Integral E-stop the lid-mounted E-stop button provides emergency stopping capability at the extreme end of the installation
|
|
- Marianna Anthony
- 6 years ago
- Views:
Transcription
1 C R US Conforms to EN418, EN292, ISO/IEC1850, EN UL and C-UL listed ER019 Combination Rope and Push-Button Actuated Emergency Stop Switch Long rope spans of up to 75 m (24 ft.) for standard model and up to 125 m (410 ft.) for extended model means fewer number of switches required per application Heavy-duty housing the die-cast housing and stainless steel eye nut make the ER019 suitable for demanding industrial applications NEMA enclosure enables the ER019 switch to withstand water washdown cleaning Integral E-stop the lid-mounted E-stop button provides emergency stopping capability at the extreme end of the installation Status indicator the lidmounted status indicator makes the system easy to set up and to maintain the proper rope tension Variety of contacts three or four sets of contacts to satisfy the most demanding applications Vibration tolerant the snapacting switch contacts protect against nuisance tripping due to vibration Long life the ER019 switch is designed for a minimum of one million actuations Conduit beacons are available to provide visual status indication (order separately from accessories section) A o to the Engineering uide For in-depth information on safety standards and use. 22
2 Operation Rope-Status Indicator on Lid Contact Arrangements Eye-Nut Extended (mm) 2N/C + 1N/O Version /4 The rope status indicator makes the system easy to set up and maintain for spans up to 410 ft. 4N/C Version 1/2 41/42 Installation Hardware Available Kits The RTK Kits provide a revolutionary tensioning system that substantially reduces set-up time and provides all the necessary components in a single package. Installation Hardware All conventional hardware items are available and may be ordered as separate items. N/C + 1N/O Version 1/2 4/44 2N/C + 2N/O Version /4 4/44 RTK Tensioner RTK rippers 2
3 Operation (continued) Mounting Specifications Standard Model ER019 Rope grips PVC-covered steel rope Tensioner Eye bolts Thimble Spring SLACK TENSION Indicator Extended Model ft 2-m 24 ft 75m Note: Some installations may require a ER019 on both ends. Lifeline 4 TENSION SLACK Tension Indicator Cable grips Steel cable Tensioner Tensioner P. bolts E-Stop button ft 2-m ft m Reset knob For a guide to installing, see Proper Installation of Rope or Wire Pull Switches in the Engineering Section of this catalog. Applications Typical applications are on conveyor systems, across rotating machinery, and around hazardous areas. A o to the Engineering uide For in-depth information on safety standards and use. 24
4 Specifications Electrical Contact Configurations: Safety Contacts: Switching Ability AC: DC: Safety Contact ap: Auxiliary Contacts: Max Switching Current/Volt/Amp: Minimum Current: Electrical Life: Mechanical Mounting: Mounting Hardware: Actuator Travel for Positive Opening: Max Rope Span: Break Contact Min Force: Max Actuation Speed: Max Actuation Frequency: Case Material: Eye Nut Material: Wiring Entry: Weight: Color: Mechanical Life: Environmental All Models 2 N/C + 1 N/O, 2 N/C + 2 N/O, N/C + 1 N/O, 4 N/C 2 N/C, N/C, 4 N/C positive break 500 V 1 A, 250 V 2 A, 100 V 5 A 250 V 0.5 A, 125 V 1 A, 24 V 2 A 2 x 2 mm or x 2 mm or 4 x 2 mm 1 N/O or 1 N/C or 2 N/O 500 V/500 VA 5 V 5 ma DC 1 x 10 minimum Any position 4 x M5 screws See diagram on previous page 75 m (24 ft.) for standard model 75 to 125 m (24 to 410 ft.) for extended model < 125 N (28 lb.) N/A 1 cycle per sec Die-cast alloy Stainless steel x 0.5 in. NPT conduit 0 g (22.2 oz.) Yellow body, Red E-stop button 1 x 10 minimum Protection: IP (NEMA ) Operating Temperature: Cleaning: Compliance Standards: Approvals/Listings: -25 to 80 C (-1 to 17 F) Water washdown EN418, EN292, ISO/IEC1850, EN CE marked for all applicable directives, UL and C-UL Specifications are subject to change without notice. Note: The safety contacts of the Omron STI switches are described as normally closed (N/C) i.e., with the guard closed, actuator in place, and the machine able to be started. 25
