ASTM E 1886 and ASTM E 1996 TEST REPORT. Report No.: A Rendered to: GLASSCRAFT DOOR COMPANY Houston, Texas
|
|
- Steven Doyle
- 5 years ago
- Views:
Transcription
1 Architectural Testing ASTM E 1886 and ASTM E 1996 TEST REPORT Report No.: A Rendered to: GLASSCRAFT DOOR COMPANY Houston, Texas PRODUCT TYPE: In Swing Fiberglass Door with Side Lites SERIES/MODEL: Fiberglass Glazed Door This report contains in its entirety: Cover Page: 1 page Report Body: 10 pages Sketches: 3 pages Drawings: 13 pages Texas Firm F :50:03-05'00' :34:30-04'00' Test Dates: Through: Report Date: Test Record Retention End Date: 03/08/11 03/15/11 03/25/11 03/15/15
2 Page 1 of Report Issued To: GlassCraft Door Company 2002 Brittmoore Street Houston, Texas Test Laboratory: Architectural Testing, Inc Market Loop Southlake, Texas (817) Project Summary: 3.1 Product Type: In Swing Fiberglass Door with Side Lites 3.2 Series/Model: Fiberglass Glazed Door 3.3 Compliance Statement: Results obtained are tested values and were secured by using the designated test method(s). The samples tested met the performance requirements set forth in the referenced test procedures for a +1513/ 1657 Pa (+31.6/ 34.6 psf) Design Pressure with missile impacts corresponding to Wind Zone 4 and Missile Level D. 3.4 Test Dates: 03/08/ /15/ Test Location: Architectural Testing, Inc. test facility in Southlake, Texas. 3.6 Test Sample Source: The test specimens were provided by the client. Representative samples of the test specimens will be retained by Architectural Testing for a minimum of four years from the test completion date. 3.7 Drawing Reference: The test specimen drawings have been reviewed by Architectural Testing and are representative of the test specimen(s) reported herein. Test specimen construction was verified by Architectural Testing per the drawings located in Appendix B. Any deviations are documented herein or on the drawings. 3.8 List of Official Observers: Name Company Gene Denley Clint Barnett Tony Brown GlassCraft Architectural Testing, Inc. Architectural Testing, Inc.
3 Page 2 of Test Specification(s): ASTM E , Standard Test Method for Performance of Exterior Windows, Curtain Walls, Doors and Storm Shutters Impacted by Missile(s) and Exposed to Cyclic Pressure Differentials. ASTM E , Standard Specification for Performance of Exterior Windows, Glazed Curtain Walls, Doors and Storm Shutters Impacted by Wind Borne Debris in Hurricanes. 5.0 Test Specimen Description: 5.1 Product Sizes: Overall Area: Width Height 4.6 m² (49.4 ft 2 ) millimeters inches millimeters inches Overall size / Door leaf /4 Side panel (x2) /4 5.2 Frame Construction: Frame Member Material Description Head and jambs Compressed fiberboard 1 1/4" x 4 5/8" cross section Joinery Type Detail All corners Coped and butted Secured with four #9 x 3" wood screws 5.3 Leaf Construction: Leaf Member Material Other Rails and stiles Fiberglass clad foam core Solid, single pour foam core 5.4 Side Panel Construction: Leaf Member Material Other Rails and stiles Fiberglass clad foam core Solid, single pour foam core 5.5 Drainage: Sloped threshold was utilized.
4 Page 3 of Test Specimen Description: (Continued) 5.6 Weatherstripping: Description Quantity Location U shaped foam filled vinyl bulb gasket with vinyl tongue insert 1 Row Interior face frame jambs and head Rubber double row bottom door sweep 1 Row Threshold face bottom of door leaf 5.7 Glazing: Glass Type 1" IG Spacer Type 5/8" aluminum box spacer Interior Lite 1/8" tempered Exterior Lite Laminated consisting of 2 pieces of 1/8" tempered and 0.090"PVB interlayer Glazing Method Interior glazed against a fiberglass glass stop to the exterior and a screw in fiberglass glass stop to the interior. The glass was sealed full perimeter on the interior and exterior. Location Quantity Daylight Opening millimeters inches Glass Bite Door leaf x x " Side lite x x " 5.8 Hardware: Description Quantity Location Door hinge 4 12" and 28" from bottom; 9" and 34 1/2" from top; attached with two #9 x 3" and two #9 x 1" wood screws 3 point lock set 1 Lock stile of door leaf 5.9 Reinforcement: No reinforcement was utilized.
5 Page 4 of Installation: The specimen was installed into a Spruce Pine Fir wood buck. The rough opening allowed for a 1/4" shim space. Location Anchor Description Anchor Location Side panel jambs #9 x 3" wood screws 2" from corners and 12" o.c. thereafter Side panel head and sill #9 x 3" wood screw Center of side panel Door head and threshold #9 x 3" wood screws 4" from corners and center 7.0 Test Results: The results are tabulated as follows: ASTM E 1886, Large Missile Impact Conditioning Temperature: 24 C (75 F) Missile Weight: 4082 g (9.00 lbs) Missile Length: 2.4 m (8' 0") Muzzle Distance from Test Specimen: 4.9 m (16' 0") Test Unit #1: Orientation within ±5 of horizontal Impact #1: Missile Velocity: 15.4 m/s (50.5 fps) Impact Area: Center daylight opening Observations: Missile hit target area, no rupture or penetration Results: Pass Impact #2: Missile Velocity: 15.5 m/s (50.8 fps) Impact Area: Top right corner of daylight opening Observations: Missile hit target area, no rupture or penetration Results: Pass Note: See Architectural Testing Sketch #1 for impact locations.
6 Page 5 of Test Results: (Continued) Test Unit #2: Orientation within ±5 of horizontal Impact #1: Missile Velocity: 15.4 m/s (50.6 fps) Impact Area: Bottom left corner of daylight opening Observations: Missile hit target area, no rupture or penetration Results: Pass Impact #2: Missile Velocity: 15.5 m/s (50.7 fps) Impact Area: Center of daylight opening Observations: Missile hit target area, no rupture or penetration Results: Pass Note: See Architectural Testing Sketch #2 for impact locations. Test Unit #3: Orientation within ±5 of horizontal Impact #1: Missile Velocity: 15.4 m/s (50.6 fps) Impact Area: Top right corner of daylight opening Observations: Missile hit target area, no rupture or penetration Results: Pass Impact #2: Missile Velocity: 15.5 m/s (50.7 fps) Impact Area: Center of door hinge jamb Observations: Missile hit target area, no rupture or penetration Results: Pass Note: See Architectural Testing Sketch #3 for impact locations.
