ACTUATORLINE SC series

Size: px
Start display at page:

Download "ACTUATORLINE SC series"

Transcription

1 ACTUATORLINE SC series

2 Contents Series Overview 1 The Components 2 The Linear Motion System 3 Main Technical Characteristics 4 SC 65 SP 6 SC 130 SP 7 SC 160 SP 8 Transmission Options: 9 Planetary Gearbox 10 Right Angle Transmission Gearbox 11 Simple Shafts 12 Simple Shafts for Encoder Assembly 12 Hollow Shafts 13 Assembly and Accessories 14 Lubrication 15 Protection 16 Multi-Axis Systems 17 Additional Technical Data 19 Part Numbering 20 Data Sheet 21

3 1 Series Overview SC Series The SC series has been designed for use mainly as a vertical axis unit, taking advantage of the fact that the drive is fitted directly inside of the carriage (eliminating movement of the cables) and with the extruded body as the only mobile part.

4 The Components 2 Extruded Bodies The aluminium extrusions used for the SC series are designed and manufactured in cooperation with a leading company in this field to obtain the right combination of high mechanical strength and reduced weight. Aluminium alloy 6060 is used (see page 19 for further information). The dimensional tolerances comply with UNI 3879 standards. T-slots are provided for fast, hassle-free mounting of accessories (proximity switch runner, etc.). Power cables, air hoses, and other elongated accessories can be passed through the aluminum extrusion by means of the unit s cable slot. Threaded holes are provided at one end of the extrusion for mounting of robot gripper mechanisms and EOA (End-of- Arm) tooling. Driving Belt The SC actuator uses steel reinforced polyurethane drive belts with AT type pitch and parabolic profiles. This type of belt is ideal because of its high load transmission characteristics, compact size and low noise. Used in conjunction with a backlash-free pulley, smooth alternating motion can be achieved. Optimization of the maximum belt width-to-body dimension ratio enables the following performance characteristics to be achieved: High speed Low noise Low wear Long life Carriage The carriage is an enveloping structure that houses the entire linear motion system. The carriage consists of a drive pulley and two driven pulleys. The external parts are made of anodized aluminium. Dimensions vary according to the actuator s size. One of the three set-ups shown on pages 17 & 18 can be used for fast, simple assembly of the SC series. For added protection, the carriage is also fitted with specific seals (brushes).

5 3 The Linear Motion System The linear motion system has been designed to meet high load, high speed, and maximum acceleration conditions. The SC series features the following linear motion system: SC series with ball bearing guides Two ball bearing guides with high load capacities are mounted onto two seats on the outer sides of the aluminium body. The carriage of the linear unit is assembled on four preloaded ball bearing blocks with engineered polymer retention cages. The linear motion system described here offers: High speed and acceleration High load capacity High permissible bending moments Low friction Long life Low noise Maintenance free The four-ball row configuration enables the carriage to withstand equal loading evenly in the radial (normal) and lateral (transverse) directions. The four blocks have seals on both ends and, when necessary, an additional scraper can be fitted for very dirty or contaminated conditions. Lubrication reservoirs (pockets) installed on the front of the ball bearing blocks supply the right amount of lubricant, promoting maintenance-free operation.

6 Main Technical Characteristics 4 SC 65 SP Profile dimensions: 65 x 65 mm SC 130 SP Profile dimensions: 70 x 130 mm SC 160 SP Profile dimensions: 90 x 160 mm

7 5 Main Technical Characteristics The sectioned drawings on the previous page showing the main characteristics help guide the process of an initial actuator size selection. For a final selection, refer to the data and dimensions indicated in the pages listed at the end of each table. Type Max. permissible load radial (F z ) stat [N] lateral (F y ) load * 1 dyn [N] Max. permissible axial load (F x ) [N] Max. speed [m/s] Max. acceleration [m/s 2 ] Max. positioning repeatibility [mm] SC 65 SP SC 130 SP SC 160 SP * Reasonable operating life and system rigidity can be obtained from the values given. These values do not relate to the theoretical maximum permitted load capacity of the linear motion system. See page The load capacity of the SC series depends on the linear motion system used and may vary according to the loading direction: radial or lateral. The maximum load in an axial direction depends on the type of driving belt used. The maximum recommended values for the radial load (Fz) and the lateral load (Fy) indicated above incorporate a substantial factor of safety to ensure long life cycles. Experience shows that these values ensure safe static loading and adequate life for most applications. For special conditions (such as high shocks, vibrations, dusty environments, acceleration forces and high bending moments, etc), contact Rollon for further technical advice. Maximum permissible values for speed, acceleration and positioning repeatability can be decreased in the presence of high loads. Fx (axial) Fz (radial) Fy (lateral)

8 SC 65 SP 6 SC 65 SP Technical Data SC 65 SP Min. useful stroke length [mm] 100 Max. useful stroke length [mm] 1600 Max. positioning repeatability [mm] * 0.05 Max. speed [m/s] 5.0 Max. acceleration [m/s 2 ] 50 Type of belt 32 AT 10 Type of pulley Ø 51 - Z 32 - Zero play Carriage displacement per pulley turn [mm] 160 Carriage weight [kg] 7.8 Zero travel weight [kg] 11.6 Weight for 100 mm useful stroke [kg] 0.7 * The positioning repeatability depends upon the type of transmission used. SC 65 SP Theoretical and maximum permissible loads Theoretical Permissible* stat. dyn. stat. dyn. Fx [N] Fy [N] Fz [N] Mx [Nm] My [Nm] Mz [Nm] * Reasonable operating life and system rigidity can be obtained from the values given. Fx (axial) Fy (lateral) Fz (radial) SC 65 SP dimensions L = USEFUL STROKE + SAFETY*** Hollow shaft version flange Standard flange Prox switch target runner Key slots provided for standard mounting cleats Threaded holes M12x1.25 for prox switch mtg Protection brushes Lubrication fitting *** The length of the safety stroke is provided on request according to the user s specific requirements.

9 7 SC 130 SP SC 130 SP Technical Data SC 130 SP Min. useful stroke length [mm] 100 Max. useful stroke length [mm] 2000 Max. positioning repeatability [mm] * 0.05 Max. speed [m/s] 5.0 Max. acceleration [m/s 2 ] 50 Type of belt 50 AT 10 Type of pulley Ø 64 - Z 20 - Zero play Carriage displacement per pulley turn [mm] 200 Carriage weight [kg] 13.5 Zero travel weight [kg] 23 Weight for 100 mm useful stroke [kg] 1.4 * The positioning repeatability depends upon the type of transmission used. SC 130 SP Theoretical and maximum permissible loads Theoretical Permissible* stat. dyn. stat. dyn. F [N] Fy [N] Fz [N] Mx [Nm] My [Nm] Mz [Nm] * Reasonable operating life and system rigidity can be obtained from the values given. Fx (axial) Fy (lateral) Fz (radial) SC 130 SP dimensions L = USEFUL STROKE + SAFETY*** Hollow shaft version flange Standard flange Proximity switch target Threaded holes M12x1.25 for proximity Key slots for mounting cleats Protection brushes Lubrication fitting 4 threaded holes provided for End-of-Arm tooling (both ends) Aluminium profile M10 Threaded holes M8 Wiring slot End Plate *** The length of the safety stroke is provided on request according to the user s specific requirements.