5 Dimensions mm/in. Standard Model TO.72 MIN. MAX Extended Model 4 MOUNTIN HOLES CLEARANCE FOR M5 SCREWS EMERENCY STOP BUTTON RESET BUTTON TO.72 MIN. MAX MOUNTIN HOLES CLEARANCE FOR M5 SCREWS A o to the Engineering uide For in-depth information on safety standards and use. 2
6 Ordering Model Contacts Wiring Entry Part No. ER SN 2 N/C + 1 N/O x 0.5 in. NPT conduit ER SM 2 N/C + 1 N/O x M ER SN 2 N/C + 2 N/O x 1/2 in. NPT ER019-01SN N/C + 1 N/O x 1/2 in. NPT ER SN 4 N/C x 1/2 in. NPT ER SNE 2 N/C + 2 N/O x 1/2 in. NPT ER019-01SNE N/C + 1 N/O x 1/2 in. NPT ER SNE 4 N/C x 1/2 in. NPT RTK-5, Kit with 5 m of Red Steel Rope RTK-10, Kit with 10 m of Red Steel Rope RTK-15, Kit with 15 m of Red Steel Rope RTK-20, Kit with 20 m of Red Steel Rope RTK-0, Kit with 0 m of Red Steel Rope RTK-50, Kit with 50 m of Red Steel Rope RTK-75, Kit with 75 m of Red Steel Rope RTK Hardware Only (2 rippers and Tensioner) RTK Tensioner Only (with Allen Wrench) RTK ripper (2 Pack) RTK Extended Hardware Only (2 Tensioners, 2 rippers) Tensioner Kit (1 Turnbuckle, 8 Rope rips, 4 Thimbles) PVC-Covered Steel Rope (Red) 1/8 in. Diameter PVC-Covered Steel Rope (Yellow) 1/8 in. Diameter Eyebolt Replacement Eye Nut Spring Spare Lid with E-Stop Button Conduit Lights (see pages 29 & 240) Accessories (see page 28) 27
Integral E-stop the lid-mounted E-stop button provides emergency stopping capability at the extreme end of the installation
C R US Conforms to EN418, EN292, ISO/IEC1850, EN0947-5-1 UL and C-UL listed ER019 Combination Rope and Push-Button Actuated Emergency Stop Switch Long rope spans of up to 75 m (24 ft.) for standard model
More informationCompact Rope-Activated Emergency Stop Switch. DIN mounting pattern for a globally recognized mounting configuration
C R US Conforms to EN418, EN292, EN0947-5-1, EN50041, BS504, ISO1850 UL and C-UL listed ER4020 Compact Rope-Activated Emergency Stop Switch Compact size allows this switch to be used on smaller machines
More informationCable (Rope) Pull Switches Lifeline 4
Emergency Stop Devices Description The cable/push button operated system can be installed along or around awkward machinery such as conveyors and provide a constant emergency stop access. The is the only
More informationSafety Interlock Switch with Guard Door Locking. Narrow profile enables mounting to 2 in. square tubing or in applications with space restrictions
C R US Conforms to EN1088, EN60947-5-1, EN292, EN60204-1 UL and C-UL listed, B approved TL4024 Safety Interlock Switch with uard Door Locking High locking force of 1500 N (7 lb.) locks guard door shut
More informationHeavy-Duty Safety Interlock Switch with Guard Door Locking
C R US Conforms to EN1088, EN60947--1, EN292, EN60204-1 UL and C-UL listed TL8018- Heavy-Duty Safety Interlock Switch with uard Door Locking High locking force of,00 N (1,236 lb.) locks guard door shut
More informationonlinecomponents.com Compact Coded Magnetic Safety Interlock Switch and Control Unit
C Conforms to EN94-1, EN1088, EN60204-1 UL and C-UL listed Description R US Compact Coded Magnetic Safety Interlock Switch and Control Unit Dual channel, fully monitored system; meets Category 3 when single
More informationOperator Interface 4-1. General. Safety Switches. 4-Table of. Contents. Logic. Power. Operator Interface Table of Contents. 2-Opto-electronics
Table of Contents Emergency Operator Interface Overview...4-2 LIfeline ope Tensioner System (LTS)...4-4 Lifeline 3...4-6 Lifeline 4...4-10 Lifeline 4 Stainless Steel...4-16 Enabling Switches GripSwitch...4-24
More informationHeavy-Duty Hinge-Operated Safety Interlock Switch (Pneumatic) Cam limits guard door opening to 5 degrees before safety contacts are opened.
