SMCJ5.0 thru SMCJ188CA. Surface Mount TRANSZORB Transient Voltage Suppressors. Vishay General Semiconductor

Transcription

1 Surface Mount TRANSZORB Transient Voltage Suppressors DO-214AB (SMC) PRIMARY CHARACTERISTICS 5.0 V to 188 V P PPM 1500 W P D 6.5 W I FSM (uni-directional only) 200 A T J max. 150 C DEVICES FOR BI-DIRECTION APPLICATIONS For bi-directional devices use C or CA suffix (e.g. SMCJ188CA). Electrical characteristics apply in both directions. FEATURES Low profile package Ideal for automated placement Glass passivated chip junction Available in uni-directional and bi-directional Excellent clamping capability Very fast response time Low incremental surge resistance Meets MSL level 1, per J-STD-020, LF maximum peak of 260 C Solder dip 260 C, 40 s Component in accordance to RoHS 2002/95/EC and WEEE 2002/96/EC TYPICAL APPLICATIONS Use in sensitive electronics protection against voltage transients induced by inductive load switching and lighting on ICs, MOSFET, signal lines of sensor units for consumer, computer, industrial, automotive and telecommunication. MECHANICAL DATA Case: DO-214AB (SMCJ) Molding compound meets UL 94 V-0 flammability rating Base P/N-E3 - RoHS compliant, commercial grade Base P/NHE3 - RoHS compliant, high reliability/ automotive grade (AEC Q1 qualified) Terminals: Matte tin plated leads, solderable per J-STD-002 and JESD22-B2 E3 suffix meets JESD 201 class 1A whisker test, HE3 suffix meets JESD 201 class 2 whisker test Polarity: For uni-directional types the band denotes cathode end, no marking on bi-directional types RATINGS (T A = 25 C unless otherwise noted) PARAMETER SYMBOL VALUE UNIT Peak pulse power dissipation with a /0 µs waveform (1)(2) P PPM 1500 W Peak pulse current with a /0 µs waveform (1) See next table A Peak forward surge current 8.3 ms single half sine-wave uni-directional only (2) I FSM 200 A Power dissipation on infinite heatsink, T A = 50 C P D 6.5 W Operating junction and storage temperature range T J, T STG - 55 to C Notes: (1) Non-repetitive current pulse, per Fig. 3 and derated above T A = 25 C per Fig. 2 (2) Mounted on 0.31 x 0.31" (8.0 x 8.0 mm) copper pads to each terminal 1

2 ELECTRICAL CHARACTERISTICS (T A = 25 C unless otherwise noted) DEVICE TYPE MODIFIED J BEND LEAD DEVICE MARKING CODE BREAKDOWN V BR AT I (1) T UNI BI MIN. MAX. TEST I T (ma) STAND-OFF REVERSE LEAKAGE AT I D (µa) (3) PEAK PULSE SURGE (A) (2) CLAMPING AT V C (+) SMCJ5.0 GDD GDD (+) SMCJ5.0A (5) GDE GDE (+) SMCJ6.0 GDF GDF (+) SMCJ6.0A GDG GDG (+) SMCJ6.5 GDH BDH (+) SMCJ6.5A GDK BDK (+) SMCJ7.0 GDL GDL (+) SMCJ7.0A GDM GDM (+) SMCJ7.5 GDN BDN (+) SMCJ7.5A GDP BDP (+) SMCJ8.0 GDQ BDG (+) SMCJ8.0A GDR BDR (+) SMCJ8.5 GDS BDS (+) SMCJ8.5A GDT BDT (+) SMCJ9.0 GDU BDU (+) SMCJ9.0A GDV BDV (+) SMCJ GDW BDW (+) SMCJA GDX BDX (+) SMCJ11 GDY GDY (+) SMCJ11A GDZ GDZ (+) SMCJ12 GED BED (+) SMCJ12A GEE BEE (+) SMCJ13 GEF GEF (+) SMCJ13A GEG GEG (+) SMCJ14 GEH BEH (+) SMCJ14A GEK BEK (+) SMCJ15 GEL BEL (+) SMCJ15A GEM BEM (+) SMCJ16 GEN GEN (+) SMCJ16A GEP GEP (+) SMCJ17 GEQ GEQ (+) SMCJ17A GER GER (+) SMCJ18 GES BES (+) SMCJ18A GET BET (+) SMCJ20 GEU BEU (+) SMCJ20A GEV BEV (+) SMCJ22 GEW BEW (+) SMCJ22A GEX BEX (+) SMCJ24 GEY BEY (+) SMCJ24A GEZ BEZ (+) SMCJ26 GFD BFD (+) SMCJ26A GFE BFE (+) SMCJ28 GFF BFF (+) SMCJ28A GFG BFG (+) SMCJ30 GFH BFH (+) SMCJ30A GFK BFK (+) SMCJ33 GFL BFL (+) SMCJ33A GFM BFM (+) SMCJ36 GFN BFN (+) SMCJ36A GFP BFP (+) SMCJ40 GFQ BFQ (+) SMCJ40A GFR BFR