10 SC 160 SP 8 SC 160 SP Technical Data SC 160 SP Min. useful stroke length [mm] 100 Max. useful stroke length [mm] 2500 Max. positioning repeatability [mm] * 0.05 Max. speed [m/s] 5.0 Max. acceleration [m/s 2 ] 50 Type of belt 70 AT 10 Type of pulley Ø 80 - Z 25 - Zero play Carriage displacement per pulley turn [mm] 250 Carriage weight [kg] 32 Zero travel weight [kg] 48 Weight for 100 mm useful stroke [kg] 1.9 * The positioning repeatability depends upon the type of transmission used. SC 160 SP Theoretical and maximum permissible loads Theoretical Permissible* stat. dyn. stat. dyn. Fx [N] Fy [N] Fz [N] Mx [Nm] My [Nm] Mz [Nm] * Reasonable operating life and system rigidity can be obtained from the values given. Fx (axial) Fy (lateral) Fz (radial) SC 160 SP dimensions L = USEFUL STROKE + SAFETY*** Hollow shaft flange version Standard flange Proximity switch target Threaded holes M12x1.25 for proximity Hollow for brackets fit ting Protection brushes Lubrication fitting 4 threaded holes provided for Endof-Arm tooling (both ends) Aluminium profile Threaded holes Clearance holes Wiring slot End Plate *** The length of the safety stroke is provided on request according to the user s specific requirements.

11 9 Transmission Features The SC series can be fitted as standard with different types of movement transmissions: Planetary gears Right angle transmission gears Versions with simple shaft Versions with hollow shaft Versions with planetary gears Planetary gears are used for highly dynamic robotic, automation, and handling applications requiring high torque or frequent reversing and are capable of high level precision requirements. Standard models are available with backlash from 8 to 20 and with a reduction ratio from 3:1 to 1000:1. For assembly of nonstandard planetary gears, contact Rollon. Versions with right angle transmission gears Standard models are available with 5:1 to 150:1 transmission ratio. Versions with simple or hollow shafts If the linear units are not supplied directly with reduction units and the customer intends to use a different solution, the units can be equipped with simple or hollow shafts of different diameters. Transmission of torque to the drive pulley For versions equipped with reduction units or with a simple shaft, the drive pulley is coupled using a tapered spline. This system ensures long-lasting, high level precision, particularly for the case of high torque values and frequent reversals of motion. Only tab type coupling is available in the hollow shaft version. This system could result in backlash, especially in the case of high torque values. For further information, contact Rollon.

12 Planetary Gearbox 10 Assembly to the right or to the left of the driving head Unit: mm H (1 stage) H (2 stage) H (3 stage) D2 D3 Applicable to unit EPL ~145 SC 65 SP EPL ~165 SC 130 SP EPL ~215 SC 160 SP

13 11 Right Angle Transmission Gearbox Version with motor coupling perpendicular to the linear unit Version with motor coupling parallel to the linear unit Reduction unit assembly to the right or to the left of the driving head. Unit: mm SC SP C Dmax F1 F2 F3 Applicable to unit DL-PH SC 65 SP DL-PH SC 130 SP / SC 160 SP

14 Simple Shafts 12 Versions with Simple Shaft AS type simple shaft Left hand mount Right hand mount The position of the simple shaft can be to the right or to the left of the driving head. Units: mm B D1 Appliable to unit AS h7 SC 65 AS h7 SC 130/160 AE 10 type simple shaft for encoder assembly

15 13 Hollow Shafts Versions with Hollow Shaft AC hollow shaft type AS BxH Unit: mm D1 D2 D3 A C E F Keyway B x H Appliable to unit AC19 19h M6x1.0-6H x 15 DP 6 x 6 SC 65 SP AC20 20h M6x1.0-6H x 15 DP 6 x 6 SC 65 SP AC20 20h M6x1.0-6H x 15 DP 6 x 6 SC 130 SP AC25 25h M8x1.0-6H x 19 DP 8 x 7 SC 130 SP AC32 32h M10x1.5-6H x 24.5 DP 10 x 8 SC 160 SP An (optional) connection flange may be required to fit the standard reduction units selected by Rollon. For further informations, contact Rollon.

16 Assembly and Accessories 14 The recirculating ball linear guides used in the SC series have equal load capacities in any direction. Therefore, the units can be installed in any orientation, even upside down, without any loss of load capacity or structural integrity. To install the SC units, we recommend using one of the two systems indicated below: Mounting by fixing brackets Unit: mm SC 65 SC 130 SC 160 A Mounting bracket F A 0D1 L A B C E F D1 D2 H1 L SC 65 SP SC 130 SP E SC 160 SP H1 0D2 B C Material: Anodized aluminium Direct mounting

17 15 Assembly and Accessories Fitting of the proximity switch Four threaded holes for the fitting of the proximity switches are provided on the sides of the carriage. When fitting the switches, be careful not to overtorque the switches in order to avoid damage to the sensor target. Promixity switch runner The zinc-coated, L-shaped section is fitted in the specific slot of the body and used to trip the proximity switch. SC SP series Switch target or runner Barrel-type proximity switch RT-nuts Steel nuts to be used in the T-slots of the body. Dimensions Unit: mm Slot D3 D4 G H2 K SC 65 L 6.7 M SC 130 L-I 8 M SC 160 I 8 M SC 160 L 11 M L = Side I = Lower Lubrication SP linear units with ball bearing guides The SP versions are fitted with maintenance-free ball bearing guides. The carriages are equipped with polymer retention cages to avoid steel-steel contact between adjacent rotating elements and to reduce misalignment of these in the ball circuits. The cage also eliminates friction between the ball bearings, therefore, reducing wear. Lubrication reservoirs (pockets) installed on the ball bearing blocks release the right amount of lubricant to the areas where the loads are applied to the balls, thus promoting maintenance-free operation. Contact Rollon for the necessary analysis with high cyclic action and heavy loads.

18 Protection 16 Standard Protection Protection of the Ball Bearing Guides The blocks of the ball bearing guides are fitted with seals on both ends and, when necessary, an additional scraper can be fitted for very dusty conditions. Protection Using Brushes The carriages of the linear units are fitted with brush type seals on both ends to prevent penetration of impurities. Special Protection To use these linear units in very critical conditions, they can be fitted with a bellows system in addition to the standard protection. The bellows is fixed to the carriage and the ends of the linear unit by means of Velcro tape for easy assembly and disassembly and any replacements. The total length (L) of the linear unit will vary: add twice the length of the closed bellows package. L = 2D + E + 2(Pch+5) + useful stroke Dimensions A B C D E T for P A = 1000 SC SC SC P CH = Closed package length P A = Open package length T = Fold depth Materials on demand: Nylon coated with PVC, fiberglass, stainless steel. Standard material: Thermally welded nylon coated with polyurethane.

