Mono Rail + Next Day Shipment with Rollon s MOVE FAST Program. Configure Online Now and Order by 2pm for Next Day Shipment
|
|
|
- Hillary Fields
- 5 years ago
- Views:
Transcription
1 Next Day Shipment with Rollon s MOVE FAST Program Mono Rail + Configure Online Now and Order by 2pm for Next Day Shipment Quantities of up to 20 blocks and 10 rails can be ordered per transaction for fast delivery. For larger quantities, standard lead times apply. Class N with either Clearance or 2% preload are available for fast delivery. For other accuracy classes or preloads, please call Rollon toll free at: Rails longer than the standard length can be available but extra manufacturing time is required. Configure and Order Now at:
2 Mono Rail + Load Capacity Calculate Service Life C 0ax L 10 = C ( ) 3 x 10 5 meters P M x M z C 0rad For a full description of linear guide life formula please see our full Rollon Mono Rail catalog available at M y Load capacities [kn] Static moments [Nm] Load capacities [kn] Static moments [Nm] dyn. C stat. C0 rad M x M y M z stat. C0 ax dyn. C stat. C0 rad M x M y M z stat. C0 ax MRSO15 MRSO15W MRTO15 MRTO15W MRSO30 MRSO30W MRTO30 MRTO30W MRSO20 MRSO20W MRTO20 MRTO20W MRSO20L MRSO20LW MRSO25 MRSO25W MRTO25 MRTO25W MRZO25W MRSO30L MRSO30LW MRSO35 MRTO35 MRTO35W MRSO35L MRSO35LW MRSO25L MRSO25LW MRZO25LW
3 Series MRSO / MRSO carriage with flange Series MRTO carriage with flange MRSO MRSO MRSO20L MRSO MRSO25L MRTO MRTO MRTO MRTO MRTO MRSO MRSO30L MRSO MRSO35L
4 Next Day Shipment with Rollon s MOVE FAST Program Series MRSO...W / MRSO...LW carriage without flange Series MRTO...W / MRTO...LW carriage without flange Series MRZO...W / MRZO...LW carriage without flange MRSO15W MRSO20W MRSO20LW MRSO25W MRSO25LW MRSO30W MRSO30LW MRSO35W MRSO35LW MRTO15W MRTO20W MRTO25W MRTO30W MRTO30LW MRTO35W MRTO35LW MRZO25W MRZO25LW
5 Next Day Shipment with Rollon s MOVE FAST Program Series MRRO top mount rail D g1 G3 H1 W1 d P Rail W 1 H 1 P L max D x d x g 1 MRRO x 4.5 x 5.3 MRRO x 6 x 8.5 MRRO x 7 x 9 MRRO x 9 x 12 MRRO x 9 x 12 Series MRRO F rail mounted from below Rail W 1 H 1 P M x g 3 L max Rail [kg/m] MRRO15...F M5 x MRRO20...F M6 x MRRO25...F M6 x MRRO30...F M8 x MRRO35...F M8 x Maximum rail length in one piece is 4000mm. However for the fast delivery program, the limit is 3960mm. Longer rails can be accomplished by joining rails, but an extended delivery time is required. Please consult with Rollon concerning your application and rail length requirement.
6 Rail Interchange Chart ROLLON MonoRail+ Old Rollon MonoRail THK STAR CPC IKO NSK HIWIN INA NB THOMSON SCHNEEBERGER Standard Linear Guide Series Std. flanged carriage with counterbore MRS0 MRS HSR B, CB 1651 HRC...FN LWH B LH FL LGW-CB AG AA or AT A Long flanged carriage with counterbore MRS0 L MRS L HSR LB, HB 1653 HRC FL LWHG LH HL LGW-HB KUSE L AG BA Std. flanged carriage with tapped holes MRS0 MRS HSR A, CA 1651 HRC...FN LWHT B LH EL LGW-CA KUVE AG AA or AT A BMA Long flanged carriage with tapped holes MRS0 L MRS L HSR LA, HA 1653 HRC FL LWHTG LH GL LGW-HA KUVE L / KUSE L AG BA BMB Std. slim high carriage MRS0 W MRS W HSR R 1621 HRC MN LWHD B LH AN LGH-CA KUSE H / KUVE H AG EE, T BMC Long slim high carriage MRS0 LW MRS LW HSR LR 1624 HRC FL LWHDG LH BN LGH-HA KUVE HL -- BMD Std. slim carriage MRZ0 W MRZ W SHS L 1622 ERC...MN LWHS B LY AL, AN KUSE H, HL AG CE, EE, T Long slim carriage MRZ0 LW MRZ LW SHS LV 1623 ERC...ML LWHSG LY BL, BN LGH HA KUSE HL AG DE, HE Low Profile Linear Guide Series Low profile, short flanged block MRT0 S MRT S SR SB 1663 ARC FS LWEC LS KL AGW-SB SGL E Low profile, standard