3 ELECTRICAL CHARACTERISTICS (T A = 25 C unless otherwise noted) DEVICE TYPE MODIFIED J BEND LEAD DEVICE MARKING CODE BREAKDOWN V BR AT I (1) T UNI BI MIN. MAX. TEST I T (ma) STAND-OFF REVERSE LEAKAGE AT I D (µa) (3) PEAK PULSE SURGE (A) (2) CLAMPING AT V C (+) SMCJ43 GFS BFS (+) SMCJ43A GFT BFT (+) SMCJ45 GFU GFU (+) SMCJ45A GFV GFV (+) SMCJ48 GFW GFW (+) SMCJ48A GFX GFX (+) SMCJ51 GFY GFY (+) SMCJ51A GFZ GFZ (+) SMCJ54 GGD GGD (+) SMCJ54A GGE GGE (+) SMCJ58 GGF GGF (+) SMCJ58A GGG GGG (+) SMCJ60 GGH GGH (+) SMCJ60A GGK GGK (+) SMCJ64 GGL GGL (+) SMCJ64A GGM GGM (+) SMCJ70 GGN GGN (+) SMCJ70A GGP GGP (+) SMCJ75 GGQ GGQ (+) SMCJ75A GGR GGR (+) SMCJ78 GGS GGS (+) SMCJ78A GGT GGT (+) SMCJ85 GGU GGU (+) SMCJ85A GGV GGV (+) SMCJ90 GGW GGW (+) SMCJ90A GGX GGX (+) SMCJ GGY GGY (+) SMCJA GGZ GGZ (+) SMCJ1 GHD GHD (+) SMCJ1A GHE GHE (+) SMCJ120 GHF GHF (+) SMCJ120A GHG GHG (+) SMCJ130 GHH GHH (+) SMCJ130A GHK GHK (+) SMCJ150 GHL GHL (+) SMCJ150A GHM GHM (+) SMCJ160 GHN GHN (+) SMCJ160A GHP GHP (+) SMCJ170 GHQ GHQ (+) SMCJ170A GHR GHR SMCJ188 GHT GHT SMCJ188A GHS GHS Notes: (1) Pulse test: t p 50 ms (2) Surge current waveform per Fig. 3 and derate per Fig. 2 (3) For bi-directional types having of V and less, the I D limit is doubled (4) All terms and symbols are consistent with ANSI/IEEE C62.35 (5) For the bi-directional SMCJ5.0CA, the maximum V BR is 7.25 V (6) V F = 3.5 V at I F = A (uni-directional only) (+) Underwriters laboratory recognition for the classification of protectors (QVGQ2) under the UL standard for safety 497B and file number E for both uni-directional and bi-directional devices 3

4 Peak Pulse Power (P PP ) or Current (I PP ) Derating in Percentage, % P PPM - Peak Pulse Power (kw) SMCJ5.0 thru SMCJ188CA THERMAL CHARACTERISTICS (T A = 25 C unless otherwise noted) PARAMETER SYMBOL VALUE UNIT Typical thermal resistance, junction to ambient air (1) R θja 75 C/W Typical thermal resistance, junction to leads R θjl 15 C/W Note: (1) Mounted on minimum recommended pad layout ORDERING INFORMATION (Example) PREFERRED P/N UNIT WEIGHT (g) PREFERRED PACKAGE CODE BASE QUANTITY DELIVERY MODE SMCJ5.0A-E3/57T T 850 7" diameter plastic tape and reel SMCJ5.0A-E3/9AT AT " diameter plastic tape and reel SMCJ5.0AHE3/57T (1) T 850 7" diameter plastic tape and reel SMCJ5.0AHE3/9AT (1) AT " diameter plastic tape and reel Note: (1) Automotive grade AEC Q1 qualified RATINGS AND CHARACTERISTICS CURVES (T A = 25 C unless otherwise noted) x 0.31" (8.0 x 8.0 mm) Copper Pad Areas µs 1.0 µs µs µs 1.0 ms ms t d - Pulse Width (s) Figure 1. Peak Pulse Power Rating Curve - Peak Pulse Current, % I RSM t r = µs Peak Value Half Value - t d t - Time (ms) T J = 25 C Pulse Width (t d ) is defined as the Point where the Peak Current decays to 50 % of I PP 2 /0 µs Waveform as defined by R.E.A. Figure 3. Pulse Waveform T J - Initial Temperature ( C) C J - Junction Capacitance (pf) V R, Measured at Stand-Off Voltage Uni-Directional Bi-Directional Measured at Zero Bias T J = 25 C f = 1.0 MHz V sig = 50 mvp-p Reverse Stand-Off Voltage Figure 2. Pulse Power or Current vs. Initial Junction Temperature Figure 4. Typical Junction Capacitance Uni-Directional 4

5 Transient Thermal Impedance ( C/W) SMCJ5.0 thru SMCJ188CA t p - Pulse Duration (s) Peak Forward Surge Current (A) T J = T J max. 8.3 ms Single Half Sine-Wave 1 Number of Cycles at 60 Hz Figure 5. Typical Transient Thermal Impedance Figure 6. Maximum Non-Repetitive Forward Surge Current Uni-Directional Use Only PACKAGE OUTLINE DIMENSIONS in inches (millimeters) DO-214AB (SMC J-Bend) Cathode Band Mounting Pad Layout (4.69) MAX (3.20) (2.90) (6.22) (5.59) (3.20) MIN (7.11) (6.60) (0.305) (0.152) (1.52) MIN. 0.3 (2.62) (2.06) REF (1.52) (0.76) (8.13) (7.75) (0.2) 0 (0) 5