19 17 Multi-Axis System Previously, customers wishing to build multi-axis units have had to design, draw and manufacture all the elements necessary to assemble two or more axes. Rollon now offers the accessory mounting brackets and hardware necessary to configure the multi-axis units. The SC series is also pre-engineered to facilitate direct connection with the units of the ROBOT series. In addition to standard elements, Rollon also provides plates for special applications. Application examples One axis X system A - X axis: 1 SC 65 A Two axis system X-Z B - Linear units: - X axis: 1 ROBOT 130 SP - Y axis: 1 SC 65 Connection parts: The SC 65 unit is directly assembled onto the ROBOT 130 SP without further elements. Please see our ROBOT Series catalog. B

20 Multi-Axis System 18 C - Linear units: - X axis: 2 ELM 80 SP - Y axis: 1 ROBOT 160 SP - Z axis: 1 SC 130 Connection parts: 2 fixing bracket kits for ROBOT 160 SP onto the carriages of ELM 80 SP. The SC 130 unit is directly assembled onto the ROBOT 160 SP unit without further elements.* Please see our ELM Series and ROBOT Series catalog. Three axis system X-Y-Z G C P C *must-be ordered as a super-product. Three axis system X-Y-Z D - Linear units: - X axis: 1 ROBOT 160 SP - Y axis: 1 ROBOT 130 SP - Z axis: SC 65 Connection parts: 1 fixing bracket kit for ROBOT 130 SP onto the carriages of ROBOT 220 SP unit. The SC 65 unit is directly assembled onto the ROBOT 130 SP unit without further elements. Please see our ROBOT Series catalog. D

21 19 Additional Technical Data General data about the aluminium used: Chemical composition [%] Al Mg Si Fe Mn Zn Cu Impurities Remainder Physical characteristics Density Young s modulus Thermal expansion coeff. ( C) g cm 3 GPa 10-6 K Thermal conductivity (20 C) W m. K Specific heat (0-100 C) J kg. K Resistivity Melting point Ω. m C Mechanical properties UTS YS e BHN MPa MPa % Moments of inertia of the aluminium body I x [10 7 mm 4 ] I y [10 7 mm 4 ] I xy [10 7 mm 4 ] SC SC SC Weight [kg/m] SC SC SC Driving Belt: The driving belt is manufactured from low friction polyurethane elastomer reinforced with high tensile strength steel wire. Type of belt Belt width [mm] Specific strenght for tooth F USP [N/cm] Max. permissible tensile stress F[N] Specific elastic load C SP [N] Weight kg/m SC 65 AT * SC 130 AT * SC 160 AT * For the resistance against chemicals of the sealing strip and of the driving belt contact Rollon.

22 Part Numbering 20 Identification code for the linear actuators To identify the linear actuators, we recommend the code as follows: S 13 1CA A XXX SC Series Linear unit size (i.e. 13 = 130) Drive head type (1CA = AS20 on right) Special options (Reserved for Rollon use) Profile type (1A = standard version) Total length of linear actuator For assistance in creating a part number please quotes@rolloncorp.com or contact us at

23 21 Data The components Sheet Photocopy and send the sheet below to: ROLLON Corp. 101 Bilby Road, Suite B, Hackettstown NJ Tel.: (973) Fax: (908) General data: Company: Address: Phone: Date: Inquiry N o : Contact: City/Zip/Postal Code: Country: Fax: Technical data: Select unit: metric standard X axis Y axis Z axis Useful stroke (Including safety overtravel) S [mm or in] Load to be moved P [kg or lbm] Location of load P center of gravity from centerline of actuator carriage and actuator body (see Fig. 1 on next page) Direction X L x P [mm] Direction Y L yp [mm or in] Direction Z L zp [mm or in] Additional forces Direction (+/-) F x (F y, F z ) [N or lbf] Position of forces Direction X L x F x (F y, F z ) [mm or in] Orientation (choose orientation type number from Figure 1 on next page and indicate degrees if Type 5) Direction Y L y F x (F y, F z ) [mm or in] Direction Z L z F x (F y, F z ) [mm or in] Max. velocity v [m/s or in/s] Max. acceleration a [m/s 2 or in/ s 2] Positioning accuracy ΔS [mm or in] Positioning repeatability (+/-) ΔR [mm or in] Travel accuracy - straightness (+/-) Travel accuracy - flatness (+/-) [mm or in] [mm or in] Required life L h or L 10 [hours, years or km] Operating Temperature Range ( C, F) Duty Cycle Duration (i.e. 24/7) [cycles per second, minutes, hours] Quantity Part Number Application type: Retrofit: Yes No New Design: Yes No Operating Environment: Clean Moderate Contamination Severe Contamination Corrosive Figure 1 details on next page Quote needed by: Order needed by: Solutions Engineer: Sales Agent: ATTENTION: Please attach any drawings, sketches, motion profiles, and duty cycle data that is available for your application. All the drawings in this catalog are available in CAD files on Consult Rollon if you do not find the CAD file you are seeking. An interactive data sheet form can be found at

24 Data Sheet 22 Figure 1 Positions Fx LzP LxP Fz P Fy LyP Horizontal position Horizontal position Carriage up Carriage up Type 1 Carriage down Carriage down Type 2 Transverse position Transverse position Type 3 Vertical position Vertical position Angular position Specify angle α and carriage position as viewed from behind drive end: U, D, R, L (U as shown) Type 4 Type 5 Additional Notes

25 23 Notes

26 ROLLON S.r.l. Via Trieste 26 I Vimercate (MB) Phone: (+39) Fax: (+39) infocom@rollon.it Italy ROLLON GmbH ROLLON Corporation Bonner Straße Bilby Road. Suite B D Düsseldorf Hackettstown, NJ Phone: +49 (0) Phone: +1 (973) Fax: +49 (0) Fax: +1 (908) Germany info@rollon.de USA info@rolloncorp.com ROLLON S.A.R.L. ROLLON B.V. Les Jardins d Eole, 2 allée des Séquoias Ringbaan Zuid 8 F Limonest NL-6905 DB Zevenaar Phone: (+33) (0) Phone: (+31) France Fax: (+33) (0) infocom@rollon.fr Netherlands Fax: (+31) info@rollon.nl Gli indirizzi aggiornati dei nostri partner commerciali sitrovano all indirizzo All addresses of our global sales partners can alsobe found on the internet at Salvo errori e variazioni. Testi e illustrazioni possono essere utilizzati solo previa autorizzazione da parte nostra. - Change s and errors excepted. The text and images may be used only with our permission. RL_SC_IT-UK_01/12 INTERNATIONAL

ACTUATORLINE ELM series

ACTUATORLINE ELM series ACTUATORLINE ELM series www.rolloncorp.com www.motiontech.com.au Contents Series Overview 1 The Components 2 The Linear Motion System 3 Main Technical Characteristics 4 ELM 50 SP 6 ELM 65 SP 7 ELM 80 SP

More information

Clean Room System www.motiontech.com.au Linear units ONE series INTL. PATENT PENDING 1 ONE series ONE series ONE series description Fig. 1 The ONE series actuators are belt driven linear actuators specifi

More information

Mono Rail +

Mono Rail + Mono + www.rollon.com Content Mono + Technical features overview 1 Product explanation Profile rails for the highest degree of precision 2 Technical data Performance characteristics and notes Load capacities

More information

Any reproduction, even partial, is allowed only by written permission by Rollco.