flanged block MRT0 MRT SR TB 1693 ARC FN LWEC LS FL AGW-CB SGL TE AT G LWEG 1661 LWETC LS JL SGL E LWETC LS EL AGW-CA SGL TE AT G Low profile, short slim block MRT0 SW MRT SW SR V 1664 ARC MS LWESC LS CL AGH-SA SGL F Low profile, standard slim block MRT0...W MRT...W SR W 1694 ARC...MN LWESC LS AL AGH-CA SGL TF AT F / AG CE Rail Styles Top mount rail MRRO..Length (mm) 1605 AR Miniature Linear Guide Series Wide Linear Guide Roller Linear Guide Series Bottom mount rail MRRO Length (mm)...f 1607 ARU SSR Miniature monorail with std. rail width MR MN O442 LWLC PU.. MN Miniature monorail with std. rail width MR MN RSR ZM O442 MR MN LWLC LU AL or TL MGN. C KUME SEBS A MN Miniature monorail with std. rail width MR MN RSR VM, KM, V O442 MR MN LWLG LU BL MGN.H SEBS AY MN LWETG LWESG LWE Q LWLFC LE CL -- MN Miniature monorail with wide rail width MR WN RSR WVM,WM or WV O443 MR WN LWLF LE AL or TL MGW.C THDM..W / KWEM..W SEBS WA MN Miniature monorail with wide rail width MR WN RSR WZM O443 MR WN LWLFG PE.. MGW. H SEBS WAY MN HRA LWFH -- HRW CA 1671 LWFF LW EL -- HRW CR LWFS -- LRXC LRX RA..EM RUE D MRA SRG-LC 1853 LRXG RA..GM RUE DL MRB LRXDC 1821 LRXD RA..AN RUE DH MRC SRG-LR(V) 1824 LRXDG RA..BN RUE DHL MRD VR CRW CRG VRU LMT LMT K LTF LTF K CRWU LSAG LSAGT LSAGF LSAGFT
7 Ordering Key Rail Only MRRO 20 N F T XXX 20mm Bottom Mount, Rail only, 10450mm long in 3 pieces, 35mm to first hole and 10mm to last hole Surface coating Last Hole Pitch: Distance from the last hole to the end of the rail First Hole Pitch: distance from the end of the rail to the first hole Joined Rails (option): number of Rails empty 1 rail or T=1 Rail Mounted from Below (option): F if below, blank if from Top Total Rail Length: (in mm 5 digits) Precision Class: N, H, P Size: 15, 20, 25, 30, 35, 45 Rail : MRRO Rail only Ordering Example: MMRO20-N F-T Rail composition: 1x3965+1x2520+1x3965 (only for joint processed rails) Hole pattern: 35-66x60-30//30-42x60-30//30-66X60-35 (always specify hole pattern separately) Notes on ordering: The rail lengths are always indicated as 5 digits with 0 prefixes Carriage Only MRZO 25 W N VC A XXX Surface coating Seal Style A: Lubrication Pad (included), ball cage option Preload Class: VC Clearance; V0 2%; V1 5%; V2 8% Precision Class: N, H, P Block Style: L Long, W Slim, No mark Standard Flange Size: 15, 20, 25, 30, 35, 45 Carriage : MRSO Standard Height; MRTO low height; MRZO Med Height Ordering Example: MRZO25W-N-VC-A ROLLON Corporation - USA All addresses of our global sales partners can also be found in the internet at Bilby Road. Suite B Hackettstown, NJ Phone: (+1) info@rolloncorp.com Changes and errors excepted. The text and images may be used only with our permission. RL_MR_MFP_US_07/15
Mono Rail +
Mono + www.rollon.com Content Mono + Technical features overview 1 Product explanation Profile rails for the highest degree of precision 2 Technical data Performance characteristics and notes Load capacities
Active without pressure compact and powerful: The Clamping and Braking Element with spring-loaded energy storage UB.
UB Contact section Wedge slide gear Piston Linear guide Active without pressure compact and powerful: The Clamping and Braking Element with spring-loaded energy storage UB. The UB series combines the technology
Active without Pressure and Efficient: The Clamping and Braking Element with spring-loaded energy storage BW.
Locating shoulder Contact section Wedge slide gear Spring-loaded energy storage Piston Linear guide Active without Pressure and Efficient: The Clamping and Braking Element with spring-loaded energy storage
CURVILINE.
