Varistor Products Radial Lead Varistors > ZA Series
|
|
- Verity Boyd
- 6 years ago
- Views:
Transcription
1 Description The of transient voltage surge suppressors are radial leaded varistors (MOVs) designed for use in the protection of low and medium-voltage circuits and systems. Typical applications include motor control, telecom, automotive systems, solenoid, and power supply circuits to protect circuit board components and maintain data integrity. These devices are available in five model sizes: mm, 7mm, mm, 4mm and 0mm, and feature a wide V DC voltage range of.v to 6V. Agency Approvals Agency Agency File Number See Device Ratings and Specifications Table for part number and brand information. Features 3, (+ 306 for selected parts) Lead free and RoHS compliant option available. lease see the device and ratings specifications table for more information. Wide operating voltage range V M(AC)RMS 4V to 460V DC voltage ratings.v to 6V model sizes available:, 7,, 4, and 0mm Radial lead package for hard-wired or printed circuit board designs Available in tape and reel or bulk pack Standard lead form options No derating up to 8ºC ambient Absolute Maximum Ratings For ratings of individual members of a series, see Device Ratings and Specifications chart Continuous Units Steady State Applied Voltage: AC Voltage Range (V M(AC)RMS ) 4 to 460 V DC Voltage Range (V M(DC) ). to 6 V Transients: eak ulse Current (I TM ) For 8/0μs Current Wave (See Figure ) to 6 A Single ulse nergy Range (Note ) For /00μs Current Wave (W TM ) 0. to J Operating Ambient Temperature Range (T A ) - to +8 ºC Storage Temperature Range (T STG ) - to + ºC Temperature Coefficient (a V ) of Clamping Voltage (V C ) at Specified Test Current <0.0 %/ºC Hi-ot ncapsulation (COATING Isolation Voltage Capability) (Dielectric must withstand indicated DC voltage for one minute per MIL STD 0, Method 30) V COATING Insulation Resistance 00 MΩ CAUTION: Stresses above those listed in "Absolute Maximum Ratings" may cause permanent damage to the device. This is a stress only rating and operation of the device at these or any other conditions above those indicated in the operational sections of this specification is not implied. 0 Littelfuse, Inc. 33 Revision: March 8, 0
2 Ratings & Specifications Lead free and RoHS Compliant Models art Number art Number Standard Models Model Size Disc Dia. (mm) Maximum Rating (8 C) Continuous Transient V RMS V DC nergy x 00μs eak Current 8 x 0μs V M(AC) V M(DC) W TM I TM Specifications ( C) Varistor Voltage at ma DC Test Current V NOM V NOM Maximum Clamping Voltage 8 x 0μs Typical Capacitance f = MHz V C I K C Branding Branding Min Max (V) (V) (J) (A) (V) (V) (V) (A) (pf) V8ZA0 Z08 V8ZA0 Z V8ZA 08Z V8ZA 08Z V8ZA 08Z V8ZA 08Z VZA0 Z VZA0 Z VZA Z VZA Z VZA Z VZA Z V8ZA0 Z8 V8ZA0 Z V8ZA 8Z V8ZA 8Z V8ZA 8Z V8ZA 8Z V8ZA3 8Z3 V8ZA3 8Z V8ZA40 8Z40 V8ZA40 8Z (Note) (Note 3) VZA0 Z VZA0 Z VZA Z VZA Z VZA Z VZA Z VZA3 Z3 VZA3 Z V4ZA 4Z V4ZA 4Z (Note 4) 0 (Note ) (Note 3) V7ZA0 Z7 V7ZA0 Z V7ZA 7Z V7ZA 7Z V7ZA 7Z V7ZA 7Z V7ZA4 7Z4 V7ZA4 7Z V7ZA60 7Z60 V7ZA60 7Z (Note ) (Note 3) V33ZA0 Z33 V33ZA0 Z V33ZA 33Z V33ZA 33Z V33ZA 33Z V33ZA 33Z V33ZA 33Z V33ZA 33Z V33ZA70 33Z70 V33ZA70 33Z V36ZA80 36Z80 V36ZA80 36Z (Note ) 60 (Note ) (Note 3) 3 (Note 3) V39ZA0 Z39 V39ZA0 Z V39ZA 39Z V39ZA 39Z V39ZA3 39Z3 V39ZA3 39Z V39ZA6 39Z6 V39ZA6 39Z V39ZA0 39Z0 V39ZA0 39Z V47ZA0 Z47 V47ZA0 Z V47ZA 47Z V47ZA 47Z V47ZA3 47Z3 V47ZA3 47Z V47ZA7 47Z7 V47ZA7 47Z V47ZA0 47Z0 V47ZA0 47Z V6ZA0 Z6 V6ZA0 Z V6ZA 6Z V6ZA 6Z V6ZA3 6Z3 V6ZA3 6Z V6ZA8 6Z8 V6ZA8 6Z V6ZA0 6Z0 V6ZA0 6Z V68ZA0 Z68 V68ZA0 Z V68ZA 68Z V68ZA 68Z Revision: March 8, 0 0 Littelfuse, Inc.
