Heatshrink solutions Insulate, identify and protect your wires and cables
|
|
- Darleen Carpenter
- 5 years ago
- Views:
Transcription
1 Heatshrink solutions Insulate, ientify an protect your wires an cables
2 Shrink-Kon To insulate an protect cables ABB has you covere when it comes to insulation! - Easy to use - Heat shrinkable - Heavy, meium an thin wall proucts Shrink-Kon Thin Wall Tubing Manufacture from crosslinke Polyolefin, these proucts are use to insulate bare Sta-Kon an Color Keye connectors an splices. They also provie a egree of strain relief an may be use to harness wires. Available in cut pieces or reels. Feature Proucts Inclue: - Single wall non-line 2:1 an 3:1 thin wall tubing - 3:1 an 4:1 ual wall ahesive line thin-wall PKG series provies excellent flexibility with environmental sealing capability - Transparent heat shrink tubing for use on power connections an ata connections - Zero Halogen an flame retarant version for use in containe areas Thick Wall Shrink-Kon Heat-Shrinkable Insulators When it comes to moisture-proofing connections an terminations, ABB s heat-shrinkable tubing, cable breakouts an en caps have proven themselves over years of service to the inustry. Mae of thermally stabilize cross-linke polyolefin, these heat-shrinkable insulators can be use over lea, steel, aluminum, copper, stanar plastic, an elastomeric insulating materials. ABB heat-shrinkable insulators are esigne to be easy to use. They provie an appropriate level of insulation an abrasion protection. Shrink-Kon Meium Wall Tubing More flexible than heavy-wall proucts, with excellent resistance to impact an abrasion. - Seals an protects cable splices an terminations - Thermoplastic ahesive liner guarantees complete environmental protection an insulation Thomas & Betts - A Member of the ABB Group Since June 2012, Thomas & Betts (T&B) is a Member of the ABB Group. ABB is a leaing power an automation technology group, active in more than 100 countries with about employees worlwie. With Thomas & Betts, this portfolio will is now complete with the following prouct lines an flagship brans: - Wire & Cable Management - Ty-Rap an Ty-Met cable ties, Shrink-Kon heat shrink, T&B Cabletray - Cable Protection Systems - nylon & metallic incl. brans: PMA, Aaptaflex, Kopex, Harnessflex - Low Power Connection & Control - Furse lightning & surge protection, Elastimol, Joslyn Hi-Voltage - Emergency lighting - emergency lighting, battery systems incl. VanLien, Kaufel, Emergi-Lite brans - Hazarous location proucts TS explosion proof light & boxes, Kopex-Ex conuits & fittings ABB I Catalogue Heat Shrink 1
3 2 Catalogue Heat Shrink I ABB
4 Table of Content Shrink-Kon - Heat shrink technologies Shrink-Kon - Heat Shrink Technologies Selection guie 4 Thin wall heat shrink tubing 6 Prouct reference structure 6 Type PLG - HSB boxes 7 Type PLG - flexible 7 Type PLG - pre-cut bags 10 Shrink-Kon Set 11 Type CMP - ual liste 12 Type MLP - flexible for high specifications 14 Type GYS - flexible green an yellow 16 Type GYS - HSB boxes 17 Type PIG - very flexible for highly contoure components 18 Type PIG - HSB boxes 19 Type PKG - flexible for moist environments 20 Type PKG - HSB boxes 22 Type KYN - semi-rigi transparent 23 Type VIT - highly flexible, flame retarant 24 Meium & thick wall heat shrink tubing an tooling 25 Type TBM - rate for 600V, 90 C continuous use 25 Type TBW - rate for 600V, 90 C continuous use 26 Low voltage kits up to 600V 27 Type TEB - cable breakouts 28 Type TEC - en caps 29 TBTA-ZH - self amalgamating tape 30 Hot Air Tool ABB I Catalogue Heat Shrink 3
5 Selection guie Shrink-Kon - Heat shrink technologies Prouct type General escription Typical application PLG/ PLG in HSB Boxes Multipurpose tube in flexible polyolefin General purpose, flexible heat shrink tubing for the protection, insulation an bunling of cables CMP Multipurpose tube in flexible polyolefin-ual liste Typical applications are mechanical an electrical insulation, corrosion protection, bunling, mechanical protection an much more MLP Multipurpose tube in flexible polyolefin-ual liste Typical applications are insulation, corrosion protection, component strain relief an connections in applications requiring the highest specifications (e.g. aeronautical an military) GYS/ GYS in HSB Boxes Stripe green an yellow, flexible polyolefin For ientifying an marking earthing connectors an cables PIG/ PIG in HSB Boxes Very flexible polyolefin, high shrink ratio For highly contoure components with large variations. Green an yellow for earthing applications PKG/ PKG in HSB Boxes Flexible polyolefin, High shrink ratio, ahesive bons to plastics, rubber, neoprene, steel an polyethylene Ahesive-line heat shrink tubing ieal for a moisture-resistant insulation KYN High specifications, semi-rigi Kynar * heat shrink tubing with excellent mechanical an electrical insulation performance Ieal for specific applications where mechanical an chemical protection are require. Enables see through inspections VIT High flexibility Viton ** fluoroelastomer for enhance protection in extreme electrical, chemical an thermal environments Its specificity make it the prouct of choice for heavy-uty conitions e.g. sensors in vehicle engine compartments TBM Meium heat shrink tubing ieal for the protection of cable joints an terminations in low voltage power applications For a variety of low voltage applications where lighter weight an greater flexibility are important TBW Thick wall heat shrink ieal for unergroun low voltage power applications an terminations This heavy wall prouct provies maximum reliability for insulating an protecting cable joints VMS (Low voltage kits) Meium an heavy wall cable jointing kit for polymeric insulate cables Low voltage jointing applications TEB Meium an heavy wall ahesive line heat shrink cable breakouts To insulate an seal low voltage cable TEC Meium an heavy wall ahesive line heat shrink en caps To seal an protect cable-ens against the ingress of moisture an contamination TBTA-ZH (Self amalgamating tape) Self-amalgamating tape which provies a thick insulating layer Flawless electrical stability an for long term resistance to moisture penetration * Kynar is a registere traemark of ATOFINA ** Viton is a registere traemark of upont e Nemours *** except transparent version 4 Catalogue Heat Shrink I ABB
6 Shrink ratio Temperature range Flame rating Certification(s) Single wall 2:1-55 C to +135 C Flame retarant*** Single wall 2:1-55 C to +135 C Flame retarant*** UL, CSA Single wall 2:1-55 C to +135 C Flame retarant*** UL, CSA, MIL Single wall 2:1-55 C to +135 C Flame retarant MIL Single wall 3:1-55 C to +135 C Flame retarant*** MIL ual wall 3:1 an 4:1-55 C to +110 C (outer jacket) Flame retarant*** Non polyolefin: crosslinke polyvinyliene fluorie (Kynar *) 2:1-55 C to +175 C High flame retarancy MIL Non polyolefin: crosslinke fluoroelastomer (Viton **) 2:1-55 C to +220 C High flame retarancy MIL Meium wall 3:1-55 C to +110 C Non Flame retarant Thick wall 3:1-55 C to +110 C Non Flame retarant Meium an thick wall 3:1-55 C to +110 C Non Flame retarant Meium an thick wall >2:1-55 C to +100 C Non Flame retarant Meium an thick wall >2:1-55 C to +100 C Non Flame retarant EPR base tape 1:3-55 C to +105 C Flame retarant ABB I Catalogue Heat Shrink 5
7 Prouct reference structure Shrink-Kon - Thin wall heat shrink tubing Prouct Reference: as supplie in thousanths of an inch XXXX PLG A Type of heat shrink Colour Packaging type* PLG = flexible CMP = ual liste MLP = flexible for high specifications GYS = flexible green an yellow PIG = very flexible for highly contoure components PKG = flexible for moist environments KYN = semi-rigi transparent VIT = highly flexible, flame retarant 0 = black (stanar) 1 = brown 2 = re 3 = orange 4 = yellow 5 = green 6 = blue 7 = purple 8 = grey 9 = white C = transparent E = green / yellow See prouct page for colour availability A B BG C E = 1,22 m cut lengths = reels = reels = 0,6 m cut lengths = box = mini-reels * Not necessary for PLG-HSB boxes 6 Catalogue Heat Shrink I ABB