CURVILINE www.rollon.com About Rollon Development of global business Continual expansion and optimization of the portfolio 1975 Parent company, Rollon S.r.l., founded in Italy 1991 Founding of Rollon GmbH
A LEADING MANUFACTURER IN LINEAR MOTION GERALD SUMMERS is now an authorised distributor of Rollon TEL: 0800 055 6663 E-MAIL: SALES@GERALD-SUMMERS.CO.UK WWW.GERALD-SUMMERS.CO.UK CURVILINE www.rollon.com
SHS. Caged Ball LM Guide Global Standard Size Model SHS. Point of Selection. Point of Design. Options. Model No. Precautions on Use
Caged Ball LM Guide Global Standard Size Model LM block LM rail Endplate End seal 45 Ball Ball cage Cross section 45 * For the Ball Cage, see. Point of Selection Point of Design Options Model No. Precautions
Hydraulic heavy load brake: The Braking and Clamping Element with membrane technology KB. Locating shoulder. Contact section.
KB Locating shoulder Contact section Membrane Integrated positive fit reset spring Linear guide Hydraulic heavy load brake: The Braking and Clamping Element with membrane technology KB. The KB series is
Specifi cation Table. SSR-XW A 14.7 to to SSR-XV A 9.1 to to SSR-XTB A 14.7 to to 36.4
Types of s THK offers a wide array of types and dimensions with s as standard so that you can select the optimal product for any application. With the unit structure of each model, you can easily obtain
511E. LM Guide General Catalog
General Catalog A Classification Table of the s Ball Guide Caged Ball Type Full-ball Type Standard Type Standard Type Model SHS Global Standard Size Model SSR Radial Model HSR 4-way Equal Load Model SR
EASY RAIL.
EASY RAIL www.rollon.com About Rollon Development of global business Continual expansion and optimization of the portfolio 1975 Parent company, Rollon S.r.l., founded in Italy 1991 Founding of Rollon GmbH
MONO RAIL.
MONO RAIL www.rollon.com About Rollon Development of global business Continual expansion and optimization of the portfolio 1975 Parent company, Rollon S.r.l., founded in Italy 1991 Founding of Rollon GmbH
A LEADING MANUFACTURER IN LINEAR MOTION GERALD SUMMERS is now an authorised distributor of Rollon TEL: 0800 055 6663 E-MAIL: SALES@GERALD-SUMMERS.CO.UK WWW.GERALD-SUMMERS.CO.UK MINIATURE MONO RAIL www.rollon.com
SRG. Caged Roller LM Guide Ultra-high Rigidity Type Model SRG. Point of Selection. Point of Design. Options. Model No. Precautions on Use
Caged Roller LM Guide Ultra-high Rigidity Type Model LM block LM rail End seal Endplate 45 45 Caged roller Roller 45 Cross section 45 * or the caged roller, see. Point of Selection A Point of Design Options
RSR-M1. LM Guide High Temperature Type Model RSR-M1. Point of Selection. Point of Design. Options. Model No. Precautions on Use
LM Guide High Temperature Type Model Endplate SUS34 LM block THK EX5 End seal (High temperature rubber) LM rail THK EX5 Ball SUS44C Grease nipple SUS34 Point of Selection A Point of Design Options Model
NSK Linear Guides. Roller Guide RA Series. Extended series
NSK Linear Guides A roller guide series employing advanced analysis technology offers super-high load capacity and rigidity. The RA series includes a complete lineup to handle a wide range of applications.
HSR. LM Guide Global Standard Size Model HSR. Point of Selection. Point of Design. Options. Model No. Precautions on Use
LM Guide Global Standard Size Model Retainer plate Endplate End seal Grease nipple Ball Retainer plate Inner seal (Optional) Side seal LM rail Cross section 45 45 Point of Selection A Point of Design Options
Cylinders Series 61 - Aluminium profile
CATALOGUE > Release 8. Cylinders Series 6 - Aluminium profile MOVEMENT > Cylinders Series 6 Single, double-acting, magnetic, cushioned ø 32, 40, 50, 63, 80, 00, 25 (ISO 5552)» ISO 5552 (corresponding to
2-3 Miniature MGN/MGW Series Features of MGN Series
54 G99TE08-0405 2-3 Miniature MGN/MGW Series 2-3-1 Features of MGN Series 2-3-2 Construction of MGN Series Cap Block End cap End seal Grease nipple Ball Bottom seal Retainer Rolling Circulation System:
Sizes 32, 40, 50 and 63
> Series 6E electromechanical cylinders C_Electrics > 207 Series 6E electromechanical cylinders Sizes 32, 40, 50 and 63 The Series 6E cylinders are mechanical linear actuators with rod, in which the rotary
Mono Rail.