Conforms to EN1088, EN292, EN60947-5-1, EN60204-1 Description PHP6009 Heavy-Duty Hinge-Operated Safety Interlock Switch (Pneumatic) The PHP6009 is similar to the conventional HP6009 except that it gives
More informationAn Investment in Plant Floor Safety. 802C Safety Cable Pull Switches 802E Hinge Safety Interlock Switches 802F Safety Interlock Switches
An Investment in Plant Floor Safety 802C Safety Cable Pull Switches 802E Hinge Safety Interlock Switches 802F Safety Interlock Switches Notes 2 802C Cable Pull Safety Switches Safety and Application Safety
More informationCONTROLLERS & MODULES EMERGENCY STOP & STOP CONTROL SAFETY LIGHT SCREENS
SAFETY LIGHT SCREENS CONTROLLERS & MODULES EMERGENCY STOP & STOP CONTROL Emergency Stop & Stop Control Rope pull emergency stop switches, when used with steel wire rope, provide emergency stop actuation
More informationBL6009 Operation Contact rrangement or Shaft movement /12 / / mm contact Open contact closed Principle of Operation Interlockin
BL6009 C R US Conforms to EN1088, EN292, EN60947-5-1, EN60204-1 UL and C-UL listed BL6009 Manually Operated Bolt Safety Interlock Switch n uard locking manually operated bolt requires up to 20 seconds
More informationOperator Interface 4-1. General. Safety Switches. 4-Table of. Contents. Logic. Power. Operator Interface Table of Contents. 2-Opto-electronics
Table of Contents Emergency Cable Pull Switches Operator Interface Overview...4-2 LIfeline ope Tensioner System (LTS)...4-4 Lifeline 3...4-6 Lifeline 4...4-10 Lifeline 4 Stainless Steel...4-16 Enabling
More informationZB0050 / ZB0051 ZB0070 / ZB0071
Operating instructions Safety Rope Emergency Stop Switches UK ZB0050 / ZB0051 ZB0070 / ZB0071 7390877 / 02 08/2013 Contents 1 Safety instructions...3 2 Installation / set-up...4 2.1 Applications...4 2.2
More informationMachine & Process Safeguarding Solution Selection Guide
Machine & Process Safeguarding Solution Selection Guide 2015-2016»» Expert Area»» Light Curtains»» Laser Scanners»» Programmable Safety Systems»» Mats and Edges»» Door Switches»» Emergency Stop Devices»»
More informationSafety rope switches with reset for emergency stop
Safety rope switches with reset for emergency stop Selection diagram 8 8 83 ACTUATORS ACTUATORS CONTACT BLOCKS 18 9 21 1NO+ FP FD FL FC 22 33 34 LED signalling light CONDUIT ENTRIES For other available
More informationROPE THIMBLE P/N STP-40-SS P/N STP-50-SS PULL WIRE SHOULD BE STRAIGHT AND CLEAR OF OBSTRUCTIONS WIRE SUPPORT P/N STG-200, STG-200-SS
1 P/N: PS-P INSTALLATION & SETTING INSTRUCTIONS YELLOW INDICATION FLAG: P/N STP-F The Indication Flag should be fitted when there is more than one switch used on the conveyor as noted in AS1755-2000 Clause
More informationSERIES 1000 ELECTRIC ACTUATORS
DESIGN FEATURES Series 1000 On-Off Rotary Electric Actuator Basic Actuator: Torque Output Range: 347in-lb to 17,359in-lb Housing: NEMA 4X, watertight, corrosion-resistant, robust aluminum die cast Electric
More informationInstallation Instructions - K-Safe-T-Rip Belt Rip Detector
Kinder Australia product: Preferred Setup Instructions Note: The correct Belt Rip pick up detachment operation of the Rip Socket, is in a sideways motion to the attachment point. This means once the Socket
More informationD4B- N. Safety Interlock Switches. Safety Limit Switch. Specifications. Standards and EC Directives. Certified Standard Ratings D4BN
Safety Interlock Switches D4B- N D4BN Safety Limit Switch Snap-action contact with certified direct operation. mechanism (NC contacts only) added to enable contacts when faults occur, such as fused contacts.
More informationCompact Limit Switches
Compact AEMG Series Compact Die-cast metal housings 3-meter cable on all units N.O. and N.C. contact on all units Compact size with standard 5 mm hole spacing Wide offering of head actuators Epoxy resin-filled
More informationIP69K Stainless Steel Safety Interlock Switches
IP69K Stainless Steel Safety Interlock Switches Designed specifically for Food Processing, Packaging, Pharmaceutical and Petro-Chemical industries Suitable for CIP Cleaning Fully Stainless Steel IP69K
More informationPower Contactor with Mirror Contacts
LLAME SN COSTO Force-Guided Relays Power Contactor with Mirror Contacts Contents Selection Guide 2 Force-Guided Relays G7SA G7S- -E 3 8 Power Contactor with Mirror Contacts J7KNA-AR G7Z 11 15 1 LLAME SN
More informationGKR/GKL Series Dual Entry Solenoid Key Operated Safety Interlock Switch
Series Dual Entry Solenoid Key Operated Safety Interlock Switch FEATURES Solenoid power to lock or power to unlock Side or top key entry Separate switches for key position and solenoid status Available
More informationCommand devices Pull-wire emergency stop switches One-side operation ZS 71 range Schmersal Industrial Switchgear.