7 Page 6 of Test Results: (Continued) ASTM E 1886, Air Pressure Cycling Test Unit #1 Design Pressure: +1513/ 1657 Pa (+31.6/ 34.6 psf) Pressure Range Pa (psf) 303 to 757 (6.3 to 15.8) 0 to 908 (0 to 19.0) 757 to 1210 (15.8 to 25.3) 454 to 1513 (9.5 to 31.6) Pressure Range Pa (psf) 497 to 1657 (10.4 to 34.6) 828 to 1325 (17.3 to 27.7) 0 to 994 (0 to 20.8) 331 to 828 (6.9 to 17.3) Number of Cycles POSITIVE PRESSURE Average Maximum Deflection at Indicator mm (inches) Cycle Time (seconds) #1 #2 # (0.50) 12 (0.48) 9 (0.34) (0.57) 14 (0.54) 9 (0.37) (0.80) 19 (0.75) 12 (0.49) (0.97) 23 (0.92) 15 (0.60) Number of Cycles Permanent Set mm (inches) 4 (0.14) 3 (0.12) 3 (0.10) NEGATIVE PRESSURE Average Maximum Deflection at Indicator mm (inches) Cycle Time (seconds) #1 #2 # (0.68) 25 (0.97) 7 (0.26) (0.66) 22 (0.85) 6 (0.25) (0.64) 20 (0.78) 6 (0.23) (0.59) 15 (0.61) 5 (0.20) Permanent Set mm (inches) 5 (0.21) 4 (0.15) 3 (0.11) Observations: No additional damage or deglazing was observed. Result: Pass Note: See Architectural Testing Sketch #1 for indicator locations.
8 Page 7 of Test Results: (Continued) ASTM E 1886, Air Pressure Cycling Test Unit #2 Design Pressure: +1513/ 1657 Pa (+31.6/ 34.6 psf) Pressure Range Pa (psf) 303 to 757 (6.3 to 15.8) 0 to 908 (0 to 19.0) 757 to 1210 (15.8 to 25.3) 454 to 1513 (9.5 to 31.6) Pressure Range Pa (psf) 497 to 1657 (10.4 to 34.6) 828 to 1325 (17.3 to 27.7) 0 to 994 (0 to 20.8) 331 to 828 (6.9 to 17.3) Number of Cycles POSITIVE PRESSURE Average Maximum Deflection at Indicator mm (inches) Cycle Time (seconds) #1 #2 # (0.39) 10 (0.39) 9 (0.34) (0.46) 12 (0.46) 10 (0.38) (0.65) 16 (0.64) 13 (0.50) (0.88) 23 (0.89) 17 (0.65) Number of Cycles Permanent Set mm (inches) 2 (0.08) 2 (0.09) 2 (0.08) NEGATIVE PRESSURE Average Maximum Deflection at Indicator mm (inches) Cycle Time (seconds) #1 #2 # (0.41) 21 (0.81) 10 (0.41) (0.40) 19 (0.75) 10 (0.40) (0.35) 15 (0.59) 9 (0.35) (0.34) 14 (0.54) 9 (0.34) Permanent Set mm (inches) 2 (0.09) 3 (0.12) 3 (0.11) Observations: No additional damage or deglazing was observed. Result: Pass Note: See Architectural Testing Sketch #2 for indicator locations.
9 Page 8 of Test Results: (Continued) ASTM E 1886, Air Pressure Cycling Test Unit #3 Design Pressure: +1513/ 1657 Pa (+31.6/ 34.6 psf) Pressure Range Pa (psf) 303 to 757 (6.3 to 15.8) 0 to 908 (0 to 19.0) 757 to 1210 (15.8 to 25.3) 454 to 1513 (9.5 to 31.6) Pressure Range Pa (psf) 497 to 1657 (10.4 to 34.6) 828 to 1325 (17.3 to 27.7) 0 to 994 (0 to 20.8) 331 to 828 (6.9 to 17.3) Number of Cycles POSITIVE PRESSURE Average Maximum Deflection at Indicator mm (inches) Cycle Time (seconds) #1 #2 # (1.13) 23 (0.91) 15 (0.58) (0.81) 15 (0.60) 10 (0.39) (0.92) 18 (0.72) 11 (0.44) (0.89) 20 (0.77) 21 (0.81) Number of Cycles Permanent Set mm (inches) 2 (0.06) 3 (0.10) 2 (0.07) NEGATIVE PRESSURE Average Maximum Deflection at Indicator mm (inches) Cycle Time (seconds) #1 #2 # (0.39) 16 (0.63) 4 (0.16) (0.41) 18 (0.70) 5 (0.18) (0.36) 14 (0.57) 4 (0.16) (0.32) 11 (0.43) 4 (0.14) Permanent Set mm (inches) <1 (0.01) <1 (0.01) <1 (0.01) Observations: No additional damage or deglazing was observed. Result: Pass Note: See Architectural Testing Sketch #3 for indicator locations.
10 Page 9 of 10 General Note: Upon completion of testing, the specimens met the requirements of Section 7 of ASTM E Test Equipment: Cannon: Constructed from steel piping utilizing compressed air to propel the missile Missile: 2x4 Southern Pine Timing Device: Electronic Beam Type Cycling Mechanism: Computer controlled centrifugal blower with electronic pressure measuring device Deflection Measuring Device: Linear transducers
11 Page 10 of 10 Tape and film were used to seal against air leakage during structural testing. In our opinion, the tape and film did not influence the results of the test. The service life of this report will expire on the stated Test Record Retention End Date, at which time such materials as drawings, data sheets, samples of test specimens, copies of this report, and any other pertinent project documentation, shall be discarded without notice. If test specimen contains glazing, no conclusions of any kind regarding the adequacy or inadequacy of the glass in any glazed test specimen(s) can be made. This report does not constitute certification of this product nor an opinion or endorsement by this laboratory. It is the exclusive property of the client so named herein and relates only to the specimen(s) tested. This report may not be reproduced, except in full, without the written approval of Architectural Testing, Inc. For ARCHITECTURAL TESTING, Inc. Tony Brown Technician John H. Waskow, P.E. Director of Regional Operations Shawn G. Collins, P.E. Laboratory Support Engineer TB:jw/cmd Attachments (pages): This report is complete only when all attachments listed are included. Appendix A: Sketches (3) Appendix B: Drawings (13) This report produced from controlled document template ATI 00498, issued 12/28/10.