Mono Rail www.rollon.com When you move. We move Rollon S.p.A. was founded in 1975 as a manufacturer of linear motion components. Today Rollon group is a leading name in the design, production, and sale
Class Quality Module Total Tooth Thickness Max. Feed Force per Applications (Examples) Pitch Tolerance Length Pinion Contact/
Overview of Integrated Rack 90 Arrangement 180 Arrangement Adjusting between rack and rai not necessary Space-saving and performance-optimized design can be reaized Different types of integrated racks
Linear Guideways ov -linear -guidew ays-divider - U pdated
Linear Guideways ov-linear-guideways-divider - Updated - 11-01-2017 163 Linear Guideways Linear Guideways Introduction L1016 Linear guideways Linear guideways are widely used throughout industry for heavy-duty
Aluminium profile. TANDEM: Double thrust and traction forces. LOW FRICTION: Friction force reduced by over 40%
CATALOGUE > Release 8.7 > Series 6 cylinders Series 6 cylinders - Aluminium profile Single and double-acting, magnetic, cushioned Standard, low friction, low temperatures and tandem versions ø 32, 40,
...components in motion. Miniature Linear Guideways
...components in motion Miniature Linear Introduction Miniature linear guideway systems are widely used throughout industry for precise, compact applications. Precise and Stainless The gothic arch shape
HSR-M1. LM Guide High Temperature Type Model HSR-M1. Point of Selection. Point of Design. Options. Model No. Precautions on Use
LM Guide High Temperature Type Model Endplate SUS304 End seal (High temperature rubber material) LM THK-EX50 Ball SUS440C Side seal (High temperature rubber material) LM rail THK-EX50 Cross section 45
Pneumatic cylinders, piston-ø mm Double acting with magnetic piston DIN ISO 15552
Pneumatic cylinders, piston-ø 32 100 mm Double acting with magnetic piston DIN ISO 15552 Technical data for series SL 050 450 Order code SL-032-0250-050 Series Piston-Ø Stroke length (mm) Type of cylinder
ACTUATORLINE ELM series
ACTUATORLINE ELM series www.rolloncorp.com www.motiontech.com.au Contents Series Overview 1 The Components 2 The Linear Motion System 3 Main Technical Characteristics 4 ELM 50 SP 6 ELM 65 SP 7 ELM 80 SP
Bore ø 32, 40, 50, 63, 80, 100, 125 Ports 32 = 1/8, 40/50 = 1/4, 63/80 = 3/8, 100/125 = 1/2
6 S E R I E S Cylinders Series 6 Catalog 2006 Single, double acting, magnetic (DIN/ISO 643) Bore: ø 32, 40, 50, 63, 80, 00, 25 cushioned [ /4, 9/6, 2, 2 /2, 3 /8, 4, 5 inch approximations] The Series 6
...components in motion. Curviline Rail
...components in motion Curviline Curviline Introduction The Curviline rail system offers a cost-effective solution to curvi-linear applications. Flexibility when you need it Constant radius, variable
SVR/SVS. Caged Ball LM Guide Ultra-heavy Load Type for Machine Tools Model SVR/SVS. Point of Selection. Point of Design. Options. Model No.
Caged Ball Guide Ultra-heavy Load Type for Machine Tools Model Protector 90 rail Ball cage Radial type model SVR Cross section 40 50 Ball * For the Ball Cage, see A. 4-Way Type Model SVS Cross section
Profi le rail guides LLR
Profi le rail guides LLR Content The SKF brand now stands for more than ever before, and means more to you as a valued customer. While SKF maintains its leadership as the hallmark of quality bearings throughout
Series 32 compact magnetic cylinders 1/ Single and double-acting, non-rotating ø 20, 25, 32, 40, 50, 63, 80, 100 mm
Series 32 compact magnetic cylinders Single and double-acting, non-rotating ø 20, 25, 32, 40, 50, 63, 80, 00 mm»» In compliance with ISO 2287»» Compact design»» Wide range of models available in different
Aluminium tube and profile
> Series 63 cylinders CATALOGUE > 206 Series 63 cylinders - Aluminium tube and profile New Single and double-acting, magnetic, cushioned Versions: standard, low friction, high and low temperatures ø 32,
Single and double-acting, magnetic, cushioned Standard, low friction, low temperatures and tandem versions ø 32, 40, 50, 63, 80, 100, 125mm
CATALOGUE > Release 8.8 > Series 60 cylinders Series 60 cylinders Single and double-acting, magnetic, cushioned Standard, low friction, low temperatures and tandem versions ø 32, 40, 50, 63, 80, 00, 25mm»»
Aluminium profile. Double-acting, magnetic, cushioned ø 32, 40, 50, 63, 80, 100 mm
> Series 62 cylinders CATALOGUE > Release 8.6 Series 62 cylinders - Aluminium profile Double-acting, magnetic, cushioned ø 32, 40, 50, 63, 80, 00 mm»» In compliance with ISO 5552 standards and with the
TELESCOPIC RAIL.