Any reproduction, even partial, is allowed only by written permission by Rollco. LINEAR UNIT E-SMART Every care has been taken to ensure the accuracy of the information contained in this catalogue, but no liability can be accepted for any errors or omissions. We reserve the right to

More information

CURVILINE.

CURVILINE. CURVILINE www.rollon.com About Rollon Development of global business Continual expansion and optimization of the portfolio 1975 Parent company, Rollon S.r.l., founded in Italy 1991 Founding of Rollon GmbH

More information

A LEADING MANUFACTURER IN LINEAR MOTION GERALD SUMMERS is now an authorised distributor of Rollon TEL: 0800 055 6663 E-MAIL: SALES@GERALD-SUMMERS.CO.UK WWW.GERALD-SUMMERS.CO.UK MINIATURE MONO RAIL www.rollon.com

More information

Actuator System Line. Product Overview English.

Actuator System Line. Product Overview English. Actuator System Line Product Overview English When you move. We move Rollon S.p.A. was founded in 1975 as a manufacturer of linear motion components. Today Rollon group is a leading name in the design,

More information

A LEADING MANUFACTURER IN LINEAR MOTION GERALD SUMMERS is now an authorised distributor of Rollon TEL: 0800 055 6663 E-MAIL: SALES@GERALD-SUMMERS.CO.UK WWW.GERALD-SUMMERS.CO.UK CURVILINE www.rollon.com

More information

EASY RAIL.

EASY RAIL. EASY RAIL www.rollon.com About Rollon Development of global business Continual expansion and optimization of the portfolio 1975 Parent company, Rollon S.r.l., founded in Italy 1991 Founding of Rollon GmbH

More information

Uniline System FrontespizioUnilineSystem.indd 1 22/11/ :32:41

Uniline System FrontespizioUnilineSystem.indd 1 22/11/ :32:41 Uniline ystem 1 Uniline series Uniline series Uniline series description ig. 1 Uniline is a family of ready-to-install linear actuators. They consist of internal ompact Rail roller sliders and steel-reinforced

More information

Actuator Line. General catalogue English. Part 1

Actuator Line. General catalogue English.   Part 1 ctuator Line Part 1 General catalogue English www.rollon.com When you move. We move Rollon.p.. was founded in 1975 as a manufacturer of linear motion components. Today Rollon group is a leading name in

More information

Linear Drive with Toothed Belt and Integrated Guide with Recirculating Ball Bearing Guide with Roller Guide Series OSP-E..BHD

Linear Drive with Toothed Belt and Integrated Guide with Recirculating Ball Bearing Guide with Roller Guide Series OSP-E..BHD Linear Drive with and Integrated Guide with Recirculating Ball Bearing Guide with Roller Guide Contents Description Page Overview 11-14 Version with Recirculating Ball Bearing Guide Technical Data 15-17

More information

MTB 42 Belt Driven Linear Actuator

MTB 42 Belt Driven Linear Actuator LINEAR ACTUATOR TECHNOLOGY MT Series MTB Belt Driven Linear Actuator The MT Series offers a number of profile sizes with multiple design configurations to fit almost any application. TECHNICAL DATA features

More information

MT Series MTB 42 BELT DRIVEN LINEAR ACTUATOR

MT Series MTB 42 BELT DRIVEN LINEAR ACTUATOR MT Series MTB BELT DRIVEN LINEAR ACTUATOR LINEAR ACTUATOR TECHNOLOGY The MT Series offers a number of profile sizes with multiple design configurations to fit almost any application. TECHNICAL DATA FEATURES

More information

TELESCOPIC RAIL.

TELESCOPIC RAIL. TEESCOPIC RAI www.rollon.com About Rollon Development of global business Continual expansion and optimization of the portfolio 1975 Parent company, Rollon S.r.l., founded in Italy 1991 Founding of Rollon

More information

ML Series MINIATURE SCREW-DRIVEN LINEAR ACTUATOR LOW COST SOLUTION FOR PRECISION POSITIONING IN COMPACT SPACES!

ML Series MINIATURE SCREW-DRIVEN LINEAR ACTUATOR LOW COST SOLUTION FOR PRECISION POSITIONING IN COMPACT SPACES! ML Series MINIATURE SCREW-DRIVEN LINEAR ACTUATOR Compact and easy to install, a low cost linear solution perfectly suited for the medical industry, life science and small scale automation applications.

More information

Vertical Linear Drive with Toothed Belt and Integrated Recirculating Ball Bearing Guide Series OSP-E..BV

Vertical Linear Drive with Toothed Belt and Integrated Recirculating Ball Bearing Guide Series OSP-E..BV Vertical Linear Drive with and Integrated Recirculating Ball Bearing Guide Series OSP-E..BV Contents Description Page Overview 25-28 Technical Data 29-31 Dimensions 32-33 25 Parker Hannifin Corporation

More information

1. Product overview Basic-Line-Module AXN Product description Basic-Line-Module AXN 4-5. Guide system Roller guide 6 Drive system Gear belt 7

1. Product overview Basic-Line-Module AXN Product description Basic-Line-Module AXN 4-5. Guide system Roller guide 6 Drive system Gear belt 7 Directory Page 1. Product overview Basic-Line-Module AXN 3 2. Product description Basic-Line-Module AXN 4-5 Guide system Roller guide 6 Drive system Gear belt 7 3. Basic-Line-Modul AXN 45-Z 8-9 AXN 65-Z

More information

Miniature Ball Rail Systems

Miniature Ball Rail Systems R310EN 2210 (2004.06) The Drive & Control Company 2 Bosch Rexroth AG Linear Motion and Assembly Technologies Miniature-BRS R310EN 2210 (2004.06) Linear Motion Systems Ball Rail System Standard Ball Rail

More information

Vertical Linear Drive with Toothed Belt and Integrated Recirculating Ball Bearing Guide Series OSP-E..BV

Vertical Linear Drive with Toothed Belt and Integrated Recirculating Ball Bearing Guide Series OSP-E..BV Vertical Linear Drive with and Integrated Recirculating Ball Bearing Guide Series OSP-E..BV Overview...25-28 Technical Data...29-31 Dimensions...32-33 25 Features TOOTHED BELT DRIVE FOR VERTICAL MOVEMENTS

More information

TELESCOPIC RAIL.