.1.1.1 One-side operation ZS 71 range 40 30 ø10 10 22 6 8 53,5 18 24 105 33 56 Pg 13,5 52 17,5 42 15 Features To EN 418 Metal enclosure 2 contacts Small body 2 cable entries Various spring force variants
More informationPressure Switch SOR. Sifter ready to run: Adequate pressure to switch. Sifter not ready to run: Either loss of air pressure, or open guard.
Switch SOR SOR (TB) 1 of 1 The wiring for the pressure switch requires some explanation. Great Western sifters use the SOR pressure switch to detect a lack of pressure. Black is normally open, and red
More informationCAUTION CM-SE CM-S21 CM-S41
CAUTION Safety, Technology & Innovation CM Series Operating Instructions for, CM-S21,, CM-S11, CMS31 CM Series Safety System This information is designed to help suitably qualified personnel install and
More informationIDEM Solenoid Interlock Safety Switches
KLP/KLM/KL3-SS Series Housing Solenoid locking, tongue (key) interlock operated Power to unlock 90 degree adjustable head One (KLP) or three (KLM, KL3-SS) 1/2 in. female NPT conduit opening 30mm mounting
More informationDA-053 Series. Overview. Applications. Features & Benefits. Datasheet. 53lb-in (6 Nm), Non-Spring Return Damper Actuators
Datasheet 53lb-in (6 Nm), Non-Spring Return Damper Actuators Overview The direct-coupled fail-safe/failin-place electronic actuators are designed for modulating, two position, and floating control of laboratory
More informationSafety Switches Machine Safety
Safety Switches Machine Safety We develop products and solutions for machine safety The fact that the leading power and automation technology company, ABB, and a leader in machine safety, Jokab Safety,
More informationFor full product information, visit Use the SpeedSpec Code or scan the QR Code for quick access to the specific web page.
Courtesy of CMA/Flodyne/Hydradyne Motion Control Hydraulic Pneumatic Electrical Mechanical (00) 6-0 www.cmafh.com Safety Interlock Switches DSL-N Super Small Class 6-Contact uard Lock Safety-Door Switch
More informationBig Hermet Pressure Switches
This instruction provides information for Installation, Process Connection, Electrical Connection, and Calibration of SOR Pressure Switches with hermetically sealed, explosion proof electrical switching
More informationSafety rope switch without reset for simple stop
afety rope switch without reset for simple stop election diagram FP 4-M2 FD 4-M2 FL 4-M2 FR 4-M2 FM 4-M2 FX 4-M2 FZ 4-M2 ACTUATOR 9 ACTUATOR 9 0 CONTACT BLOCK 1 9 21 1NO+ FP FD FL FC 33 34 CONDUIT ENTRIE
More informationCommercial Actuator Selection Chart Non-Spring Return
Commercial Actuator Selection Chart Non-Spring Return Control Signal Position Feedback Torque Aux. Switches Actuator Model 4 VAC Power Input On/Off Tri-State Floating 0 to 0 VDC 0 to 0 ma* 4 to 0 ma 0
More informationAPS & APIS ATEX AIRPOWER SWITCH BOXES FEATURES DESCRIPTION
page 1 DESCRIPTION The switch boxes are suitable for rotary actuators and are the industry leader in versatility, quality and approvals gained. Models include APS standard range with a variety of outputs
More informationBulletin 871P Can Sensors
Bulletin 871P Can Sensors Description Bulletin 871P inductive proximity can sensors are self-contained solid state devices, designed specifically for sensing size 202 to 704 metal cans without physical
More informationControl Equipment. ATHEX bvba Tel: +32 (0) Fax: +32 (0) Alpenroosbaan 2, 2900 Schoten, België
Control Equipment 01616E00 Position switches are used to monitor the position of moving parts of machines and plant. Can be used in safety circuits, as the device satisfies EN 60 947-5-1/DIN VDE 0660 part
More informationVACUUM A RESOURCE FOR EVERYONE
Vacuum grippers VACUUM PRODUCTS INNOVATORS IN VACUUM TECHNOLOGY CATALOG VERSION 5.0 VACUUM A RESOURCE FOR EVERYONE www.piab.com Accessories Suction cups Vacuum pumps PVA VACUUM SWITCHES, INDUCTIVE UNIVERSAL
More informationElectric Actuators Maximum in-lbs
Maximum 14040 in-lbs NEMA 4, 4X, 7 ER- Series Features ISO / DIN valve interface Mounting in any position Thermal overload protection (AC & DC except 12 VDC) Friction brake (standard for AC motors except
More informationRope safety switches with reset for emergency stop
Rope safety switches with reset for emergency stop Description and technical data hese rope operated safety switches are installed on machines or conveyor belts, to activate the emergency stop of the machine
More informationElectric Actuators Maximum in-lbs
Maximum 14040 in-lbs NEMA 4, 4X, 7 ER- Series Features ISO / DIN valve interface Mounting in any position Thermal overload protection (AC & DC except 12 VDC) Friction brake (standard for AC motors except
More informationD4BL. Protective Doors Are Locked Until Machines Completely Stop Operating. Guard Lock Safety-door Switch. Model Number Structure.