8 Type PLG - HSB boxes Shrink-Kon - Thin wall heat shrink tubing - PLG heat shrink tubing in a compact, hany size box use for electrical maintenance an repair - Convenient amount of heat shrink, for small users - Offere in 10 sizes to cover a heat shrink range from Ø 1.2 mm to Ø 25.4 mm - Stackable boxes for easy storage - Flexible, rapi shrinkage, non-melting for effective electrical insulation - Flame retarant - Available colours: see below (see page 6 for prouct reference structure) Thin Shrink ratio 2:1 Tube characteristics Single wall Temperature range -55 C to +135 C Shrinking temperature +110 C Crosslinke polyolefin IP60 Stanar colour Black Other properties Silicone, Camium an Lea free Transparent version: Halogen free Prouct Ref. Fully recovere before shrinking z w [inch] [mm] [mm] [mm] [mm] [m] HSB HSB HSB HSB HSB HSB HSB HSB HSB HSB Length per box For other colours a colour suffix to Prouct Reference: 1 = brown, 2 = re, 4 = yellow, 5 = green, 6 = blue, 8 = grey, 9 = white an C = transparent 2:1 z w ABB I Catalogue Heat Shrink 7
9 Type PLG - flexible Shrink-Kon - Thin wall heat shrink tubing - Multi-purpose use for insulation, bunling, ientification, strain relief an much more - Heat shrink tubing with 15 nominal s to enclose components from Ø 1.2 mm to Ø mm - Flame retarant - Flexible, rapi shrinkage, non melting for effective electrical insulation - Available colours: see below (see page 6 for prouct reference structure) - Special colours available on request Thin Shrink ratio 2:1 Tube characteristics Single wall Tube length 1.22 m Temperature range -55 C to +135 C Shrinking temperature +110 C Crosslinke polyolefin IP60 Stanar colour Black Other properties Silicone, Camium an Lea free Transparent version: Halogen free Prouct Ref. Fully recovere before shrinking Length per box z w [inch] [mm] [mm] [mm] [mm] [pieces 1.22m] PLG46-0-A PLG63-0-A PLG93-0-A PLG125-0-A PLG187-0-A PLG250-0-A PLG375-0-A PLG500-0-A PLG750-0-A PLG A PLG A PLG A PLG A PLG A PLG A For other colours a colour suffix to Prouct Reference: 0 = black, 2 = re, 4 = yellow, 6 = blue, 9 = white an C = transparent For brown (-1), green (-5) an grey (-8) please contact your Sales Office for availability. 2:1 z w 8 Catalogue Heat Shrink I ABB
10 Prouct Ref. Fully recovere before shrinking z w [inch] [mm] [mm] [mm] [mm] [m] PLG46-0-B* PLG63-0-B* PLG93-0-B* PLG125-0-B* PLG187-0-B* PLG250-0-B* PLG375-0-B* PLG500-0-B* PLG750-0-B* PLG B* PLG B* PLG B* PLG B* PLG B* PLG B* PLG46-0-E PLG63-0-E PLG93-0-E PLG125-0-E PLG187-0-E PLG250-0-E PLG375-0-E PLG500-0-E PLG750-0-E PLG E PLG E PLG E PLG E Length per reel For other colours a colour suffix to Prouct Reference: 1 = brown, 2 = re, 4 = yellow, 5 = green, 6 = blue, 8 = grey, 9 = white an C = transparent * B-reels only available in black (-0) 2:1 z w ABB I Catalogue Heat Shrink 9
11 Type PLG - pre-cut bags Shrink-Kon - Thin wall heat shrink tubing - The Shrink-Kon Pre-cut packs of PLG heat shrink are available to replenish the Shrink-Kon Set or for use on isplays - 9 ifferent expane s - 6 ifferent colours - Packe in small quantities - Flexible, rapi shrinkage, non-melting for effective electrical insulation - Flame retarant - Available colours: see below (see page 6 for prouct reference structure) - Selling unit 1 bag - MOQ 10 bags Thin Shrink ratio 2:1 Tube characteristics Single wall Temperature range -55 C to +135 C Shrinking temperature +110 C Crosslinke polyolefin IP60 Other properties Silicone, Camium an Lea free Transparent version: Halogen free Prouct Ref. as supplie Fully recovere before shrinking Colour Length Quantity z w [inch] [mm] [mm] [mm] [mm] [mm] [cm] [pieces/ bag] PLG63-0-5R Black 5 50 PLG63-C-5R Transparent 5 50 PLG93-0-5R Black 5 50 PLG93-C-5R Transparent 5 50 PLG R White PLG R Yellow PLG125-C-10R Transparent PLG R Black PLG R Black PLG R Blue 5 40 PLG R Yellow 5 40 PLG187-C-5R Transparent 5 40 PLG R Blue PLG R Black PLG R White 5 40 PLG R Yellow 5 40 PLG R Black PLG R Blue PLG R Re PLG R Black 18 8 PLG R Blue PLG R Black 18 6 PLG R Black 18 3 Other imensions or colours available upon request. 2:1 z w 10 Catalogue Heat Shrink I ABB
12 Shrink-Kon Set Shrink-Kon - Thin wall heat shrink tubing - A kit comprising PLG heat shrink with or without hot air tool in a hany carry case - Maintenance an repair, research an evelopment, small series manufacture an much more - 9 ifferent expane s - 6 ifferent colours - 23 types - Flame retarant - Case mae from shock-resistant plastic - All types available in refill packages - Prouct Ref.: SK-1400GTG (with GR121) - Prouct Ref.: SK-1400GTG-UK (with GR321) - Prouct Ref.: SK-1400G (without hot air tool) Thin Shrink ratio 2:1 Tube characteristics Single wall Temperature range -55 C to +135 C Shrinking temperature +110 C Crosslinke polyolefin IP60 Other properties Silicone, Camium an Lea free Transparent version: Halogen free Set contents Prouct Ref. as supplie Fully recovere before shrinking Colour Length Quantity z w [inch] [mm] [mm] [mm] [mm] [cm] [pieces] PLG ,6 0,8 0,20 0,4 Black 5 20 PLG63-C ,6 0,8 0,20 0,4 Transparent 5 20 PLG93-C ,4 1,2 0,25 0,5 Transparent 5 20 PLG ,4 1,2 0,25 0,5 Black PLG125-C 1 8 3,2 1,6 0,25 0,5 Transparent PLG ,2 1,6 0,25 0,5 Yellow PLG ,2 1,6 0,25 0,5 White PLG ,2 1,6 0,25 0,5 Black PLG187-C ,8 2,4 0,25 0,5 Transparent 5 10 PLG ,8 2,4 0,25 0,5 Yellow 5 10 PLG ,8 2,4 0,25 0,5 Blue 5 20 PLG ,8 2,4 0,25 0,5 Black PLG ,4 3,2 0,30 0,6 Yellow 5 16 PLG ,4 3,2 0,30 0,6 Blue PLG ,4 3,2 0,30 0,6 White 5 16 PLG ,4 3,2 0,30 0,6 Black PLG ,5 4,8 0,30 0,6 Blue PLG ,5 4,8 0,30 0,6 Black 18 4 PLG ,7 6,4 0,40 0,6 Re 10 6 PLG ,7 6,4 0,40 0,8 Black 18 4 PLG ,0 9,5 0,40 0,8 Blue 10 4 PLG ,0 9,5 0,40 0,8 Black 18 4 PLG ,4 12,7 0,45 0,9 Black :1 z w ABB I Catalogue Heat Shrink 11
13 Type CMP - ual liste Shrink-Kon - Thin wall heat shrink tubing - Typical applications are mechanical an electrical insulation, corrosion protection, bunling, mechanical protection an much more - Internal s from 1.2 mm to 25,4 mm - Flame retarant - Flammability per UL The tubing is marke - Available colours: see below (see page 6 for prouct reference structure) Thin Shrink ratio 2:1 Tube characteristics Single wall Tube length 1.22 m Temperature range -55 C to +135 C Shrinking temperature +110 C Crosslinke polyolefin IP60 Stanar colour Black Other properties Silicone, Camium an Lea free Transparent version: Halogen free 2:1 z w * E * Transparent version not UL recognize 12 Catalogue Heat Shrink I ABB
14 Prouct Fully recovere before shrinking Length per box Ref. z w [inch] [mm] [mm] [mm] [mm] [pieces 1.22m] CMP46-0-A CMP63-0-A CMP93-0-A CMP125-0-A CMP187-0-A CMP250-0-A CMP375-0-A CMP500-0-A CMP750-0-A CMP A For other colours a colour suffix to Prouct Reference: 0 = black, 2 = re, 4 = yellow, 6 = blue, 9 = white an C = transparent Prouct Ref. Fully recovere before shrinking z w [inch] [mm] [mm] [mm] [mm] [m] CMP46-0-BG* CMP63-0-BG* CMP93-0-BG* CMP125-0-BG* CMP187-0-BG* CMP250-0-BG* CMP375-0-BG* CMP500-0-BG* CMP750-0-BG* CMP BG* CMP BG* CMP BG* CMP46-0-E CMP63-0-E CMP93-0-E CMP125-0-E CMP187-0-E CMP250-0-E CMP375-0-E CMP500-0-E CMP750-0-E CMP E CMP E CMP E Length per reel E-reels: for other colours a colour suffix to Prouct Reference: 0 = black, 1 = brown, 2 = re, 4 = yellow, 5 = green, 6 = blue, 8 = grey, 9 = white an C = transparent *BG-reels only available in black (-0) ABB I Catalogue Heat Shrink 13
15 Type MLP - flexible for high specifications Shrink-Kon - Thin wall heat shrink tubing - Typical applications are insulation, corrosion protection, component strain relief an connections in applications requiring the highest specifications (e.g. aeronautical an military applications) - Internal s from 1.2 mm to 25.4 mm - ual Liste - Meets MIL-TL-23053/5 requirements, Class 1 an Class 2 - Weather UV-resistant - Goo chemical resistance - Flame retarant - Available colours: see below (see page 6 for prouct reference structure) Thin Shrink ratio 2:1 Tube characteristics Single wall Tube length 1.22 m Temperature range -55 C to +135 C Shrinking temperature +90 C Crosslinke polyolefin IP60 Stanar colour Black Other properties Silicone, Camium an Lea free Transparent version: Halogen free 2:1 z w E Catalogue Heat Shrink I ABB
16 Prouct Ref. Fully recovere before shrinking Length per box z w [inch] [mm] [mm] [mm] [mm] [pieces 1.22m] MLP46-0-A MLP63-0-A MLP93-0-A MLP125-0-A MLP187-0-A MLP250-0-A MLP375-0-A MLP500-0-A MLP750-0-A MLP A For other colours a colour suffix to Prouct Reference: 0 = black, 2 = re, 4 = yellow, 6 = blue, 9 = white an C = transparent Prouct Ref. Fully recovere before shrinking z w [inch] [mm] [mm] [mm] [mm] [m] MLP46-0-BG* MLP63-0-BG* MLP93-0-BG* MLP125-0-BG* MLP187-0-BG* MLP250-0-BG* MLP375-0-BG* 3/ MLP500-0-BG* MLP750-0-BG* MLP BG* MLP46-0-E MLP63-0-E MLP93-0-E MLP125-0-E MLP187-0-E MLP250-0-E MLP375-0-E 3/ MLP500-0-E MLP750-0-E MLP E E-reels: for other colours a colour suffix to Prouct Reference: 0 = black, 2 = re, 4 = yellow, 6 = blue, 9 = white an C = transparent *BG-reels only available in black (-0) Length per reel ABB I Catalogue Heat Shrink 15