TELESCOPIC RAIL. TEESCOPIC RAI www.rollon.com About Rollon Development of global business Continual expansion and optimization of the portfolio 1975 Parent company, Rollon S.r.l., founded in Italy 1991 Founding of Rollon

More information

LINEAR UNITS CT & MT

LINEAR UNITS CT & MT LINEAR UNITS CT & MT Every care has been taken to ensure the accuracy of the information contained in this catalogue, but no liability can be accepted for any errors or omissions. We reserve the right

More information

Vertical Linear Drive with Toothed Belt and Integrated Recirculating Ball Bearing Guide Series OSP-E..BV

Vertical Linear Drive with Toothed Belt and Integrated Recirculating Ball Bearing Guide Series OSP-E..BV Vertical Linear Drive with Toothed Belt and Integrated Recirculating Ball Bearing Guide Series OSP-E..BV Contents Description Page Overview 25-28 Technical Data 29-33 Dimensions 34 Order Instructions 35

More information

Contents. Page. 1. Product description. 2. The AXC line of linear axes. 3. AXLT line of linear tables. AXC and AXS product overview...

Contents. Page. 1. Product description. 2. The AXC line of linear axes. 3. AXLT line of linear tables. AXC and AXS product overview... SNR Industry Contents Page 3 1. Product description AXC and AXS product overview... 6-8 Dynamic load ratings of the linear motion systems... 9 Compact modules... 10-11 Linear tables... 12 Telescopic axes...

More information

Linear Drive with Ball Screw Drive Series OSP-E..SB

Linear Drive with Ball Screw Drive Series OSP-E..SB Linear Drive with Ball Screw Drive Series OSP-E..SB Contents Description Data Sheet No. Page Overview 1.30.001E 47-50 Technical Data 1.30.002E-1 to 5 51-55 Dimensions 1.30.002E-6, -7 56-57 Order instructions

More information

LM SERIES LINEAR MODULE

LM SERIES LINEAR MODULE LM SERIES LINEAR MODULE THE LM RODLESS LINEAR ACTUATOR RACO s LM Linear Modules are lightweight positioning elements, which can be easily configured into a wide variety of multiple axis motion systems.

More information

MONO RAIL.

MONO RAIL. MONO RAIL www.rollon.com About Rollon Development of global business Continual expansion and optimization of the portfolio 1975 Parent company, Rollon S.r.l., founded in Italy 1991 Founding of Rollon GmbH

More information

Compact Modules. with ball screw drive and toothed belt drive R310EN 2602 ( ) The Drive & Control Company

Compact Modules. with ball screw drive and toothed belt drive R310EN 2602 ( ) The Drive & Control Company with ball screw drive and toothed belt drive R310EN 2602 (2007.02) The Drive & Control Company Bosch Rexroth AG Linear Motion and Assembly Technologies Ball Rail Systems Roller Rail Systems Linear Bushings

More information

ELECTRIC ACTUATOR - RODLESS ELEKTRO SK SERIES ACTUATORS

ELECTRIC ACTUATOR - RODLESS ELEKTRO SK SERIES ACTUATORS ELECTRIC ACTUATOR - RODLESS ELEKTRO SK SERIES 1 ELECTRIC AXIS - RODLESS ELEKTRO SK SERIES Electric axis without screw piston rod, with V-Lock interface. The cylinder frame is made of anodized extruded

More information

R310EN 2211 ( ) The Drive & Control Company

R310EN 2211 ( ) The Drive & Control Company eline Ball Rail Systems R310EN 2211 (2006.04) The Drive & Control Company Bosch Rexroth AG Linear Motion and Assembly Technologies Ball Rail Systems Roller Rail Systems Linear Bushings and Shafts Ball

More information

Ball Rail Systems RE / The Drive & Control Company

Ball Rail Systems RE / The Drive & Control Company Ball Rail Systems RE 82 202/2002-12 The Drive & Control Company Rexroth Linear Motion Technology Ball Rail Systems Roller Rail Systems Standard Ball Rail Systems Super Ball Rail Systems Ball Rail Systems

More information

Product overview. 10 Bosch Rexroth Corporation Compact Modules R310A 2602 ( ) Compact Modules CKK. Compact Modules with ball screw drive (CKK)

Product overview. 10 Bosch Rexroth Corporation Compact Modules R310A 2602 ( ) Compact Modules CKK. Compact Modules with ball screw drive (CKK) 10 Bosch Rexroth Corporation R310A 2602 (2008.09) CKK with ball screw drive (CKK) Product overview are precision, ready-to-install linear motion systems characterized by their high performance and compact

More information

A5 BELT-DRIVEN RODLESS ELECTRIC AXIS, SERIES ELEKTRO BK

A5 BELT-DRIVEN RODLESS ELECTRIC AXIS, SERIES ELEKTRO BK BELT-DRIVEN RODLESS ELECTRIC AXIS, SERIES ELEKTRO BK Belt-driven rodless electric axis with a V-Lock interface. The structure features an extremely lightweight yet high-strength anodised aluminium extruded

More information

mechanics LES functional overview LES 4 LES 6 LES 5

mechanics LES functional overview LES 4 LES 6 LES 5 LES functional overview LES 4 with spindle drive Overview 2-54 2-56 LES 6 2-58 with spindle drive LES 5 2-60 with spindle drive Calculations 2-62 Combination examples Motor modules Clutch housing Motor

More information

linear units control in motion

linear units control in motion linear units control in motion by 2 Almotion b.v. Nijverheidsweg 14 6662 NG ELST (Gld.) The Netherlands +31 488 480858 +31 488 481 1 65 info@almotion.nl www.almotion.nl www. lineair.nl www.lineairegeleiding.nl

More information

Courtesy of CMA/Flodyne/Hydradyne Motion Control Hydraulic Pneumatic Electrical Mechanical (800)

Courtesy of CMA/Flodyne/Hydradyne Motion Control Hydraulic Pneumatic Electrical Mechanical (800) 01_1 Miniature st Headline_36 Ball Rail pt/14.4 Systems mm second line 2 Linear Motion and Assembly Technologies Miniature Ball Rail Systems Ball Rail Systems Roller Rail Systems Linear Bushings and Shafts

More information

Linear Drive with Toothed Belt Series OSP-E..B. Contents Description Overview Technical Data Dimensions Order Instructions 46

Linear Drive with Toothed Belt Series OSP-E..B. Contents Description Overview Technical Data Dimensions Order Instructions 46 Linear Drive with Toothed Belt Contents Description Page Overview 35-38 Technical Data 39-43 Dimensions 44-45 Order Instructions 46 35 The System Concept ELECTRIC LINEAR DRIVE FOR POINT-TO-POINT APPLICATIONS

More information

Берг АБ Тел. (495) , факс (495)

Берг АБ Тел. (495) , факс (495) AUTOMATION Linear- and Rotary Modules Table of Contents 1 Product Overview............................................. 4 1.1 Selection of the Linear Modules................................. 8 1.2 Selection

More information

Sizes 50, 65, 80. Accessories for cables fixing. Presence of internal channels for re-lubrication Large range of axis mounting accessories

Sizes 50, 65, 80. Accessories for cables fixing. Presence of internal channels for re-lubrication Large range of axis mounting accessories > Series 5E electromechanical axis C_Electrics > 206 Series 5E electromechanical axis New Sizes 50, 65, 80 Multiposition system with transmission of the movement with toothed belt Suitable for high dynamics

More information

Precision Modules PSK

Precision Modules PSK Precision Modules PSK 2 Bosch Rexroth AG Precision Modules PSK R999000500 (2015-12) Identification system for short product names Short product name Example:: P S K - 050 - N N - 1 System = Precision Module

More information

The new performance class...