Guard Lock Safety-door Switch Protective Doors Are Locked Until Machines Completely Stop Operating A mechanical lock is applied automatically when the Operation Key is inserted. A high level of safety
More informationMF /MS Series
MF41-6153/MS41-6153 Series 24 Vac, Three-position/Modulating Non-spring Return Rotary Electronic Damper SmartX Actuators General Instructions Description The direct-coupled, 24 Vac, non-spring return electronic
More informationSpecifications. Safety Ratings. Standards. Safety Classification. Certifications. Power Supply
Safety Guard Locking Atlas 5 General 1-2-Opto-electronics 3-Interlock Logic Description The Atlas 5 is a positive-mode, tongue-operated guard-locking interlock switch that locks a machine guard closed
More informationHinged Safety Door Switch
Hinged Safety Door Switch Polymer housing, IP65, and slow-action contacts with positive opening. Two actuator types are available: Shaft Arm lever Arm lever type can be adjusted to allow a right (180 ),
More informationForce Control Switches
Force Control Switches Simple and ultra-reliable passive sensors provide switch contacts that open or close at your specified loads. Overload protection Slack-line detection Up to four switches on a single
More informationVA-640GSX024P. Overview. Applications. Features & Benefits. Datasheet. Large Globe Valve Actuators
VA-640GSX024P Datasheet Large Globe Actuators Overview The VA-640GSX024P Electronic valve actuators receive a 0 to 10 VDC or 4 to 20 ma control signal to proportionally control the valve. Applications
More informationSafety Interlock Switches
Safety Interlock Switches D4BL D4BL uard Lock Safety-Door Switch Release protective cover locks using controller signals or pushbutton switches after the cutting tool stops moving due to inertia A mechanical
More informationSafety rope switch with reset for emergency stop
Safety rope switch with reset for emergency stop Selection diagram 8 8 83 ACTUATORS ACTUATORS CONTACT BLOCKS 18 9 21 1NO+,, FP FD FL FC 22 33 34,, CONDUIT ENTRIES Threaded conduit entries (standard) With
More information3-36. General 1-2-Opto-electronics 3-Interlock. Switches. Operator. Interface. Logic Power. Safety Switches Guard Locking Switches 440G-MT
Safety Guard Locking 440G-MT General 1-2-Opto-electronics 3-Interlock Logic Description The 440G-MT solenoid switch is a positive mode, tongue operated guard locking interlock switch that locks a machine
More informationMICRO SWITCH Solenoid Safety Interlock Switches GKL/R Series Issue 2. Datasheet
MICRO SWITCH Solenoid Safety Interlock Switches GKL/R Series DESCRIPTION MICRO SWITCH GKL/R Series switches are a heavy-duty key operated solenoid safety interlock switch incorporating a key trapping mechanism.