17 Type GYS - flexible green an yellow Shrink-Kon - Thin wall heat shrink tubing - For ientifying an marking earthing connectors an cables - Mechanical an electrical insulation, corrosion protection - Internal s from 3.2 mm to 25.4 mm - Flame retarant - Meets MIL-TL-23053/5 requirements, Class 1 an Class 2 (see page 6 for prouct reference structure) Thin Shrink ratio 3:1 Tube characteristics Single wall When sol in cut lengths Tube length 1.22m Temperature range -55 C to +135 C Shrinking temperature +90 C Crosslinke polyolefin IP60 Stanar colour Green / Yellow stripe Other properties Silicone, Camium an Lea free Prouct Ref. Fully recovere before shrinking z w Length per mini-reel Length per box [inch] [mm] [mm] [mm] [mm] [m] [pieces 1.22m] GYS125-E-A GYS187-E-A GYS250-E-A GYS375-E-A GYS500-E-A GYS750-E-A GYS1000-E-A GYS125-E-E GYS187-E-E GYS250-E-E GYS375-E-E GYS500-E-E GYS750-E-E GYS1000-E-E :1 z w 16 Catalogue Heat Shrink I ABB
18 Type GYS - HSB boxes Shrink-Kon - Thin wall heat shrink tubing - For ientifying an marking earthing connectors an cables - GYS heat shrink in a compact, hany size box - Convenient amount of heat shrink, for small users - Offere in 7 sizes to cover a heat shrink range from 3.2 mm to 25.4 mm s - Stackable boxes for easy storage - Flame retarant - Meets MIL-TL-23053/5 requirements, Class 1 an Class 2 - Mechanical an electrical insulation, corrosion protection (see page 6 for prouct reference structure) Thin Shrink ratio 3:1 Tube characteristics Single wall Temperature range -55 C to +135 C Shrinking temperature +90 C Crosslinke polyolefin IP60 Stanar colour Green / Yellow stripe Other properties Silicone, Camium an Lea free Prouct Ref. Fully recovere before shrinking z w [inch] [mm] [mm] [mm] [mm] [m] GYS125-E GYS187-E GYS250-E GYS375-E GYS500-E GYS750-E GYS1000-E Length per box 3:1 z w ABB I Catalogue Heat Shrink 17
19 Type PIG - very flexible for highly contoure components Shrink-Kon - Thin wall heat shrink tubing - Heat shrink tubing to enclose highly contoure components with large variations. Provies mechanical an electrical protection - Meets UL 224 requirements - Internal s from 1.6 mm to 38.1 mm - Excellent mechanical strength - Resistant to common fluis an solvents - Flame retarant - Meets MIL-TL-23053/5 requirements, Class 1 an Class 2 (except green / yellow version) - Available colours: see below (see page 6 for prouct reference structure) - Special colours available on request Thin Shrink ratio 3:1 Tube characteristics Single wall Temperature range -55 C to +135 C Shrinking temperature +90 C Crosslinke polyolefin IP60 Stanar colour Black Other properties Silicone, Camium an Lea free Transparent version: Halogen free Prouct Ref. Fully recovere before shrinking z w [inch] [mm] [mm] [mm] [mm] [m] PIG B* PIG B* PIG B* PIG B* PIG B* PIG B* PIG B* PIG B* PIG B* PIG E** PIG E PIG E PIG E PIG E PIG E PIG E PIG E PIG E * B-reels only available in black (-0) ** Not available in green / yellow E-reels: for other colours a colour suffix to Prouct Reference: 0 = black, 2 = re, 4 = yellow, 6 = blue, 9 = white, C = transparent an E = green / yellow stripe Length per reel 3:1 z w 18 Catalogue Heat Shrink I ABB
20 Type PIG - HSB boxes Shrink-Kon - Thin wall heat shrink tubing - PIG heat shrink in a compact, hany size box - Workshop, installation, laboratory an much more - Heat shrink tubing to enclose highly contoure components with large variations. Provies mechanical an electrical protection - Convenient amount of heat shrink, for small users - Offere in 8 sizes to cover a heat shrink range from Ø 1.6 mm to Ø 25.4 mm - Stackable boxes for easy storage - Meets UL 224 requirements - Excellent mechanical strength - Resistant to common fluis an solvents - Flame retarant - Meets MIL-TL-23053/5 requirements, Class 1 an Class 2 (except green / yellow version) - Available colours: see below (see page 6 for prouct reference structure) - Special colours available on request Thin Shrink ratio 3:1 Tube characteristics Single wall Temperature range -55 C to +135 C Shrinking temperature +90 C Crosslinke polyolefin IP60 Stanar colour Black Other properties Silicone, Camium an Lea free Transparent version: Halogen free Prouct Ref. Fully recovere before shrinking z w [inch] [mm] [mm] [mm] [mm] [m] PIG * PIG * PIG PIG PIG PIG PIG PIG Length per box * Not available in green / yellow E-reels: for other colours a colour suffix to Prouct Reference: 0 = black, 2 = re, 4 = yellow, 6 = blue, 9 = white, C = transparent an E = green / yellow stripe 3:1 z w ABB I Catalogue Heat Shrink 19
21 Type PKG - flexible for moist environments Shrink-Kon - Thin wall heat shrink tubing - Crosslinke moifie Polyolefin with thermoplastic ahesive lining - Particularly suitable for corrosion an amp protecte casings as well as highly contoure components - Flame retarant - Moisture resistant, goo chemical resistance - High mechanical stability - The high shrink ratio an flexibility of this range allows the user maximum coverage with minimal parts - The ahesive lining bons to plastic, rubber, neoprene, steel an polyethylene - Available colours: see below (see page 6 for prouct reference structure) Thin Shrink ratio 3:1 Tube characteristics Single wall Temperature range -55 C to +110 C Shrinking temperature +95 C Crosslinke polyolefin IP60 Stanar colour Black Other properties Silicone, Camium an Lea free Transparent version: Halogen free Prouct Ref. as supplie Fully recovere before shrinking Length per reel Quantity per box z w [mm] [mm] [mm] [mm] [m] [pieces 0.6 m] PKG B PKG B PKG B PKG B PKG B PKG B PKG B PKG C PKG C PKG C PKG C PKG C PKG C PKG C For other colours a colour suffix to Prouct Reference: 0 = black an C = transparent 3:1 z w 20 Catalogue Heat Shrink I ABB
22 Type PKG - flexible for moist environments Shrink-Kon - Thin wall heat shrink tubing - Crosslinke moifie Polyolefin with thermoplastic ahesive lining - Particularly suitable for corrosion an amp protecte casings as well as highly contoure components - Flame retarant - Moisture resistant, goo chemical resistance - High mechanical stability - The high shrink ratio an flexibility of this range allows the user maximum coverage with minimal parts - The ahesive lining bons to plastic, rubber, neoprene, steel an polyethylene Thin Shrink ratio 4:1 Tube characteristics ual wall When sol in cut lengths Tube length 0.6 m Temperature range -55 C to +110 C (outer jacket) Shrinking temperature +95 C Crosslinke polyolefin with ahesive lining IP65 Stanar colour Black Other properties Silicone, Camium an Lea free Prouct Ref. as supplie Fully recovere before shrinking Length per reel Quantity per box z w [mm] [mm] [mm] [mm] [m] [pieces 0.6 m] PKG B PKG B PKG B PKG B PKG B PKG B PKG B PKG C PKG C PKG C PKG C PKG C PKG C PKG C Only available in black (-0) 4:1 z w ABB I Catalogue Heat Shrink 21
23 Type PKG - HSB boxes Shrink-Kon - Thin wall heat shrink tubing - PKG heat shrink in a compact, hany size box - Convenient amount of heat shrink, for small users - Particularly suitable for corrosion an amp protecte casings as well as highly contoure components - Offere in 6 sizes to cover a heat shrink range from Ø 3.0 mm to Ø 24.0 mm - Stackable boxes for easy storage - The ahesive lining bons to plastic, rubber, neoprene, steel an polyethylene - Flame retarant - Moisture resistant - Available colours: see below (see page 6 for prouct reference structure) Thin Shrink ratio 3:1 Tube characteristics ual wall Temperature range -55 C to +110 C (outer jacket) Shrinking temperature +95 C Crosslinke polyolefin with ahesive lining IP65 Stanar colour Black Other properties Silicone, Camium an Lea free Prouct Ref. as supplie Fully recovere before shrinking z w [mm] [mm] [mm] [mm] [m] PKG PKG PKG PKG PKG PKG Length per box For other colours a colour suffix to Prouct Reference: 0 = black an C = transparent 3:1 z w 22 Catalogue Heat Shrink I ABB