TEESCOPIC RAI www.rollon.com About Rollon Development of global business Continual expansion and optimization of the portfolio 1975 Parent company, Rollon S.r.l., founded in Italy 1991 Founding of Rollon
Single and double-acting, magnetic, cushioned Standard, low friction and low temperature versions ø 32, 40, 50, 63, 80, 100, 125mm
CATALOGUE > Release 8.6 > Series 60 cylinders Series 60 cylinders New version Single and double-acting, magnetic, cushioned Standard, low friction and low temperature versions ø 32, 40, 50, 63, 80, 00,
SSR. Caged Ball LM Guide Radial Type Model SSR. Point of Selection. Point of Design. Options. Model No. Precautions on Use
Caged Ball LM Guide Radial Type Model Endplate LM block End seal LM 90 30 Ball Ball cage Cross section * For the Ball Cage, see A. Point of Selection A Point of Design Options Precautions on Use Accessories
Clean Room System www.motiontech.com.au Linear units ONE series INTL. PATENT PENDING 1 ONE series ONE series ONE series description Fig. 1 The ONE series actuators are belt driven linear actuators specifi
The Block Structure. Linear block SBG, SBS, SPG and SPS types are available. All blocks are dimensionally interchangeable.
Circular arc groove Two pint contact structure of circular arc groove. It keeps the function of self-aligning and smooth rolling performance. 45 angle of contact Four rows of circular arc groove contact
12.3 Full Roller Type, MSR Series
12.3 Full Roller Type, MSR Series A. Construction Carriage End Seal Grease Nipple End Cap Inner Seal Roller Bottom Seal 45 Rail 45 B. Characteristics The full roller type linear guideway, MSR series, equip
Four Row Linear Recirculating Ball Bearing and Guideway Assembly with Gear Rack
Four Row Linear Recirculating Ball Bearing and Guideway Assembly with Gear Rack Series KUVE..SB ZHP Features NEW! Guideway with Gear Rack Four Row Linear Recirculating Ball Bearing and Guideway Assembly
Aluminium profile. Double-acting, cushioned, magnetic ø mm
> Series 4 cylinders Series 4 cylinders - Aluminium profile Double-acting, cushioned, magnetic ø 60-200 mm»» In compliance with ISO 643/ VDMA 24562 standards»» Rolled stainless steel rod»» Adjustable pneumatic
Tie rods cylinders to ISO standard
Tie rods cylinders to ISO 5552 standard seriescpui DESCRIPTION Cylinders series CPUI comply with ISO 5552 standard, being in this way completely interchangeable with the well-known cylinders to ISO 643
506E. LM Guide Actuator General Catalog
LM Guide Actuator General Catalog A LM Guide Actuator General Catalog A Product Descriptions 506E Caged Ball LM Guide Actuator Model SKR.. A2-4 Structure and Features... A2-4 Caged Ball Technology... A2-6
Introduction of Each Series
12 Introduction of Each Series 12.1 eavy Load Type, MSA Series A. Construction LINEAR GUIDEWAY Upper Retainer Carriage End Cap End Seal Grease Nipple Ball Lower Retainer Rail 45 eavy Load Type, MSA Series
Extruded Body Cylinders, ISO 6431, ISO compliant Series 61
1 ISO / VDMA Cylinders NORTH AMERICAN CYLINDER & ACTUATOR CATALOG > Release 8.5 Extruded Body Cylinders, ISO 6431, ISO 15552 compliant Series 61 Single or double-acting, magnetic, cushioned Standard and
RSR. LM Guide Miniature Types Model RSR. Point of Selection. Point of Design. Options. Model No. Precautions on Use
LM Guide Miniature Types Model Endplate LM block End seal LM rail Ball Grease nipple Cross section Point of Selection A Point of Design Options Model No. Precautions on Use Accessories for Lubrication
Any reproduction, even partial, is allowed only by written permission by Rollco.
LINEAR UNIT E-SMART Every care has been taken to ensure the accuracy of the information contained in this catalogue, but no liability can be accepted for any errors or omissions. We reserve the right to
ARC/HRC/ERC series Linear motion technology
ARC/HRC/ERC series Linear motion technology ARC/HRC/ERC Ball Type Linear Guide Series 1 Murietta Street. Chino, CA. 917 ARC0M91EN ARC0M91EN Product Overview Inner Lubrication storage Pad (Upper) ARC/HRC/ERC
Linear Line.