3 Ratings & Specifications (Continued...) Lead free and RoHS Compliant Models art Number art Number Standard Models Model Size Disc Dia. (mm) Maximum Rating (8 C) Continuous Transient V RMS V DC nergy x 00μs eak Current 8 x 0μs V M(AC) V M(DC) W TM I TM Specifications ( C) Varistor Voltage at ma DC Test Current V NOM V NOM Maximum Clamping Voltage 8 x 0μs Typical Capacitance f = MHz V C I K C Branding Branding Min Max (V) (V) (J) (A) (V) (V) (V) (A) (pf) V68ZA3 68Z3 V68ZA3 68Z V68ZA 68Z V68ZA 68Z V68ZA0 68Z0 V68ZA0 68Z V8ZA0 Z8 V8ZA0 Z V8ZA 8Z V8ZA 8Z V8ZA4 8Z4 V8ZA4 8Z V8ZA 8Z V8ZA 8Z V8ZA0 8Z0 V8ZA0 8Z V0ZA0 Z0 V0ZA0 Z V0ZA3 0Z V0ZA3 0Z V0ZA4 0Z4 V0ZA4 0Z V0ZA 0Z V0ZA 0Z V0ZA0 0Z0 V0ZA0 0Z V0ZA0 Z0 V0ZA0 Z V0ZA 0Z V0ZA 0Z V0ZA4 0Z4 V0ZA4 0Z V0ZA6 0Z6 V0ZA6 0Z V0ZA0 0Z0 V0ZA0 0Z VZA0 Z VZA0 Z VZA Z0 VZA Z VZA4 Z4 VZA4 Z VZA8 Z8 VZA8 Z VZA0 Z0 VZA0 Z V80ZA0 Z80 V80ZA0 Z V80ZA 80Z V80ZA 80Z V80ZA 80Z V80ZA 80Z V80ZA 80Z V80ZA 80Z V80ZA0 80Z0 V80ZA0 80Z V0ZA0 Z0 V0ZA0 Z V0ZA0 Z0 V0ZA0 Z V40ZA0 Z40 V40ZA0 Z V70ZA0 Z70 V70ZA0 Z V330ZA0 Z330 V330ZA0 Z V360ZA0 Z360 V360ZA0 Z V390ZA0 Z390 V390ZA0 Z V430ZA0 Z430 V430ZA0 Z V470ZA0 Z470 V470ZA0 Z V60ZA0 Z60 V60ZA0 Z V680ZA0 Z680 V680ZA0 Z V7ZA0 Z7 V7ZA0 Z V7ZA0 Z7 V7ZA0 Z Note:. Average power dissipation of transients not to exceed 0.W, 0.W, 0.4W, 0.6W or W for model sizes mm, 7mm, mm, 4mm and 0mm, respectively.. nergy rating for impulse duration of 30ms minimum to one half of peak current (auto Load Dump). 3. ma DC test current. 4. Also rated to withstand 4V for minutes.. Higher voltages available, contact Littelfuse. 6. Capacitance Values shown are TYICAL. Also Recognized to UL 449, Transient Voltage Surge Suppressors File Littelfuse, Inc. 3 Revision: March 8, 0
4 ower Dissipation Ratings eak ulse Current Test Waveform RCNT OF RATD VALU AMBINT TMRATUR ( o C) Figure Figure RCNT OF AK VALU 0 90 T O TT TIM Should transients occur in rapid succession, the average power dissipation required is simply the energy (watt-seconds) per pulse times the number of pulses per second. The power so developed must be within the specifications shown on the Device Ratings and Specifications Table for the specific device. Furthermore, the operating values need to be derated at high temperatures as shown in the diagram above. Because varistors can only dissipate a relatively small amount of average power they are, therefore, not suitable for repetitive applications that involve substantial amounts of average power dissipation. 0 = Virtual Origin of Wave T = Time from % to 90% of eak T = Rise Time =. x T T = Decay Time xample - For an 8/0 μs Current Waveform: 8μs = T = Rise Time 0μs = T = Decay Time Maximum Clamping Voltage for mm arts V8ZA0() - V68ZA0() MAX CLAMING VOLTAG MODL SIZ mm 8 TO 68V N(DC) RATING T A = - o C TO 8 o C 0 90 V68ZA0() V6ZA0() 60 V47ZA0() V39ZA0() 40 V33ZA0() V7ZA0() 30 VZA0() V8ZA0() 0 VZA0() -3 V8ZA0() V360ZA0() - V7ZA0() Figure 3 Figure 4 V8ZA0() - V33ZA0() V330ZA0() V70ZA0() V40ZA0() V0ZA0() V0ZA0() V80ZA0() VZA0() V0ZA0() MAX CLAMING VOLTAG MODL SIZ mm 8 TO 330V N(DC) RATING T A = - o C TO 8 o C V0ZA0() V8ZA0() V7ZA0() V7ZA0() V680ZA0() V60ZA0() V470ZA0() V430ZA0() V390ZA0() V360ZA0() MAX CLAMING VOLTAG MODL SIZ mm 360 TO 7V N(DC) RATING T A = - o C TO 8 o C Figure Revision: March 8, 0 0 Littelfuse, Inc.
5 Maximum Clamping Voltage for 7mm arts V8ZA() - V68ZA() V8ZA() - V80ZA() 00 MODL SIZ 7mm 8 TO 68V N(DC) RATING T A = - o C TO 8 o C V68ZA() 70 V6ZA() 60 V47ZA() V39ZA() 40 V33ZA() V7ZA() 30 VZA() V8ZA() 0 VZA() 4,000 3,000,000, MODL SIZ 7mm 8 TO 80V N(DC) RATING T A = - o C TO 8 o C V80ZA() VZA() V0ZA() V0ZA3() V8ZA() V8ZA() Figure 6 Figure Maximum Clamping Voltage for mm arts V8ZA() - V68ZA3() V8ZA4() - V80ZA() 00 MODL SIZ mm 8 TO 68V N(DC) RATING T A = - o C TO 8 o C V68ZA3() 70 V6ZA3() 60 V47ZA3() V39ZA3() 40 V33ZA() V7ZA() 30 VZA() V8ZA() 0 VZA() V8ZA() Figure 8 Figure 9 4,000 3,000,000, MODL SIZ mm 8 TO 80V N(DC) RATING T A = - o C TO 8 o C V80ZA() VZA4() V0ZA4() V0ZA4() V8ZA4() Maximum Clamping Voltage for 4mm arts V8ZA3() - V68ZA() V8ZA() - V80ZA() 600 MODL SIZ 4mm 8 TO 68V N(DC) RATING T A = - o C TO 8 o C 4,000 3,000,000 MODL SIZ 4mm 8 TO 80V N(DC) RATING T A = - o C TO 8 o C V68ZA() 70 V6ZA8() 60 V47ZA7() V39ZA6() 40 V33ZA() V7ZA4() 30 VZA3() V8ZA3() Figure Figure, V80ZA() VZA8() V0ZA6() V0ZA() V8ZA() Littelfuse, Inc. 37 Revision: March 8, 0
6 Maximum Clamping Voltage for 0mm arts V8ZA40() - V36ZA80() V39ZA0() - V80ZA0() MODL SIZ 0mm 8 TO 36V N(DC) RATING T A = - o C TO 8 o C V36ZA80() V33ZA70() V7ZA60() V4ZA() V8ZA40(), MODL SIZ 0mm 39 TO 80V M(AC) RATING T A = - o C TO 8 o V80ZA0() C VZA0() V0ZA0() V68ZA0() V6ZA0() V47ZA0() V39ZA0() Figure Figure Repetitive Surge Capability for mm arts V8ZA0() VZA0() - V68ZA0() MODL SIZ mm V8ZA0() MODL SIZ mm VZA0() - V68ZA0() ,000, ,000,000 Figure 3 Figure 4 V8ZA0() - V7ZA0() MODL SIZ mm V8ZA0() - V7ZA0() 6 Figure ,000, Revision: March 8, 0 0 Littelfuse, Inc.