24 Type KYN - semi-rigi transparent Shrink-Kon - Thin wall heat shrink tubing - In areas of heavy mechanical loas, high temperatures an chemical stress. Insulation in ensely packe wiring, in heating elements an much more - Internal s from 1.2 mm to 25.4 mm - High mechanical strength - Excellent electrical insulation performance - High flame retarancy - Highly abrasion an cut resistant - Resistant to iesel - Very goo resistance against chemicals an solvents - Meets MIL-TL-23053/8 requirements Thin Shrink ratio 2:1 Tube characteristics Single wall When sol in cut lengths Tube length 1,22 m Temperature range -55 C to +175 C Shrinking temperature +175 C Crosslinke an rigi Polyvinyliene Fluorie (Kynar *) IP60 Stanar colour Transparent Other properties Silicone, Camium, Lea an Halogen free * registere traemark of ATOFINA Prouct Ref. as supplie Fully recovere before shrinking Length per reel Quantity per box z w [inch] [mm] [mm] [mm] [mm] [m] [pieces 1.22m] KYN46-C-A KYN63-C-A KYN93-C-A KYN125-C-A KYN187-C-A KYN250-C-A KYN375-C-A KYN500-C-A KYN750-C-A KYN1000-C-A KYN46-C-B KYN63-C-B KYN93-C-B KYN125-C-B KYN187-C-B KYN250-C-B KYN375-C-B KYN500-C-B KYN750-C-B KYN1000-C-B :1 z w ABB I Catalogue Heat Shrink 23
25 Type VIT - highly flexible, flame retarant Shrink-Kon - Thin wall heat shrink tubing - High flexibility makes it suitable even uner heavy-uty conitions e.g. sensors in vehicle engine compartments - Excellent strength an resistance against corrosive fluis even at high temperatures - Internal s from 3.2 mm to 38.0 mm - Offers excellent resistance to aggressive fuels an chemicals - High flame retarancy - Meets MIL-TL-23053/13 requirements Thin Shrink ratio 2:1 Tube characteristics Single wall Temperature range -55 C to +220 C Shrinking temperature +175 C Viton *, Crosslinke fluoroelastomer IP60 Stanar colour Black Other properties Silicone, Camium an Lea free *Viton is a registere traemark of upont. Prouct Ref. as supplie Fully recovere before shrinking Length per reel Quantity per box z w [inch] [mm] [mm] [mm] [mm] [m] [pieces 0.6m] VIT125-0-B VIT187-0-B VIT250-0-B VIT375-0-B VIT500-0-B VIT750-0-B VIT B VIT B VIT125-0-C VIT187-0-C VIT250-0-C VIT375-0-C VIT500-0-C VIT750-0-C VIT C VIT C :1 z w 24 Catalogue Heat Shrink I ABB
26 Type TBM - rate for 600V, 90 C continuous use Shrink-Kon - Meium wall heat shrink tubing - High flexibility makes it suitable even uner heavy-uty conitions e.g. sensors in vehicle engine compartments - Excellent strength an resistance against corrosive fluis even at high temperatures - Internal s from 3.2 mm to 38.1 mm - Offers excellent resistance to aggressive fuels an chemicals - High flame retarancy - Meets MIL-TL-23053/13 requirements Meium Shrink ratio 3:1 Tube characteristics ual wall Temperature range -55 C to +110 C Shrinking temperature +120 C Crosslinke polyolefin with thermoplastic ahesive liner IP67 Stanar colour Black Other properties Silicone, Halogen, Camium an Lea free Prouct Ref. as supplie Fully recovere Length per bag Quantity per bag w [mm] [mm] [mm] [m] [pieces 1.22m] TBM TBM TBM TBM TBM TBM TBM TBM TBM TBM TBM on t stock at temperatures over 40 C. on t expose irectly to sun rays for long perios. 3:1 w ABB I Catalogue Heat Shrink 25
27 Type TBW - rate for 600V, 90 C continuous use Shrink-Kon - Thick wall heat shrink tubing - TBW is an excellent prouct for sealing an insulating cable splices, connections, terminations an jacket repairs. - The tubing is esigne to withstan the severe mechanical requirements of submersible an irect-burie installations - Low voltage power applications 600V - High resistance to abrasion, corrosion an chemicals - Excellent weatherability - 9 stanar sizes in thick wall: internal s from 8.9 mm to mm - Meets requirements of ESI Thick Shrink ratio 3:1 Tube characteristics ual wall Temperature range -55 C to +110 C Shrinking temperature +120 C Crosslinke polyolefin with thermoplastic ahesive liner IP67 Stanar colour Black Other properties Silicone, Halogen, Camium an Lea free Prouct Ref. as supplie Fully recovere Length per bag Quantity per bag w [mm] [mm] [mm] [m] [pieces 1.22m] TBW TBW TBW TBW TBW TBW TBW TBW TBW o not stock at temperatures over 40 C. o not expose irectly to sun rays for long perios. 3:1 w 26 Catalogue Heat Shrink I ABB
28 Low voltage kits up to 600V Shrink-Kon - Meium an Thick wall heat shrink tubing - VMS heat shrinkable sleeves (TBM an TBW) are suitable for jointing multi-core, polymeric insulate energy cables in the low voltage range - Quick, simple installation - Exceptionally goo electrical insulation an environmental protection - Goo mechanical loa-bearing ability - No maintenance time necessary - Unlimite storage life - Teste to IN / VE 0278 Part 1 an 3 Stanar Content - 1 Outer sleeve (TBW) - 4 Inner sleeves (TBM) for VMS2 to VMS9, 5 inner sleeves for VMS1 - Cleaning cloths - Abrasive cloth - Installation instructions Meium (TBM) an thick (TBW) Shrink ratio 3:1 Tube characteristics ual wall Temperature range -55 C to +110 C Shrinking temperature +120 C Crosslinke polyolefin with thermoplastic ahesive liner IP67 Stanar colour Black Other properties Silicone an Halogen free Prouct CONTENT PER KIT Réf. Wire range Inner Shrinkage Length Outer Shrinkage Length sleeves sleeve [mm 2 ] [pieces] [mm] [mm] [mm] [pieces] [mm] [mm] [mm] VMS VMS VMS VMS VMS VMS VMS :1 ABB I Catalogue Heat Shrink 27
29 Type TEB - cable breakouts Shrink-Kon - Meium an Thick wall heat shrink tubing - Cable Breakouts are esigne for the insulation an sealing of cable crutches - They offer extreme strain relief an mechanical protection - Ahesive line provies complete sealing - UV-resistant - They also provie goo insulation an resistance to common fluis an solvents Shrink ratio Tube characteristics Temperature range Shrinking temperature Stanar colour Other properties Meium an thick Various ual wall -55 C to +100 C +135 C Crosslinke polyolefin with thermoplastic ahesive liner IP67 Black Silicone, Halogen, Camium an Lea free Prouct Ref. as supplie Quantity Fully recovere recovere recovere Cable size Core Ø range Overall Ø range Finger Length L Finger Length I Number of breakouts [mm] [mm] [mm] [mm] [mm 2 ] [mm] [mm] [mm] [mm] [pieces] TEB2 2-BREAKOUTS TEB2-33/ TEB2-50/ TEB2-77/ TEB3 3-BREAKOUTS TEB3-38/ TEB3-60/ TEB3-80/ TEB3-110/ TEB3-125/ TEB4 4-BREAKOUTS TEB4-38/ TEB4-55/ TEB4-72/ TEB4-100/ TEB4-125/ I L 28 Catalogue Heat Shrink I ABB
30 Type TEC - en caps Shrink-Kon - Meium an Thick wall heat shrink tubing - En Caps are esigne to seal an to protect cable-ens against the ingress of moisture an contamination - They offer extreme strain relief an mechanical protection - Ahesive line provies complete sealing - They also provie optimal sealing an resistance to chemicals an solvents - UV-resistant Meium an thick Shrink ratio > 2:1 Tube characteristics ual wall Temperature range -55 C to +100 C Shrinking temperature +120 C Crosslinke polyolefin with thermoplastic ahesive liner IP67 Stanar colour Black Other properties Silicone, Halogen, Camium an Lea free Prouct Ref. as supplie Fully recovere length Cable Quantity L T [mm] [mm] [mm] [mm] [mm 2 ] [pieces] TEC15/ TEC25/ TEC36/ TEC63/ TEC80/ TEC102/ TEC124/ TEC148/ >2:1 T L ABB I Catalogue Heat Shrink 29
31 TBTA-ZH - self amalgamating tape Shrink-Kon - Heat shrink technologies - Self amalgamating tape - ABB TBTA-ZH tape provies a thick insulating layer with flawless electrical stability an a long term resistance to moisture penetration, which emans waterproofing - To repair an maintain cable sleeving up to 30 Kv - For installations, where open flame an heat may not be use - Excellent resistance to UV rays an Ozone - Easy to apply - no tools or heating require - Excellent protection at low temperatures TBTA-ZH must be stretche on application for the self-ahesive properties to be activate. Installation notes 1. The surface of the connection an the cable entry must be clean 2. TBTA-ZH shoul be use uner high tension as the stretching process activates the ahesive 3. By wrapping the TBTA-ZH tape aroun the cable, a seale casing is create 4. If a cable or pipe nees protection, the TBTA-ZH tape shoul be wrappe aroun itself twice at the beginning point an then shoul overlap throughout by 50%. This means that the tape will also stretch when the cable is uner tension 5. Finally, the surface (see point 4) shoul be covere once more using 100% tape overlap 6. At the en, the tape shoul be hel at the overlap point an torn off 7. To conclue the installation, the rippe off en shoul be presse firmly to close. Stretch ratio 3:1 Temperature range -55 C to +105 C EPR base tape IP67 Stanar colour Black Other properties Silicone, Halogen, Camium an Lea free Prouct Ref. Roll length With Thickness [m] [mm] [mm] TBTA-ZH TBTA-ZH TBTA-ZH TBTA-ZH :1 30 Catalogue Heat Shrink I ABB