12 Appendix A Sketches
13 Sketch #1 Specimen #1 Indicator locations Impact locations
14 Sketch #2 Specimen #2 Indicator locations Impact locations
15 Sketch #3 Specimen #3 Indicator locations Impact locations
16 Appendix B Drawings
17
18
19
20
21
22
23
24
25
26
27
28
29
ASTM E 1886 and ASTM E 1996 TEST REPORT. Report No.: A Rendered to: GLASSCRAFT DOOR COMPANY Houston, Texas
Architectural Testing ASTM E 1886 and ASTM E 1996 TEST REPORT Report No.: A6458.01 801 18 Rendered to: GLASSCRAFT DOOR COMPANY Houston, Texas PRODUCT TYPE: Fiberglass In Swing Glazed Double Doors SERIES/MODEL:
More informationASTM E 1886 and ASTM E 1996 TEST REPORT. Report No.: A Rendered to: GLASSCRAFT DOOR COMPANY Houston, Texas
Architectural Testing ASTM E 1886 and ASTM E 1996 TEST REPORT Report No.: A6839.01 801 18 Rendered to: GLASSCRAFT DOOR COMPANY Houston, Texas PRODUCT TYPE: In Swing Fiberglass Double Doors with Speak Easy
More informationTEST REPORT. Report No.: G Rendered to: VELUX America LLC Greenwood, South Carolina
TEST REPORT Report No.: G4212.01-109-44 Rendered to: VELUX America LLC Greenwood, South Carolina PRODUCT TYPE: Skylight with Curb SERIES/MODEL: Specials Dome Skylight 0.118 thickness PC smooth/0.118 thickness
More informationPERFORMANCE TEST REPORT. Rendered to: AIR VENT, INC. SERIES/MODEL: Hip Ridge Vent PRODUCT TYPE: Ridge Vent
Architectural Testing PERFORMANCE TEST REPORT Rendered to: AIR VENT, INC. SERIES/MODEL: Hip Ridge Vent PRODUCT TYPE: Ridge Vent This report contains in its entirety: Cover Page: 1 page Report Body: 6 pages
More informationAAMA/WDMA/CSA 101/I.S.2/A TEST REPORT. Rendered to: MASTER WINDOW SYSTEMS, INC.
AAMA/WDMA/CSA 101/I.S.2/A440-05 TEST REPORT Rendered to: MASTER WINDOW SYSTEMS, INC. SERIES/MODEL: Master 2000 Double Hung Window PRODUCT TYPE: PVC Double Hung Window Summary of Results Title Test Specimen
More informationCALIBRATION REPORT. Rendered to: United States Aluminum Corp. LOCATION: Waxahachie, Texas
CALIBRATION REPORT Rendered to: United States Aluminum Corp. LOCATION: Waxahachie, Texas Report No.: 79241.01-801-47 Calibration Date: 12/14/07 Report Date: 03/20/08 2865 Market Loop Southlake, Texas 76092
More informationTEST REPORT. Report No.: G Rendered to: SKYCO SKYLIGHTS Costa Mesa, California
TEST REPORT Report No.: G1418.01-301-44 Rendered to: SKYCO SKYLIGHTS Costa Mesa, California PRODUCT TYPE: Fall Protection Security Bars SERIES/MODEL: FSB-1A/FSB-10A/FSB-1/FSB-10 SPECIFICATION: Occupational
More informationAAMA THERMAL PERFORMANCE REPORT (Revised) Rendered to: UNITED STATES ALUMINUM
AAMA 507-07 THERMAL PERFORMANCE REPORT (Revised) Rendered to: UNITED STATES ALUMINUM SERIES/MODEL: 7600 Projected Vent TYPE: Projecting (Awning - Single) Report No: Original Report Date: Revised Report
More informationCONSTRUCTION CONSULTING LABORATORY, INTERNATIONAL
TEST REPORT: SERIES 8220 ALUMINUM SINGLE HUNG WINDOW Prepared for: 5625 E. Firestone Boulevard South Gate, CA 90280 1601 Luna Road S-UNITED, INC. Office: (972) 242-0556 Carrollton, Texas 75006 A Quality
More informationNFRC U-FACTOR, SHGC / VT, CONDENSATION RESISTANCE COMPUTER SIMULATION REPORT. Rendered to: EARTHWISE GROUP, L.L.C.
Architectural Testing NFRC U-FACTOR, SHGC / VT, CONDENSATION RESISTANCE COMPUTER SIMULATION REPORT Rendered to: EARTHWISE GROUP, L.L.C. SERIES/MODEL: 143.095 DH 143.195 DH 145.095 DH 145.195 DH Baseline
More informationNFRC U-FACTOR, SHGC, VT, & CONDENSATION RESISTANCE COMPUTER SIMULATION REPORT. Rendered to: PARAMOUNT WINDOWS
Architectural Testing NFRC U-FACTOR, SHGC, VT, & CONDENSATION RESISTANCE COMPUTER SIMULATION REPORT Rendered to: PARAMOUNT WINDOWS SERIES/MODEL: 6700/ 6750/ 7700/ 8700/ 8750 Report Number: Report Date:
More informationNFRC U-FACTOR, SHGC / VT, CONDENSATION RESISTANCE COMPUTER SIMULATION REPORT. Rendered to: EARTHWISE GROUP, L.L.C.