7 Repetitive Surge Capability for 7mm arts V8ZA() - VZA() Repetitive Surge Capability for mm arts V8ZA() - V7ZA() MODL SIZ 7mm V8ZA() - VZA() MODL SIZ mm V8ZA() - VZA() ,000,000 Figure Figure ,000,000 V8ZA() - V68ZA() V8ZA() - V68ZA3() MODL SIZ 7mm V8ZA() - V68ZA(), MODL SIZ mm V8ZA() - V68ZA3() ,000,000 Figure 6 Figure 9 0 0,000,000 V8ZA() - V80ZA() V8ZA4() - V80ZA(),000, MODL SIZ 7mm V8ZA() - V80ZA(),000,000, MODL SIZ mm V8ZA4() - V80ZA() 0 0,000,000 Figure 7 Figure 0 0 0,000,000 0 Littelfuse, Inc. 39 Revision: March 8, 0
8 Repetitive Surge Capability for 4mm arts V8ZA3() - V68ZA() V8ZA() - V80ZA(), MODL SIZ 4mm 4 V8ZA3() - V68ZA() 6,000, , MODL SIZ 4mm V8ZA() - V80ZA() 0 0,000,000 Figure Figure 0 0,000,000 Repetitive Surge Capability for 0mm arts V8ZA40() - V68ZA0() V0ZA0() - V80ZA0(),000, MODL SIZ 0mm V8ZA40() - V68ZA0() 0 0,000,000,000,000 Figure 3 Figure 4 6,000, ,000 MODL SIZ 0mm V0ZA0() - V80ZA0(),000 NOT: If pulse ratings are exceeded, a shift of V N(DC) (at specified current) of more then +/-% could result. This type of shift, which normally results in a decrease of V N(DC), may result in the device not meeting the original published specifications, but does not prevent the device from continuing to function, and to provide ample protection. 40 Revision: March 8, 0 0 Littelfuse, Inc.
9 Wave Solder rofile Non Lead free rofile Lead free rofile Maximum Wave 40C Maximum Wave 60C TMRATUR (ºC) 00 0 TMRATUR (ºC) Figure TIM(MINUTS) Figure 6 TIM(MINUTS) hysical Specifications nvironmental Specifications Lead Material Soldering Characteristics Tin Coated Copper Wire Solderability per MIL STD 0, Method 08 Operating Ambient Temperature Range Storage Temperature Range - C to +8 C - C to + C Insulating Material Device Labeling Cured, flame retardant epoxy polymer meets UL94V 0 requirements Marked with LF, voltage, UL/CSA logos, and date code Humidity Aging Thermal Shock +8 C, 8% RH,00 hours +/-% typical voltage change +8 C to -40 C times +/-% typical voltage change Solvent Resistance MIL STD 0, Method F Moisture Sensitivity Level, J STD 00C Varistors for Hi-Temperature Operating Conditions: henolic coated devices are available with improved maximum operating temperature of C These devices also have improved temperature cycling performance capability Ratings and specifications are as per standard except Hi ot ncapsulation (Isolation Voltage Capability) = V To order: add 'X347' to part number (e.g. VZA3X347) These devices are not UL, CSA, VD or CCC certified Contact factory for further details 0 Littelfuse, Inc. 4 Revision: March 8, 0
10 roduct Dimensions (mm) To order this crimped and trimmed lead style, standard radial type model numbers are changed by replacing the model letter "ZA" with "ZC." This option is supplied in bulk only. xample: V RMS Voltage Model Min. mm Size 7mm Size mm Size 4mm Size 0mm Size Max. Min. Max. Min. Max. Min. Max. Min. Max. A All - (0.394) - (0.47) - 6 (0.630) - 0 (0.787) - 6. (.043) ØD All - 7 (0.76) - 9 (0.34) -. (0.49) - 7 (0.669) - 3 (0.906) e (see notes below) e Øb Standard Model All 4 (0.7) 6 (0.36) 4 (0.7) 6 (0.36) 6. (0.6) 8. (0.33) 6. (0.6) 8. (0.33) Dimension V8ZA- V6ZA V68ZA- V0ZA V0ZA- V80ZA V0ZA- V7ZA V8ZA- V6ZA V68ZA- V0ZA V0ZA- V80ZA V0ZA- V7ZA All 6. (0.6) (note below) 8. (0.33) (note below) (0.039) 3 (0.8) (0.039) 3 (0.8) (0.039) 3 (0.8) (0.039) 3 (0.8) (0.039) 3 (0.8). (0.09) 3. (0.38). (0.09) 3. (0.38). (0.09) 3. (0.38). (0.09) 3. (0.38). (0.09) 3. (0.38) (0.039) 3 (0.8) (0.039) 3 (0.8) (0.039) 3 (0.8) (0.038) 3 (0.8) (0.038) 3 (0.8). (0.09) 3. (0.38) (0.97) - (0.97) - (0.97) - (0.97) - (0.97) -.6 (0.0) -.6 (0.0) -.6 (0.0) -.6 (0.0) -.6 (0.0) - (0.97) - (0.97) - (0.97) - (0.97) - (0.97) (0.03) A All - CRIMD AND TRIMMD LAD Radial lead types can be supplied with combination preformed crimp and trimmed leads. This option is supplied to the dimensions shown. *Seating plane interpretation per IC-77.6 (0.0) 0.68 (0.07) 3.0 (0.) Order As V8ZA3 V8ZC3 For crimped leads without trimming and any varitions to the above, contact Littelfuse (0.03) 0.68 (0.07) 0.76 (0.030) 0.86 (0.034) 0.76 (0.030) - (0.9) - 9. (0.768) (0.034). (0.886) 0.76 (0.030) (0.034) 9.0 (.4) L TRIM All.4 (0.09) 4.69 (0.8).4 (0.09) 4.69 (0.8).4 (0.09) 4.69 (0.8).4 (0.09) 4.69 (0.8) NOTS: Dimensions in millimeters, inches in parentheses.. For 0mm size devices, a mm "e" dimension option is also available. lease refer to "Ordering Notes" section "X" option code for additional information.. V4ZA() and V4ZC() only supplied with lead spacing of 6.3mm -/+0.mm (0. -/+0.096) Dimension e =.8 min. Does not apply to Tape and Reel parts..4 (0.09) 4.69 (0.8) 4 Revision: March 8, 0 0 Littelfuse, Inc.
11 Tape and Reel Specifications and 7mm Devices, 4 and 0mm Devices CRIMD LADS "ZT" CRIMD LADS "ZT" H SATING LAN C H SATING LAN C H0 Db W0 W W H0 Db W0 W W W W DD0 0 F t DD0 F t STRAIGHT LADS "ZS" STRAIGHT LADS "ZS" H H H Db W0 W W H Db W0 W W W W DD0 DD0 F t 0 F t 0 UNDR CRIMD LADS "ZU" UNDR CRIMD LADS "ZU" H U H U Ho Db W0 W W Ho Db W0 W W W W DD0 DD0 0 F t 0 F t 0 Littelfuse, Inc. 43 Revision: March 8, 0
12 Tape and Reel Specifications Conforms to ANSI and IA specifications Can be supplied to IC ublication 86- Radial devices on tape are supplied with crimped leads, straight leads, or under-crimped leads mm parts are available on tape and reel up to 38 VAC only NOT: Leads are offset by Dim e SYMBOL DSCRITION MODL SIZ mm 7mm mm 4mm 0mm itch of Component.7 +/ / / / /-.0 0 Feed Hole itch.7 +/ / / / /- 0. Feed Hole Center to itch 3.8 +/ / / / /- 0.7 Hole Center to Component Center 6.3 +/ / / / /- 0.7 F Lead to Lead Distance.0 +/ / / / /-.0 h Component Alignment.0 Max.0 Max.0 Max.0 Max.0 Max W Tape Width / / / / / -0. W 0 Hold Down Tape Width.0 +/ / / / /- 0.3 W Hole osition / / / / / -0. W Hold Down Tape osition 0. Max 0. Max 0. Max 0. Max 0. Max H Height from Tape Center to Component Base / / / / / -0.0 H 0 Seating lane Height 6.0 +/ / / / /- 0. H Component Height 9.0 Max 3.0 Max 36.0 Max 40.0 Max 46. Max D 0 Feed Hole Diameter 4.0 +/ / / / /- 0. t Total Tape Thickness 0.7 +/ / / / /- 0. U Undercrimp Width 8.0 Max 8.0 Max 8.0 Max 8.0 Max 8.0 Max p Component Alignment 3 Max 3º Max 3 Max 3 Max 3 Max 44 Revision: March 8, 0 0 Littelfuse, Inc.
