Specifications. Safety Ratings. Standards. Safety Classification. Certifications. Safety Contacts. Auxiliary Contacts. Actuation Speed, Max.

Transcription

1 AUDIN - 8, avenue de la malle - 70 Saint Brice Courcelles - Tel : Fax : Web : http: info@audin.fr 80T Direct Opening Action Description The 80T Direct Opening Action limit switches have been designed for use in control reliable applications and safety applications per ISO 9. These limit switches utilize the same mounting dimensions as other NEMA style limit switches. The rugged metal construction and plug-in body are designed for use in harsh industrial environments. Direct Opening Action allows the normally closed contacts to open when the limit switch is actuated. This opening will occur even in the event of a contact weld condition, up to 0 Newtons. ATTENTION: To ensure that the normally closed (safety) contacts open, the limit switch actuator must be displaced beyond the point of Direct Opening Action (see specifications). Features Direct opening action Snap acting contacts ugged metal construction Long life and reliability Plug-in design NEMA,,, 6P/IP67 sealing Typical Applications Machine guards Access gates and doors Cranes or hoists Transfer stations ing tables obotic cells Specifications Safety atings Standards Safety Classification Functional Safety Data Note: For up-to-date information, visit Certifications EN, ISO 8, IEC/EN 600-, NFPA 79, EN 088, ISO 9, IEC/ EN , ANSI B.9, AS 0. Cat. Device per EN Dual channel limit switch suitable for Cat. or systems B0d = > x 06 operations at load PFH D = > x0-7 MTTFd = > 8 years Dual channel limit switch may be suitable for Performace levels Ple or Pld (according to ISO 8:006) and for use in SIL or SIL systems (according to IEC 606) depending on application characteristics CE Marked for all applicable directives, culus Listed, and TÜV for - and - circuit models Outputs Safety Contacts N.C. snap acting or N.C. snap acting Auxiliary Contacts N.O. snap acting or N.O. snap acting Thermal CurrentI lth 0 A ated Insulation Voltage 00V AC or 600V AC Switching Voltage, Min. Utilization Category A600/AC- (Ue) 600V 00V 0V 0V (le). A. A.0 A 6.0 A N600/DC- (Ue) 600V 00V 0V V (le) 0. A 0. A. A. A Operating Characteristics Actuation Speed,. 00 ft/min varies with applied loading and actuation method Actuation Speed, Min. 00 ft/min varies with applied loading and actuation method Actuation Frequency, operations per hour Mechanical Life 0 million cycles Environmental Enclosure Type ating NEMA, 6P,, and IP6/67 Operating Temperature [C (F)] (0 +0 ) Pollution Degree Physical Characteristics Housing Material Die-cast alloy Actuator Material Various metals or plastics Mounting #0 equal length fasteners Vibration Contact fragility ( inch peak-to-peak) Shock Contact fragility ( Gn pulses per axis) Conduit Entry / inch NPT or M0 Color Grey Usable for ISO 8:006 and IEC 606. Data other than B0d is based on: - Usage rate of op/0 mins., hrs/day, 60 days/year, representing 80 operations per year - Mission time/proof test interval of 8 years The safety contacts are described as normally closed (N.C.) i.e., with the guard closed, actuator in place (where relevant) and the machine able to be started. -Limit -Cat. No. Publication S7-CA00A-EN-P -

2 AUDIN - 8, avenue de la malle - 70 Saint Brice Courcelles - Tel : Fax : Web : http: info@audin.fr 80T Direct Opening Action AC Contact ating (imum per Pole, 0 or 60Hz, Circuits) -Limit NEMA ating A600 AC- AC Contact ating (imum per Pole, 0 or 60Hz, Circuits) NEMA ating A DC Contact ating (imum per Pole) NEMA ating Q00 DC Low Voltage DC V Amps resistive load -Cat. No. -6 Publication S7-CA00A-EN-P