Architectural Testing NFRC U-FACTOR, SHGC / VT, CONDENSATION RESISTANCE COMPUTER SIMULATION REPORT Rendered to: EARTHWISE GROUP, L.L.C. SERIES/MODEL: 143.095 SH 145.095 SH 143.095 SH Common Head Baseline
More informationAAMA/WDMA/CSA 101/I.S.2/A440-08
PERFORMANCE TESTS IN ACCORDANCE WITH AAMA/WDMA/CSA 101/I.S.2/A440-08 Product Manufacturer: Report No.: AI-04016-U1 Rev.1 ACRYLON PLASTICS 122 PAQUIN ROAD WINNIPEG, MANITOBA R2J 3V4 204-669-2345 Report
More informationAAMA THERMAL PERFORMANCE REPORT. Rendered to: TORO ALUMINUM. SERIES/MODEL: Commdoor 225 Awning (Project Out) TYPE: Projecting, Awning
Architectural Testing AAMA 507-12 THERMAL PERFORMANCE REPORT Rendered to: TORO ALUMINUM SERIES/MODEL: Commdoor 225 Awning (Project Out) TYPE: Projecting, Awning Report No: Report Date: 130 Derry Court
More informationNFRC U-FACTOR, SHGC / VT, CONDENSATION RESISTANCE COMPUTER SIMULATION REPORT. Rendered to: EARTHWISE GROUP, L.L.C. SERIES/MODEL: SS 145.
Architectural Testing NFRC U-FACTOR, SHGC / VT, CONDENSATION RESISTANCE COMPUTER SIMULATION REPORT Rendered to: EARTHWISE GROUP, L.L.C. SERIES/MODEL: 143.095 SS 145.095 SS Baseline Product for Validation
More informationNFRC U-FACTOR, SHGC / VT, CONDENSATION RESISTANCE COMPUTER SIMULATION REPORT. Rendered to: EARTHWISE GROUP, L.L.C.
Architectural Testing NFRC U-FACTOR, SHGC / VT, CONDENSATION RESISTANCE COMPUTER SIMULATION REPORT Rendered to: EARTHWISE GROUP, L.L.C. SERIES/MODEL: 143.191 Casement / Awning / Fixed Baseline Product
More informationAAMA THERMAL PERFORMANCE REPORT. Rendered to: UNITED STATES ALUMINUM. SERIES/MODEL: 3150 Curtain Wall TYPE: Glazed Wall System
AAMA 507-07 THERMAL PERFORMANCE REPORT Rendered to: UNITED STATES ALUMINUM SERIES/MODEL: 3150 Curtain Wall TYPE: Glazed Wall System Report No: Report Date: 08/22/08 130 Derry Court York, PA 17406-8405
More informationAAMA THERMAL PERFORMANCE REPORT. Rendered to: US ALUMINUM INC., DIVISION OF CR LAURENCE CO., INC.
Archi t ectural Testing THERMAL PERFORMANCE REPORT Rendered to: US ALUMINUM INC., DIVISION OF CR LAURENCE CO., INC. SERIES/MODEL: S80 Bi-Fold Door (1" Dual Glazed) TYPE: Swinging Door - Double Report No:
More informationTEST REPORT. Rendered to: HOMELAND VINYL PRODUCTS, INC. For: PVC Guardrail System Utilizing New Nylon/PVC Rail Mounting Bracket
TEST REPORT Rendered to: HOMELAND VINYL PRODUCTS, INC. For: PVC Guardrail System Utilizing New Nylon/PVC Rail Mounting Bracket Report No: Report Date: 10/31/12 130 Derry Court York, PA 17406-8405 phone:
More informationAAMA/WDMA/CSA 101/I.S.2/A440-08
PERFORMANCE TESTS IN ACCORDANCE WITH AAMA/WDMA/CSA 101/I.S.2/A440-08 Product Manufacturer: Report No.: AI-04016-T1 Rev.1 ACRYLON PLASTICS 122 PAQUIN ROAD WINNIPEG, MANITOBA R2J 3V4 204-669-2345 Report
More informationSINGLE SLIDING WINDOW 1000 SERIES 4-1/2" FRAME SINGLE SLIDER LIFT OUT
PERFORMANCE EVALUATION OF SINGLE SLIDING WINDOW 1000 SERIES 4-1/2" FRAME SINGLE SLIDER LIFT OUT For Dominion Doors & Windows Ltd. IN ACCORDANCE WITH: AAMA/WDMA/CSA 101/I.S.2/A440-11 AND A440S1-17 Report
More informationNFRC U-FACTOR, SHGC, VT, & CONDENSATION RESISTANCE COMPUTER SIMULATION REPORT. (Revised) Rendered to: SPECIALTY WHOLESALE SUPPLY
NFRC U-FACTOR, SHGC, VT, & CONDENSATION RESISTANCE COMPUTER SIMULATION REPORT (Revised) Rendered to: SPECIALTY WHOLESALE SUPPLY SERIES/MODEL: 4000 / 4500 DuraGard XT Double Hung Report Number: Original
More informationCREEP PERFORMANCE TEST REPORT. Rendered to: TREX COMPANY LLC. Seclusions Composite Privacy Fence System TYPE: Composite Fence System
Architectural Testing CREEP PERFORMANCE TEST REPORT Rendered to: TREX COMPANY LLC Seclusions Composite Privacy Fence System TYPE: Composite Fence System Report No.: Report Date: Expiration Date: 130 Derry
More informationAAMA THERMAL PERFORMANCE REPORT. Rendered to: TUBELITE, INC. SERIES/MODEL: 200 Series Curtainwall (E2297) TYPE: Glazed Wall System
AAMA 507-03 THERMAL PERFORMANCE REPORT Rendered to: TUBELITE, INC. SERIES/MODEL: 200 Series Curtainwall (E2297) TYPE: Glazed Wall System Report No: Report Date: 05/23/07 130 Derry Court York, PA 17406-8405
More informationGENERATOR SHELTER IMPACT TEST REPORT (.08 Material)
GENERATOR SHELTER IMPACT TEST REPORT (.08 Material) Florida Division of Emergency Management 2555 Shumard Oak Boulevard Tallahassee, FL 32399 Office: 850-413-9969 Department of Management Services 4050
More informationNFRC U-FACTOR, SHGC, VT, & CONDENSATION RESISTANCE COMPUTER SIMULATION REPORT. Rendered to: PARAMOUNT WINDOWS CORPORATION
Architectural Testing NFRC U-FACTOR, SHGC, VT, & CONDENSATION RESISTANCE COMPUTER SIMULATION REPORT Rendered to: PARAMOUNT WINDOWS CORPORATION SERIES/MODEL: ECO-View 6100/7100 Report Number: B6000.01-301-45
More informationNFRC U-FACTOR, SHGC, VT, & CONDENSATION RESISTANCE COMPUTER SIMULATION REPORT. Rendered to: CR LAURENCE CO., INC.