13 art Numbering System BAS ART CODS (See Ratings & Specifications tables and notes below) OTION CODS (See notes below) V XXX ZA XX XXXXX For VARISTOR NOMINAL VOLTAG (V NOM ) (One, Two or Three Digits) SRIS + ACKAGING / LAD STYL DSIGNATOR (See BAS ART CODS notes below) ZA = Bulk ack / Straight Leads (standard) ZC = Bulk ack / Crimped and Trimmed Leads ZS = Tape and Reel / Straight Leads ZT = Tape and Reel / Crimped Leads ZU = Tape and Reel / Under-Crimped Leads RLATIV NRGY INDICATOR (One or Two Digits) See OTIONS CODS notes below : LAD-FR AND RoHS COMLIANT OTION For standard parts, use the BAS ART designator only. For parts with non-standard options (such as additional form, packaging and lead space options), use BAS ART + OTION COD. OTION COD items are subject to availability and minimum order requirements. lease contact a Littelfuse products representative for additional information or questions Ordering Notes: BAS ART CODS: OTION CODS: Series + ackaging / Lead Style Designators: Ordering examples: Straight Lead Bulk ack (standard) Straight Lead Tape & Reel Crimped Lead Tape & Reel Crimped & Trimmed Lead Bulk ack Under- Crimp Lead Tape & Reel V8ZA3 V8ZS3 V8ZT3 V8ZC3 V8ZU3 Crimped lead varistors are supplied standard in tape and reel, denoted with "ZT." "ZC" style is supplied in bulk only. "ZU" style is supplied in tape and reel only. X: MM LAD SACING OTION -- For -/+ mm (0.394-/ in) lead spacing (available on 0mm diameter models only), append standard model BAS ART number with "X." xample: Standard Model V8ZA40 Order As V8ZA40X X8: Nickel Barrier COATD WIR OTION -- All standard parts use Tin Coated Copper wire. Nickel Barrier Coated wire is available as an option, consisting of Copper wire with a flashing of Nickel followed by a top coating of Tin. To order append standard model BAS ART number with "X8." xample: For crimped leads without trimming and any varitions other than that described above, please contact Littelfuse. Standard Model V8ZA40 Order As V8ZA40X8 Lead free / RoHS Designator: For Lead free and RoHS compliant parts add "" after the BAS ART number and before any other OTION COD: Standard Model V8ZA40 Standard Model with Option V8ZA40X Order As V8ZA40 Order As V8ZA40X TA & RL QUANTITIS: Littelfuse varistors are shipped standard in bulk pack with straight leads and lead spacing outlined in the ackage Dimensions section of this data sheet. Contact your Littelfuse sales representative to discuss non-standard options. Device Size Voltage Quantity er Reel "S" Reel "T" Reel "U" Reel mm All mm All mm All 4mm < V 0mm < V 0 Littelfuse, Inc. 4 Revision: March 8, 0
Features. Continuous ZA Series Units. ) 4 to 460 V DC Voltage Range (V M(DC) ) 5.5 to 615 V Transients: Peak Pulse Current (I TM
ZA Varistor Series RoHS Description The ZA Series of transient voltage surge suppressors are radial leaded varistors (MOVs) designed for use in the protection of low and medium-voltage circuits and systems.
More informationFeatures. Samples. Units Continous: Steady State Applied Voltage: DC Voltage Range (VM(DC)) 150 to 970 V AC Voltage Range (V M(AC)RMS
S 34S Varistor Series RoHS Description The Littelfuse S 34S thermally protected varistor is a self-protected device. It consists of a 34mm square varistor with an integral thermal designed to open in the
More informationMetal-Oxide Varistors (MOVs) Surface Mount Multilayer Varistors (MLVs) > MLA Automotive Series
MLA Automotive Varistor Series RoHS Description The MLA Automotive Series of transient voltage surge suppression devices is based on the Littelfuse Multilayer fabrication technology. These components are
More informationTHIS PAGE WAS INTENTIONALLY LEFT BLANK.
THIS PAGE WAS INTENTIONALLY LEFT BLANK. Table of Contents Features... 2 Applications... 2 Approvals... 2 Part Marking... 3 System... 4 Absolute Ratings... 4 Fuse Configuration and Dimensions... 5 Specifications...
More informationVZCA2.E VZCA8.E CQC CQC CQC CQC CQC D-Seires. 11 to to 1465.
