797) 29 7/16 [2](748)[2] 78 (1981) 80 1/16 (2034) 75 1/2 (1918) 74 3/4 (1899) 31 7/16 [2](799)[2] CWD CWD CWD CWD CWD CWD CWD /32 (2093) 83 15/16 (2132) 80 3/4 (2051) 80 (2032) 35 7/16 (900) 78 13/32 (1994) 79 15/16 (2030) 76 3/4 (1949) 76 (1930) 33 7/16 (849) CWD CWD CWD CWD CWD CWD CWD /32 (2296) 91 15/16 (2335) 88 3/4 (2254) 88 (2235) 39 7/16 (1002) CWD CWD CWD CWD CWD CWD CWD /32 (2398) 95 15/16 (2437) 92 3/4 (2356) 92 (2337) 41 7/16 (1053) CWD CWD CWD CWD CWD CWD CWD /32 (2500) 99 15/16 (2538) 96 3/4 (2457) 96 (2438) 43 7/16 (1103) CWD CWD CWD CWD CWD CWD CWD ELEVAION SYMBOL LEGEND: M.O. = MASONRY OPENING VALUES IN () ARE IN MILLIMEER CONVERSIONS VALUES IN [] ARE NUMBER OF DAYLIGH OPENINGS PER UNI Note: Elevations shown DO NO have exterior trim. Subtract 1/2 (12.7) from M.O. (Masonry Opening) for Unit Sizes. Masonry Openings above include Sill Nose, see rim Options page for Sill Nose specifications. For other rim Options refer to the Unit Sizing, Rough Opening & Masonry Openings page. SCALE: 1/8 = 1 October 2006 JELD-WEN reserves the right to change specifications without notice. Page 6-16

17 2-WIDE UNIS M.O. BRICKMOULD M.O. ADAMS/FLA CASING ROUGH OPENING FRAME SIZE DAYLIGH OPENING 86 (2184) 88 1/16 (2237) 83 1/2 (2121) 82 3/4 (2102) 35 7/16 [2](900)[2] 94 (2388) 96 1/16 (2440) 91 1/2 (2324) 90 3/4 (2305) 39 7/16 [2](1002)[2] 102 (2591) 104 1/16 (2643) 99 1/2 (2527) 98 3/4 (2508) 43 7/16 [2](1103)[2] CWD CWD CWD CWD CWD CWD CWD CWD CWD CWD CWD CWD CWD CWD CWD CWD CWD CWD CWD CWD CWD CWD CWD CWD CWD CWD CWD CWD /32 (1890) 75 15/16 (1929) 72 3/4 (1848) 72 (1829) 32 1/2 (826) 70 13/32 (1788) 71 15/16 (1827) 68 3/4 (1746) 68 (1727) 30 1/2 (775) 66 13/32 (1687) 67 15/16 (1726) 64 3/4 (1645) 64 (1626) 28 1/2 (724) 62 13/32 (1585) 63 15/16 (1624) 60 3/4 (1543) 60 (1524) 26 1/2 (673) 58 13/32 (1484) 59 15/16 (1522) 56 3/4 (1441) 56 (1422) 24 1/2 (622) 54 13/32 (1382) 55 15/16 (1421) 52 3/4 (1340) 52 (1321) 22 1/2 (572) 34 13/32 (874) 35 15/16 (913) 32 3/4 (832) 32 (813) 12 1/2 (318) 50 13/32 (1280) 51 15/16 (1319) 48 3/4 (1238) 48 (1219) 20 1/2 (521) 46 13/32 (1179) 47 15/16 (1218) 44 3/4 (1137) 44 (1118) 18 1/2 (470) 42 13/32 (1077) 43 15/16 (1116) 40 3/4 (1035) 40 (1016) 16 1/2 (419) 38 13/32 (976) 39 15/16 (1014) 36 3/4 (933) 36 (914) 14 1/2 (368) CWD CWD CWD ELEVAION SYMBOL LEGEND: M.O. = MASONRY OPENING VALUES IN () ARE IN MILLIMEER CONVERSIONS VALUES IN [] ARE NUMBER OF DAYLIGH OPENINGS PER UNI Note: Elevations shown DO NO have exterior trim. Subtract 1/2 (12.7) from M.O. (Masonry Opening) for Unit Sizes. Masonry Openings above include Sill Nose, see rim Options page for Sill Nose specifications. For other rim Options refer to the Unit Sizing, Rough Opening & Masonry Openings page. SCALE: 1/8 = 1 October 2006 JELD-WEN reserves the right to change specifications without notice. Page 6-17