More informationany other M6 hole. The Tether Point Wire is approximately 1m STR- SSB- (1, 2, 3, 4, 5 or 6) -TP
1 Electric Control Products: Preferred Setup Instructions Note: The correct Belt Rip pick up detachment operation of the Rip Socket, is in a sideways motion to the attachment point. This means once the
More informationLimit Switch - Safety Type with pull button reset Plastic Body IP65 and Metal Body IP66
Limit Switch - Safety Type with pull button reset Plastic Body IP65 and Metal Body IP66 Double Insulation (for thermoplastic type) High mechanical resistant Degree of protection IP65 (thermoplastic) IP66
More informationProduct Cross Reference
AF120 US, AF120-S US AF230 US, AF230-S US AFBUP, AFBUP-S, AFXUP, AFXUP-S Torque 133 in-lb [15 Nm] minimum 180 in-lb. [20 Nm] minimum OPERATION Running Time Noise Level < 75 seconds
More informationED SERIES SAFETY LIMIT SWITCH Description
Description The ED series safety limit switches conform to EN 50047 and have been developed to provide a range of options including plastic cases in various sizes, a choice of snap acting, slow break/make
More informationInstallation Instructions: K-Safe-T-Drift
Micro Switch Installation Sheet Micro Switch Cam Rest Position See Vertical or Horizontal Arm Installation Instructions for Micro Switch activation sequence. Micro Switch Cam Adjustment Screw SW 1 Micro
More informationE3 VISE ACTION Compression Latch
38 E3 VISE ACTION Compression Latch Overview First 90 0 turn: rotates behind frame The door is now latched against opening Then as you complete the half-turn motion, the shaft and cam compress to pull
More informationED SERIES SAFETY LIMIT SWITCH
Description The ED series safety limit switches conform to EN 547 and have been developed to provide a range of options including plastic cases in various sizes, a choice of snap acting, slow break/make
More informationLimit Switch D4D- N. Small, Economical Switch Featuring a Positive Opening Mechanism and Conforming to the CE Mark
Limit Switch Small, Economical Switch Featuring a Positive Opening Mechanism and Conforming to the CE Mark Features positive opening mechanism (NC contacts only) that opens contacts, thus preventing faulty
More informationABB Jokab Safety Safety switches & emergency stops Food, beverage, pharmaceutical & chemical industries
ABB Jokab Safety Safety switches & emergency stops Food, beverage, pharmaceutical & chemical industries Disclaimer: This document and any attachments may include suggested specifications, drawings, schematics
More informationD4B-N. uce. Safety Limit Switch. Positive Action Limit Switches with Direct Drive Contacts for Critical Switching Applications
Safety Limit Switch Positive Action Limit Switches with Direct Drive Contacts for Critical Switching Applications H Snap-action contact for accurate switching with safe operation via direct drive positive
More informationElectric Actuated Ball Valves 2-way Stainless Steel, Full Port 1/4 to 2 inch NPT
Electric Actuated Ball Valves 2-way Stainless Steel, Full Port 1/4 to 2 inch NPT SERIES Features Full Port 16 Stainless Steel ball valve LED light gives continuous status indication IP67 weatherproof polyamide
More information3SE03 North American Limit Switches
General Information Features Modular plug-in Prewired receptacle with pin connector Prewired cable Features UL Listed, CSA Certified. UL File: E47512 All Metal Captive Screws. Keyed, Four-Directional Head.
More informationLIMIT SWITCHES & POSITION INDICATION
LIMIT SWITCHES & POSITION INDICATION Engineering Creative Solutions for Fluid Systems Since 1901 TECHNOPOLYMER LIMIT SWITCH DESCRIPTION The Pratt Industrial MS41-2 Limit Switch Box represents a new dimension
More informationLK Position Switches TECHNICAL DATASHEET.
LK Position Switches Technopolymer housing, one conduit entry Protection degree IP6 according to EN 60529 contact blocks available 46 actuators available Versions with stainless steel external parts Versions
More informationXCS Safety Interlock Selection
Steven Engineering-2 Ryan Way-South San Francisco, CA 980-6370-Main Office:(650)588-9200-Outside Local Area:(800)258-9200-www.stevenengineering.com Selection Plastic, Double, Turret Head c, Type, locking
More informationModel 550 Series Vibration Switches
OPERATION MANUAL Vibration Switches Includes: 550 550M 550-X 550M-X Page 2 SECTION TITLE PAGE 1. INTRODUCTION... 2 2. FEATURES... 3 3. WIRING... 4 4. ANALOG METER... 4 5. TESTING... 4 6. INSTALLATION...
More informationSafety Interlock Switches
Interlock Switches Interlock Switches Selection and Application of Switches..... 186 Flat Pack Style Switches................... 191 Limit Switch Style Switches................. 199 Locking Style Switches....................
More informationF E - Electromagnetic Safety Switch With Separated Actuator. 1 Code Construction. Casing: P: Plastic casing
Electromagnetic Safety Switch With Separated 1 Code Construction F E - Casing: P: Plastic casing Cable inlet: 5: 3 x (M20x1) Type of FEP: E: Electrical block ( b with excited ) M: Mechanical block ( b
More informationElectromechanical Level Control
Electromechanical Level Control Catalog 9034CT9701R2/08 08 Class 9036, 9037, and 9038 and Class 9049 Accessories CONTENTS Description..............................................Page Selection Guide..............................................