Description CNR D/V/P/H series metal oxide varistor are nonlinear resistors, consisting main of zinc oxide and several kinds of metal oxide additive.they are bilateral and symmetrical V-I characteristics
More informationP-Series 11 to to to to to to to 1100 >1000 <25
Description CNR D/V/P/H series metal oxide varistor are nonlinear resistors, consisting main of zinc oxide and several kinds of metal oxide additive.they are bilateral and symmetrical V-I characteristics
More informationE CQC CQC CQC CQC CQC D-Seires. 11 to to to
Description CNR D/V/P/H/N series metal oxide varistor are nonlinear resistors, consisting main of zinc oxide and several kinds of metal oxide additive.they are bilateral and symmetrical V-I characteristics
More informationMetal-Oxide Varistors (MOVs) Surface Mount Multilayer Varistors (MLVs) > MLN Series. MLN SurgeArray TM Suppressor. Description
MLN SurgeArray TM Suppressor RoHS Description The MLN SurgeArray Suppressor is designed to help protect components from transient voltages that exist at the circuit board level. This device provides four
More informationFeatures. Continuous AUML Series Units. ) 1.5 to 25 J Jump Start Capability (5 minutes), (V JUMP. ) 48 V Operating Ambient Temperature Range (T A
AUML Varistor Series RoHS Description The AUML Series of Multilayer Transient Surge Suppressors was specifically designed to suppress the destructive transient voltages found in an automobile. The most
More informationAUML Varistor Series. Surface Mount Varistors
The AUML Series of Multilayer Transient Surge Suppressors was specifically designed to suppress the destructive transient voltages found in an automobile. The most common transient condition results from
More informationSIDACtor Protection Thyristors Baseband Protection (Voice-DS1)
SIDACtor Series - DO-214 Description SIDACtor Series DO-214AA are designed to protect baseband equipment such as modems, line cards, CPE and DSL from damaging overvoltage transients. The series provides
More informationVaristor Products Radial Lead Varistors > UltraMOV TM Series
RoHS Descripion The UlraMOV Meal Oxide Varisor Series is designed for applicaions requiring high peak surge curren raings and high energy asorpion capailiy. UlraMOV varisors are primarily inended for use
More informationFeatures. Continuous UltraMOV Series Units. ) -55 to +125 ºC. Hi-Pot Encapsulation (COATING Isolation Voltage Capability) 2500 V
RoHS Descripion The UlraMOV Meal Oxide Varisor Series is designed for applicaions requiring high peak surge curren raings and high energy absorpion capabiliy. UlraMOV varisors are primarily inended for
More informationSIDACtor Protection Thyristors Baseband Protection (Voice-DS1) SIDACtor Series - DO-214 E Description
SIDACtor Series - DO-214 RoHS Pb e3 Description SIDACtor Series DO-214AA are designed to protect baseband equipment such as modems, line cards, CPE and DSL from damaging overvoltage transients. The series
More informationMetal Oxide Varistor:TVR-M Series
Features. RoHS and Halogen-free compliant 2. Body size: Ф5 ~ Ф20mm 3. ide continuous voltage range: 30Vac ~ 465Vac 4. Operating temperature range: -40 C ~ +25 C Storage temperature range: -40 C ~ +50 C
More informationMetal Oxide Varistor:TVR-M Series
Features. RoHS and Halogen-free compliant 2. Body size: Ф5 ~ Ф20mm 3. Wide continuous voltage range: 30Vac ~ 465 Vac 4. Operating temperature range: -40 C ~ +25 C 5. Storage temperature range: -40 C ~
More informationTransient Voltage Suppression Diodes SMTO ka > LTKAK6 series. Description. Features. Test Current I T. Reverse Breakdown Voltage (V BR I T
SMTO-218-6 ka > LTKAK6 series LTKAK6 Series RoHS Pb e3 Description The LTKAK6 series offers superior clamping characteristics over standard S.A.D. technologies by virtue of the Littelfuse Foldbak technology,
More informationSPHV-C Series 200W Discrete Bidirectional TVS Diode
SPHV-C Series W Discrete Bidirectional TVS Diode RoHS Pb GREEN Description The SPHV-C series is designed to replace multilayer varistors (MLVs) in portable applications, LED lighting modules, and low speed
More informationTABLE of contents. Metal Oxide Varistor (MOV) Varistors-5D Series Varistors-7D Series Varistors-10D Series... 5
TABLE of contents Subject Page Metal Oxide Varistor (MOV)..................................................... 1 Varistors-5D Series............................................................ 3 Varistors-7D
More informationMetal Oxide Varistor (MOV) Data Sheet
Metal Oxide Varistor (MOV) Data Sheet Features Wide operating voltage (V 1mA ) range from 18V to 1800V Fast responding to transient over-voltage Large absorbing transient energy capability Low clamping
More informationSensitive Triacs. Description. Features. 10Amps. Applications. Schematic Symbol. Symbol Parameter Value Unit = 50 C SOT-223 T L TO-92 T C
Description New 1Amp bi-directional solid state switch series offering direct interface to microprocessor drivers in economical TO-92 and surface mount packages. The die voltage blocking junctions are
More informationvaristor plus catalog
varistor plus catalog Single Layer Varistor Technology Surface Mount & Leaded Products SEI electronics inc. P.O.Box 58789 Raleigh,NC 27658-8789 Tel. 1-888-sei-sei-sei Fax. 919-850-9504 www.seielect.com
More informationFeatures 60R010X & 60R017X. P d typ. (W) I max (A) V max (Vdc)
60R Series RoHS * Description The 60R Series radial leaded device is designed to provide overcurrent protection for ( 60V) applications where space is not a concern and resettable protection is preferred.
More informationLeaded Metal Oxide Varistors
FEATURES GENERAL UROSE TRANSIENT VOLTAGE ROTECTION MEETS UL1449 REV. 3 (File # E357747) FOR SURGE ROTECTIVE DEVICES CURRENT ITHSTANDING (1x U TO 6,500A) TEMERATURE RANGE -40 C ~ +85 C VARISTOR VOLTAGE
More informationMETAL OXIDE VARISTOR (MOV)
METAL OXIDE VARISTOR (MOV) How to Order SR 241 K 10 D S 40 X Type code Tolerance Disk Size Code Disk Type Lead Type or Taping Code Lead Cutting Special Request SR: Walsin ( volt) (From 180 to 112) Two
More informationAQxxC Series 450W Discrete Bidirectional TVS Diode
AQxxC Series 5W Discrete Bidirectional TVS Diode RoHS Pb GREEN Description The bidirectional AQxxC series is designed to replace multilayer varistors (MLVs) in electronic equipment for low speed and DC
More information2920L Series. POLY-FUSE Resettable PTCs. Surface Mount > 2920L Series. Description
RoHS Description The PTC provides surface mount overcurrent protection for medium voltage ( 60V) applications where resettable protection is desired. Features RoHS compliant, lead-free and halogen-free
More informationFeatures. V max (Vdc) I max (A) typ. (W) P d
2016L Series RoHS Description The 2016L Series PTC provides surface mount overcurrent protection for low voltage ( 60V applications where resettable protection is desired. Features RoHS compliant, lead-free
More informationRadial Leaded > 16R Series. Description. Features. Applications. Additional Information. Datasheet. Maximum Time To Trip Current (A) P d typ.
16R Series RoHS Description Littelfuse 16R Series Radial Leaded PTCs are designed to provide resettable overcurrent protection serving a wide range of electronics applications. With maximum 16 volts and
More informationAQHV Series 200W Discrete Unidirectional TVS Diode
AQHV Series W Discrete Unidirectional TVS Diode RoHS Pb GREEN Description The AQHV series is designed to provide an option for very fast acting, high performance over-voltage protection devices. Ideally
More informationPOLYFUSE Resettable PTCs Surface Mount > 2920L Series
Surface Mount > Description The device provides surface mount overcurrent protection for medium voltage ( 60V) applications where resettable protection is desired. Features Agency Approvals AGENCY AGENCY
More informationTVS Diode Arrays (SPA Diodes) SP2502L Series 3.3V 75A Diode Array. Lightning Surge Protection - SP2502L Series. RoHS Pb GREEN.