32 Hot air tool Shrink-Kon - Heat shrink technologies The Hot Air Tool from ABB achieves a rapi shrink action. This tool is ieal for inustrial an military applications. Property Power Consumption Temperature Air Flow Static pressure max. Weight Electronics Typical performance 1400W +350 C to +500 C 350 / 500 l/min 1250 Pa 570 g Flicker-conformity Prouct Ref. GR121 GR321 WT992GR WT993GR WT994GR WT995GR WT996GR WT998GR WT999GR escription Hot Air Tool (European Plug an WT993GR nozzle) Hot Air Tool (UK Plug an WT993GR nozzle) Wie slot nozzle Reflector nozzle Reuction nozzle Ø 20mm Weling nozzle Overlap weling nozzle Soler sleeve reflector nozzle Glass protection nozzle WT992GR WT993GR WT994GR WT995GR WT996GR WT998GR WT999GR ABB I Catalogue Heat Shrink 31
33 Shrink-Kon - Heat shrink technologies Prouct name Mechanical Behaviour Operating temp. Shrink Ratio iameter Silicon free Camium + Lea free Non Halogen Test Metho PLG PE-Polyolefin Flexible -55 C to +135 C 2: mm / Yes Yes No* CMP PE-Polyolefin Flexible -55 C to +135 C 2: mm / Yes Yes No* MLP PE-Polyolefin Flexible -55 C to +135 C 2: mm / Yes Yes No* GYS PE-Polyolefin Flexible -55 C to +135 C 2: mm / Yes Yes No PIG PE-Polyolefin Very Flexible -55 C to +135 C 3: mm / /2 Yes Yes No PIG green yellow PE-Polyolefin Very Flexible -55 C to +135 C 3: mm / /2 Yes Yes No PIG clear PE-Polyolefin Very Flexible -55 C to +135 C 3: mm / /2 Yes Yes Yes PKG PE-Polyolefin Flexible -55 C to +110 C 3:1 / 4: mm / Yes Yes No KYN Kynar** PVF Semi-Rigi -55 C to +175 C 2: mm / Yes Yes No VIT Viton*** Flexible -55 C to +220 C 2: mm / /2 Yes Yes No TBM PE-Polyolefin Semi-Rigi -55 C to +110 C 3: mm Yes Yes Yes TBW PE-Polyolefin Semi-Rigi -55 C to +110 C 3: mm Yes Yes Yes LV-Kit PE-Polyolefin Semi-Rigi -55 C to +110 C 3:1 various Yes Yes Yes TEB PE-Polyolefin Semi-Rigi -55 C to +100 C various mm Yes Yes Yes TEC PE-Polyolefin Semi-Rigi -55 C to +100 C various mm Yes Yes Yes TBTA-ZH EPR-Tape Flexible -55 C to +105 C 1: mm Yes Yes Yes Prouct name Tensile Strength Secant Moulus Tensile Strength after heat aging Elongation after heat aging Low temp. Flexibility Test Metho IEC (6) ASTM- 882 (10) UL 224 (11) UL 224 (11), ISO 37 (13) ASTM Meth. C (27) ISO 37 (7) ef Stan (31) ASTM (3) ASTM (3) ASTM-412 (8) IEC (4) IEC (4) ASTM- 638M (9) ISO-188 (12) ISO-188 (12) ef Stan (31) ASTM- 638 (9) ASTM- 638 (9) PLG 15 MPa (6) 175 MPa max. (10) 12 MPa / 168h at 158 C (11) 300% / 168h at 158 C (11) oes not break at -55 C (27) CMP 15 MPa (6) 175 MPa max. (10) 12 MPa / 168h at 158 C (11) 300% / 168h at 158 C (11) oes not break at -55 C (27) MLP 17 MPa (6) 175 MPa max. (10) 13 MPa / 168h at 175 C (3) 300% / 168h at 175 C (3) oes not break at -55 C (27) GYS 15 MPa (6) 175 MPa max. (10) 12 MPa / 168h at 175 C (11) 300% / 168h at 175 C (11) oes not break at -55 C (27) PIG 17 MPa (6) 175 MPa max. (10) 13 MPa / 168h at 175 C (3) 300% / 168h at 175 C (3) oes not break at -55 C (27) PIG green yellow 15 MPa (6) 175 MPa max. (10) 12 MPa / 168h at 175 C (11) 300% / 168h at 175 C (11) oes not break at -55 C (27) PIG clear 20 MPa (6) 175 MPa max. (10) 18 MPa / 168h at 175 C (3) 500% / 168h at 175 C (3) oes not break at -55 C (27) PKG 15 MPa (6) 175 MPa max. 12 MPa / 168h at 158 C (4) 320% / 168h at 158 C (4) oes not break at -55 C (27) KYN 50 MPa (6) 750 MPa max. (10) 40 MPa / 168h at 158 C (4) 230% / 168h at 158 C (4) oes not break at -55 C (27) VIT 18 MPa (6) 70 MPa max. (10) 14 MPa / 168h at 158 C (4) 220% / 168h at 158 C (4) oes not break at -55 C (27) TBM 14.5 MPa (7) (8) 90MPa (31) 12MPa (3) (9) 500% / 168h at 150 C (3) (13) oes not break at -55 C (27) TBW 14.5 MPa (7) (8) 90MPa (31) -/- 500% / 168h at 150 C (3) (13) oes not break at -55 C (27) LV-Kit -/- 90MPa (31) 12MPa (3) (9) 500% (3) (9) oes not break at -55 C TEB 10 MPa (9) 80MPa (31) 9 MPa / 168h at 120 C (12) 250% / 168h at 120 C (12) -55 C TEC 12 MPa (9) 80MPa (31) 10 MPa / 168h at 120 C (12) 250% / 168h at 120 C (12) -55 C (27) TBTA-ZH 2.5 MPa (31) -/- -/- n.a. -/- * Transparent version is halogen free ** Kynar is a registere traemark of ATOFINA *** VITON is a registere traemark of upont **** Except transparent version ***** Outer Jacket only 32 Catalogue Heat Shrink I ABB
34 Spec. Gravity Longituinal Shrinkage Tensile Strength after Heatshock Elongation after Heatschock Ultimate Elongation Combustion behaviour / Flammability Shrink temp. ASTM- 792 ASTM (3) IEC (4) IEC (4) ISO/R 1183 (2) IEC (5) ASTM (3) EF Stan (1) ASTM (3) ASTM- 638 (9) A-I (1) ASTM- 638 (9) 1.3g / cm 3 (1) -10% (3) 13 MPa / 4h at 200 C (4) 400% / 4h at 200 C (4) 450% 1.3g / cm 3 (1) -10% (3) 13 MPa / 4h at 200 C (4) 400% / 4h at 200 C (4) 450% 1.3g / cm 3 (1) -5% (3) 19 MPa / 4h at 250 C (5) No cracking or flowing (3) 500% 1.3g / cm 3 (1) -10% (3) 14 MPa / 4h at 200 C (4) 400% / 4h at 200 C (4) 450% 1.3g / cm 3 (1) -5% (3) 19 MPa / 4h at 250 C (5) No cracking or flowing (3) 500% 1.3g / cm 3 (1) -10% (3) 14 MPa / 4h at 200 C (4) 400% / 4h at 200 C (4) 450% 1.0g / cm 3 (1) -5% (3) 15 MPa / 4h at 250 C (5) No cracking or flowing (3) 550% 1.3g / cm 3 (1) -15%(3:1) (3) /-18%(4:1) (3) 15 MPa / 4h at 200 C (4) 360% / 4h at 200 C (4) 400% 1.8g / cm 3 (1) -6% (3) 48 MPa / 4h at 250 C (4) 300% / 4h at 250 C (4) 450% 1.9g / cm 3 (1) -10% (3) 17 MPa / 4h at 300 C (4) 250% / 4h at 300 C (4) 520% 1.10g / cm 3 (1) +1% to -10% (3) 4h at 225 C No cracking or flowing (3) 600% 1.10g / cm 3 (1) +1% to -10% 4h at 225 C No cracking or flowing (3) 550% 1.10g / cm 3 +1% to -10% 4h at 225 C No cracking or flowing -/- 1.10g / cm 3-15% 6MPa (3) (9) 200% (3) (9) 300% 1.10g / cm 3-15% 6MPa (3) (9) 200% (3) (9) 300% -/- -/- -/- -/- 750% Storage temp. Resistance against Chemicals Water Absorption Fungus Resistance ielectric Strength UL 224 VW-1 (11), UL 224 (14) VE 0472 (19) IEC-243 (24) ASTM- 876 (15), ASTM- 635 (16) ISO-62 (20) VE 0303 Part 2 (25) FMVSS 302 (17), ESI (18) ASTM- 570 (21) ASTM- 149 (28) ASTM- 257 (32) ef Stan (31) ef Stan (31) ASTM- 267 Proc. A (33) Spec. Volume Resistance Flame retarant**** (14) (17) +110 C +30 C Goo 0.3% (19) Very goo 24kV / mm (25) 15 Ohm x cm 10. Flame retarant**** (14) (17) +110 C +30 C Goo 0.3% (19) Very goo 24kV / mm (25) 15 Ohm x cm 10. Flame retarant**** (14) (17) +90 C +30 C Goo 0.2% (19) Very goo 24kV / mm (25) 16 Ohm x cm 10. Flame retarant**** (14) +90 C +30 C Goo 0.2% (19) Very goo 24kV / mm (25) 16 Ohm x cm 10. Flame retarant**** (14) (17) +90 C +30 C Goo 0.2% (19) Very goo 24kV / mm (25) 16 Ohm x cm 10. Flame retarant**** (14) +90 C +30 C Goo 0.2% (19) Very goo 24kV / mm (25) 16 Ohm x cm 10. Passe per FMVSS 302 (14) (17) +90 C +30 C Goo 0.2% (19) Very goo 24kV / mm (25) 16 Ohm x cm 10. Flame retarant**** (15) (17) +95 C +30 C Goo 0.2% (19) Very goo 22kV / mm (25) 14 Ohm x cm 10. Flame retarant (11) +175 C +30 C Very goo 0.07% (19) Very goo 31.5kV / mm (25) 13 Ohm x cm 10. Flame retarant (33) +175 C +30 C Very goo 0.2% (19) Very goo 16kV / mm (25) 13 Ohm x cm 10. Non Flame retarant +120 C +30 C Goo 0.2% (21) Very goo 20kV / mm (24) (28) 16 Ohm x cm 10. Non Flame retarant +120 C +30 C Goo 0.2% (21) Very goo 20kV / mm (28) 16 Ohm x cm 10. Non Flame retarant +120 C +30 C Goo 0.2% Very goo 20kV / mm 16 Ohm x cm 10. Non Flame retarant (18) +135 C +30 C Goo 1% (20) Very goo 12kV / mm 11 Ohm x cm 10. Non Flame retarant +120 C +30 C Goo 1% (20) Very goo 12kV / mm (24) 12 Ohm x cm 10. Flame retarant n.a. +30 C Goo 0.06% (31) Very goo 30kV / mm (31) n.a. ABB I Catalogue Heat Shrink 33
Loom & Tubing. Call or Fax:
Call 905.820.6150 or 1.800.363.1588 Fax: 905.820.6142 Email: sales@techspan.ca Loom & Tubing What s New? Expandable Braided Loom High Temperature Fiber Glass Sleeving Convoluted Tubing/Split Loom on Spools
More informationHeat Shrinkable Tubing
Heat Shrinkable Tubing Wherever you find electricity you will find Thomas & Betts Thomas & Betts is a world leader in the manufacture and supply of electrical accessories for commercial and industrial
More informationPRODUCTS FOR THE HYDRAULICS INDUSTRY
PROUCTS FOR THE HYRAULICS INUSTRY SPIRALGUAR SPIRALGUAR High Performance Hose an Cable Protection How to calculate quantity: Outsie iameter of hose Length (m) of hose Insie iameter of Spiralguar X to be
More informationHeat-Shrinkable Tubing
H-Tap Insulating Covers (Hard Covers) Interlocking insulating covers for H-type compression taps Easy installation: place the H-Tap in the cover and snap the cover closed Consult your Regional Sales Office
More informationInstallation Devices 4
Installation Devices 4 4.1 Tapes HelaTape Flex - Vinyl Electrical Tapes HelaTape Wrap - Vinyl Tapes HelaTape Shield - Conductive Tapes HelaTape Flex 15 - All Purpose Vinyl Insulating Tape HelaTape Flex
More informationInstallation device. HelaTape. Electrical tapes for sealing, insulation and bundling of cable and conduits.