18 2-WIDE UNIS M.O. BRICKMOULD M.O. ADAMS/FLA CASING ROUGH OPENING FRAME SIZE DAYLIGH OPENING 86 (2184) 88 1/16 (2237) 83 1/2 (2121) 82 3/4 (2102) 35 7/16 [2](900)[2] 94 (2388) 96 1/16 (2440) 91 1/2 (2324) 90 3/4 (2305) 39 7/16 [2](1002)[2] 102 (2591) 104 1/16 (2643) 99 1/2 (2527) 98 3/4 (2508) 43 7/16 [2](1103)[2] 78 13/32 (1994) 79 15/16 (2030) 76 3/4 (1949) 76 (1930) 34 1/2 (876) CWD CWD CWD /32 (2093) 83 15/16 (2132) 80 3/4 (2051) 80 (2032) 36 1/2 (927) CWD CWD /32 (2296) 91 15/16 (2335) 88 3/4 (2254) 88 (2235) 40 1/2 (1029) CWD ELEVAION SYMBOL LEGEND: M.O. = MASONRY OPENING VALUES IN () ARE IN MILLIMEER CONVERSIONS VALUES IN [] ARE NUMBER OF DAYLIGH OPENINGS PER UNI Note: Elevations shown DO NO have exterior trim. Subtract 1/2 (12.7) from M.O. (Masonry Opening) for Unit Sizes. Masonry Openings above include Sill Nose, see rim Options page for Sill Nose specifications. For other rim Options refer to the Unit Sizing, Rough Opening & Masonry Openings page. SCALE: 1/8 = 1 October 2006 JELD-WEN reserves the right to change specifications without notice. Page 6-18

19 3-WIDE UNIS M.O. BRICKMOULD M.O. ADAMS/FLA CASING ROUGH OPENING FRAME SIZE DAYLIGH OPENING 67 3/8 (1711) 70 7/16 (1789) 64 7/8 (1648) 64 1/8 (1629) 15 7/16 [3](392)[3] 79 3/8 (2016) 82 7/16 (2094) 76 7/8 (1946) 76 1/8 (1934) 19 7/16 [3](494)[3] 91 3/8 (2321) 94 7/16 (2399) 88 7/8 (2257) 88 1/8 (2238) 23 7/16 [3](595)[3] 103 3/8 (2626) 106 7/16 (2704) 100 7/8 (2556) 100 1/8 (2543) 27 7/16 [3](697)[3] 115 3/8 (2931) 118 7/16 (3008) 112 7/8 (2867) 112 1/8 (2848) 31 7/16 [3](799)[3] 34 13/32 (874) 35 15/16 (913) 32 3/4 (832) 32 (813) 11 7/16 (291) 38 13/32 (976) 39 15/16 (1014) 36 3/4 (933) 36 (914) 13 7/16 (341) CWD CWD CWD CWD CWD CWD CWD CWD CWD CWD CWD CWD CWD CWD CWD CWD CWD CWD CWD CWD CWD CWD CWD CWD CWD CWD CWD CWD CWD CWD CWD CWD CWD CWD CWD CWD CWD CWD CWD CWD CWD CWD CWD CWD CWD /32 (1788) 71 15/16 (1827) 68 3/4 (1746) 68 (1727) 29 7/16 (748) 66 13/32 (1687) 67 15/16 (1726) 64 3/4 (1645) 64 (1626) 27 7/16 (697) 62 13/32 (1585) 63 15/16 (1624) 60 3/4 (1543) 60 (1524) 25 7/16 (646) 58 13/32 (1484) 59 15/16 (1522) 56 3/4 (1441) 56 (1422) 23 7/16 (595) 54 13/32 (1382) 55 15/16 (1421) 52 3/4 (1340) 52 (1321) 21 7/16 (545) 42 13/32 (1077) 43 15/16 (1116) 40 3/4 (1035) 40 (1016) 15 7/16 (392) 50 13/32 (1280) 51 15/16 (1319) 48 3/4 (1238) 48 (1219) 19 7/16 (494) 46 13/32 (1179) 47 15/16 (1218) 44 3/4 (1137) 44 (1118) 17 7/16 (443) CWD CWD CWD CWD CWD /32 (1890) 75 15/16 (1929) 72 3/4 (1848) 72 (1829) 31 7/16 (799) CWD CWD CWD CWD CWD ELEVAION SYMBOL LEGEND: M.O. = MASONRY OPENING VALUES