Linear Line www.rollon.com When you move, we move. RollonSrl was set up in 1975 as a manufacturer of linear motion components. Today Rollon group is a leading name in the design, production and sale of
ACTUATORLINE SC series
ACTUATORLINE SC series www.rollon.com Contents Series Overview 1 The Components 2 The Linear Motion System 3 Main Technical Characteristics 4 SC 65 SP 6 SC 130 SP 7 SC 160 SP 8 Transmission Options: 9
Max. particle size 5 µm. Pressure for determining piston forces Repetitive precision. Polyurethane
Piston rod cylinders Guide cylinders 1 Ambient temperature min./max. +0 C / +60 C edium Compressed air ax. particle size 5 µm Oil content of compressed air 0 mg/m³ - 1 mg/m³ Pressure for determining piston
Linear Guideway. Forniture per l Industria Gelmini S.r.l.
Linear Guideway Forniture per l Industria Gelmini S.r.l. Sede Via Cerati, 3/A 43126 Parma Tel. 0521.993844 Fax 0521.291688 Filiale Via Tiziano, 11 46040 Z.I. Guidizzolo (MN) Tel. 0376.847123 Fax 0376.840319
R310EN 2211 ( ) The Drive & Control Company
eline Ball Rail Systems R310EN 2211 (2006.04) The Drive & Control Company Bosch Rexroth AG Linear Motion and Assembly Technologies Ball Rail Systems Roller Rail Systems Linear Bushings and Shafts Ball
12.5 Ball Chain Type, SME Series
12.5 Ball Chain Type, SME Series A. Construction Carriage End Cap End Seal Grease Nipple Inner Seal Ball Bottom Seal Ball Chain 45 Rail 45 B. Characteristics The ball chain type linear guideway, SME series,
T-Series Ball Profile Rail TECHNICAL BULLETIN
T-Series Ball Profile Rail TECHNICAL BULLETIN T-Series Profile Rail Industry standard dimensions Low cost installation no need for high precision base mounts Approximately 5 times more forgiving than all
Courtesy of CMA/Flodyne/Hydradyne Motion Control Hydraulic Pneumatic Electrical Mechanical (800)
01_1 Miniature st Headline_36 Ball Rail pt/14.4 Systems mm second line 2 Linear Motion and Assembly Technologies Miniature Ball Rail Systems Ball Rail Systems Roller Rail Systems Linear Bushings and Shafts
Ball. Ball cage. Fig.1 Structure of Caged Ball LM Guide Actuator Model SKR
Caged all LM Guide Actuator Model Inner block all screw shaft Grease nipple Outer rail all cage all Structure and Features Fig.1 Structure of Caged all LM Guide Actuator Model Caged all LM Guide Actuator
2. HG Series Linear Guideway Four-row Super Heavy Load
16 2. HG Series Linear Guideway Four-row Super Heavy Load 2-1 Features of the HG Series Linear Guideway 2-2 Construction of HG Series Block Cap End cap End seal (Double seals and scraper) Rail Grease nipple
LINEAR BEARINGS & HOUSINGS
LINEAR BEARINGS & HOUSINGS www.euro-bearings.com Tel. 01908 511733 email: sales@euro-bearings.com GENERAL INFORMATION Introduction Ball bushings are anti-friction bearings for linear motion. They offer
Series 63 ISO cylinders
Series 63 ISO 15552 cylinders New versions Single and double-acting, magnetic, cushioned ø 32, 40, 50, 63, 80, 100, 125 mm In compliance with the ISO 15552 standard Weight reduced by 25% Low noise More
Double acting, cushioned, magnetic Ø mm
CATALOGUE > Release 8.7 > Series 40 cylinders Series 40 cylinders Double acting, cushioned, magnetic 60-200 - 250-320 mm In compliance with ISO 5552 standards and with the previous DIN/ISO 643 - VDMA 24562
LM Guide Radial Type Model SR
LM Guide Radial Type Model Endplate LM block Grease nipple End seal LM rail 90 Ball Retainer plate Side seal (Optional) Cross section 30 Point of Selection A Point of Design Options Model No. Precautions
TELESCOPIC RAIL.
TEESCOPIC RAI www.rollon.com About Rollon Development of global business Continual expansion and optimization of the portfolio 1975 Parent company, Rollon S.r.l., founded in Italy 1991 Founding of Rollon
Series 31 compact cylinders 1/
Series 3 compact cylinders Double and single-acting, double-acting non-rotating, magnetic ø2, 6, 20, 25 mm ø 32, 40, 50, 63, 80, 00 mm UNITOP The compact dimensions allow Series 3 single and double-acting
Series 6PF Positioning Feedback cylinders 1/ Double-acting low friction, magnetic ø 50, 63, 80, 100, 125 mm
CATALOGUE > Release 8.8 > Series 6PF cylinders Series 6PF Positioning Feedback cylinders Double-acting low friction, magnetic ø 50, 63, 80, 00, 25 mm»» In compliance with ISO 5552 standards and with the
12.4 Miniature Type, MSC MSD Stainless Steel Series
12.4 Miniature Type, MSC MSD Stainless Steel Series A. Construction Carriage End Cap MSC Standard Type End Seal Rail MSD Wide Type Ball Retainer Bottom Seal 45 45 B. Characteristics MSC st ows with Gothic-arch
Compact cylinders series NYD Double acting with magnetic piston, ISO M5 to G1/8 Piston Ø 20 to 100 mm
Compact cylinders series NYD Double acting with magnetic piston, ISO 21287 M5 to G1/8 Piston Ø 20 to 100 mm 200, 210 220 600, 610 620 Order code NYD-032-125-210 High force cylinder series NYDK and multiple
Actuator System Line. Product Overview English.