Electrical tapes for sealing, insulation and bundling of cable and conduits. HellermannTyton offers a wide range of PVC and rubber tapes for sealing, insulation and bundling of cable and conduits. PVC-
More informationFebruary Heat shrinkable tubing Insulate, identify and protect your cables
February 2017 Heat shrinkable tubing Insulate, identify and protect your cables Protect against moisture, corrosion and abrasion ABB has you covered when it comes to insulation Easy to use Heat shrinkable
More informationFAX FAX
2 seals on eman HERCULES SEALS ON EMAN provies a wie selection of custom, cost effective sealing solutions using avance rapi-prototype technology. The programmable CNC prouction cell can manufacture both
More informationHeat-Shrinkable Tubing
H-Tap Insulating Covers (Hard Covers) Interlocking insulating covers for H-type compression taps Easy installation: place the H-Tap in the cover and snap the cover closed Consult your Regional Sales Office
More informationH e a t s h r i n k P r o d u c t G u i d e
P o w e r P r o d u c t s H e a t s h r i n k P r o d u c t G u i d e Introduction HellermannTyton is a world leader in providing systems and solutions for heatshrink applications. HellermannTyton utilises
More informationFULL COMPLEMENT NEEDLE BEARINGS
FULL OMPLEMENT NEELE EARINGS Technical features Full complement neele bearings These bearings are available with or without an inner ring from 12 bore size. Stanar complete bearings type NA have an inner
More informationPerma-Seal Terminals and Splices
Terminals and Splices terminals and splices provide a rugged environmentally sealed connection for wire sizes to 22 AWG. Perma-Seal insulates, protects and seals electrical connections from physical abuse,
More informationLS TUBE. Heat Shrink Technology
LS TUBE Heat Shrink Technology LS Tube, a division of LS Cable & System, covers a complete range of heat-shrinkable tubing products, all of which are developed to meet industry requirements, including
More informationCapacitance range: 100 pf to 0.22 mf (E12-values on request) Rated voltages:
olypropylene () Capacitors for ulse Applications with Metal oil Electroes, Schoopage Contacts, ouble-sie Metallization an Self-ealing Internal Series Connection for ighest Current Carrying Capability 1
More informationHeat Shrink Tubing Selection Guide Use our flow chart to find the correct heat shrink tubing for your particular application.
Technical Information Heat Shrink Tubing Selection Guide Use our flow chart to find the correct heat shrink tubing for your particular application. Begin your search in the flow chart at the START point.
More informationDETAIL SPECIFICATION SHEET INSULATION SLEEVING, ELECTRICAL, HEAT SHRINKABLE, POLYOLEFIN, FLEXIBLE, CROSSLINKED
INCH-POUND MIL-DTL-23053/5C 17 June 1996 SUPERSEDING MIL-I-23053/5B 01 May 1986 DETAIL SPECIFICATION SHEET INSULATION SLEEVING, ELECTRICAL, HEAT SHRINKABLE, POLYOLEFIN, FLEXIBLE, CROSSLINKED This specification
More informationWIMA FKP 4. Typical Applications. Construction. Packing. Mechanical Tests
WIMA K 4 olypropylene () Capacitors for ulse Applications with Metal oil Electroes, Schoopage Contacts an Self-ealing, Internal Series Connection for Increase Current Carrying Capability CM 1 mm to 37.
More informationProduct Range. Butterfly Valve Type
Prouct Range Butterfly Valve Type 567 ist of Abbreviations ANSI American National Stanar Institute ASTM American Society for Testing an Materials BS British Stanar IN eutsche Inustrie-Normen ISO International
More informationDETAIL SPECIFICATION SHEET INSULATION SLEEVING, ELECTRICAL, HEAT SHRINKABLE, CROSSLINKED CHLORINATED POLYOLEFIN, FLEXIBLE
INCH-POUND MIL-DTL-23053/1C 17 June 1996 SUPERSEDING MIL-I-23053/1B 01 May 1986 DETAIL SPECIFICATION SHEET INSULATION SLEEVING, ELECTRICAL, HEAT SHRINKABLE, CROSSLINKED CHLORINATED POLYOLEFIN, FLEXIBLE
More informationVariable area flowmeter DFM 165 to 350
ASV Stübbe GmbH & Co. KG Hollwieser Straße 5 D60 Vlotho Fon +9 (0) 57 33.7 990 Fax +9 (0) 57 33.7 99 00 www.asvstuebbe.e contact@asvstuebbe.e Variable area flowmeter DFM to 3 For all inustrial uses High
More informationPipe and Flange Protection
Pipe an Flange Protection Pipe Caps 78-82 Pipe Plugs 82-83 Flange Protection 84-89 77 Protect! Pipe an Flange Protection Moss offer a wie range of Plastic Protection Proucts for pipes an flanges. Our range
More information60.07 Style 233 Restrained Flexible Coupling For Dynamic Joint Deflection
Style 33 Restraine Flexible Coupling For Victaulic Bolte Split-Sleeve Proucts (VBSP) Style 33 carbon steel restraine couplings (formerly Depen-O-Lok FxF Moifie) provie a fully restraine, flexible pipe
More informationFOR EVERYTHING ENCLOSURE
FOR EVERYTHING ENCLOSURE PVC EDGE PROTECTOR Provies excellent protection for steel eges 9 styles available Simple to install SEE PAGES 498-499 DRAWER SLIDES Available in light, meium an heavy uty Full
More informationTable of Contents. 29 Clamping & Bundling Products 30 Adhesive Mounting Bases 31 Cradle Mounts 32 Cable Clamps
Table of Contents 1 Table of Contents 3 Conventional Cable Ties 4 Miniature Ties 5 Intermediate Ties 6 Standard Ties 8 Heavy Duty Ties 9 Extra Heavy Duty Ties 10 Ultra Heavy Duty Ties 11 Specialty Cable
More informationPressure Relief Valve Overflow Valve Type DHV 715 Type DHV 716 Type DHV 725
Pressure Relief Valve Overflow Valve Type DHV Type DHV Type DHV DIBt* approve DIBt* approve High repeating accuracy, with union sockets or spigot ens Print / The optimal monitoring valves Sizes up to Operating
More informationEngineered installation products Solutions for control panel applications
Engineered installation products Solutions for control panel applications 2 Engineered installation products Solutions for control panel applications Solutions for control panel applications ABB introduces
More informationPipe bracket spacing and support of pipelines
Pipe an support of pipelines General Pipe support for plastics pipes Plastic pipe systems shoul be installe using supports esigne for use with plastics an shoul then be installe taking care not to amage
More informationHigh Temperature Masking
Hig Temperature Masking Silicone Caps an Plugs (+300ºC) 92-96 Flexible PVC Caps an Plugs (+220ºC) 97-98 Paper Caps an Plugs (+205ºC) 99 EPM an TPR Caps an Plugs (+180ºC) 100-105 Masking Tapes, Hooks an
More informationDETAIL SPECIFICATION SHEET INSULATION SLEEVING, ELECTRICAL, HEAT SHRINKABLE, FLUORINATED ETHYLENE PROPYLENE, NON-CROSSLINKED
INCH-POUND 17 June 1996 SUPERSEDING MIL-I-23053/11B 01 May 1986 DETAIL SPECIFICATION SHEET INSULATION SLEEVING, ELECTRICAL, HEAT SHRINKABLE, FLUORINATED ETHYLENE PROPYLENE, NON-CROSSLINKED This specification
More information60.08 Style 233S Restrained Flexible Coupling For Dynamic Joint Deflection
Style 33S Restraine Flexible Coupling Victaulic Bolte Split-Sleeve Proucts (VBSP) Style 33S stainless steel restraine couplings (formerly Depen-O-Lok FxF Moifie) provie a fully restraine, flexible pipe
More informationSECTION. Watertight & Dust-Tight Plugs & Connectors
SECTION Watertight & ust-tight Wetguard Product Line Section Contents LIFETIME Wetguard Plugs, Connectors & Straight Blade 2-Pole 3-Wire 2-Pole 3-Wire 3-Pole 4-Wire 3-Pole 3-Wire Non- 4-Pole 4-Wire Non-
More informationShrink-Kon. Heat-Shrinkable Tubing. Table of Contents
Table of Contents Overview...C2C3 Heavy-Wall...C4C9 Medium-Wall...C10 Thin-Wall...C11C16 Splice Insulators and Insulating Covers...C17C23 Installation Tools...C24 Installation Guidelines and Cross Reference...C25
More informationSUPPORT & PROTECTIVE PRODUCTS
06 76 Nylon Cable Ties 80 Mounting Bases & Installation Tools 83 Heat Shrink Tubing 88 Heat Guns & Torches 90 Tube and Loom SUPPORT & PROTECTIVE PRODUCTS 92 Clamps, Clips & Grommets PRODUITS DE FIXATION
More informationBEARINGS WITH CAGE - GUIDED NEEDLES
EARINGS WITH AGE - GUIE NEELES Technical features earings with cage - guie neeles ONSTRUTION The basic constructions of neele roller bearings are: 1 ) 10 ). Neele roller bearings with integral flanges
More informationMIZE WIRE (800)
SECTION 5 Flex-Guard Split Loom Flex-Guard Split Loom is black, durable polyethylene material split lengthwise. Split loom holds groups of wires in position and gives the wire excellent protection against
More informationAirfield Ground Lighting
Airfield Ground Lighting The Draka brand is part of the Prysmian Group, a world leader of the energy and telecom cables and systems industry, with sales of some 7 billion and more than 19,000 employees
More informationDeep groove ball bearings
Deep groove ball bearings 6200-2 J/C3 HC5 GJN Nomenclature 1 2 3 4 5 1. Seals, shiels & snap rings: 2. Cage esigns: 4. Suffix: RSH RS2 RSL R 2RSH 2RS2 2RSL 2R 2 NR Contact seal of synthetic rubber (NBR)
More informationZHPCG CK0226 POWER CABLE WIRE & CABLE
ZHPCG CK0226 POWER CABLE WIRE & CABLE ZHPCG CK0226 POWER CABLE WIRE & CABLE Application/Use Rail approved zero Halogen Power Cables, available as 750V or 1800V rated. ZHPCG cables are all Halogen free,
More informationASV sturdy and robust construction. DN 10 up to DN bar (PN 10) at 20 C. DMV 755: 1,0-9,0 bar DMV 765: 0,5-9,0 bar
Pressure Reucing Valve Type DMV Type DMV Print-No. / Design Size Max. Pressure Setting Range Pressure Setting Working Pressure Back lash Operating Security Maintenance Simple inline pipe connection ASV
More informationShrink Boots Straight, Long Tail, 90, 45 and USB for Series 811 Connectors
809S060, 809SL060, 809060, 809060 and 809SU060 Straight, Long Tail, 90, 45 and US for onnectors Protect Your able Harness with heat-shrinkable boots. These easy-to-use boots provide excellent electrical,
More informationISO 9001:2008 LOCKING ASSEMBLIES SHRINK DISCS KEYLESS RIGID COUPLINGS
OCKING ASSEMBIES SHRINK DISCS KEYESS RIGID COUPINGS Introuction ISO 9001:2008 CIMAX Metal Proucts Company & MAV S.p.A. A Unique Partnership In June 2011, CIMAX entere an exclusive agreement with MAV S.p.A.