FRC U-FACTOR, SHGC, VT, & CODESATIO RESISTACE COMPUTER SIMULATIO REPORT Rendered to: CR LAURECE CO., IC. SERIES/MODEL: StormWall XL Curtain Wall Report umber: Report Date: 10/14/16 FRC U-FACTOR, SHGC,
More informationNew Gateway 101/I.S.2/A440
Architectural Testing Informational Bulletin #16 March 7, 2005 Topic: Comparison of the new AAMA/WDMA/CSA 101/I.S.2/A440-05 to the previously published industry standards. The purpose of this ATI-TIPS
More informationAmerican National Standard
STANDARD METHOD FOR TESTING SECTIONAL DOORS, ROLLING DOORS, AND FLEXIBLE DOORS: DETERMINATION OF STRUCTURAL PERFORMANCE UNDER MISSILE IMPACT AND CYCLIC WIND PRESSURE Door & Access Systems Manufacturers
More informationNFPA 285 TEST REPORT. Report No.: H Test Date: June 1, Rendered to: ARCONIC ARCHITECTURAL PRODUCTS Eastman, Georgia
NFPA 285 TEST REPORT Report No.: H1152.01-121-24 Test Date: June 1, 2017 Rendered to: ARCONIC ARCHITECTURAL PRODUCTS Eastman, Georgia WALL SYSTEM: Exterior Non-loadbearing Wall Assembly COMBUSTIBLE COMPONENTS:
More informationOriginally Issued: 09/26/2012 Revised: 09/29/2017 Valid Through: 09/30/2018
EVALUATION SUBJECT: FAKRO FX, FV FVE, FX-EL, FV-ELA, AND FVE-ELA SKYLIGHTS REPORT HOLDER: FAKRO GROUP 144A WEGIERSKA STREET 33 300 NOWY SACZ POLAND 48 18-444 0444 www.fakro.info CSI Division: 08 00 00
More informationALUMINUM HORIZONTAL ROLLER WINDOW
ALUMINUM HORIZONTAL ROLLER WINDOW Series HR610 Monolithic glazing does not provide hurricane protection. Specifications: Window members are extruded from a minimum of 6063-T5 aluminum alloy Frame members
More informationWood and Aluminum EnduraClad Exterior 6' 8" and 6' 10" Size Tables
6' 8" and 6' 10" Size Tables Scale 1/8" = 1' 0" All doors and sidelights are glazed with tempered glass. For windows and patio doors with HurricaneShield impact-resistant glass, see product instructions
More informationAIR-INS inc. 1320, boul. Lionel-Boulet, Varennes (Québec) J3X 1P7 Tél. : (450) Fax : (450)
1320, boul. Lionel-Boulet, Varennes (Québec) J3X 1P7 Tél. : (450) 652-0838 Fax : (450) 652-7588 info@air-ins.com FORCED-ENTRY RESISTANCE TESTS AS PER THE ASTM F476-84(2002) TESTING PROCEDURE ON AN ENTRANCE
More information3948 Townsfair Way, Suite 200 July 2013 Columbus, Ohio Toll Free Website
3948 Townsfair Way, Suite 200 July 2013 Columbus, Ohio 43219 Toll Free 800-746-6686 Website www.simonton.com E-Mail archdetails@simonton.com Product Guide Specification Specifier Notes: This product guide
More informationSubmittal Requirements for Product Evaluation - Doors
TEXAS DEPARTMENT OF INSURANCE Engineering Services / MC 103-3A 333 Guadalupe Street P.O. Box 149104 Austin, Texas 78714-9104 Phone No. (512) 322-2212 Fax No. (512) 463-6693 Submittal Requirements for Product
More informationcontinuous mounting flange intended for direct attachment to roofing substrate.
DIVISION: 08 - OPENINGS Section: 08 62 23 Tubular Skylight Section: 08 63 13 Domed Metal-Framed Skylight REPORT HOLDER: VELUX America, Inc. P.O. Box 5001 Greenwood, South Carolina 29648-5001 (864) 941-4828
More informationEuro Vista Pivot. Approved for use in Miami-Dade HVHZ Zones Florida Building Code Approved Product Approval FL FOLDING SLIDING STACKING PIVOT
Euro Vista Pivot IMPACT & non-impact Aluminum & Wood Pivot Doors Approved for use in Miami-Dade HVHZ Zones Florida Building Code Approved Product Approval FL 22410 www.euro-wall.com 888.989.EURO (3876)
More informationAluminum Series SH600 Product Specifications
Product Specifications Monolithic glazing does not provide hurricane protection. Specifications: Window members are extruded from a minimum of 6063-T5 aluminum alloy Frame members have a nominal depth
More informationAlumaView AV200. A. Section Metal Fabrications: Miscellaneous for steel supports.
AlumaView AV200 PART 1 GENERAL 1.1 SECTION INCLUDES A. Commercial sectional doors. 1.2 RELATED SECTIONS A. Section 05500 - Metal Fabrications: Miscellaneous for steel supports. B. Section 08710 - Door
More informationEuro Vista Pivot FPA HVHZ AMIA MI-DA DE H V HZ AFLO RIDA PRO D UC T
AFLO RIDA PRO D UC T AMIA MI-DA DE H V HZ Euro Vista Pivot Aluminum & Wood Pivot Doors PPROVED FPA PPROVED HVHZ Approved for use in Miami-Dade HVHZ Zones Florida Building Code Approved Product Approval
More informationNote: PGT reserves the right to change material design and/or construction without notice or liability Window Height
ALUMINUM SINGLE HUNG WINDOW Series SH600 Monolithic glazing does not provide hurricane protection. Specifications: Window members are extruded from a minimum of 6063-T5 aluminum alloy Frame members have
More informationGeneral Information SECTION DIRECTORY
SECTION DIRECTORY General Information Product Summary... V-AW-2 Product Selection Guide... V-AW-3 Size and Performance Data... V-AW-3 Features and Options... V-AW-3 Sound Transmission Class and Outdoor-Indoor
More informationSuperior by Design. Euro vista wood impact/non impact rated wood folding door systems
Superior by Design. Euro vista wood impact/non impact rated wood folding door systems Approved for use in Miami-Dade HVHZ Zones Florida Building Code Approved Product Approval FL 15472 www.euro-wall.com
More informationPRE-HUNG ENTRY DOOR SYSTEMS
AC101_Achiever_Residential_02.15_Layout 1 2/10/15 10:15 AM Page 1 Pre-Hung Entry Door Systems Commercial Residential Adjustable Steel & Wood Jambs Steel & Fiberglass Doors Rated & Non-Rated PRE-HUNG ENTRY
More informationContents. Preface 6. 1 Scope General Outside of scope Terminology Units of measurement 13 1.