More informationHow to Select the RE Industrial Actuator Part Number
How to Select the RE Industrial Actuator Part Number RE 10 T F 2 Torque (in-lb) 1.5 150 3 300 6 600 8.5 850 10 1000 15 1500 20 2000 25 2500 30 3000 Reversing Electronic Torque Maximizer (optional) Increases
More informationManual Reset Limit Switch
Manual Reset Limit Switch A Series of Pull-reset Models Available Ideal for elevators (EN81), escalators (EN115), and conveyors. Positive opening mechanism insulation approved by TÜV and BIA. and double
More informationSafety Limit Switch
Safety Limit Switch D4B-@N CSM_D4B-_N_DS_E_5_1 Snap-action contact with certified direct operation certification. Maintenance, seal, and resistance to shock increased and direct mechanism added. Three-conduit
More informationUniversal Gate Box with Safety Interlocking TYPE: UGB-KLT FEATURES & APPLICATION:
SECTION 6 Universal Gate Box with Safety Interlocking TYPE: UGB-KLT FEATURES & APPLICATION: 78 Application: IDEM Universal Gate Boxes (UGB-KLT) provide high level RFID coded interlocking and machine control
More informationLimit switches. 7 Page 71. Presentation. OsiSense XC Basic Compact design, plastic, with reset knob, types XCNR and XCNTR. b XCNR.
Presentation Compact design, plastic, with reset knob, types XCNR and XCNTR b XCNR with cable entry v With head for linear movement (plunger) Page v With head for rotary movement (lever) Page b XCNTR with
More informationStandard Interlock Safety Switches
Subminiature Only 78 x 30 x 1m Two actuator entrances provide flexibility for installation options Integrated molded cable reduces wiring time IP67 (IEC60529) Direct Opening Action Actuators comply with
More informationLimit Switches - Safety Type Plastic Body IP65 and Metal Body IP66
Limit Switches - Safety Type Plastic Body IP65 and Metal Body IP66 Product Description They are developed in order to be used for following operations: For monitoring and protection of industrial machines,
More information9012G Pressure and 9016G Vacuum Switches
Selection Guide 90G and 906G Vacuum Switches Type of installation Control circuits Power circuits Applications Media controlled Type of operation Air, water, hydraulic oils, () gases, steam Fixed differential:
More informationProduct Overview Safety Engineering electro-mechanical
Product Overview Safety electro-mechanical EN Safety Enabling Switches Enabling switches ZSE/ZXE Enabling switches Enabling switches ZSM 1) Approvals Features/specific advantages AS-Interface Safety at
More informationSERIES 1000 ELECTRIC ACTUATORS
SERIES 1000 ELECTRIC ACTUATORS DESIGN FEATURES Series 1000 On-Off Rotary Electric Actuator Standard Features SERIES 1000 ELECTRIC ACTUATORS Torque Output Range: 434in-lb to 17,700in-lb Housing: NEMA 4,
More information2006 Series Geared Rotary Limit Switches
SUPERIOR DESIGN AND OPERATING FEATURES Quality parts make each Geared Rotary Limit Switch highly dependable. The limit switch s ½" input shaft is connected to a worm gear. Adjustable self-lubricating nylon
More informationElectric Actuated 3-Way Ball Valves T-Port Diverter, Stainless Steel, Full Port 1/4 to 2 NPT
T-Port Diverter, Stainless Steel, Full Port 1/4 to 2 NPT Features Full Port direct mount 316 SS ball valve Functions as a diverter valve 1000 PSI working pressure at 100 F (38 C) Visual valve position
More information3SE03 North American Limit Switches
General Information Features Modular plug-in Prewired receptacle with pin connector Prewired cable Features UL Listed, CSA Certified. UL File: E47512 All Metal Captive Screws. Keyed, Four-Directional Head.
More informationBelt Conveyor Pull Rope Switch Types HEN, HEK and SEM OPERATING INSTRUCTIONS
Belt Conveyor Pull Rope Switch Types HEN, HEK and SEM OPERATING INSTRUCTIONS 2 CE-Sign and Conformity The device meets the requirements of the valid European and national regulations. Conformity has been
More informationProcess Protection Motion sensors
Overview MFA 4p motion failure alarm controller is a highly sensitive single setpoint motion sensor system, used with Milltronics MSP probes. Application The MFA 4p detects changes in the motion and speed
More informationElectric Actuated Ball Valves 2-way Stainless Steel, Full Port 1/4 to 2 inch NPT
Electric Actuated Ball Valves 2-way Stainless Steel, Full Port 1/4 to 2 inch NPT SERIES Features Full Port 16 Stainless Steel ball valve LED light gives continuous status indication IP67 weatherproof polyamide
More informationDuraDrive MF /MS Series Non-spring Return Rotary Electronic Damper Actuators 24 Vac Three-position/Modulating
General Instructions DuraDrive MF4-653/MS4-653 Series Non-spring Return Rotary Electronic Damper Actuators 4 Vac Three-position/Modulating Description The DuraDrive direct-coupled, 4 Vac, non-spring return
More informationRP-4000 Reserve Power Control
Instruction Manual IM-0580 RP-4000 Reserve Power Control Table of Contents General Information... 2-3 Introduction... 2 Cautions... 2 Receiving/Inspection... 2 Storage... 2 Equipment Return... 2 Identification
More informationCommercial Pressure and Float Switches for Power Circuits Catalog 9034CT9701R01/11 Class 9013, 9036, 9037, 9038
Commercial Pressure and Float Switches for Power Circuits Catalog 9034CT9701R01/11 Class 9013, 9036, 9037, 9038 TM Table of Contents Table of Contents SELECTION GUIDE PUMPTROL COMMERCIAL PRESSURE SWITCHES...