SP202L Series 3.3V 7A Diode Array RoHS Pb GREEN Description The SP202L provides overvoltage protection for applications such as 0/00/000 Base-T Ethernet and T3/ E3 interfaces. This device has a low capacitance
More informationVE09 M K. AC Operating Voltage (EIA coding) VE. Nominal Voltage at 1 ma dc (EIA coding) VF
Ordering Code HOW TO ORDER VE09 M 0 0251 K Type VE 07 VE 09 VE 13 VE 17 VE 24 VF 05 VF 07 VF 10 VF 14 VF 20 VN 32 VB 32 Series M: Varistors for general applications P: Varistors for heavy duty applications
More informationRadial Leaded > 72R Series. Description. Features. Applications. Maximum Time To Trip Current (A) P d typ. (W)
72R Series RoHS * Description The 72R Series is designed to provide overcurrent protection to 72Vdc maximum voltage with a maximum 40A short circuit rating. Features 72Vdc max voltage w/max 40A short circuit
More information1.5KE SERIES Taiwan Semiconductor
Transient Voltage Suppressor FEATURES - Excellent clamping capability - Low dynamic impedance - 1500W surge capability at 10 / 0 μs waveform - Fast response time: Typically less than 1.0ps from 0 volt
More informationMOV Transient Voltage Suppressors
MOV Transient Voltage Suppressors Description CKE, features two radial leaded MOV product lines: Standard Series High Energy Series CKE, also features three High Energy Special Package MOV products: PA
More informationDear Customer, Terms & Conditions for last Time Buy. Best Regards. Meng Wang. Product Manager, Tel: EXT 7955
Littelfuse, Inc. 8755 West Higgins Road, Suite 5 Chicago, IL 6631 USA (773) 628-1 7.1,218 RE: LFPCN41214 From: Littelfuse Product Management Team Dear Customer, Please be aware that Littelfuse is discontinuing
More information1SMA10CAT3G Series, SZ1SMA10CAT3G Series. 400 Watt Peak Power Zener Transient Voltage Suppressors. Bidirectional
110CAT3G Series, SZ110CAT3G Series 400 Watt Peak Power Zener Transient Voltage Suppressors Bidirectional The series is designed to protect voltage sensitive components from high voltage, high energy transients.
More informationPOLYFUSE Resettable PTCs Surface Mount > 2920L Series
Surface Mount > Description The PTC provides surface mount overcurrent protection for medium voltage ( 60V) applications where resettable protection is desired. Features Agency Approvals AGENCY AGENCY
More informationMTU1 Series Isolated 1W Single & Dual Output SM DC/DC Converters
www.murata-ps.com MTU1 Series SELECTION GUIDE FEATURES Patent Protected UL60950 recognised Footprint over pins 0.69cm 2 Single & dual isolated output 1kVDC Isolation Hi Pot Test Efficiency up to 88% (Typ.)
More informationRev.A0
PRIMARY CHARACTERISTICS SMB(DO-214AA) PACKAGE P D V Z 3W 6.2V~200V T J,Max 150 Body Marking Example Marking : Please See Page 2~3 Ex : SMB3EZ5.6D5 Logo Date Code 3H6 VYM Cathode Band Marking Code FEATURES
More informationRadial Leaded > 250R Series. Description. Features. Applications. Customer Premises Equipment (CPE) Central Office (CO)/ telecom centers
250R Series RoHS * Description The 250R Series is designed to protect against short duration high voltage fault currents (power cross or power induction surge) typically found in telecom applications (250Vrms).
More informationEMC, FILTERS & SUPPRESSION
EMC, FILTERS SUPPRESSION A comprehensive range of voltage dependent, metal oxide semiconductor devices (varistors) designed to protect equipment against transient voltage spikes. Connected directly across
More informationTHIS PAGE WAS INTENTIONALLY LEFT BLANK.
THIS PAGE WAS INTENTIONALLY LEFT BLANK. Table of Contents Transient Suppression Diodes............................................................ 1 General Information...........................................................................
More informationTeccor brand Thyristors Standard Bidirectional SIDACs
Kxxxzy SIDAC Description The SIDAC is a silicon bilateral voltage triggered switch. Upon application of a voltage exceeding the SIDAC breakover voltage point, the SIDAC switches on through a negative resistance
More informationMetal Oxide Varistor:TVR-D Series
Features. RoHS compliant 2. Halogen-free series are available 3. Body size: Ф7mm ~ Ф 20mm 4. Wide operating voltage range: 5Vac ~ 680Vac 5. High surge current rating up to 3KA 6. High energy rating up
More informationPOLY-FUSE Resettable PTCs. 2920L Series. Surface Mount > 2920L Series E R RoHS. Description
2920L Series RoHS Description The 2920L Series PTC provides surface mount overcurrent protection for medium voltage ( 60V applications where resettable protection is desired. Features RoHS compliant, lead-free
More informationMTU2 Series Isolated 2W Single & Dual Output SM DC/DC Converters
www.murata-ps.com MTU2 Series SELECTION GUIDE FEATURES Patent Protected UL 9 Recognised Footprint over pins.69cm 2 Single & dual isolated output 1kVDC Isolation Hi Pot Test Efficiency up to 85% (Typ.)
More informationGas Discharge Tube (GDT) Products CG/CG2 Series. CG/CG2 Series
Description Littelfuse highly reliable GDTs provide a high degree of surge protection in a small size ideal for board level circuit protection. GDTs function as switches which dissipate a minimum amount
More informationMLE Varistor Series. Features. Size Metric EIA Applications.
The MLE Series family of Transient Voltage Suppression devices are based on the Littelfuse Multilayer fabrication technology. These components are designed to suppress ESD events, including those specified
More informationAxial Lead & Cartridge Fuses 2AG > Time Lag > 229/230 Series
229/ 2AG, Slo-Blo Fuse with Indicating Option PS E Description Agency Approvals Agency Agency File Number Ampere Range E10480 250mA - 3.5A LR 29862 250mA - 7A E10480 4A - 7A Littelfuse 229/230 series Slo-Blo
More informationMetal Oxide Varistor:TVR-D Series
Features. RoHS compliant 2. Halogen-free series are available 3. Body size: Ф7mm ~ Ф 20mm 4. Wide operating voltage range: 5Vac ~ 680Vac 5. High surge current rating up to 3KA 6. High energy rating up
More informationDC-DC CONVERTERS 4:1 WIDE INPUT RANGE UP TO 9 WATTS SINGLE AND DUAL OUTPUT, SIP PACKAGE SWB9 SERIES
DC-DC CONVERTERS 4:1 WIDE INPUT RANGE UP TO 9 WATTS SINGLE AND DUAL OUTPUT, SIP PACKAGE FEATURES 4:1 Ultra Wide Input Range Output Current up to 2000 ma Miniature SIP (Single-In-Line) Package, 0.86 0.36
More informationSELECTION GUIDE. Nominal Input Order Code 1 Voltage. Output Voltage
www.murata-ps.com NTE Series FEATURES RoHS compliant Lead frame technology Single isolated output 1kVDC Isolation Efficiency up to 78% Power density 1.8W/cm 3 Wide temperature performance at full 1 Watt