Actuator System Line Product Overview English When you move. We move Rollon S.p.A. was founded in 1975 as a manufacturer of linear motion components. Today Rollon group is a leading name in the design,
HSR(Ct Grade) Cost effective Type (Ct Grade) of LM Guide Debuts STOCK DISPONIBLE ENTREGA INMEDIATA
Cost effective Type (Ct Grade) of L Guide Debuts A cost effective series of the well-established model HSR has been newly added. Optimal for the general linear guide market such as for conveyance systems!
The Classification Chart of PMI Linear Guideways
1 The Characteristics of MI s The Classification Chart of MI s 2 (1) igh positioning accuracy, high repeatability The MI linear guideway is a design of rolling motion with a low friction coefficient, and
1. Product overview Basic-Line-Module AXN Product description Basic-Line-Module AXN 4-5. Guide system Roller guide 6 Drive system Gear belt 7
Directory Page 1. Product overview Basic-Line-Module AXN 3 2. Product description Basic-Line-Module AXN 4-5 Guide system Roller guide 6 Drive system Gear belt 7 3. Basic-Line-Modul AXN 45-Z 8-9 AXN 65-Z
Linear Guideways HG Series
18 G99TE1-67 Linear Guideways 2-1 - Heavy Load Ball Type Linear Guideway HG series linear guideways are designed with load capacity and rigidity higher than other similar products with circular-arc groove
2-1 HG Series - Heavy Load Ball Type Linear Guideway
2 G99TE15-114 Linear Guideways 2-1 - Heavy Load Ball Type Linear Guideway HG series linear guideways are designed with load capacity and rigidity higher than other similar products with circular-arc groove
Cross Roller Guide/Ball Guide General Catalog
General Catalog A Product Descriptions Features and Types... A7-2 Features of the.. A7-2 Structure and Features... A7-2 Types of the.. A7-3 Types and Features... A7-3 Point of Selection... A7-4 Rated Load
Miniature Ball Rail Systems
R310EN 2210 (2004.06) The Drive & Control Company 2 Bosch Rexroth AG Linear Motion and Assembly Technologies Miniature-BRS R310EN 2210 (2004.06) Linear Motion Systems Ball Rail System Standard Ball Rail
P1X Series. Compact Rodless Air Cylinders Contents
Compact DL RC P1Z P1X OSP-P Contents Features and Benefits... 130 Ordering Information... 131 Specifications, Weights and Forces... 132 Technical Data... 133-136 Sensor Adapter Bracket... 137 Basic Dimensions...
Берг АБ Тел. (495) , факс (495)
AUTOMATION Linear- and Rotary Modules Table of Contents 1 Product Overview............................................. 4 1.1 Selection of the Linear Modules................................. 8 1.2 Selection
Table of Contents. Precision Ground Ball Screw. Linear Guides. Nomenclature... Page I-51. Nomenclature... Page I-1
Table of Contents Linear Guides Nomenclature... Page I-1 Applications... Page I-1 Product Selection Tips... Page I-2 Interchange... Page I-3 Types... Page I-5 LH Series Nomenclature... Page I-7 AL, AN,
Tie-rod Cylinders, ISO 6431, ISO compliant Series 60
Tie-rod Cylinders, ISO 6431, ISO 15552 compliant Series 60 Single or double-acting, magnetic, cushioned Standard and low friction versions ø 32, 40, 50, 63, 80, 100, 125 mm In compliance with ISO 15552
Aluminium profile. Double-acting, magnetic, cushioned ø 32, 40, 50, 63, 80, 100 mm
> Cylinders Series 62 CATALOGUE > Release 8.5 Cylinders Series 62 Aluminium profile Double-acting, magnetic, cushioned ø 32, 40, 50, 63, 80, 00 mm»» In compliance with ISO 5552 standards and with the previous
504E. LM Guide Actuator General Catalog
LM Guide Actuator General Catalog A LM Guide Actuator General Catalog A Product Descriptions 504E Caged Ball LM Guide Actuator Model SKR.. A2-4 Structure and Features... A2-4 Caged Ball Technology... A2-6
Stelron PS Indexer. PS Series Parallel Shaft Indexer
Stelron PS Indexer PS Series Parallel Shaft Indexer PS INTRODUCTION INTRODUCTION: The recent introduction of the PS series index drives confirms STELRON s continuing commitment to the design & manufacture
Tie rod cylinders, Series 523
Electric Drives and Controls Hydralics Linear Motion and Assembly Technologies Pneumatics Service Tie rod cylinders, Series 523 Technical data Tie rod cylinders, Series 523 Grey series, 32 25 mm ( /4"-5")
2. COMPACT CYLINDERS series STRONG (RS, RQ)
2. COMPACT CYLINDERS series STRONG (RS, RQ) A new series of compact cylinders for long s and heavy-duty applications standard supplied with oversized guides and rods, the first one with adjustable pneumatic
Single- and double-acting, cushioned, magnetic ø 32, 40, 50, 63, 80, 100 and 125 mm
> Series 90 stainless steel cylinders CATALOGUE > Release 8.8 Series 90 stainless steel cylinders Single- and double-acting, cushioned, magnetic ø 32, 40, 50, 63, 80, 00 and 25 mm» In compliance with ISO
M/1000, Heavy Duty Cylinders Double Acting
> > Ø 2 to 12 (50 to 305 mm) > > Extremely rugged heavy duty construction - ideal for use in the most arduous conditions. > > Large range of bore sizes - ideal for a wide variety of industrial applications.