3 AUDIN - 8, avenue de la malle - 70 Saint Brice Courcelles - Tel : Fax : Web : http: info@audin.fr ange of Operation 80T Direct Opening Action eset Operate Contacts eset Operate Contacts eset Contacts Product Selection Number of Circuits Lever Movement Lever Type Spring eturn Clockwise or Counter Clockwise Description 6 6 Typical Force/Torque to Operate 0. N m (.0 lb in), 6 Top Push oller Spring eturn Normal Operated N m (6. lb in), Side Push Vertical oller Spring eturn Normal Operated. N m (. lb in), 6 6 Side Push Horizontal oller Spring eturn Normal Operated 6 6. N m (. lb in), Lever Type Spring eturn Operate Contacts,.7 (0.06),.08 (0.08),.08 (0.08), Torque/Force to Operate Direct Opening Action 0.90 N m (8 lb in), 66.7 N (.0 lb),. N (.0 lb),. N (.0 lb), Top Push oller Spring eturn Operate Direct Opening Action [mm (in.)] imum Travel Side Push Vertical oller Spring eturn eset Contacts, 90 7,.9 (0.090),.9 (0.6),.9 (0.6),.99 (0.6).7 (0.6).7 (0.6) 0.6 (0.0),. (0.0),. (0.0), Side Push Horizontal oller Spring eturn Cat. No. Switch w/o Lever 80T-APD 80T-ATPD Complete Switch 80T-DPD 80T-DTPD Complete Switch 80T-KPD 80T-KTPD Complete Switch 80T-KPD 80T-KTPD -Limit -Cat. No. Modifications and Typical Levers page -9. Publication S7-CA00A-EN-P -7

4 AUDIN - 8, avenue de la malle - 70 Saint Brice Courcelles - Tel : Fax : Web : http: info@audin.fr 80T Direct Opening Action Typical Example of a Dual Channel Safety Application -Circuit -Circuit -Limit Negative Mode Operation Guard Closed To Safety elated Part of the Machine Control System Approximate Dimensions Dimensions are not intended to be used for installation purposes. 0. (.07) () #0- UNF (.98) 70.6 (.78) 8.7 (0.) Dia. Positive Mode Operation 6. (.).9 (.69) (0.9) Guard Closed. (0.0) 9. (0.7) Aux 6 Aux (.6). (.6) Safety Channel.7 (0.8) 0.6 (0.8) 9. (.) 8.7 (.) Safety Channel -Cat. No..9 (.8).7 (.7) 9.6 (0.77). (0.60) 9. (0.7) 9.6 (.) 0. (.9).6 (.0) 6.8 (.8).6 (0.). (0.9). (0.96).7 (0.).6 (0.) 0.6 (0.8) Plug-In Switch. (0.9) Dia. 0.8 (.0) Lever Type Head Top Push oller Head Side Push oller Head -8 Publication S7-CA00A-EN-P

5 AUDIN - 8, avenue de la malle - 70 Saint Brice Courcelles - Tel : Fax : Web : http: info@audin.fr 80T Direct Opening Action Modifications Metric Conduit Entry To order a limit switch with a 0 mm conduit entry, add the suffix S6 to the cat. no. Example: 80T-APDS6. Pre-wired Cable To order a factory-installed pre-wired type STOOW-A cable (- conductor), add the suffix Y plus the number of feet required. The standard cable length is. m ( ft). Extended cable lengths are available in multiples of. m ( ft) only. Example: To order a limit switch with a factory-installed. m ( ft) cable, the cat. no. would become 80T-APDY. To order a limit switch with a factory-installed. m (8 ft) cable, the cat. no. would become 80T-APDY8. Mini-Style Quick-Disconnect To order an 80T pre-wired limit switch with a -pin ( circuit) or pin ( circuit) mini connector, add the suffix J or J9 depending on desired wiring (J9 wiring not available for -circuit models) to the cat. no. Example: 80TAPDJ. -Pin Mini-Type eceptacle ( circuit) "J" Wiring "J9" Wiring Micro-Style Quick-Disconnect Micro quick-disconnects are available with a -pin -keyway AC or -pin single keyway DC. To order a limit switch with a AC micro quick-disconnect, add the suffix to the cat. no. To order a limit switch with a DC micro quick-disconnect, add the suffix D to the cat. no. Example: 80T APD and 80T APDD. Levers Type AC Micro QD DC Micro QD oller Material Diameter Width Cat. No. Nylon 9.0 (0.7) 7. (0.8) 80T-W Nylon 9.0 (0.7). (.0) 80T-WH Steel 9.0 (0.7) 6. (0.) 80T-WA Non-Adj. Cast Lever 8. mm (. in.) adius oller on Front Ball Bearing 9.0 (0.7).8 (0.) 80T-WB Note: Additional lever options are available in the Limit Switch section of the Sensors catalog. -Limit Pin Mini-Type eceptacle ( circuit) "J" Wiring ("J9" wiring not available for circuit) -Cat. No Publication S7-CA00A-EN-P -9