More informationReference Guide to Standard Products Part No. Applicable Standards Varistor at ma Allowable Clamping at 8/20μs Peak Current at 8/20μs(A) Recommended A
ZNR Transient/Surge Absorbers Type: D Series: E ZNR Transient/Surge Absorber, Series E, Type D features large surge current and energy handling capability for absorbing transient overvoltage in a compact
More informationPLED Ultra Low Holding Current Series
RoHS Description Agency Approvals This PLED ultra-low holding current series exhibits a low holding current parameter that makes it compatible with LED lighting strings. The series provide a switching
More informationSM Series 400W TVS Diode Array
General Purpose ESD Protection - SM5 through SM3 SM Series W TVS Diode Array RoHS Pb GREEN Description The SM series TVS Diode Array is designed to protect sensitive equipment from damage due to electrostatic
More informationUL Recognised Wirewound Resistors
UL1412 recognised fusible resistor * Failsafe mains fusing at 12 / 24Vrms Inrush and surge withstanding UL94-V flameproof coating SMD leadform option available RoHS compliant * UL file number E23449. Electrical
More informationMetal Oxide Varistor:TVT Type
Features. RoHS compliant 2. 2 leaded or 3 leaded thermally protected metal oxide varistor, Three-leaded version available for indication purposes. 3. Body size : 4, 20, 22, 25, 32 and 34 mm in diameter
More informationGas Discharge Tubes SL1002A Series
SL12A Series SL12A Series RoHS Agency Approvals AGENCY AGENCY FILE NUMBER E128662 2 Electrode GDT Graphical Symbol Additional Information Description The Broadband Optimized SL12A series has been especially
More informationPolypropylene Pulse/High Frequency Capacitors R74 Series Single Metallized Polypropylene Film, Radial, AC Applications (Automotive Grade)
Polypropylene Pulse/High Frequency Capacitors R74 Series Single Metallized Polypropylene Film, Radial, AC Applications (Automotive Grade) Overview The R74 Series is constructed of metallized polypropylene
More informationNTA Series Isolated 1W Dual Output SM DC/DC Converters
www.murata-ps.com NTA Series FEATURES RoHS compliant Efficiency up to 78% Wide temperature performance at full 1 Watt load, 40 C to 85 C UL 94V-0 Package material Footprint over pins 1.64cm 2 Lead frame
More information2W, Low Cost DIP, Dual Output DC/DC Converters
2W, Low Cost DIP, Dual Output DC/DC s Key Features Low Cost 500 Isolation MTBF > 0,000 Hours mv P-P Ripple and Noise Input 12 Output {15 Temperature Performance -25] to +71] Short Circuit Protection UL
More informationTransient Voltage Suppressor
Features 400W surge capability at 1ms Excellent clamping capability Low zener impedance Fast response time : typically less then 1.0 ps from 0 volt to VBR(min.) Typical IR less then 1μA above 10V RoHS
More informationFeatures. P d typ. (W) I max (A)
250R Series RoHS * Description The 250R Series is designed to protect against short duration high voltage fault currents (power cross or power induction surge) typically found in telecom applications (250Vrms).
More informationV35, V40, V50, V60, V75, V95, V130, V140, V150, V175, V230, V250, V275, V300, V385, V420, V460, V510 CSA Recognized File No.
Description Disc Varistors with Radial Leads are standard metal oxide varistors designed mainly for electronic applications. They offer excellent surge protection for use in PCB s, computers, power supplies,
More informationElectrical Specifications 5mm. Ic (A) (V)
Features: AC operating voltage from 11V to 1000V DC operating voltage from 14V to 1465V Peak current up to 6500 amps Energy handling up to 625J UL1449 certified file no. E476752 Operating temperature range
More informationRadial Leads/SkyCap /AR Series
Radial Leads/SkyCap /AR Series AUTOMOTIVE GENERAL INFORMATION AVX AR Series Conformally Coated Radial Leaded MLC Temperature Coefficients: C0G (NP0), X7R, X8R 3000, 2000, 1000, 200, 100, 50 Volts Case
More informationTHIS PAGE WAS INTENTIONALLY LEFT BLANK.
THIS PAGE WAS INTENTIONALLY LEFT BLANK. Table of Contents Transient Suppression Diodes... 1 General Information... 2 P4KE Series 400 Watt... 8 SA Series 500 Watt... 12 P6KE Series 600 Watt... 18 1.5KE
More informationMTC2 Series Isolated 2W SM 2:1 Input Single Output DC-DC Converters
MTC2 Series SELECTION GUIDE FEATURES UL 9 recognised for reinforced insulation ANSI/AAMI ES1-1, 1 MOPP/ 2 MOOPs recognised 3kVAC isolation test voltage Hi Pot Test Continuous short circuit protection Output
More information1000 VDC 1250 VDC 125 VAC 250 VAC J K M 125 VAC, 250 VAC
Metallized Polyester Film Capacitor Type: ECQE(F) Non-inductive construction using metallized Polyester film with flame retardant epoxy resin coating Features Self-healing property Excellent electrical
More informationSurface Mount > 0603L Series. Description. Features. Applications. Maximum Time To Trip Current (A) P d typ. (W)
0603L Series RoHS Description The 0603L Series PTC provides surface mount overcurrent protection for applications where space is at a premium and resettable protection is desired. Features Agency Approvals
More information150 WATT HEW SINGLE SERIES DC/DC CONVERTERS
Features Description The 4:1 Input Voltage 150 W single HEW Series of DC/DC converters provide precisely regulated dc outputs. The output voltage is fully isolated from the input, allowing the output to
More informationNTC Thermistor:TTC05 Series
Features 1. RoHS compliant 2. Halogen-Free (HF) series are available 3. Body size: Ф5mm 4. Radial lead resin coated 5. Operating temperature range: -30 ~+125 6. Wide resistance range 7. Cost effective
More informationENCAPSULATED MOV SERIES
INTRODUCTION The Encapsulated MOV Series is ideal for SMT processing and Pick and Place assembly. Its low profile package offers space savings compared to leaded devices. These encapsulated components
More informationAutomotive Grade Thin Film Chip Resistors
FEATURES PRECISE TOLERANCE AND TEMPERATURE COEFFICIENT EIA STANDARD CASE SIZES (0402 ~ 2512) AEC-Q200 QUALIFIED FOR AUTOMOTIVE APPLICATIONS LOW NOISE, THIN FILM (NiCr) CONSTRUCTION TEMPERATURE RANGE -55
More informationMetal Oxide Varistor:TVR Series
Features. Body size: Ф5 ~ Ф20mm 2. Wide operating voltage range:vac ~ 00Vac 3. Operating temperature range:-40 ~ +85 C 4. Agency recognition: UL 449 3 rd /UL 44/cUL/VDE /CSA/CQC 5. TVR48~42 and TVR208~202
More informationDescription. Features. Applications. Environmental. Characteristics Symbol Conditions Value Unit Repetitive Peak Reverse Voltage V RRM.