More informationElectric Actuated Ball Valves 3-Piece Stainless Steel, Full Port 1/4 to 3 inch NPT
Electric Actuated Ball Valves 3-Piece Stainless Steel, Full Port 1/4 to 3 inch NPT SERIES Features Direct mount Full Port 316 Stainless Steel ball valve 3-piece swing out body designed for easy maintenance
More informationProduct Overview Safety Engineering electro-mechanical
Product Overview Safety electro-mechanical EN Safety Enabling Switches Enabling switches ZSE/ZXE Enabling switches ZSA/ZSB Enabling switches ZSM 1) Approvals Features/specific advantages three-stage built-in
More informationMULTI 9 System Catalog IEC Rated C60N/H/L Circuit Breakers
IEC Rated C60N/H/L Circuit Breakers Standard Features Fast Closing Allows increased withstand to the high inrush currents of some loads Trip-free mechanism: Contacts cannot be held in the on position when
More informationLocking Style mm AUTOCAD, STEP, IGES & PDF. Kits Actuator Type Interlock Kit Model * Contact(s) SI-LS42DMSG SI-LS42WMSG
Locking Style Spring or Solenoid Locking Two locking mechanisms are available: spring lock with energized solenoid release and energized solenoid lock with spring release. Rigid and flexible in-line actuators
More informationMotion sensors. Milltronics MFA 4p 6/17. Overview
Siemens AG 2013 Overview MFA 4p motion failure alarm controller is a highly sensitive single setpoint motion sensor system, used with Milltronics MSP probes. Application The MFA 4p detects changes in the
More informationXCKJ390559H29EX limit switch XCKJ - round rod Ø 6 mm - 2NC + NO - ATEX/IECEx
Characteristics limit switch XCKJ - round rod Ø 6 mm - 2NC + NO - ATEX/IECEx Main Range of product OsiSense ATEX D Series name Standard format Product or component type Limit switch Device short name XCKJ
More informationStandard Rope Pull Switches. With and Without Latching Function SIEM2 SID SIN SGC SI88. The field of application for these rope pull switches includes
Standard Rope Pull Switches With and Without ing Function SEK SEM2 SIEM2 SD SID SID SIN SGC SI88 Because of their specifications governed by corresponding standards (see Cable Safety Pull Switches SRM/SR),
More informationPRODUCT SPECIFICATION. Foot Switches. Series.
PRODUCT SPECIFICATION Foot 46 Series www.wernerelektrik.com Foot Switch Structures...1 Technical Data...2 Model Number Structure - Foot...3 Dimensions...4 Precautions... Foot WERNERS are Rigorous and tough.
More informationProcess Protection Motion sensors
Overview MFA 4p motion failure alarm controller is a highly sensitive single setpoint motion sensor system, used with Milltronics MSP probes. Design Benefits Up to 100 mm (4 inch) gap between target and
More informationMiscellaneous Products
Conveyor Products Safe-T-Pull 2 Safe-T-Pull (stainless Steel) 4 Safe-T-Limit - Remote Isolation 6 Safe-T-Drift 8 Safe-T-Drift (Stainless Steel) 10 Safe-T-Rip 12 Safe-T-Rip (Stainless Steel) 14 Pull-Safe
More informationNon-Spring Return EconoDrive Floating Actuator
MF4D-0x Series Non-Spring Return EconoDrive Actuator EconoDrive overshaft actuators are designed to provide an economical and reliable solution for many overshaft damper and ball valve requirements. All
More informationLimit Switches E47 Precision Switches
1 PG.0C.0.T.E July 0 E47 Precision The Cost-Effective Solution for Highly Accurate Switching Applications Contents Overview...................... 1 Model Selection, Basic Switches................ 2 Model
More information