IN () ARE IN MILLIMEER CONVERSIONS VALUES IN [] ARE NUMBER OF DAYLIGH OPENINGS PER UNI Note: Elevations shown DO NO have exterior trim. Subtract 1/2 (12.7) from M.O. (Masonry Opening) for Unit Sizes. Masonry Openings above include Sill Nose, see rim Options page for Sill Nose specifications. For other rim Options refer to the Unit Sizing, Rough Opening & Masonry Openings page. SCALE: 1/8 = 1 October 2006 JELD-WEN reserves the right to change specifications without notice. Page 6-19

20 3-WIDE UNIS M.O. BRICKMOULD M.O. ADAMS/FLA CASING ROUGH OPENING FRAME SIZE DAYLIGH OPENING 67 3/8 (1711) 70 7/16 (1789) 64 7/8 (1648) 64 1/8 (1629) 15 7/16 [3](392)[3] 79 3/8 (2016) 82 7/16 (2094) 76 7/8 (1946) 76 1/8 (1934) 19 7/16 [3](494)[3] 91 3/8 (2321) 94 7/16 (2399) 88 7/8 (2257) 88 1/8 (2238) 23 7/16 [3](595)[3] 103 3/8 (2626) 106 7/16 (2704) 100 7/8 (2556) 100 1/8 (2543) 27 7/16 [3](697)[3] 115 3/8 (2931) 118 7/16 (3008) 112 7/8 (2867) 112 1/8 (2848) 31 7/16 [3](799)[3] 78 13/32 (1994) 79 15/16 (2030) 76 3/4 (1949) 76 (1930) 33 7/16 (849) CWD CWD CWD CWD CWD /32 (2093) 83 15/16 (2132) 80 3/4 (2051) 80 (2032) 35 7/16 (900) CWD CWD CWD CWD CWD /32 (2296) 91 15/16 (2335) 88 3/4 (2254) 88 (2235) 39 7/16 (1002) CWD CWD CWD CWD CWD /32 (2398) 95 15/16 (2437) 92 3/4 (2356) 92 (2337) 41 7/16 (1053) CWD CWD CWD CWD CWD /32 (2500) 99 15/16 (2538) 96 3/4 (2457) 96 (2438) 43 7/16 (1103) CWD CWD CWD CWD CWD ELEVAION SYMBOL LEGEND: M.O. = MASONRY OPENING VALUES IN () ARE IN MILLIMEER CONVERSIONS VALUES IN [] ARE NUMBER OF DAYLIGH OPENINGS PER UNI Note: Elevations shown DO NO have exterior trim. Subtract 1/2 (12.7) from M.O. (Masonry Opening) for Unit Sizes. Masonry Openings above include Sill Nose, see rim Options page for Sill Nose specifications. For other rim Options refer to the Unit Sizing, Rough Opening & Masonry Openings page. SCALE: 1/8 = 1 October 2006 JELD-WEN reserves the right to change specifications without notice. Page 6-20

21 1-WIDE COAGE UNIS M.O. BRICKMOULD M.O. ADAMS/FLA CASING ROUGH OPENING FRAME SIZE DAYLIGH OPENING 24 5/8 (625) 27 11/16 (703) 22 1/8 (562) 21 3/8 (543) 15 7/16 (392) 28 5/8 (727) 31 11/16 (805) 26 1/8 (664) 25 3/8 (645) 19 7/16 (494) 32 5/8 (829) 35 11/16 (906) 30 1/8 (765) 29 3/8 (746) 23 7/16 (595) 34 5/8 (879) 37 11/16 (957) 32 1/8 (816) 31 3/8 (797) 25 7/16 (646) 36 5/8 (930) 39 11/16 (1008) 34 1/8 (867) 33 3/8 (848) 27 7/16 (697) 38 5/8 (981) 41 11/16 (1059) 36 1/8 (918) 35 3/8 (899) 29 7/16 (740) 40 5/8 (1032) 43 11/16 (1110) 38 1/8 (968) 37 3/8 (949) 31 7/16 (799) 58 13/32 (1484) 59 15/16 (1522) 56 3/4 (1441) 56 (1422) 19 7/16 (494) 27 7/16 (697) 50 13/32 (1280) 51 15/16 (1319) 48 3/4 (1238) 48 (1219) 15 7/16 (392) 23 7/16 (595) CWD2148C24 CWD2548C24 