Contents Preface 6 0 Introduction 8 0.1 General 8 0.1.1 Applicability 8 0.1.2 Sustainability 8 0.1.3 Content 8 0.2 Performance Classes and Grades 9 0.2.1 General 9 0.2.2 Guidance for the specifier/purchaser
More informationSuperior by Design EURO (3876)
Superior by Design. Euro-C2 Aluminum Folding Door System www.euro-wall.com 888.989.EURO (3876) Specifications Euro-C2 Exterior Aluminum Folding Door System Maximum / Minimum Specifications Max Panel Weight:
More informationEclipse C3 Aluminum Folding Door System. Dealer Brochure Exterior folding door systems
Exterior folding door systems www.eclipsearchitectural.com Eclipse C3 Aluminum Folding Door System Dealer Brochure 2012 Eclipse C3 Aluminum Folding Door System, C3 Fabricator to Dealer Brochure Revision
More informationA. This Section includes the following types of sectional overhead doors:
SECTION 08361 - SECTIONAL OVERHEAD DOORS PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 1 Specification
More informationIMPACT TESTING ON SAFETY GLAZING MATERIAL. Rendered to:
IMPACT TESTING ON SAFETY GLAZING MATERIAL Rendered to: ECKELT GLAS GMBH Resthofstraße 18 4400 Steyr Austria Report No: 01-49266.03 Test Date: 01/29/04 Report Date: 03/26/04 6 mm Tempered Transparent Glass
More informationReport No 2370/ This Report consists of 40 pages. Authority & date Request by Client dated 25 November 2010
Test Report Report No 2370/7612199 This Report consists of 40 pages Client Smarts Systems Limited Arnolds Way Yatton BS49 4QN Authority & date Request by Client dated 25 November 2010 Items tested 3 off
More informationDF COLLECTION. Architectural Detail Guide Hybrid Awning Window DF 3113 TABLE OF CONTENTS
TABLE OF CONTENTS Specifications... 1-2 Quick Spec Guide... 1-3 Clear Opening and Daylight Specifications... 1-5 General Information Multiple Assemblies... 1-6 Handing and Operation... 1-7 Elevation Drawing
More informationEquivalency Evaluation to 2010 FBC
Equivalency Evaluation to 2010 FBC Date: PTC Report No.: Report Revision No.: PTC Project No.: Product Mfg.: Product Name: Product Category: Product Sub-Category: Compliance Method: Prepared By: December
More informationFrench View Primed Hinged Patio Doors Premium Wood
TABLE OF CONTENTS Specifications... 12-2 QuickSpecGuide... 12-4 Elevations:1/4 Scale... 12-5 In-SwingDoors... 12-7 CenterHingeDoors... 12-10 Out-SwingDoors... 12-12 GlazingOptions:3 Scale... 12-16 TrimOptions:3
More informationNFRC U-FACTOR, SHGC, VT, & CONDENSATION RESISTANCE COMPUTER SIMULATION REPORT. (Revised) Rendered to: EARTHWISE GROUP, L.L.C
NFRC U-FACTOR, SHGC, VT, & CONDENSATION RESISTANCE COMPUTER SIMULATION REPORT (Revised) Rendered to: EARTHWISE GROUP, L.L.C SERIES/MODEL: 623.620 Patio Door Report Number: Original Report Date: Revised
More informationSTATUS OF NHTSA S EJECTION MITIGATION RESEARCH. Aloke Prasad Allison Louden National Highway Traffic Safety Administration
STATUS OF NHTSA S EJECTION MITIGATION RESEARCH Aloke Prasad Allison Louden National Highway Traffic Safety Administration United States of America Stephen Duffy Transportation Research Center United States
More informationEURO VISTA FOLD. Approved for use in Miami-Dade HVHZ Zones Florida Building Code Approved Product Approval FL FOLDING SLIDING STACKING PIVOT
EURO VISTA FOLD IMPACT RATED Aluminum FOLDING Doors Approved for use in Miami-Dade HVHZ Zones Florida Building Code Approved Product Approval FL 17838 www.euro-wall.com 888.989.EURO (3876) FOLDING SLIDING
More informationProduct Guide Specification
July 2013 3948 Townsfair Way, Suite 200 Columbus, Ohio 43219 Toll Free 800-746-6686 Website www.simonton.com E-Mail archdetails@simonton.com Product Guide Specification Specifier Notes: This product guide
More informationDASMA DASMA
DASMA 108-2017 Standard Method For Testing Sectional Garage Doors And Rolling Doors: Determination Of Structural Performance Under Uniform Static Air Pressure Difference DASMA 108-2017 Door & Access Systems
More informationHURRICANESHIELD IMPACT-RESISTANT GLASS SECTION DIRECTORY. Size and performance summary. Glazing performance. Grille profiles and patterns.
SECTIN DIRECTRY Size and performance summary Glazing performance Grille profiles and patterns Size tables Design Data Detailed Product Description Cross sections The information published in this document
More informationU-Factor, Solar Heat Gain Coefficient, Visible Transmittance and Condensation Resistance Calculation Report
U-Factor, Solar Heat Gain Coefficient, Visible Transmittance and Condensation Resistance Calculation Report REPORT NO: NCTL-110-16086-01 SIMULATION DATE: 08/30/13 REPORT DATE: 08/30/13 Client: Product
More informationFLEXIBLE, DEPENDABLE AND GOOD-LOOKING.