LSIC2SD12C1, 12 V, 1 A, TO-252-2L (DPAK) LSIC2SD12C1 RoHS Pb Description This series of silicon carbide (SiC) Schottky diodes has negligible reverse recovery current, high surge capability, and a maximum
More informationENCAPSULATED MOV SERIES
INTRODUCTION The Encapsulated MOV Series is ideal for SMT processing and Pick and Place assembly. Its low profile package offers space savings compared to leaded devices. These encapsulated components
More informationDC-DC CONVERTERS 2:1 INPUT RANGE, UP TO 2 WATTS MEDICAL APPLICATIONS MTWA2 SERIES
DC-DC CONVERTERS 2:1 INPUT RANGE, UP TO 2 WATTS MEDICAL APPLICATIONS FEATURES 2:1 Wide Input Voltage Range: 4.5-12 Input, 9-18 and 18-36 and 36-75 5000Vac Input to Output 2MOPP Isolation Remote On/Off
More informationLSIC2SD065C06A 650 V, 6 A SiC Schottky Barrier Diode
LSICSD065C06A 650 V, 6 A SiC Schottky Barrier Diode Description This series of silicon carbide (SiC) Schottky diodes has negligible reverse recovery current, high surge capability, and a maximum operating
More informationFeatures. Samples. I max (A) P d. typ. (W)
0805L Series RoHS Description The 0805L Series PTC provides surface mount overcurrent protection for applications where space is at a premium and resettable protection is desired. Features Agency Approvals
More informationSELECTION GUIDE. Nominal Input Order Code Voltage. Output Voltage. Reflected ripple current
www.murata-ps.com FEATURES RoHS compliant Efficiency up to 82% Wide temperature performance at full 1 Watt load, 40 C to 85 C UL 94V-0 package material Reduced footprint at 0.98cm 2 Industry standard pinout
More informationSurface Mount > 1812L Series. Description. Features. Applications. I max (A) typ. (W) P d. Current (A)
1812L Series RoHS Description The 1812L Series PTC provides surface mount overcurrent protection for applications where resettable protection is desired. Features RoHS compliant, lead-free and halogen-free
More informationSELECTION GUIDE - SINGLE OUTPUT 1. Nominal Input Voltage Output Voltage
www.murata-ps.com SELECTION GUIDE - SINGLE OUTPUT 1 Order Code Nominal Input Voltage Output Voltage Output Current Input Current at Rated Load Load Regulation (Typ) Load Regulation (Max) Ripple & Noise
More informationGEN2 SiC Schottky Diode. Description. SiC Schottky Diode. Features. Applications. Environmental
GEN2 LSIC2SD12A8, LSIC2SD12C8, 12 V, 8 A, A, TO-252-2L TO-22-2L(DPAK) LSIC2SD12C8 RoHS Pb Description This series of silicon carbide (SiC) Schottky diodes has negligible reverse recovery current, high
More informationNKE Series. Isolated Sub-Miniature 1W Single Output DC/DC Converters FEATURES
www.murata-ps.com NKE Series SELECTION GUIDE Order Code Nominal Input Voltage Output Voltage Output Current Input Current at Rated Load Efficiency Isolation Capacitance MTTF 1 Package Style FEATURES RoHS
More informationNXE1 Series Isolated 1W Single Output SM DC/DC Converters
NXE1 Series SELECTION GUIDE FEATURES Patents pending Lower Profile UL695 Recognition pending ANSI/AAMI ES661-1 Recognition pending 3kVDC Isolation Hi Pot Test Substrate Embedded Transformer Automated Manufacture
More informationTeleLink SM Fuse. CSA Approved File No. LR UL Recognized E Patent Pending. TeleLink SM Fuse. Product Description.
Product Description The TeleLink Surface Mount (SM) surge resistant time lag fuse has been designed to offer the ultimate in circuit protection while meeting the necessary surge requirements of the telecommunications
More informationSELECTION GUIDE. Order code B0303NXT-1W B0305NXT-1W B0309NXT-1W
B-NXT-1W 1W, FIXED INPUT, ISOLATED SINGLE OUTPUT SMD DC-DC CONVERTER FEATURES Footprint over pins 1.37cm 2 Short Circuit Protection(automatic recovery) I/O isolation voltage 1000VDC Operating Temperature:
More information400W, 5V - 188V Surface Mount Transient Voltage Suppressor
400W, 5V - 188V Surface Mount Transient Voltage Suppressor FEATURES Low profile package Ideal for automated placement Glass passivated junction Excellent clamping capability Fast response time: Typically
More informationSpezifikation für Freigabe / specification for release
Artikelnummer / part number : 820 553 811 Datum / Date : 2006-06-28 ROHS Compliant A Elektrische Eigenschaften / electrical properties : TECHNICAL DATA Part Number Breakdown Working Clamping Current Peak
More informationSH01S/D Series 1W DC/DC CONVERTER, SMD-Package
SH01S/D Series 1W DC/DC CONVERTER, SMD-Package FEATURES Efficiecny up to 80% SMD Package with Industry Standard Pinout Operating Temperature Range 40 C to +8 C Moisture sensitivity level (MSL) 2 Isolation
More informationG N R 2 0 D K * * *
VARISTORS Catalog number system G N R 2 0 D 2 0 1 K * * * Product Series Element Size Type Nominal at 1mA DC Tolerance Suffixes GNR: General Nonlinear Resistor 05 :ψ5mm 07 :ψ7mm 10 :ψ10mm 14 :ψ14mm 20
More informationNS6A5.0AFT3G, SZNS6A5.0AFT3G Series. 500 Watt Peak Power Zener Transient Voltage Suppressors. Unidirectional
OBSOLETE/EOL NS65.0FT3G, SZNS65.0FT3G Series DTE June/30/2018 PCN/ECN# LFPCN41246 REPLCED BY SM6L Series 500 Watt Peak Power Zener Transient Voltage Suppressors Littelfuse.com Unidirectional The NS6xxFT3G
More informationSELECTION GUIDE. Nominal Input Order Code Voltage. Output Voltage. Reflected ripple current
www.murata-ps.com NML Series FEATURES RoHS compliant Single isolated output 1kVDC isolation Efficiency up to 85% Wide temperature performance at full 2 watt load, 40 C to 85 C Power density 2.01W/cm 3
More informationGas Discharge Tubes GTCC23-XXXM-R01-2 Series
Littelfuse Circuit Protection 3mm 2Pole Chip type GDTs (ceramic gas discharge tubes), are commonly used to help protect sensitive telecom equipment such as communication lines, signal lines and data transmission
More informationSELECTION GUIDE. Order code Voltage(VDC) NTE0303XMC NTE0305XMC
1W, FIXED INPUT, ISOLATED SINGLE OUTPUT SMD DC-DC CONVERTER FEATURES Footprint over pins 1.37cm 2 Short Circuit Protection(automatic recovery) I/O isolation voltage 1000VDC Operating Temperature: -40 ~+85
More informationLSIC2SD065A20A 650 V, 20 A SiC Schottky Barrier Diode
LSIC2SD065A20A 650 V, 20 A SiC Schottky Barrier Diode RoHS Pb Description This series of silicon carbide (SiC) Schottky diodes has negligible reverse recovery current, high surge capability, and a maximum
More informationNMJ Series 5.2kVDC Isolated 1W DC-DC Converters
www.murata-ps.com NMJ Series FEATURES UL60950 recognised Wide temperature performance at full 1 watt load, 40 to 85 Single and dual outputs SIP package style 5.2kVD isolation Hi Pot Test 3V, 5V & 12V input
More information