CWD2948C24 CWD3148C24 CWD3348C24 CWD3548C24 CWD3748C24 CWD2156C28 CWD2556C28 CWD2956C28 CWD3156C28 CWD3356C28 CWD3556C28 CWD3756C /32 (2093) 83 15/16 (2132) 80 3/4 (2051) 80 (2032) 31 7/16 (900) 39 7/16 (1002) 70 13/32 (1788) 71 15/16 (1827) 68 3/4 (1746) 68 (1727) 23 7/16 (595) 35 7/16 (900) 66 13/32 (1687) 67 15/16 (1726) 64 3/4 (1645) 64 (1626) 21 7/16 (545) 33 7/16 (849) CWD2164C34 CWD2564C34 CWD2964C34 CWD3164C34 CWD3364C34 CWD3564C34 CWD3764C34 CWD2168C36 CWD2568C36 CWD2968C36 CWD3168C36 CWD3368C36 CWD3568C36 CWD3768C36 E E E E CWD2180C40 CWD2580C40 CWD2980C40 CWD3180C40 CWD3380C40 CWD3580C40 CWD3780C40 ELEVAION SYMBOL LEGEND: M.O. = MASONRY OPENING VALUES IN () ARE IN MILLIMEER CONVERSIONS E BASIC UNI CLEAR OPENING EXCEEDS 20 IN WIDH, 24 IN HEIGH & A MINIMUM OF 5.7 SQ. F. ##* NUMBER INDICAES DESIGN PRESSURE (DP) RAING WIH SANDARD GLAZING. ##** REQUIRES APPLICAION OF SOOL FOR WAER RESISANCE. HIS APPLICAIONREDUCES CLEAR OPENING VERICALLY. SOOL ADDS 3/8 [10] MINIMUM OHEIGH OFINERIOR SILLSOP. Note: Elevations shown DO NO have exterior trim. Subtract 1/2 (12.7) from M.O. (Masonry Opening) for Unit Sizes. Masonry Openings above include Sill Nose, see rim Options page for Sill Nose specifications. For other rim Options refer to the Unit Sizing, Rough Opening & Masonry Openings page. SCALE: 1/8 = 1 October 2006 JELD-WEN reserves the right to change specifications without notice. Page 6-21

22 1-WIDE COAGE UNIS M.O. BRICKMOULD M.O. ADAMS/FLA CASING ROUGH OPENING FRAME SIZE DAYLIGH OPENING 44 5/8 (1133) 47 11/16 (1211) 42 1/8 (1070) 41 3/8 (1051) 35 7/16 (900) 48 5/8 (1235) 51 11/16 (1313) 46 1/8 (1172) 45 3/8 (1153) 39 7/16 (1002) 50 13/32 (1280) 51 15/16 (1319) 48 3/4 (1238) 48 (1219) 15 7/16 (392) 23 7/16 (595) CWD4148C24 CWD4548C /32 (1484) 59 15/16 (1522) 56 3/4 (1441) 56 (1422) 19 7/16 (494) 27 7/16 (697) CWD4156C28 CWD4556C /32 (1687) 67 15/16 (1726) 64 3/4 (1645) 64 (1626) 21 7/16 (545) 33 7/16 (849) CWD4164C34 CWD4564C /32 (1788) 71 15/16 (1827) 68 3/4 (1746) 68 (1727) 23 7/16 (595) 35 7/16 (900) CWD4168C36 CWD4568C36 ELEVAION SYMBOL LEGEND: M.O. = MASONRY OPENING VALUES IN () ARE IN MILLIMEER CONVERSIONS ##* NUMBER INDICAES DESIGN PRESSURE (DP) RAING WIH SANDARD GLAZING. ##** REQUIRES APPLICAION OF SOOL FOR WAER RESISANCE. HIS APPLICAION REDUCES CLEAR OPENING VERICALLY. SOOL ADDS 3/8 [10] MINIMUM O HEIGH OF INERIOR SILL SOP. Note: Elevations shown DO NO have exterior trim. Subtract 1/2 (12.7) from M.O. (Masonry Opening) for Unit Sizes. Masonry Openings above include Sill Nose, see rim Options page for Sill Nose specifications. For other rim Options refer to the Unit Sizing, Rough Opening & Masonry Openings page. SCALE: 1/8 = 1 October 2006 JELD-WEN reserves the right to change specifications without notice. Page 6-22