FLEXIBLE, DEPENDABLE AND GOOD-LOOKING. Expect more from your windows and doors. CHALLENGER SERIES WINDOWS & DOORS INTRODUCTION About Ventana Windows & Doors Ventana Windows & Doors Inc. manufactures vinyl
More informationTM MANUFACTURERS
TM200 1.1 MANUFACTURERS A. Acceptable Manufacturer: Raynor, which is located at: 1101 East River Rd. P. O. Box 448 ; Dixon, IL 61021-0448; Toll Free Tel: 800-4-RAYNOR; Tel: 815-288-1431; Fax: 888-598-4790;
More informationPENTAGON PROTECTION USA
PENTAGON PROTECTION USA Shock Tube Testing for Window Systems March 2009 San Antonio, Texas ABS Consulting Project Number 2127174 ABSG Consulting, Inc. 14607 San Pedro, Suite 215 San Antonio, TX 78232
More informationDIVISION: OPENINGS SECTION: UNIT SKYLIGHTS REPORT HOLDER: VELUX AMERICA LLC POST OFFICE 5001 GREENWOOD, SOUTH CAROLINA 29648
0 Most Widely Accepted and Trusted ICC-ES Evaluation Report ICC-ES 000 (800) 423-6587 (562) 699-0543 www.icc-es.org ESR-4108 Issued 12/2017 This report is subject to renewal 12/2018. DIVISION: 08 00 00
More informationPella 450 Series. Size and performance summary. Glazing performance. Grille profiles and patterns. Size tables. Design Data
SECTION DIRECTORY Pella 450 Series Size and performance summary Glazing performance Grille profiles and patterns Size tables Design Data Detailed Product Description Cross sections The information published
More informationArchitect Series Traditional
SECTION DIRECTORY Product Selection Guide Size and Performance Data... OSBF-2 Glazing Performance... OSBF-3 Grille Types... OSBF-7 Design Data Vent... OSBF-11 Detailed Product Descriptions... OSBF-14 Unit
More informationCode Compliance Research Report CCRR-0258
Code Compliance Research Report CCRR-0258 Issue Date: 10-31-2016 Renewal Date: 10-31-2017 DIVISION: 07 THERMAL AND MOISTURE PROTECTION Section: 07 45 00 Fiber-reinforced Cementitious Panels Nichiha USA
More informationAluminum Wood Double-Hung Windows
Replacement Parts Table of Contents Exploded View... 38 Parts List... 39 Liners and Stops... 40 --- 41 Picture Glass Bead and Cutting Schedule... 41 Picture Glass... 42 --- 43 Sash Assembly... 44 --- 47
More information2000T TERRACE DOOR. Features
AUGUST, 0 000T TERRACE DOOR FEATURES Features Performance class and grade: Single: AW-PG90-ATD Pairs: AW-PG45/65-ATD Inswing or outswing -/4" deep door rails and stiles Mitered door and frame corners Heavy
More informationGuide Specification SECTION VINYL WINDOWS
February 2018 3948 Townsfair Way, Suite 200 Columbus, Ohio 43219 Toll Free 800-746-6686 Website www.simonton.com Email archdetails@simonton.com Guide Specification Specifier Notes: This guide specification
More informationU-Factor, Solar Heat Gain Coefficient, Visible Transmittance and Condensation Resistance Calculation Report
U-Factor, Solar Heat Gain Coefficient, Visible Transmittance and Condensation Resistance Calculation Report REPORT NO: NCTL-110-14975-01 SIMULATION DATE: 03/25/13 REPORT DATE: 03/25/13 Client: Product
More informationSliding Patio Doors Builders Vinyl
TABLE OF CONTENTS Specifications... 7-2 QuickSpecGuide... 7-3 Elevations/Sizes: 1/4 Scale 2-Panel... 7-4 3-Panel... 7-5 2-Panel withtransom... 7-6 Sidelite... 7-8 Transom... 7-9 3-PanelTransom... 7-10
More informationTEA2 Architects LAKE SUPERIOR RESIDENCE TECHNICAL GUIDE C AWNING WINDOWS
TEA2 Architects LAKE SUPERIOR RESIDENCE TECHNICAL GUIDE C AWNING WINDOWS PRODUCT FEATURES STYLES Traditional, Push Out and Mission options. STANDARD FEATURES Natural, clear Douglas Fir interior (no visible
More informationSECTION SECTIONAL OVERHEAD DOORS. Display hidden notes to specifier. (Don't know how? Click Here)
SECTION 08360 SECTIONAL OVERHEAD DOORS Display hidden notes to specifier. (Don't know how? Click Here) Copyright 2006-2017 ARCAT, Inc. - All rights reserved ** NOTE TO SPECIFIER ** Raynor; commercial sectional
More informationCHAPTER 3 INTEGRITY WOOD ULTREX DOUBLE HUNG
CHAPTER 3 INTEGRITY WOOD ULTREX DOUBLE HUNG Specifications / NFRC Values... 3.2 Egress, Lite and Vent Measurements... 3.3 Egress, Lite and Vent Measurements / Abbreviations... 3.4 Sizing Guidelines / Measurement
More informationWA67 Folding System - Aluminum Clad Over Wood
TABLE OF CONTENTS WA67 WA67 Folding System - Aluminum Clad Over Wood Features.......................................................................................................................... 1
More informationV3 Series Awning Windows (2011 to Present)
What s in This Section Standard and Custom Windows...................................... Page 3 Parts Illustration........................................................... 3 Options- Exterior..................................................
More informationProduct Guide Specification
October 2011 3948 Townsfair Way, Suite 200 Columbus, Ohio 43219 Toll Free 800-746-6686 Website www.simonton.com E-Mail archdetails@simonton.com Product Guide Specification Specifier Notes: This product
More informationSECTION DIRECTORY. Designer Series DS-AW-1 AWNING
SECTION DIRECTORY Designer Series Product Selection Guide Size and Performance Data... DS-AW-2 Features and Options... DS-AW-3 Combination Assemblies... DS-AW-4 Glazing Performance... DS-AW-5 Grille Types
More informationKolbe Teutonic Series Air-Water-Structural Test Reports Manual
Revision Date: March 15, 2016 Indicates test reports entered on current revision date Kolbe Teutonic Series Air-Water-Structural Test Reports Manual kolbecommercial.com KOLBE & KOLBE MILLWORK CO., INC.