More informationTying and fixing system. Cable ties 22. raw material colour U61X U60X. Black. Natural. Grey
Tying and fixing system 22 raw material colour U61X U60X Black Natural Grey 22 U61X U60X For tying of cables and conduits Complete product family for all kind of applications. Hand thread, easier mounting
More informationWiring Duct T1 Series - Slotted
Duct T1 Series - Slotted UL file E123572 T1 Series Gray Open Slot Rigid PVC (including cover) Catalog Standard Carton Package Quantity Price Catalog Single Piece Pkg Package Quantity Price T1-0506G 20
More informationProduct Number
Sealing and Grounding Cold Shrink cable accessory sealing kits are designed to seal the end of JCN cable. Use these kits when installing elbows or other cable accessories that do not include a jacket seal.
More informationCRANE, CONVEYOR, LIFT & REELING CABLES
CRANE, CONVEYOR, LIFT & REELING CABLES F-PVC Series... 158 F-TPECY Series...160 P Series...161 PR Series...162 PRRT Series... 164 PRVS Series...166 Reeling/Trailing Cable Enquiry Form...168 P: (09) 264
More information14 HH EAC/CTP CE RoHS-II conform
Outer jacket: Pressure extruded PUR mixture Inner jacket: Pressure extruded, gusset filling PUR mixture 12 cores or more: Bundles with optimized pitch length and pitch direction Conductor: Fine-wire strand
More informationAny inquiries, please feel free to contact or Caledonian
Caledonian Low Voltage cables to IEC 60502 Standard www.caledonian-cables.co.uk www.caledonian-cables.net 1 Addison Company Profile Caledonian. established in 1978.offers one of the most complete lines
More informationBimetal thermometers Index
Inex eneral information Prouct information With brass pocket page Inex 685 Brass pocket; Aluminium case 686 Brass pocket; 687 With brass probe page Brass probe; Aluminium case; Air uct thermometer 688
More informationMotor Lead Pigtail or V-Stub Splice 5380 Series For 5/8 kv Non-Shielded and Shielded Feeder Cables (Tape, Wire or UniShield Cables)
Motor Lead Pigtail or V-Stub Splice 5380 Series For 5/8 kv Non-Shielded and Shielded Feeder Cables (Tape, Wire or UniShield Cables) Instructions Kit Contents 3 Lug Covers 3 Cold Shrink Terminations 12
More information3M - A Global, Diversified Technology Company
3M - A Global, Diversified Technology Company Everyday, 3M people find new ways to make amazing things happen. Wherever they are, whatever they do, the company s customers know they can rely on 3M to help
More information60.03 Style 231 Non-Restrained Flexible Expansion Coupling
Style 31 Non-Restraine Flexible Victaulic Bolte Split-Sleeve Proucts (VBSP) Style 31 carbon steel expansion couplings (formerly Depen-O-Lok FxE) provie a non-restraine, flexible pipe joint that is esigne
More informationCOMPACT BEARING CR 2000
COMPACT BEARING CR 2000 Unreinforce elastomeric bearing loaable up to 20 N/mm² Bearing esign Contents Page Bearing esign formulae 2 Prouct escription 2 Shape factors 3 How to specify 3 Shear stiffness
More informationPSI Anti-Corrosion Tape
General information Technical specifications Requirement evaluation Application instructions Certificates PSI Anti-Corrosion Tape 8 Pipeline Accessories 85 The Systems PSI anti-corrosion tapes have been
More informationIncremental encoders Insulated through hollow shaft ø inch pulses per revolution programmable (interpolated system)
Features HS35P with insulate hollow shaft Robust inustrial encoer up to IP 67 protection Highly versatile fully programmable encoer Interchangeable bore size(s) using metal inserts Insulating sleeve to
More informationQuick Splice II 5451R. 25/28 kv Molded Rubber Cable Repair Splicing Kit Data Sheet. 1. Product Description. 2. Applications
Quick Splice II 5451R (CN) Cable (JCN) Cable Accessory Splice Jacket 25/28 kv Molded Rubber Cable Repair Splicing Kit Data Sheet 1. Product Description The 3M 5451R Quick Splice II is a 25/28 kv class
More informationVarnished Cambric Tape 3/4"X60' Features. Material, Color, and Finish. Dimensions and Weight. Long Description. Manufacturer Information
3804 South Street 75964-7263, TX Nacogdoches Phone: 936-569-7941 Fax: 936-560-4685 252060 Varnished Cambric Tape 3/4"X60' Minnesota Mining (3M) Catalog Number 252060 Manufacturer Minnesota Mining (3M)
More informationCable protection systems
Cable protection systems Poleon // Meleon // Meleon Pro Cable protection systems Reliable protection for cables In inustry, cables an wires are expose to exceptional loas. eat an col, tensile an compressive
More informationE2ER/E2ERZ. Reduce Failures From Cutting Oil Ingress. Features. Applications. Patent Pending Heat-Sealing Method
Oil-resistant Proximity Sensors Reuce Failures From Cutting Oil Ingress Fluororesin cable withstans cutting oil Sealing metho eliminates gaps at cable joints Resin filling blocks ingress IP67G* egree of
More informationH07RN-F TITANEX PREMIUM
New generation of flexible cables elastomer H07RN-F, born to release you from all the constraints. Thanks to its specific technology, it includes the properties of H07RN8-F; H07BN4-F; H07BB-F. Description
More informationINTRODUCTION. The plug-in connection on the cables and lightning arrestors, allows for easy installation and replacement.