23 2-WIDE COAGE UNIS M.O. BRICKMOULD M.O. ADAMS/FLA CASING ROUGH OPENING FRAME SIZE DAYLIGH OPENING 46 (1168) 49 1/16 (1246) 43 1/2 (1105) 42 3/4 (1086) 15 7/16 [2](392)[2] 54 (1372) 57 1/16 (1449) 51 1/2 (1283) 50 3/4 (1289) 19 7/16 [2](494)[2] 62 (1575) 64 1/16 (1627) 59 1/2 (1511) 58 3/4 (1492) 23 7/16 [2](595)[2] 66 (1676) 68 1/16 (1729) 63 1/2 (1613) 62 3/4 (1594) 25 7/16 [2](646)[2] 70 (1778) 72 1/16 (1830) 67 1/2 (1715) 66 3/4 (1695) 27 7/16 [2](697)[2] 74 (1880) 76 1/16 (1932) 71 1/2 (1816) 70 3/4 (1797) 29 7/16 [2](740)[2] 78 (1981) 80 1/16 (2034) 75 1/2 (1918) 74 3/4 (1899) 31 7/16 [2](799)[2] CWD2148C24-2 CWD2548C24-2 CWD2948C24-2 CWD3148C24-2 CWD3348C24-2 CWD3548C24-2 CWD3748C24-2 CWD2156C28-2 CWD2556C28-2 CWD2956C28-2 CWD3156C28-2 CWD3356C28-2 CWD3556C28-2 CWD3756C /32 (1687) 67 15/16 (1726) 64 3/4 (1645) 64 (1219) 21 7/16 (545) 33 7/16 (849) 58 13/32 (1484) 59 15/16 (1522) 56 3/4 (1441) 56 (1422) 19 7/16 (494) 27 7/16 (697) 50 13/32 (1280) 51 15/16 (1319) 48 3/4 (1238) 48 (1219) 15 7/16 (392) 23 7/16 (595) CWD2164C34-2 CWD2564C34-2 CWD2964C34-2 CWD3164C34-2 CWD3364C34-2 CWD3564C34-2 CWD3764C /32 (1788) 71 15/16 (1827) 68 3/4 (1746) 68 (1727) 23 7/16 (595) 35 7/16 (900) CWD2168C36-2 CWD2568C36-2 CWD2968C36-2 CWD3168C36-2 CWD3368C36-2 CWD3568C36-2 CWD3768C /32 (2093) 83 15/16 (2132) 80 3/4 (2051) 80 (2032) 31 7/16 (799) 39 7/16 (1002) E E E E E E E E CWD2180C40-2 CWD2580C40-2 CWD2980C40-2 CWD3180C40-2 CWD3380C40-2 CWD3580C40-2 CWD3780C40-2 ELEVAION SYMBOL LEGEND: M.O. = MASONRY OPENING VALUES IN () ARE IN MILLIMEER CONVERSIONS E BASIC UNI CLEAR OPENING EXCEEDS 20 IN WIDH, 24 IN HEIGH & A MINIMUM OF 5.7 SQ. F. Note: Elevations shown DO NO have exterior trim. Subtract 1/2 (12.7) from M.O. (Masonry Opening) for Unit Sizes. Masonry Openings above include Sill Nose, see rim Options page for Sill Nose specifications. For other rim Options refer to the Unit Sizing, Rough Opening & Masonry Openings page. SCALE: 1/8 = 1 October 2006 JELD-WEN reserves the right to change specifications without notice. Page 6-23

24 2-WIDE COAGE UNIS M.O. BRICKMOULD M.O. ADAMS/FLA CASING ROUGH OPENING FRAME SIZE DAYLIGH OPENING 86 (2184) 88 1/16 (2237) 83 1/2 (2121) 82 3/4 (2102) 35 7/16 [2](900)[2] 94 (2388) 96 1/16 (2440) 91 1/2 (2324) 90 3/4 (2305) 39 7/16 [2](1002)[2] CWD4148C24-2 CWD4548C24-2 CWD4156C28-2 CWD4556C28-2 CWD4164C34-2 CWD4564C /32 (1788) 71 15/16 (1827) 68 3/4 (1746) 68 (1727) 23 7/16 (595) 35 7/16 (900) 66 13/32 (1687) 67 15/16 (1726) 64 3/4 (1645) 64 (1219) 21 7/16 (545) 33 7/16 (849) 58 13/32 (1484) 59 15/16 (1522) 56 3/4 (1441) 56 (1422) 19 7/16 (494) 27 7/16 (697) 50 13/32 (1280) 51 15/16 (1319) 48 3/4 (1238) 48 (1219) 15 7/16 (392) 23 7/16 (595) CWD4168C36-2 CWD4568C36-2 ELEVAION SYMBOL LEGEND: M.O. = MASONRY OPENING VALUES IN () ARE IN MILLIMEER CONVERSIONS VALUES IN [] ARE NUMBER OF DAYLIGH OPENINGS PER UNI Note: Elevations shown DO NO have exterior trim. Subtract 1/2 (12.7) from M.O. (Masonry Opening) for Unit Sizes. Masonry Openings above include Sill Nose, see rim Options page for Sill Nose specifications. For other rim Options refer to the Unit Sizing, Rough Opening & Masonry Openings page. SCALE: 1/8 = 1 October 2006 JELD-WEN reserves the right to change specifications without notice. Page 6-24

25 3-WIDE COAGE UNIS M.O. BRICKMOULD M.O. ADAMS/FLA CASING ROUGH OPENING FRAME SIZE DAYLIGH OPENING 67 3/8 (1711) 70 7/16 (1789) 64 7/8 (1648) 64 1/8 (1629) 15 7/16 [3](392)[3] 79 3/8 (2016) 82 7/16 (2094) 76 7/8 (1953) 76 1/8 (1934) 19 7/16 [3](494)[3] 91 3/8 (2321) 94 7/16 (2399) 88 7/8 (2257) 88 1/8 (2238) 23 7/16 [3](595)[3] 103 3/8 (2626) 106 7/16 (2704) 100 7/8 (2556) 100 1/8 (2543) 27 7/16 [3](697)[3] 115 3/8 (2931) 118 7/16 (3008) 112 7/8 (2867) 112 1/8 (2848) 31 7/16 [3](799)[3] 50 13/32 (1280) 51 15/16 (1319) 48 3/4 (1238) 48 (1219) 15 7/16 (392) 23 7/16 (595) CWD2148C24-3 CWD2548C24-3 CWD2948C24-3 CWD3348C24-3 CWD3748C /32 (2093) 83 15/16 (2132) 80 3/4 (2051) 80 (2032) 31 7/16 (799) 39 7/16 (1002) 70 13/32 (1788) 71 15/16 (1827) 68 3/4 (1746) 68 (1727) 23 7/16 (595) 35 7/16 (900) 66 13/32 (1687) 67 15/16 (1726) 64 3/4 (1645) 64 (1219) 21 7/16 (545) 33 7/16 (849) 58 13/32 (1484) 59 15/16 (1522) 56 3/4 (1441) 56 (1422) 19 7/16 (494) 27 7/16 (697) CWD2156C28-3 CWD2556C28-3 CWD2956C28-3 CWD3356C28-3 CWD3756C28-3 CWD2164C34-3 CWD2564C34-3 CWD2964C34-3 CWD3364C34-3 CWD3764C64-3 CWD2168C36-3 CWD2568C36-3 CWD2968C36-3 CWD3368C36-3 CWD3768C36-3 E E E E E E CWD2180C40-3 CWD2580C40-3 CWD2980C40-3 CWD3380C40-3 CWD3780C40-3 ELEVAION SYMBOL LEGEND: M.O. = MASONRY OPENING VALUES IN () ARE IN MILLIMEER CONVERSIONS VALUES IN [] ARE NUMBER OF DAYLIGH OPENINGS PER UNI E BASIC UNI CLEAR OPENING EXCEEDS 20 IN WIDH, 24 IN HEIGH & A MINIMUM OF 5.7 SQ. F. Note: Elevations shown DO NO have exterior trim. Subtract 1/2 (12.7) from M.O. (Masonry Opening) for Unit Sizes. Masonry Openings above include Sill Nose, see rim Options page for Sill Nose specifications. For other rim Options refer to the Unit Sizing, Rough Opening & Masonry Openings page. SCALE: 1/8 = 1 October 2006 JELD-WEN reserves the right to change specifications without notice. Page 6-25