More information100 Series Awning Windows (2008 to Present)
100 Series Awning Windows (2008 to Present) CCParts Catalog Main Menu Section TOC Search What s in This Section Standard and Custom Windows...................................... Page 3 Parts Illustration...........................................................
More information24" DLO 24" DLO 1 1/2" 1 1/2" 1 1/2" 1 1/2" 1 1/2" " FRAME DIMENSION 34" DAYLITE OPENING 1/8" 85 1/2" FRAME DIMENSION 3 OPP 3.
SERIES 87-AR SINGLE AND DOUBLE BUTT HINGE HUNG DOORS W/ & W/O SIDELITE(S), W/ & W/O TRANSOM SHOWN WITH OPTIONAL CRL WOOD FLUSH DOOR SYSTEM DESIGNED TO WRAP -7/8" ( MM) WALLS DESIGNED FOR TOP LOAD GASKETS
More information5400 Armor Max Plus Windows Maximum Impact Protection
5400 Armor Max Plus Windows Maximum Impact Protection Exceptional hurricane protection, beauty, energy efficiency, security, safety and sound reduction. America s Toughest, Prettiest and Most Versatile
More informationTechnical Guide B Casement Windows. Casement Windows. Technical Guide B1
B Technical Guide B Casement Windows Technical Guide B1 Product Features Styles Traditional, Push Out and Mission options. Standard Features Natural, clear Douglas Fir interior (no visible finger joints)
More informationSection Traffic Doors
Section 08380 Traffic Doors SR 9000 Series Part 1: General 1.1 Summary 1. ABS outer skin, foamed in place insulated High Impact Traffic Doors. 2. Lower hinge guards 3. Spring Bumpers, Impact Plates 4.
More informationArchitect Series Traditional
SECTION DIRECTORY Architect Series Traditional Product Selection Guide Size and Performance Data...W-HG-2 STC/OITC...W-HG-2 Features and Options...W-HG-3 Combination Assemblies...W-HG-4 Glazing Performance...W-HG-6
More informationSteelForm S-24C SECTIONAL OVERHEAD DOORS
SteelForm S-24C SECTIONAL OVERHEAD DOORS ** NOTE TO SPECIFIER ** Raynor; commercial sectional overhead doors. This section is based on the products of Raynor, which is located at: 1101 East River Rd. P.
More informationVoluntary Specification for Determining Forced Entry Resistance of Side-Hinged Door Systems
Task Group Approval Council Approval Product Group Approval Successful Re-ballot 16-1052 Successful Ballot (#17-1011) Out for Ballot #18-1016 AAMA 1304-XX DRAFT #7 DATED 2/21/2018 Voluntary Specification
More informationTechnical Guide C. CAwning Windows. Technical Guide C1
Technical Guide C Windows C Technical Guide C1 Product Features Specifications Styles Traditional, Push Out and Mission options. Standard Features Natural, clear Douglas Fir interior (no visible finger
More informationMeeting Residential Energy Requirements with Wood-Frame Construction
Meeting Residential Energy Requirements with Wood-Frame Construction Building Code Requirements Wood and wood-based products are widely used in building construction, due in part to favorable energy performance
More informationSpecifications... Quick Spec Guide...
TABLE OF CONTENTS Specifications........................................... Quick Spec Guide....................................... Elevations/Sizes: 1/4" Scale Full Awning Units..................................
More informationE3 Architecture WINDERMERE PROJECT TECHNICAL GUIDE J SWINGING TERRACE & FRENCH TERRACE DOORS
E3 Architecture WINDERMERE PROJECT TECHNICAL GUIDE J SWINGING TERRACE & FRENCH TERRACE DOORS PRODUCT FEATURES SPECIFICATIONS STYLES Traditional, French, Camber Top, Quarter Round and Full Radius options.
More informationThermaSeal TM220 SECTIONAL OVERHEAD DOORS
ThermaSeal TM220 SECTIONAL OVERHEAD DOORS ** NOTE TO SPECIFIER ** Raynor; commercial sectional overhead doors. This section is based on the products of Raynor, which is located at: 1101 East River Rd.
More information260/360/560 INSULCLAD ENTRANCES
FEBRUARY, 2011 260/360/560 INSULCLAD ENTRANCES FEATURES 1 Features 260 Insulclad has 2-11/16" vertical stile, 2-13/16" top and 4-7/16" bottom rail 360 Insulclad has 4-1/16" vertical stile, 4-1/16" top
More informationL. Roberto Lomas P.E. Engineering Evaluation Report 233 W. Main St. Danville, VA 24541 Report No.: 512711 434-688-0609 rllomas@lrlomaspe.com Manufacturer: Product Line: Altech Panel Systems, LLC 1 Johnson
More informationENTRANCEWAYS. CUSTOM SIZING in 1 8" (3) increments SECTION REFERENCE ENTRANCEWAYS. Residential Springline Entry Doors
ENTRANCEWAYS ENTRANCEWAYS Entranceways SECTION REFERENCE Residential Springline Entry s Dimensions & Specifi cations... 193 Details... 194-195 Residential Arch & Rectangular Entry s & Sidelight Dimensions
More informationReport No: Test of: Reversible aluminium/timber window. Tested to: BS :2009 Performance of windows & doors Part 2: Operation & strength
Report No: 181947 Test of: Reversible aluminium/timber window Tested to: BS 6375-2:2009 Performance of windows & doors Part 2: Operation & strength For: A/S Peder Nielsen Beslagfabrik Norregade 25 Bronderslev
More informationWilliam R. Heiden III, P.E.
William R. Heiden III, P.E. Georgia-Pacific Gypsum, LLC Product Evaluation Report 5/8" DensGlass Sheathing Mechanical Fastening to Steel Framing Glass-Mat Gypsum Substrate for use as Sheathing Applicable
More informationVoluntary Specification for Determining Forced Entry Resistance of Side-Hinged Door Systems
Task Group Approval Council Approval Product Group Approval Successful Re-ballot 16-1052 Successful Ballot (#17-1011) Out for Ballot #17-1062 AAMA 1304-XX DRAFT #6 DATED 10/4/2017 Voluntary Specification
More information