INTRODUCTION The Power Systems 44 kv MiniSub TM is the most compact system at this voltage available. Utilizing a deadfront termination and lightning arrestor setup, it eliminates the line top or side
More informationOther materials are available on request. Operating conditions
Merkel U-Ring T 18 Merkel U-Ring T 18 Asymmetrical sealing lip POM back-up ring PUR profile ring Profile ring Coe Harness Polyurethane 95 AU V142 95 Shore A Fig. 1 Merkel U-Ring T 18 Back-up ring Polyacetal
More informationAngular contact ball bearings
Angular contact ball bearings 7200 BE CB Y HC5 Nomenclature 1 2 3 4 1. esign: 2. Clearance: 3. Cage esigns: B BE A E NR N2 2Z 2RS1 40 contact angle 40 contact angle, high capacity, all ISO corners Conra
More informationØ range <500 mm. Ø range >500 mm. Operating conditions. Surface quality. Surface roughness R a R max
Hyraulics Ro Seals Merkel U-Ring T 20 Merkel U-Ring T 20 Merkel U-Ring T 20 PUR profile ring Material range
More informationCorflex. Continuous Corrugated Aluminum Sheathed PL, MC and MV Industrial Cables. Introduction Applications... 3
Corflex Continuous Corrugated Aluminum Sheathed PL, MC and MV Industrial Cables Introduction................................. 2 Applications................................. 3 Corflex PL 300V Instrumentation
More informationNexans Network Solutions Div. Euromold
Catalogue 2012 Nexans Network Solutions Div. Euromold COMPANY PRESENTATION EUROMOLD Euromold is the leading European specialised designer, manufacturer and distributor of prefabricated cable accessories
More informationHepcoMotion. Shaft precision steel and aluminium shaft
HepcoMotion Shaft precision steel an aluminium shaft Introucing the HepcoMotion Precision Shaft Correct Shaft selection is vital if maximum performance is to be achieve from your linear system. Hepco Precision
More informationShyam Enterprises 5 HEAT EXCHANGERS
Shyam Enterprises HEAT EXCHANGERS 33 Heat Exchangers Introuction The overall heat transfer coefficient of borosilicate glass equipment compare favourably with many alternative process plant construction
More informationWIMA MKP-X2. Continuation. General Data
WIMA MKP-X2 Metallize Polypropylene (PP) RFI-Capacitors Class X2 PCM 7.5 mm to 27.5 mm Special Features Reliable self-healing igh egree of interference suppression ue to goo attenuation an low ESR Accoring
More informationPA6 PPmod (High Temp) PP (Standard)
P6 PPmod (High Temp) PP (Standard) P6 (Nylon) is ideal for applications that require a conduit with high impact and abrasion protection with outstanding chemical resistance. P6 (Nylon) conforms to FMVSS302,
More informationHighly Engineered Tooth and Pawl Design for Maximum Engagement MINIATURE (PAGE J37) INTERMEDIATE (PAGE J37)
MINIATURE HEAVY DUTY INTERMEDIATE EXTRA HEAVY DUTY STANDARD RELEASABLE TIES MOUNTING HEAD STRIPED TIES RESTRICTED BUNDLE IDENTIFICATION TIES MIL-SPEC TIES Ty-Fast Cable Ties are available in lengths from
More informationCast Resin Joints. Install and Forget
Install and Forget The new range of Rezi-Kon cast resin joints from Thomas & Betts provide a convenient and reliable solution for splicing and branching low voltage cables, in applications like street
More informationPSI HEAT SHRINK PRODUCTS -
PSI HEAT SHRINK PRODUCTS - CORROSION PROTECTION AND SEALING (SYSTEM CANUSA) COMPATIBILITY WITH ALL PIPE COATINGS IMPACT AND ABRASION-RESISTANT MATERIAL EASY INSTALLATION BY SHRINK ON WWW.PSI-PRODUCTS.COM
More informationDinosaur Flexible Wiring Duct
Dinosaur Flexible Wiring Duct Dinosaur self-adhesive flexible duct is ideal for transporting wiring to cabinet doors from control panel interiors (for that part of the cable run that leans against the
More informationCABLES FOR AUTOMOTIVE MARKET Sensor and multimedia cables. Catalogue
CABLES FOR AUTOMOTIVE MARKET Sensor and multimedia cables Catalogue Introduction Nexans has developed a range of special and customised cables for the automotive market. This cable range covers two main
More informationThe Ideal Locking Devices For Shaft-to-Hub Connections. Proven Design. Easy To Use
C-ROM Sizing Software ETP Keyless Shaft Mount Connections The Ieal ocking evices For Shaft-to-Hub Connections. ETP Connections are ieal for positioning an locking shaft components in a system. They are
More informationCable Accessories. Product Catalogue
Cable Accessories Product Catalogue 2017 2 P age REPL INTERNATIONAL REPL HAVE BEEN DESIGNING AND MANUFACTURING CABLE ACCESSORIES FOR USE ON ENERGY AND TELECOM CABLES FOR OVER 35 YEARS. WE SUPPLY OUR PRODUCTS
More informationQuadLube, SpreadLock Seal, ImpactTuff, DuraLube TM Spherical Plain Bearings
QuaLube, SpreaLock Seal, ImpactTuff, uralube TM Spherical Plain earings Innovative prouct features that provie unique performance avantages. High loa capacity, re-lubrication options, an patente esigns.
More information20 HUBER+SUHNER RADOX SOLAR
All our cables fully comply with the European directives 76/769/EWG, 2003/11/EG, 2000/53/EG, 2003/53/EG and 2002/95/EG (RoHS) and the requirements of REACH Nr. EC1907/2006. 20 RADOX SOLAR cables RADOX
More informationInstallation Devices. Date of issue: January 2014
Installation Devices 4 4.1 Connectors HelaCon series 4.2 Mounting Devices HelaCon Plus 198 HelaCon Easy 200 HelaCon Lux 202 Down light mounting SpotClip-I 203 device SpotClip-II 205 4.3 Cable Installation
More informationis the UK subsidary of Tele-Fonika Kable S.A., with offices and a warehouse centrally located in Leicestershire.
is the UK subsidary of Tele-Fonika Kable S.A., with offices and a warehouse centrally located in Leicestershire. We are a major supplier of housewiring, low voltage, power and fire resistant cables for
More informationyour reliable partner EAS -Compact K.490.V16.EN
ES -Compact K.490.V16.EN www..com We safeguar the movements of this worl Specialists for power transmission for more than a century mayr power transmission is one of the most traitional an yet most innovative
More informationInstallation Instruction Heatshrink Termination For 3 Core Polymeric Cables 7.2kV to 36kV
Installation Instruction Heatshrink Termination For 3 Core Polymeric Cables 7.2kV to 36kV * PLEASE READ INSTRUCTIONS THOROUGHLY BEFORE PROCEEDING * INDOOR OUTDOOR Download free QR code scanning software
More informationWire-thread inserts. Heavy-duty threads for series or repair
Wire-threa inserts Heavy-uty threas for series or repair The center of excellence for highperformance fastening technology KVT-Fastening is an expert for high-quality fastening applications an offers engineering
More informationa Nexans company Catalogue 2008
a Nexans company Catalogue 2008 EUROMOLD COMPANY PRESENTATION EUROMOLD Euromold is the leading European specialised designer, manufacturer and distributor of prefabricated cable accessories for medium
More informationCold Shrink Silicone Rubber Termination QT-III (With High-K Stress Relief)
Cold Shrink Silicone Rubber Termination QT-III (With High-K Stress Relief) Instruction Sheet IEEE Std. No. 48 1990 Class 1 Termination 5/8.7 kv Class 95 kv BIL Kit Contents: 3 Hi K, Tracking Resistant,
More informationAluminum and Steel Liquidtight Strain Relief Cord and Cable Connectors
Application Provide a liquidtight and strain relief termination for flexible type neoprene, hypalon, and PVC jacketed power or control cord and cable. For use in wet or dry locations sealing electrical
More informationHigh Voltage Copper, Smooth Aluminum Shield/Sheath
High Voltage Copper, Smooth Aluminum Shield/Sheath XLPE Insulation, HDPE Jacket, 69 kv - 138 kv Features True triple vertical extrusion system for optimum insulation concentricity, and excellent electric
More informationPictograms of the table head. Pictograms of the technical data
of the table hea l ength Colour Bouning iameter Wire rope size Plug Plug+screw Bore iameter oa, tensile strength Expansion range of the technical ata Material: Polyamie Material: Polyethylene Material:
More informationTriple row axial angular contact ball bearings
Triple row angular contact ball bearings Series DKLF Heavy Series Features Bearings of series DKLF with a bore iameter of 30 mm an 40 mm are available in a Heavy series. This allows the user to achieve
More informationMedium Voltage. Joints & Terminations
57 - Cold Shrink Joints Supporting Core Radially shrinkable elastomeric splice Semi-conductive layer High permitivity insulation layer 6.6/11/(12) kv 3M QS1000 is a one-piece cold shrink joint body manufactured
More informationSLIM-SPLIT-BEARING KUNSTSTOFF-METALL-FORMTEILE
SLIM-SPLIT-BEARING KUNSTSTOFF-METALL-FORMTEILE Publishe by KMF Kunststoff-Metall-Formteile GmbH Postweg 34-40 -73441 Bopfingen Phone 0736/7001 Fax 0736/7007 E-Mail info@kmf-bearings.e All rights reserve.
More informationSection 5. SYGEF Standard PVDF Piping System. Effective Jan. 16, See for updated info. P
Section 5 SYGEF Stanar PVF Piping System P0801084 Effective Jan. 16, 2012. See www.gfpiping.com for upate info. SYGEF Stanar Prouct Specification Material Color ensity Surface tension inear expansion coefficient
More informationHelaGuard. Non-Metallic Conduit & Fittings
HelaGuard Non-Metallic Conduit & Fittings HelaGuard Non-Metallic Conduit Systems Page HelaGuard Overview 3 Conduit Application Overview 4 Mounting & Removing HelaGuard Non-Metallic Fittings 5 HelaGuard
More informationENERGY. Solar Cables
ENERGY Solar Cables Contents TECSUN(PV) PV1-F Cables for Photovoltaics 3 Technical Data 4 Design Features 6 Selection and Ordering Data 6 TECSUN DUO (PV) Cables for Photovoltaics 7 Technical Data 8 Design
More informationT O K I S T A R L I G H T I N G I N S T R U C T I O N M A N U A L Advantage Series
T O K I S T A R L I G H T I N G I N S T R U C T I O N M A N U A L Avantage Series General escription Tokistar s Avantage Series is a 24 VAC lighting system using LE moules or rigi-loop xenon lamps. LEs
More information3M Cold Shrink QT-III Silicone Rubber Indoor Tubular Termination Kit
3M Cold Shrink QT-III Silicone Rubber Indoor Tubular Termination Kit With High-K Stress Relief For Tape Shield, Wire Shield and UniShield Cable 7622-T-110, 7624-T-110, 7625-T-110, 7626-T-110 Instructions
More informationKeyless Locking Devices
Keyless ocking evices IC 100 IC 100 s N/ 2 17 47 20 26 6 16 260 31 104 18 47 20 26 6 16 280 31 104 19 47 20 26 6 16 290 31 104 20 47 20 26 6 16 310 31 104 22 47 20 26 6 16 340 31 104 24 50 20 26 6 16 370
More information3M Electrical Tapes Product Selection Guide. Insulate & Protect. with Quality Tapes. Preliminary
3M Electrical Tapes Product Selection Guide Insulate & Protect with Quality Tapes Get your hands on 3M Tape! 3M now offers new and experienced electricians a chance to sharpen their skills with the complete
More informationWIMA FKS 3. Polyester (PET) Film and Foil Capacitors for Pulse Applications PCM 7.5 mm to 15 mm. Typical Applications. Construction.
WIMA FKS 3 Polyester (PET) Film an Foil Capacitors for Pulse Applications PCM 7.5 mm to 15 mm Special Features Pulse uty construction Accoring to RoS 2002/95/EC Typical Applications For general C-applications
More informationHVS S 15kV Class
Product HVS-3-1580S 15kV Class Transition Splice for 3/C to 3/C Extruded Dielectric (Poly/EPR) Power Cables Raychem Corporation Electrical Products 8000 Purfoy Road Fuquay-Varina, NC 27526 PII-54864, Rev
More information