The new performance class... The new performance class... 10/2017 EP(X)-II 30/40 EP(X)-II 30/40 twin tube actuator The latest generation of twin tube units Move-Tec EP(X)-II 30/40 Your application takes centre stage slow langsam A

More information

RACK JACK. Synchronous Lifting Systems

RACK JACK. Synchronous Lifting Systems RACK JACK Synchronous Lifting Systems RACK JACK (ROUND RACK TYPE) Operation The Rack Jack from WMH Herion provides simple synchronous lifting motion. The system of rack and pinion transforms linear motion

More information

Sizes 50, 65, 80. Presence of internal channels for re-lubrication Large range of axis mounting accessories

Sizes 50, 65, 80. Presence of internal channels for re-lubrication Large range of axis mounting accessories > Series 5E electromechanical axis C_Electrics > 207 Series 5E electromechanical axis New models Sizes 50, 65, 80 Multiposition system with transmission of the movement with toothed belt Suitable for high

More information

Linear Actuator with Toothed Belt Series OSP-E..B

Linear Actuator with Toothed Belt Series OSP-E..B Linear Actuator with Toothed Belt Series OSP-E..B Contents Description Data Sheet No. Page Overview 1.20.001E 21-24 Technical Data 1.20.002E-1 to 5 25-29 Dimensions 1.20.002E-6 30 Order Instructions 1.20.002E-7

More information

SNR, YOUR GUIDE TO LINEAR MODULES

SNR, YOUR GUIDE TO LINEAR MODULES SNR, YOUR GUIDE TO LINEAR MODULES A bearing manufacturer known across the world For almost a century NTN-SNR has been focusing on the development, design and manufacture of bearings. Today NTN-SNR has

More information

Introduction. Stainless Steel Cover. Removable Carriage Plate. Mounting Platform. Limit Switch & Bracket. Aluminum Beam.

Introduction. Stainless Steel Cover. Removable Carriage Plate. Mounting Platform. Limit Switch & Bracket. Aluminum Beam. Introduction The HepcoMotion SBD is an exceptionally rugged, quiet and precise linear unit. It uses super-smooth Hepco LBG caged linear ball guides having such high load capacity that system life is rarely

More information

LAP4, LAP8. Pneumatic linear drive sizes 4 and 8

LAP4, LAP8. Pneumatic linear drive sizes 4 and 8 Pneumatic linear drive sizes 4 and Torsional and bending resistant profiles T-slots in the outer profile enable individual mounting options Adjustable guiding system (LAP4) Precise linear roller guiding

More information

Easyslide FrontespizioEasyslide.indd 1 21/05/ :26:17

Easyslide FrontespizioEasyslide.indd 1 21/05/ :26:17 Easyslide When you move. We move Rollon S.p.A. was founded in 1975 as a manufacturer of linear motion components. Today Rollon group is a leading name in the design, production, and sale of linear rails,

More information

mechanics LES functional overview LES 4 LES 6 LES 5

mechanics LES functional overview LES 4 LES 6 LES 5 LES functional overview LES 4 Overview B-36 B-38 with spindle drive LES 6 B-40 with spindle drive LES 5 B-42 with spindle drive Combination examples Motor modules Clutch housing Motor leads Installation

More information

UNILINE www.motiontech.com.au bout Rollon Development of global business Continual expansion and optimization of the portfolio 1975 Parent company, Rollon S.r.l., founded in Italy 1991 Founding of Rollon

More information

V SWISS MADE LINEAR TECHNOLOGY

V SWISS MADE LINEAR TECHNOLOGY Compact units Excerpt from main catalogue SWISS MADE LINEAR TECHNOLOGY V 11-15 Line Tech compact units Table of contents Product overview 106 107 Design fundamentals / Lubrication / Maintenance 108 Profile

More information

CKR Compact Modules with Ball Rail Guides and Toothed Belt Drive. The Drive and Control Company

CKR Compact Modules with Ball Rail Guides and Toothed Belt Drive. The Drive and Control Company CKR Compact Modules with Ball Rail Guides and Toothed Belt Drive The Drive and Control Company Bosch Rexroth Corp. Linear Motion and Assembly Technologies CKR RE 8 615 (03.006) Rexroth Linear Motion Technology

More information

Curviline FrontespizioCurviline.indd 1 07/10/ :24:20

Curviline FrontespizioCurviline.indd 1 07/10/ :24:20 Curviline When you move. We move Rollon S.p.A. was founded in 1975 as a manufacturer of linear motion components. Today Rollon group is a leading name in the design, production, and sale of linear rails,

More information

RACK JACK. Synchronous Lifting Systems

RACK JACK. Synchronous Lifting Systems RACK JACK Synchronous Lifting Systems RACK JACK (ROUND RACK TYPE) Operation The Rack Jack from WMH Herion provides simple synchronous lifting motion. The system of rack and pinion transforms linear motion

More information

Linear Actuator with Ball Screw Series OSP-E..S. Contents Description Overview Technical Data Dimensions 89

Linear Actuator with Ball Screw Series OSP-E..S. Contents Description Overview Technical Data Dimensions 89 Linear Actuator with Ball Screw Series OSP-E..S Contents Description Page Overview 79-82 Technical Data 83-88 Dimensions 89 79 The System Concept ELECTRIC LINEAR ACTUATOR FOR HIGH ACCURACY APPLICATIONS

More information

Catalogue. Portal Axes PAS

Catalogue. Portal Axes PAS Catalogue Portal xes PS Portal xes PS Table of Content Product Description............................... 2 Ballscrew axes.................................... Product description.............................

More information

Product Description. Characteristic features R310A 2402 ( ) Linear Modules MLR

Product Description. Characteristic features R310A 2402 ( ) Linear Modules MLR 9 Bosch Rexroth Corporation R310A 40 (1.11) MLR Product Description Characteristic features MLR...: with Cam Roller Guide and Toothed Belt Drive for high-speed applications (up to 10 m/s) with Cam Roller

More information

Hegra Rail.