Large Bore Extruded Cylinders, ISO 6431 Series 41
Large Bore Extruded Cylinders, ISO 6431 Series 41 Double-acting cushioned, magnetic ø160-200 (DIN/ISO 6431)»» DIN/ISO 6431 VDMA 24562»» Rolled stainless steel rod»» Adjustable cushioning Cylinders Series
LINEAR RAIL BALL CHAIN TYPE
LINEAR RAIL BALL CAIN TYPE Svanemærket tryksag 54-73 INDEX Index Product overview... 4-5 Dimension table RC/ERC... 6-7 Dimension table RC... 8-9 Dimension table ARC... 0-3 Dimension table & Grease... 4
Ball Rail Systems RE / The Drive & Control Company
Ball Rail Systems RE 82 202/2002-12 The Drive & Control Company Rexroth Linear Motion Technology Ball Rail Systems Roller Rail Systems Standard Ball Rail Systems Super Ball Rail Systems Ball Rail Systems
Crossed Roller Slides
Crossed Roller Slides ov-crossed-slides-divider - Updated - 18-09-2017 165 Linear Linear Rail Sets Overview Standard cross roller rail sets L1000 & L1001 Seven rail profiles (Sizes 1-12) Lengts: 20mm to
Contents. Page. 1. Product description. 2. The AXC line of linear axes. 3. AXLT line of linear tables. AXC and AXS product overview...
SNR Industry Contents Page 3 1. Product description AXC and AXS product overview... 6-8 Dynamic load ratings of the linear motion systems... 9 Compact modules... 10-11 Linear tables... 12 Telescopic axes...
Linear Guides Series OSP-P
Linear Guides Series OSP-P NEW Contents Description Page Overview 31-32 Plain bearing guide SLIDELINE 33-34 Roller guide POWERSLIDE 35-38 Aluminium roller guide PROLINE 39-40 Recirculating ball bearing
UNILINE www.motiontech.com.au bout Rollon Development of global business Continual expansion and optimization of the portfolio 1975 Parent company, Rollon S.r.l., founded in Italy 1991 Founding of Rollon
Inner block. Grease nipple. Fig.1 Structure of LM Guide Actuator Model KR
LM Guide ctuator Model LM Guide + all Screw = Integral-structure ctuator Stopper Housing all screw Inner block Grease nipple Outer rail earing (supported side) Housing Stopper Double-row ball circuit earing
STANDARDISED MOUNTINGS
STNDRDISED MOUNTINGS for PES / PLS cylinders conforming to ISO 15552-FNOR-DIN standard Series 434 MOUNTINGS CONFORMING TO ISO 15552 - FNOR NF ISO 15552 - DIN ISO 15552 STNDRDS B C pplications duty Construction
LINEAR UNITS CT & MT
LINEAR UNITS CT & MT Every care has been taken to ensure the accuracy of the information contained in this catalogue, but no liability can be accepted for any errors or omissions. We reserve the right
Caged Roller LM Guide
Caged Roller LM Guide SRG/SRN Ultra-high Rigidity Long-term Maintenance-free Operation Smooth Motion Wide Array of Options For details, visit THK at www.thk.com Product information is updated regularly
Linear Guideways MG Series
52 2-3 - Miniature Linear Guideway 2-3-1 Features of MGN Series 1. Tiny and light weight, suitable for miniature equipment. 2. All materials in special grade of stainless steel for anti-corrosion size