26 1-WIDE REVERSE COAGE UNIS M.O. BRICKMOULD M.O. ADAMS/FLA CASING ROUGH OPENING FRAME SIZE DAYLIGH OPENING 24 5/8 (625) 27 11/16 (703) 22 1/8 (562) 21 3/8 (543) 15 7/16 (392) 28 5/8 (727) 31 11/16 (805) 26 1/8 (664) 25 3/8 (645) 19 7/16 (494) 32 5/8 (829) 35 11/16 (906) 30 1/8 (765) 29 3/8 (746) 23 7/16 (595) 34 5/8 (879) 37 11/16 (957) 32 1/8 (816) 31 3/8 (797) 25 7/16 (646) 36 5/8 (930) 39 11/16 (1008) 34 1/8 (867) 33 3/8 (848) 27 7/16 (697) 38 5/8 (981) 41 11/16 (1059) 36 1/8 (918) 35 3/8 (899) 29 7/16 (740) 40 5/8 (1032) 43 11/16 (1110) 38 1/8 (968) 37 3/8 (949) 31 7/16 (799) 50 13/32 (1280) 51 15/16 (1319) 48 3/4 (1238) 48 (1219) 23 7/16 (595) 15 7/16 (392) CWD2148R16 CWD2548R16 CWD2948R16 CWD3148R16 CWD3348R16 CWD3548R16 CWD3748R /32 (1484) 59 15/16 (1522) 56 3/4 (1441) 56 (1422) 27 7/16 (697) 19 7/16 (494) CWD2156R20 CWD2556R20 CWD2956R20 CWD3156R20 CWD3356R20 CWD3556R20 CWD3756R /32 (1687) 67 15/16 (1726) 64 3/4 (1645) 64 (1626) 33 7/16 (849) 21 7/16 (545) CWD2164R22 CWD2564R22 CWD2964R22 CWD3164R22 CWD3364R22 CWD3564R22 CWD3764R /32 (1788) 71 15/16 (1827) 68 3/4 (1746) 68 (1727) 35 7/16 (900) 23 7/16 (595) CWD2168R24 CWD2568R24 CWD2968R24 CWD3168R24 CWD3368R24 CWD3568R24 CWD3768R /32 (2093) 83 15/16 (2132) 80 3/4 (2051) 80 (2032) 39 7/16 (1002) 31 7/16 (900) E E E E CWD2180R32 CWD2580R32 CWD2980R32 CWD3180R32 CWD3380R32 CWD3580R32 CWD3780R32 ELEVAION SYMBOL LEGEND: M.O. = MASONRY OPENING VALUES IN () ARE IN MILLIMEER CONVERSIONS E BASIC UNI CLEAR OPENING EXCEEDS 20 IN WIDH, 24 IN HEIGH & A MINIMUM OF 5.7 SQ. F. ##* NUMBER INDICAES DESIGN PRESSURE (DP) RAING WIH SANDARD GLAZING. ##** REQUIRES APPLICAION OF SOOL FOR WAER RESISANCE. HIS APPLICAION REDUCES CLEAR OPENING VERICALLY. SOOL ADDS 3/8 [10] MINIMUM O HEIGH OF INERIOR SILL SOP. Note: Elevations shown DO NO have exterior trim. Subtract 1/2 (12.7) from M.O. (Masonry Opening) for Unit Sizes. Masonry Openings above include Sill Nose, see rim Options page for Sill Nose specifications. For other rim Options refer to the Unit Sizing, Rough Opening & Masonry Openings page. SCALE: 1/4 = 1 October 2006 JELD-WEN reserves the right to change specifications without notice. Page 6-26

27 1-WIDE REVERSE COAGE UNIS M.O. BRICKMOULD M.O. ADAMS/FLA CASING ROUGH OPENING FRAME SIZE DAYLIGH OPENING 44 5/8 (1133) 47 11/16 (1211) 42 1/8 (1070) 41 3/8 (1051) 35 7/16 (900) 48 5/8 (1235) 51 11/16 (1313) 46 1/8 (1172) 45 3/8 (1153) 39 7/16 (1002) 50 13/32 (1280) 51 15/16 (1319) 48 3/4 (1238) 48 (1219) 23 7/16 (595) 15 7/16 (392) CWD4148R16 CWD4548R /32 (1484) 59 15/16 (1522) 56 3/4 (1441) 56 (1422) 27 7/16 (697) 19 7/16 (494) CWD4156R20 CWD4556R /32 (1687) 67 15/16 (1726) 64 3/4 (1645) 64 (1626) 33 7/16 (849) 21 7/16 (545) CWD4164R22 CWD4564R /32 (1788) 71 15/16 (1827) 68 3/4 (1746) 68 (1727) 35 7/16 (900) 23 7/16 (595) CWD4168R24 CWD4568R24 ELEVAION SYMBOL LEGEND: M.O. = MASONRY OPENING VALUES IN () ARE IN MILLIMEER CONVERSIONS ##* NUMBER INDICAES DESIGN PRESSURE (DP) RAING WIH SANDARD GLAZING. ##** REQUIRES APPLICAION OF SOOL FOR WAER RESISANCE. HIS APPLICAION REDUCES CLEAR OPENING VERICALLY. SOOL ADDS 3/8 [10] MINIMUM O HEIGH OF INERIOR SILL SOP. Note: Elevations shown DO NO have exterior trim. Subtract 1/2 (12.7) from M.O. (Masonry Opening) for Unit Sizes. Masonry Openings above include Sill Nose, see rim Options page for Sill Nose specifications. For other rim Options refer to the Unit Sizing, Rough Opening & Masonry Openings page. SCALE: 1/4 = 1 October 2006 JELD-WEN reserves the right to change specifications without notice. Page 6-27

28 2-WIDE REVERSE COAGE UNIS M.O. BRICKMOULD M.O. ADAMS/FLA CASING ROUGH OPENING FRAME SIZE DAYLIGH OPENING 46 (1168) 49 1/16 (1246) 43 1/2 (1105) 42 3/4 (1086) 15 7/16 [2](392)[2] 54 (1372) 57 1/16 (1449) 51 1/2 (1283) 50 3/4 (1289) 19 7/16 [2](494)[2] 62 (1575) 64 1/16 (1627) 59 1/2 (1511) 58 3/4 (1492) 23 7/16 [2](595)[2] 66 (1676) 68 1/16 (1729) 63 1/2 (1613) 62 3/4 (1594) 25 7/16 [2](646)[2] 70 (1778) 72 1/16 (1830) 67 1/2 (1715) 66 3/4 (1695) 27 7/16 [2](697)[2] 74 (1880) 76 1/16 (1932) 71 1/2 (1816) 70 3/4 (1797) 29 7/16 [2](740)[2] 78 (1981) 80 1/16 (2034) 75 1/2 (1918) 74 3/4 (1899) 31 7/16 [2](799)[2] 50 13/32 (1280) 51 15/16 (1319) 48 3/4 (1238) 48 (1219) 23 7/16 (595) 15 7/16 (392) CWD2148R16-2 CWD2548R16-2 CWD2948R16-2 CWD3148R16-2 CWD3348R16-2 CWD3548R16-2 CWD3748R /32 (2093) 83 15/16 (2132) 80 3/4 (2051) 80 (2032) 39 7/16 (1002) 31 7/16 (799) 70 13/32 (1788) 71 15/16 (1827) 68 3/4 (1746) 68 (1727) 35 7/16 (900) 23 7/16 (595) 66 13/32 (1687) 67 15/16 (1726) 64 3/4 (1645) 64 (1219) 33 7/16 (849) 21 7/16 (545) 58 13/32 (1484) 59 15/16 (1522) 56 3/4 (1441) 56 (1422) 27 7/16 (697) 19 7/16 (494) CWD2156R20-2 CWD2556R20-2 CWD2956R20-2 CWD3156R20-2 CWD3356R20-2 CWD3556R20-2 CWD3756R20-2 CWD2164R22-2 CWD2564R22-2 CWD2964R22-2 CWD3164R22-2 CWD3364R22-2 CWD3564R22-2 CWD3764R22-2 CWD2168R24-2 CWD2568R24-2 CWD2968R24-2 CWD3168R24-2 CWD3368R24-2 CWD3568R24-2 CWD3768R24-2 E E E E E E E E CWD2180R32-2 CWD2580R32-2 CWD2980R32-2 CWD3180R32-2 CWD3380R32-2 CWD3580R32-2 CWD3780R32-2 ELEVAION SYMBOL LEGEND: M.O. = MASONRY OPENING VALUES IN () ARE IN MILLIMEER CONVERSIONS VALUES IN [] ARE NUMBER OF DAYLIGH OPENINGS PER UNI E BASIC UNI CLEAR OPENING EXCEEDS 20 IN WIDH, 24 IN HEIGH & A MINIMUM OF 5.7 SQ. F. Note: Elevations shown DO NO have exterior trim. Subtract 1/2 (12.7) from M.O. (Masonry Opening) for Unit Sizes. Masonry Openings above include Sill Nose, see rim Options page for Sill Nose specifications. For other rim Options refer to the Unit Sizing, Rough Opening & Masonry Openings page. SCALE: 1/8 = 1 October 2006 JELD-WEN reserves the right to change specifications without notice. Page 6-28