Hegra Rail. Hegra Rail www.rollon.com When you move. We move Rollon S.p.A. was set up in 1975 as a manufacturer of linear motion components. Today Rollon group is a leading name in the design, production and sale

More information

124

124 124 www.danahermotion.com Linear Units Linear Rod Units VarioLine, Movotrak Linear units with rod Perfect for hydraulics and pneumatics replacement Load up to 40 000 N High accuracy ball screw drive High

More information

ndustr SNR our guide to linear modules

ndustr SNR our guide to linear modules ndustr SNR our guide to linear modules SNR A bearing manufacturer known across the world For almost a century SNR has been focusing on the development, design and manufacture of bearings. Today SNR has

More information

Precision Modules PSK

Precision Modules PSK Precision Modules PSK The Drive & Control Company Rexroth Linear Motion Technology Ball Rail Systems Roller Rail Systems Standard Ball Rail Systems Super Ball Rail Systems Ball Rail Systems with Aluminum

More information

B3W Rodless Belt Actuator Look for this endurance technology symbol indicating our durability design features The B3W rodless style actuator is design

B3W Rodless Belt Actuator Look for this endurance technology symbol indicating our durability design features The B3W rodless style actuator is design B3W RODLESS BELT ACTUATOR engineered for long life with LINEAR SOLUTIONS MADE EASY B3W Rodless Belt Actuator Look for this endurance technology symbol indicating our durability design features The B3W

More information

506E. LM Guide Actuator General Catalog

506E. LM Guide Actuator General Catalog LM Guide Actuator General Catalog A LM Guide Actuator General Catalog A Product Descriptions 506E Caged Ball LM Guide Actuator Model SKR.. A2-4 Structure and Features... A2-4 Caged Ball Technology... A2-6

More information

STAR Ball Rail Tables TKK

STAR Ball Rail Tables TKK before operating X4 X8 X3 X1 X2 S1 S2 12 4 13 5 14 6 15 7 16 8 1 2 3 9 10 11 1 2 3 4 5 6 8.8 S3 X30 Indramat DANGER! AC-CONTROLLER High voltage Danger of electrical shock Do not touch electrical connnections

More information

Highest Precision: SPL Series

Highest Precision: SPL Series Highest Precision: SPL Series GAM can. Just ask! If you don t see exactly what you need, let us know. We can modify the SPL Series gearboxes to meet your needs. Page 3 provides a list of commonly requested

More information

Profi le rail guides LLR

Profi le rail guides LLR Profi le rail guides LLR Content The SKF brand now stands for more than ever before, and means more to you as a valued customer. While SKF maintains its leadership as the hallmark of quality bearings throughout

More information

Ball rail actuator/guide - RK DuoLine Z/R

Ball rail actuator/guide - RK DuoLine Z/R Ball rail actuator/guide - RK DuoLine Z/R All-round talent with protected guide system Fixing slots in the guide profile and carriage 9Simple 9 connection of accessories 9Excellent 9 fixing options for

More information

X-RAIL RL_XR_EN_12/10.

X-RAIL RL_XR_EN_12/10. X-RIL www.rollon.com bout Rollon evelopment of global business ontinual expansion and optimization of the portfolio 1975 Parent company, Rollon S.r.l., founded in Italy 1991 ounding of Rollon mbh in ermany

More information

LINEAR ACTUATORS. hepcomotion.com

LINEAR ACTUATORS. hepcomotion.com LINEAR ACTUATORS hepcomotion.com PDU2 Belt Driven DLS Belt Driven 3 4 SBD Belt Driven A SDM Ball Screw HDCS Heavy Duty Ball Screw 8 9 LINEAR ACTUATORS ctuator HDLS Heavy Duty Belt Driven PSD Ball Screw

More information

Linear Actuator with Toothed Belt and Integrated Roller Guide Series OSP-E..BHD

Linear Actuator with Toothed Belt and Integrated Roller Guide Series OSP-E..BHD inear Actuator with Toothed Belt and Integrated Roller Guide Series OSP-E..BHD Contents Description Data Sheet No. Page Overview 1.15.001E 11-14 Technical Data 1.15.002E-1 to 3 15-17 Dimensions 1.15.002E-4

More information

Hegra Rail.

Hegra Rail. Hegra Rail www.rollon.com When you move. We move Rollon S.p.A. was set up in 1975 as a manufacturer of linear motion components. Today Rollon group is a leading name in the design, production and sale

More information

Compact Modules CKK/CKR 9-70

Compact Modules CKK/CKR 9-70 Compact Modules CKK/CKR 9-70 (with Ball Rail System, Ball Screw Drive or Toothed Belt Drive) R310EN 2624 (2008.10) The Drive & Control Company Bosch Rexroth AG Linear Motion and Assembly Technologies Ball

More information

Toothed belt axes DGE

Toothed belt axes DGE Toothed belt axes DGE Toothed belt axes DGE Key features At a glance Precision, rigid guide Highly adaptable, thanks to wide choice of mounting and attachment options Wide range of options for attaching

More information

Linear Motion Systems

Linear Motion Systems Linear Motion Systems Thomson - the Choice for Optimized Motion Solutions Often the ideal design solution is not about finding the fastest, sturdiest, most accurate or even the least expensive option.

More information

Precision Modules PSK. The Drive & Control Company

Precision Modules PSK. The Drive & Control Company Precision Modules PSK The Drive & Control Company 2 Bosch Rexroth Coporation Precision Modules PSK R310A 2414 (2008.07) Linear Motion and Assembly Technologies Ball Rail Systems Roller Rail Systems Linear

More information

ELECTRIC AXIS ELEKTRO SVAK SERIES ACTUATORS

ELECTRIC AXIS ELEKTRO SVAK SERIES ACTUATORS ELECTRIC AXIS ELEKTRO SVAK SERIES 1 ELECTRIC AXIS ELEKTRO SVAK SERIES This belt-driven rodless electric actuator is characterised by the fact that the motor and reducer unit is integral with the carriage,

More information

Sizes 32, 40, 50 and 63

Sizes 32, 40, 50 and 63 > Series 6E electromechanical cylinders C_Electrics > 207 Series 6E electromechanical cylinders Sizes 32, 40, 50 and 63 The Series 6E cylinders are mechanical linear actuators with rod, in which the rotary

More information

ANGULAR PNEUMATIC GRIPPERS 180 SERIES DIRECTCONNECT TM

ANGULAR PNEUMATIC GRIPPERS 180 SERIES DIRECTCONNECT TM ANGULAR PNEUMATIC GRIPPERS 1 SERIES DIRECTCONNECT TM with spring assist DCT-RE Series No Adaptor Plates Required Highly Configurable Modular Construction, Exclusive DIRECTCONNECT TM Technology Full Jaw

More information

Linear Actuator with Ball Screw Series OSP-E..S. Contents Description Overview Technical Data Dimensions 79

Linear Actuator with Ball Screw Series OSP-E..S. Contents Description Overview Technical Data Dimensions 79 Linear Actuator with Ball Screw Series OSP-E..S Contents Description Page Overview 71-74 Technical Data 75-78 Dimensions 79 71 The System Concept ELECTRIC LINEAR ACTUATOR FOR HIGH ACCURACY APPLICATIONS

More information

R310EN 2302 ( ) The Drive & Control Company

R310EN 2302 ( ) The Drive & Control Company R31EN 232 (26.4) The Drive & Control Company Bosch Rexroth AG Linear Motion and Assembly Technologies Ball Rail Systems Linear Bushings and Shafts Ball Screw Drives Linear Motion Systems Basic Mechanical

More information

ELGC-BS-KF. Spindle axis. Instructions Operating c [ ]

ELGC-BS-KF. Spindle axis. Instructions Operating c [ ] ELGC-BS-KF Spindle axis Instructions Operating 8095590 8095590 2018-08c [8095592] Translation of the original instructions 2 Festo ELGC-BS-KF 2018-08c Table of contents 1 Further applicable documents...

More information

MINIATURE METAL BELLOWS COUPLINGS

MINIATURE METAL BELLOWS COUPLINGS VERSATILE AND PRECISE. Courtesy of CMA/Flodyne/Hydradyne Motion Control Hydraulic Pneumatic Electrical Mechanical (800) 426-5480 www.cmafh.com MINIATURE METAL BELLOWS COUPLINS SERIES MK 0.05 10 Nm THE

More information

Rotary/lifting modules EHMB, electric

Rotary/lifting modules EHMB, electric Features At a glance The rotary/lifting module EHMB combines rotary and linear motion in one compact unit. The rotation is always transferred through a toothed belt to a hollow shaft by an electric motor

More information

Rotary/lifting modules EHMB, electric

Rotary/lifting modules EHMB, electric Features At a glance The rotary/lifting module EHMB combines rotary and linear motion in one compact unit. The rotation is always transferred through a toothed belt to a hollow shaft by an electric motor

More information

Candy Coup-Link OVER YEARS OF INNOVATION

Candy Coup-Link OVER YEARS OF INNOVATION Candy Coup-Link Zero-backlash, flexible-shaft couplings High torque, excellent response Accommodates misalignment and shaft endplay Aluminum and stainless steel options Inch and metric bores available

More information

PRODUCT OVERVIEW HIGHEST PRECISION

PRODUCT OVERVIEW HIGHEST PRECISION PRODUCT OVERVIEW If you need high precision gear reducers at a reasonable cost and you value innovation and excellent service, take a close look at our product line. You ll find a wide range of products

More information

Ball. Ball cage. Fig.1 Structure of Caged Ball LM Guide Actuator Model SKR

Ball. Ball cage. Fig.1 Structure of Caged Ball LM Guide Actuator Model SKR Caged all LM Guide Actuator Model Inner block all screw shaft Grease nipple Outer rail all cage all Structure and Features Fig.1 Structure of Caged all LM Guide Actuator Model Caged all LM Guide Actuator

More information

FLEXIBLE COUPLINGS - RIGID COUPLINGS Up to Nm of torque and 205 mm bores

FLEXIBLE COUPLINGS - RIGID COUPLINGS Up to Nm of torque and 205 mm bores Edition 10/2014 www.comintec.it FLEXIBLE COUPLINGS - RIGID COUPLINGS Up to 130.000 Nm of torque and 205 mm bores (BACKLASH FREE) Technology for Safety FLEXIBLE COUPLINGS - RIGID COUPLINGS (BACKLASH FREE):

More information

Actuator Units NEW All-in-one-solution

Actuator Units NEW All-in-one-solution Actuator Units NEW All-in-one-solution Axis Servo Motor Amplifier Actuator Units Economy Series ES4 p. 06-07 ES6 p. 08-09 EC3 p. 10-11 EC4 p. 12-13 LM Guide Actuator KR26 p. 16-17 KR33 p. 18-19 Linear

More information

DryLin R Linear Plain Bearings, Fast and Quiet

DryLin R Linear Plain Bearings, Fast and Quiet +90º 40º +250º 100º Linear Plain Bearings, Fast and Quiet linear plain bearings, made from solid polymers, are dimensionally equivalent to standard ball bearings. They are made entirely of wear resistant

More information

High Performance: EPL Series

High Performance: EPL Series High Performance: EPL Series GAM can. If you don t see exactly what you need, let us know. We can modify the EPL Series gearboxes to meet your needs. Page 4 provides a list of commonly requested modifications

More information

Caged Ball LM Guide Actuator SKR

Caged Ball LM Guide Actuator SKR Caged Ball LM Guide Actuator SKR For details, visit THK at www.thk.com Product information is updated regularly on the THK website. CATALOG No.309-11E Integrated LM Guide and Ball Screw High-rigidity /

More information

Linear Motion Systems Toll Free Phone: Toll Free Fax:

Linear Motion Systems Toll Free Phone: Toll Free Fax: Linear Motion Systems Thomson - the Choice for Optimized Motion Solutions Often the ideal design solution is not about finding the fastest, sturdiest, most accurate or even the least expensive option.

More information

Linear Bushings and Shafts. The Drive & Control Company

Linear Bushings and Shafts. The Drive & Control Company Linear Bushings and s The Drive & Control Company 2 Bosch Rexroth Corp. Linear Motion and Assembly Technologies Linear Bushings R310A 3100 Linear Motion Technology Ball Rail Systems Standard Ball Rail

More information

Courtesy of CMA/Flodyne/Hydradyne Motion Control Hydraulic Pneumatic Electrical Mechanical (800)

Courtesy of CMA/Flodyne/Hydradyne Motion Control Hydraulic Pneumatic Electrical Mechanical (800) Courtesy of CMA/Flodyne/Hydradyne Motion Control Hydraulic Pneumatic Electrical Mechanical (8) 46-48 www.cmafh.com.7 Parallel Grippers- Miniature Series Double Wedge General purpose: This style gripper

More information

Toothed belt axis ELGC-TB-KF. Operating instruction [ ]

Toothed belt axis ELGC-TB-KF. Operating instruction [ ] Toothed belt axis ELGC-TB-KF en Operating instruction 8068220 2017-02 [8068222] Original instructions Identification of hazards and instructions on how to prevent them: Danger Immediate dangers which can

More information

Mini slides EGSL, electric

Mini slides EGSL, electric Key features At a glance Electric slide series Maximum performance in compact space: Precision Load capacity Dynamic response Choice of homing: To fixed stop To reference switch Perfect for vertical applications

More information

Automated Format Adjustment

Automated Format Adjustment Automated Format Adjustment reliable and precise in cooperation with 03/2016 Automated Format Adjustment RK Rose+Krieger and LENORD+BAUER benefit from the synergies that arise from the sensible combination

More information

HepcoMotion. SBD Sealed Belt Drive

HepcoMotion. SBD Sealed Belt Drive HepcoMotion SBD Sealed Belt Drive Introduction The HepcoMotion SBD is an exceptionally rugged, quiet and precise linear unit. It uses super-smooth Hepco LBG caged linear ball guides having such high load

More information

High Performance: EPR Series

High Performance: EPR Series High Performance: EPR Series GAM can. If you don t see exactly what you need, let us know. We can modify the EPR Series gearboxes to meet your needs. Page 4 provides a list of commonly requested modifications

More information